September 2002 - openSUSE Users - openSUSE Mailing Lists

Laptop with Home network and Work network
by Art Fore 02 Sep '02

02 Sep '02

I have a laptop with SuSE 8.0, KDE 3.0.2. Work network is Win2k, Home network is NFS with NIS. Computer has two network cards, mainly because of the builtin winmodem, so have a PCMCIA modem/network card. Question is how is the best way to setup the two networks so I don't have to go and change gateway, dhcp, etc. when going from work to home network? Art

1 0

RE: [SLE] How do I setup a joystick in 8.0??
by John Ross Hunt 01 Sep '02

01 Sep '02

> Gameport on an Ensoniq Soundblaster PCI128. > > Thanks, > Tom The file will be either /etc/asound.state or /etc/asound.conf (depending on which version of ALSA you're running). There's a boolean option to turn on the joystick. If it's false, change it to true, save the file and execute: $ alsactl store # to save the changes $ alsactl restore # to re-load the changes Then, you should be able to load a joystick driver. Mine's a sidewinder, so I just do: $ modprobe -a sidewinder and it's ready to go. If you configure your sound card with YaST2, I believe there's a section to enable and choose joystick models, but I'm not certain about that. Good luck, -- John Ross Hunt johnrosshunt(a)attbi.com <mailto:johnrosshunt@attbi.com>

1 0

Re: [SLE] Laptop Wireless
by Branton Boehm 01 Sep '02

01 Sep '02

> > > > I'm attempting to get my internal wireless card in my IBM Thinkpad R30 > > working correctly. The card was dectected by YaST and comes up as >"Harris > > Semiconductor". YaST configures the card as eth1. > > > >Good, that means cardmanager is working. >Next grab the file wireless_tools.25.tar.gz. > >wget http://pcmcia-cs.sourceforge.net/ftp/contrib/wireless_tools.25.tar.gz >and install the tools. I had already installed the wireless-tools package from the SuSE 8.0 CD's. Is this good enough? > > > If, however, I try to "ifconfig eth1 up", I get the following error >message: > > > >Don't fret there is hope ! > >I added this to /etc/pcmcia/config to get my SpeedStream PCMCIA card to >work. > >card "SpeedStream Wireless PCMCIA" > manfid 0x02ac, 0x0002 > bind "orinoco_cs" Was I supposed to add this? > > >So as root with PCMCIA card in run > >cardctl -config > >and then toos the ouuput back to the list ..OK ? Remember that this is an internal card--it's always in. I don't know if that makes a difference or not. Here's the output: # cardctl config Socket 0: not configured Thanks a lot for your help. Again, just let me know if you need more information or if I need to install the wireless-tools again. --Branton Boehm _________________________________________________________________ Chat with friends online, try MSN Messenger: http://messenger.msn.com

2 1

Memory Leak?
by Dwayne Cox 01 Sep '02

01 Sep '02

I have been wrestling with this problem for a while and I need help. With the computer 'idle', the available memory on it drops from around 471MB to 284MB in about a day or so (I use free to check the memory as well as gkrellm). This happens consistently, even if I do not start X. I have tried several things including replacing the NVidia card with a Radeon 7500 (suspecting drivers) and running a different kernel (2.4.7). I am considering reinstalling SUSE altogether or checking out a different distribution. I desparately need some suggestions. I want to install Oracle8i and Oracle9i but would like to get this resolved first. My current configuation: Dell 4300 512MB RAM Radeon 7500 SUSE 7.2 XFree86 4.2.0 kernel - 2.4.16-4GB Let me know if there is any other configuration info you need. Thanks in advance! Dwayne

3 4

YAST2 - modules don't work and report a bug
by Ian P 01 Sep '02

01 Sep '02

Since my upgrade from KDE 3.0.2 to KDE 3.0.3. the modules in Yast2 have stopped working. I had this same problem with KDE 3.0.0 to 3.0.1 upgrade but lived with it until KDE 3.0.2 which fixed it. I have applied all the yast2 patches etc. I run a Yast2 module (e.g. Hardware/Edit Printers) from my user login and enter the Administration mode and enter the correct password which is accepted. It then displays "YaST2 is starting up" for a short while and then nothing else happens. I've tried this from the Control Centre and menus but the same thing happens. I also tried Network/Advanced but got the same message. But the modules work when running the ncurses version. I have searched the lists/faqs but no joy. Does anyone know where I can report this as a bug - I've searched for bug reporting procedures on SuSE web site but I can't see anything relevant. TIA Ian

