June 2005 - openSUSE Users - openSUSE Mailing Lists

Bad blocks on a ReiserFS volume. How to retrieve files?
by Silviu Marin-Caea 14 Aug '24

14 Aug '24

I have a large hard-disk (120 GB) on which some blocks went bad. Now, it cannot be mounted. Attached is what debugreiserfs says. What can I do; I'm newbie to reiserfs architecture. I thought that ReiserFS keeps copies of the superblock or something, like ext2/3 does. reiserfsck says "error occured looks like hardware problem. bread cannot read block 13271040". That's the actual number it displays. PS I have asked the same question on the reiserfs-list, but it's extremely low traffic. Maybe someone here knows more. Thank you Filesystem state: consistency is not checked after last mounting Reiserfs super block in block 16 on 0x1642 of format 3.6 with standard journal Count of blocks on the device: 29945160 Number of bitmaps: 914 Blocksize: 4096 Free blocks (count of blocks - used [journal, bitmaps, data, reserved] blocks): 29154954 Root block: 14969 Filesystem is NOT clean Tree height: 4 Hash function used to sort names: "r5" Objectid map size 10, max 972 Journal parameters: Device [0x0] Magic [0x34ae2c74] Size 8193 blocks (including 1 for journal header) (first block 18) Max transaction length 1024 blocks Max batch size 900 blocks Max commit age 30 Blocks reserved by journal: 0 Fs state field: 0x0 sb_version: 2 inode generation number: 35482 UUID: 48d29ced-fe37-4c68-adf8-32ace9f2be45 LABEL: Set flags in SB: ATTRIBUTES CLEAN

3 4

Sorry SuSE: 9.1 is Waste of time and money!
by Terje J. Hanssen 17 May '24

17 May '24

I am sorry to conclude that my upgrade from SuSE 9.0 Pro to 9.1 Pro has been waste of time and money for me, so far. The same I have to say about the free SuSE "Installation support". The reason is that my SuSE 9.1 installation only detects 1 of my 3 SCSCI devices (as I wrote in another subject on this forum: http://lists.suse.com/archive/suse-linux-e/2004-May/3254.html) Yamaha 4416S CDRW recorder detected HP DVD Writer 100i NOT detected Epson 1640SU scanner NOT detected It's rather stupid. I have installed 9.1 using the DVD disk just in the HP DVD drive, but after the installation of 9.1, the KDE/Konqueror /media/recorder cannot access it and YaST2 cannot install additional software from it. Only one "Cdrecorder" is found in My computer and that is the Yamaha 4416 drive, which the KDE/Konqueror file manager assign as /media/recorder11. I am sure 9.1 is the reason, as I hadn't this problems with 9.0. I have tried both an update and two several new installation of 9.1. Neither SJDS nor Windows on the same multiboot PC have problems to detect these devices. In my opinion SuSE should therefore debug 9.1 better and longer, and not leave the problems to the customers. I see SuSE notes on their web saying that they know SCSI scanners are not detected in 9.1. But regarding my HP DVD writer problem, the SuSE support (as usual) don't take the responsibility and argue that this problem (a combination of IDE disk and SCSI devices) isn't included in their free installation support! This sounds remarkable, and I have never had a modern PC of so simple model or configuration that it has fitted the limited rules for the free installation support. Terje J. Hanssen

17 29

[SLE] RealPlayer G2 on SuSe 6.2
by yh＠ottawa.com 03 Apr '24

03 Apr '24

Yesterday, I finally got sound going on my Linux setup. I downloaded RealPlayer G2 and it worked beautifully. Today, RealPlayer run but no sound coming out. All other sound functions still work. I can still play my CD, have system sound BUT no sound when I run RealPlayer. /var/log/message said kernel: Sound: DMA (output) timed out - IRQ/DRQ config error? but KDE sound still work. I have re-installed RealPlayer 3 times now, still no sound when I run the RealPlayer. Any help is appreciated. Ying yh(a)ottawa.com -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

