June 2008 - openSUSE Users - openSUSE Mailing Lists

[opensuse] powersafe control (switch off display)
by Anton Moiseev 09 Jun '08

09 Jun '08

Hello, Where can I set the time for the display to switch off after inactivity (with no mouse and keyboard actions). Actually, main problem is that kmplayer does not prevent the display from switching off after some time during watching film. Thank's -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] results of hard disk configuration survey
by Martin Schmidkunz 09 Jun '08

09 Jun '08

Hi everybody, the results of the hard disk configuration survey are available at http://en.opensuse.org/UX#View_results_of_previous_surveys Big thanks to all of you who took the time in participating! Your answers were very helpful! Have a lot of fun, Martin -- Martin Schmidkunz User Experience Specialist martin.schmidkunz(a)novell.com +49 (0) 911 740 53-346 ----------------------------------------------------------------- SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) ----------------------------------------------------------------- Novell, Inc. SUSE® Linux Enterprise 10 Your Linux is ready http://www.novell.com/linux -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

12 19

[opensuse] Suse syslog redirects to a Windows server
by bhoomikasc 09 Jun '08

09 Jun '08

Hi, I have a Novell suse 10 linux box which runs syslog-ng. I am trying to redirect the syslog messages to a Windows 2003 server. I have setup the syslog-ng.conf (changes are in italics): ... source src { # # include internal syslog-ng messages # note: the internal() soure is required! # internal(); # # the following line will be replaced by the # socket list generated by SuSEconfig using # variables from /etc/sysconfig/syslog: # @SuSEconfig_SOCKETS@ # # uncomment to process log messages from network: # udp(port(514));}; .... destination mail { file("/var/log/mail"); }; destination postfix_mail { udp("10.141.52.15" port (514)); }; log { source(src); filter(f_mail); destination(mail); }; log { source(src); filter(f_mail); destination(postfix_mail); }; The Windows server is open on udp port 514. But it doesnt seem to reflect anything on the Windows box? Do I need to make any more changes on the Windows end? Thanks for all your help in advance. -- View this message in context: http://www.nabble.com/Suse-syslog-redirects-to-a-Windows-server-tp17740026p… Sent from the openSUSE community mailing list archive at Nabble.com. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Update problems
by Chris Arnold 09 Jun '08

09 Jun '08

Using 10.3 64-bit and today the suseupdater shows 4 updates: 2 amarok, which i do not even have installed and gdm and libcurl4. I am trying to install these updates but it never seems to update. Just goes back to red exclamation and those same 4 updates show as needing to be updated. Is this a problem in 64 bit? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 3

[opensuse] Panel problem
by Carl Spitzer 09 Jun '08

09 Jun '08

In KDE when I open a program a little rectangle box shows in the panel. In Gnome this used to happen. Its working on another machine in KDE and Gnome. How do I get it back. See attachment CWSIV

1 0

[opensuse] Default user in KDM?
by Niki Kovacs 09 Jun '08

09 Jun '08

Hi, I have openSUSE 10.3, the KDE version. On the machine, there are three users. Q: how can I select one user as "preselected", e. g. the default user on login? As far as I know, openSUSE has a highly customized version of KDM, and apparently, KControl isn't the place to configure it. But where is it? Cheers, Niki -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] openSUSE 10.3: Windows connection to PPTPD freezes
by Theodore Tolstoy 09 Jun '08

