November 2016 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Turn off touch pad in 42.2
by James Knott 01 Dec '16

01 Dec '16

I have a ThinkPad E520 notebook computer. With earlier versions of openSUSE, I was able to disable the touch pad with a script in the .kde4/Autorun directory, which disabled the touch pad. This doesn't seem to work with 42.2. Even running it manually doesn't work. How do I turn off the #$%*&#$ touch pad??? The script contained: !/bin/sh synclient TouchpadOff=1 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 13

Re: [opensuse] Three Seconds
by Mark Misulich 30 Nov '16

30 Nov '16

On Tue, 2016-11-29 at 07:14 -0500, Mark Misulich wrote: > I have attached four dmesg -w outputs. 1. I disconnected the usb cable last night to be able to shut down the printer overnight. This output is before I reconnected the cable to the printer this morning. The power was shut off last night with the power button after I disconnected the usb cable. 2. After I reconnected the usb cable this morning, the printer started up automatically. This is the output. 3. In the three seconds after I used the power button to shut down the printer, this is the output before the printer restarted automatically. 4. This is the output after the printer restarted automatically.

5 18

[opensuse] Touchscreen question
by Koenraad Lelong 30 Nov '16

30 Nov '16

Hi, I have a POS system using Opensuse. I just got a touchscreen which has an "Elo TouchSystems, Inc. Elo TouchSystems IntelliTouch 2500U" touch-input-device. lsusb : Bus 002 Device 004: ID 04e7:0007 Elo TouchSystems 2500U IntelliTouch® Touchmonitor Interface The POS system is now running OS13.1. Since this version reached it's end of life, I was planning to install Leap 42.2 so I installed that on a spare PC to test. The touchscreen default has the X-axis reversed, so I used xinput set-prop 'Elo TouchSystems, Inc. Elo TouchSystems IntelliTouch 2500U' 'Evdev Axis Inversion' 1, 0 on the OS13.1 system. I added this to the end of /etc/X11/xinit/xinitrc.common.That works in the tests I did. Unfortunately, xinput on Leap42.2 seems to have a modified xinput (although the versions are the same : version 1.6.1), it does not have the "Evdev" properties. xinput list-props (on the "Leap" PC) shows this : xinput list-props 'Elo TouchSystems, Inc. Elo TouchSystems IntelliTouch 2500U' Device 'Elo TouchSystems, Inc. Elo TouchSystems IntelliTouch 2500U': Device Enabled (141): 1 Coordinate Transformation Matrix (143): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000 libinput Calibration Matrix (320): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000 libinput Calibration Matrix Default (321): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000 libinput Natural Scrolling Enabled (306): 0 libinput Natural Scrolling Enabled Default (307): 0 libinput Send Events Modes Available (285): 1, 0 libinput Send Events Mode Enabled (286): 0, 0 libinput Send Events Mode Enabled Default (287): 0, 0 libinput Left Handed Enabled (308): 0 libinput Left Handed Enabled Default (309): 0 libinput Scroll Methods Available (310): 0, 0, 1 libinput Scroll Method Enabled (311): 0, 0, 0 libinput Scroll Method Enabled Default (312): 0, 0, 0 libinput Button Scrolling Button (313): 0 libinput Button Scrolling Button Default (314): 0 Device Node (288): "/dev/input/event6" Device Product ID (289): 1255, 7 libinput Drag Lock Buttons (317): <no items> libinput Horizontal Scroll Enabled (290): 1 On the 13.1 system I get this : xinput list-props 'Elo TouchSystems, Inc. Elo TouchSystems IntelliTouch 2500U' Device 'Elo TouchSystems, Inc. Elo TouchSystems IntelliTouch 2500U': Device Enabled (114): 1 Coordinate Transformation Matrix (116): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000 Device Accel Profile (241): 0 Device Accel Constant Deceleration (242): 1.000000 Device Accel Adaptive Deceleration (243): 1.000000 Device Accel Velocity Scaling (244): 10.000000 Device Product ID (235): 1255, 7 Device Node (236): "/dev/input/event3" Evdev Axis Inversion (245): 1, 0 Evdev Axis Calibration (246): <no items> Evdev Axes Swap (247): 0 Axis Labels (248): "Abs X" (262), "Abs Y" (263), "Abs Misc" (264) Button Labels (249): "Button Left" (117), "Button Unknown" (238), "Button Unknown" (238), "Button Wheel Up" (120), "Button Wheel Down" (121) Evdev Middle Button Emulation (250): 0 Evdev Middle Button Timeout (251): 50 Evdev Third Button Emulation (252): 0 Evdev Third Button Emulation Timeout (253): 1000 Evdev Third Button Emulation Button (254): 3 Evdev Third Button Emulation Threshold (255): 20 Evdev Wheel Emulation (256): 0 Evdev Wheel Emulation Axes (257): 0, 0, 4, 5 Evdev Wheel Emulation Inertia (258): 10 Evdev Wheel Emulation Timeout (259): 200 Evdev Wheel Emulation Button (260): 4 Evdev Drag Lock Buttons (261): 0 Any suggestions what I can do ? TIA, Koenraad. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Three Seconds
by Mark Misulich 30 Nov '16