3 2

Creating a new user for a deamon
by Rowan Reid 15 Jan '24

15 Jan '24

I'm setting up a cron job for a analysis tool, I'm trying to use the SuSE tools where possible but YAST doent' allow you to create new user without a home I tried /dev/null is there a proper way to do this ? Rowan Reid Job Captain, Systems Administrator STUDIO 3 ARCHITECTS 909 982 1717

3 2

Web Site Standards
by Bryan Tyson 25 Sep '21

25 Sep '21

On Wednesday 03 July 2002 03:38, Michael wrote: > I tried to visit this site. > http://www.bet365.com > The result upset me so much i sent them this. I sent the letter below, and I encourage everyone on the list to send a similar letter. ----------------------------------------- Subject: Create a Real Web Site Please From: Bryan S. Tyson <bryantyson(a)earthlink.net> To: webmaster(a)bet365.com When attempting to view your site using Konqueror 2.2.1 and Mozilla 0.9.4, both Linux web browsers, I was curtly informed that my browser is "incompatible." Your site, sir, is what is "incompatible." Stick with established standards and real html, not Microsoft proprietary "features." *************************************************** Powered by SuSE Linux 7.3 Professional KDE 2.2.1 KMail 1.3.1 This is a Microsoft-free computer Bryan S. Tyson bryantyson(a)earthlink.net ***************************************************

10 9

Mount Windows NT(NTFS) drive as drive Z: for all users
by Keith Jacobs 25 Sep '21

25 Sep '21

We have an winNT server and need to auto mount a shared folder as if it were a windose mapped drive Z: on SuSE8 Could someone please explain how to do this and how to make sure it is set-up for every user everytime the system is booted. Thanks Regards Keith Jacobs New to Linux

3 2

Adding fonts?
by Tracer Bullet 22 Aug '16

22 Aug '16

Hi all, Reading some mails on the GIMP mail list, I ran across the procedure to install some more fonts for not only Gimp, but the system and StarOffice to use also. Well, I installed the fonts, went to the shell and issued the command xset fp+ <font directory> and then the rehash command and all fonts are there! Ok, that went well, but each time I restart the system, I have to do it all over again? Is there a way to make it permanent and read the new fonts like it does the ones the system installs or is that a no-no? end of line Tracer Shell commands: xset fp+ <new font directory> xset fp rehash -- ---KMail 1.2--- SuSE Linux v7.2--- Registered Linux User #225206 /tracerb(a)sprintmail.com/ *Magic Page Products* *Team Amiga* http://home.sprintmail.com/~tracerb

3 2

print from K-Mail run together
by Doug McGarrett 01 May '06

01 May '06

I don't remember seeing this problem on the list. KMail print on screen is clear and most letters are separated. When I print out a mail, some letters, particularly the "t", the "si" and the "sk" combinations are scrunched together with adjoining letters. I am printing to an HP 2200D laserjet. The typeface on screen (and on paper) is a sans-serif font. Even on screen, it is slightly scrunched in spots. "ri" and "ti" and "tt" and "th" are too close together. Suggestions? TNX--doug

5 6

Can't open Transcode tarball or it doesn't exist
by Peter B Van Campen 29 Apr '06

29 Apr '06

Hi Folks, I have been trying to get a tarball of transcode to compile on my SUSE 9.2 system. Every pkg I have d/l'd from the sites listed on the Transcode Wiki page: http://www.transcoding.org/cgi-bin/transcode are unopenable. Every one, including the beta versions. Have I made one of those embarrassing newby errors? Konqi Filemgr says : "The file does not exist" even tho it lists it. Is there a location for a transcode I can open and compile? PeterB p.s. The pkgs are unopenable on my SUSE 8.2 sys also -- -- Proud SUSE user since 5.2 Loving SUSE 9.2 My BLOG == http://vancampen.org/blog --

5 6

screen, mouse, kb lockup
by Doug McGarrett 26 Apr '06

26 Apr '06

While attempting to stop a video playing on Macro Media Flash Player 7, I managed to lock out everything. I could not move the mouse cursor, the arrow keys and the rest of the kb didn't work, ctl-alt-del did nothing. None of the function keys did anything. (The video was something downloaded from the 'net via Firefox.) I wound up pulling the big switch, as us hams like to say. Is there anything else I could have done? I'm trying to put Linux to practical use, and this is the first time I've seen 10.0 crash, so it's good, but not fool-proof. (If something can be broken, this fool will break it!)

