August 2001 - openSUSE Users - openSUSE Mailing Lists

[FWD: RE: RE: [SLE] ICS]
by kbb0927＠cs.com 28 Aug '01

28 Aug '01

Oops, sent this to myself.

1 0

RE: [SLE] ICS
by kbb0927＠cs.com 28 Aug '01

28 Aug '01

Scott, Before I changed to cable modem access, I was doing exactly that: ICS using SuSE 7.2. Go to www.suse.de/~marc and get SuSEfirewall2-1.6 first. Set up your basic system, hosts, hosts.allow, and intranet IP addresses. Make sure you have iptables installed as SuSEfirewall2 uses it. Then untar it and follow the INSTALL instructions. Then once you configure /etc/rc.config.d/firewall2.rc.config to your particular system/specs, you should be up and running a SuSE ICS with whatever your external port is: ppp, eth, ippp. As a newbie, I did it and compared to Mandrake it was _MUCH_ easier. HTH, Keith B. Scott Parks <sparks(a)magpage.com> wrote: >Morning- > >I have been so impressed with Suse installing it for an ISP I am doing work for >that I am considering blowing away my Mandrake 8 install @ home. This box >replaced my Win@K box that was doing Internet Connection Sharing and failed >miserably. The Mandrake box does not seem entirely stable, if I power down >and then bring it back up to connect and share the Internet connection it >does not work and I have to re-run the Connection Sharing scripts. > >My question, is anyone using Suse for simple Internet Connection Sharing? How >about multilink with ppp? I never got that to work under Mandrake, but one >modem is still faster under Linux than two modems under Win2K. > >This box has one job in life, connect to my ISP and share the connection to >my internal network. Reconnect if the line is dropped. > >Before I dive into the ipchains set-up I want to make sure there is not a >script >like Mandrake that might simplify this. > >Thanks, > >-Scott > > >-- >To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com >For additional commands send e-mail to suse-linux-e-help(a)suse.com >Also check the FAQ at http://www.suse.com/support/faq and the >archives at http://lists.suse.com > >

1 0

Auto installing Ximian Gnome
by Curtis Rey 28 Aug '01

28 Aug '01

Wish me luck, I let the list know how it goes. Cheers, Curtis

5 8

HPT370 binary drivers
by Emilio 28 Aug '01

28 Aug '01

Hi everybody! Last week I've been posting asking for help about setting up the recently released new RAID-drivers for this controller. The basic problem is that HighPoint Tech. decided to release this driver in binary form so I'm going crazy with module dependencies and kernel versions. Actually they've released two modules one for 2.2.18 and another for 2.4.0-4GB kernel and the two kernels built together: the first is quite working but is quite old and USB isn't supported; 2.4.0-4GB (that I obtained thanks to the precious help of Martin Webster) is a mess: all the modules I need that I compiled from the source 2.4.0 tree when modprobed result in an error saying that 'they where compiled for kernel 2.4.0 but I'm using kernel-2.4.0-4GB' (although 'make modules_install' correctly installed them into /lib/modules/2.4.0-4GB/). I tried 'insmod -f' which seems to work but I can't load all modules manually!!! Please help me! But also send a mail to support(a)highpoint-tech.com asking to release drivers in source whether you owe this controller or simply support the Open Source philosophy. -- Emilio Federici emilio.federici(a)libero.it ICQ:27013758

2 1

SuSE 7.2 and fetchmail: error cannot find caninical server
by Frans van Elsacker 28 Aug '01

28 Aug '01

This error message occurs when we do the following steps: 1. ping to the SuSE server results in error: host unknown 2. ping once again results in successfull connection to the SuSE server 3. running fetchmail immediately after a successfull ping results in no errors 4. but sometimes without pinging, fetchmail results in the error 'cannot find canonical server' Thus, we believe that route is OK but that something else is wrong. Does anyone have a tip or solution please ? Many thanks in advance, Frans

