May 2004 - openSUSE Users - openSUSE Mailing Lists

Problemas con los acentos y el teclado teclado ´a ´e ´i ´o ´u.
by Mich Buchanan 31 May '04

31 May '04

Hola, tengo un problemilla con los acentos, cada vez q reinicio el PC los acentos se me escriben mal ´a ´e ´i ´o ´u, sin embargo en cuanto corro el YAST2->teclado vuelven a salir bien, la configuracion del XF86config por sirve de algo es: Section "InputDevice" Driver "keyboard" Identifier "Keyboard[0]" Option "Protocol" "Standard" Option "XkbKeycodes" "xfree86" Option "XkbLayout" "es" Option "XkbVariant" "es" Option "XkbModel" "pc104+inet(btc9000)" #+inet(btc9000) lo he añadido por si acaso me detecta mi teclado que de momento no he conseguido q detecte todas las teclas extras de internet Option "XkbRules" "xfree86" EndSection Venga gracias por adelantado.

2 3

I cant see antialiased fonts with tk apps
by Mich Buchanan 31 May '04

31 May '04

Hi, the fonts on apps like sylpheed and amsn and other tk programs are very ugly I've got a Suse 9.1 fresh install is it normal, is there anyway to fix the fonts to appear ç antialiased? Greetings and thanks in advance.

1 0

modem configuration under 9.1
by Frits Wüthrich 30 May '04

30 May '04

I have a PCI softmodem, Creatix Polymedia V.9x DSP Dara Fax Modem. Under SUSE8.1 I could install the Intel driver, under 9.1 while trying to configure this modem through YAST2, YAST comes back with the message: These Packages need to be installed: Intel-536ep After hitting the continue button, a new message pops up: The required packages are not installed. The configuration will be aborted. Try Again? Well, trying again brings me back to the first error message. Anybody any suggestions? -- Frits Wüthrich

2 2

Feedback - gnome 2.6 for SuSE 9.1 at ftp.gwdg.de mirrors
by Andrei Verovski (aka MacGuru) 30 May '04

30 May '04

Hi, I have mirrored Gnome 2.6 for SuSE 9.1 at ftp.gwdg.de, and there seem to be some packages to be still missing, or mirroring was incomplete. Just try to install evolution with "apt-get install evolution". Here is the result: The following packages have unmet dependencies: evolution: Depends: libebook.so.5 Depends: libecal.so.4 Depends: libedataserver.so.3 Depends: libsoup-2.2.so.3 but it is not installable E: Broken packages

5 7

k3b problem, I think
by C Hamel 30 May '04

30 May '04

My box was online for 25.x hours w/o any problems ...until I used k3b. Then, it couldn't stay connected for more than two or three minutes before all throughput stopped & the logs showed a termination after four failed echo requests and it no longer worked until I rebooted. After that, all was normal, once more. The box had been up for roughly two days prior to this problem. Anyone else experiencing this behaviour? Am using FTP v9. -- ...CH SuSE 9 Works Linux user# 313696 Linux box# 199365

1 0

RE: [SLE] Suse 9.1 - NTFS not supported
by Ben Higginbottom 30 May '04

30 May '04

>Please is there a way to fix this? >Thanks When you boot your system the kernel is loaded into ram as part of a ramdisk, when you replace the kernel, either with a vanilla or one from suse your system map and modules are also replaced, so when the old kernel tries to do something that requires components not compiled into it, and cant find them because all the pointers to them have changed it complains. Rebooting of course solves these problems. Regards, Ben

1 0

Re: [SLE] Konqueror Audio CD Browser Not Working
by wmeler 30 May '04

30 May '04

I logged in as root (using 'sux -') and ran konqueror from a terminal as root. I then typed 'audiocd:/' in the Location bar and *poof* the tracks on the Audio CD came up. So, this problem is partially solved. I misread your point before about adding users to the disk group. I added wmeler to the disk group (following the method below), but it did not get rid of the problem from the wmeler user account. I even restarted the machine after adding the user to be 100% sure nothing weird was happening. When trying to use the Audio CD Browser as wmeler, I still get the message: An error occurred while loading audiocd:/: Access denied to /dev/sr0 For those following this thread in the future, here is how I added wmeler to the disk group: I went in to Yast-->Security and Users-->Edit and create groups (and clicked "Also view system groups") and added the user 'wmeler' to the disk group (by editing the group). Suggestions? Thanks! wmeler -----Original Message----- From: Pieter Hulshoff <phulshof(a)xs4all.nl> Sent: May 30, 2004 4:27 AM To: suse-linux-e(a)suse.com, wmeler <wmeler(a)earthlink.net> Subject: Re: [SLE] Konqueror Audio CD Browser Not Working On Sunday 30 May 2004 09:57, wmeler wrote: > An error occurred while loading audiocd:/: > Access denied to /dev/sr0 That's a problem with rights to /dev/sr0. Either change the rights so you can use it, or place the logins that you want to use this drive with in the disk group. Regards, Pieter Hulshoff Cheers, wmeler

