December 2005 - openSUSE Users - openSUSE Mailing Lists

Firefox not working
by peevee 20 Dec '05

20 Dec '05

Hello all, I dont know y my firefox doesnt work, but my Knoqurer works fine, my firefox is able to resolve the domain name, but waits saying connecting.... and gives a time out message.. this is the same even in my ubuntu live boot cd, can any one give me any clue why this is happening? only knoqurer is working.... even gaim or any other browser dont work.. why ? any clue? -- PEEVEE

1 0

Re: [opensuse-announce] SUSE Linux 10.1 Alpha4 Uploading
by Aschwin Marsman 20 Dec '05

20 Dec '05

On Thu, 15 Dec 2005, Andreas Jaeger wrote: > * Further integration of NetworkManager (note: NetworkManager is on by > default on NLD/SUSE Linux and off on SLES) Why? NetworkManager is already removed from my SUSE 10.0 because it ate a lot of CPU cycles. What does it do what I do not can do without it? Is it's use optional? When I found out that my system was slow because of NetworkManager I did a "man NetworkManager" to find out what it brings me but no man page was found. Is that fixed for the factory version? (Currently downloading, it will take a while on a 5Mbit link). > Andreas Best regards, Aschwin Marsman -- aschwin(a)marsman.org http://www.marsman.org

6 7

Suse 10.0 OSS boot freezes after "boot.local done"
by Daniel Bauer 20 Dec '05

20 Dec '05

Hi everybody, I try and try and try to install Suse 10.0 OSS. Boot hangs during first reboot after showing the last two messages: System Boot Control: The system has been set up System Boot Control: Running /etc/init.d./boot.local done I've been looking around for hours and hours in google and forums, finding a lot of similar problems but no solution that worked. I did the first install using a downloaded Boot-CD. Then I downloaded all 5 CD's, burned them slowly, and try to installs with them now. But ftp-/CD-install make no difference. Here's what I tried: -boot option "acpi=off" (I always used this, because Suse 9.0 needed it, too) -tried to start with "failsave" option - no difference -tried additional boot-parameter "BrokenModules=yenta_socket" as proposed in another forum - no difference - made a completely new text-only installation (without x), same result... - again a new text-only installation, but now everything on same partition (except swap) - same result My computer: Motherboard ASUS P4PE/GBL/SATA/1394/GD-UAY with Intel 845 PE Chipset Pentium P4 2.4 Ghz 2x512 MB Memory CD-/DVD-ROM-Drive CD-Burner Zip-Drive Promise Ultra Controller 3 HD's, one one motherboards controller, 2 on promise, all as Master devices Adaptec SCSI card NVIDIA Gforce4 TI graphic card boot-line in Suse 9 additionally contains "desktop hdd=ide-scsi hddlun=0", this is not in the boot-line (menu-list) of Suse 10. I've added this, too, but: no change, freezes on same place. I tried to come to another console before the freeze occurs, but ALT-Fx didn't show another console (nor did CTRL-ALT-Fx), I tried F1 to F12... If you need to know more, tell me what (and if it isn't obvious, tell me how to find out - I can still start Suse 9 and find out...). Oh: I'm everything else than a computer-crack, so maybe tell me how to obtain any information you need, please. I would very much appreciate to receive help! Thanks. Daniel

4 9

Large File Transfer Problems
by Clint Tinsley 20 Dec '05

20 Dec '05

I have been having some challenges downloading large files such as DVD iso > 2 GB. Using Firefox is almost an invitation to disaster although I have been succesful on some and this isn't a 2.1 GB file size limitation. I check all downloads against the published MD5SUM from the download source. I usually have to fall back to using wget and getting the file download that way, which works. The other issue I am seeing is that on downloads from SMB sources (another Linux box samba share) using konquerer, the file will download to 100% and never finish, just sits there at 100%, not on all DVD iso's but some. In those cases, I have resorted to an FTP get which works without fail. Note, that I am able to work around the problems but the work around takes a bit more effort (and time) to implement. This is all on SuSE 10.0 Retail. Anyone else noticed these problems or have any suggestions? TIA Clint

2 1

Cloning a Suse 10 Partition & Ethernet problems
by Ignacio Verona 20 Dec '05

20 Dec '05

Hi! I'm trying to clone a Suse 10 partition to various nodes in a cluster, but I have a problem with the network interfaces. The installation I need to clone has one eth interface, which gets the ip by dhcp. The original node works great, but when I try to boot the cloned nodes, they seem to look for the original eth interface, with a specific MAC. Does any body know if SuSe links each interface configuration with it's MAC, o something like that? Or what's the problem? Thanks in advance, Ignacio.

