January 2017 - openSUSE Users - openSUSE Mailing Lists

[opensuse] no flash in chromium in leap 42.2
by Dave Smith 27 Jan '17

27 Jan '17

Just did a clean install of 42.2. Had been using 13.2 since it first came out, best distro I have ever used. Hated to see it go. Anyway, the install went great and so far have only one glitch. I have been unable to get flash working in chromium. There is no pepper flash in the standard repository which chromium normally uses but I did notice adobe flash had been installed. I located an unstable version of pepper flash on the opensuse website version 22.0.0.209-6.1 provided by Kenzy. I installed that version but still no flash in chromium. Any ideas? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3

[opensuse] rights for new user, a small problem of understanding...
by Daniel Bauer 27 Jan '17

27 Jan '17

Hi, I'll give access to my computers to another person with her own new user. I see, that this user can see many or most of my files (read only), but I want that she can only see her own files. How can I achieve that? Do I have to change all the rights of my files? How do I do that safely (without causing problems to programs etc.)? How do I achieve that new files automatically are readable only by me (and root)? Thanks for your help! Daniel -- Daniel Bauer photographer Basel Barcelona http://www.daniel-bauer.com -- Daniel Bauer photographer Basel Barcelona http://www.daniel-bauer.com -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

11 28

[opensuse] clonezilla and windows dual boot
by george from the tribe 27 Jan '17

27 Jan '17

On my new work desktop, I have dual boot with Windows 7 and openSUSE 42.2. It works great. The hard drive is 1TB, partitioned as an MBR, not GPT drive, in accordance with the school policies where I volunteer. The partitions I have set up are about 156GB total for Windows partitions, 16GB of swap, followed by the extended partition, which then has 2 30GB separate root partitions (1 is for a future upgrade), and the rest is my data/home partition. I have a separate, new, unpartitioned 1TB drive that I have just connected inside the desktop, and I am looking to set it up to backup my first drive, in case the first drive fails. My idea is to use clonezilla to clone the entire drive the first time, which will set up all the partitions and everything, as well as back up the data. After that I will do regular synchronizing of the data and root partitions. My main concern is the windows partition. I don't normally use windows, but every once in a while, like once every couple of weeks, I will probably have to boot into windows for something. If I use clonezilla, doesn't it also clone the UUID of the drive and partitions? If so, how will that effect my ability to boot from windows? I have heard that windows does some funny things with verifying the UUID of drives when it boots. I want to keep this drive plugged in regularly so that when I feel like it I can just back things up. For the linux side, how will using clonezilla effect things? In my fstab file, I mount based on drive label, not UUID, so I figured that after using clonezilla, I would go in on a restore configuration and change the blkid of the new drives, so that the system doesn't get confused when trying to boot up. But what about grub2? Do I need to do something about the UUIDs of the partitions on the new drive before booting again, so that it doesn't present a problem? George -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 5

[opensuse] Authentication is required to mount /dev/loop0
by Dennis Gallien 26 Jan '17

26 Jan '17

Several times over the last month a window has opened on my desktop with the above message. Below the heading it says "An application is attempting to perform an action that requires privileges. Authentication is required to perform this action." It asks for the root password. Under "Details" it shows: Application: Action: Mount a filesystem on a system device Vendor: The udisks Project polkit.subject-pid: 29959 polkit.caller-pid: 2350 After trying to cancel out of it and having that lock up the desktop, I am providing the root password but of course that makes me nervous. I have no idea what this is about, never seen it before. AFAICT I haven't done or seen anything running that would cause this. I upgraded to 42.2 about 1-2 months ago. Google was of no help. Suggestions? TIA, --dg -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 4

Re: [opensuse] rights for new user, a small problem of understanding...
by Christopher Myers 26 Jan '17

26 Jan '17

Something simple -- Just make your home directory (/home/whatver) have 700 permissions: chmod 700 /home/whatever Since "users" and "world" won't have read or execute on that folder (with folder permissions, the "execute" is basically "browse"), they won't be able to do anything. (Root, however, will still be able to.) chrismyers:/home # useradd bob Creating mailbox file: File exists chrismyers:/home # su - bob su: warning: cannot change directory to /home/bob: No such file or directory bob@chrismyers:/home> cd cmyers/ bob@chrismyers:/home/cmyers> ls Desktop Public Documents Music bob@chrismyers:/home/cmyers> cd .. bob@chrismyers:/home> exit logout chrismyers:/home # ls -l total 16 drwxr-xr-x 106 cmyers users 4096 Jan 26 11:37 cmyers chrismyers:/home # chmod 700 cmyers chrismyers:/home # su - bob bob@chrismyers:/home> cd cmyers -bash: cd: cmyers: Permission denied bob@chrismyers:/home> cd cmyers/Desktop -bash: cd: cmyers/Desktop: Permission denied bob@chrismyers:/home> >>> Daniel Bauer <linux(a)daniel-bauer.com> 01/26/17 11:27 AM >>> Hi, I'll give access to my computers to another person with her own new user. I see, that this user can see many or most of my files (read only), but I want that she can only see her own files. How can I achieve that? Do I have to change all the rights of my files? How do I do that safely (without causing problems to programs etc.)? How do I achieve that new files automatically are readable only by me (and root)? Thanks for your help! Daniel -- Daniel Bauer photographer Basel Barcelona http://www.daniel-bauer.com -- Daniel Bauer photographer Basel Barcelona http://www.daniel-bauer.com -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] cups 1.7.5 no printing of text/plain files on lexmark postscript printer possible
by Paul Neuwirth 26 Jan '17

