openSUSE Users January 2004

users@lists.opensuse.org

597 participants
1235 discussions

Can anyone recommend a backup program/script for home user?
by Tom Nielsen 19 Feb '04

19 Feb '04

I was just about to setup a raid 1 when I realized I didn't want to really accomplish that. What I want is something to backup my system incase I fubar something. So, rather than dd my drive every night, I'm wondering how I can backup my system where only the changed files get backed up rather than the whole drive. I looked at rsync but I'm not sure if that's what I want. Any advice? Tom

15 17

Re: [SLE] Auto switch the mouse
by Ermanno Bonifazi 19 Feb '04

19 Feb '04

It works! Thanks a lot >From: Jan van Roessel <jwm.van.roessel(a)foxi.nl> >Reply-To: jwm.van.roessel(a)foxi.nl >To: "Ermanno Bonifazi" <ermannobonifazi(a)hotmail.com>, suse-linux-e(a)suse.com >Subject: Re: [SLE] Auto switch the mouse >Date: Tue, 13 Jan 2004 14:36:06 +0100 > >Maybe you could use Sax2 to congifure both mouses. This worked for me. > > > >Op dinsdag 13 januari 2004 12:52, schreef Ermanno Bonifazi: > > Hi to all. > > I've Suse running since some days in my Compaq Notebook. When I'm at >home I > > connect a USB Mouse to my notebook to be more confortable, but during >trip > > I ve no mouse attached. Suse will not recognize automatically that the > > mouse was disconnected, and I need manually get into Yast every time and > > set manually the Notebook embedd mouse. I run red hat since before >switch > > to Suse nad they do that automatically on boot. > > No way to do the same? > > > > _________________________________________________________________ > > Filtri antispamming e antivirus per la tua casella di posta > > http://www.msn.it/msn/hotmail > >-- >Met vriendelijke groeten / with kind regards >Jan van Roessel >Foxi Consultants in Technology BV >Ringbaan Oost 102-008 >5013 CD Tilburg >---------------------------------------------- >"On the side of the software box, in the 'System Requirements' section, >it said 'Requires Windows Xp or better'. So I installed Linux." >=========================================== >De in dit emailbericht verstrekte informatie is vertrouwelijk en >uitsluitend >bestemd voor de geadresseerde. Het kopieren van of verstrekken aan en >gebruik >door derden van deze informatie is niet toegestaan. Door de elektronische >verzending van dit bericht kunnen er geen rechten worden ontleend aan de >informatie. >This email and any files transmitted with it are confidential and intended >solely for the use of the individual or entity to whom they are addressed. >Copyright (c) 2004 Foxi C.i.T. BV All world wide rights reserved. >=========================================== > _________________________________________________________________ Filtri antispamming e antivirus per la tua casella di posta http://www.msn.it/msn/hotmail

2 1

fetchmail
by Carlos E. R. 19 Feb '04

19 Feb '04

Hi, Where is fetchmail home page? There is a project page at sourceforge, which is empty. On /usr/share/doc/packages/fetchmail/FAQ it says the home page is "http://www.tuxedo.org/~esr/fetchmail". This doesn't exist either, it drops me at "http://www.tuxedo.org/" instead. Talking of sourceforge... when I go there, depending on which ISP I use, I see this error: |Not Found |The requested URL |/your_machine_has_been_blocked_by_sourceforge.net_due_to_heavy_volume was |not found on this server. | |Apache/1.3.27 Server at nimrodel.valinor Port 80 Any body knows anything about that? I'm certainly not a heavy user, my IP is dynamic, using a V90 modem -- Cheers, Carlos Robinson