4 5

need help with ccrashed suse 10 raid1 system
by Art Fore 20 Dec '05

20 Dec '05

I had a failure on /sev/sdb2. I tried backing up using tar to a USB drive, but something happened and if filled up the disk. There was about 27 GB on the 148 GB disk when I started. After it ran out of disk space, it locked up. on rebooting, it will not boot. Get the splash screen, then when booting, it hangs. Tried the rescue system, I can mount /dev/md0 /mnt and view the directories and files. Tried the suse installation, automatic recovery, it errors out on the hard disks. tried the fsck on sda2, but it fails with error 0x10. tried reiser.fsck, but it does nothing. I li /mnt/home I also get nothing listed. Also, If is start the installation, it recognizes the processor as AMD Hammer 64-bit, however, the processor is a Semperon 32-bit. Any suggestions on how I can fix this? Art

2 3

Problems with GLIBC
by talimades 20 Dec '05

20 Dec '05

Hello, Recently I have move from SuSE 8.2 to 9.2 and I have found some problems. I hope some one could help me with the more important. I had a software (fieldview) running perfectly in my SuSE 8.2, but after reinstall it in 9.2 it give me the following message when I try to use it: > jsa@talimades:~> fv > /usr/local/fv/bin/fvbin: relocation error: /usr/local/fv/bin/fvbin: symbol > errno, version GLIBC_2.0 not defined in file libc.so.6 with link time > reference Can you help me? Thank you. -- _________________________________________ - Talimades - _________________________________________

3 3

rkhunter and SuSE 10.0 - problems with db-update
by Kyek, Andreas, VF-DE 20 Dec '05

20 Dec '05

Hi, I'm running rkhunter (rpm from SuSE 10.0) as a rootkit checker. It is started by /etc/cron.daily/01-rkhunter, which is part of the rkhunter rpm. For anybody who is using rkhunter as well: - normally you should update the rkhunter db-Files on a regular base (rkhunter --update) in order to update the rkhunter database Files. - SuSE patched the os-db file (/var/lib/rkhunter/db/os.dat) in order to put the "SUSE LINUX 10*" entries in here Anybody who does the db-update will receive a new db-File which does no longer contain SUSE LINUX 10.0 as a valid os; so all md5-checks are skipped. Solution: create file /etc/cron.daily/001-rkhunter: --- cut here --- #!/bin/sh MY_VERSION="`grep -i ^suse /etc/SuSE-release`" if [ -e /etc/rkhunter.conf ]; then . /etc/rkhunter.conf else exit 1 fi /usr/bin/rkhunter --update | /bin/mail -s 'rkhunter Daily update' root if [ `grep -c "${MY_VERSION}" ${DBDIR}/os.dat` -eq 0 ]; then echo "999:${MY_VERSION}:/usr/bin/md5sum:/bin:" >> ${DBDIR}/os.dat fi --- cut here --- and rkhunter keeps on working. Andreas

1 0

SuSE 9.0 & IRDA
by Yuriy Chumak 20 Dec '05

20 Dec '05

Hello. I can not set up IRDA interface for my SuSE 9.0. FIR has been detected but irda0 interface was not appeared. Please, tell me how can I set up IRDA interface? Best Redards, Yuriy Chumak.