26 Jan '17

Hello, I hope a cups expert is here. Maybe the problem is upstream... I never had problems with cups and postscript-capable printers until upgrade to Leap 42.2 and cups 1.7.5 with my Lexmark E360d printer. Printing of PDF files and printing e.g. from LibreOffice works. Self-Test Page leads to only a box and "Lexmark E360d 3011.010 20081117 318480588" printed in. When trying to print plain text, printer claims: "ERROR: ioerror OFFENDING COMMAND: StartData STACK: 0 ( cryptic signs ) arraytype" maybe it's just a missing font (shouldn't exotic font data be included?).. no Idea how to check/correct thanks for any hint I also looked into the data actually sent to the printer (hex trace printout): it starts with PJL data, and then postscript, but I see very often some the keyword pdf in it.. Data (captured from ipp stream, being sent from network print server 1:1 to printer via parallel port) at the end of mail.. unfortunately i have no such data from previous cups versions, nor somewhere installed. Worst, no older cups version available for Leap 42.2 :( all cups packages installed are from openSuSE Main oss repository: (i actually did create even a new /etc/cups directory, parts of old config was still from SuSE 6.4 iirc) # rpm -qav | grep cups liboyranos0-cups-0.9.5-1.6.x86_64 libgnomecups-lang-0.2.3-141.3.noarch cups-filters-ghostscript-1.8.2-1.5.x86_64 cups-filters-foomatic-rip-1.8.2-1.5.x86_64 cups-libs-32bit-1.7.5-7.10.x86_64 cups-1.7.5-7.10.x86_64 python3-cupshelpers-1.5.7-7.1.noarch cups-backends-1.1-7.1.noarch cups-client-1.7.5-7.10.x86_64 cups-libs-1.7.5-7.10.x86_64 cups-filters-1.8.2-1.5.x86_64 cups-filters-cups-browsed-1.8.2-1.5.x86_64 python-cups-1.9.72-3.2.x86_64 monitoring-plugins-cups-2.2-29.1.x86_64 python3-cups-1.9.72-4.2.x86_64 cups-pk-helper-lang-0.2.5-6.4.noarch cups-pk-helper-0.2.5-6.4.x86_64 libgnomecups-0.2.3-141.3.x86_64 /etc/cups/printers.conf <DefaultPrinter E360d> UUID urn:uuid:e65febf1-6c2d-37ec-515f-8223cbcaa78c AuthInfoRequired none Info Lexmark E360d Foomatic/Postscript DeviceURI ipp://printserver1.swabian.net/LPT2 State Idle StateTime 1485446941 Type 8433692 Accepting Yes Shared Yes JobSheets none none QuotaPeriod 0 PageLimit 0 KLimit 0 OpPolicy default ErrorPolicy stop-printer </Printer> other config files are original, only changed to allow remote access. from /var/log/cups/error.log: I [26/Jan/2017:11:24:15 +0100] Saving printers.conf... I [26/Jan/2017:11:24:15 +0100] Saving job.cache... D [26/Jan/2017:11:24:15 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Printing jobs and dirty files" I [26/Jan/2017:11:24:16 +0100] Scheduler shutting down normally. D [26/Jan/2017:11:24:16 +0100] Discarding unused server-stopped event... I [26/Jan/2017:11:24:16 +0100] Saving job.cache... D [26/Jan/2017:11:24:16 +0100] cupsdStopSelect() I [26/Jan/2017:11:24:16 +0100] Listening to 172.18.0.1:631 (IPv4) I [26/Jan/2017:11:24:16 +0100] Listening to 172.17.0.1:631 (IPv4) I [26/Jan/2017:11:24:16 +0100] Listening to [v1.::1]:631 (IPv6) I [26/Jan/2017:11:24:16 +0100] Listening to 127.0.0.1:631 (IPv4) I [26/Jan/2017:11:24:16 +0100] Listening to /run/cups/cups.sock (Domain) I [26/Jan/2017:11:24:16 +0100] Remote access is enabled. D [26/Jan/2017:11:24:16 +0100] Added auto ServerAlias alpha D [26/Jan/2017:11:24:16 +0100] Added auto ServerAlias alpha.swabian.net I [26/Jan/2017:11:24:16 +0100] Loaded configuration file "/etc/cups/cupsd.conf" D [26/Jan/2017:11:24:16 +0100] Repairing access permissions of "/etc/cups/classes.conf" I [26/Jan/2017:11:24:16 +0100] Using default TempDir of /var/spool/cups/tmp... I [26/Jan/2017:11:24:16 +0100] Configured for up to 100 clients. I [26/Jan/2017:11:24:16 +0100] Allowing up to 100 client connections per host. I [26/Jan/2017:11:24:16 +0100] Full reload is required. I [26/Jan/2017:11:24:16 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 44 types, 79 filters... D [26/Jan/2017:11:24:16 +0100] Loading printer E360d... D [26/Jan/2017:11:24:16 +0100] load_ppd: Loading /var/cache/cups/E360d.data... D [26/Jan/2017:11:24:16 +0100] cupsdRegisterPrinter(p=0x557750f23ed0(E360d)) I [26/Jan/2017:11:24:16 +0100] Loading job cache file "/var/cache/cups/job.cache"... D [26/Jan/2017:11:24:16 +0100] [Job 715] Loading from cache... [... D [26/Jan/2017:11:24:16 +0100] [Job 1214] Loading from cache... D [26/Jan/2017:11:24:16 +0100] [Job 715] Removing from history. I [26/Jan/2017:11:24:16 +0100] Full reload complete. D [26/Jan/2017:11:24:16 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)") I [26/Jan/2017:11:24:16 +0100] Cleaning out old files in "/var/spool/cups/tmp". D [26/Jan/2017:11:24:16 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp/.cache", pattern="(null)") I [26/Jan/2017:11:24:16 +0100] Cleaning out old files in "/var/spool/cups/tmp/.cache". D [26/Jan/2017:11:24:16 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp/.cache/fontconfig", pattern="(null)") I [26/Jan/2017:11:24:16 +0100] Cleaning out old files in "/var/spool/cups/tmp/.cache/fontconfig". D [26/Jan/2017:11:24:16 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp") I [26/Jan/2017:11:24:16 +0100] Cleaning out old files in "/var/cache/cups". D [26/Jan/2017:11:24:16 +0100] Calling FindDeviceById(cups-E360d) D [26/Jan/2017:11:24:16 +0100] FindDeviceById failed: org.freedesktop.ColorManager.NotFound:device id 'cups-E360d' does not exist D [26/Jan/2017:11:24:16 +0100] Using profile ID "E360d-Gray..". D [26/Jan/2017:11:24:16 +0100] Calling CreateProfile(E360d-Gray..,temp) D [26/Jan/2017:11:24:16 +0100] Created profile "/org/freedesktop/ColorManager/profiles/E360d_Gray__". D [26/Jan/2017:11:24:16 +0100] Using profile ID "E360d-RGB..". D [26/Jan/2017:11:24:16 +0100] Calling CreateProfile(E360d-RGB..,temp) D [26/Jan/2017:11:24:16 +0100] Created profile "/org/freedesktop/ColorManager/profiles/E360d_RGB__". I [26/Jan/2017:11:24:16 +0100] Registering ICC color profiles for "E360d". D [26/Jan/2017:11:24:16 +0100] Calling CreateDevice(cups-E360d,temp) D [26/Jan/2017:11:24:16 +0100] Created device "/org/freedesktop/ColorManager/devices/cups_E360d". D [26/Jan/2017:11:24:16 +0100] Calling /org/freedesktop/ColorManager/devices/cups_E360d:AddProfile(/org/freedesktop/ColorManager/profiles/E360d_Gray__) [soft] D [26/Jan/2017:11:24:16 +0100] Calling /org/freedesktop/ColorManager/devices/cups_E360d:AddProfile(/org/freedesktop/ColorManager/profiles/E360d_RGB__) [soft] I [26/Jan/2017:11:24:16 +0100] Listening to 172.18.0.1:631 on fd 8... I [26/Jan/2017:11:24:16 +0100] Listening to 172.17.0.1:631 on fd 9... E [26/Jan/2017:11:24:16 +0100] Unable to bind socket for address [v1.::1]:631 - Cannot assign requested address. I [26/Jan/2017:11:24:16 +0100] Listening to 127.0.0.1:631 on fd 10... I [26/Jan/2017:11:24:16 +0100] Listening to /run/cups/cups.sock:631 on fd 11... I [26/Jan/2017:11:24:16 +0100] Resuming new connection processing... D [26/Jan/2017:11:24:16 +0100] Avahi server connection now available, registering printers for Bonjour broadcasting. D [26/Jan/2017:11:24:16 +0100] Registering "Lexmark E360d Foomatic/Postscript @ alpha" with DNS-SD type "_printer._tcp". D [26/Jan/2017:11:24:16 +0100] Registering "Lexmark E360d Foomatic/Postscript @ alpha" with DNS-SD type "_ipps._tcp". D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" printer-type=0x80B01E D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" printer-state=3 D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" Duplex=T D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" Color=T D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" TLS=1.2 D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" UUID=e65febf1-6c2d-37ec-515f-8223cbcaa78c D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" pdl=application/octet-stream,application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" product=(Lexmark E360dn) D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" priority=0 D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" adminurl=https://alpha.local:631/printers/E360d D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" ty=Unknown D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" rp=printers/E360d D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" qtotal=1 D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" txtvers=1 D [26/Jan/2017:11:24:16 +0100] Registering "Lexmark E360d Foomatic/Postscript @ alpha" with DNS-SD type "_ipp._tcp". D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" printer-type=0x80B01E D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" printer-state=3 D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" Duplex=T D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" Color=T D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" TLS=1.2 D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" UUID=e65febf1-6c2d-37ec-515f-8223cbcaa78c D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" pdl=application/octet-stream,application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" product=(Lexmark E360dn) D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" priority=0 D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" adminurl=https://alpha.local:631/printers/E360d D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" ty=Unknown D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" rp=printers/E360d D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" qtotal=1 D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" txtvers=1 D [26/Jan/2017:11:24:16 +0100] Registering "Lexmark E360d Foomatic/Postscript @ alpha" with DNS-SD type "_printer._tcp". D [26/Jan/2017:11:24:16 +0100] Registering "Lexmark E360d Foomatic/Postscript @ alpha" with DNS-SD type "_ipps._tcp". D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" printer-type=0x80B01E D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" printer-state=3 D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" Duplex=T D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" Color=T D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" TLS=1.2 D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" UUID=e65febf1-6c2d-37ec-515f-8223cbcaa78c D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" pdl=application/octet-stream,application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" product=(Lexmark E360dn) D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" priority=0 