January 2016 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Monitor Wakes Up Randomly
by SDM 26 Jan '16

26 Jan '16

Hi, On TW Snapshot 20160121, I have an issue on my desktop PC where my ASUS VH242 monitor wakes up at random times after it goes to sleep. I'll set it, for instance, to go to sleep after 5 minutes in the Energy Saving section of Plasma 5's System Settings. For multiple days straight, it will go to sleep and stay asleep. Then, for whatever reason, one day the monitor will wake up within minutes of going to sleep, go back to sleep again, and continue cycling on and off, so I eventually just press the power button but this poses a problem if I'm not present. Does this sound like a Linux driver issue or something wrong with the actual monitor? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] system not booting
by Benjamin Draxlbauer 26 Jan '16

26 Jan '16

Morning Guys! I have a serious problem with my system: Today I wanted to start my system but after the bootmanager menue this message showed up: Ignoring BGRT: invalid status 0 (expected 1) BTRFS (device sda3): parent transid verify failed on 35295068160 wanted 41939771539587072 found 2542 BTRFS (device sda3): parent transid verify failed on 35295068160 wanted 41939771539587072 found 2542 BTRFS: open_ctree failed Boot has failed. To debug this issue add "rd.shell rd.debug" to the kernel command line. I tried it a few times but it didn't help. Actually i can't remember doing anything on my laptop, not even an update yesterday… Best, Benjamin D. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 5

[opensuse] Bootup of Luks partitions not waiting long for Password
by John Andersen 26 Jan '16

26 Jan '16

I've got a 13.2 installation that for some reason some time ago started waiting a real short time for passwords on the Plymouth screen (or at least the Plymouth wallpaper) for a password for the Luks encrypted partition. I have to hover over the keyboard waiting for that prompt to come up and type it really quick or it boots without my home partition mounted. I thought it was /etc/crypttab where the delay was set, but this appears to be ignored. There are a few bug reports but they appear full of arguing back and forth and nobody has a clue. Has anyone else seen this, or have a solution? -- After all is said and done, more is said than done. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 37

RE: [opensuse] can't get rid of desktop folder panel in plasma5
by stakanov＠freenet.de 26 Jan '16

26 Jan '16

> -----Ursprüngliche Nachricht----- > Von: tech(a)reachthetribes.org > Gesendet: So. 24.01.2016 13:29 > An: suse , > Betreff: [opensuse] can't get rid of desktop folder panel in plasma5 > > You know that default desktop folder panel that is on the desktop on a > new KDE setup? Well, I can't get rid of mine. There is not "close" > option when hovering the mouse over it. > > The problem is I just spent quite a bit of time setting up my desktop > with panels, colors, themes, etc. So I don't want to get rid of my other > settings, just this desktop folder panel. > > Anyone know how to get rid of it? > > -- > George > Box #1: 42.1 | KDE Plasma 5 | AMD Phenom IIX4 | 64 | 32GB > Box #2: 13.1 | KDE 4.12 | AMD Athlon X3 | 64 | 4GB > Laptop #1: 13.1 | KDE 4.12 | Core i7-2620M | 64 | 8GB > Laptop #2: 42.1 | KDE Plasma 5 | Core i7-4710HQ | 64 | 16GB > > -- > To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org > To contact the owner, e-mail: opensuse+owner(a)opensuse.org > > > > -----Ursprüngliche Nachricht Ende----- It is probable that you are new to KDE and you haven't yet had the time to go through the online help on the kde site about the functioning of plasma. It is a good and helpful lecture. https://userbase.kde.org/Welcome_to_KDE_UserBase This will help you a lot. Besides, for your problem: as the "folder view" is a plasmoid/object of plasma, right click on the desktop, choose unblock objects. Then click on the folder view plasmoid. A side bar is getting visible. The close button is on the right low corner. Above you have customize possibilities to change the view or change other functions (size, orientation). Once done, recall to block the objects to avoid unwanted changes of the desktop layout and object positions. Cheers. --- Alle Postfächer an einem Ort. Jetzt wechseln und E-Mail-Adresse mitnehmen! http://email.freenet.de/basic/Informationen -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 2

[opensuse] Thunderbird crashes on start - need to remove addons
by Carlos E. R. 25 Jan '16