1 0

Trouble with KDE start
by B Stia 20 Dec '05

20 Dec '05

Hello SuSE people, This is a continuation of an earlier problem which I have partially solved. I had stupidly messed with my partition table amd ruined my 9.2 install. Finally reinstalled without formatting some partitions and was able to see, from the console as root, that all of my data was still there. Problem is I cannot get KDE to start as one user. (me) I can startx as root and KDE will come up. Following are various error messages I get when attempting to start KDE: From the cli in level 3 as a user issuing startx: .X.err permisssion denied. From the KDM login screen: EasyStreet kdm [5810]: Xserver for display :0 terminated unexpectedly. Directly after logon by user a screen with messages: Could not read network connection list /home/bob/.DCOPserver_EasyStreet_0 Please check that the "dcopserver" is running. No write access to $HOME (/home/bob) And in a little grey box at the top of the screen, the following : Could not start ksmserver. Check your installation. Fooled around checking various things, did another "repair system", which showed nothing wrong. I am unable to figure out what is wrong. Added a new user and it came up fine and worked OK. Uninstalled myself and the reinstalled myself as a user and it did not. Same problem.Will somebody give me some guidance/assistance please? Bob S. Please ??? PS Ken, I tried your suggestion but when I replaced the /home/bob directory the problem returned.

2 2

Re: [SLE] Mounting HDD
by David A. Parker 20 Dec '05

20 Dec '05

Gregory, I did not intend to utter anything, and I am sorry if my comments offended you. I was not the one who made the "pass yourself" comment, that was another person. I was simply saying that "Certified Computer Specialist" was a vague and ambiguous title, and possibly implied more experience with this sort of thing than you apparently had. Something like "Windows Certified Computer Specialist" would have made things a lot clearer. I didn't mean to "cut your hand off" when you were asking these questions. In fact, props to you for not only giving Linux a try, but installing it on a computer for someone else, too. Personally, I've been running Linux for about four years now, at home and at work, and rarely do I have to use Windows for anything, but I know what it's like to be used to Windows and then try to learn Linux. I was dual-booting Red Hat and Windows 98 for a while while I was still getting used to Linux. - Dave Parker Tasana Computers wrote: > The certification is in Windows, I am just getting into Linux. "pass > myself" is not a misnomer. I have had several years training in > Windows and hardware I am just reaching out to Linux and run it on > both of my computers in dual boot and this person did not want to buy > another OS and the 98SE was needing to be reinstalled, (beyond even > the "restore" for 98,) and Linux was all I had. I do not appreciate > what you implied by your comments and it should not have been uttered. > You must remember that 99% of training is in Windows and when someone > is reaching out to something new you don't cut their hand off. I would > bet that you cause more problems in trying to teach then you solve. A > good teacher never implies what you just did. > > David A Parker wrote: > >> Ken Schneider wrote: >> >>> On Mon, 2005-12-19 at 11:23 -0600, Tasana Computers wrote: >>> >>> >>>> I recently installed SUSE 10.0 on a Compaq PII and the client asked >>>> me to install a second HDD. I deleted the partitions that had 98SE >>>> on them using partition logic, I used this on both drives but did >>>> not format either drive. I then installed SUSE n the master and I >>>> never got the option to mount or format the second 3GB HDD. SUSE is >>>> now up and running and it sees the second drive but when I click on >>>> it I get the error that the drive is not mounted. I think since it >>>> was not formatted it can't see it. Where do I go from here to get >>>> SUSE to save to that drive???? >>>> >>> >>> >>> >>> Any OS needs to format the partition first -before- you can use it. >>> You can use the command df to show what it mounted and space >>> used/available. >>> >>> >>> >>>> Second issuse same computer. I downloaded audacity and it came in >>>> two packages. When I try to install either one (rpm's) i get the >>>> error that it needs the other one. How on earth do I get theis >>>> installed??? >>>> >>> >>> >>> >>> rpm -i *.rpm to have rpm work with both at the same time. >>> >>> >>> >>>> Thanks a heap >>>> >>>> -- >>>> Gregory D. Watts >>>> Poneyboy >>>> Certified Computer Specialist >>>> >>> >>> >>> >>> If you are going to pass yourself of as a "Certified Computer >>> Specialist" I think you need a little more training in linux first. The >>> two above items are actually pretty much basic items to know. >>> :-) >>> >>> >>> >> In rare cases (mainly on older Red Hat installations), I have had rpm >> still refuse to install multiple packages that require each other >> using "rpm -i *.rpm". In this case, "rpm -i --nodeps *.rpm" solves >> the problem. >> >> "Certified Computer Specialist"... Certified in what? Certified by >> whom? That's a pretty vague title. :-) >> > -- Dave Parker Utica College Department of Integrated Information Technology Services Data Processing Office (315) 792-3229