D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" adminurl=https://alpha.local:631/printers/E360d D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" ty=Unknown D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" rp=printers/E360d D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" qtotal=1 D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" txtvers=1 D [26/Jan/2017:11:24:16 +0100] Registering "Lexmark E360d Foomatic/Postscript @ alpha" with DNS-SD type "_ipp._tcp". D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" printer-type=0x80B01E D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" printer-state=3 D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" Duplex=T D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" Color=T D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" TLS=1.2 D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" UUID=e65febf1-6c2d-37ec-515f-8223cbcaa78c D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" pdl=application/octet-stream,application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" product=(Lexmark E360dn) D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" priority=0 D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" adminurl=https://alpha.local:631/printers/E360d D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" ty=Unknown D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" rp=printers/E360d D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" qtotal=1 D [26/Jan/2017:11:24:16 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" txtvers=1 D [26/Jan/2017:11:24:16 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy" D [26/Jan/2017:11:24:16 +0100] Discarding unused server-started event... D [26/Jan/2017:11:24:17 +0100] Report: clients=0 D [26/Jan/2017:11:24:17 +0100] Report: jobs=499 D [26/Jan/2017:11:24:17 +0100] Report: jobs-active=0 D [26/Jan/2017:11:24:17 +0100] Report: printers=1 D [26/Jan/2017:11:24:17 +0100] Report: stringpool-string-count=1127 D [26/Jan/2017:11:24:17 +0100] Report: stringpool-alloc-bytes=6656 D [26/Jan/2017:11:24:17 +0100] Report: stringpool-total-bytes=20920 D [26/Jan/2017:11:24:19 +0100] [Client 17] Accepted from localhost (Domain) D [26/Jan/2017:11:24:19 +0100] [Client 17] Waiting for request. D [26/Jan/2017:11:24:19 +0100] [Client 17] POST / HTTP/1.1 D [26/Jan/2017:11:24:19 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy" D [26/Jan/2017:11:24:19 +0100] [Client 17] No authentication data provided. D [26/Jan/2017:11:24:19 +0100] [Client 17] 2.0 CUPS-Get-Default 1 D [26/Jan/2017:11:24:19 +0100] CUPS-Get-Default D [26/Jan/2017:11:24:19 +0100] [Client 17] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost D [26/Jan/2017:11:24:19 +0100] [Client 17] Content-Length: 1116 D [26/Jan/2017:11:24:19 +0100] [Client 17] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1116, response=0x557750fbd340(IPP_IDLE), pipe_pid=0, file=-1 D [26/Jan/2017:11:24:19 +0100] [Client 17] Writing IPP response, ipp_state=DATA, old wused=0, new wused=0 D [26/Jan/2017:11:24:19 +0100] [Client 17] bytes=0, http_state=0, data_remaining=0 D [26/Jan/2017:11:24:19 +0100] [Client 17] Waiting for request. D [26/Jan/2017:11:24:19 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients" D [26/Jan/2017:11:24:19 +0100] [Client 17] POST /printers/E360d HTTP/1.1 D [26/Jan/2017:11:24:19 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy" D [26/Jan/2017:11:24:19 +0100] [Client 17] No authentication data provided. D [26/Jan/2017:11:24:19 +0100] [Client 17] 2.0 Create-Job 2 D [26/Jan/2017:11:24:19 +0100] Create-Job ipp://localhost:631/printers/E360d D [26/Jan/2017:11:24:19 +0100] cupsdMarkDirty(---J-) D [26/Jan/2017:11:24:19 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients" D [26/Jan/2017:11:24:19 +0100] add_job: requesting-user-name="root" I [26/Jan/2017:11:24:19 +0100] [Job 1215] Adding start banner page "none". D [26/Jan/2017:11:24:19 +0100] Discarding unused job-created event... I [26/Jan/2017:11:24:19 +0100] [Job 1215] Queued on "E360d" by "root". D [26/Jan/2017:11:24:19 +0100] [Client 17] Returning IPP successful-ok for Create-Job (ipp://localhost:631/printers/E360d) from localhost D [26/Jan/2017:11:24:19 +0100] [Client 17] Content-Length: 184 D [26/Jan/2017:11:24:19 +0100] [Client 17] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=184, response=0x557750fbce70(IPP_IDLE), pipe_pid=0, file=-1 D [26/Jan/2017:11:24:19 +0100] [Client 17] Writing IPP response, ipp_state=DATA, old wused=0, new wused=0 D [26/Jan/2017:11:24:19 +0100] [Client 17] bytes=0, http_state=0, data_remaining=0 D [26/Jan/2017:11:24:19 +0100] [Client 17] Waiting for request. D [26/Jan/2017:11:24:19 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files" D [26/Jan/2017:11:24:19 +0100] [Client 17] POST /printers/E360d HTTP/1.1 D [26/Jan/2017:11:24:19 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files" D [26/Jan/2017:11:24:19 +0100] [Client 17] No authentication data provided. D [26/Jan/2017:11:24:19 +0100] [Client 17] 2.0 Send-Document 3 D [26/Jan/2017:11:24:19 +0100] Send-Document ipp://localhost:631/printers/E360d D [26/Jan/2017:11:24:19 +0100] cupsdIsAuthorized: requesting-user-name="root" D [26/Jan/2017:11:24:19 +0100] [Job 1215] Auto-typing file... D [26/Jan/2017:11:24:19 +0100] [Job 1215] Request file type is text/plain. D [26/Jan/2017:11:24:19 +0100] cupsdMarkDirty(---J-) D [26/Jan/2017:11:24:19 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files" I [26/Jan/2017:11:24:19 +0100] [Job 1215] File of type text/plain queued by "root". I [26/Jan/2017:11:24:19 +0100] [Job 1215] Adding end banner page "none". D [26/Jan/2017:11:24:19 +0100] cupsdMarkDirty(---J-) D [26/Jan/2017:11:24:19 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files" D [26/Jan/2017:11:24:19 +0100] [Job 1215] time-at-processing=1485426259 D [26/Jan/2017:11:24:19 +0100] cupsdMarkDirty(---J-) D [26/Jan/2017:11:24:19 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files" D [26/Jan/2017:11:24:19 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files" D [26/Jan/2017:11:24:19 +0100] Discarding unused printer-state-changed event... D [26/Jan/2017:11:24:19 +0100] [Job 1215] 3 filters for job: D [26/Jan/2017:11:24:19 +0100] [Job 1215] texttopdf (text/plain to application/pdf, cost 32) D [26/Jan/2017:11:24:19 +0100] [Job 1215] pdftopdf (application/pdf to application/vnd.cups-pdf, cost 66) D [26/Jan/2017:11:24:19 +0100] [Job 1215] foomatic-rip (application/vnd.cups-pdf to printer/E360d, cost 0) D [26/Jan/2017:11:24:19 +0100] [Job 1215] job-sheets=none,none D [26/Jan/2017:11:24:19 +0100] [Job 1215] argv[0]="E360d" D [26/Jan/2017:11:24:19 +0100] [Job 1215] argv[1]="1215" D [26/Jan/2017:11:24:19 +0100] [Job 1215] argv[2]="root" D [26/Jan/2017:11:24:19 +0100] [Job 1215] argv[3]="(stdin)" D [26/Jan/2017:11:24:19 +0100] [Job 1215] argv[4]="1" D [26/Jan/2017:11:24:19 +0100] [Job 1215] argv[5]="finishings=3 number-up=1 job-uuid=urn:uuid:3542e92d-aae6-34f7-5b1c-1ff7d9d7a9da job-originating-host-name=localhost time-at-creation=1485426259 time-at-processing=1485426259" D [26/Jan/2017:11:24:19 +0100] [Job 1215] argv[6]="/var/spool/cups/d01215-001" D [26/Jan/2017:11:24:19 +0100] [Job 1215] envp[0]="CUPS_CACHEDIR=/var/cache/cups" D [26/Jan/2017:11:24:19 +0100] [Job 1215] envp[1]="CUPS_DATADIR=/usr/share/cups" D [26/Jan/2017:11:24:19 +0100] [Job 1215] envp[2]="CUPS_DOCROOT=/usr/share/cups/webcontent" D [26/Jan/2017:11:24:19 +0100] [Job 1215] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts" D [26/Jan/2017:11:24:19 +0100] [Job 1215] envp[4]="CUPS_REQUESTROOT=/var/spool/cups" D [26/Jan/2017:11:24:19 +0100] [Job 1215] envp[5]="CUPS_SERVERBIN=/usr/lib/cups" D [26/Jan/2017:11:24:19 +0100] [Job 1215] envp[6]="CUPS_SERVERROOT=/etc/cups" D [26/Jan/2017:11:24:19 +0100] [Job 1215] envp[7]="CUPS_STATEDIR=/run/cups" D [26/Jan/2017:11:24:19 +0100] [Job 1215] envp[8]="HOME=/var/spool/cups/tmp" D [26/Jan/2017:11:24:19 +0100] [Job 1215] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin" D [26/Jan/2017:11:24:19 +0100] [Job 1215] envp[10]="SERVER_ADMIN=root(a)alpha.swabian.net" D [26/Jan/2017:11:24:19 +0100] [Job 1215] envp[11]="SOFTWARE=CUPS/1.7.5" D [26/Jan/2017:11:24:19 +0100] [Job 1215] envp[12]="TMPDIR=/var/spool/cups/tmp" D [26/Jan/2017:11:24:19 +0100] [Job 1215] envp[13]="USER=root" D [26/Jan/2017:11:24:19 +0100] [Job 1215] envp[14]="CUPS_MAX_MESSAGE=2047" D [26/Jan/2017:11:24:19 +0100] [Job 1215] envp[15]="CUPS_SERVER=/run/cups/cups.sock" D [26/Jan/2017:11:24:19 +0100] [Job 1215] envp[16]="CUPS_ENCRYPTION=IfRequested" D [26/Jan/2017:11:24:19 +0100] [Job 1215] envp[17]="IPP_PORT=631" D [26/Jan/2017:11:24:19 +0100] [Job 1215] envp[18]="CHARSET=utf-8" D [26/Jan/2017:11:24:19 +0100] [Job 1215] envp[19]="LANG=en_US.UTF-8" D [26/Jan/2017:11:24:19 +0100] [Job 1215] envp[20]="PPD=/etc/cups/ppd/E360d.ppd" D [26/Jan/2017:11:24:19 +0100] [Job 1215] envp[21]="RIP_MAX_CACHE=128m" D [26/Jan/2017:11:24:19 +0100] [Job 1215] envp[22]="CONTENT_TYPE=text/plain" D [26/Jan/2017:11:24:19 +0100] [Job 1215] envp[23]="DEVICE_URI=ipp://printserver1.swabian.net/LPT2" D [26/Jan/2017:11:24:19 +0100] [Job 1215] envp[24]="PRINTER_INFO=Lexmark E360d Foomatic/Postscript" D [26/Jan/2017:11:24:19 +0100] [Job 1215] envp[25]="PRINTER_LOCATION=" D [26/Jan/2017:11:24:19 +0100] [Job 1215] envp[26]="PRINTER=E360d" D [26/Jan/2017:11:24:19 +0100] [Job 1215] envp[27]="PRINTER_STATE_REASONS=none" D [26/Jan/2017:11:24:19 +0100] [Job 1215] envp[28]="CUPS_FILETYPE=document" D [26/Jan/2017:11:24:19 +0100] [Job 1215] envp[29]="FINAL_CONTENT_TYPE=application/vnd.cups-pdf" D [26/Jan/2017:11:24:19 +0100] [Job 1215] envp[30]="AUTH_I****" I [26/Jan/2017:11:24:19 +0100] [Job 1215] Started filter /usr/lib/cups/filter/texttopdf (PID 22942) I [26/Jan/2017:11:24:19 +0100] [Job 1215] Started filter /usr/lib/cups/filter/pdftopdf (PID 22943) I [26/Jan/2017:11:24:19 +0100] [Job 1215] Started filter /usr/lib/cups/filter/foomatic-rip (PID 22944) I [26/Jan/2017:11:24:19 +0100] [Job 1215] Started backend /usr/lib/cups/backend/ipp (PID 22945) D [26/Jan/2017:11:24:19 +0100] Discarding unused job-state-changed event... D [26/Jan/2017:11:24:19 +0100] [Client 17] Returning IPP successful-ok for Send-Document (ipp://localhost:631/printers/E360d) from localhost D [26/Jan/2017:11:24:19 +0100] [Client 17] Content-Length: 176 D [26/Jan/2017:11:24:19 +0100] [Client 17] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=176, response=0x557750fba710(IPP_IDLE), pipe_pid=0, file=-1 D [26/Jan/2017:11:24:19 +0100] [Client 17] Writing IPP response, ipp_state=DATA, old wused=0, new wused=0 D [26/Jan/2017:11:24:19 +0100] [Client 17] bytes=0, http_state=0, data_remaining=0 D [26/Jan/2017:11:24:19 +0100] [Client 17] Waiting for request. D [26/Jan/2017:11:24:19 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients and dirty files" D [26/Jan/2017:11:24:19 +0100] [Client 17] HTTP_STATE_WAITING Closing on EOF D [26/Jan/2017:11:24:19 +0100] [Client 17] Closing connection. D [26/Jan/2017:11:24:19 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files" D [26/Jan/2017:11:24:19 +0100] [Job 1215] Sending stdin for job... D [26/Jan/2017:11:24:19 +0100] [Job 1215] update_reasons(attr=0(), s="+connecting-to-device") D [26/Jan/2017:11:24:19 +0100] [Job 1215] STATE: +connecting-to-device D [26/Jan/2017:11:24:19 +0100] cupsdMarkDirty(---J-) D [26/Jan/2017:11:24:19 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Printing jobs and dirty files" D [26/Jan/2017:11:24:19 +0100] [Job 1215] Looking up "printserver1.swabian.net"... D [26/Jan/2017:11:24:19 +0100] Discarding unused printer-state-changed event... D [26/Jan/2017:11:24:19 +0100] [Job 1215] backendWaitLoop(snmp_fd=5, addr=0x55fc40671938, side_cb=0x55fc402b2a00) D [26/Jan/2017:11:24:19 +0100] [Job 1215] Page = 595x842; 18,36 to 577,806 D [26/Jan/2017:11:24:19 +0100] [Job 1215] Calling FindDeviceById(cups-E360d) D [26/Jan/2017:11:24:19 +0100] [Job 1215] Found device /org/freedesktop/ColorManager/devices/cups_E360d D [26/Jan/2017:11:24:19 +0100] [Job 1215] Calling org.freedesktop.ColorManager.Device.Get(ProfilingInhibitors) D [26/Jan/2017:11:24:19 +0100] [Job 1215] 'CM Color Calibration' Mode in SPOOLER-LESS: Off D [26/Jan/2017:11:24:19 +0100] [Job 1215] Getting input from file D [26/Jan/2017:11:24:19 +0100] [Job 1215] foomatic-rip version 1.8.2 running... D [26/Jan/2017:11:24:19 +0100] [Job 1215] Parsing PPD file ... D [26/Jan/2017:11:24:19 +0100] [Job 1215] Added option ColorSpace D [26/Jan/2017:11:24:19 +0100] [Job 1215] Added option PageSize D [26/Jan/2017:11:24:19 +0100] [Job 1215] CUPS page accounting disabled by driver. D [26/Jan/2017:11:24:19 +0100] [Job 1215] Added option ImageableArea D [26/Jan/2017:11:24:19 +0100] [Job 1215] Added option PaperDimension D [26/Jan/2017:11:24:19 +0100] [Job 1215] Added option InputSlot D [26/Jan/2017:11:24:19 +0100] [Job 1215] Added option Duplex D [26/Jan/2017:11:24:19 +0100] [Job 1215] Added option Resolution D [26/Jan/2017:11:24:19 +0100] [Job 1215] Added option Font D [26/Jan/2017:11:24:19 +0100] [Job 1215] Parameter Summary D [26/Jan/2017:11:24:19 +0100] [Job 1215] ----------------- D [26/Jan/2017:11:24:19 +0100] [Job 1215] Spooler: cups D [26/Jan/2017:11:24:19 +0100] [Job 1215] Printer: E360d D [26/Jan/2017:11:24:19 +0100] [Job 1215] Shell: /bin/bash D [26/Jan/2017:11:24:19 +0100] [Job 1215] PPD file: /etc/cups/ppd/E360d.ppd D [26/Jan/2017:11:24:19 +0100] [Job 1215] ATTR file: D [26/Jan/2017:11:24:19 +0100] [Job 1215] Printer model: Lexmark E360d Foomatic/Postscript D [26/Jan/2017:11:24:19 +0100] [Job 1215] Job title: stdin D [26/Jan/2017:11:24:19 +0100] [Job 1215] File(s) to be printed: D [26/Jan/2017:11:24:19 +0100] [Job 1215] <STDIN> D [26/Jan/2017:11:24:19 +0100] [Job 1215] Ghostscript extra search path ('GS_LIB'): /usr/share/cups/fonts D [26/Jan/2017:11:24:19 +0100] [Job 1215] Printing system options: D [26/Jan/2017:11:24:19 +0100] [Job 1215] Pondering option 'finishings=3' D [26/Jan/2017:11:24:19 +0100] [Job 1215] Unknown option finishings=3. D [26/Jan/2017:11:24:19 +0100] [Job 1215] Pondering option 'number-up=1' D [26/Jan/2017:11:24:19 +0100] [Job 1215] Unknown option number-up=1. D [26/Jan/2017:11:24:19 +0100] [Job 1215] Pondering option 'job-uuid=urn:uuid:3542e92d-aae6-34f7-5b1c-1ff7d9d7a9da' D [26/Jan/2017:11:24:19 +0100] [Job 1215] Unknown option job-uuid=urn:uuid:3542e92d-aae6-34f7-5b1c-1ff7d9d7a9da. D [26/Jan/2017:11:24:19 +0100] [Job 1215] Pondering option 'job-originating-host-name=localhost' D [26/Jan/2017:11:24:19 +0100] [Job 1215] Unknown option job-originating-host-name=localhost. D [26/Jan/2017:11:24:19 +0100] [Job 1215] Pondering option 'time-at-creation=1485426259' D [26/Jan/2017:11:24:19 +0100] [Job 1215] Unknown option time-at-creation=1485426259. D [26/Jan/2017:11:24:19 +0100] [Job 1215] Pondering option 'time-at-processing=1485426259' D [26/Jan/2017:11:24:19 +0100] [Job 1215] Unknown option time-at-processing=1485426259. D [26/Jan/2017:11:24:19 +0100] [Job 1215] CM Color Calibration Mode in CUPS: Off D [26/Jan/2017:11:24:19 +0100] [Job 1215] Options from the PPD file: D [26/Jan/2017:11:24:19 +0100] [Job 1215] ================================================ D [26/Jan/2017:11:24:19 +0100] [Job 1215] File: <STDIN> D [26/Jan/2017:11:24:19 +0100] [Job 1215] ================================================ D [26/Jan/2017:11:24:21 +0100] [Job 1215] PID 22942 (/usr/lib/cups/filter/texttopdf) exited with no errors. D [26/Jan/2017:11:24:21 +0100] [Job 1215] Filetype: PDF D [26/Jan/2017:11:24:21 +0100] [Job 1215] PostScript option found: PageSize=Letter: "<</PageSize[612 792]/ImagingBBox null>>setpagedevice" D [26/Jan/2017:11:24:21 +0100] [Job 1215] Driver does not understand PDF input, converting to PostScript D [26/Jan/2017:11:24:21 +0100] [Job 1215] Storing temporary files in /var/spool/cups/tmp D [26/Jan/2017:11:24:21 +0100] [Job 1215] PID 22943 (/usr/lib/cups/filter/pdftopdf) exited with no errors. D [26/Jan/2017:11:24:21 +0100] [Job 1215] Starting process "pdf-to-ps" (generation 1) D [26/Jan/2017:11:24:21 +0100] [Job 1215] Printer make and model: Lexmark Lexmark E360dn D [26/Jan/2017:11:24:21 +0100] [Job 1215] Running command line for pstops: pstops 1215 root stdin 1 ' finishings=3 job-uuid=urn:uuid:3542e92d-aae6-34f7-5b1c-1ff7d9d7a9da job-originating-host-name=localhost time-at-creation=1485426259 time-at-processing=1485426259' D [26/Jan/2017:11:24:21 +0100] [Job 1215] Using image rendering resolution 600 dpi D [26/Jan/2017:11:24:21 +0100] [Job 1215] Running command line for pdftops: pdftops -level3 -origpagesizes -nocenter -r 600 /var/spool/cups/tmp/foomatic-fOwfSD - D [26/Jan/2017:11:24:21 +0100] [Job 1215] Started filter pdftops (PID 22948) D [26/Jan/2017:11:24:21 +0100] [Job 1215] Started filter pstops (PID 22949) D [26/Jan/2017:11:24:21 +0100] [Job 1215] Page = 595x842; 18,36 to 577,806 D [26/Jan/2017:11:24:21 +0100] [Job 1215] slow_collate=0, slow_duplex=0, slow_order=0 D [26/Jan/2017:11:24:21 +0100] [Job 1215] Before copy_comments - %!PS-Adobe-3.0 D [26/Jan/2017:11:24:21 +0100] [Job 1215] %!PS-Adobe-3.0 D [26/Jan/2017:11:24:21 +0100] [Job 1215] %Produced by poppler pdftops version: 0.43.0 (http://poppler.freedesktop.org) D [26/Jan/2017:11:24:21 +0100] [Job 1215] %%Creator: texttopdf/1.8.2 D [26/Jan/2017:11:24:21 +0100] [Job 1215] %%LanguageLevel: 3 D [26/Jan/2017:11:24:21 +0100] [Job 1215] %%DocumentSuppliedResources: (atend) D [26/Jan/2017:11:24:21 +0100] [Job 1215] %%DocumentMedia: A4 595 842 0 () () D [26/Jan/2017:11:24:21 +0100] [Job 1215] %%BoundingBox: 0 0 595 842 D [26/Jan/2017:11:24:21 +0100] [Job 1215] %%Pages: 4 D [26/Jan/2017:11:24:21 +0100] [Job 1215] %%EndComments D [26/Jan/2017:11:24:21 +0100] [Job 1215] Before copy_prolog - %%BeginProlog D [26/Jan/2017:11:24:21 +0100] [Job 1215] Filetype: PostScript D [26/Jan/2017:11:24:21 +0100] [Job 1215] Reading PostScript input ... D [26/Jan/2017:11:24:21 +0100] [Job 1215] --> This document is DSC-conforming! D [26/Jan/2017:11:24:21 +0100] [Job 1215] Found %RBINumCopies: 1 D [26/Jan/2017:11:24:21 +0100] [Job 1215] ----------- D [26/Jan/2017:11:24:21 +0100] [Job 1215] Found: %%BeginProlog D [26/Jan/2017:11:24:21 +0100] [Job 1215] Inserting option code into "Prolog" section. D [26/Jan/2017:11:24:21 +0100] [Job 1215] Before copy_setup - %%BeginSetup D [26/Jan/2017:11:24:21 +0100] [Job 1215] Found: %%EndProlog D [26/Jan/2017:11:24:21 +0100] [Job 1215] ----------- D [26/Jan/2017:11:24:21 +0100] [Job 1215] Found: %%BeginSetup D [26/Jan/2017:11:24:21 +0100] [Job 1215] Found: %%BeginFeature: *Resolution 600x600dpi D [26/Jan/2017:11:24:21 +0100] [Job 1215] Option: Resolution=600x600dpi D [26/Jan/2017:11:24:21 +0100] [Job 1215] --> Option will be set by PostScript interpreter D [26/Jan/2017:11:24:21 +0100] [Job 1215] Found: %%BeginFeature: *PageSize A4 D [26/Jan/2017:11:24:21 +0100] [Job 1215] Option: PageSize=A4 D [26/Jan/2017:11:24:21 +0100] [Job 1215] --> Option will be set by PostScript interpreter D [26/Jan/2017:11:24:21 +0100] [Job 1215] Found: %%BeginFeature: *InputSlot Multipurpose D [26/Jan/2017:11:24:21 +0100] [Job 1215] Option: InputSlot=Multipurpose D [26/Jan/2017:11:24:21 +0100] [Job 1215] --> Option will be set by PostScript interpreter D [26/Jan/2017:11:24:21 +0100] [Job 1215] Found: %%BeginFeature: *Duplex None D [26/Jan/2017:11:24:21 +0100] [Job 1215] Option: Duplex=None D [26/Jan/2017:11:24:21 +0100] [Job 1215] --> Option will be set by PostScript interpreter D [26/Jan/2017:11:24:21 +0100] [Job 1215] Before page loop - %%Page: 1 1 D [26/Jan/2017:11:24:21 +0100] [Job 1215] Copying page 1... D [26/Jan/2017:11:24:21 +0100] [Job 1215] pagew = 559.0, pagel = 770.0 D [26/Jan/2017:11:24:21 +0100] [Job 1215] bboxx = 0, bboxy = 0, bboxw = 595, bboxl = 842 D [26/Jan/2017:11:24:21 +0100] [Job 1215] PageLeft = 18.0, PageRight = 577.0 D [26/Jan/2017:11:24:21 +0100] [Job 1215] PageTop = 806.0, PageBottom = 36.0 D [26/Jan/2017:11:24:21 +0100] [Job 1215] PageWidth = 595.0, PageLength = 842.0 D [26/Jan/2017:11:24:21 +0100] [Job 1215] Found: %%EndSetup D [26/Jan/2017:11:24:21 +0100] [Job 1215] Inserting option code into "Setup" section. D [26/Jan/2017:11:24:21 +0100] [Job 1215] ----------- D [26/Jan/2017:11:24:21 +0100] [Job 1215] New page: %%Page: 1 1 D [26/Jan/2017:11:24:21 +0100] [Job 1215] Found: %%BeginPageSetup D [26/Jan/2017:11:24:21 +0100] [Job 1215] Inserting option code into "PageSetup" section. D [26/Jan/2017:11:24:21 +0100] [Job 1215] Copying page 2... D [26/Jan/2017:11:24:21 +0100] [Job 1215] pagew = 559.0, pagel = 770.0 D [26/Jan/2017:11:24:21 +0100] [Job 1215] bboxx = 0, bboxy = 0, bboxw = 595, bboxl = 842 D [26/Jan/2017:11:24:21 +0100] [Job 1215] PageLeft = 18.0, PageRight = 577.0 D [26/Jan/2017:11:24:21 +0100] [Job 1215] PageTop = 806.0, PageBottom = 36.0 D [26/Jan/2017:11:24:21 +0100] [Job 1215] PageWidth = 