5 19

realplayer init config screens garbled
by Jim Osborn 10 Feb '04

10 Feb '04

After installing the realplayer linux rpm from the link at the real.com site, when I invoke the player, it presents a configuration screen, which seems reasonable after a first-time install. Trouble is, the config screen is full of little square boxes where the text should be. The player itself, visible briefly behind the config boxes, seems to have normal fonts, text, etc. Without the config process, I can't get the player to do anything. I have LANG=en_US, and all my other apps seem to work fine. There's no mention of this problem in the installed help docs, or on the tech support section of the real.com site. I thought I'd ask here for experiences before poking around, as I don't have any good ideas of where to start. I notice a very extensive "known issues" file for the Linux version, and I wonder if everyone goes through a long process of fixing some of those issues, many of which seem to be missing links, or files not copied. Or is there a less-buggy version of realplayer out there that I should be looking at? Do people have better luck with the tarball? Or is there something else more Linux-native that I should be looking at to do what realplayer is supposed to do, in my case, listening to streaming audio from various sites? All the links I've seen seem to be either M$ or realaudio. Here's my setup: SuSE 7.3 distro, with KDE 2-something/Qt2, X11-3.3.6, kernel upgraded to 2.4.23, Intel P-II. I installed the realplayer rpm as root, fwiw. I can supply more config info if it'd make sense; at this point, I'm just poking around in the dark. TIA, Jim

2 2

apache2 and pdf mime type
by Adam Naumowicz 09 Feb '04

09 Feb '04

Hi, I'm having problems with configuring apache2 under SuSE 9.0 to work correctly with some web browsers (including MSIE 6.0) when trying to retrieve .pdf files. Apparently, the mime-type definition application/pdf used by apache's module differs from the one used by the browser - in the apache's log file I can see that the server responds with code 206 (why partal download?) and the browser complains that the file doesn't start with a valid .pdf magic string, i.e. %PDF-. Does anyone know how to solve the problem? Any help appreciated, Adam Naumowicz --------------------------------- Do you Yahoo!? Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes

3 3

Apache 2 & virtual domains shows only one site for all addresses
by Ronald Wiplinger - via SeedNet SMTP 09 Feb '04

09 Feb '04

I thought I have solved it, but .... I have added all modules to /etc/sysconfig/apache2 to use %0, but it does not help. I moved back to SuSE suggestion including vhost_alias. I have made according the ../vhosts.d/vhost.template some copies of my domains. (only replacing dummy-host.example.com with my website names and saved the file with the name of the web site followed by ".conf" First only three and restarted apache2: All sites show only one site, independent how I call it out of the three site.conf files I added two more and get than during startup a message: ... [warn] _default_ VirtualHost overlap on port 80, the first has precedence Any hints please! I am exhausted! bye Ronald

2 1

VNC (again ?)
by Koenraad Lelong 06 Feb '04

06 Feb '04

Hi, I'm trying to setup VNC so I can remotely administer a "appliance-box" (= no screen, no keyboard, no mouse). I have it running partly, but I can't setup the last piece. If I'm logged in at the appliance (screen, keyboard & mouse still connected) I can connect, and everything works fine. When I'm not logged in, and I try to connect all I get is a blank X-screen, nothing to log in. What do I have to setup to get a login screen ? Any pointers ? I'm running SuSE 9. TIA. B.T.W. Is there a searcheable archive of this list ? AFAIK the archives at SuSE are not searcheable, or do I miss something ? -- Met vriendelijke groeten, Koenraad Lelong R&D Manager ACE electronics n.v.

5 7

Hylafax versus WinFaxpro
by John Boyle 06 Feb '04

06 Feb '04

To Add to the question nobody wants to answer: What is hylafax and where does one get it? Is it better than WinFaxPro? :-)

8 19

dbz.h what package provides in 9.0
by sean＠tcob1.net 05 Feb '04

05 Feb '04

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 As per subject? Sean - -- GPG Key Id 120A02FB ICQ: 679813 Jabber: tcobone(a)jabber.org TCOB1.net hosting service now availble -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.2 (GNU/Linux) Comment: This key has an expiry date iD8DBQFAGlX7XjH8pRIKAvsRAnSwAKDCaLuA8zYamKUXO0FAdyUUcV7crwCaAgfS JWo5j0f1HWbpm0kL3IjF2HQ= =0WQU -----END PGP SIGNATURE-----