25 Jan '16

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 cer@Telcontar:~> thunderbird --safe-mode (process:31920): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed cer@Telcontar:~> This happened after updating the calendar addon and enabling the google password addon - sorry, as I can't open thunderbird I can not check the actual name. I know that I have to disable that google thing, but as I can not start Thunderbird even in safe mode, I can't. Is there some file to edit or remove in order to disable that addon? ... Maybe I found it. There is a directory under .../extensions, in which the file install.rdf contains the string: <em:name>Provider for Google Calendar</em:name> This is the one causing the crash. I'll move the directory and try. ... No, it crashes. Removing this one, too: <em:name>Lightning</em:name> <em:version>4.0.5.2</em:version>  <em:description>An integrated calendar for Thunderbird</em:description> Crashes, same message. How can I really remove those two addons? cer@Telcontar:~> thunderbird --safe-mode (process:32464): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed cer@Telcontar:~> - -- Cheers Carlos E. R. (from 13.1 x86_64 "Bottle" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iEYEARECAAYFAlamIzwACgkQtTMYHG2NR9X5+gCcC3eY7ig/q2XzIvBXn67Fb96r cSoAoIGgyqivs/sA5apkusIzL5GlYIWf =fZYF -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 2

[opensuse] Plasmoids mixed up when using (screen with) different resolution
by Benjamin 25 Jan '16

25 Jan '16

Hi! I am searching for a workaround or help to solve the following problem: When i use a different screen or let us say better, a different resolution all my plasmoids are mixed up on the desktop. I just have to change the resolution and everything is a mess. I have already posted a bug in kde and opened a thread in the forum , but no one seems to have this problem…Any issue about this? https://forums.opensuse.org/showthread.php/512696-Plasmaoids-disturbed-afte… Thanks, Benjamin. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] Server down?
by James Knott 25 Jan '16

25 Jan '16

I keep getting pop up messages on my computer about problems connecting to http://download.opensuse.org/repositiories/LibreOffice/Factory/openSUSE_13.…. Anyone else getting this? It started yesterday. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 7

[opensuse] can't get rid of desktop folder panel in plasma5
by tech＠reachthetribes.org 24 Jan '16

24 Jan '16

You know that default desktop folder panel that is on the desktop on a new KDE setup? Well, I can't get rid of mine. There is not "close" option when hovering the mouse over it. The problem is I just spent quite a bit of time setting up my desktop with panels, colors, themes, etc. So I don't want to get rid of my other settings, just this desktop folder panel. Anyone know how to get rid of it? -- George Box #1: 42.1 | KDE Plasma 5 | AMD Phenom IIX4 | 64 | 32GB Box #2: 13.1 | KDE 4.12 | AMD Athlon X3 | 64 | 4GB Laptop #1: 13.1 | KDE 4.12 | Core i7-2620M | 64 | 8GB Laptop #2: 42.1 | KDE Plasma 5 | Core i7-4710HQ | 64 | 16GB -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

RE: Re: [opensuse] can't get rid of desktop folder panel in plasma5
by stakanov＠freenet.de 24 Jan '16

24 Jan '16

> -----Ursprüngliche Nachricht----- > Von: John Andersen > Gesendet: So. 24.01.2016 21:09 > An: opensuse(a)opensuse.org > Betreff: Re: [opensuse] can't get rid of desktop folder panel in plasma5 > > On 01/24/2016 05:36 AM, stakanov(a)freenet.de wrote: >> It is probable that you are new to KDE and you haven't yet had the time to go through the online help on > the kde site about the functioning of plasma. It is a good and helpful lecture. >> >> >>" target="_blank">https://userbase.kde.org/Welcome_to_KDE_UserBase > > One of the best collections of 404s I've seen in a while. > > In addition to trying to explain 3 different releases of KDE in one place (3,4,and plasma5), which > is seldom what the new user needs, it adds a lot of confusion, even to someone quite familiar with > kde from the beginning. > > Sad, too, because the wiki was clearly a labor of love, that became unloved when it was > time to maintain it. > > > > -- > After all is said and done, more is said than done. > -- > To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org > To contact the owner, e-mail: opensuse+owner(a)opensuse.org > > > > -----Ursprüngliche Nachricht Ende----- You are surely right. Please let me know the bug number once you filed it to bugs KDE (https://bugs.kde.org/) so I can bring my support to it. Regards. P.S. I would exactly post these observations (with some 404 links). Good idea. --- Alle Postfächer an einem Ort. Jetzt wechseln und E-Mail-Adresse mitnehmen! http://email.freenet.de/basic/Informationen -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse][13.1,13.2] rv17.0 firefox-esr and seamonkey 2.39 no longer can access https:// sites, while FF43 and esr38 can
by Felix Miata 24 Jan '16

