November 2019 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Create live 15.1 USB
by James Knott 01 Dec '19

01 Dec '19

I'd like to create a live 15.1 on a USB stick. Are there any official procedures? Please note, I want to create a usable system, not an install system. I already have one of those. A search turns up some procedures for Windows, but not Linux. I'd rather use Linux. tnx jk -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 35

[opensuse] KeepPassX question.
by Carlos E. R. 01 Dec '19

01 Dec '19

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, when I use "ctrl-shift-U" at KeepPassX to perform autotype of my login/pass at a site, subsequently KeepPassX minimizes and goes to the end of the tab list. How can I stop that? It is a nuisance. - -- Cheers Carlos E. R. (from 15.1 x86_64 at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCXeE+tRwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVvqsAnjP6Zg7Y41a5qTOGVAOz tWPvR4AhAJ9n/yy3RkKBimEoB4LeT7pyVcw9YQ== =BpYr -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 3

[opensuse] kde, removed desktop symbols (picture) cached
by Simon Becherer 01 Dec '19

01 Dec '19

Hi, i am wondering about how / where kde will cache desktop symbols, because it will show them even if the original source picture is removed: i have a "virtual-machine-management1" desktop entry. with "Icon=yast-vm-management" it shows a monitor and some tools it seems, that this picture was in some update (i use tumbleweed) removed. because if i open properties it will show a other symbol (a white animal at green background). i have more than one computers installed similar, an at one of them also on desktop there is now (i have no idea why) shown the symbol which i see when i open with right mouse click "properties" (animal) in properties, there should normally shown the same symbol i see at the desktop. but at all except one computer i see the old symbol at desktop and the animal symbol at properties. see here: https://paste.opensuse.org/83344057 so my questions are: 1) why is the old symbol still shown even if it seems to be removed (i could not find it actually on my computer by searching for "*yast-vm-management*" in /usr and in /home 2) where is it stored ? 3) how (what symbol) did kde assign a other symbol if the original is removed with other words, when in the desktop entry file is a "non existing" name of a symbol. simoN -- www.becherer.de -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1

[opensuse] On this momentous eve, would be nice if 15.0 was extended until 15.2 was ready...
by David C. Rankin 30 Nov '19

30 Nov '19

All (devs), Here is to wishful thinking. It would be very nice to extend 15.0 updates until 15.2 is out to avoid problems like supported vbox 5.2.34+ triggering 4 error dialogs every boot with the 15.1 kernel modules built on the also supported 6.x versions along with a few additional intermediate issues. Any takers :) -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] adobe reader 9.5 in Leap 15.1
by Istvan Gabor 29 Nov '19

29 Nov '19

Hello: I still need occasionally adobe reader. I installed it according to the description at this github site: cho2/Adobe Reader https://gist.github.com/cho2/79964a49a4f5f545853d3ebdfd1efe73 I followed the instructions of msohni (commented Jun 2, 2019) with slight modifications (different old library dir name). Now adobe reader / acroread runs without any error or even warning messages. Unfortunately the program print window doesn't see any configured printer, only "custom" is available. I copied libcups.so.2 (32 bit) from Leap 42.3 as the github site suggests but still no printers shown. There must be something else, maybe something trivial I missed. Any idea would be appreciated on how to solve it. Thanks, Istvan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 9

[opensuse] xfs planed to be used for root soon?
by L A Walsh 28 Nov '19

28 Nov '19

I was wondering if opensuse was planning to use xfs for its root again, soon? xfs formally has reflink copying and can automatically perform some types of deduplication. It's 1 better than using a hard link since only the data is currently dedupped and 2 copies of the same file can be owned by different people, even though the data is linked. They also have COW, so if you change bytes in the middle, only those bytes need to be written, like 2-1GB files were equal, copied 4k of 1's into the middle of one of the original two files. The space on disk went up by 4k for the new file and its sectors were deduped from the other file. No one would claim perfection, but given the frequent problems with BRTFS, it might yield lower problems. Forgive me if this has already been discussed, but it seemed cool! 'cp' even has support for doing reflnk copies or not. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Squid does not execute squidguard (As it should)
by Rollniak 28 Nov '19

