December 2023 - openSUSE Users - openSUSE Mailing Lists

Screen blanks while watching video. Leap 15.5 KDE
by James Knott 21 Dec '23

21 Dec '23

I installed 15.5 a couple of weeks ago and one annoyance is the screen will blank after a few minutes while watching a video, unless I move the mouse or press a key occasionally. Is there any way to stop that behaviour, while a video is playing? tnx jk

8 35

How can openSUSE udev rule for /dev/ttyACM0 impact communication with the device?
by David C. Rankin 21 Dec '23

21 Dec '23

All, This is way in the weeds of a udev question -- something I know little about, but I've pulled my hair out trying to find out why when connected to openSUSE the device simply doesn't provide I/O responses from the Pico after high-activity on the Pico? Simply rebooting into windows, same Pico, same USB same everything -- all works. Unplug the Pico, carry 8-foot to Arch box, plug-in, everything works, reboot openSUSE, carry Pico back from Arch box, plug into same USB as before and no output after high-activity on the Pico on openSUSE. The card isn't locked, simply pressing Enter restores shell prompt, so it is just something happening on the USB port that is preventing *some* I/O from coming through. minicom, picocom, tip, doesn't matter. 9600 baud or 115200 baud, doesn't matter, there is just something about how /dev/ttyACM0 is configured or accessed on openSUSE that is causing the issue. stty settings are exactly the same between Arch and openSUSE. When hooked to the Arch box, access is from openSUSE via ssh using the same terminal. Peering through udevadm info output there are subtle difference in how the udev rule sets up the device which has me wondering if those small differences in setup is what is responsible for the behavior I see. I don't know enough about it to know so I need help. The Archlinux udevadmin info output for /dev/ttyACM0 is at: https://paste.opensuse.org/bb73cdfe5dd7 The openSUSE udevadmin info output for /dev/ttyACM0 is at: https://paste.opensuse.org/2c4d323524ee The only things that stand out are the openSUSE configures "kids" info for the device while Arch has no "kids" and there are difference in some settings, these being some that were noted, e.g. Arch: ATTRS{manufacturer}=="Raspberry Pi" ... (power/async not set) ATTRS{power/control}=="on" ATTRS{power/level}=="on" ... ATTRS{power/runtime_status}=="active" ATTRS{power/runtime_suspended_time}=="0" ... ATTRS{quirks}=="0x0" ATTRS{removable}=="unknown" ATTRS{remove}=="(not readable)" ATTRS{rx_lanes}=="1" ATTRS{serial}=="E6612483CB6D7F25" ATTRS{speed}=="12" ATTRS{tx_lanes}=="1" ATTRS{urbnum}=="250" ATTRS{version}==" 1.10" looking at parent device '/devices/pci0000:00/0000:00:1d.3': ... ATTRS{consistent_dma_mask_bits}=="32" ATTRS{d3cold_allowed}=="0" ATTRS{device}=="0x27cb" ATTRS{dma_mask_bits}=="32" openSUSE: ATTRS{manufacturer}=="Raspberry Pi" ... ATTRS{power/async}=="enabled" ATTRS{power/control}=="auto" ATTRS{power/level}=="auto" ... ATTRS{power/runtime_status}=="suspended" ATTRS{power/runtime_suspended_time}=="75332" ... ATTRS{product}=="Picoprobe" ATTRS{quirks}=="0x0" ATTRS{removable}=="unknown" ATTRS{rx_lanes}=="1" ATTRS{serial}=="E6612483CB6D7F25" ATTRS{speed}=="12" ATTRS{tx_lanes}=="1" ATTRS{urbnum}=="273" ATTRS{version}==" 1.10" looking at parent device '/devices/pci0000:00/0000:00:1c.7/0000:26:00.0': ... ATTRS{consistent_dma_mask_bits}=="64" ATTRS{current_link_speed}=="5.0 GT/s PCIe" ATTRS{current_link_width}=="1" ATTRS{d3cold_allowed}=="1" ATTRS{device}=="0x0194" ATTRS{dma_mask_bits}=="64" But admittedly, those settings do not mean much to me. Can anyone think of any difference in udev that may explain the I/O with the pico not all being there on openSUSE, but being 100% fine when rebooting to windows, or when plugging the connection into any other box I have? Having eliminated everything else I can think of and having tested the same Pico on the same USB port on my laptop and then having tested plugged into any other box, there is something different about the /dev/ttyACM0 device when it is connected to openSUSE - but I can't quite figure out what. All help, ideas, welcomed. This was uncovered as part of an issue being worked on github, though not 100% related to the port, it contains all the elimination of other possibilities of what it could be (for any interested reader): https://github.com/carlk3/no-OS-FatFS-SD-SPI-RPi-Pico/issues/91 -- David C. Rankin, J.D.,P.E.

4 9

Extra NTP server address
by James Knott 20 Dec '23

20 Dec '23

I run my own NTP server, which can be reached with both IPv4 and IPv6. However, when I check with Wireshark, I see NTP requests going not only to my server, but also to an IPv4 address on the Internet. This happens with both my desktop system and ThinkPad, but they have different external addresses, in addition to my server. I use the host name for the server address in NTP Configuration. Any idea where that other address comes from?

