November 2007 - openSUSE Users - openSUSE Mailing Lists

[opensuse] evolution and iprint on openSUSE 10.0
by Roger Oberholtzer 16 Nov '07

16 Nov '07

I am trying to use iprint (novell-iprint-xclient-sl-1.0.20051215-2) on openSUSE 10.0. I have installed the iprint RPM, and it seems to look around my network. I have not yet added a printer via iprint. CUPS lists only my usual, fully functioning network printer. When I run evolution (evolution-2.4.0-3.4), if I press the PRINT button, evolution exits immediately. I see that it prints: evolution: symbol lookup error: /opt/gnome/lib/libgnomecups-1.0.so.1: undefined symbol: ippNewRequest So, I uninstalled iprint, thinking this was the cause. But the same error continues. Perhaps there is either a newer iprint I should be using? Or I need to remove some files by hand that did not get removed when I removed the iprint rpm? -- Roger Oberholtzer OPQ Systems / Ramböll RST Ramböll Sverige AB Kapellgränd 7 P.O. Box 4205 SE-102 65 Stockholm, Sweden Office: Int +46 8-615 60 20 Mobile: Int +46 70-815 1696 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 7

[opensuse] error when installing gimp's save for web plugins
by Hans Linux 16 Nov '07

16 Nov '07

I have GIMP 2.4 on my opensuse 10.3. I am trying to install save-for-web-plugins from source and i face this error : checking for GIMP... configure: error: Package requirements (gimp-2.0 >= 2.3.0 gimpui-2.0 >= 2.3.0) were not met: No package 'gimp-2.0' found No package 'gimpui-2.0' found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables GIMP_CFLAGS and GIMP_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. Next, i tried it with this command : ./configure GIMP_LIBS=/usr/bin/gimp GIMP_CFLAGS=/usr/bin/gcc no error were produced. But when i continue it with 'make', this is what i got : make[3]: Entering directory `/home/hans/Documents/download/gimp-save-for-web-0.27.0/src' if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. /usr/bin/gcc -I/usr/local/include -DLOCALEDIR=\""/usr/local/share/locale"\" -DDATADIR=\""/usr/local/share/gimp-save-for-web"\" -DGIMP_DISABLE_DEPRECATED -g -O2 -Wall -MT webx_main.o -MD -MP -MF ".deps/webx_main.Tpo" -c -o webx_main.o webx_main.c; \ then mv -f ".deps/webx_main.Tpo" ".deps/webx_main.Po"; else rm -f ".deps/webx_main.Tpo"; exit 1; fi webx_main.c:25:26: error: libgimp/gimp.h: No such file or directory webx_main.c:26:28: error: libgimp/gimpui.h: No such file or directory webx_main.c:27:35: error: gdk-pixbuf/gdk-pixbuf.h: No such file or directory In file included from webx_main.c:29: webx_main.h:28: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘global_image_ID’ webx_main.h:29: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘global_drawable_ID’ In file included from webx_main.c:30: webx_dialog.h:24:39: error: libgimpwidgets/gimpdialog.h: No such file or directory In file included from webx_main.c:30: webx_dialog.h:35: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘typedef’ webx_dialog.h:40: error: expected specifier-qualifier-list before ‘GimpDialog’ webx_dialog.h:75: error: expected specifier-qualifier-list before ‘GimpDialogClass’ webx_dialog.h:78: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘webx_dialog_get_type’ webx_dialog.h:80: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token webx_dialog.h:83: error: expected ‘)’ before ‘*’ token In file included from plugin-intl.h:34, from webx_main.c:32: /usr/include/libintl.h:40: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘extern’ webx_main.c:34: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘global_image_ID’ webx_main.c:35: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘global_drawable_ID’ webx_main.c:38: warning: type defaults to ‘int’ in declaration of ‘gchar’ webx_main.c:38: error: expected ‘;’, ‘,’ or ‘)’ before ‘*’ token webx_main.c:43: error: expected ‘)’ before ‘image_ID’ webx_main.c:46: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘PLUG_IN_INFO’ webx_main.c:57: warning: return type defaults to ‘int’ webx_main.c: In function ‘MAIN’: webx_main.c:59: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘{’ token webx_main.c:85: warning: type defaults to ‘int’ in declaration of ‘gchar’ webx_main.c:85: error: expected ‘;’, ‘,’ or ‘)’ before ‘*’ token webx_main.c:122: error: expected ‘)’ before ‘image_ID’ webx_main.c:140: error: expected ‘{’ at end of input make[3]: *** [webx_main.o] Error 1 make[3]: Leaving directory `/home/hans/Documents/download/gimp-save-for-web-0.27.0/src' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/home/hans/Documents/download/gimp-save-for-web-0.27.0/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/hans/Documents/download/gimp-save-for-web-0.27.0' make: *** [all] Error 2 Sorry, a little bit long :D So, what is wrong here? is the script trying to tell me that save-for-web-plugins not compatible with GIMP 2.4? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] Starting apps automatically in console session
by Stephan Hegel 16 Nov '07

