August 2006 - openSUSE Users - openSUSE Mailing Lists

SUSE9.3 - SUSE Plugger problem with USB Serial port cable
by Bruce Samhaber 05 Dec '06

05 Dec '06

Hi, I am using a USB to Serial port cable. Initially when I start the computer and linux then insert the USB Serial port cable the device is set as /dev/ttyUSB0. If the USB Serial Port cable is removed then reinserted it becomes /dev/ttyUSB1. Each time the USB Port cable is removed then reinserted the device name is increased by one. It appears to me that upon removeal of the device that SUSE Plugger is no removeing the device from the device list. Has anyone seen this problem? Does anyone have any suggestions to fix this? Thanks, -- Bruce Samhaber Senior Hardware Design Consultant Tel: 613-724-5987 112 Kenora St. Fax: 613-724-5987 Ottawa, Ontario Cel: 613-297-6961 K1Y 3L1 mailto: bsamhaber(a)sympatico.ca http://www3.sympatico.ca/marypat/

1 2

x server problem
by George Stoianov 28 Oct '06

28 Oct '06

Hello guys, I am having a bit of a problem getting a proper graphical session on an IBM desktop with an LCD monitor. Here is a line from the /etc/X11/xorg.conf file outlining the device Section "Device" BoardName "i845" BusID "0:2:0" Driver "i810" Identifier "Device[0]" VendorName "Intel" Option "DPMS" Option "May_Need_ForceBIOS" "1" EndSection Option "DPMS" Option "May_Need_ForceBIOS" "1" these lines were added from a Mandriva 2007 live cd that worked at low res and depth conf file to get it going, but it only works at 8 bit depth rate which is awful and barely readable. When I try to change it in Sax2 I get an error message telling me to look at a log file. Here is the information from the log: X Window System Version 6.8.2 Release Date: 9 February 2005 X Protocol Version 11, Revision 0, Release 6.8.2 Build Operating System: SuSE Linux [ELF] SuSE Current Operating System: Linux linux 2.6.13-15-default #1 Tue Sep 13 14:56:15 UTC 2005 i686 Build Date: 12 September 2005 Before reporting problems, check http://wiki.X.Org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.99.log", Time: Fri Aug 4 16:57:29 2006 (++) Using config file: "/var/lib/sax/xorg.conf" (==) ServerLayout "Layout[all]" (**) |-->Screen "Screen[0]" (0) (**) | |-->Monitor "Monitor[0]" (**) | |-->Device "Device[0]" (**) |-->Input Device "Keyboard[0]" (**) |-->Input Device "Mouse[1]" (WW) The directory "/usr/X11R6/lib/X11/fonts/100dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/Speedo" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/PEX" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/cyrillic" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/latin2/misc" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/latin2/75dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/latin2/100dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/latin2/Type1" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/latin7/75dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/baekmuk" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/japanese" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/kwintv" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/ucs/misc" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/ucs/75dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/ucs/100dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/hellas/misc" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/hellas/75dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/hellas/100dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/hellas/Type1" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/misc/sgi" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/xtest" does not exist. Entry deleted from font path. (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/local,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/URW,/usr/X11R6/lib/X11/fonts/truetype,/usr/X11R6/lib/X11/fonts/uni:unscaled,/usr/X11R6/lib/X11/fonts/CID,/opt/kde3/share/fonts" (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" (**) Input device list set to "/dev/ttyS0,/dev/ttyS1,/dev/ttyS2,/dev/ttyS3,/dev/ttyS4,/dev/ttyS5,/dev/ttyS6,/dev/ttyS7,/dev/ttyS8,/dev/psaux,/dev/logibm,/dev/sunmouse,/dev/atibm,/dev/amigamouse,/dev/atarimouse,/dev/inportbm,/dev/gpmdata,/dev/mouse,/dev/usbmouse,/dev/adbmouse,/dev/input/mice,/dev/input/event0,/dev/pointer0,/dev/pointer1,/dev/pointer2,/dev/pointer3" (==) ModulePath set to "/usr/X11R6/lib/modules" (**) Option "AllowMouseOpenFail" (**) Option "Xinerama" "off" (WW) Open APM failed (/dev/apm_bios) (No such file or directory) (II) Module ABI versions: X.Org ANSI C Emulation: 0.2 X.Org Video Driver: 0.7 X.Org XInput driver : 0.4 X.Org Server Extension : 0.2 X.Org Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 (++) using VT number 8 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,2560 card ffff,ffff