24 Jan '16

TW and 42.1 work OK, but not 13.1 or 13.2. Is this already known about? Is there some pref that needs to be changed? I don't see an open bug: "Secure Connection Failed An error occurred during a connection to www.youtube.com. The security card or token does not exist, needs to be initialized, or has been removed. (Error code: sec_error_no_token) The page you are trying to view cannot be shown because the authenticity of the received data could not be verified. Please contact the website owners to inform them of this problem. Alternatively, use the command found in the help menu to report this broken site." 13.2: libnsssharedhelper0-1.0.10-1.3.i586 mozilla-nss-3.21-1.1.i586 mozilla-nss-certs-3.21.1-1.1.i586 mozilla-nspr-4.11-1.1.i586 firefox-esr-17.0.11-1.23.i586 seamonkey-2.39-1.1.i586 13.1: libnsssharedhelper0-1.0.10-6.1.2.i586 mozilla-nss-3.21-1.1.i586 mozilla-nss-certs-3.21.1-1.1.i586 mozilla-nspr-4.11-1.1.i586 firefox-esr-17.0.11-1.23.i586 seamonkey-2.39-1.1.i586 -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 4

[opensuse] digikam crashes
by don fisher 24 Jan '16

24 Jan '16

The system I used before my fatal upgrade ran digikam. Now I receive a signal: Segmentation fault when it is run. It says it is using /lib64/libthread_db.so.1, and the current thread is 1. If I examine the dependencies for digikam in Yast2, it shows libpthread.so.0(GLIBC_2.2.5)(64bit) Could this be the problem, or is there more info somewhere else? The last entry in the dump for thread 1 is: Thread 1 (Thread 0x7f145f4a7880 (LWP 3562)): [KCrash Handler] #5 0x00007f1457fb406c in __strcmp_ssse3 () at /lib64/libc.so.6 I did a search for libthread under Yast2, with the contains switch, and is says there are no results. But the same Yast2 code lists libthread_db as a dependency. Comments welcome. Don -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 19

[opensuse] Tumbleweed: X Consuming Huge Amounts of Memory
by SDM 24 Jan '16

24 Jan '16

On my desktop PC, X easily consumes over 3 GB of memory within 16 hours of use and will continue crawling over the 4 GB mark. It will eventually make my system run out of memory unless I log out of and back in KDE every 1-3 days. I open and close a lot of windows (Dolphin, FF, and more), and this makes X incrementally increase its memory footprint. When I close Windows, the memory never drops back down; it just goes in one direction and that is up. Is anyone else experiencing this under TW? I'm using the radeon open source driver on a "01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Juniper PRO [Radeon HD 6750]" card. I did some tests with running Leap on a different HDD and the same PC, and this doesn't happen. This problem also didn't used to happen on TW but was introduced with a Plasma 5 update some weeks ago. I've asked around a bit through some other channels and nobody is familiar with this so I'm trying here. Any suggestions on how I can find out what the culprit is for the leak (I think it may be KDE related, not X itself)? I would file a bug report but don't know if X is the culprit, or if it's plasmashell or something else. Thanks, sdm -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] Why would dbus-daemon be so busy?
by Carlos E. R. 24 Jan '16

