May 2019 - openSUSE Users - openSUSE Mailing Lists

Sorry SuSE: 9.1 is Waste of time and money!
by Terje J. Hanssen 17 May '24

17 May '24

I am sorry to conclude that my upgrade from SuSE 9.0 Pro to 9.1 Pro has been waste of time and money for me, so far. The same I have to say about the free SuSE "Installation support". The reason is that my SuSE 9.1 installation only detects 1 of my 3 SCSCI devices (as I wrote in another subject on this forum: http://lists.suse.com/archive/suse-linux-e/2004-May/3254.html) Yamaha 4416S CDRW recorder detected HP DVD Writer 100i NOT detected Epson 1640SU scanner NOT detected It's rather stupid. I have installed 9.1 using the DVD disk just in the HP DVD drive, but after the installation of 9.1, the KDE/Konqueror /media/recorder cannot access it and YaST2 cannot install additional software from it. Only one "Cdrecorder" is found in My computer and that is the Yamaha 4416 drive, which the KDE/Konqueror file manager assign as /media/recorder11. I am sure 9.1 is the reason, as I hadn't this problems with 9.0. I have tried both an update and two several new installation of 9.1. Neither SJDS nor Windows on the same multiboot PC have problems to detect these devices. In my opinion SuSE should therefore debug 9.1 better and longer, and not leave the problems to the customers. I see SuSE notes on their web saying that they know SCSI scanners are not detected in 9.1. But regarding my HP DVD writer problem, the SuSE support (as usual) don't take the responsibility and argue that this problem (a combination of IDE disk and SCSI devices) isn't included in their free installation support! This sounds remarkable, and I have never had a modern PC of so simple model or configuration that it has fitted the limited rules for the free installation support. Terje J. Hanssen

17 29

[opensuse] Project management software question for project managers
by Ted Byers 15 Apr '24

15 Apr '24

I am looking for project management software I can install on my Suse box. Alas, there are quite a number of prducts that claim to be suitable project management products, but I am hoping to obtain a little help separating the wheat from the chaffe. Basically, when I open the project management software, I want to be able to choose from among a number of projects that are under way, and then see the relation between a client's wish list and the functional requirements specs, and then how these specs relate to the UML diagrams that have been created, and from there, what tasks have been defined for each requirement and the identity of all persons involved, the developers and their managers, and the person who designed the code that supports the requirement. And with that, I want to be able to see the project's timeline, the related bugs, &c. I would even want to be able to open the source code files and examine the code that was actually written. Here is my wish list: 1) a web application that stores data in either PostgreSQL or MySQL. 2) easy integration with UML tool (or has it's own UML tool that supports round trip engineering) 3) resource management (e.g. computers, and development tools, that can be used, personelle assigned to each task) 4) documentation of relation between functional requirements specs to specific tasks and specific unit and integration tests. 5) time/effort tracking 6) bug tracking, including data relating the existance of the bug, and effort required to fix it, to the person who wrote the original code, the person who supervised him or her, and the person who designed the 'feature' in question, the time taken to complete the original task, and the technologies used (to imprrove accountability as well as to determine retraining and continuing education needs (people aren't disposable, so instead of taking a harsh aproach to problems identified, I prefer to use education as a corrective, but I can't design corrective instruction without knowing precisely what the need is). I also need to know if a developer has a higher than normal bug rate simply because he doesn't take enough time to ensure the job is done right, or because I haven't adequately trained him, or because of a poor choice of tools, or somethng else that may be my fault. 7) use of task effort tracking history to generate provisional effort/cost estimates from new project's functional requirements 8) easy integration with open source ERP products like OFBiz (which may make trakcing resources and manpower easier, as well as connect real production data to the enterprise's accounting systems) 9) easy integration with CMS products, like Wordpress (especally for production documentation, includng degin documentation and user guides and reference manuals) 10) easy integration with verion control systems such as subversion. If there is a decent product that supports all of this, great (and language used to implement it doesn't matter), but if I have to write code to add missing requirements, then I am limited to those implemented using Perl or Java (and running on Tomcat). I don't know PHP well enough, and I don't know Ruby at all; and I really don't want to think about implementing this sort of thing in C++ (though I could if absolutely necessary). If you have project management experience, and use tools that are available for Suse Linux, what software product(s) did you use, and with what result? While I await relies, I will continue to review web documentation for those products I have found so far, to see if any of them are a) suitable for use in production and b) to see to what extent they support the features I am after. I have seen a number of products so far in my search, that deserve to be nameless, because they provide no way to relate cost estimates to one's team's track record, or to the details of the design, and seem satisfied with production of a pretty gantt chart (which is why I have formed the view that there is a whole lots of chaffe in the set of applications that call themselves project menement software - I have yet to find anything that really has the potential of being labelled wheat). Thanks Ted -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 4

