December 2006 - openSUSE Users - openSUSE Mailing Lists

[opensuse] force eth0 to a different interrupt...
by Cameron Seader 28 Dec '06

28 Dec '06

here is my interrupts... cat /proc/interrupts CPU0 0: 588839 IO- APIC- edge timer 1: 2728 IO- APIC- edge i8042 8: 0 IO- APIC- edge rtc 9: 0 IO- APIC- level acpi 12: 158646 IO- APIC- edge i8042 14: 6189 IO- APIC- edge ide0 15: 7047 IO- APIC- edge ide1 177: 65473 IO- APIC- level libata 185: 129012 IO- APIC- level ehci_hcd:usb1, ohci_hcd:usb3 193: 26315 IO- APIC- level NVidia nForce3 201: 0 IO- APIC- level ohci_hcd:usb2 209: 177862 IO- APIC- level eth0, nvidia 217: 17 IO- APIC- level ohci1394, bttv0 NMI: 425 LOC: 588787 ERR: 0 MIS: 0 notice interrupt 209 has eth0 and nvidia. I don't want those shared. Does anyone know how to force eth0 to another interrupt? TIA, - Cameron -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

Re: [opensuse] 10.2 will not install
by Aaron Bridge 28 Dec '06

28 Dec '06

Cristian Rodriguez R. wrote: > Aaron Bridge escribió: > >> I have tried downloading using http, ftp, bittorrent, and get right. >> The downloads complete, but the install hangs. After the kernel loads >> the last thing that is printed to the screen is: NET: Registered >> protocol family 2 >> Then the curser just blinks under that. >> >> I even made a boot.iso disk, which had the correct checksum, and still >> had the problem. >> I am using a PIII with 512mb RAM. Downloading the i386 files. >> > > try to install in "safe mode" > > > Same thing happened trying to install using Safe Settings. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Machine booting to grub prompt
by Doctor Who 28 Dec '06

28 Dec '06

I did some updates on my openSUSE box (includiing kernel) and now when i rebooted, I'm brought to the grub> prompt. How can I troubleshoot to fix? I realize I should know this, but drawing a blank. Thanks. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

RE: [opensuse] 1394 -firewire device detection
by James D. Parra 28 Dec '06

28 Dec '06

> > Hello, > > I am trying to detect a hard drive connected via firewire, but I don't see > the Maxtor OneTouch drive. What can I do to locate it? > > Thanks in advance, > > ~~~~ > > Let me one more detail; I am running Suse 10.0. > > Thanks again, > I'm pretty sure I've used firewire with 10.0. When you plug it in does anything show up in dmesg? ie. dmesg | tail -50 should provide diagnostic info related to plugging in the drive. It should also tell which drive name is assigned. ie /dev/sda etc. Then you can check if it was automounted by just typing mount, but if not: fdisk -l /dev/sd? should give you a list of partitions. mount /dev/sd?1 /mnt etc should allow you to manually mount it. Once you have all of that working you can come back and look at your automount logic. (I don't know much about that. I typically prefer manual mounts so I have full control.) ~~~~ Thanks Greg, All I see is the following; ieee1394: Error parsing configrom for node 0-00:1023 ieee1394: Node suspended: ID:BUS[0-00:1023] GUID[0010b92100a33b9a] ieee1394: Node resumed: ID:BUS[0-00:1023] GUID[0010b92100a33b9a] Any suggestions? Thanks, ~James -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] Kernel oops when installing openSUSE 10.2
by Rainer Klute 28 Dec '06