2 1

RE: [SLE] Resier FS
by Martin, Guillen 28 Aug '01

28 Aug '01

Can somebody tell me the key points to select reiserfs or ext2? I don't care about what fs to use (at least to now) so I want to know the options that I have. Thaks, Martin. PD: I want to use Oracle so may be is a good moment to say what is the best fs to it. -----Original Message----- From: marsaro(a)interearth.com [mailto:marsaro@interearth.com] Sent: Tuesday, August 28, 2001 11:16 AM To: Martin Webster Cc: Scott Parks; suse-linux-e(a)suse.com Subject: Re: [SLE] Resier FS To be clear, there is a difference in Software RAID vs HW RAID :~) Regards, Jon On Tue, 28 Aug 2001, Martin Webster wrote: > On Tuesday 28 August 2001 1:54 am, Scott Parks wrote: > > Has anyone experimented with using the Reiser file system? I am looking > > to install Suse 7.1 or Suse 7.2 when I get it :) This machine is a > > Netfinity 5500 with a Raid 5 SCSI controller in it. I have 69 gigs > > available. The problem is the file block size. With web files being as > > small as they are I can eat a lot of hard drive space using the default 4K > > blocks with ext2. > > > > I tried to install today with Resier FS for the / partition. I made /boot > > and swap Ext2 as recommenced by the Suse manual. The install froze on > > every attempt. I went back and tried the Suse install using ext2 and > > everything installed normally. Tried again with Reiser, froze. To verify > > it was not just Suse, I tried Mandrake 8 with Reiser, same deal. > > > > Has anyone else experienced this on a similar configuration? > > ** You cannot use ReiserFS with RAID5! ** There are no limitations with > hardware RAID. > > M > > -- > To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com > For additional commands send e-mail to suse-linux-e-help(a)suse.com > Also check the FAQ at http://www.suse.com/support/faq and the > archives at http://lists.suse.com > > -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/support/faq and the archives at http://lists.suse.com

2 1

SV: [SLE] ICS
by Michael Andersson 28 Aug '01

28 Aug '01

Hi! SuSE has done a good job on this one. They use wvdial to run this. I have it running and all I have left is a problem with timeouts on my Windows-boxes on the first connection-attempt. The connection gets done but I have to refresh IE to receive the webpage. I have had no problems with rebooting the ICS-server, it still runs smothly except for that little quirk. The installation is running on a Digital Celebris GL 5133 with 32 Mb of RAM and SuSE 7.1. //Mike -----Ursprungligt meddelande----- Fran: Scott Parks [mailto:sparks@magpage.com] Skickat: den 28 augusti 2001 17:13 Till: suse-linux-e(a)suse.com Amne: [SLE] ICS Morning- I have been so impressed with Suse installing it for an ISP I am doing work for that I am considering blowing away my Mandrake 8 install @ home. This box replaced my Win@K box that was doing Internet Connection Sharing and failed miserably. The Mandrake box does not seem entirely stable, if I power down and then bring it back up to connect and share the Internet connection it does not work and I have to re-run the Connection Sharing scripts. My question, is anyone using Suse for simple Internet Connection Sharing? How about multilink with ppp? I never got that to work under Mandrake, but one modem is still faster under Linux than two modems under Win2K. This box has one job in life, connect to my ISP and share the connection to my internal network. Reconnect if the line is dropped. Before I dive into the ipchains set-up I want to make sure there is not a script like Mandrake that might simplify this. Thanks, -Scott -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/support/faq and the archives at http://lists.suse.com

1 0

RE: [SLE] ifconfig why don't I have the command in bash
by Harrell, Tim 28 Aug '01

28 Aug '01

'ifconfig' is accessible as root. It is in /sbin which is not in a normal users path. Tim Harrell > -----Original Message----- > From: neil briggs [mailto:N.Briggs@canon-europa.com] > Sent: Tuesday, August 28, 2001 3:07 PM > To: suse-linux-e(a)suse.com > Subject: [SLE] ifconfig why don't I have the command in bash > > > Dear List Memebers, > > I am trying to locate my linux systems ip address. I thought > I could use the > ifconfig rth0 command that would return the ip address. The > problem is that > the command is not found on my machine. > > When using my colleagues machine I can use the command no > problem. We are > under the deluded impression that we chose the same options > during the > installation of suse 7.1. > > Any ideas > > regards > Neil Briggs > > -- > To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com > For additional commands send e-mail to > suse-linux-e-help(a)suse.com > Also check the FAQ at http://www.suse.com/support/faq and the > archives at http://lists.suse.com >