[SLE] RealPlayer G2 on SuSe 6.2
by yh＠ottawa.com 03 Apr '24

03 Apr '24

Yesterday, I finally got sound going on my Linux setup. I downloaded RealPlayer G2 and it worked beautifully. Today, RealPlayer run but no sound coming out. All other sound functions still work. I can still play my CD, have system sound BUT no sound when I run RealPlayer. /var/log/message said kernel: Sound: DMA (output) timed out - IRQ/DRQ config error? but KDE sound still work. I have re-installed RealPlayer 3 times now, still no sound when I run the RealPlayer. Any help is appreciated. Ying yh(a)ottawa.com -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

3 2

Creating a new user for a deamon
by Rowan Reid 15 Jan '24

15 Jan '24

I'm setting up a cron job for a analysis tool, I'm trying to use the SuSE tools where possible but YAST doent' allow you to create new user without a home I tried /dev/null is there a proper way to do this ? Rowan Reid Job Captain, Systems Administrator STUDIO 3 ARCHITECTS 909 982 1717

3 2

[opensuse] Kernel compilation the openSUSE way?
by Bjoern Voigt 28 Nov '21

28 Nov '21

I usually take the newest openSUSE kernel (from repository Kernel_stable). But since some month I have a DVB T2 HD card, which requires a patch (see https://bugzilla.kernel.org/show_bug.cgi?id=194171). So I need to compile kernels myself. I have a working compilation path. But the current path has 12 steps! It takes some time. I wonder, why it is so complicated to configure, compile and install a Kernel under openSUSE. Is there a better/easier/automated way to configure, compile and install a Kernel under openSUSE? I know this blog article. But the article uses Vanilla kernels and also needs 6 steps. With additional patches (4 steps), third-party modules (2 steps) and cleanup (1 step) the article would also need 13 steps: Compiling the Linux Kernel, the SUSE way https://www.suse.com/communities/blog/compiling-de-linux-kernel-suse-way/ This is my Kernel configuration, compilation and installation path: 1. Update kernel-source and kernel-default from Kernel_stable repository 2. Save kernel-source: cp -a /usr/src/linux-4.x.y-... /usr/src/linux-4.x.y-my 3. Apply my patches cd /usr/src/linux-4.x.y-my patch -b -p1 < ~myuser/.../my-kernel-patch.patch 4. Copy standard configuration: cd /usr/src/linux-4.x.y-my cp -v /boot/config-4.11.4-1.gcba98ee-default .config 5. Edit .config: remove CONFIG_LOCALVERSION, CONFIG_DEBUG_KERNEL, CONFIG_EXPERT remove some hardware-dependent settings 6. edit configuration interactively: Disable CONFIG_EXPERT and CONFIG_DEBUG_KERNEL, because otherwise "make binrpm-pkg" creates huge kernel binaries. make oldconfig [...] Local version - append to kernel release (LOCALVERSION) [] (NEW) -my1 * * Configure standard kernel features (expert users) * Configure standard kernel features (expert users) (EXPERT) [N/y/?] (NEW) Kernel debugging (DEBUG_KERNEL) [N/y/?] (NEW) make menuconfig Do some additional configuration. 7. Compile kernel (-j4 for four processor cores, ionice and nice to reduce the load, binrpm-pkg for RPM without source-RPM) make clean nice ionice -c idle make -j4 binrpm-pkg 8. Install the kernel RPM package rpm -Uvh /usr/src/packages/RPMS/x86_64/kernel-4.x.y_my1-....x86_64.rpm 9. Install necessary symbolic links for "dkms" cd /lib/modules/4.x.y-my1 ln -sv /usr/src/linux-4.x.y-my source ln -sv /usr/src/linux-4.x.y-my build 10. Update third-party modules (e.g. Nvidia driver): dkms install -m nvidia -v 375.66 -k 4.x.y-my1 11. Cleanup cd /usr/src/linux-4.x.y-my make clean 12. Select Grub configuration and reboot grub2-once --list | less grub2-once 2 reboot Greetings, Björn -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 13