2 1

/media/ipod
by Art Fore 20 Dec '05

20 Dec '05

When I connect the ipod to suse 10.0, I get the above mount automatically. Question is, how to unmount it. Ipod displays a message "do not disconnect". It is a usb device and shows up under scsi2 with scsi monitor. How do I find out the /dev/device that it is or is there any other way to eject the ipod? Art

2 1

Artifact of conversion to KDE 3.5
by Paul W. Abrahams 20 Dec '05

20 Dec '05

I've encountered an odd bug, annoying but not critical, in the conversion from KDE 3.4.2 to KDE 3.5. If I use the KDE Control Center directly and go to Appearance and Themes / Background, I get the correct screen to set the desktop background. But if I use the taskbar icon for KCC (an applet, technically), which provides more direct access to Appearance and Themes, I just get a blank window when I then go to Background. Would anyone else care to take a minute and try this? Is it just me or is there a more general problem here? Paul

3 10

ssh -X and kate
by Scott Leighton 20 Dec '05

20 Dec '05

This has been bugging me and I'm hoping someone on the list can point me in the right direction. When I ssh -X from my laptop to the server (SuSE 9.3) and fire up kate, I get two instances of kate displaying on the laptop. This doesn't seem to happen with other apps, like yast2, konqueror or even open office, they result in the expected single instance. Anyone have any idea why this happens with kate and where I might look to make it stop? Scott -- POPFile, the OpenSource EMail Classifier http://popfile.sourceforge.net/ Linux 2.6.11.4-21.10-default x86_64 SuSE Linux 9.3 (x86-64)

1 0

dxr3 support
by Shibu Basheer 20 Dec '05

20 Dec '05

I have a dxr3 card I want to use with SuSE. Is this card supported in the SuSE kernel, or should I be compiling the modules from cvs? I plan to use the dxr3 card with vdr and mplayer. Thank you!

1 0

tooltips
by ajtiM 19 Dec '05

19 Dec '05

Hi! Again me...anybody have an idea how can I save a problem with tooltips in the panel. In the Control Center - Desktop - Panel - Appearance - I have checked just a Enable background image but tooltips on the Panel still show up. In the kickeirrc I have ShowToolTips=false. But if I check Enable icon mouseover effect and after that turn off (uncheck)m tooltips don't show up. I have the same problem as root as user. I also tried to setup new user and problem is still here. Thanks in advance, Mitja

4 9

Grip doesn't encode
by Rob Wright 19 Dec '05

19 Dec '05

Hello, I'm trying to rip/encode some CD's into .ogg format. I'm using Grip 3.2.0, OggEnc 1.0.1, and OpenSuse 10.0, all installed off the OpenSuse isos via Yast. Grip runs fine and I'm able to rip the files to .wavs. Watching the console in debug, it will call the encoder, then almost immediately say that the encoder has finished successfully. I've configured Grip to delete the .wav files after encoding, which it isn't doing, and to create a .m3u playlist, which it is doing. Grip does the exact same thing if I try to encode using lame. I can encode the .wav files left behind from the command line using either ogg or lame. I've checked my config in Grip and the path to my encoder is /usr/bin/oggenc, which is correct. I've used KAudioCreator, which rips and encodes just fine. Any ideas? I really like using Grip, but since installing the OpenSuse I haven't been able to. Thanks, Rob Wright suserob(a)poncacity.net

1 0

md5sum on SUSE 10.0 OSS x86-64 not working properly?
by Arrigo Marchiori 19 Dec '05