595.0, PageLength = 842.0 D [26/Jan/2017:11:24:21 +0100] [Job 1215] New page found but previous not printed, print it now. D [26/Jan/2017:11:24:21 +0100] [Job 1215] Found: %%Page: 2 2 D [26/Jan/2017:11:24:21 +0100] [Job 1215] --> Output goes directly to the renderer now. D [26/Jan/2017:11:24:21 +0100] [Job 1215] Copying page 3... D [26/Jan/2017:11:24:21 +0100] [Job 1215] pagew = 559.0, pagel = 770.0 D [26/Jan/2017:11:24:21 +0100] [Job 1215] bboxx = 0, bboxy = 0, bboxw = 595, bboxl = 842 D [26/Jan/2017:11:24:21 +0100] [Job 1215] PageLeft = 18.0, PageRight = 577.0 D [26/Jan/2017:11:24:21 +0100] [Job 1215] PageTop = 806.0, PageBottom = 36.0 D [26/Jan/2017:11:24:21 +0100] [Job 1215] PageWidth = 595.0, PageLength = 842.0 D [26/Jan/2017:11:24:21 +0100] [Job 1215] PID 22948 (pdftops) exited with no errors. D [26/Jan/2017:11:24:21 +0100] [Job 1215] Starting renderer with command: "cat" D [26/Jan/2017:11:24:21 +0100] [Job 1215] Starting process "kid3" (generation 1) D [26/Jan/2017:11:24:21 +0100] [Job 1215] Starting process "kid4" (generation 2) D [26/Jan/2017:11:24:21 +0100] [Job 1215] Starting process "renderer" (generation 2) D [26/Jan/2017:11:24:21 +0100] [Job 1215] JCL: %-12345X@PJL D [26/Jan/2017:11:24:21 +0100] [Job 1215] <job data> D [26/Jan/2017:11:24:21 +0100] [Job 1215] Connecting to printserver1.swabian.net:631 I [26/Jan/2017:11:24:21 +0100] [Job 1215] Connecting to printer. D [26/Jan/2017:11:24:21 +0100] cupsdMarkDirty(---J-) D [26/Jan/2017:11:24:21 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files" D [26/Jan/2017:11:24:21 +0100] [Job 1215] Set job-printer-state-message to "Connecting to printer.", current level=INFO D [26/Jan/2017:11:24:21 +0100] Discarding unused job-progress event... D [26/Jan/2017:11:24:21 +0100] Discarding unused printer-state-changed event... D [26/Jan/2017:11:24:21 +0100] [Job 1215] update_reasons(attr=0(), s="-cups-certificate-error") D [26/Jan/2017:11:24:21 +0100] [Job 1215] update_reasons(attr=0(), s="-connecting-to-device") D [26/Jan/2017:11:24:21 +0100] [Job 1215] STATE: -connecting-to-device D [26/Jan/2017:11:24:21 +0100] cupsdMarkDirty(---J-) D [26/Jan/2017:11:24:21 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Dirty files" I [26/Jan/2017:11:24:21 +0100] [Job 1215] Connected to printer. D [26/Jan/2017:11:24:21 +0100] cupsdMarkDirty(---J-) D [26/Jan/2017:11:24:21 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files" D [26/Jan/2017:11:24:21 +0100] [Job 1215] Set job-printer-state-message to "Connected to printer.", current level=INFO D [26/Jan/2017:11:24:21 +0100] [Job 1215] Connected to 172.18.0.41:631... D [26/Jan/2017:11:24:21 +0100] [Job 1215] Getting supported attributes... D [26/Jan/2017:11:24:21 +0100] Discarding unused job-progress event... D [26/Jan/2017:11:24:21 +0100] Discarding unused printer-state-changed event... D [26/Jan/2017:11:24:21 +0100] [Job 1215] Get-Printer-Attributes: server-error-version-not-supported (server-error-version-not-supported) D [26/Jan/2017:11:24:21 +0100] [Job 1215] Get-Printer-Attributes returned server-error-version-not-supported. I [26/Jan/2017:11:24:21 +0100] [Job 1215] Preparing to print. D [26/Jan/2017:11:24:21 +0100] cupsdMarkDirty(---J-) D [26/Jan/2017:11:24:21 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files" D [26/Jan/2017:11:24:21 +0100] [Job 1215] Set job-printer-state-message to "Preparing to print.", current level=INFO D [26/Jan/2017:11:24:21 +0100] [Job 1215] The printer does not support IPP/2.0, trying IPP/1.1. D [26/Jan/2017:11:24:21 +0100] Discarding unused job-progress event... D [26/Jan/2017:11:24:21 +0100] Discarding unused printer-state-changed event... D [26/Jan/2017:11:24:21 +0100] [Job 1215] Getting supported attributes... D [26/Jan/2017:11:24:21 +0100] [Job 1215] Get-Printer-Attributes: successful-ok-ignored-or-substituted-attributes (successful-ok-ignored-or-substituted-attributes) D [26/Jan/2017:11:24:21 +0100] [Job 1215] document-format-supported (1 values) D [26/Jan/2017:11:24:21 +0100] [Job 1215] [0] = "application/octet-stream" D [26/Jan/2017:11:24:21 +0100] [Job 1215] operations-supported (7 values) D [26/Jan/2017:11:24:21 +0100] [Job 1215] [0] = Print-Job D [26/Jan/2017:11:24:21 +0100] [Job 1215] [1] = Validate-Job D [26/Jan/2017:11:24:21 +0100] [Job 1215] [2] = Purge-Jobs D [26/Jan/2017:11:24:21 +0100] [Job 1215] [3] = Cancel-Job D [26/Jan/2017:11:24:21 +0100] [Job 1215] [4] = Get-Job-Attributes D [26/Jan/2017:11:24:21 +0100] [Job 1215] [5] = Get-Jobs D [26/Jan/2017:11:24:21 +0100] [Job 1215] [6] = Get-Printer-Attributes D [26/Jan/2017:11:24:21 +0100] [Job 1215] update_reasons(attr=1(none-report), s="(null)") D [26/Jan/2017:11:24:21 +0100] [Job 1215] STATE: -none D [26/Jan/2017:11:24:21 +0100] [Job 1215] final_content_type="application/vnd.cups-pdf", document_format="application/octet-stream" D [26/Jan/2017:11:24:21 +0100] [Job 1215] Validate-Job IPP/1.1 D [26/Jan/2017:11:24:21 +0100] [Job 1215] printer-uri="ipp://printserver1.swabian.net:631/LPT2" D [26/Jan/2017:11:24:21 +0100] [Job 1215] requesting-user-name="root" D [26/Jan/2017:11:24:21 +0100] [Job 1215] job-name="1215 - (stdin)" D [26/Jan/2017:11:24:21 +0100] [Job 1215] document-format="application/octet-stream" D [26/Jan/2017:11:24:21 +0100] [Job 1215] Adding all operation/job attributes. D [26/Jan/2017:11:24:21 +0100] [Job 1215] IPP/1.1 Validate-Job #3 D [26/Jan/2017:11:24:21 +0100] [Job 1215] ---- operation-attributes-tag ---- D [26/Jan/2017:11:24:21 +0100] [Job 1215] attributes-charset charset utf-8 D [26/Jan/2017:11:24:21 +0100] [Job 1215] attributes-natural-language naturalLanguage en-us D [26/Jan/2017:11:24:21 +0100] [Job 1215] printer-uri uri ipp://printserver1.swabian.net:631/LPT2 D [26/Jan/2017:11:24:21 +0100] [Job 1215] requesting-user-name nameWithoutLanguage root D [26/Jan/2017:11:24:21 +0100] [Job 1215] job-name nameWithoutLanguage 1215 - (stdin) D [26/Jan/2017:11:24:21 +0100] [Job 1215] document-format mimeMediaType application/octet-stream D [26/Jan/2017:11:24:21 +0100] [Job 1215] ---- job-attributes-tag ---- D [26/Jan/2017:11:24:21 +0100] [Job 1215] finishings enum none D [26/Jan/2017:11:24:21 +0100] [Job 1215] job-originating-host-name nameWithoutLanguage localhost D [26/Jan/2017:11:24:21 +0100] [Job 1215] job-uuid uri urn:uuid:3542e92d-aae6-34f7-5b1c-1ff7d9d7a9da D [26/Jan/2017:11:24:21 +0100] [Job 1215] number-up integer 1 D [26/Jan/2017:11:24:21 +0100] [Job 1215] ---- end-of-attributes-tag ---- D [26/Jan/2017:11:24:21 +0100] [Job 1215] Validate-Job: successful-ok-ignored-or-substituted-attributes (successful-ok-ignored-or-substituted-attributes) D [26/Jan/2017:11:24:21 +0100] [Job 1215] Print-Job IPP/1.1 D [26/Jan/2017:11:24:21 +0100] [Job 1215] printer-uri="ipp://printserver1.swabian.net:631/LPT2" D [26/Jan/2017:11:24:21 +0100] [Job 1215] requesting-user-name="root" D [26/Jan/2017:11:24:21 +0100] [Job 1215] job-name="1215 - (stdin)" D [26/Jan/2017:11:24:21 +0100] [Job 1215] document-format="application/octet-stream" D [26/Jan/2017:11:24:21 +0100] [Job 1215] Adding all operation/job attributes. D [26/Jan/2017:11:24:21 +0100] [Job 1215] IPP/1.1 Print-Job #5 D [26/Jan/2017:11:24:21 +0100] [Job 1215] ---- operation-attributes-tag ---- D [26/Jan/2017:11:24:21 +0100] [Job 1215] attributes-charset charset utf-8 D [26/Jan/2017:11:24:21 +0100] [Job 1215] attributes-natural-language naturalLanguage en-us D [26/Jan/2017:11:24:21 +0100] [Job 1215] printer-uri uri ipp://printserver1.swabian.net:631/LPT2 D [26/Jan/2017:11:24:21 +0100] [Job 1215] requesting-user-name nameWithoutLanguage root D [26/Jan/2017:11:24:21 +0100] [Job 1215] job-name nameWithoutLanguage 1215 - (stdin) D [26/Jan/2017:11:24:21 +0100] [Job 1215] document-format mimeMediaType application/octet-stream D [26/Jan/2017:11:24:21 +0100] [Job 1215] document-format mimeMediaType application/octet-stream D [26/Jan/2017:11:24:21 +0100] [Job 1215] ---- job-attributes-tag ---- D [26/Jan/2017:11:24:21 +0100] [Job 1215] finishings enum none D [26/Jan/2017:11:24:21 +0100] [Job 1215] job-originating-host-name nameWithoutLanguage localhost D [26/Jan/2017:11:24:21 +0100] [Job 1215] job-uuid uri urn:uuid:3542e92d-aae6-34f7-5b1c-1ff7d9d7a9da D [26/Jan/2017:11:24:21 +0100] [Job 1215] number-up integer 1 D [26/Jan/2017:11:24:21 +0100] [Job 1215] ---- end-of-attributes-tag ---- D [26/Jan/2017:11:24:21 +0100] [Job 1215] Sending file using HTTP/1.1 chunking... D [26/Jan/2017:11:24:21 +0100] [Job 1215] update_reasons(attr=1(none-report), s="(null)") D [26/Jan/2017:11:24:21 +0100] [Job 1215] Get-Printer-Attributes: successful-ok-ignored-or-substituted-attributes (successful-ok-ignored-or-substituted-attributes) D [26/Jan/2017:11:24:21 +0100] [Job 1215] (monitor) Get-Jobs: successful-ok-ignored-or-substituted-attributes (successful-ok-ignored-or-substituted-attributes) D [26/Jan/2017:11:24:21 +0100] [Job 1215] (monitor) job-state=pending D [26/Jan/2017:11:24:22 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:22 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:22 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:22 +0100] [Job 1215] update_reasons(attr=1(none-report), s="(null)") D [26/Jan/2017:11:24:22 +0100] [Job 1215] Get-Printer-Attributes: successful-ok-ignored-or-substituted-attributes (successful-ok-ignored-or-substituted-attributes) D [26/Jan/2017:11:24:22 +0100] [Job 1215] (monitor) Get-Job-Attributes: successful-ok-ignored-or-substituted-attributes (successful-ok-ignored-or-substituted-attributes) D [26/Jan/2017:11:24:22 +0100] [Job 1215] (monitor) job-state=pending D [26/Jan/2017:11:24:22 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:22 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:22 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:22 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:22 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:22 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:22 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:22 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:22 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:22 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:22 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:23 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:23 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:23 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:23 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:23 