Web Site Standards
by Bryan Tyson 25 Sep '21

25 Sep '21

On Wednesday 03 July 2002 03:38, Michael wrote: > I tried to visit this site. > http://www.bet365.com > The result upset me so much i sent them this. I sent the letter below, and I encourage everyone on the list to send a similar letter. ----------------------------------------- Subject: Create a Real Web Site Please From: Bryan S. Tyson <bryantyson(a)earthlink.net> To: webmaster(a)bet365.com When attempting to view your site using Konqueror 2.2.1 and Mozilla 0.9.4, both Linux web browsers, I was curtly informed that my browser is "incompatible." Your site, sir, is what is "incompatible." Stick with established standards and real html, not Microsoft proprietary "features." *************************************************** Powered by SuSE Linux 7.3 Professional KDE 2.2.1 KMail 1.3.1 This is a Microsoft-free computer Bryan S. Tyson bryantyson(a)earthlink.net ***************************************************

10 9

Mount Windows NT(NTFS) drive as drive Z: for all users
by Keith Jacobs 25 Sep '21

25 Sep '21

We have an winNT server and need to auto mount a shared folder as if it were a windose mapped drive Z: on SuSE8 Could someone please explain how to do this and how to make sure it is set-up for every user everytime the system is booted. Thanks Regards Keith Jacobs New to Linux

3 2

[opensuse] libc segfaults attaching an iPad
by Dave Howorth 26 Mar '21

26 Mar '21

I just tried to attach an iPad to my openSUSE 15.0 system, via USB. I think I've done it before, but this time it fails. Dmesg has: [9787970.148053] usb 3-9: new high-speed USB device number 96 using xhci_hcd [9787970.302089] usb 3-9: New USB device found, idVendor=05ac, idProduct=12a2 [9787970.302091] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [9787970.302092] usb 3-9: Product: iPad [9787970.302093] usb 3-9: Manufacturer: Apple Inc. [9787970.302094] usb 3-9: SerialNumber: c4088xxxxxserialxredacted [9787971.044264] ipheth 3-9:4.2: Apple iPhone USB Ethernet device attached [9787991.101146] pool[16789]: segfault at 0 ip 00007f6ada593ef1 sp 00007f6ad6203bd8 error 4 in libc-2.26.so[7f6ada43a000+1b1000] Anybody have any idea what the problem is? Thanks, Dave -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 7

[opensuse] Raid, Raid6, what file system for good fault tolerance?
by cagsm 21 Dec '20

21 Dec '20

Hi list, speaking about software raid, not hardware controller based. I am trying to go for some local OpenSuse machine and adding some storage to it. Was considering Raid6, and now reading about a bit and people left and right scaremongering about the larger the disks these days in the double digit terabyte capacities even, the more likely it is that during a reconstruction of a raid subsequent errors would occur. I would absolutely like to keep my data consistent, and I am not thinking about double digit terabytes either, would stick to 2TB or 4TB disks, with Raid6 thats at least 4 physical drives. Now I am wondering if it possible to use a good robust file system that can add some more parity or check blocks or redundancy on top of the hardware disks, to absolutely be able to always read my data. I can't add multiple machines or like those high availability stuff like clusters and what not I read about DRBD (Distributed Replicated Block Device), or maybe I am just too scared by those technical terms or consider myself to be just a simpleton and wanting to keep it rather simple. My use case here is also not constant availablity, when a disk needs to be replaced, so be it, but I don't want to lose my data that I can not ever read certain parts of it again or such stuff. The thing that came to my mind was, if there is some file systems that would add redundancy and robustness onto the mdraid system of the linux kernel? Anyone with some useful insights? Roughly speaking, I was considering some simple pcie esata interfaced controller card and an external case enclosure with esata port and portmulitplier stuff inside, that can present at least 4 physical disks as JBOD, just a bunch of disks, so that the Linux can seem them all separately. Speed and rebuild times are not my concern, but data persistence and data integrity. Not even number of physical disks, I could live with even one of those 8 bay device enclosures and cases that are out there on the market. Thanks for any help and hints. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 23

