March 2007 - openSUSE Users - openSUSE Mailing Lists

[opensuse] MDADM - can't force build with 4 disks
by Steve Pritchard 01 Apr '07

01 Apr '07

Hello, I'm trying to build a 4 disk ATA raid with OpenSuse 10.2. In both the Yast module and CLI using mdadm I get the same error: invalid raid level: =raid5 My command line looks like this: mdadm --create --force /dev/md0 --chunk=64 -l=raid5 -n=4 /dev/hde /dev/hdf /dev/hdg /dev/hdh Both Yast and the CLI will allow the build using 3 disks and a spare...but --force SHOULD tell mdadm to use all disks for the array....and it does not seem to work. Any thoughts and ideas appreciated! cheers, Steve -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 3

[opensuse] VPN connection to Sonicwall
by David Brodbeck 01 Apr '07

01 Apr '07

Has anyone successfully set up a VPN connection from a mobile Linux system to a SonicWall firewall? Their Global VPN Client is Windows-only, as far as I can tell. I found this whitepaper: http://www.vpn-technology.com/Interoperability/SonicWALL VPN with Red Hat Linux.pdf But it assumes a static IP on each end, and the remote end of my connection is a laptop with a dynamic IP. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 10

[opensuse] time difference between system clock and OS clock
by dwain 01 Apr '07

01 Apr '07

Could some one explain why there is a 5 hour difference between my system clock and the clock in opensuse? Opensuse is running 5 hours behind. I have the time zone set to Central. I don't quite understand. I downloaded the time zone patch today when I reinstalled the os. I'm puzzled. Dwain -- Dwain Alford P.O. Box 145 Winfield, Alabama 35594 telephone: 205.487.2570 cellphone: 205.495.5619 "The artist may use any form which his expression demands; for his inner impulse must find suitable expression." Wassily Kandinsky, "Concerning The Spiritual In Art" -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

5 8

[opensuse] installing wireless
by James Schaefer 31 Mar '07

31 Mar '07

I have a Realtek RTL1885 54M Wireless LAN Network Adapter. I have found drivers for it, but I cant figure out how to install them. Can someone help me out in doing this? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Compaq Presario V3040TU headphone jack and speaker sensing problem.
by Tommy Lim KW 31 Mar '07

31 Mar '07

Hi, I got another problem on my laptop. My speaker and my headphone jack got no problem. Both got sound out. But the problem is when I plug in my headphone to headphone jack, my speakers still get sound. What happen actually? Sensing problem? Regards, Tommy -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 2

[opensuse] Memory Question?
by John Pierce 31 Mar '07

31 Mar '07

Hello list members, this is probably not the right place to ask, but maybe some guru can answer it for me. I just ordered a new ASUS M2NPV-VM motherboard, it supports 4 x 240-pin DIMM, support max. 8GB DDR2 800/667/533 ECC and non-ECC,un-buffered memory. Ok, here is my question. I am looking at purchasing memory for it and I see DDR2 667 PC2-5300 and DDR2 PC2-5400, both of the memory kits are dual channel 2 x 1GB sticks, what is the difference between PC2-5300 and PC2-5400, both are running at 667 Mhz? Thanks in advance. -- John Registered Linux User 263680, get counted at http://counter.li.org -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 3

[opensuse] Django
by M Harris 31 Mar '07

31 Mar '07

Which of you is using Django on openSUSE? -- Kind regards, M Harris <>< -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 2

Re: [opensuse] read only status on files copied from linux server to windows 2003
by Mike Noble 31 Mar '07