30 Nov '16

Hi, I upgraded to Leap 42.2 from 13.2 about a week ago by complete format and reinstall. But I didn't have time to install my printer and scanner since I had to leave to travel for work. Last night, I installed the scanner and the printer when I returned home from my trip. The scanner works great, but the printer isn't working properly. Specifically, the printer won't shut down and stay shut off. If I shut it off via the power button, the printer will turn on automatically after three seconds. I have tried to install the printer with three different drivers to see if that would fix the problem, but it doesn't. I uninstalled the printer in yast, and that didn't fix the problem even after a reboot. At present, I have no printer installed but it will start automatically when I boot Leap 42.2. If I try to shut the printer down, three seconds later it will power up again. The OS is Leap 42.2 with KDE Plasma 5.7. The printer is an HP Deskjet 970Cxi. Thanks in advance for your help. Mark -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 19

[opensuse] Building mldonkey locally
by Carlos E. R. 30 Nov '16

30 Nov '16

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, Package mkdonkey is not present in 42.2 packman. I have been told this is because "it fails to build with the newer ocaml". Thus I'm building it locally, a process that downloads and builds ocaml in the current directory, previous to building mldonkey itself. I suppose it downloads a definite version of ocaml, so there is no problem with the build. But there is a a missing feature: Core features: - zlib (required) enabled - threads enabled - bzip2 enabled - iconv enabled - libmagic enabled - upnp & natpmp disabled <== - graphical stats enabled - png support enabled - jpg support disabled I found that "libmagic" needs file-devel, and "graphical stats" needs "gd-devel". But I don't know what library is required to enable "upnp & natpmp". Any ideas? - -- Cheers Carlos E. R. (from 13.1 x86_64 "Bottle" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iEYEARECAAYFAlg9qYwACgkQtTMYHG2NR9VtbQCgiBMJYlaneGZ43Uyjw0H43Gk2 IeMAn0D5Z3CezrRRGnUbnFKysfLwZGAb =9yQ6 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 6

[opensuse] sddm startup question
by Lew Wolfgang 30 Nov '16

30 Nov '16

Hi Folks, I have a requirement to display a click-through warning banner on my desktops to require that console users acknowledge consent to be monitored. Before Leap and sddm I was able to add a phrase in /etc/X11/xdm/Xstartup that called zenity, which displayed the warning and provided the yes/no buttons. Alas, with Leap using sddm this no longer works. the Xstartup file exists, but isn't called by /etc/sddm.conf. I could probably ditch sddm and go back to xdm, but it would be nice to stay with the flow. Does anyone have any suggestions? Thanks, Lew -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