[opensuse] Issue with smartd
by Carlos E. R. 21 Oct '20

21 Oct '20

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I have one disk that is giving me problems with the smartd daemon. I get this in the log: <3.6> 2018-10-21T13:45:23.829155+02:00 Isengard smartd 1173 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], state written to /var/lib/smartmontools/smartd.WDC_WD80EZAZ_11TDBA0-2TKST2SD.ata.state <3.6> 2018-10-21T13:45:24.483719+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], opened <3.6> 2018-10-21T13:45:24.484570+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], WDC WD80EZAZ-11TDBA0, S/N:2TKST2SD, WWN:5-000cca-26af51579, FW:83.H0A83, 8.00 TB <3.6> 2018-10-21T13:45:24.503334+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], not found in smartd database. <3.6> 2018-10-21T13:45:24.525071+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], enabled SMART Attribute Autosave. <3.6> 2018-10-21T13:45:24.530486+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], enabled SMART Automatic Offline Testing. <3.6> 2018-10-21T13:45:24.535003+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], is SMART capable. Adding to "monitor" list. <3.6> 2018-10-21T13:45:24.535627+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], state read from /var/lib/smartmontools/smartd.WDC_WD80EZAZ_11TDBA0-2TKST2SD.ata.state <3.6> 2018-10-21T13:45:24.880219+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], state written to /var/lib/smartmontools/smartd.WDC_WD80EZAZ_11TDBA0-2TKST2SD.ata.state <3.6> 2018-10-21T14:15:25.233525+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 147 to 144 <3.6> 2018-10-21T15:45:31.681938+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], not capable of SMART self-check <3.2> 2018-10-21T15:45:33.632399+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], failed to read SMART Attribute Data <3.6> 2018-10-21T16:15:24.678100+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], read SMART Attribute Data worked again, warning condition reset after 1 email <3.6> 2018-10-21T18:15:31.767150+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], not capable of SMART self-check <3.2> 2018-10-21T18:15:33.717688+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], failed to read SMART Attribute Data <3.6> 2018-10-21T18:45:24.587304+02:00 Isengard smartd 11255 - - Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], read SMART Attribute Data worked again, warning condition reset after 1 email It intermitently but periodically fail to read atributes, triggering hundreds of emails sent to me to warn of the problem: +++------------ Subject: SMART error (FailedReadSmartData) detected on host: Isengard This message was generated by the smartd daemon running on: host name: Isengard DNS domain: valinor The following warning/error was logged by the smartd daemon: Device: /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 [SAT], failed to read SMART Attribute Data Device info: WDC WD80EZAZ-11TDBA0, S/N:2TKST2SD, WWN:5-000cca-26af51579, FW:83.H0A83, 8.00 TB For details see host's SYSLOG. You can also use the smartctl utility for further investigation. Another message will be sent in 24 hours if the problem persists. - ------------++- The disk is indeed smart capable and it works fine, as long as I call smartctl with "-d sat,16", which I do: Isengard:~ # smartctl --test=short -d sat,16 /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0\:0 smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.4.155-68-default] (SUSE RPM) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === Sending command: "Execute SMART Short self-test routine immediately in off-line mode". Drive command "Execute SMART Short self-test routine immediately in off-line mode" successful. Testing has begun. Please wait 2 minutes for test to complete. Test will complete after Sun Oct 21 13:50:18 2018 Use smartctl -X to abort test. Isengard:~ # Isengard:~ # smartctl --health -d sat,16 /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0\:0 smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.4.155-68-default] (SUSE RPM) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED Isengard:~ # It is crucial to use "-d sat,16" or it fails: Isengard:~ # smartctl --health /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0\:0 smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.4.155-68-default] (SUSE RPM) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0: Unknown USB bridge [0x1058:0x25ee (0x4004)] Please specify device type with the -d option. Use smartctl -h to get a usage summary Isengard:~ # Of course I use that option on the config: Isengard:~ # cat /etc/smartd.conf | egrep -v "^[[:space:]]*$|^#" /dev/sda -a -o on -S on -s (S/../.././02|L/../../6/03) -m root(a)telcontar.valinor /dev/disk/by-id/wwn-0x5000000000000001 -a -o on -S on -s (S/../.././02|L/../../6/03) -m root(a)telcontar.valinor /dev/disk/by-id/wwn-0x5000c5009399305f -a -o on -S on -s (S/../.././02|L/../../6/03) -m root(a)telcontar.valinor /dev/disk/by-id/usb-WD_My_Book_25EE_32544B5354325344-0:0 -d sat,16 -a -o on -S on -s (S/../.././02|L/../../6/03) -m root(a)telcontar.valinor Isengard:~ # What else am I missing? Is smartd not using "-d sat,16" somewhere else? Is it some other problem? Isengard:~ # rpm -q smartmontools smartmontools-6.6-135.1.x86_64 Isengard:~ # - -- Cheers Carlos E. R. (from 42.3 x86_64 "Malachite" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAlvM5UMACgkQtTMYHG2NR9WCwQCePjOt8PSMKsx6DwSe9bZJRhHf 2lQAn02eBTrtfAqmEg5ydZVagvMfW2r6 =eIzR -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 7