31 Mar '07

On Saturday 31 March 2007 11:06, Jack Malone wrote: > > So what you will find in moving the files back is that nothing will be > > as it > > was before. I guess I do not understand why it is going to take you a > > week to upgrade the server. I would suggest these steps: > > > > 1. Have all the new disks purchased and ready to go. > > 2. Backup all data, tape would be best, you should be doing this > > already. > > 3. Update the bios > > 4. Install the new disks > > 5. Restore the data > > > > Your done and should not have taken more then 24 hours. > > > > Another way is to have a second file server you can move all the data > > to. > > > > Do not go to Windows, you will hate yourself and life later!!!!!!!! > > > > Mike > > -- > > To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org > > For additional commands, e-mail: opensuse+help(a)opensuse.org > > Well for now the windows server is up an running, it has antivirus software > on it ( servers the windows workstations for that) an is running the access > control into the building also ( windows only software ). I was really > meaning a week at the most, I think it would have been less, But I have > other duties an things that comes up during the week an I was allowing time > for that an other things that come up in the weeks time. > I'm also waiting on 10.2 to get here. For now I am going to copy over the > data to another linux machine, which does not have the mirroring raid > system I have on the current linux server. On the backup I am doing that > already just not on tape. I'm backuping up to another harddrive into one > big compressed file on another machine ( disk to disk). This is a much > faster solution then tape backup at this time. > > > Do not go to Windows, you will hate yourself and life later!!!!!!!! > > I have scraped the plan before I got your email message an am going to > another linux machine. > Like I said I have to have a windows server for the antivirus software an > access control into the building ( it controls the locks an alarm system). > > > > > Jack The problem you will find is that the files copied to the Windows server will loose all permissions and ownership. For example lets say you have a user sally and here primary group is marketing. She has files all over the file server. When you copy those files to Windows you loose sally and marketing. Now to make it even worse lets say she has files like: rwxrw-r-- sally mrketing myfile when you pull it back from windows you will loose sally and marketing and you will have the permissions: rwxrwxrwx. I strongly suggest you re think the idea of using a Windows server. Depending on the amount of data, when I was saying 24 hours I was calculating on about 600GB of data. If you only have lets say 50GB of data you can do this in a single day. Remember while the data is restoring you can be doing other things. You need to plan for this down time or you will find yourself spending more time in trying to correct the problem that was caused by Windows. Mike -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] read only status on files copied from linux server to windows 2003
by Jack Malone 31 Mar '07

31 Mar '07

I need to redo my linux server an need to move the data files to a windows server for a week an run off of that server till I get my linux server rebuilt. Need to replace the hard drives an upgrade ram ect. When I copied some of the files from the linux server to windows 2003 all the files were read only an things did not run right when opening them from the network share on the workstations. Has anyone ran into this problem an know the fix for it. I have tried to marks the files on the windows server from read only to no read only and I still get the same problems. When you go to open files from the network share its says they are read only an they cannot be modified / changed. I need to run my server off of the windows server till I get the linux server back up and running again ( a week at the most if all goes as planned). Thanks Jack Malone -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 2

[opensuse] Can not enable DRI for ATI x1400 PCIe
by Valentin Sawadski 31 Mar '07

31 Mar '07

Hello everybody, I'll bet this is a frequent question but I've been trying to solve my problem for 5 hours now, without any luck. In short, I can not enable DRI for my ATI x1400 PCIe. The Xorg log shows only the following errors: (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" (**) fglrx(0): ATI GART size: 128 MB (EE) fglrx(0): [pcie] Failed to gather memory of size 131072Kb for PCIe. Error (-1000) [...] (EE) fglrx(0): GART is not initialized, disabling DRI (WW) fglrx(0): *********************************************** (WW) fglrx(0): * DRI initialization failed! * (WW) fglrx(0): * (maybe driver kernel module missing or bad) * (WW) fglrx(0): * 2D acceleraton available (MMIO) * (WW) fglrx(0): * no 3D acceleration available * (WW) fglrx(0): ********************************************* * I've found many people having this error but most of them could solve it by disabling composite, which I also did, but it seems that this is not the source of the error in my case. In adittion "lsmod | grep fglrx" shows that fglrx and agpgart is installed properly. Oh and I also tried setting "UseInternalAGPGART" to both, yes and no, but It always had the same effect. Does anyone have an idea what hinders ATI GART from gathering the memory it wants? Thanks in advance, Valentin S. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0