1 0

7.2 ODBC to NT MS Access
by David Grove 28 Aug '01

28 Aug '01

Hi guys, At one time in ancient history, I had iODBC installed on a much older version of SuSE. It wasn't too difficult to figure out, though I never had occasion to put it to use. SuSE 7.2 apparently has two different ODBC systems, packages unixODBC and another, which seems to be more of a default, and which clashes with the unixODBC package. What is the other system? I'm guessing that it's a SuSE-specific modification of iODBC... Since I'm unable to define it, I have no idea where to look for its documentation on how to set it up. If there are any recent clues on how to do this easily, whether on the SuSE site or on a website or in a previous thread, I would appreciate any help you can point me to. My eventual goal is to use the OpenLink driver to access a MS Access 95 database running on WinNT 4.0. One other point of confusion is that, at one time, I thought the OpenLink drivers were distributed commercially only, in a group costing around $1500. Recently, I seem to have downloaded the Access drivers for both the NT and the Linux sides of the connection for free. What gives? Have the drivers become free? Dave

1 0

adding boot scripts
by Ray Booysen 28 Aug '01

28 Aug '01

I need to add a script to run on boot. I know how to do it, I just don't know how to put the script into the rcX.d directories. Any help Cheers Ray Booysen

3 2

qpopper and roxen
by Brandon Caudle 28 Aug '01

28 Aug '01

Hi everyone, recently someone installed roxen (web server) and I need it removed ASAP, but I can uninstall the rpm and don't know how to stop it, HELP!!!! And as for qpopper, well while I am at a Microsoft machine and set up my mail servers (qpopper and sendmail) I can send mail but it goes through the pop server not the smtp, but I can't receive mail, if you need any logs or anything just email me Later And Thanks, Brandon Caudle -------------- 15yr Old Avid Unix User (HP-UX,FreeBSD,Linux) Larkhaven Golf Course Charlotte, NC "There cannot be a crisis next week. My schedule is already full." -- Henry Kissinger

3 4

7.2 install woes...more errors than you can shake a stick at
by Richard Booth 28 Aug '01