[opensuse] oS 13.1 : "gnome keyring socket is not owned with the same credentials as the user"
by ellanios82 11 Aug '19

11 Aug '19

Hello List am using Xfce : - in /var/log/warn : i see warning " The gnome keyring socket is not owned with the same credentials as the user login: /run/user/1000/keyring-4i77r7/control 2013-11-27T13:27:17.434100+02:00 su: gkr-pam: couldn't unlock the login keyring " ............... - any ideas how to fix ? thanks -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Leap + Tumbleweed + boot partition
by Stephen Berman 06 Jul '19

06 Jul '19

I bought a computer with Leap 15.0 preinstalled on an SSD, and I also wanted to install Tumbleweed on the disk. For reasons detailed below, I did this without installing a bootloader for Tumbleweed, but since Tumbleweed is frequently updated, including grub2, I think it would be better to install the bootloader in Tumbleweed. Due to my lack of knowledge, I would be grateful for advice on how to do that safely. Some specifics follow about the disk and what I did to install Tumbleweed. The SSD had three partitions: /boot, / (root) and swap. I shrank the root partition (formatted as ext4) and added a btrfs partition for Tumbleweed. I first left /boot and swap as is, but the Tumbleweed installer said there was no bootable partition (I don't remember the exact wording, something like no BIOS boot table). I then tried deleting the /boot partition and adding it again, selecting "BIOS Boot" as the partition ID, but the installer still said there was no bootable partition. I also tried different file systems to format /boot -- originally it was FAT and I also tried XFS and ext3 -- but that made no difference. So finally, I left the /boot partition unchanged but unmounted it and proceeded with the installation. At the summary I then changed the boot setup to prevent any boot loader being installed and any changes made to the MBR. The installer said I might end up with an unbootable system, but I went ahead anyway. The installation completed and on rebooting the boot screen showed only Leap 15.0 as before, but after running grub2-mkconfig in Leap, Tumbleweed was found and I could boot it and it seems to be fine. The disk has GPT with protective MBR. As noted the /boot partition is formatted as FAT and also contains a directory efi, which is populated in the running Leap, which mounts /boot/efi, but in the running Tumbleweed, where /boot is not a separate partition, after mounting the partition Leap sees as /boot/efi, the efi directory is empty (in the running Tumbleweed). I do not plan to install any MS-Windows system, but I do plan to install other Linux-based systems besides Tumbleweed, and possibly a *BSD system. How can I install the bootloader in Tumbleweed -- either from the currently installed Tumbleweed or by reinstalling it -- without risking making both Tumbleweed and Leap unbootable? If that requires deleting the existing /boot partition and add it anew, is it necessary, given the systems I plan to install, to have the efi directory, and if so, do I just have to make /boot/efi a mountpoint, and if not, what else to I need to do to make sure it exists and gets populated as required (if it's required)? And if the efi directory is not needed, what would be the recommended file system for the boot partition? I also have a question concerning having a separate /boot partition shared by Leap, Tumbleweed and any other systems I install: in each system the directory /boot contains versioned files of the kernel, config, etc., but there are also symlinks vmlinuz and initrd pointing to the latest version installed in the system; if Leap and Tumbleweed (and other Linux-based systems) populate the same /boot directory, the last one installed would override existing symlinks, so I don't see how this can work. Is it possible for different systems to use the same /boot directory, installed on a separate partition, and if not, where do the files used for booting different systems need to go, when a separate /boot partition is used? Thanks, Steve Berman -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 62