19 Dec '05

Hello everybody, this is the first message I write here. I'm sorry to introduce myself with this frightening problem, but I just encountered it... I hope it's frightening just for me! :-| I'm using SUSE Linux 10.0, installed from an Eval DVD and switched right afterwards to an OSS repository (so I guess this is the correct list). My computer is an Athlon64, I'm running the 64-bit edition of Linux. This is the problem: md5sums gives _different_ output on the _same_ file! arrigo@arrigo:~/temp> dd if=/dev/urandom bs=1M count=300 of=test.dat 300+0 records in 300+0 records out 314572800 bytes (315 MB) copied, 69.1124 seconds, 4.6 MB/s arrigo@arrigo:~/temp> md5sum test.dat 23a3f9ea48b3722df250dc5b6d378381 test.dat arrigo@arrigo:~/temp> md5sum test.dat 23a3f9ea48b3722df250dc5b6d378381 test.dat arrigo@arrigo:~/temp> md5sum test.dat 43e7f605c7d1b60373156bd453795e85 test.dat arrigo@arrigo:~/temp> Please believe me, I'm not joking: this is the actual output of md5sum, I gave those commands one right after the other, so the test.dat file wasn't touched among the tests. After some minutes I ran md5sum again and it gave the same output as the first two runs: arrigo@arrigo:~/temp> md5sum test.dat 23a3f9ea48b3722df250dc5b6d378381 test.dat arrigo@arrigo:~/temp> The md5sum is installed in my system is ver. 5.3.0, it's the default installed by SUSE. My system is up to date with the latest updates from YOU. The partition I've been working on is 46 GB large, formatted with ReiserFS, on an IDE hard disk. As a test, i downloaded version 5.93 of GNU coreutils, compiled it (I just ran ./configure and make) and ran this new md5sum: That version gave yet some different output: arrigo@arrigo:~/temp/coreutils/coreutils-5.93/src> ./md5sum ~/temp/test.dat 23a3f9ea48b3722df250dc5b6d378381 /home/arrigo/temp/test.dat arrigo@arrigo:~/temp/coreutils/coreutils-5.93/src> ./md5sum ~/temp/test.dat 23a3f9ea48b3722df250dc5b6d378381 /home/arrigo/temp/test.dat arrigo@arrigo:~/temp/coreutils/coreutils-5.93/src> ./md5sum ~/temp/test.dat 23a3f9ea48b3722df250dc5b6d378381 /home/arrigo/temp/test.dat arrigo@arrigo:~/temp/coreutils/coreutils-5.93/src> ./md5sum ~/temp/test.dat 583caa801a1f27fc9cfcd783f5d94ec7 /home/arrigo/temp/test.dat arrigo@arrigo:~/temp/coreutils/coreutils-5.93/src> ./md5sum ~/temp/test.dat 23a3f9ea48b3722df250dc5b6d378381 /home/arrigo/temp/test.dat arrigo@arrigo:~/temp/coreutils/coreutils-5.93/src> Again, the `real' value of the MD5 hash looks like the one starting with "23a" while sometimes I encountered different values. E.G. the 5.93 version, after some more trials, gave the following output: arrigo@arrigo:~/temp/coreutils/coreutils-5.93/src> ./md5sum ~/temp/test.dat 58913fa33641eb0bfa398f1643412259 /home/arrigo/temp/test.dat arrigo@arrigo:~/temp/coreutils/coreutils-5.93/src> That is different from any of the previous. Does anyone you have a clue about the cause of this? You know, computers are supposed to do correct calculations, that is that the same data should give always the same result!... My only idea right now is about the 64-bit system. Perhaps some other 32-bit running program switches the CPU in 32-bit mode, changing the results of md5sum? I tried re-compiling the coreutils in 32-bit version, that is running: $ CC="gcc -m32" ./configure $ CC="gcc -m32" make The resulting md5sum binary gave me, after some trials, another different value: 9f30d42e54af45b879700b776f1247e9 /home/arrigo/temp/test.dat Please let me know if you need any more information. If you want to repeat the steps I followed to exploit this, just pick a ~300 MB file and run repeatedly md5sum on it. I don't know if it works with different sizes, too. -- rigo http://rigo.altervista.org