rev 01 class 06,00,00 hdr 00 (II) PCI: 00:02:0: chip 8086,2562 card 1014,0267 rev 01 class 03,00,00 hdr 00 (II) PCI: 00:1d:0: chip 8086,24c2 card 1014,0267 rev 01 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,24c4 card 1014,0267 rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:1d:2: chip 8086,24c7 card 1014,0267 rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:1d:7: chip 8086,24cd card 1014,0267 rev 01 class 0c,03,20 hdr 00 (II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 81 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,24c0 card 0000,0000 rev 01 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,24cb card 1014,0267 rev 01 class 01,01,8a hdr 00 (II) PCI: 00:1f:3: chip 8086,24c3 card 1014,0267 rev 01 class 0c,05,00 hdr 00 (II) PCI: 00:1f:5: chip 8086,24c5 card 1014,0267 rev 01 class 04,01,00 hdr 00 (II) PCI: 02:08:0: chip 8086,1039 card 1014,0267 rev 81 class 02,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared) (II) Bus 2 I/O range: [0] -1 0 0x00002000 - 0x000020ff (0x100) IX[B] [1] -1 0 0x00002400 - 0x000024ff (0x100) IX[B] [2] -1 0 0x00002800 - 0x000028ff (0x100) IX[B] [3] -1 0 0x00002c00 - 0x00002cff (0x100) IX[B] (II) Bus 2 non-prefetchable memory range: [0] -1 0 0xc0100000 - 0xc01fffff (0x100000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(0:2:0) Intel Corp. 82845G/GL [Brookdale-G] Chipset Integrated Graphics Device rev 1, Mem @ 0x88000000/27, 0x80000000/19 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) PCI Memory resource overlap reduced 0xd0000000 from 0xdfffffff to 0xcfffffff (II) Active PCI resource ranges: [0] -1 0 0xc0100000 - 0xc0100fff (0x1000) MX[B] [1] -1 0 0xc0080800 - 0xc00808ff (0x100) MX[B] [2] -1 0 0xc0080c00 - 0xc0080dff (0x200) MX[B] [3] -1 0 0x80080000 - 0x800803ff (0x400) MX[B] [4] -1 0 0xc0080000 - 0xc00803ff (0x400) MX[B] [5] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O [6] -1 0 0x80000000 - 0x8007ffff (0x80000) MX[B](B) [7] -1 0 0x88000000 - 0x8fffffff (0x8000000) MX[B](B) [8] -1 0 0x00002000 - 0x0000203f (0x40) IX[B] [9] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B] [10] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B] [11] -1 0 0x00001880 - 0x0000189f (0x20) IX[B] [12] -1 0 0x00001860 - 0x0000186f (0x10) IX[B] [13] -1 0 0x00001840 - 0x0000185f (0x20) IX[B] [14] -1 0 0x00001820 - 0x0000183f (0x20) IX[B] [15] -1 0 0x00001800 - 0x0000181f (0x20) IX[B] (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xc0100000 - 0xc0100fff (0x1000) MX[B] [1] -1 0 0xc0080800 - 0xc00808ff (0x100) MX[B] [2] -1 0 0xc0080c00 - 0xc0080dff (0x200) MX[B] [3] -1 0 0x80080000 - 0x800803ff (0x400) MX[B] [4] -1 0 0xc0080000 - 0xc00803ff (0x400) MX[B] [5] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O [6] -1 0 0x80000000 - 0x8007ffff (0x80000) MX[B](B) [7] -1 0 0x88000000 - 0x8fffffff (0x8000000) MX[B](B) [8] -1 0 0x00002000 - 0x0000203f (0x40) IX[B] [9] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B] [10] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B] [11] -1 0 0x00001880 - 0x0000189f (0x20) IX[B] [12] -1 0 0x00001860 - 0x0000186f (0x10) IX[B] [13] -1 0 0x00001840 - 0x0000185f (0x20) IX[B] [14] -1 0 0x00001820 - 0x0000183f (0x20) IX[B] [15] -1 0 0x00001800 - 0x0000181f (0x20) IX[B] (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xc0100000 - 0xc0100fff (0x1000) MX[B] [6] -1 0 0xc0080800 - 0xc00808ff (0x100) MX[B] [7] -1 0 0xc0080c00 - 0xc0080dff (0x200) MX[B] [8] -1 0 0x80080000 - 0x800803ff (0x400) MX[B] [9] -1 0 0xc0080000 - 0xc00803ff (0x400) MX[B] [10] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O [11] -1 0 0x80000000 - 0x8007ffff (0x80000) MX[B](B) [12] -1 0 0x88000000 - 0x8fffffff (0x8000000) MX[B](B) [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [15] -1 0 0x00002000 - 0x0000203f (0x40) IX[B] [16] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B] [17] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B] [18] -1 0 0x00001880 - 0x0000189f (0x20) IX[B] [19] -1 0 0x00001860 - 0x0000186f (0x10) IX[B] [20] -1 0 0x00001840 - 0x0000185f (0x20) IX[B] [21] -1 0 0x00001820 - 0x0000183f (0x20) IX[B] [22] -1 0 0x00001800 - 0x0000181f (0x20) IX[B] (II) LoadModule: "glx" (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a (II) Module glx: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading sub module "GLcore" (II) LoadModule: "GLcore" (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o": object file contains no symbols (II) Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o": object file contains no symbols (II) Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o": object file contains no symbols (II) Module GLcore: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading extension GLX (II) LoadModule: "type1" (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.2 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "freetype" (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 6.8.2, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font FreeType (II) LoadModule: "v4l" (II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o (II) Module v4l: vendor="X.Org Foundation" compiled for 6.8.2, module version = 0.0.1 ABI class: X.Org Video Driver, version 0.7 (II) LoadModule: "i810" (II) Loading /usr/X11R6/lib/modules/drivers/i810_drv.o (II) Module i810: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.4.