[opensuse] How to exclude sites from Zypper?
by Anton Aylward 04 Jun '19

04 Jun '19

I mean site not repository. I know, because in the past, I can download at speed in excess of 6megabytes/sec from some sites 9and, lets face it, from YouTube and other streaming sites), and still can if I sftp/wget/cURL from specific ones, but the supposed smarts or mirrorbrain are selecting sites that, while they may be electrically closer, are delivering less than 1% of that, often even less, sometimes single digit byes/sec. Other than firewalling out specific sites, and somehow getting zypper to deal with that error (but I'm not sure how), how can I tell the mirrorbrain selection that I don't want "the closest and mostest"? Who knows, perhaps Estonia is faster than Waterloo? Currently downloading a new kernel at between 88 and 32 kiloBITS/sec -- A: Yes. > Q: Are you sure? >> A: Because it reverses the logical flow of conversation. >>> Q: Why is top posting frowned upon? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 20

[opensuse] leap 15.1 / openvpn - stricter requirements on the server
by Per Jessen 04 Jun '19

04 Jun '19

Just a heads-up, maybe we have some openvpn users here? In leap 15.1 we ship openvpn 2.4.5 - this version has a stricter set of checks on the server setup. I don't think there is a way around rebuilding the pki infrastructure - generate a new CA with sha256 signature, then re-issue all client certificates. -- Per Jessen, Zürich (6.7°C) http://www.hostsuisse.com/ - dedicated server rental in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 4

[opensuse] What happened to Aramok?
by James Knott 02 Jun '19

02 Jun '19

In 15.0 and earlier, I used Aramok for my music player. However, I can't seem to find it. Where is it? tnx jk -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

11 91

[opensuse] Annoying features in Amarok
by James Knott 02 Jun '19

02 Jun '19

Since installing the latest Amarok on 15.1, I've noticed a couple of annoying "features". First, I now get a pop up message with the song title. Since I'm not deaf, I really don't need a pop up telling me what song is starting. The other, more serious "feature" is it stops playing after several songs. I have been using Amarok for a few years and not experienced these before. Any ideas? I have gone into the settings and turned off anything I could find about notifications, but they still happen. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 10

[opensuse] Need help!
by Doug McGarrett 01 Jun '19

01 Jun '19

Hope this is the right place to ask questions! I've come to OpenSuse Thunderbird after losing my PCLOS computer to some kind of glitch, and I don't like the latest version that PCLOS is putting out now--a lot of apps that I have used on a regular basis are gone, along with a lot of libs that I would need to get the apps back, but the libs are not available. I wanted to stay with an rpm system to have at least something familiar, but I'm running into some real questions that I can't answer. 1: Where is the equivalent of the Synaptic Package Manager? There must be a list of everything available on the repo, and from which any one or more can be downloaded and installed. I want to put an icon on the desktop that will lead me to that, whatever it is called in this OS. 2. Why can't I install any printers? I have provided my password TWICE, but then it comes up forbidden? If I open CUPS and provide a password, will I have to install a long string of instructions to install a printer? If so, where should the printer info (ppd from the manufacturer) be stored? (I have the instructions to install printers in PCLOS--- in a typed-in instruction, and are they going to work? I will change the source file for the ppd as required here.) I'm sure that there will be other things that come up. I hope this is the right place to ask them, and I thank any and all who come to my rescue! --doug -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 15

Re: [opensuse] Need help!
by DennisG 31 May '19

31 May '19

On 5/31/19 2:32 PM, DennisG wrote: > On 5/31/19 10:27 AM, Doug McGarrett wrote: > >> ... > > Sometimes it takes some searching and experimenting to nail down the > printer. The openprinting.org site is terrific for locating print > drivers/info, it indicates that the WP-4530 driver is epson-201113w. > Check to see if YaST recognizes that, but I suspect you may need to > install the epson-inkjet-printer-escpr package first. The Epson site > indicates your printer is supported under Linux, and it has an .rpm > you can download/install but it is much better to get it through YaST. > And there is this remark in a post from one of the guys on this list (via google) . . . I have a really nice Epson WP-4530, which works perfectly, has good long-life ink, and does everything, including color, two-side printing, FAX, scan, and copy and has usable manual controls for scanning, FAX, etc., as well as being usable from the computer in Linux or Windows. Also btw, you might also want to check forums.opensuse.org. Installation questions are dealt with there all the time (this list certainly has equal if not more expertise, but the topics tend to be more intermediate/advanced). --dg -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 6

[opensuse] opening legacy file
by Istvan Gabor 31 May '19

31 May '19

Hello: I have an old, some kind of text file I would like to open in openSUSE. According to the file's date it was created in 1997 and the lack of an extension suggests that it was created on an Apple Mac OS. It probably was made by MS Word for Mac. If I open the file with kwrite or hex viewer it contains lots of gibberish and recognizable valid text parts. The first 8 characters in kwrite with iso8859-1 encoding are: ± EXPW In the hex viewer: 0000:0000 | 01 00 B1 00 | ..±.EXPW How could I find an application that opens the file correctly? I can send the file itself in private mail. Thanks, Istvan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 11