3 6

k_smp-2.4.20-102 deemed harmful to cdrecord
by David Krider 05 Feb '04

05 Feb '04

I can't believe this nonsense. I have been abusing myself for something like 5 years with "Linux on the desktop," always thinking that the next release would be "it." Today, I'm trying to burn a CD. JUST BURN A CD! And on two separate -- though very similar -- computers, I'm getting the exact same nonsense. (Which is to say that it's not my hardware, both of which have worked just fine the last time I tried on each.) I'm long past trying to burn as a normal user. Oh no. That would be too hard. I can't even burn as root any more. It's really simple. I have a completely-SCSI setup. ``cdrecord --scanbus'' as root sees all my hardware. 0,0,0 0) 'IBM ' 'DDYS-T18350N ' 'S96H' Disk 0,1,0 1) 'SEAGATE ' 'ST318437LW ' '0105' Disk 0,2,0 2) 'PLEXTOR ' 'CD-ROM PX-40TS ' '1.11' Removable CD-ROM 0,3,0 3) 'PLEXTOR ' 'CD-R PX-W124TS' '1.05' Removable CD-ROM 0,4,0 4) 'IOMEGA ' 'ZIP 100 ' 'J.03' Removable Disk 0,5,0 5) * 0,6,0 6) * 0,7,0 7) * But today, all of a sudden, I get crap like this (in this example, I'm just trying to burn the image for the SuSE 8.2 boot CD, so I know it's good): enterprise:/home/david/tmp # cdrecord -v dev=0,3,0 speed=12 root Cdrecord 2.0 (i686-suse-linux) Copyright (C) 1995-2002 J?rg Schilling TOC Type: 1 = CD-ROM scsidev: '0,3,0' scsibus: 0 target: 3 lun: 0 Linux sg driver version: 3.1.24 Using libscg version 'schily-0.7' cdrecord: Warning: using inofficial libscg transport code version (okir(a)suse.de-scsi-linux-sg.c-1.75-resmgr-patch '@(#)scsi-linux-sg.c 1.75 02/10/21 Copyright 1997 J. Schilling'). atapi: 0 Device type : Removable CD-ROM Version : 2 Response Format: 2 Capabilities : SYNC LINKED Vendor_info : 'PLEXTOR ' Identifikation : 'CD-R PX-W124TS' Revision : '1.05' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : MMC SWABAUDIO Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 2373168 = 2317 KB FIFO size : 4194304 = 4096 KB Track 01: data 44 MB Total size: 51 MB (05:05.38) = 22904 sectors Lout start: 51 MB (05:07/29) = 22904 sectors cdrecord: Input/output error. start/stop unit: scsi sendcmd: no error CDB: 1B 00 00 00 01 00 status: 0x2 (CHECK CONDITION) Sense Bytes: F0 00 0B 00 00 00 00 00 Sense Key: 0xB Aborted Command, Segment 0 Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0 Sense flags: Blk 0 (valid) cmd finished after 0.000s timeout 40s Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is not unrestricted Is not erasable Disk sub type: Medium Type A, high Beta category (A+) (3) ATIP start of lead in: -11634 (97:26/66) ATIP start of lead out: 359848 (79:59/73) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 3 Manufacturer: CMC Magnetics Corporation Blocks total: 359848 Blocks current: 359848 Blocks remaining: 336944 Starting to write CD/DVD at speed 12 in real TAO mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Starting new track at sector: 0 Track 01: 1 of 44 MB written (fifo 100%) [buf 67%] 23.9x.cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 03 A2 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: F0 00 0B 00 00 00 00 00 Sense Key: 0xB Aborted Command, Segment 0 Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0 Sense flags: Blk 0 (valid) cmd finished after 0.000s timeout 40s write track data: error after 1904640 bytes Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00 Writing time: 26.126s Average write speed 28.3x. Fixating... Fixating time: 24.048s cdrecord: fifo had 94 puts and 31 gets. cdrecord: fifo was 0 times empty and 13 times full, min fill was 95%. I know what errors like this are about. I know how involved, and how machine-specific they can be. I know there's no chance that someone can tell me what the problem would be. I keep up with all the patches, so the best I can hope for is for someone to tell me that the latest kernel or bugfix patch screwed something up. Otherwise, I think I'll just go insane. There's no excuse for this. Linux just CAN'T be this hard, or it will NEVER succeed on the desktop. Whatever is going on, I'll take the blame. Since it's not hardware, it's got to be software, and how I manage my machines. But, MAN!, I'm not a noob. I've working with Linux for almost 10 years now, and I'm a Unix admin in my day job. It's not like I don't know what I'm doing! Problematic CD burning was the final straw with Red Hat 8.0 for me. I actually filed a bug that got to be well known on their list, but the bug remained through 9, and it's probably still in Fedora, though I'm well past caring. I guess I'm just writing this to vent my frustration. If by some miracle, someone can actually tell me how to fix this, I'll just consider myself lucky. And, yes, I Googled myself silly with these messages. I even downloaded the entire backlog of the cdrecord-support listserv. Lots of people have the problems *like* this, and apparently NO ONE has any answers, even the guy who wrote cdrecord. Post mortem: I stared at my navel for a few minutes and downgraded to the k_smp-2.4.20-100 kernel. That was it. It's apparently been that long since I tried to burn a disc. I still say that there's no excuse for this. Why did a security fix break burning CD's? Who knows. Again, this sort of thing is pretty hardware-specific, I know. Aaaargh! Sigh, dk P.S. Just in case you're still reading, here's the nonsense from the messages file, in case anyone might be able to do something with it. If someone involved with the kernel development wants to contact me, I'd work myself silly getting whatever logs or scans or whatever is needed to fix this. Jan 30 21:20:17 enterprise kernel: scsi0:0:3:0: Attempting to queue an ABORT message Jan 30 21:20:17 enterprise kernel: CDB: 0x0 0x0 0x0 0x0 0x0 0x0 Jan 30 21:20:17 enterprise kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< Jan 30 21:20:17 enterprise kernel: scsi0: Dumping Card State in Command phase, at SEQADDR 0x178 Jan 30 21:20:17 enterprise kernel: Card was paused Jan 30 21:20:17 enterprise kernel: ACCUM = 0x80, SINDEX = 0xa0, DINDEX = 0xe4, ARG_2 = 0x3 Jan 30 21:20:17 enterprise kernel: HCNT = 0x0 SCBPTR = 0x1d Jan 30 21:20:17 enterprise kernel: SCSISIGI[0x84]:(BSYI|CDI) ERROR[0x0] SCSIBUSL[0xc0] Jan 30 21:20:17 enterprise kernel: LASTPHASE[0x80]:(CDI) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI) Jan 30 21:20:17 enterprise kernel: SBLKCTL[0xa]:(SELWIDE|SELBUSB) SCSIRATE[0x15]:(SINGLE_EDGE) Jan 30 21:20:17 enterprise kernel: SEQCTL[0x10]:(FASTMODE) SEQ_FLAGS[0x0] SSTAT0[0x5]:(DMADONE|SDONE) Jan 30 21:20:17 enterprise kernel: SSTAT1[0x2]:(PHASECHG) SSTAT2[0x10]:(EXP_ACTIVE) SSTAT3[0x0] Jan 30 21:20:17 enterprise kernel: SIMODE0[0x8]:(ENSWRAP) SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO) Jan 30 21:20:17 enterprise kernel: SXFRCTL0[0x88]:(SPIOEN|DFON) DFCNTRL[0x4]:(DIRECTION) Jan 30 21:20:17 enterprise kernel: DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) Jan 30 21:20:17 enterprise kernel: STACK: 0x35 0xee 