28 Aug '01

Hi all I installed 7.2 yesterday and it was a nightmare, lots of errors. If anyone can help with one or two from below, please advise or if already answered on the mailing list, how do you search the list? Before I used geocrawler, but now there seems no way of searching. Questions, details follow. Thanks Rich 1. How to use two swap partitions, what is priority 42? 2. Anti-aliased fonts do not seem to work. 3. attempt to access beyond end of device...? 4. Installing packages, many errors - grep broken pipe etc. 5. can't locate char-major-145. 6. Sound pops on startup and shows insmod errors with KDE 2.1.2. 7. USB Logitech Quickcam Express and Miro TV card --- 1. How do you get to use two swap partitions? YaST2 only used one of the two partitions setup, with this entry in /etc/fstab. What does the pri=42 do? /dev/hdb2 swap swap pri=42 0 0 Before I just used defaults. Do I simply add another line like: /dev/hda10 swap swap pri=42 0 0 or /dev/hda10 swap swap defaults 0 0 ? --- 2. Anti-aliased fonts? Should these work with the fonts installed by default with 7.2? Or do I need MS fonts ttf to see any advantage? I have turned them on under KDE CC Style, but there appears no difference. I did notice this message whilst installing Xlib: extension RENDER missing on :0.0 but after install it no longer appears. I am using a Matrox G200. --- 3. I had lots of this message repeated in my log files, anyone know what it means? Aug 27 16:04:30 linux kernel: Directory sread (sector 0x14eff31) failed Aug 27 16:04:30 linux kernel: attempt to access beyond end of device Aug 27 16:04:30 linux kernel: 03:01: rw=0, want=10977177, limit=7341673 It might be tied in to something wrong with the DVD or my DVD drive as I had a few packages that returned an error when installing. Only afterwards did I find an explanation of sorts, it showed the rpms as not found on the DVD, see log for YaST2 below, in the end I manually installed the rpms that were reported as missing?! 2001-08-27 13:35:08 <2> linux(188) [packager] Y2PackagerComponent.cc(doActualWork):118 Package /var/adm/mount/suse/a1/lilo.rpm not found --- 4. Installing packages from YaST1 and 2 reports many errors in the background: grep: writing output: Broken pipe [repeated many times] manpages: fopen: no such file or directory [repeated many times] /sbin/ldconfig: /usr/lib/libexpat.so.1 is not a symbolic link [Should this be a symbolic link, is this just a warning?] --- 5. Every time the pc is started it reports it can not locate char-major-145. What is 145? Do I just add a line in modules.conf to show "off"? --- 6. Sound I am using an ISA AWE 32 sound card that worked fine under SuSE 6.3. 7.2 works fine except for a loud pop when starting the PC and under KDE 2.1.2 I get these insmod errors: insmod: a module named snd-pcm-plugin already exists insmod: insmod: insmod sound-service-0-3 failed --- 7. USB Logitech Quickcam Express and Miro TV card Mandrake 8 detects and uses a module for this camera out of the box. A driver is not available in the SuSE kernel, but I have the driver to insmod it manually, but how do I go about using this driver automatically with kmod, like under Mandrake 8? Also I have a Miro TV card using the BT848 chip, SuSE 7.2 known problems has a configuration page for TV cards but the link does not work: The requested URL /en/sdb/html/cg_wintv.html was not found on this server. Where is this page, or does anyone have the instructions? Many thanks Rich -- Powered by SuSE Linux Richie Rich

2 2

PCMCIA Wireless Card
by Anthony Moulen 28 Aug '01

28 Aug '01

Hello, I have a PCMCIA Wireless Card that works just fine under SuSE 7.2 and runs on my home wireless hub. However, the problem comes in that there are two network devices in my laptop. A built in eth0 intel card, and the PCMCIA wavelan compatible (PrismII) card. I have tried to get SuSE to automatically configure the PCMCIA card on boot but it doesn't work. Right now what I do is after I log in, I 'su' to and type dhcpcd eth1. This is getting old really fast. I didn't have this problem with Mandrake 8.0 (but I had a host of other problems so that isn't an option). When I try to configure the card through the SuSE tools, the card keeps losing its information. It seems the tools have an issue with PCMCIA network cards. Anyone have any ideas before I start manually tearing apart script to shoehorn this puppy into a working state? Thanks, Anthony.