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 0.7 (II) LoadModule: "kbd" (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o (II) Module kbd: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.4 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.4 (II) v4l driver for Video4Linux (II) I810: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G (II) Primary Device is: PCI 00:02:0 (--) Chipset 845G found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xc0100000 - 0xc0100fff (0x1000) MX[B] [6] -1 0 0xc0080800 - 0xc00808ff (0x100) MX[B] [7] -1 0 0xc0080c00 - 0xc0080dff (0x200) MX[B] [8] -1 0 0x80080000 - 0x800803ff (0x400) MX[B] [9] -1 0 0xc0080000 - 0xc00803ff (0x400) MX[B] [10] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O [11] -1 0 0x80000000 - 0x8007ffff (0x80000) MX[B](B) [12] -1 0 0x88000000 - 0x8fffffff (0x8000000) MX[B](B) [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [15] -1 0 0x00002000 - 0x0000203f (0x40) IX[B] [16] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B] [17] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B] [18] -1 0 0x00001880 - 0x0000189f (0x20) IX[B] [19] -1 0 0x00001860 - 0x0000186f (0x10) IX[B] [20] -1 0 0x00001840 - 0x0000185f (0x20) IX[B] [21] -1 0 0x00001820 - 0x0000183f (0x20) IX[B] [22] -1 0 0x00001800 - 0x0000181f (0x20) IX[B] (II) resource ranges after probing: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xc0100000 - 0xc0100fff (0x1000) MX[B] [6] -1 0 0xc0080800 - 0xc00808ff (0x100) MX[B] [7] -1 0 0xc0080c00 - 0xc0080dff (0x200) MX[B] [8] -1 0 0x80080000 - 0x800803ff (0x400) MX[B] [9] -1 0 0xc0080000 - 0xc00803ff (0x400) MX[B] [10] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O [11] -1 0 0x80000000 - 0x8007ffff (0x80000) MX[B](B) [12] -1 0 0x88000000 - 0x8fffffff (0x8000000) MX[B](B) [13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [18] -1 0 0x00002000 - 0x0000203f (0x40) IX[B] [19] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B] [20] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B] [21] -1 0 0x00001880 - 0x0000189f (0x20) IX[B] [22] -1 0 0x00001860 - 0x0000186f (0x10) IX[B] [23] -1 0 0x00001840 - 0x0000185f (0x20) IX[B] [24] -1 0 0x00001820 - 0x0000183f (0x20) IX[B] [25] -1 0 0x00001800 - 0x0000181f (0x20) IX[B] [26] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [27] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.1.0 ABI class: X.Org Video Driver, version 0.7 (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="X.Org Foundation" compiled for 6.8.2, module version = 0.1.0 ABI class: X.Org Video Driver, version 0.7 (**) I810(0): Depth 24, (--) framebuffer bpp 32 (==) I810(0): RGB weight 888 (==) I810(0): Default visual is TrueColor (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a (II) I810(0): initializing int10 (II) I810(0): Primary V_BIOS segment is: 0xc000 (II) I810(0): VESA BIOS detected (II) I810(0): VESA VBE Version 3.0 (II) I810(0): VESA VBE Total Mem: 832 kB (II) I810(0): VESA VBE OEM: Intel(r)845G/845GL/845GE/845GV Graphics Chip Accelerated VGA BIOS (II) I810(0): VESA VBE OEM Software Rev: 1.0 (II) I810(0): VESA VBE OEM Vendor: Intel Corporation (II) I810(0): VESA VBE OEM Product: Intel(r)845G/845GL/845GE/845GV Graphics Controller (II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0 (II) I810(0): Integrated Graphics Chipset: Intel(R) 845G (--) I810(0): Chipset: "845G" (--) I810(0): Linear framebuffer at 0x88000000 (--) I810(0): IO registers at addr 0x80000000 (II) I810(0): 1 display pipe available. (II) I810(0): detected 892 kB stolen memory. (II) I810(0): I830CheckAvailableMemory: 1962656 kB available (II) I810(0): Will attempt to tell the BIOS that there is 12288 kB VideoRAM (WW) I810(0): Extended BIOS function 0x5f11 not supported. (II) I810(0): Before: SWF1 is 0x00001800 (II) I810(0): After: SWF1 is 0x00001808 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a (II) I810(0): initializing int10 (II) I810(0): Primary V_BIOS segment is: 0xc000 (II) I810(0): VESA BIOS detected (II) I810(0): VESA VBE Version 3.0 (II) I810(0): VESA VBE Total Mem: 832 kB (II) I810(0): VESA VBE OEM: Intel(r)845G/845GL/845GE/845GV Graphics Chip Accelerated VGA BIOS (II) I810(0): VESA VBE OEM Software Rev: 1.0 (II) I810(0): VESA VBE OEM Vendor: Intel Corporation (II) I810(0): VESA VBE OEM Product: Intel(r)845G/845GL/845GE/845GV Graphics Controller (II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0 (II) I810(0): BIOS now sees 832 kB VideoRAM (--) I810(0): Pre-allocated VideoRAM: 892 kByte (==) I810(0): VideoRAM: 65536 kByte (==) I810(0): video overlay key set to 0x101fe (**) I810(0): page flipping disabled (==) I810(0): Using gamma correction (1.0, 1.0, 1.0) (II) I810(0): BIOS Build: 2975 (==) I810(0): Device Presence: disabled. (==) I810(0): Display Info: enabled. (II) I810(0): Broken BIOSes cause the system to hang here. If you encounter this problem please add Option "DisplayInfo" "FALSE" to the Device section of your XF86Config file. (II) I810(0): Display Info: CRT: attached: FALSE, present: FALSE, size: (0,0) (II) I810(0): Display Info: TV: attached: FALSE, present: FALSE, size: (0,0) (II) I810(0): Display Info: DFP (digital flat panel): attached: FALSE, present: FALSE, size: (0,0) (II) I810(0): Display Info: LFP (local flat panel): attached: FALSE, present: FALSE, size: (0,0) (II) I810(0): Display Info: CRT2 (second CRT): attached: FALSE, present: FALSE, size: (0,0) (II) I810(0): Display Info: TV2 (second TV): attached: FALSE, present: FALSE, size: (0,0) (II) I810(0): Currently active displays on Pipe A: (II) I810(0): CRT (==) I810(0): Display is using Pipe A (--) I810(0): Maximum frambuffer space: 65368 kByte (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 (II) I810(0): VESA VBE DDC supported (II) I810(0): VESA VBE DDC Level 2 (II) I810(0): VESA VBE DDC transfer in appr. 1 sec. (II) I810(0): VESA VBE DDC read successfully (II) I810(0): Will use BIOS call 0x5f05 to set refresh rates for CRTs. (--) I810(0): Maximum space available for video modes: 832 kByte (II) I810(0): Using detected DDC timings (II) I810(0): HorizSync 30-81 (II) I810(0): VertRefresh 56-76 (WW) I810(0): config file hsync range 28-70kHz not within DDC hsync range 30-81kHz (WW) I810(0): config file vrefresh range 50-160Hz not within DDC vrefresh range 56-76Hz LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 MaxPixelClock: 0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 MaxPixelClock: 0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 MaxPixelClock: 0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 MaxPixelClock: 0 LinBytesPerScanLine: 640 BnkNumberOfImagePages: 1 LinNumberOfImagePages: 1 MaxPixelClock: 230000000 LinBytesPerScanLine: 800 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 MaxPixelClock: 230000000 LinBytesPerScanLine: 1024 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 MaxPixelClock: 230000000 LinBytesPerScanLine: 1280 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 MaxPixelClock: 230000000 LinBytesPerScanLine: 1600 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 MaxPixelClock: 230000000 LinBytesPerScanLine: 1920 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 MaxPixelClock: 230000000 LinBytesPerScanLine: 1280 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 MaxPixelClock: 230000000 LinBytesPerScanLine: 1600 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 MaxPixelClock: 230000000 LinBytesPerScanLine: 2048 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 MaxPixelClock: 230000000 LinBytesPerScanLine: 2560 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 MaxPixelClock: 230000000 LinBytesPerScanLine: 3200 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 MaxPixelClock: 230000000 LinBytesPerScanLine: 3840 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 MaxPixelClock: 230000000 LinBytesPerScanLine: 2560 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 MaxPixelClock: 230000000 LinBytesPerScanLine: 3200 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 MaxPixelClock: 230000000 LinBytesPerScanLine: 4096 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 MaxPixelClock: 230000000 LinBytesPerScanLine: 5120 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 MaxPixelClock: 230000000 LinBytesPerScanLine: 6400 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 MaxPixelClock: 230000000 LinBytesPerScanLine: 7680 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 MaxPixelClock: 230000000 (EE) I810(0): No Video BIOS modes for chosen depth. (II) UnloadModule: "i810" (II) UnloadModule: "ddc" (II) Unloading /usr/X11R6/lib/modules/libddc.a (II) UnloadModule: "int10" (II) UnloadModule: "int10" (II) UnloadModule: "vgahw" (II) Unloading /usr/X11R6/lib/modules/libvgahw.a (II) UnloadModule: "vbe" (II) Unloading /usr/X11R6/lib/modules/libvbe.a (II) UnloadModule: "int10" (II) Unloading /usr/X11R6/lib/modules/linux/libint10.a (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found Please consult the The X.Org Foundation support at http://wiki.X.Org for help. Please also check the log file at "/var/log/Xorg.99.log" for additional information. Thank you for your help. George