2 3

AIM and ICQ under Linux
by Phoenix 01 Sep '02

01 Sep '02

Hi everyone! I want to use the ICQ and AIM messenging services. For ICQ I'm using KXicq2 but the features are relatively limited. For AIM I haven't found anything great yet. I tried using "kaim" and "gaim". Kaim doesn't work. If I start it from a shell it tells me this: Xlib: extension "GLX" missing on display ":0.0". Then the logon window pops up and as soon as I try to log on it just quits and says: Segmentation fault. Gaim seems to run, but it doesn't download my AIM buddy list from the server. Do I have to change some settings so that it downloads the buddy list? Or does it just not support this feature? Are there any other/better programs to use? Regards, Phoenix

3 2

geforce2: yast2 or nvidia?
by Thom Nuzum 01 Sep '02

01 Sep '02

Hi . sorry i lost my notes and cant remember how to do this. I know there was a problem simply using yast2 to enable 3d. last time i was met with a blank screen and frozen system. The drivers are installed. should i update them and then manually edit xf86config? its a geforce2 64 ti on a viewsonic monitor, but i have vesa generic as it runs well this way. i think my earlier problem was in selecting viewsonic and then manually entering horiz. and vert. freq. I now have vesa gen. with the proper config. im hesitant to enable 3d as i dont want a unbootable system. thanks in advance.

2 1

X refreshrates trouble
by H du Plooy 01 Sep '02

01 Sep '02

'lo all, I'm having trouble getting X to go into the proper refreshrates. It's been like this since I've first tried linux, and after lots of reading up I still haven't found an answer. My monitor CAN do: 640x480 @ 100hz 800x600 @ 85hz 1024x768 @ 67hz 1152x864 @ 60hz X will only do: 640x480 @ 100hz (or that's what YAST2 tells me, but it looks more like 70-something) 800x600 @ 70hz 1024@768 @ 60 1152X864 not @ all... At first everything was in 60hz. I noticed that YAST2 detected my monitor's scanrates wrongly, and after fixing that manually, I now had 640x480 @ 70 and the rest at 60hz. Running sax2 lost my 1024x768 completely. Running YAST2 I had to change my monitor to a larger one to fool X. Now I'm getting 70hz in 800x600, but I'm still not getting what I'm supposed to. 800x600 is not supposed to flicker, and right now it's hurting my eyes. 1024x768 is unbearable and 640x480 is really useless in KDE - nothing fits on the screen, and I hate this scrolling desktop idea. I'm still not getting X to go into 1152x864. What do I need to change and where to force X to do the resolutions and refreshrates that I want? I saw this bit in the XF86Config file. Does this relate? How? ---------------------------- Section "Modes" Identifier "Modes[0]" Modeline "640x480" 27.96 640 656 720 864 480 480 485 501 Modeline "800x600" 43.68 800 816 928 1072 600 600 606 626 Modeline "1024x768" 64.25 1024 1088 1264 1320 768 816 824 898 Modeline "1024x768" 71.71 1024 1088 1264 1320 768 816 824 898 EndSection ---------------------------- I was wondering if YAST2 might have misdetected the amount of video memory? It's a 16mb TNT2 and all other distro's I've tried before detects only 1mb or 2mb. Where can I double check this? It doesn't seem to be in the XF86Config file. Thanks Hans == Find businesses and have your business found: http://www.brabys.com

1 0

Are fonts antialiased in Star office 6.0 for linux?
by Max Webb 01 Sep '02

01 Sep '02

Are fonts antialiased in Star office 6.0 for linux? I want to purchase SuSE Linux Pro-Office, and am wondering if it displays antialiased fonts (which 5.2, that came with SuSE Linux 8.0 doesn't do.) Thanks MAX -- Be positive and you will prevail. http://www.tuxgames.com http://www.suse.com http://www.linuxformat.co.uk/ http://www.linuxjournal.com/ Be positive and you will prevail.

2 1

Internet / Netscape problem
by Maura Edelweiss Monville 01 Sep '02

01 Sep '02

I have a dial-up connection with a campus server. I've installed Netscape from SuSE 8.0 kit and use it as mailer and web navigator. Question: -------- Quite often I have to attach and send big files (some MB even after tar + gzip). Unluckily if the transmission is interrupted before the whole file has been sent when I restart "Kinternet" by clicking on the plug applet, I can still see the Netscape window with my big file attached. The percentage of the file that was transmitted is written at the bottom of it. Nevertheless, such a window is dead .. I mean mosst of its menus options are greyed out so insensitive to the mouse. In a few words I cannot resume the transcmission from the point where it was interrupted. Basically I have to restart sending the file from scratch. This is particularly annoying and time-consuming when the transmission gets interrupted many times in a row (almost always !) My questionS to you all is: IS THERE A WAY TO AVOID RESTARTING THE FILE TRANSMISSION FROM THE FIRST BYTE EVERY TIME ? IS A NETSCASPE PROBLEM OR A MODEM INSTALLATION PROBLEM ? DOES SuSE 8.0 HAVE A BETTER INTERNET TOOL TO SEND BIG FILES ? Thank you. Maura

2 1