0x170 0x186 Jan 30 21:20:17 enterprise kernel: SCB count = 36 Jan 30 21:20:17 enterprise kernel: Kernel NEXTQSCB = 19 Jan 30 21:20:17 enterprise kernel: Card NEXTQSCB = 19 Jan 30 21:20:17 enterprise kernel: QINFIFO entries: Jan 30 21:20:17 enterprise kernel: Waiting Queue entries: Jan 30 21:20:17 enterprise kernel: Disconnected Queue entries: Jan 30 21:20:17 enterprise kernel: QOUTFIFO entries: Jan 30 21:20:17 enterprise kernel: Sequencer Free SCB List: 13 25 21 9 12 0 30 27 1 10 3 20 2 4 23 11 14 8 19 6 18 17 24 7 22 16 26 15 31 5 28 Jan 30 21:20:17 enterprise kernel: Sequencer SCB Info: Jan 30 21:20:17 enterprise kernel: 0 SCB_CONTROL[0xc0]:(DISCENB|TARGET_SCB) SCB_SCSIID[0x37] Jan 30 21:20:17 enterprise kernel: SCB_LUN[0x0] SCB_TAG[0xff] Jan 30 21:20:17 enterprise kernel: 1 SCB_CONTROL[0xc0]:(DISCENB|TARGET_SCB) SCB_SCSIID[0x37] Jan 30 21:20:17 enterprise kernel: SCB_LUN[0x0] SCB_TAG[0xff] Jan 30 21:20:17 enterprise kernel: 2 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17] Jan 30 21:20:17 enterprise kernel: SCB_LUN[0x0] SCB_TAG[0xff] Jan 30 21:20:17 enterprise kernel: 3 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17] Jan 30 21:20:17 enterprise kernel: SCB_LUN[0x0] SCB_TAG[0xff] Jan 30 21:20:17 enterprise kernel: 4 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17] Jan 30 21:20:17 enterprise kernel: SCB_LUN[0x0] SCB_TAG[0xff] Jan 30 21:20:17 enterprise kernel: 5 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17] Jan 30 21:20:17 enterprise kernel: SCB_LUN[0x0] SCB_TAG[0xff] Jan 30 21:20:17 enterprise kernel: 6 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17] Jan 30 21:20:17 enterprise kernel: SCB_LUN[0x0] SCB_TAG[0xff] Jan 30 21:20:17 enterprise kernel: 7 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17] Jan 30 21:20:17 enterprise kernel: SCB_LUN[0x0] SCB_TAG[0xff] Jan 30 21:20:17 enterprise kernel: 8 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17] Jan 30 21:20:17 enterprise kernel: SCB_LUN[0x0] SCB_TAG[0xff] Jan 30 21:20:17 enterprise kernel: 9 SCB_CONTROL[0xc0]:(DISCENB|TARGET_SCB) SCB_SCSIID[0x37] Jan 30 21:20:17 enterprise kernel: SCB_LUN[0x0] SCB_TAG[0xff] Jan 30 21:20:17 enterprise kernel: 10 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17] Jan 30 21:20:17 enterprise kernel: SCB_LUN[0x0] SCB_TAG[0xff] Jan 30 21:20:17 enterprise kernel: 11 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17] Jan 30 21:20:17 enterprise kernel: SCB_LUN[0x0] SCB_TAG[0xff] Jan 30 21:20:17 enterprise kernel: 12 SCB_CONTROL[0xc0]:(DISCENB|TARGET_SCB) SCB_SCSIID[0x37] Jan 30 21:20:17 enterprise kernel: SCB_LUN[0x0] SCB_TAG[0xff] Jan 30 21:20:17 enterprise kernel: 13 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17] Jan 30 21:20:17 enterprise kernel: SCB_LUN[0x0] SCB_TAG[0xff] Jan 30 21:20:17 enterprise kernel: 14 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17] Jan 30 21:20:17 enterprise kernel: SCB_LUN[0x0] SCB_TAG[0xff] Jan 30 21:20:17 enterprise kernel: 15 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17] Jan 30 21:20:17 enterprise kernel: SCB_LUN[0x0] SCB_TAG[0xff] Jan 30 21:20:17 enterprise kernel: 16 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17] Jan 30 21:20:17 enterprise kernel: SCB_LUN[0x0] SCB_TAG[0xff] Jan 30 21:20:17 enterprise kernel: 17 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17] Jan 30 21:20:17 enterprise kernel: SCB_LUN[0x0] SCB_TAG[0xff] Jan 30 21:20:17 enterprise kernel: 18 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17] Jan 