4 5

[SLE] Suse 10 Root nearly full
by Carl William Spitzer IV 11 Oct '06

11 Oct '06

Why is root full?? All I have done is periodic online updates when I installed only about 7gig was taken up. linux:/home/cwsiv # df -h Filesystem Size Used Avail Use% Mounted on /dev/hda5 14G 12G 1.5G 90% / tmpfs 220M 12K 220M 1% /dev/shm /dev/hda3 25G 24G 1.9G 93% /Storage0 /dev/hda4 20G 15G 4.9G 75% /Storage1 /dev/hda1 61M 11M 48M 18% /boot /dev/hda7 16G 15G 920M 95% /home linux:/home/cwsiv # ls / . boot home media proc srv subdomain usr .. dev lib mnt root Storage0 sys var bin etc lost+found opt sbin Storage1 tmp Win32 linux:/home/cwsiv # du -sh /boot 6.3M /boot linux:/home/cwsiv # du -sh /proc/ 450M /proc/ linux:/home/cwsiv # du -sh /srv 1.4M /srv linux:/home/cwsiv # du -sh /subdomain/ 4.0K /subdomain/ linux:/home/cwsiv # du -sh /usr 3.3G /usr linux:/home/cwsiv # du -sh /dev 152K /dev linux:/home/cwsiv # du -sh /lib 92M /lib linux:/home/cwsiv # du -sh /mnt 4.0K /mnt linux:/home/cwsiv # du -sh /root 3.6M /root linux:/home/cwsiv # du -sh /sys 0 /sys linux:/home/cwsiv # du -sh /var 607M /var linux:/home/cwsiv # du -sh /bin 6.5M /bin linux:/home/cwsiv # du -sh /etc 66M /etc linux:/home/cwsiv # du -sh /lost+found/ 16K /lost+found/ linux:/home/cwsiv # du -sh /opt/ 2.1G /opt/ linux:/home/cwsiv # du -sh /sbin/ 11M /sbin/ linux:/home/cwsiv # du -sh /tmp/ 1.4G /tmp/ linux:/home/cwsiv # du -sh /Win32/ 4.2G /Win32/ linux:/home/cwsiv # -- ___ _ _ _ ____ _ _ _ | | | | [__ | | | |___ |_|_| ___] | \/ -- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq(a)suse.com