3 2

Fwd: Re: [SLE] php4_unixODBC
by Sven Haberer 04 Apr '06

04 Apr '06

good idea - please see here: http://www.susewiki.org/index.php?title=HowTo:_PHP4_ODBC Hope this is detailed enough... BTW, thats my first wiki entry ever... Am Sonntag, 24. April 2005 22:36 schrieb Richard Bos: > Op zondag 24 april 2005 23:36, schreef Sven Haberer: > > If desired, I could post a short description how I did this... > > If you can put it own the wiki (http://www.susewiki.org) than we can all > maintain it. > > -- > Richard Bos > Without a home the journey is endless

3 2

External disk choice
by Maura Edelweiss Monville 11 Feb '06

11 Feb '06

I have a 4-year old DELL desktop with a heavy CRT monitor that I'm going to give away soon . I also have a 2 month old laptop. Both computers run Linux/SuSE. I would like to buy an external disk to save most of my s/w development now residing on my old desktop. But I would like to be able to use it also with my laptop. Both computers have some USB ports so I daresay an external USB disk would be fine .. I'd appreciate some suggestion about a USB reliable, large capacity but portable, external disk or any alternative solution. Thank you in advance. Maura

8 11

SCSI RAID recovery
by Robert Amodeo 19 Jan '06

19 Jan '06

I have a fileserver running SuSE 8.0 with 2 IDE Drives and a SCSI RAID (RAID5). The system boots up to one of the IDE drives, and the SCSI RAID drive runs as a mounted filesystem (/dev/md0). (all filesystems are REISERFS). Problem: The SCSI RAID drive has crashed (won't boot up), and I need to recover it (repair it, through some utility). Further: The software does not seem to want to mount the disks, even though the SCSI BIOS (Adaptec) recognizes the disks, and they are listed as OPTIMAL. I tried to repair the disk(s) (with reiserfsck), but it produced an error message: reiserfs_open: bread failed reading block 2 reiserfs_open: bread failed reading block 16 reiserfs_open: neither new nor old reiserfs form found on /dev/md0 The literature suggested that this error message is hardware related (either a disk is physically damaged, or maybe the RAID isn't recognized), but again, the disks are recognized (and therefore, so is the SCSI Card). I tried to boot up with SuSE CD 1 in Recovery mode, but not sure what to do there (i.e., after the root prompt - just run reiserfsck?). Literature suggests there are plenty of tools to handle disk recovery, and especially RAID support, I can't find reference to them anywhere. The installation of the RAID was trivial (using the YAST2 partitioning GUI window on startup), and yet recovery seems to be a mystery. This can't be right. Does anyone know where there are "decent" and "usable" recovery tools? OR ... does anyone know what "specifically" to do in this case? Can I re-partition without formatting, and recover the existing data? Any help is appreciated - I'm sure I'm missing something "obvious", but can't find "obviously" what to do in the literature, docs, etc. Thank you. Robert Amodeo School of Engineering and Applied Science University of California, Los Angeles

3 4

9.3 Review
by David Johanson 06 Jan '06

06 Jan '06

Linux Magazine (Linux Pro in the US) has a 4 page review of the 9.3 release in the June 2005 issue, pgs 44-47. "Novell's Suse Linux 9.3 is a feature-rich, and robust Linux distribution. At first glance, the new version does not seem much changed from 9.2, but a lot of work has gone on under the hood. The distribution is definitely good for new users. If you already have Suse Linux 9.x or a similarly recent system, the update is only worth the effort if you are unhappy with your current setup. If you use external media on a regular basis, the update is definitely a good idea. . . . " dave -- David C. Johanson Linux Counter # 116410 Powered by SuSE Linux 7.3 People who behold a phenomenon will often extend their thinking beyond it; people who merely hear about the phenomenon will not be moved to think at all. -- Goethe