[opensuse] pngquant - PNG compressor
by David C. Rankin 31 May '19

31 May '19

Six months or so ago, Felix and I discussed utilities that did a good job of png compression. pngquant does an excellent job, but there were no packages for opensuse. I finally got around to packaging it. Description: pngquant is a PNG compressor that significantly reduces file sizes by converting images to a more efficient 8-bit PNG format with alpha channel (often 60-80% smaller than 24/32-bit PNG files). If you are interested: Build Service Project: https://build.opensuse.org/package/show/home:drankinatty/pngquant RPMS 13.1 through Tumbleweed http://download.opensuse.org/repositories/home:/drankinatty/ (pick your release) pngquant-2.12.2-3.1.x86_64.rpm It is a cli utility, total installed size ~120k (with man1 man page) -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

11 38

[opensuse] TW with xfce4 : kgpg
by ellanios82 31 May '19

31 May '19

TW with xfce4 : kgpg : presently am unable start kgpg & get error "kgpg: error while loading shared libraries: libkabc.so.1: cannot open shared object file: No such file or directory" - where to look find missing libraries? regards ... -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 4

Re: [opensuse] Need help!
by Felix Miata 31 May '19

31 May '19

Doug McGarrett composed in private mail on 2019-05-30 22:25 (UTC-0400): ... Are you really in eastern time zone? Your timestamps suggest not. In KDE/Plasma the default panel/toolbar is at the bottom with a clock at the right end and the menu starter at the left end, just like upstream. If you don't like the default menu format, right click the starter, click Alternatives, and select the other option. One is much like recent Windows, the other like ancient Windows and ancient KDE. In the menu, YaST is in the System Section, Administrator Settings. To open yast from a shell prompt or using Alt-F2: yast opens the text mode version. yast2 opens the GUI version. Its menu/toolbar icons look like this: https://en.opensuse.org/images/6/6a/Yast-new.png Commands in Linux are nearly always case sensitive. In openSUSE, package names are commonly mixed case, but the commands themselves are almost always lower case only. That comes in handy, for making command aliases with "same" names but with one or more upper case character to distinguish it from installed app names. I only setup a printer about once every 10-15 years, so won't try to provide help how that's done in YaST or any other way. -- Evolution as taught in public schools is religion, not science. Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] NoMachine install fails - 15.1
by James Knott 31 May '19

31 May '19

I just tried installing NoMachine! on openSUSE 15.1. It fails with an integrity check. It worked fine on 15.0. Anyone else experience this? https://www.nomachine.com/download/download&id=5 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 8

[opensuse] Once again Alt-F2 # doesn't work - 15.1
by James Knott 30 May '19

30 May '19

Used to be, I could press Alt-F2 # to enter a command to get the man page for that command. It is once again broken. For example, if I try a command such as ls, nothing happens. If the command is fstab, then the man page opens in Firefox. But if the command is mount, something called Discover opens. I get different results, depending on the command I try to get the man page for. Why is something that used to work so reliably now so flakey? This is on a fresh install of 15.1. It also didn't work properly for me in 15.0. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 13

[opensuse] No Internet Access After 15.0 > 15.1
by Mark Misulich 29 May '19

29 May '19

Hi, I did a zypper dup from 15.0 to 15.1 this morning on my laptop. The process went without a hitch, but now that it is complete I can't connect to the internet anymore either with wifi or cable connection. I am using Leap 15.1 with KDE Plasma Version5.12.8, KDE Frameworks Version 5.55.0, and QT Version 5.9.7. I had a similar problem when I did a zypper dup from 42.3 to 15.0 some time ago, so I looked up what I did to resolve the problem then and tried it again. But it isn't working. Here are the two methods I tried: 1. -I switched network settings to wicked from Networkmanager -As root, I ran in terminal: netconfig update -f -I restarted the computer -I switched back to networkmanager Didn't fix the problem this time. 2. -In terminal as root, I ran: rm /etc/resolv.conf && rcnetwork restart Didn't work, so I tried separately: #rm /etc/resolv.conv #rcnetwork restart Didn't work. Anyone have a means to fix this problem? Thanks, Mark -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 38