12 23

Want to add a Bluetooth Modem
by Puneit Singh 07 Oct '06

07 Oct '06

Hello I have a bluetooth enabled nokia phone which can be used to connect to internet by using Bluetooth Dial up networking service. In order to do that, I should be able to add the Nokia bluetooth modem in SUSE 10.1 (Using KDE) How do I do it ___ Thanks and regards Puneit Singh

5 7

[opensuse] missing ksyms form my kernel
by Rene Salmon 05 Oct '06

05 Oct '06

Hi, I downloaded and compiled a 2.6.16 vanilla kernel from kernel.org for my suse 10.1 box. Now I am trying to compile and install some drivers/modules for this kernel. Everything goes well and the drivers/modules get generated and produce some RPMS for me to install. The problem I run into is that when I try to install the RPM packages I get a missing rpm dependency. error: Failed dependencies: ksym(schedule) = 1000e51 is needed by There is a suse kernel-syms rpm which will probably solve this if I where using the suse kernel. But I am using a vanilla kernel from kernel.org. Any clues on how to generate a kernel and kernel-syms rpm on my suse box from a vanilla source kernel? Thanks Rene -- - -- Rene Salmon Tulane University Center for Computational Science http://www.ccs.tulane.edu rsalmon(a)tulane.edu Tel 504-862-8393 Tel 504-988-8552 Fax 504-862-8392 -- - -- Rene Salmon Tulane University Center for Computational Science http://www.ccs.tulane.edu rsalmon(a)tulane.edu Tel 504-862-8393 Tel 504-988-8552 Fax 504-862-8392 --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 5

10.1 RC1 to final by updating RPMs?
by Thomas Börkel 02 Oct '06

02 Oct '06

HI! Is it already known, if I will be able to update a 10.1 RC1 installation to 10.1 final (when available) by simply updating all changed RPMs? Thanks! Thomas

11 20

firefox starts 2 times after upgrade
by Cor van Haastregt 26 Sep '06

26 Sep '06

Hi all, I am using SuSE 9.3. Today i updated firefox from 1.0.8 to 1.5.0.6-1.4 (using YaST) After the update, as soon as i click the shortcut on my desktop firefox starts 2 times. The first is very quick available, but you can see that it tries to load a second time, which fails. I can use firefox normally after this. When i start firefox from the "start" button and then the internet -> web browser function, it starts normal. When i make a new shortcut to firefox, and click it, again it tries to open it 2 times. When i look in the properties of the desktop shortcut (which is the standard icon/setup), firefox is started with the command firefox %u The firefox shortcut from the "start" menu starts with the same command. The first time i started firefox after the update (using the desktop shortcut) it started normal. All further attempts try to start it twice. This happens for all users, and on two different computers. What went wrong and how do i correct this? Grtz, Cor van Haastregt -- Disc lamer: The mailinglist that you are reading is not the intended recipient of this posting. This is only a test of the echelon and data retention systems. Please archive this message indefinately to allow verification of the logfiles. By reading this message you agree to have your privacy invaded

9 20

dvdrip problems
by wmeler 17 Sep '06

17 Sep '06

I downloaded the dvdrip RPM package from http://packman.links2linux.org/index.php4?action=175&vn=2 for SuSE 10.1 and it installed just fine. When I try to run dvdrip from the command line I get the following: Can't locate Locale/TextDomain.pm in @INC (@INC contains: lib /usr/lib/perl5/5.8.8/i586-linux-thread-multi /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i586-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i586-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl .) at /usr/bin/dvdrip line 21. BEGIN failed--compilation aborted at /usr/bin/dvdrip line 21. In other words, it's not finding "Locale::TextDomain" in the dvdrip script. (Running through the SuSE "start" menu doesn't do anything except fail out too.) Ideas as to how to get it to see the right files? Thanks! wmeler

5 4

close login of user
by James D. Parra 17 Sep '06

17 Sep '06

Hello, Short of rebooting, how to close an open session of a user who is logged in? Thank you, James

15 21

IRQ problems?
by Mike Adolf 12 Sep '06

12 Sep '06

SUSE 10.1 doesn't see my internal modem (best data ISA, hardware based controller) and when I try to configure my sounds cards ( cs4236B and cs4610/11 accelerator) and error occurs with a message indicating it could be due to a IRQ error. How does one even begin to address possible IRQ problems/conflicts ?? Mike

5 4