30 21:20:17 enterprise kernel: SCB_LUN[0x0] SCB_TAG[0xff] Jan 30 21:20:17 enterprise kernel: 19 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17] Jan 30 21:20:17 enterprise kernel: SCB_LUN[0x0] SCB_TAG[0xff] Jan 30 21:20:17 enterprise kernel: 20 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17] Jan 30 21:20:17 enterprise kernel: SCB_LUN[0x0] SCB_TAG[0xff] Jan 30 21:20:17 enterprise kernel: 21 SCB_CONTROL[0xc0]:(DISCENB|TARGET_SCB) SCB_SCSIID[0x37] Jan 30 21:20:17 enterprise kernel: SCB_LUN[0x0] SCB_TAG[0xff] Jan 30 21:20:17 enterprise kernel: 22 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17] Jan 30 21:20:17 enterprise kernel: SCB_LUN[0x0] SCB_TAG[0xff] Jan 30 21:20:17 enterprise kernel: 23 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17] Jan 30 21:20:17 enterprise kernel: SCB_LUN[0x0] SCB_TAG[0xff] Jan 30 21:20:17 enterprise kernel: 24 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17] Jan 30 21:20:17 enterprise kernel: SCB_LUN[0x0] SCB_TAG[0xff] Jan 30 21:20:17 enterprise kernel: 25 SCB_CONTROL[0xc0]:(DISCENB|TARGET_SCB) SCB_SCSIID[0x37] Jan 30 21:20:17 enterprise kernel: SCB_LUN[0x0] SCB_TAG[0xff] Jan 30 21:20:17 enterprise kernel: 26 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17] Jan 30 21:20:17 enterprise kernel: SCB_LUN[0x0] SCB_TAG[0xff] Jan 30 21:20:17 enterprise kernel: 27 SCB_CONTROL[0x80]:(TARGET_SCB) SCB_SCSIID[0x37] SCB_LUN[0x0] Jan 30 21:20:17 enterprise kernel: SCB_TAG[0xff] Jan 30 21:20:17 enterprise kernel: 28 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17] Jan 30 21:20:17 enterprise kernel: SCB_LUN[0x0] SCB_TAG[0xff] Jan 30 21:20:17 enterprise kernel: 29 SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x37] SCB_LUN[0x0] Jan 30 21:20:17 enterprise kernel: SCB_TAG[0xe] Jan 30 21:20:17 enterprise kernel: 30 SCB_CONTROL[0xc0]:(DISCENB|TARGET_SCB) SCB_SCSIID[0x37] Jan 30 21:20:17 enterprise kernel: SCB_LUN[0x0] SCB_TAG[0xff] Jan 30 21:20:17 enterprise kernel: 31 SCB_CONTROL[0xe0]:(TAG_ENB|DISCENB|TARGET_SCB) SCB_SCSIID[0x17] Jan 30 21:20:17 enterprise kernel: SCB_LUN[0x0] SCB_TAG[0xff] Jan 30 21:20:17 enterprise kernel: Pending list: Jan 30 21:20:17 enterprise kernel: 14 SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x37] SCB_LUN[0x0] Jan 30 21:20:17 enterprise kernel: Kernel Free SCB list: 18 28 0 30 29 20 15 26 12 2 35 13 1 4 31 22 10 25 11 27 8 7 9 16 23 34 21 17 3 24 5 6 33 32 Jan 30 21:20:17 enterprise kernel: Untagged Q(3): 14 Jan 30 21:20:17 enterprise kernel: DevQ(0:0:0): 0 waiting Jan 30 21:20:17 enterprise kernel: DevQ(0:1:0): 0 waiting Jan 30 21:20:17 enterprise kernel: DevQ(0:2:0): 0 waiting Jan 30 21:20:17 enterprise kernel: DevQ(0:3:0): 0 waiting Jan 30 21:20:17 enterprise kernel: DevQ(0:4:0): 0 waiting Jan 30 21:20:17 enterprise kernel: Jan 30 21:20:17 enterprise kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> Jan 30 21:20:17 enterprise kernel: scsi0:0:3:0: Device is active, asserting ATN Jan 30 21:20:17 enterprise kernel: Recovery code sleeping Jan 30 21:20:17 enterprise kernel: (scsi0:A:3:0): Abort Message Sent Jan 30 21:20:17 enterprise kernel: (scsi0:A:3:0): SCB 14 - Abort Completed. Jan 30 21:20:17 enterprise kernel: Recovery SCB completes Jan 30 21:20:17 enterprise kernel: Recovery code awake Jan 30 21:20:17 enterprise kernel: aic7xxx_abort returns 0x2002

6 7

Jump to page:

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

1996

1995

1994

1993

1992

openSUSE Users January 2004