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:23 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:23 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:23 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:23 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:23 +0100] [Job 1215] ----------- D [26/Jan/2017:11:24:23 +0100] [Job 1215] New page: %%Page: 2 2 D [26/Jan/2017:11:24:23 +0100] [Job 1215] Found: %%Page: 2 2 D [26/Jan/2017:11:24:23 +0100] [Job 1215] --> Output goes to the FIFO buffer now. D [26/Jan/2017:11:24:23 +0100] [Job 1215] Found: %%BeginPageSetup D [26/Jan/2017:11:24:23 +0100] [Job 1215] Inserting option code into "PageSetup" section. D [26/Jan/2017:11:24:23 +0100] [Job 1215] Copying page 4... D [26/Jan/2017:11:24:23 +0100] [Job 1215] pagew = 559.0, pagel = 770.0 D [26/Jan/2017:11:24:23 +0100] [Job 1215] bboxx = 0, bboxy = 0, bboxw = 595, bboxl = 842 D [26/Jan/2017:11:24:23 +0100] [Job 1215] PageLeft = 18.0, PageRight = 577.0 D [26/Jan/2017:11:24:23 +0100] [Job 1215] PageTop = 806.0, PageBottom = 36.0 D [26/Jan/2017:11:24:23 +0100] [Job 1215] PageWidth = 595.0, PageLength = 842.0 D [26/Jan/2017:11:24:23 +0100] [Job 1215] Wrote 4 pages... D [26/Jan/2017:11:24:23 +0100] [Job 1215] New page found but previous not printed, print it now. D [26/Jan/2017:11:24:23 +0100] [Job 1215] Found: %%Page: 3 3 D [26/Jan/2017:11:24:23 +0100] [Job 1215] --> Output goes directly to the renderer now. D [26/Jan/2017:11:24:23 +0100] [Job 1215] ----------- D [26/Jan/2017:11:24:23 +0100] [Job 1215] New page: %%Page: 3 3 D [26/Jan/2017:11:24:23 +0100] [Job 1215] Found: %%Page: 3 3 D [26/Jan/2017:11:24:23 +0100] [Job 1215] --> Output goes to the FIFO buffer now. D [26/Jan/2017:11:24:23 +0100] [Job 1215] Found: %%BeginPageSetup D [26/Jan/2017:11:24:23 +0100] [Job 1215] Inserting option code into "PageSetup" section. D [26/Jan/2017:11:24:23 +0100] [Job 1215] PID 22949 (pstops) exited with no errors. D [26/Jan/2017:11:24:23 +0100] [Job 1215] New page found but previous not printed, print it now. D [26/Jan/2017:11:24:23 +0100] [Job 1215] Found: %%Page: 4 4 D [26/Jan/2017:11:24:23 +0100] [Job 1215] --> Output goes directly to the renderer now. D [26/Jan/2017:11:24:23 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:23 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:23 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:23 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:23 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:23 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:23 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:23 +0100] [Job 1215] ----------- D [26/Jan/2017:11:24:23 +0100] [Job 1215] New page: %%Page: 4 4 D [26/Jan/2017:11:24:23 +0100] [Job 1215] Found: %%Page: 4 4 D [26/Jan/2017:11:24:23 +0100] [Job 1215] --> Output goes to the FIFO buffer now. D [26/Jan/2017:11:24:23 +0100] [Job 1215] Found: %%BeginPageSetup D [26/Jan/2017:11:24:23 +0100] [Job 1215] Inserting option code into "PageSetup" section. D [26/Jan/2017:11:24:23 +0100] [Job 1215] Flushing FIFO. D [26/Jan/2017:11:24:23 +0100] [Job 1215] Closing renderer D [26/Jan/2017:11:24:23 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:23 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:23 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:23 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:23 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:23 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:23 +0100] [Job 1215] renderer exited with status 0 D [26/Jan/2017:11:24:23 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:23 +0100] [Job 1215] update_reasons(attr=1(none-report), s="(null)") D [26/Jan/2017:11:24:23 +0100] [Job 1215] Get-Printer-Attributes: successful-ok-ignored-or-substituted-attributes (successful-ok-ignored-or-substituted-attributes) D [26/Jan/2017:11:24:23 +0100] [Job 1215] (monitor) Get-Job-Attributes: successful-ok-ignored-or-substituted-attributes (successful-ok-ignored-or-substituted-attributes) D [26/Jan/2017:11:24:23 +0100] [Job 1215] (monitor) job-state=completed D [26/Jan/2017:11:24:23 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:23 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:23 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:23 +0100] [Job 1215] kid4 exited with status 0 D [26/Jan/2017:11:24:23 +0100] [Job 1215] kid3 finished D [26/Jan/2017:11:24:23 +0100] [Job 1215] kid3 exited with status 0 D [26/Jan/2017:11:24:23 +0100] [Job 1215] pdf-to-ps exited with status 0 D [26/Jan/2017:11:24:23 +0100] [Job 1215] Closing foomatic-rip. D [26/Jan/2017:11:24:23 +0100] [Job 1215] PID 22944 (/usr/lib/cups/filter/foomatic-rip) exited with no errors. D [26/Jan/2017:11:24:23 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:23 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:23 +0100] [Job 1215] Read 16384 bytes... D [26/Jan/2017:11:24:23 +0100] [Job 1215] Read 10818 bytes... D [26/Jan/2017:11:24:23 +0100] [Job 1215] Print-Job: successful-ok-ignored-or-substituted-attributes (successful-ok-ignored-or-substituted-attributes) D [26/Jan/2017:11:24:23 +0100] [Job 1215] Print job accepted - job ID 33554541. I [26/Jan/2017:11:24:23 +0100] [Job 1215] Waiting for job to complete. D [26/Jan/2017:11:24:23 +0100] cupsdMarkDirty(---J-) D [26/Jan/2017:11:24:23 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files" D [26/Jan/2017:11:24:23 +0100] [Job 1215] Set job-printer-state-message to "Waiting for job to complete.", current level=INFO D [26/Jan/2017:11:24:23 +0100] Discarding unused job-progress event... D [26/Jan/2017:11:24:23 +0100] Discarding unused printer-state-changed event... D [26/Jan/2017:11:24:23 +0100] [Job 1215] update_reasons(attr=1(none-report), s="(null)") D [26/Jan/2017:11:24:23 +0100] [Job 1215] Get-Printer-Attributes: successful-ok-ignored-or-substituted-attributes (successful-ok-ignored-or-substituted-attributes) D [26/Jan/2017:11:24:23 +0100] [Job 1215] Get-Job-Attributes: successful-ok-ignored-or-substituted-attributes (successful-ok-ignored-or-substituted-attributes) D [26/Jan/2017:11:24:23 +0100] [Job 1215] update_reasons(attr=1(none-report), s="(null)") D [26/Jan/2017:11:24:23 +0100] [Job 1215] Get-Printer-Attributes: successful-ok-ignored-or-substituted-attributes (successful-ok-ignored-or-substituted-attributes) D [26/Jan/2017:11:24:23 +0100] [Job 1215] ATTR: auth-info-required=none D [26/Jan/2017:11:24:23 +0100] load_ppd: Loading /var/cache/cups/E360d.data... D [26/Jan/2017:11:24:23 +0100] cupsdRegisterPrinter(p=0x557750f23ed0(E360d)) D [26/Jan/2017:11:24:23 +0100] Registering "Lexmark E360d Foomatic/Postscript @ alpha" with DNS-SD type "_printer._tcp". D [26/Jan/2017:11:24:23 +0100] Registering "Lexmark E360d Foomatic/Postscript @ alpha" with DNS-SD type "_ipps._tcp". D [26/Jan/2017:11:24:23 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" printer-type=0x80B01E D [26/Jan/2017:11:24:23 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" printer-state=4 D [26/Jan/2017:11:24:23 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" Duplex=T D [26/Jan/2017:11:24:23 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" Color=T D [26/Jan/2017:11:24:23 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" TLS=1.2 D [26/Jan/2017:11:24:23 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" UUID=e65febf1-6c2d-37ec-515f-8223cbcaa78c D [26/Jan/2017:11:24:23 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" pdl=application/octet-stream,application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster D [26/Jan/2017:11:24:23 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" product=(Lexmark E360dn) D [26/Jan/2017:11:24:23 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" priority=0 D [26/Jan/2017:11:24:23 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" adminurl=https://alpha.local:631/printers/E360d D [26/Jan/2017:11:24:23 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" ty=Unknown D [26/Jan/2017:11:24:23 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" rp=printers/E360d D [26/Jan/2017:11:24:23 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" qtotal=1 D [26/Jan/2017:11:24:23 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" txtvers=1 D [26/Jan/2017:11:24:23 +0100] Registering "Lexmark E360d Foomatic/Postscript @ alpha" with DNS-SD type "_ipp._tcp". D [26/Jan/2017:11:24:23 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" printer-type=0x80B01E D [26/Jan/2017:11:24:23 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" printer-state=4 D [26/Jan/2017:11:24:23 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" Duplex=T D [26/Jan/2017:11:24:23 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" Color=T D [26/Jan/2017:11:24:23 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" TLS=1.2 D [26/Jan/2017:11:24:23 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" UUID=e65febf1-6c2d-37ec-515f-8223cbcaa78c D [26/Jan/2017:11:24:23 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" pdl=application/octet-stream,application/pdf,application/postscript,image/jpeg,image/png,image/pwg-raster D [26/Jan/2017:11:24:23 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" product=(Lexmark E360dn) D [26/Jan/2017:11:24:23 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" priority=0 D [26/Jan/2017:11:24:23 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" adminurl=https://alpha.local:631/printers/E360d D [26/Jan/2017:11:24:23 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" ty=Unknown D [26/Jan/2017:11:24:23 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" rp=printers/E360d D [26/Jan/2017:11:24:23 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" qtotal=1 D [26/Jan/2017:11:24:23 +0100] DNS_SD "Lexmark E360d Foomatic/Postscript @ alpha" txtvers=1 D [26/Jan/2017:11:24:23 +0100] cupsdMarkDirty(P----) D [26/Jan/2017:11:24:23 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files" D [26/Jan/2017:11:24:23 +0100] [Job 1215] PID 22945 (/usr/lib/cups/backend/ipp) exited with no errors. D [26/Jan/2017:11:24:23 +0100] [Job 1215] time-at-completed=1485426263 D [26/Jan/2017:11:24:23 +0100] Discarding unused job-completed event... I [26/Jan/2017:11:24:23 +0100] [Job 1215] Job completed. D [26/Jan/2017:11:24:23 +0100] cupsdMarkDirty(---J-) D [26/Jan/2017:11:24:23 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files" D [26/Jan/2017:11:24:23 