09 Jun '08

Hi! I've got a problem communicating to Windows 2003 Terminal Server(TS) from Windows XP client through openSUSE gate's PPTPD service. Authentication completes OK and TS login screen shows up but in several seconds connection freezes and I have to reconnect to attempt TS login again. MESSAGES log looks as follows: May 30 13:05:06 gate pptpd[5300]: CTRL: Client aa.bb.cc.dd control connection started May 30 13:05:06 gate pptpd[5300]: CTRL: Starting call (launching pppd, opening GRE) May 30 13:05:06 gate pppd[5301]: pppd 2.4.4 started by root, uid 0 May 30 13:05:06 gate pppd[5301]: Using interface ppp3 May 30 13:05:06 gate pppd[5301]: Connect: ppp3 <--> /dev/pts/3 May 30 13:05:09 gate pptpd[5300]: CTRL: Ignored a SET LINK INFO packet with real ACCMs! May 30 13:05:09 gate pppd[5301]: MPPE 128-bit stateless compression enabled May 30 13:05:11 gate pppd[5301]: found interface eth1 for proxy arp May 30 13:05:11 gate pppd[5301]: local IP address 10.1.2.254 May 30 13:05:11 gate pppd[5301]: remote IP address 10.1.2.250 May 30 13:05:11 gate pppd[5301]: Script /etc/ppp/ip-up finished (pid 5303), status = 0x0 May 30 13:05:41 gate kernel: mppe_decompress[3]: osize too small! (have: 1004 need: 1005) May 30 13:05:41 gate kernel: klogd 1.4.1, ---------- state change ---------- May 30 13:06:41 gate pppd[5301]: LCP terminated by peer (1#VM-^E^@<M-Mt^@^@^@^@) May 30 13:06:41 gate pppd[5301]: Connect time 1.5 minutes. May 30 13:06:41 gate pppd[5301]: Sent 9819 bytes, received 23374 bytes. May 30 13:06:41 gate pptpd[5300]: CTRL: Reaping child PPP[5301] May 30 13:06:41 gate pppd[5301]: Modem hangup May 30 13:06:41 gate pppd[5301]: Connection terminated. May 30 13:06:41 gate pppd[5301]: Script /etc/ppp/ip-down finished (pid 5333), status = 0x0 May 30 13:06:41 gate pppd[5301]: Exit. May 30 13:06:41 gate pptpd[5300]: CTRL: Client aa.bb.cc.dd control connection finished But sometimes it looks like this: Jun 4 19:38:55 gate pptpd[23632]: CTRL: Client aa.bb.cc.dd control connection started Jun 4 19:38:55 gate pptpd[23632]: CTRL: Starting call (launching pppd, opening GRE) Jun 4 19:38:56 gate pppd[23633]: pppd 2.4.4 started by root, uid 0 Jun 4 19:38:56 gate pppd[23633]: Using interface ppp0 Jun 4 19:38:56 gate pppd[23633]: Connect: ppp0 <--> /dev/pts/0 Jun 4 19:38:59 gate pptpd[23632]: CTRL: Ignored a SET LINK INFO packet with real ACCMs! Jun 4 19:38:59 gate pppd[23633]: MPPE 128-bit stateless compression enabled Jun 4 19:39:01 gate pppd[23633]: found interface eth1 for proxy arp Jun 4 19:39:01 gate pppd[23633]: local IP address 10.1.2.254 Jun 4 19:39:01 gate pppd[23633]: remote IP address 10.1.2.250 Jun 4 19:39:01 gate pppd[23633]: Script /etc/ppp/ip-up finished (pid 23635), status = 0x0 Jun 4 19:45:08 gate pppd[23633]: LCP terminated by peer (/M-8z^K^@<M-Mt^@^@^@^@) Jun 4 19:45:08 gate pppd[23633]: Connect time 6.2 minutes. Jun 4 19:45:08 gate pppd[23633]: Sent 907851 bytes, received 239737 bytes. Jun 4 19:45:08 gate pppd[23633]: Script /etc/ppp/ip-down finished (pid 23679), status = 0x0 Jun 4 19:45:08 gate pptpd[23632]: CTRL: Reaping child PPP[23633] Jun 4 19:45:08 gate pppd[23633]: Modem hangup Jun 4 19:45:08 gate pppd[23633]: Connection terminated. Jun 4 19:45:08 gate pppd[23633]: Exit. Jun 4 19:45:08 gate pptpd[23632]: CTRL: Client aa.bb.cc.dd control connection finished Anybody can give comments or clue how to solve this problem? Here's my options.pptp file: # # Lock the port # lock # # We don't need the tunnel server to authenticate itself # noauth # # Turn off transmission protocols we know won't be used # nobsdcomp nodeflate # # We want MPPE # require-mppe # # We want a sane mtu/mru # mtu 1000 mru 1000 # # Time this thing out of it goes poof # lcp-echo-failure 10 lcp-echo-interval 10 # TVT #debug proxyarp refuse-pap require-mschap-v2 ms-dns 10.1.1.128 -- SY, TVT -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Re: Checkinstall dropped from Opensuse
by Joachim Schrod 09 Jun '08

09 Jun '08

Philipp Thomas wrote: > On Sun, 8 Jun 2008 16:33:43 -0700, John Andersen wrote: > > Be it as it may, I'd like people to propose packages that they would > like to be packaged so that I have a list to choose from. I won't participate in your workshop (I know how to make RPMs), but I can chime in with proposals you might want to make: Packages: uemacs, logsurfer, ngrep, traceroute-lbl, xpaint, GNU mailutils, calc. CPAN modules. Firefox plugins (hairy to install sytem-wide and package them, IMO). Joachim -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Joachim Schrod Email: jschrod(a)acm.org Roedermark, Germany -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] Voice recorder
by Manne Merak 09 Jun '08

09 Jun '08

Hi, I am looking for a small app to do voice recoding using my laptop microphone (recording meetings etc). I know about a 1000 years ago there was an app shipped with Eudora that recorded messages. It created very small files by filtering only voice and ignoring silences (cutout). Anyone know of a simple recorder like this? Using mencoder to do this will be great, if someone can help me get the parameters in a row. Manne -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 4

[opensuse] Disabling Auto-update in 10.3
by Ian 09 Jun '08

09 Jun '08

I have a machine running 10.3 + Gnome that I don't want to run the automatic updater when a user logs in. I've searched for a way to disable the updater, but can't seem to find anything - except a posting where someone asked how to do it, then replied he had done it but didn't say how:-( The KDE version has an option to turn it off, but Gnome doesn't seem to. Cheers, -- Ian gpg key: http://home.swiftdsl.com.au/~imoore/no-spam.asc

3 3