28 Nov '19

Hello everyone, I have some trouble with Squid and SquidGuard on openSUSE 15.1. Apparently squidGuard is not called by squid and does not use the squidGuard database, as a result everything passes the proxy. More details : Tow virtual machines based on OpenSuse leap 15.1 : - A server with Squid and squiguard (Packages: squid squidguard squidguard-doc), the firewall is down for the test. - A client with a GUI and Firefox configured to target the proxy server (Manual configuration). .. Squid configuration files : # # Recommended minimum configuration: # # Example rule allowing access from your local networks. # Adapt to list your (internal) IP networks from where browsing # should be allowed #acl localnet src 0.0.0.1-0.255.255.255 # RFC 1122 "this" network (LAN) #acl localnet src 10.0.0.0/8 # RFC 1918 local private network (LAN) #acl localnet src 100.64.0.0/10 # RFC 6598 shared address space (CGN) #acl localnet src 169.254.0.0/16 # RFC 3927 link-local (directly plugged) machines #acl localnet src 172.16.0.0/12 # RFC 1918 local private network (LAN) #acl localnet src 192.168.0.0/16 # RFC 1918 local private network (LAN) #acl localnet src fc00::/7 # RFC 4193 local private network range #acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines acl localnet src 192.168.122.0/24 acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl CONNECT method CONNECT acl forbiddenword url_regex shopping facebook # Add pass to squidGuard program url_rewrite_program /usr/sbin/squidGuard -c /etc/squidguard.conf #url_rewrite_children 5 # # Recommended minimum Access Permission configuration: # # Deny requests to certain unsafe ports http_access deny !Safe_ports # Deny CONNECT to other than secure SSL ports http_access deny CONNECT !SSL_ports # Only allow cachemgr access from localhost http_access allow localhost manager http_access deny manager # We strongly recommend the following be uncommented to protect innocent # web applications running on the proxy server who think the only # one who can access services on "localhost" is a local user #http_access deny to_localhost # # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS # http_access deny forbiddenword http_access allow localnet # Example rule allowing access from your local networks. # Adapt localnet in the ACL section to list your (internal) IP networks # from where browsing should be allowed http_access allow localhost # And finally deny all other access to this proxy http_access deny all # Squid normally listens to port 3128 http_port 3128 # Uncomment and adjust the following to add a disk cache directory. #cache_dir ufs /var/cache/squid 100 16 256 # Leave coredumps in the first cache dir coredump_dir /var/cache/squid # # Add any of your own refresh_pattern entries above these. # refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern . 0 20% 4320 .. squidguard configuration file # # CONFIG FILE FOR SQUIDGUARD # dbhome /var/lib/squidGuard/db logdir /var/log/squidGuard # # DESTINATION CLASSES: # dest adult { domainlist blacklist/domains urllist blacklist/urls expressionlist blacklist/expressions } dest shopping { domainlist shopping/domains urllist shopping/urls expressionlist shopping/expressions } acl { default { pass !adult !shopping !in-addr any none redirect http://192.168.122.233:/block.html } } I get the shopping list from this url: https://dsi.ut-capitole.fr/blacklists/index_en.php the url_regex works fine, and the squidguard executable does not seem to be called by squid. The logs entry shows only the squidguard launched by hand in my terminal. .. squidguard logs 2019-11-21 14:46:23 [5070] squidGuard 1.4 started (1574343981.465) 2019-11-21 14:46:23 [5070] db update done 2019-11-21 14:46:23 [5070] squidGuard stopped (1574343983.014) 2019-11-21 17:02:34 [7534] New setting: dbhome: /var/lib/squidGuard/db 2019-11-21 17:02:34 [7534] New setting: logdir: /var/log/squidGuard 2019-11-21 17:02:34 [7534] init domainlist /var/lib/squidGuard/db/blacklist/domains 2019-11-21 17:02:34 [7534] loading dbfile /var/lib/squidGuard/db/blacklist/domains.db 2019-11-21 17:02:34 [7534] init urllist /var/lib/squidGuard/db/blacklist/urls 2019-11-21 17:02:34 [7534] loading dbfile /var/lib/squidGuard/db/blacklist/urls.db 2019-11-21 17:02:34 [7534] init expressionlist /var/lib/squidGuard/db/blacklist/expressions 2019-11-21 17:02:34 [7534] init domainlist /var/lib/squidGuard/db/blacklist/shopping 2019-11-21 17:02:34 [7534] loading dbfile /var/lib/squidGuard/db/blacklist/shopping.db 2019-11-21 17:02:34 [7534] squidGuard 1.4 started (1574352154.779) 2019-11-21 17:02:34 [7534] squidGuard ready for requests (1574352154.780) Can you help me to understand why squidguard is not called by squid ? best regards, -- Rollniak -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] ssh: Connection refused
by Wolfgang Mueller 28 Nov '19

28 Nov '19

Recently I have installed Leap 15.1 on a new computer which I have given the internal address 192.168.2.13 (wicked service, no DHCP). Everything works fine, but the computer is not reachable by ssh. /home/wolfgang> ssh 192.168.2.13 ssh: connect to host 192.168.2.13 port 22: Connection refused How can I make it reachable by ssh? Thanks in advance and best regards, Wolfgang -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 16

[opensuse] ssh without password
by Wolfgang Mueller 27 Nov '19

27 Nov '19

In "man ssh" I read: The user creates his/her key pair by running ssh-keygen(1). This stores the private key in [...] ~/.ssh/id_rsa (RSA) and stores the public key in [...] ~/.ssh/id_rsa.pub (RSA) in the user's home directory. The user should then copy the public key to ~/.ssh/authorized_keys in his/her home directory on the remote machine. The authorized_keys file corresponds to the conventional ~/.rhosts file, and has one key per line, though the lines can be very long. After this, the user can log in without giving the password. I followed these instructions. But the remote system still continues asking for a password. Only root can login without specifying a password. Thank you in advance for your help, Wolfgang -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] cleanups of old kernel builds or /usr/src/kernel(or non-current kerns from /usr/src/linux-[45].x.y..?)
by L A Walsh 26 Nov '19

26 Nov '19

Does anyone know of any cleanups that are done on "old" sources (and builds) of /usr/src/linux-[45]versions? I have my /usr/src pointing to /home/src with /home/src/linux usually pointing into /home/linux/<some version>. Not sure when it happened but something cleaned /home/linux/.... out of all linux source+build dirs going back to about 2012, except for 1-2 dirs from last year. Was very weird -- never had seen such a thorough clean. For me, Nov 01 backup was tainted and I skipped back to my Oct 01 full backup where I could recover the missing 35G. Certainly skipped a heartbeat or two until I fund a substantial backup. I have yet to go through any of the sub-backups in Oct but also don't know if anything else might be missing -- doesn't *seem* to be the case -- so was wondering if there were any scripts that might have been having a bad day running on my system, though that would seem to be a bit of a stretch. Certainly not thinking of any deliberate actions by anybody, since except for the build-configurations, most of it would have been downloadable from kernel.org and rebuilt. Just weird. Versioned-backups really are a life saver sometimes... -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0