2 3

Xen on Suse
by Paul Buede 19 Dec '05

19 Dec '05

I am interested in doing some testing with Xen. Is anyone out there using it? And more importantly, will it allow me to run other OS's inside the virtual machines? Or am I restricted to the Host OS? I want to do some work with virtual Redhat and virtual Suse boxes, but hopefully would use just one server running either Redhat or Suse as the host. Can you recommend why one host OS would be better than the other? -- Paul Buede Systems Engineer Netconn Solutions buedep(a)netcsc.com Office 301-739-9110 ext 2025 Cell 301-404-3941

4 5

Re: [SLE] suse 10 on cable modem at comcast.net
by lerninlinux＠comcast.net 19 Dec '05

19 Dec '05

-------------- Original message ---------------------- From: Joe Zien <jozien(a)cybercomm.net> > I got your e-mail on suse-linux-e(a)suse.com and notice > you use comcast.net with a cable modem. > I just ordered suse 10 and am a comcast cable user and plan > to go broadband with a comcast cable modem, at present I only have dial-up. > Did you have any problems using a cable modem and could you > give me any tips how you set it up in suse 10? > Any help would be appreciated. > > TIA > > jozien > > -- > Check the headers for your unsubscription address > For additional commands send e-mail to suse-linux-e-help(a)suse.com > Also check the archives at http://lists.suse.com > Please read the FAQs: suse-linux-e-faq(a)suse.com > > My background, my ISP went under and I was forced to upgrade to cable. I had bought the cable modem, from a local store (recovered freight sale) for $20 after rebate. I had more problems with the cable "people" then with the computers. As I have/had multiple computers, I picked up a router with Network address translation. Pluged it it, went to it's webpage, configured it, ran the network cable to the cable modem, ran a cable to outside the house (no cable at the time, and still don't use it for tv) and had Comcast do a service drop (if you have cable tv you already have that). They will require the mac address off the back of the cable modem, and it's serial number. If you already have either a network, or a network card, you are most likely already set up to receive your IP via, DHCP (Nat box, or Cable company directly). You can't have Comcast install it, as they don't support Linux (I can tell you from the experience at my parents, they are barely Windows/pc capable). I have had several different Linux distros, and so far, all of them have been automatically set to get their IP addresses by DHCP by default. Biggest tip, is if you need them to install it, keep the machine as a dual boot.

2 1

SuSE/Linux Ping vs DOS Ping
by David McMillan 19 Dec '05

19 Dec '05

G'day, fellow SuSE users. I've got a puzzler concerning ping responses that I hope someone can enlighten me about. I have a piece of industrial equipment that uses a TCP/IP Ethernet interface that I'm trying to troubleshoot at work. Part of the manufacturer's troubleshooting checklist is to "connect an DOS/Windows computer and use the PING command from the command line." Not having a D/W computer handy, I plugged in my SuSE 9.1 Pro laptop, but couldn't get a response. Not even a "connection refused," just silence. After some fairly exhaustive troubleshooting, this is what we found: 1: A DOS ping command, from another computer, using the same IP and netmask, over the same cable, got an immediate response. 2: The SuSE machine could not get a ping response, but *did* see the various open and filtered ports on the inustrial box, on the correct IP, when using nmap. 3: De/Re-activating SuSE Firewall made no difference. 4: The SuSE machine's ping command worked perfectly on a regular network, pinging Windows & *nix computers and various hardware routers without any difficulty. All I can think of is that there must be some minor difference between SuSE pings (or perhaps Linux pings in general) and DOS/Win pings that doesn't matter to most networks, but *does* matter for some reason to this piece of industrial hardware. Thoughts?