16 Nov '07

Hi all, After logging in in KDE I would like to launch an application like "top" automatically in a dedicated session in the konsole window ? One konsole with a few sessions are already in place via "Save session", but how to start the apps automatically ? Thanks, Stephan. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 3

[opensuse] Compilation of Glibc 2.5
by Roland Turcan 16 Nov '07

16 Nov '07

Hello opensuse(a)opensuse.org! Could anybody help me with this problem? During 'make' og glibc2.5 from sources it reports: > mkdir /root/Desktop/glibc-build/signal > gcc ../sysdeps/unix/sysv/linux/signal.c -c -std=gnu99 -O2 -Wall -Winline -Wwrite-strings > -fmerge-all-constants -g -Wstrict-prototypes -mpreferred-stack-boundary=2 -I../include > -I/root/Desktop/glibc-build/signal -I/root/Desktop/glibc-build -I../sysdeps/i386/elf > -I../nptl/sysdeps/unix/sysv/linux/i386/i686 -I../nptl/sysdeps/unix/sysv/linux/i386 > -I../sysdeps/unix/sysv/linux/i386 -I../nptl/sysdeps/unix/sysv/linux -I../nptl/sysdeps/pthread > -I../sysdeps/pthread -I../sysdeps/unix/sysv/linux -I../sysdeps/gnu -I../sysdeps/unix/common > -I../sysdeps/unix/mman -I../sysdeps/unix/inet -I../sysdeps/unix/sysv/i386 -I../nptl/sysdeps/unix/sysv > -I../sysdeps/unix/sysv -I../sysdeps/unix/i386 -I../nptl/sysdeps/unix -I../sysdeps/unix -I../sysdeps/posix > -I../sysdeps/i386/i686/fpu -I../nptl/sysdeps/i386/i686 -I../sysdeps/i386/i686 -I../sysdeps/i386/i486 > -I../nptl/sysdeps/i386/i486 -I../sysdeps/i386/fpu -I../nptl/sysdeps/i386 -I../sysdeps/i386 > -I../sysdeps/wordsize-32 -I../sysdeps/ieee754/ldbl-96 -I../sysdeps/ieee754/dbl-64 -I../sysdeps/ieee754/flt-32 > -I../sysdeps/ieee754 -I../sysdeps/generic/elf -I../sysdeps/generic -I../nptl -I.. -I../libio -I. > -D_LIBC_REENTRANT -include ../include/libc-symbols.h -o /root/Desktop/glibc-build/signal/signal.o -MD > -MP -MF /root/Desktop/glibc-build/signal/signal.o.dt -MT /root/Desktop/glibc-build/signal/signal.o > gcc ../nptl/sysdeps/unix/sysv/linux/raise.c -c -std=gnu99 -O2 -Wall -Winline -Wwrite-strings > -fmerge-all-constants -g -Wstrict-prototypes -mpreferred-stack-boundary=2 -I../include > -I/root/Desktop/glibc-build/signal -I/root/Desktop/glibc-build -I../sysdeps/i386/elf > -I../nptl/sysdeps/unix/sysv/linux/i386/i686 -I../nptl/sysdeps/unix/sysv/linux/i386 > -I../sysdeps/unix/sysv/linux/i386 -I../nptl/sysdeps/unix/sysv/linux -I../nptl/sysdeps/pthread > -I../sysdeps/pthread -I../sysdeps/unix/sysv/linux -I../sysdeps/gnu -I../sysdeps/unix/common > -I../sysdeps/unix/mman -I../sysdeps/unix/inet -I../sysdeps/unix/sysv/i386 -I../nptl/sysdeps/unix/sysv > -I../sysdeps/unix/sysv -I../sysdeps/unix/i386 -I../nptl/sysdeps/unix -I../sysdeps/unix -I../sysdeps/posix > -I../sysdeps/i386/i686/fpu -I../nptl/sysdeps/i386/i686 -I../sysdeps/i386/i686 -I../sysdeps/i386/i486 > -I../nptl/sysdeps/i386/i486 -I../sysdeps/i386/fpu -I../nptl/sysdeps/i386 -I../sysdeps/i386 > -I../sysdeps/wordsize-32 -I../sysdeps/ieee754/ldbl-96 -I../sysdeps/ieee754/dbl-64 -I../sysdeps/ieee754/flt-32 > -I../sysdeps/ieee754 -I../sysdeps/generic/elf -I../sysdeps/generic -I../nptl -I.. -I../libio -I. > -D_LIBC_REENTRANT -include ../include/libc-symbols.h -o /root/Desktop/glibc-build/signal/raise.o -MD -MP > -MF /root/Desktop/glibc-build/signal/raise.o.dt -MT /root/Desktop/glibc-build/signal/raise.o > ../nptl/sysdeps/unix/sysv/linux/raise.c: In function `raise': > ../nptl/sysdeps/unix/sysv/linux/raise.c:42: error: `__NR_gettid' undeclared (first use in this function) > ../nptl/sysdeps/unix/sysv/linux/raise.c:42: error: (Each undeclared identifier is reported only once > ../nptl/sysdeps/unix/sysv/linux/raise.c:42: error: for each function it appears in.) > ../nptl/sysdeps/unix/sysv/linux/raise.c:71: error: `__NR_tkill' undeclared (first use in this function) > make[2]: *** [/root/Desktop/glibc-build/signal/raise.o] Error 1 > make[2]: Leaving directory `/root/Desktop/glibc-2.5/signal' > make[1]: *** [signal/subdir_lib] Error 2 > make[1]: Leaving directory `/root/Desktop/glibc-2.5' > make: *** [all] Error 2 I have all requirement softwares up-to-date and I use RedHat 7.3 i386 2.4.18-3. PS: Please do not answer me, that I should upgrade to newer distro, because I need this version of ancient linux to be able to work with software I need. Thanks. -- Best regards, TRoland http://www.rotursoft.sk http://exekutor.rotursoft.sk -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 2