12 14

help for sight impaired people
by Doug McGarrett 09 Dec '05

09 Dec '05

Some weeks ago I inquired here about assistance for those who have difficulty seeing, as I am one, at present. I am effectively blind in the left eye and have cataract in the right. Some of this may be ameliorated in the future, some will probably not be. Nothing came back at all. The font in K-Mail out-going is about 8 point on my 17" screen, as is the font on the message names for the incoming mail. I have not been able to change this, altho the actual incoming message font I was successful in changing. I do not have access to my Windows machine at present, due to mechanical failure, and this is the only way I have to communicate. Is there no way to make SuSE Linux friendly to optically-challenged users? Please, someone, reply. --doug

8 9

PC running (SuSE 8.2 Pro / WinME) bootloader lilo -> grub
by Mick Higgins 08 Dec '05

08 Dec '05

Hi List, I have belatedly made the change from lilo to grub carefully converting my lilo config to grub'ese. It seems to work as expected. However, I have a couple of questions which I cannot track down in any off-line source (man, info, howto's etc.) and I am not able to trawl google or list archive with a time-limited unmetered dial-up connection at present. 1. In lilo I always used the boot-floppy option so as not to upset WinME. How do I do something similar in grub? 2. When the bootloader menu appeared in lilo I could interactively overide the default runlevel (ie: boot to runlevel 3 not 5) when necessary. How is this achieved in the grub menu? I will accept a URL to the appropriate list archive entry or web page. Apologies if this has been dealt with before. -- ** Message sent via KDE KMail v1.7.2 on SuSE Linux v8.2 ** Please reply in the format that this message is sent. ** Thanks.

6 5

NTP set up in YAST is loosing time
by Peter B Van Campen 19 Nov '05

19 Nov '05

Hi, I have used NTP in previous SUSE 9.X, but on 9.3 I used YAST to set up NTP. YASTs dialog says that it will sync to a time server at bootup. In the past I am sure that the local PC was re-sync'd quite often. I rarely ever saw a difference of more than a second between my "Atomic" wall clock or watch. But now I see the PCs time getting more and more 'off' the longer it has been booted. This is irritating and non-intuitive. The systems should stay in sync with the 'official' time servers. One should NOT have to re-boot just to get the clock back in sync. Is the a way to tell the system to regularly 'sync up'? Has anyone out there found a way to keep a 9.3 system time accurate? PeterB

10 14

Time
by jim 13 Nov '05

13 Nov '05

Why is it everytime you boot into Suse10, that the time is different, the time zone doesn't change. Jim

2 4

stable,updated,zero-cost,FLOSS virus software
by David Storrs 17 Oct '05

17 Oct '05

What are people using for anti-virus software? I've got BitDefender running on my machine, but I'd like to find something zero-cost that has a nice GUI so that when I set up boxes for friends and family, they can use it. Regularly (and automatically) updated virus definitions are a must, here. Dave

9 10

icewm in SuSE 9.3
by eddieleprince 15 Sep '05

15 Sep '05

I've installed icewm from yast but I cannot seem to access it. Does anyone know how to change the display from kde to icewm? There doesn't seem to be any options in the login screen or the yast sysconfig editor that lists it as a choice for selection. Thanks Eddie

4 5

remote X vrs VNC
by lerninlinux＠comcast.net 22 Aug '05

22 Aug '05

While I realize VNC can be used on multiple os's, I saw a snip of an article that POed me. It claimed that you couldn't graphically remotely administer a Linux machine before VNC. I assume it was a newbie (as am I), but one who didn't know about X, or Webmin, and came from a PC Anywhere background. I have used VNC at my brothers, but haven't messed with x remotely; what are the benefits/limitations of either, relating to a Linux installation. Has anyone messed with X remotely going either way from a X.org machine to Xfree or vice versa. Trying to learn from others mistakes before I fiddle TIA Randal

9 10

AMD Opteron Laptops... Suggested ones for SuSE?
by Steve Kratz 18 Aug '05

18 Aug '05

Anyone out there used any of the AMD Opteron laptops, and how well have they worked with SuSE Linux?