9 12

suseplugger
by Daniel Hatfield 19 Dec '05

19 Dec '05

Hello everyone, it's been a while. I've got an interesting problem here. Suseplugger doesn't seem to mount my USB hard drive properly anymore. If I let it automount, it will only transfer at USB 1 speed and shows the file system type as floppyfss. If I manually mount it using vfat as the filesystem everything is happy. So, I'm wondering if anyone knows where Suse stores it's settings for suseplugger (if that's even what controls it) and what I should change to get this working properly. Thanks, Daniel

2 1

Cannot copy (non-)encrypted DVD
by LLLActive＠GMX.Net 19 Dec '05

19 Dec '05

Hi all, --- 2 Problems with K3b on Novell SuSE 10.0 Boxed version --- *************** :: Problem 1 :: Cannot copy encrypted DVD I have created a Data DVD 4,7 GB with only data files. It is a DVD-RW. Now I wan't to copy the DVD to a normal DVD-R 4,7 GB. In K3b the error "Found encrypted DVD. Cannot copy encrypted DVDs" occurs. Debugging output of K3b: System ----------------------- K3b Version: 0.12 KDE Version: 3.4.2 Level "b" QT Version: 3.3.4 Kernel: 2.6.13-15.7-default Devices ----------------------- TEAC DV-W50D 1.05 (/dev/hdb, ) at /media/dvdrecorder [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-R; DVD-RW; DVD+R; DVD+RW] [DVD-ROM; DVD-R Sequential; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD +R; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite] HL-DT-ST DVD-ROM GDR8163B 0L23 (/dev/hdc, ) at /media/dvd [CD-ROM; DVD-ROM] [DVD-ROM; CD-ROM] [None] I'm sure it is not a encrypted! Where do I look for the solution? *************** :: Problem 2 :: "Project does not contain all necessary VideoDVD files". I used the options: "New Video DVD Project". I copied the *.mpg / *.mpeg file into the "VIDEO_TS" sub-directory. Then I tried to burn the new Video DVD. It is from a recording with my Video camera captured as a PAL DVD *.mpeg/*.mpg compatible file. This time K3b reports: System ----------------------- K3b Version: 0.12 KDE Version: 3.4.2 Level "b" QT Version: 3.3.4 Kernel: 2.6.13-15.7-default Devices ----------------------- TEAC DV-W50D 1.05 (/dev/hdb, ) at /media/dvdrecorder [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-R; DVD-RW; DVD+R; DVD+RW] [DVD-ROM; DVD-R Sequential; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD +R; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite] HL-DT-ST DVD-ROM GDR8163B 0L23 (/dev/hdc, ) at /media/dvd [CD-ROM; DVD-ROM] [DVD-ROM; CD-ROM] [None] K3b ----------------------- Size of filesystem calculated: 0 Used versions ----------------------- mkisofs: 2.1 mkisofs ----------------------- /usr/bin/mkisofs: Warning: -follow-links does not always work correctly; be careful. Warning: Disabling Joliet support for DVD-Video. /usr/bin/mkisofs: No such file or directory. Faild to open /tmp/kde-root/k3bVideoDvd0//VIDEO_TS/VIDEO_TS.IFO /usr/bin/mkisofs: Can't open VMG info for '/tmp/kde-root/k3bVideoDvd0/'. /usr/bin/mkisofs: Unable to parse DVD-Video structures. /usr/bin/mkisofs: Unable to make a DVD-Video image. As you can see, I even tried as root. Any help appreciated! :-) L3

5 7

suse 10 on cable modem at comcast.net
by Joe Zien 19 Dec '05

19 Dec '05

I got your e-mail on suse-linux-e(a)suse.com and notice you use comcast.net with a cable modem. I just ordered suse 10 and am a comcast cable user and plan to go broadband with a comcast cable modem, at present I only have dial-up. Did you have any problems using a cable modem and could you give me any tips how you set it up in suse 10? Any help would be appreciated. TIA jozien

8 9

Unable to get out
by Langsley 19 Dec '05

19 Dec '05

I have been trying for a week or so to unsubscribe from this list with no success. I've tried responding to the unsubscribe address in the header and get no response. I've tried sending a mail to the unsubscribe address without my email address, to which I get a confirm response but when I send a confirmation message nothing happens but I Continue getting email from this list. I tried the help address but all it does is send an automatic message telling me to do what I've already done.So I tried yet again and still I'm getting email from this list! Is there any one here who can help me unsubscribe from this list? I apologize for posting this here but I simply do not know where to turn. -- LTR Registered Linux user #280295 itisi(a)kvremcwb.com

4 3