3 6

LOGS
by Brandon Caudle 28 Aug '01

28 Aug '01

Aug 27 19:30:35 linux named[7651]: approved AXFR from [164.128.36.54].52378 for "larkhavengolf.com" Aug 27 19:30:35 linux named[7651]: zone transfer (AXFR) of "larkhavengolf.com" (IN) to [164.128.36.54].52378 Aug 27 19:24:35 linux in.telnetd: usage: telnetd [-debug] [-D (options|report|exercise|netdata|ptydata)] ^I [-h] [-L login_program] [-n] [-u utmp_hostname_length] [-U] [port] Aug 27 19:21:57 linux inetd[21375]: login/tcp (2): bind: Address already in use Aug 27 19:21:57 linux inetd[21375]: smtp/tcp (2): bind: Address already in use Aug 27 19:20:33 linux named[7651]: denied update from [192.168.1.1].1750 for "larkhavengolf.com" Aug 27 19:00:18 linux in.telnetd[21312]: connect from ::ffff:64.192.118.189 (::ffff:64.192.118.189) Aug 27 19:00:18 linux in.telnetd: ::ffff:64.192.118.189 Aug 27 18:59:13 linux popper[21263]: connect from 64.192.118.189 (64.192.118.189) Aug 27 18:32:06 linux popper[20966]: connect from 192.168.1.1 (192.168.1.1) Aug 27 18:32:53 linux popper[20972]: connect from 192.168.1.1 (192.168.1.1) Aug 27 18:32:58 linux kernel: eth0: Too much work at interrupt, IntrStatus=0x0040. Aug 27 17:22:13 linux named[7651]: reloading nameserver Aug 27 17:22:13 linux named[7651]: db_load could not open: localhost.zone: No such file or directory Aug 27 17:22:13 linux named[7651]: db_load could not open: 127.0.0.zone: No such file or directory Aug 27 17:22:13 linux named[7651]: /var/named/ns1.larkhavengolf.com.hosts:5: WARNING: new serial number < old (2001082203 < 2001082702) Aug 27 17:22:13 linux named[7651]: /var/named/ns1.larkhavengolf.com.hosts: WARNING SOA expire value is less than 7 days (432000) Aug 27 17:22:13 linux named[7651]: master zone "larkhavengolf.com" (IN) loaded (serial 2001082203) Aug 27 17:22:13 linux named[7651]: Forwarding source address is [0.0.0.0].33242 Aug 27 17:22:13 linux named[7651]: hint zone "" (IN) loaded (serial 0) Aug 27 17:22:13 linux named[7651]: Ready to answer queries. Anyone know about these logs? Anything to worry about? Thanks Brandon Caudle

3 2

Cron <root@linux> test -x /usr/lib/secchk/security-control.sh && /usr/lib/secchk/security-control.sh weekly &
by Brandon Caudle 28 Aug '01

28 Aug '01

/usr/lib/secchk/checkneverlogin: lastlog: command not found What do I do about this? Brandon Caudle -------------- 15yr Old Avid Unix User (HP-UX,FreeBSD,Linux) Larkhaven Golf Course Charlotte, NC "There cannot be a crisis next week. My schedule is already full." -- Henry Kissinger

3 2

Fwd: Re: Fwd: Re: [SLE] bootproblem
by Jean-Paul Faessen 28 Aug '01

28 Aug '01

---------- Forwarded Message ---------- Subject: Re: Fwd: Re: [SLE] bootproblem Date: Tue, 28 Aug 2001 01:29:09 -0400 From: Tracer Bullet <tracerb(a)sprintmail.com> On Tuesday 28 August 2001 12:09 am, Jean-Paul Faessen, you wrote: > ---------- Forwarded Message ---------- > Subject: Re: [SLE] bootproblem > Date: Mon, 27 Aug 2001 21:08:58 -0400 > From: Tracer Bullet <tracerb(a)sprintmail.com> > >> Jean-Paul, >> Are you running a dual boot system? >> end of line > Tracer > >> No,only Linux with 3 partitions,hda1 (boot),hda2 (swap) and hda3 > (root). Lilo writen to the MBR. > > > Jean-Paul > -------------------- >********************** I asked because one of my customers had installed 7.1 on his Windows machine which worked very well and I upgraded him to 7.2 which caused some problems, didn't boot correctly and other things, so I went thru the install process a second time which cleared things up completely! Still don't know what happened, but he is happily running 7.2 today. I installed on a fresh drive and didn't have a problem at all, so it seems to behave differently on different hardware setups, I believe. Don't know if you have tried that or not, to reinstall over a bad install? What hardware are you running? A lot of built in stuff, like graphics, sound, etc? end of line Tracer ------------------------------------------------------- I use a AMD Athlon 1200 a Elite ECS K7AMA MB 256 MB DDRAM LG DVD Lite-On CDRW Modem and sound are on-board,but deactivated in the BIOS. Instead I use a 3Com 900 Ethernetcard and a Ensonic PCI 128 Soundblaster. I think I misconfigured LILO coz 7.0 is running smoothly here. And yes,I installed 3 times already... I really think the config was wrong. Thanks for taking time. Jean-Paul Faessen

1 0

CRON
by Ray Booysen 28 Aug '01

28 Aug '01

Is there anyone who can help me understand how to use cron to do events at certain times. Thanks Ray Booysen