2 1

accessing partitions
by John R. Sowden 08 Aug '05

08 Aug '05

I am having a poblem accessing partitions. I use dosemu to access three fat32 partitions: dosc, dosd, and dose. They point to /media/dosc, ... My fstab follows: /dev/hda3 / reiserfs acl,user_xattr 1 1 /dev/hda5 /home reiserfs acl,user_xattr 1 2 /dev/hda1 /media/dosc vfat auto,rw,users,exec 0 0 /dev/hda8 /media/dose vfat auto,rw,users,exec 0 0 /dev/hda9 /media/extra reiserfs user,acl,user_xattr 1 2 /dev/hda2 swap swap pri=42 0 0 devpts /dev/pts devpts mode=0620,gid=5 0 0 proc /proc proc defaults 0 0 usbfs /proc/bus/usb usbfs noauto 0 0 sysfs /sys sysfs noauto 0 0 /dev/dvdrecorder /media/dvdrecorder subfs noauto,fs=cdfss,ro,procuid, nosuid,nodev,exec,iocharset=utf8 0 0 /dev/fd0 /media/floppy subfs noauto,fs=floppyfss,procuid ,nodev,nosuid,sync 0 0 When I created the partitions, the mount points for the dos partitions had a user or root and a group of root, as indicated below. I changed these to john users, but it seems that it has changed back, on its own. I am now unable to write to these partitions. What are the two bottom entries of the /media for? What does user_xattr mean and why is it needed? Why is acl needed? I read about these in the Suse doc, and the Yast partition edit screen, but they do not say whay they are used. drwxr-xr-x 6 root root 4096 1969-12-31 16:00 dosc drwxr-xr-x 2 root root 4096 1969-12-31 16:00 dosd drwxr-xr-x 9 root root 4096 1969-12-31 16:00 dose drwxr-xr-x 6 john users 720 2005-06-23 00:20 dosx drwxr-xr-x 2 root root 48 2005-06-16 00:02 dvdrecorder drwxr-xr-x 4 root root 80 2005-06-16 00:02 extra drwxrwxrwx 1 root root 0 2005-06-26 21:10 floppy drwxr-xr-x 2 root root 48 2005-06-16 13:07 MAXTOR__40G drwxr-xr-x 4 root root 80 2005-06-16 00:02 secure drwxr-xr-x 3 john users 184 2005-06-16 15:19 securex drwxr-xr-x 2 root root 48 2005-06-18 17:15 SU930_001 drwxr-xr-x 2 root root 48 2005-06-19 16:52 SU930_001_1 Thoughts? John

9 14

9.3 install on Compaq 3017CL notebook hangs or fails to find hard drive
by Randall J. Parr 04 Aug '05

04 Aug '05

Have Compaq Presario 3017CL notebook with SuSE 9.2 installed and running fine. Trying to install/upgrade SuSE 9.3. When booting from the DVD and selecting "Installation", the system hangs while "Initializing". When booting from the DVD and selecting "Installation w/o ACPI" or "Installation - Safe mode" the installation ask for keyboard, etc. but then says it can find no hard drive. I did not experience a problem like this when installing SuSE 9.1 or SuSE 9.2 on this system. Any idea how to get past this? Boot parameters to try, etc.? Thanks R.Parr, RHCE Temporal Arts

11 26

Asterisk on Suse minimal installation based on Suse Rescue - what to add to be bootable on HD partition ?
by Robert Rozman 25 Jul '05

25 Jul '05

Hi, I'm trying to go route some of Asterisk users already proposed for Asterisk minimal system. I've started from Suse Rescue system image - I've put it into HD partition. But since rescue is spawned from working system it has empty /boot directories and is not directly bootable if put on HD. I've tried to transfer or install kernel and grub to this partition, but no success (I first access to partition with chroot to make additions...). I get errors on kernel rpm -ivh installation (I guess there are no directories and dependencies found in chroot) and also get error on "grub-install /dev/hda7": Could not find device for /boot: Not found or not a block device Is there anyone more experienced with some advice, howto or example what need to be added to partition to be bootable on HD ? Thanks in advance, regards, Rob.

2 1