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files" D [26/Jan/2017:11:24:23 +0100] Discarding unused printer-state-changed event... D [26/Jan/2017:11:24:23 +0100] cupsdMarkDirty(---J-) D [26/Jan/2017:11:24:23 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files" D [26/Jan/2017:11:24:24 +0100] [Job 1215] Unloading... the ppd used is also original: # rpm -qf /usr/share/cups/model/OpenPrintingPPDs/postscript/Lexmark-E360d.Postscript.ppd.gz OpenPrintingPPDs-postscript-4.0.0.2-4.1.noarch and finally the postscript data (at least the beginning): %!PS-Adobe-3.0 %Produced by poppler pdftops version: 0.43.0 (http://poppler.freedesktop.org) %%Creator: texttopdf/1.8.2 %%LanguageLevel: 3 %%DocumentSuppliedResources: (atend) %%DocumentMedia: A4 595 842 0 () () %%For: (root) %%Title: (stdin) %RBINumCopies: 1 %%Pages: (atend) %%BoundingBox: (atend) %%EndComments %%BeginProlog %%BeginResource: procset xpdf 3.00 0 %%Copyright: Copyright 1996-2011 Glyph & Cog, LLC /xpdf 75 dict def xpdf begin % PDF special state /pdfDictSize 15 def /pdfSetup { /setpagedevice where { pop 2 dict begin /Policies 1 dict dup begin /PageSize 6 def end def { /Duplex true def } if currentdict end setpagedevice } { pop } ifelse } def /pdfSetupPaper { % Change paper size, but only if different from previous paper size otherwise % duplex fails. PLRM specifies a tolerance of 5 pts when matching paper size % so we use the same when checking if the size changes. /setpagedevice where { pop currentpagedevice /PageSize known { 2 copy currentpagedevice /PageSize get aload pop exch 4 1 roll sub abs 5 gt 3 1 roll sub abs 5 gt or } { true } ifelse { 2 array astore 2 dict begin /PageSize exch def /ImagingBBox null def currentdict end setpagedevice } { pop pop } ifelse } { pop } ifelse } def /pdfStartPage { pdfDictSize dict begin /pdfFillCS [] def /pdfFillXf?Xc dfLastStroke false def } def /SC { pdfLastStroke not { pdfStrokeCS setcolorspace } if dup /pdfStroke exch def aload pop pdfStrokeXform setcolor /pdfLastStroke true def /pdfLastFill false def } def /op { /pdfFillOP exch def pdfLastFill { pdfFillOP setoverprint } if } def /OP { /pdfStrokeOP exch def pdfLastStroke { pdfStrokeOP setoverprint } if } def /fCol { pdfLastFill not { pdfFillCS setcolorspace pdfFill aload pop pdfFillXform setcolor pdfFillOP setoverprint /pdfLastFill true def /pdfLastStroke false def } if } def /sCol?X c pop } ifelse } forall /Encoding exch def currentdict end definefont pop } def /pdfMakeFont16 { exch findfont dup length dict begin { 1 index /FID ne { def } { pop pop } ifelse } forall /WMode exch def currentdict end definefont pop } def /pdfMakeFont16L3 { 1 index /CIDFont resourcestatus { pop pop 1 index /CIDFont findresource /CIDFontType known } { false } ifelse { 0 eq { /Identity-H } { /Identity-V } ifelse exch 1 array astore composefont pop } { pdfMakeFont16 } ifelse } def % graphics state operators /q { gsave pdfDictSize dict begin } def /Q { end grestore /pdfLastFill where { pop pdfLastFill { pdfFillOP setoverprint } { pdfStrokeOP setoverprint } ifelse } if /pdfOPM where { pop pdfOPM /setoverprintmode where{pop setoverprintmode}{pop}ifelse } if } def /cm { concat } def /d { setdash } def /i { setflat } def /j { setlinejoin } def /J { setlinecap } def /M { setmiterlimit } def /w { setlinewidth } def % path segment operators /m { moveto } def /l { lineto } def /c { curveto } def /re { 4 2 ro?X2c g exch def } def % text positioning operators /Td { pdfTextMat transform moveto } def /Tm { /pdfTextMat exch def } def % text string operators /xyshow where { pop /xyshow2 { dup length array 0 2 2 index length 1 sub { 2 index 1 index 2 copy get 3 1 roll 1 add get pdfTextMat dtransform 4 2 roll 2 copy 6 5 roll put 1 add 3 1 roll dup 4 2 roll put } for exch pop xyshow } def }{ /xyshow2 { currentfont /FontType get 0 eq { 0 2 3 index length 1 sub { currentpoint 4 index 3 index 2 getinterval show moveto 2 copy get 2 index 3 2 roll 1 add get pdfTextMat dtransform rmoveto } for } { 0 1 3 index length 1 sub { currentpo?XJc p } def } ifelse /cshow where { pop /xycp { 0 3 2 roll { pop pop currentpoint 3 2 roll 1 string dup 0 4 3 roll put false charpath moveto 2 copy get 2 index 2 index 1 add get pdfTextMat dtransform rmoveto 2 add } exch cshow pop pop } def }{ /xycp { currentfont /FontType get 0 eq { 0 2 3 index length 1 sub { currentpoint 4 index 3 index 2 getinterval false charpath moveto 2 copy get 2 index 3 2 roll 1 add get pdfTextMat dtransform rmoveto } for } { 0 1 3 index length 1 sub { currentpoint 4 index 3 index 1 getinterval false charpath moveto 2 copy 2 mul get 2 index 3 2 roll 2 mul 1 add get pdfTextMat dtransform rmoveto } for } ifelse pop pop } def } ifelse /Tj { fCol 0 pdfTextRise pdfTextMat dtransform rmoveto currentpoint 4 2 roll pdfTextRender 1 and 0 eq { 2 copy xyshow2 } if pdfTextRender 3 and dup 1 eq exch 2 eq or { 3 index 3 index moveto 2 copy currentfont /FontType get 3 eq { fCol } { sCol } ifelse xycp currentpoint stroke moveto } if pdfTextRender 4 and 0 ne { 4 2 roll moveto xycp /pdfTextClipPath [ pdfTextClipPath aload pop {/moveto cvx} {/lineto cvx} {/?X^c perators /pdfImBuf 100 string def /pdfImStr { 2 copy exch length lt { 2 copy get exch 1 add exch } { () } ifelse } def /skipEOD { { currentfile pdfImBuf readline not { pop exit } if (%-EOD-) eq { exit } if } loop } def /pdfIm { image skipEOD } def /pdfMask { /ReusableStreamDecode filter skipEOD /maskStream exch def } def /pdfMaskEnd { maskStream closefile } def /pdfMaskInit { /maskArray exch def /maskIdx 0 def } def /pdfMaskSrc { maskIdx maskArray length lt { maskArray maskIdx get /maskIdx maskIdx 1 add def } { () } ifelse } def /pdfImM { fCol imagemask skipEOD } def /pr { 2 index 2 index 3 2 roll putinterval 4 add } def /pdfImClip { gsave 0 2 4 index length 1 sub { dup 4 index exch 2 copy get 5 index div put 1 add 3 index exch 2 copy get 3 index div put } for pop pop rectclip } def /pdfImClipEnd { grestor?X?c ?Prk? funcCol sc dup 4 index exch mat transform m 3 index 3 index mat transform l 1 index 3 index mat transform l mat transform l pop pop h f* } ifelse } def /axialCol { dup 0 lt { pop t0 } { dup 1 gt { pop t1 } { dt mul t0 add } ifelse } ifelse func n array astore } def /axialSH { dup 0 eq { true } { dup 8 eq { false } { 2 index axialCol 2 index axialCol colordelta } ifelse } ifelse { 1 add 3 1 roll 2 copy add 0.5 mul?X?c l yMin sub dy mul dx div add yMin l h f* } { exch 2 copy xMin sub dx mul dy div add xMin exch m xMax sub dx mul dy div add xMax exch l exch 2 copy xMax sub dx mul dy div add xMax exch l xMin sub dx mul dy div add xMin exch l h f* } ifelse } ifelse } def /radialCol { dup t0 lt { pop t0 } { dup t1 gt { pop t1 } if } ifelse func n array astore } def /radialSH { dup 0 eq { true } { dup 8 eq { false } { 2 index dt mul t0 add radialCol 2 index dt mul t0 add radialCol colordelta } ifelse } ifelse { 1 add 3 1 roll 2 copy add 0.5 mul dup 4 3 roll exch 4 index radialSH exch 3 2 roll radialSH } { pop 2 copy add 0.5 mul dt mul t0 add radialCol sc encl { exch dup dx mul x0 add exch dup dy mul y0 add exch dr mul r0 add 0 360 arc h dup dx mul x0 add exch dup dy mul y0 add exch dr mul r0 add 360 0 arcn h f } { 2 copy dup dx mul x0 add exch dup dy mul y0 add exch dr mul r0 add a1 a2 arcn dup dx mul x0?X?c p defineresource pop end 10 dict begin begincmap /CMapType 1 def /CMapName /Identity-V def /CIDSystemInfo 3 dict dup begin /Registry (Adobe) def /Ordering (Identity) def /Supplement 0 def end def /WMode 1 def 1 begincodespacerange <0000> <ffff> endcodespacerange 0 usefont 1 begincidrange <0000> <ffff> 0 endcidrange endcmap currentdict CMapName exch /CMap defineresource pop end end %%EndProlog %%BeginSetup % Disable CTRL-D as an end-of-file marker... userdict dup(\004)cvn{}put (\004\004)cvn{}put [{ %%BeginFeature: *Resolution 600x600dpi <</HWResolution[600 600]>>setpagedevice %%EndFeature } stopped cleartomark [{ %%BeginFeature: *PageSize A4 <</PageSize[595 842]/ImagingBBox null>>setpagedevice %%EndFeature } stopped cleartoma?X.i ose <</ManualFeed false /MediaPosition 3>>setpagedevice %%EndFeature } stopped cleartomark [{ %%BeginFeature: *Duplex None <</Duplex false>>setpagedevice %%EndFeature } stopped cleartomark % x y w h ESPrc - Clip to a rectangle. userdict/ESPrc/rectclip where{pop/rectclip load} {{newpath 4 2 roll moveto 1 index 0 rlineto 0 exch rlineto neg 0 rlineto closepath clip newpath}bind}ifelse put % x y w h ESPrf - Fill a rectangle. userdict/ESPrf/rectfill where{pop/rectfill load} {{gsave newpath 4 2 roll moveto 1 index 0 rlineto 0 exch rlineto neg 0 rlineto closepath fill grestore}bind}ifelse put % x y w h ESPrs - Stroke a rectangle. userdict/ESPrs/rectstroke where{pop/rectstroke load} {{gsave newpath 4 2 roll moveto 1 index 0 rlineto 0 exch rlineto neg 0 rlineto closepath stroke grestore}bind}ifelse put userdict/ESPwl{}bind put xpdf begin %%BeginResource: font SourceCodePro-Bold /CIDInit /ProcSet findresource begin 20 dict begin /CIDFontName /SourceCodePro-Bold def /CIDFontType 0 def /CIDSystemInfo 3 dict dup begin /Registry (Adobe) def /Ordering (Identity) def /Supplement 0 def end def /FontMatrix [0.001 0 0 0.001 0 0] def /FontBBox [-208 -400 808 1060] def /FontInfo 1 dict dup begin /FSType 8 def end def /CIDCount 1549 def /FDBytes 1 def /GDBytes 3 def /CIDMapOffset 0 def /FDArray 1 array dup 0 10 dict begin /FontType 1 def /FontMatrix [1 0 0 1 0 0] def /PaintType 0 def /Private 32 dict begin /B?Xpi 01c0c00001c7900001cbe00001d1a 00001d6c00001df100001e4f00001ecb00001efa00001f43 00001f7600001fed0000204f00002096000020cd00002135 00002195000021ec0000224c000022a900002303000023bb 00002410000024450000249a000024e00000252900002587 000025c40000261c0000267a000026d8000027140000278a 000027e60000282800002867000028de0000293c00002998 000029cf00002a3400002a9a00002b0d00002b8600002c16 00002c6600002ce500002d7500002e1000002e8200002ef3 00002f5000002fcd0000304c000030ca00003164000031f6 0000326e000032fe0000338c00003434000034d300003555 000035a60000360900003666000036d000003738000037c0 0000382d000038a8000039210000399f00003a0800003a5a 00003aa000003b1c00003b8000003bed00003c3c00003c8d 00003ceb00003d4800003da600003ddf00003e4900003e8f 00003eed00003f3400003fa0000040020000406c000040d5 0000415e000041da0000423c000042850000430700004397 00004432000044a400004523000045b100004618000046a6 0000472700004784000047e2000048290000487d000048d4 0000493500004981000049cf00004a2a00004a8d00004aec 00004b260000?Xox ...