6 21

Can't install grub customizer
by James Knott 19 Dec '23

19 Dec '23

I'm trying to install grub customizer on my ThinkPad, but get this error: An error occurred while initializing the software repository. Details: https-download.opensuse.org-7042a4d4: [https-download.opensuse.org-7042a4d4|https://download.opensuse.org/repositories/SUSE:/SLE-15-SP1:/GA/pool/] Valid metadata not found at specified URL History: - [https-download.opensuse.org-7042a4d4|https://download.opensuse.org/repositories/SUSE:/SLE-15-SP1:/GA/pool/] Repository type can't be determined. Problem with the repository? This is where I downloaded it from. https://software.opensuse.org/download/package?package=grub-customizer&proj… tnx jk

2 2

The Green Eyed Monster Drives Companies To Back Away From Open-Source -- sad.
by David C. Rankin 19 Dec '23

19 Dec '23

Thanks Peter, https://www.theregister.com/2023/12/18/suse_captain_container/ Not... -- David C. Rankin, J.D.,P.E.

1 0

zypper update shows locked files
by Frank McCormick 19 Dec '23

19 Dec '23

Did my usual zypper dup this morning and for the first time saw this message about locked files. The following 2 items are locked and will not be changed by any action: Installed: patterns-base-basesystem patterns-base-x11 Nothing to do. frank@desktop-tumbleweed:~> I assume this means if there are updates to those files they won't be sucessful. How do I change this ? Thanks

2 2

docker nginx puzzle
by Michael Fischer 18 Dec '23

18 Dec '23

Hi. Following https://www.docker.com/blog/how-to-use-the-official-nginx-docker-image/ $ docker pull nginx $ docker run -it --rm -d -p 8080:80 --name web nginx $ curl localhost:8080/ # or open in a browser Works fine on an ubuntu host I have in ec2, but on my Leap 15.2 desktop, connections just hang. $ docker ps -a CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES c3ee28da64bc nginx "/docker-entrypoint.…" 6 minutes ago Up 6 minutes 0.0.0.0:8080->80/tcp, :::8080->80/tcp web $ sudo ss -natup | grep 8080 tcp LISTEN 0 128 0.0.0.0:8080 0.0.0.0:* users:(("docker-proxy",pid=25317,fd=4)) tcp LISTEN 0 128 [::]:8080 [::]:* users:(("docker-proxy",pid=25323,fd=4)) $ curl -vvv 127.0.0.1:8080/ * Trying 127.0.0.1:8080... * TCP_NODELAY set * Connected to 127.0.0.1 (127.0.0.1) port 8080 (#0) > GET / HTTP/1.1 > Host: 127.0.0.1:8080 > User-Agent: curl/7.66.0 > Accept: */* > ^C What am I overlooking? TIA Michael -- Michael Fischer michael(a)visv.net

1 0

Will openSUSE fork ISC DHCP on Github and maintain it?
by renmingshuai 18 Dec '23

18 Dec '23

Hi! As far as I know, OpenSUSE has forked some software packages that are no longer maintained by upstream on GitHub and maintains them by yourselves, such as xinetd (https://github.com/openSUSE/xinetd) ISC DHCP has announced the end of its life in 2022 (https://www.isc.org/blogs/isc-dhcp-eol/) Is openSUSE going to fork it (https://github.com/isc-projects/dhcp) and maintain it in the future? Regards,

1 0

how does file encrypt work?
by Daniel Bauer 17 Dec '23

17 Dec '23

For you maybe a strange question, but I don't understand... I want to encrypt a folder so that it can only be opened using a password. I use dolphin (in KDE) right click on a folder and chose actions->pack and encrypt folder ("Ordner packen und verschlüsseln) In the following dialog I deselect "encrypt for others" and select "encrypt with Password", enter the password, click ok. A "foldername.tar.pgp" is created. It is encrypted. Then I right-click that file, select actions->decrypt and the decrypted folder is created immediately without asking me the password. So what's the use of this encryption when it can be decrypted without the password??? How do I encrypt a folder so that it actually can only be decrypted using a password? Thanks for clarification! Daniel -- Daniel Bauer photographer Basel Málaga Twitter: @Marsfotografo (often explicit nudes) https://www.patreon.com/danielbauer https://www.daniel-bauer.com (nudes)

12 21

Fwd: Blacklisted file systems update
by Carlos E. R. 16 Dec '23

16 Dec '23

I think this should be interesting to all -------- Forwarded Message -------- Subject: Blacklisted file systems update Date: Fri, 15 Dec 2023 20:07:26 +0100 From: Martin Wilck via openSUSE Factory <factory(a)lists.opensuse.org> Reply-To: Martin Wilck <mwilck(a)suse.com> To: factory <factory(a)lists.opensuse.org> Many of you will be aware of the fact that some file systems are blacklisted by default on openSUSE. With the forthcoming update of suse-module-tools, the list of disabled file systems will grow: f2fs, hfsplus, jfss2, kafs, ntfs3, orangefs, pstore, romfs, and zonefs will then be blacklisted, too. This means that the respective kernel modules will not be auto-loaded, and that the system won't be able to access media with such file systems immediately when they are inserted. To override this, run "sudo modprobe $FS_MODULE" in a terminal. You will have the option to load the module just once, or un-blacklist it for future use. I've created https://en.opensuse.org/SDB:FilesystemBlacklisting with more details and a rationale. Regards Martin

1 0