[opensuse] Konquerer, how to disable F4 (open shell)
by Verner Kjærsgaard 16 Nov '07

16 Nov '07

Hi list, - in Konquerer, under the menu Tools you may hit F4 to open a terminal. - in our one-machine, multiuser setup, we wish to take away that feature. - how can we do that? - I know of Kiosktool and the possibility to forbid shells altogether, but this feature also voids us from running login scripts... - as always, thank you ! -- ------------------------------------------------------------------------- Med venlig hilsen/Best regards Verner Kjærsgaard Novell Certified Linux Professional 10035701 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 2

[opensuse] No hard disks were found - 10.3 install
by Mike Grau 16 Nov '07

16 Nov '07

Hello. I have a Dell Poweredge 2850 with a MegaRAID 518 PERC 4/DC Raid controller. Opensuse 10.2 installed on this machine without a hitch. However, when I try to install 10.3, I get to the point where the install process is analyzing the system and it reports, "Error no hard disks were found for the installation. Please check your hardware." The only thing unusual prior to this is when modules are being loaded, the "loading megaraid_mbox" takes forever (3 minutes or more), but finally does appear to load and no errors are displayed. I don't know if this takes so long because the disks weren't seen, or if the hard disk can't be found because of a problem with the megaraid driver. Pointers? I'm pretty much a newbie a troubleshooting this kind of thing. All my previous installs have pretty much been trouble free. Thanks! -- Mike -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

6 7

[opensuse] best docker for gnome opensuse 10.3
by Hans Linux 16 Nov '07

16 Nov '07

what's the best docker for gnome opensuse 10.3? i mean no much dependency needed, or even better install it using yast or one click install. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

Re: [opensuse] Re: [virtualbox] installation SOLVED (recommended to read)
by chika 16 Nov '07

16 Nov '07

sorry... for the name.... btw i have problem with seamless windows xp. i have uml-utilities installed, i've followed your instruction there. br0, tap0, eth0 set to none (aka no ip address). what should i do if on the guest i have xp then i wanna remote seamlessly from my susebox? n access samba server from the xp? can u give me the link reference? booming of virtualbox ... off course ... coz it is the better solution. br, tambun > On Nov 13, 2007 9:18 AM, chika <chika(a)cs.its.ac.id> wrote: >> thanks to Alexey Eremenko "Technologov" for opensuse for lizard >> esp on virtual box installation, >> >> i always fail in networking when i install from rpm / official package. >> then when try run installer for all distribution n follow the >> instruction >> on the user manual, the same, not work. >> >> to all users who wanna install the virtual box get the installater for >> all >> distro n follow the alexey book esp on installation section. >> > > I'm glad to hear that it helped to somebody ! Lately there is a boom > of VirtualBox popularity :) > > BTW: It's not openSUSE for lizard, but it's "Lessons for Lizards" (LfL). > > It can be installed into 10.3 as offline help - Use Yast Software > Manager, search and install "lessons4lizards" rpm. Then > Start->Help->Lessons for Lizards. > > Both VirtualBox and my guide are integrated into openSUSE 10.3 OS. > > Best wishes, > -- > -Alexey Eremenko "Technologov" > -- > To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org > For additional commands, e-mail: opensuse+help(a)opensuse.org > > -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] OT: Need program to replace text
by Chris Arnold 16 Nov '07

16 Nov '07

I have a bunch of html files that i need to do a couple of things to: 1.remove the html and head tags and replace them with other code 2.rename the file to .php Isn't there a program that will search all the files in a given directory for html and head and then replace that with something else? Then rename the files? I have seen the replace function in gedit but it does not accept the php code that needs to be inserted (i think the code is to long). Anyone no of a program/way that will accomplish this? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

13 23

[opensuse] Enabling firewall ports on the command line
by Bryen 16 Nov '07

16 Nov '07

As an example, let's use Apache... If I want to open the port on the firewall in Yast, I would simply go into httpd and check the open firewall option. How can I do this similarly on the command line without going into Yast? -- ---Bryen--- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 2