5 7

routing problems
by Marc Lapage 28 Aug '01

28 Aug '01

Hi ! I have a problem with my Suse7.2 router. I have installed it between 2 existing ethernet networks : a.b.c.64 (netmask :255.255.255.192) and e.f.g.0 (netmask 255.255.255.0). These networks are connected to internet via 2 differents firewalls. My configuration is so : in the router's /etc/rc.config IP_FORWARD="yes" router's /etc/route.conf (= route 's answer ) a.b.c.64 0.0.0.0 255.255.255.192 Eth0 d.e.f.0 0.0.0.0 255.255.255.0 Eth1 127.0.0.0 0.0.0.0 255.255.255.0 Lo Default a.b.c.66 a.b.c.111 's routing table a.b.c.64 0.0.0.0 255.255.255.192 Eth0 127.0.0.0 0.0.0.0 255.255.255.0 Lo Default a.b.c.66(=firewall of abc) e.f.g.48 's routing table has a line a.b.c.0 e.f.g.5 255.255.255.0 a.b.c.66's routing table has a line e.f.g.0 a.b.c.95 255.255.255.0 e.f.g.5 and a.b.c.95 are the IP addresses of the router. My problem is very strange. When I PING a computer in the network e.f.g.0 from a computer in a.b.c.0, I can have quick answers (less than 5ms) as well as slow answers ( about 1second ) whereas I can ping google within 100ms. It is the same problem is the other direction. traceroute always tells me that the packets are going through my router. Has any one an idea of waht is going on ??? _________________________________________________________ Le journal des abonnés Caramail - http://www.carazine.com

1 0

RE: [SLE] LOGS
by jostber 28 Aug '01

28 Aug '01

Maybe you could forward it to the suse-security(a)suse.com list? It is focused on network issues. Regards, Jostein >===== Original Message From "Brandon Caudle" <bcaudle(a)hotmail.com> ===== >Aug 27 19:30:35 linux named[7651]: approved AXFR from [164.128.36.54].52378 >for "larkhavengolf.com" >Aug 27 19:30:35 linux named[7651]: zone transfer (AXFR) of >"larkhavengolf.com" (IN) to [164.128.36.54].52378 >Aug 27 19:24:35 linux in.telnetd: usage: telnetd [-debug] [-D >(options|report|exercise|netdata|ptydata)] ^I [-h] [-L login_program] [-n] >[-u utmp_hostname_length] [-U] [port] >Aug 27 19:21:57 linux inetd[21375]: login/tcp (2): bind: Address already in >use >Aug 27 19:21:57 linux inetd[21375]: smtp/tcp (2): bind: Address already in >use >Aug 27 19:20:33 linux named[7651]: denied update from [192.168.1.1].1750 for >"larkhavengolf.com" >Aug 27 19:00:18 linux in.telnetd[21312]: connect from ::ffff:64.192.118.189 >(::ffff:64.192.118.189) >Aug 27 19:00:18 linux in.telnetd: ::ffff:64.192.118.189 >Aug 27 18:59:13 linux popper[21263]: connect from 64.192.118.189 >(64.192.118.189) >Aug 27 18:32:06 linux popper[20966]: connect from 192.168.1.1 (192.168.1.1) >Aug 27 18:32:53 linux popper[20972]: connect from 192.168.1.1 (192.168.1.1) >Aug 27 18:32:58 linux kernel: eth0: Too much work at interrupt, >IntrStatus=0x0040. >Aug 27 17:22:13 linux named[7651]: reloading nameserver >Aug 27 17:22:13 linux named[7651]: db_load could not open: localhost.zone: >No such file or directory >Aug 27 17:22:13 linux named[7651]: db_load could not open: 127.0.0.zone: No >such file or directory >Aug 27 17:22:13 linux named[7651]: /var/named/ns1.larkhavengolf.com.hosts:5: >WARNING: new serial number < old (2001082203 < 2001082702) >Aug 27 17:22:13 linux named[7651]: /var/named/ns1.larkhavengolf.com.hosts: >WARNING SOA expire value is less than 7 days (432000) >Aug 27 17:22:13 linux named[7651]: master zone "larkhavengolf.com" (IN) >loaded (serial 2001082203) >Aug 27 17:22:13 linux named[7651]: Forwarding source address is >[0.0.0.0].33242 >Aug 27 17:22:13 linux named[7651]: hint zone "" (IN) loaded (serial 0) >Aug 27 17:22:13 linux named[7651]: Ready to answer queries. > >Anyone know about these logs? >Anything to worry about? > >Thanks > >Brandon Caudle > >-- >To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com >For additional commands send e-mail to suse-linux-e-help(a)suse.com >Also check the FAQ at http://www.suse.com/support/faq and the >archives at http://lists.suse.com