3 2

Re: [SLE] Konqueror Audio CD Browser Not Working
by wmeler 30 May '04

30 May '04

I do not believe this is a file permission error. >From the wmeler user account, I set CD Device to "/dev/sr0" in Control Center (for Audio CDs-->CDDA Settings). The permissions were 777 for /dev/sr0 and it was owned by wmeler: >>>ls -al /dev/sr0 brwxrwxrwx 1 wmeler disk 11, 0 2002-09-09 16:24 /dev/sr0 I still get the following message: An error occurred while loading audiocd:/: Access denied to /dev/sr0 Suggestions? Thanks, wmeler -----Original Message----- From: Pieter Hulshoff <phulshof(a)xs4all.nl> Sent: May 30, 2004 4:27 AM To: suse-linux-e(a)suse.com, wmeler <wmeler(a)earthlink.net> Subject: Re: [SLE] Konqueror Audio CD Browser Not Working On Sunday 30 May 2004 09:57, wmeler wrote: > An error occurred while loading audiocd:/: > Access denied to /dev/sr0 That's a problem with rights to /dev/sr0. Either change the rights so you can use it, or place the logins that you want to use this drive with in the disk group. Regards, Pieter Hulshoff -- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq(a)suse.com Cheers, wmeler

1 0

Re: [SLE] export DISPLAY and xhost +
by Mark Gray 30 May '04

30 May '04

John Andersen <jsa(a)pen.homeip.net> writes: > On Friday 28 May 2004 22:23, Mark Gray wrote: >> Actually you need to change a line in /etc/sysconfig/displaymanager or >> SuSEconfig will rewrite the file every time it is called: (KDE is >> almost unusably slow as it is, using ssh -X is laughable). > No, you don't have to touch that, it works with no change. Sorry to disagree, but I only discovered the configuration variable after SuSEconfig had changed it back several times (take a look at the guilty code in /sbin/conf.d/SuSEconfig.xdm root@k6:~ # grep -5 nolisten /sbin/conf.d/SuSEconfig.xdm check_md5_and_move $file else echo "${0##*/}: change of $file skipped" fi if test "$DISPLAYMANAGER_XSERVER_TCP_PORT_6000_OPEN" = "no" ; then sed "s/$.*\/usr\/X11R6\/bin\/X$[ \t]*$-nolisten[ \t]*tcp[ \t]*\|$/\1 -nolisten tcp /g" < $file > ${file}.SuSEconfig check_md5_and_move $file elif test "$DISPLAYMANAGER_XSERVER_TCP_PORT_6000_OPEN" = "yes" ; then sed "s/$.*\/usr\/X11R6\/bin\/X$[ \t]*-nolisten tcp[ \t]*/\1 /g" < $file > ${file}.SuSEconfig check_md5_and_move $file else echo "${0##*/}: change of $file skipped" fi fi > And I also have acceptable performance with X over ssh, precisely > because it DOES compress the transmission. On local networks, or > fast wide area networks its actualy faster than running locally > because you have two processors involved. All the hard work for X > is offloaded to the machine where you sit, and all the other work is > done on the remote machine. To give ssh and KDE their due, I tend to keep using computers which most people would consider obsolete, and 9.1's KDE is right on the edge of needing to be replaced by something faster on my "antiques" :-)

4 3

No Sound with kdetv
by Terry Eck 30 May '04

30 May '04

I've installed 9.1 yesterday and am trying to get it setup with the same ability as my 8.2 version. Currently I have a problem with no sound when running kdetv. I've check the sound card under yast2 and can test for sound. Also, other applications show sound. I really need ideas at what to look for which will affect my problem. I've tried the configure-kdetv setting sound to ALSA Mixer Plugin using Line as the mixer element. The sound card is an Ensoniq Audio PCI. I checked all the settings I can think of under SuSE 8.2 (where I've never had problems with sound). This is really confusing. Can anyone help? BTW, thanks to those who helped me get the video working after I installed the nvidia drivers. -- SuSE Linux 9.1 (i586) ---- 2.6.4-54.5-default --- Sun 05/30/04 11:50 11:50am up 1:37, 1 user, load average: 1.06, 0.76, 0.39

1 0