Re: [opensuse] Leap 42.2 Feedback
by stakanov＠freenet.de 29 Nov '16

29 Nov '16

>> >> -- >> To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org >> To contact the owner, e-mail: opensuse+owner(a)opensuse.org >> >> >> >> -----Ursprüngliche Nachricht Ende----- > > Hello Aaon and thank you for reporting your experience here. > For what is your problem (especially with 3D and Nvidia - I will not enter in the discussion about the > fall-back) > you shall know this link here: >https://devtalk.nvidia.com/default/topic/977518/linux/problems-with-multipl… > > In short what it says is that the version 375.20 for Linux has a bigger regression and they advice to > downgrade it to the 375.10 > If you find the latter in the repo by any chance, that should help your immediate problems and performance > hogs. > Hope that helps and have a lot of fun. > > Sorry but I think I will have to change mailer because for a reason that I do ignore the one I use does filter out what I write when sending. Really weired. Hope this time one can read something. --- Die Bundesliga hat begonnen! Alle Tore, alle Ergebnisse, alle News: Pocket Liga jetzt im https://app.adjust.com/dpynzd oder https://app.adjust.com/dpynzd herunterladen - kostenlos! -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 3

[opensuse] Another failed repository
by James Knott 29 Nov '16

29 Nov '16

Apparently the repository http://download.opensuse.org/repositories/network:/utilities/openSUSE_13.1/ is not available is this permanent? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 11

Re: [opensuse] Leap 42.2 Feedback
by stakanov＠freenet.de 29 Nov '16

29 Nov '16

> -----Ursprüngliche Nachricht----- > Von: Aaron Digulla > Gesendet: Di. 29.11.2016 21:24 > An: opensuse(a)opensuse.org > Betreff: Re: [opensuse] Leap 42.2 Feedback > > On 29.11.2016 21:00, sdm wrote: >> On 11/29/2016 11:38 AM, Aaron Digulla wrote: >> >>> Hi, >>> >>> I've upgraded to Leap 42.2 a week ago and I'd like to share my >>> experiences. It was 90% successful but I have two big pain points: 3D >>> and hibernate. Both features have degraded slowly over the past months >>> (it started with Leap 41.1, 13.2 was very stable for years). Newer >>> kernels tend to be less stable. 4.1 worked pretty good, 4.7 didn't work >>> at all. >>> >>> I used "zypper dup" to upgrade my distribution from Leap 41.1 and that >>> worked well, despite the fact that the wiki wasn't updated for Leap >>> 42.2. But the instructions for 13.x -> 42.1 were easy enough to >>> understand, so I could translate them myself. >>> >>> First boot worked, display manager failed. >>> >>> I had some trouble downloading the correct NVIDIA driver. I have a ASUS >>> GTX 1050 Ti, so I needed 375.20. When I had that, the display manager >>> (sddm?) started working. >>> >>> There were a couple of updates, so I installed those. I'm using KDE. >>> Clicking on "Logout" did nothing. >>> >>> journalctl reported that sddm-greeter was crashing. I tried again, same >>> result. >>> >>> Yesterday, I installed updates again and sddm-greeter refused to work >>> afterwards. I had to reboot manually from the console. This sucks. From >>> my point of view, sddm seems to be more of a problem than anything else -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] firefox 49 rendering option with css class incorrectly
by Per Jessen 29 Nov '16

29 Nov '16

I guess this isn't new, but I've only just today seen it on 13.1 and 42.2 - firefox 49.0.x I have something along the following: <select> <option>Donald</option> <option class="abc">Tom</option> <option class="abc">Dick</option> <option class="abc">Harry</option> </select> In my case, css class "abc" looks like this: option.abc { padding-left: 1em; color: blue; } I.e. the entries Tom, Dick and Harry should be indented on the left, and be displayed in blue. With ff49, this is completely ignored. I don't know when it changed - in ff34 it's still working. In my son's "Edge" on Windows, it works partially (colour, but no indentation). -- Per Jessen, Zürich (11.8°C) http://www.cloudsuisse.com/ - your owncloud, hosted in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 59