1 0

PCMCIA Network card
by Ricardo Rodriguez 28 Aug '01

28 Aug '01

Im about to go out to buy a pcmcia network card that I can just plug into my laptop running 7.1 and woks. What should I get? ===== Ricardo A. Rodriguez __________________________________________________ Do You Yahoo!? Make international calls for as low as $.04/minute with Yahoo! Messenger http://phonecard.yahoo.com/

4 3

Kernel error
by LOLO 28 Aug '01

28 Aug '01

Hello, I have a problem, an error appear many times in = /var/log/messages, the error is=20 Aug 28 09:51:19 kernel: ewrk3_queue_pkt(): No free resources... Aug 28 09:51:19 kernel: ewrk3_queue_pkt(): CSR: 21 ICR: 80 FMQC: = 00 When some times pass the server don't respond and I have to reboot.=20 Can anybody help me? Thank you very much

1 0

RE: [SLE] Error kernel
by jostber 28 Aug '01

28 Aug '01

Hi, Seems to be a problem with your DEC network card. Do you use the right driver and which kernel? Regards, Jostein >===== Original Message From "Silvia Nieto Santos" <snieto(a)sc.sas.cica.es> ===== > Hello, I have a problem, an error appear many times in /var/log/messages, the error is > > Aug 28 09:51:19 kernel: ewrk3_queue_pkt(): No free resources... > Aug 28 09:51:19 kernel: ewrk3_queue_pkt(): CSR: 21 ICR: 80 FMQC: 00 > > When some times pass the server don't respond and I have to reboot. > > Can anybody help me? > > Thank you very much

1 0

graphic card SIS 630 & SUSE Support
by Luz Futten 28 Aug '01

28 Aug '01

Hello all, just to let you know that some days ago, I sent a message asking for help for a portable and a graphic card that is not recognized on this list. Thank you all for your help! About 4 weeks ago i sent the 1st message asking for help to SUSE support. I didnt received anything and I accidentaly deleted the ticket number, so I could not claim for it, and didn't insist on it. The 17/Aug/01, I sent another one. From this 2nd one, I received an answer the 23/Aug/01, with instructions on how to fix the problem of the graphic card by using framebuffer, etc. I think that 7 days is a nice average tech support. They didnt answered everything because I had many questions, but I'm quite happy. Also to thank SUSE by sending me the lovely stickers they have when buying from their web! They haven't paid me for saying this! As I was not lucky to convince the other people in my company by convincing one of our most important clients past 16/Aug/01, I'll have another chance in October.. Wish me your bests by then! If someone is interested, I'll post after weekend, if I was able to fix it or not, and how I did it, if so. Luz Futten (Fuengirola - Malaga - Spain)

4 4

Problem with bookmarks in Mozilla (7.2)
by der T e x t 28 Aug '01

28 Aug '01

hi folks, using suse 7.2 with gnome-desktop. Mozilla freezes on trying to bookmark anything. Every time. Any clues ? greetings dan

1 0

Error kernel
by Silvia Nieto Santos 28 Aug '01

28 Aug '01

Hello, I have a problem, an error appear many times in /var/log/messages, the error is Aug 28 09:51:19 kernel: ewrk3_queue_pkt(): No free resources... Aug 28 09:51:19 kernel: ewrk3_queue_pkt(): CSR: 21 ICR: 80 FMQC: 00 When some times pass the server don't respond and I have to reboot. Can anybody help me? Thank you very much

1 0