28 Dec '06

I experienced a kernel oops when trying to install openSUSE 10.2 in a VMware virtual machine hosted by an IBM Netfinity 5500 M10 8661 51Y running under Suse Linux 9.3. A screenshot of the oops is available at <http://www.rainer-klute.de/~klute/Misc/netfinity_oops.html>. On the same box openSUSE 10.1 installed successfully in a VMware virtual machine. It executes Suse Linux 9.3 as the host operating system. The kernel oopses on each of the installation variants, i.e. * Installation * Installation--ACPI Disabled * Installation--Local APIC Disabled * Installation--Save Settings * Rescue System The screenshot is visible when installing in text mode only. In the graphics mode the installation just hangs. To reproduce the oops just start the installation: The kernel loads, starts to execute, and then... oops! I didn't try to install openSUSE 10.2 on the bare machine yet, i.e. without VMware. But since openSUSE 10.1 runs smoothly in a VM this shouldn't be an issue. Best regards Rainer Klute Rainer Klute IT-Consulting GmbH Dipl.-Inform. Rainer Klute E-Mail: klute(a)rainer-klute.de Körner Grund 24 Telefon: +49 172 2324824 D-44143 Dortmund Telefax: +49 231 5349423 OpenPGP fingerprint: E4E4386515EE0BED5C162FBB5343461584B5A42E -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] No reboot option
by James Knott 28 Dec '06

28 Dec '06

I have SUSE 10.2 installed on a ThinkPad that also has XP installed. With previous versions of SUSE, when I selected restart, there was an option to hold the mouse on the restart button and a drop down menu appeared, which allowed me to select XP. This feature has apparently disappeared. Is there any way to get it back? tnx jk -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 11

RE: [opensuse] 1394 -firewire device detection
by James D. Parra 28 Dec '06

28 Dec '06

Hello, I am trying to detect a hard drive connected via firewire, but I don't see the Maxtor OneTouch drive. What can I do to locate it? Thanks in advance, ~~~~ Let me one more detail; I am running Suse 10.0. Thanks again, ~James -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] 1394 -firewire device detection
by James D. Parra 28 Dec '06

28 Dec '06

Hello, I am trying to detect a hard drive connected via firewire, but I don't see the Maxtor OneTouch drive. What can I do to locate it? Thanks in advance, James -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] SUSE CRASH, Stuff doesn't work now.
by Jay Smith 28 Dec '06

28 Dec '06

So my OpenSuse 10.2 crashed on me. I had amaroK,GTK-Gnutella, GAIM, and Firefox open. My computer froze (this is new to me) and I had to hard reboot it. When it started, two things didn't work (that I know of). 1) KPowerSave won't start. This is my error message: System configuration startup check disabled. (no debugging symbols found) Using host libthread_db library "/lib/libthread_db.so.1". (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) [Thread debugging using libthread_db enabled] [New Thread -1231595008 (LWP 4598)] (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) [KCrash handler] #9 0xb670a159 in libhal_device_property_exists () from /usr/lib/libhal.so.1 #10 0xb67465a0 in dbusHAL::halGetPropertyString () from /opt/kde3/lib/libkdeinit_kpowersave.so #11 0xb67524dc in HardwareInfo::checkPowermanagement () from /opt/kde3/lib/libkdeinit_kpowersave.so #12 0xb6755d90 in HardwareInfo::HardwareInfo () from /opt/kde3/lib/libkdeinit_kpowersave.so #13 0xb676795f in kpowersave::kpowersave () from /opt/kde3/lib/libkdeinit_kpowersave.so #14 0xb676ac9b in kdemain () from /opt/kde3/lib/libkdeinit_kpowersave.so #15 0xb7ef4764 in kdeinitmain () from /opt/kde3/lib/kde3/kpowersave.so #16 0x0804e33f in QGList::~QGList () #17 0x00000001 in ?? () #18 0x0807c068 in ?? () #19 0x00000001 in ?? () #20 0x00000000 in ?? () You get the idea. 2) YaST Software Management doesn't recognize my OpenSUSe 10.2 CD as a source anymore. It won't let me go to other sources either until I click Skip about 15 times. Any ideas of what's wrong? Also, what can cause OpenSuSe 10.2 to freeze? What can I do to prevent it from freezing/crashing? If a freeze does happen, what steps should I take to prevent errors. If errors happen, what can I do to recover? Thanks all. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 3

[opensuse] Setting up NFS with Suse 10.2
by Scott Gilmore 28 Dec '06

28 Dec '06

> OTOH, you could offer an alternative solution to NFS. > > Cheers, Dave Anyone have a response to this? I suppose you could use sshfs, samba . . . What else I am forgetting? -Scott -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0