1 0

[opensuse] Strange systemd behaviour on starting a service and asking for a password for LUKS.
by Carlos E. R. 26 Jan '17

26 Jan '17

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, When I try restart syslog, I get this prompt instead. Telcontar:~ # systemctl restart rsyslog.service Please enter passphrase for disk ST2000DM001-1CH1 (cr_other) on /data/other! Telcontar:~ # Telcontar:~ # grep cr_other /etc/crypttab cr_other /dev/disk/by-uuid/334b5f7a-cd23-4d0a-8899-a517e5c371a5 none noauto Telcontar:~ # Telcontar:~ # grep cr_other /etc/fstab /dev/mapper/cr_other /data/other xfs noauto,nofail,relatime 1 5 Telcontar:~ # There is no reason whatsoever to try to mount that partition unasked. And previously it asked for another partition. It is consistent: Telcontar:~ # rcsyslog restart redirecting to systemctl restart syslog.service Please enter passphrase for disk ST2000DM001-1CH1 (cr_other) on /data/other! Telcontar:~ # And it continues asking while typing other commands :-( The log has this: <3.6> 2017-01-07 05:00:44 Telcontar systemd 1 - - Stopping System Logging Service... <5.6> 2017-01-07 05:00:44 Telcontar rsyslogd - - - [origin software="rsyslogd" swVersion="8.4.0" x-pid="14313" x-info="http://www.rsyslog.com"] exiting on signal 15. <5.6> 2017-01-07 05:00:44 Telcontar rsyslogd - - - [origin software="rsyslogd" swVersion="8.4.0" x-pid="14654" x-info="http://www.rsyslog.com"] start <3.6> 2017-01-07 05:00:44 Telcontar systemd 1 - - Stopped System Logging Service. <3.6> 2017-01-07 05:00:44 Telcontar systemd 1 - - Starting System Logging Service... <3.6> 2017-01-07 05:00:44 Telcontar systemd 1 - - Started System Logging Service. <3.6> 2017-01-07 05:00:47 Telcontar systemd-cryptsetup 25297 - - Set cipher aes, mode xts-plain64, key size 512 bits for device /dev/disk/by-uuid/334b5f7a-cd23-4d0a-8899-a517e5c371a5. <3.4> 2017-01-07 05:00:48 Telcontar systemd-cryptsetup 25297 - - Invalid passphrase. <3.6> 2017-01-07 05:00:48 Telcontar systemd 1 - - Started Dispatch Password Requests to Console. - -- Cheers Carlos E. R. (from 13.1 x86_64 "Bottle" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEARECAAYFAlhwaHUACgkQtTMYHG2NR9WqOwCeMIwY8j3Jzg6cZOFgy4hF1by6 /pAAnRKOTTnMN1NX2a+E151lt7A9xwG3 =e1uQ -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 19

[opensuse] Taskbar in KDE
by stakanov 26 Jan '17

26 Jan '17

I have apparently a taskbar (empty) that sits in one account and I do not manage to close it. How is it possible to list all open taskbars in a user account under kde? Is there a kind of taskbar manager? Thank you. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 17

Re: [opensuse] Most stable openSUSE version for 64bit computer
by Mark Hounschell 26 Jan '17

26 Jan '17

You should have posted to the list. In any case.... On 01/24/2017 10:13 AM, stakanov wrote: > In data martedì 24 gennaio 2017 09:55:34, Mark Hounschell ha scritto: >> On 01/19/2017 07:18 PM, Carlos E. R. wrote: >>> On 2017-01-20 01:09, Anton Aylward wrote: >>>> On 01/19/2017 04:33 PM, stakanov wrote: >>>>> Sorry but this is senseless. 13.2 received yesterday the out of support >>>>> notice. It is deprecated and will not receive any updates or security >>>>> updates. So you better fix the problem you have instead of searching >>>>> for a new one.>> >>>> No, its not senseless. >>>> After all, there are many other repositories that can deal with updates >>>> anyway, ignoring the official ones. >>>> >>>> For example, I use the Kernel_Stable repository for my kernel updates >>>> rather than the official 13.2 repository. There also the Mozilla >>>> repository, language, LibreOffice and many more. >>> >>> All those repos will stop producing things for 13.2 in a matter of weeks >>> if not days. >>> >>> Sorry, but I also think that installing 13.2 now is senseless, except >>> for testing or proving a point. >> >> It's senseless unless you want a machine that JUST works. I will be >> using the repos described above for my 13.2 installations for the >> foreseeable future. >> >> I installed Leap 42.2 this morning and it was a nogo for me. >> >> First, in the expert partitioning, for every partition I setup (ext4) >> upon completion the partitioner barfed and spit out some message about >> debugging the problem (experts only) and had to reenter the expert >> partitioning for each partition I set up. Fortunately my settings were >> not lost and I was actually allowed to set them up as I did in 13.2. >> >> Then I noticed I could get to no virtual consoles during the install or >> even after the install was complete and at the graphical login screen. >> What's up with that? >> >> Then when I logged in I get a black screen with a mouse cursor. Mouse >> buttons do nothing and had no desktop at all. >> >> Come on. Install problems? Dead machine after install? IMHO, Leap should >> be more stable than this. It's like I was back in the SuSE 7.0 days. No >> thanks. >> >> Mark > > Well, maybe to tell you what happened, one would have to know: > Did you do an update or a fresh install with formatting root? Fresh install. Reformatting boot and root > Do you have an AMD graphics card? Nvidia? Intel? Nvidia > What is your RAM? 8GB > Did you read the release note? No > You can get virtual consoles any time, nothing changed from 13.2-42.1-42.2. My mistake here. I forgot the F-Lock key on this keyboard. > When you logged in..... > what desktop did you set to use? Default (Plasma 5) > Did you maintain the home? Yes but I login as root or user with same results. > Did you try to set up a new empty user to see if the problems were user > dependent (local settings) or if this is really a problem with the graphics > driver? > Just the root account. > Come on. Install problems? Dead machine after install because you run into > quirks with proprietary driver or because you do an update over two generations > (jumping right away 42.1). Yeap that can of course happen. > Black screen with a mouse coursor indicates more of a graphics problem > (probably plasma crashed). If you wait long enough it should come back all > alone (is the case since 42.1 that plasma once crashed generally autostarts. > Standard install. No proprietary drivers. I'm not here for help on this. There is nothing "senseless" about staying on 13.2 for the time being. If I need help with a _basic_ install of Leap on hardware that works on 13.2, I will stay with 13.2. The install was just an exercise to see where it is. Can I use this yet sort of thing. I'll try 42.3 when it arrives, but until then I'll be sticking with 13.2. Regards Mark -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

19 46

[opensuse] visa letter request
by Douglas DeMaio 26 Jan '17

26 Jan '17

For people planning to attend the openSUSE Conference who need a visa letter request, please contact me. Some non-European Union citizens may be required to visit an embassy and have a formed signed to receive a travel visa. If you plan on attending oSC17 from a non-EU country, please be sure to review http://www.auswaertiges-amt.de/EN/EinreiseUndAufenthalt/StaatenlisteVisumpf… to see if you are coming from a countries that requires a visa. Email ddemaio (at) opensuse.org for more information. You should compile the following information for the letter: Full Name (First, Middle, Last) Place of Employment Date you started with your employer Job Title Date of Birth Passport Number Passport Date of Issue Passport Date of Expiration Passport Place of Issue Dates of Travel oSC17 will be in Nuremberg, Germany, from May 26 to May 28. Please sign in and register for the event at https://events.opensuse.org. After your are registered, please consider submitting a talk. v/r Doug -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0