24 Jan '16

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, This is what top shows - observe how high dbus-daemon load is: top - 15:12:21 up 8 days, 22:18, 15 users, load average: 1.08, 1.25, 1.26 Tasks: 235 total, 3 running, 232 sleeping, 0 stopped, 0 zombie %Cpu(s): 45.9 us, 18.0 sy, 0.0 ni, 25.2 id, 9.8 wa, 0.0 hi, 1.0 si, 0.0 st KiB Mem: 500144 total, 490024 used, 10120 free, 2556 buffers KiB Swap: 6143996 total, 725840 used, 5418156 free, 338468 cached PID USER PR NI VIRT RES SHR SWAP S %CPU %MEM TIME+ COMMAND 1183 message+ 20 0 8532 3368 804 656 R 35.20 0.673 361:05.18 dbus-daemon 30873 cer 20 0 207044 153532 1620 35488 S 11.08 30.70 40:41.27 wget 14475 cer 20 0 421972 66372 1532 337480 S 10.43 13.27 128:32.55 wget 4050 p2phelp+ 20 0 62572 30748 2280 1840 S 2.282 6.148 438:26.02 mldonkey 2622 root 20 0 51000 6088 3716 5252 S 1.304 1.217 93:17.03 X 2913 cer 20 0 391596 6456 3712 3928 S 0.652 1.291 25:45.27 xfce4-terminal 2923 cer 20 0 37044 3340 2380 1336 S 0.652 0.668 49:46.00 gkrellm 4058 cer 20 0 4232 1360 708 300 S 0.652 0.272 11:32.09 tmux 9 root 20 0 0 0 0 0 R 0.326 0.000 4:02.26 rcu_sched 21 root 20 0 0 0 0 0 S 0.326 0.000 3:36.47 kswapd0 2902 cer 20 0 108272 1924 1456 2592 S 0.326 0.385 35:20.76 xfwm4 3455 cer 20 0 285736 1500 1112 1528 S 0.326 0.300 41:24.29 parcellite 4824 root 20 0 0 0 0 0 S 0.326 0.000 0:02.65 kworker/0:0 6325 root 20 0 3768 1304 888 0 R 0.326 0.261 0:00.31 top 1 root 20 0 6672 2064 1236 520 S 0.000 0.413 0:29.29 systemd 2 root 20 0 0 0 0 0 S 0.000 0.000 0:00.38 kthreadd 3 root 20 0 0 0 0 0 S 0.000 0.000 2:31.76 ksoftirqd/0 5 root 0 -20 0 0 0 0 S 0.000 0.000 0:00.00 kworker/0:0H 7 root rt 0 0 0 0 0 S 0.000 0.000 0:00.03 migration/0 8 root 20 0 0 0 0 0 S 0.000 0.000 0:00.00 rcu_bh 10 root rt 0 0 0 0 0 S 0.000 0.000 0:03.78 watchdog/0 11 root 0 -20 0 0 0 0 S 0.000 0.000 0:00.00 khelper 12 root 20 0 0 0 0 0 S 0.000 0.000 0:00.00 kdevtmpfs 13 root 0 -20 0 0 0 0 S 0.000 0.000 0:00.00 netns 14 root 0 -20 0 0 0 0 S 0.000 0.000 0:00.02 writeback 15 root 0 -20 0 0 0 0 S 0.000 0.000 0:00.00 kintegrityd 16 root 0 -20 0 0 0 0 S 0.000 0.000 0:00.00 bioset message+ 1183 2.8 0.6 8532 3368 ? Ss Jan15 361:40 /bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation CPU is "Intel(R) Pentium(R) 4 CPU 2.80GHz", and runs 13.1 32 bit. The machine is currently doing a mirror copy of several openSUSE 13.1 repos with wget, and has two big external hard disks connected via USB. The mirror copy is written to one of them. They are formatted with XFS. I understand that wget shows a big load, but why dbus-daemon? :-? - -- Cheers Carlos E. R. (from 13.1 x86_64 "Bottle" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iEUEARECAAYFAlak4LQACgkQtTMYHG2NR9VhMgCWMuDdWITw793ffxVc6qHL89Nh dQCdEbocWFssIlJeMBYTreHxgP18krQ= =hA3k -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Installation DVD is horrible!
by don fisher 24 Jan '16

24 Jan '16

I have been trying to build a bootable USB drive on my 13.2 system. I plug in the USB drive, BOOT the installation DVD and select installation. I get to where it shows the devices, and select the Create Partition .. and choose the USB drive. I then have to go to Expert Partitioner to set up swap, /, and home partitions. But even after doing all that, when I start the build the damn thing first formats the USB swap partition, and then mounts a swap partition from another drive, so my fstab is corrupted. Why does it refuse to honour my request to use the USB drive? Is there a trick I am missing? The USB drive already had valid partitions on it when I started. I told the system I wanted to use all three, by checking them in the usage menu. But it then reformatted the disk, removing the existing swap and making the first partition /. It was intending to use the same swap it attached above. I do not think this should not be this hard. Why is swap so hard to deal with? Don -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 35

[opensuse] x11vnc is not working with TigerVNC viewer on Leap42.1
by Marc Chamberlin 24 Jan '16

24 Jan '16

Hi - For years now, I have run the x11vnc server as an xinetd daemon using the following configuration for the service - service x11vncservice { socket_type = stream protocol = tcp wait = no user = root server = /usr/bin/x11vnc server_args = -inetd -rfbauth /etc/vncpasswd -oa /var/log/x11vnc.log -env FD_XDM=1 -find -rfbport 5900 port = 5900 type = UNLISTED } and up until when I upgraded to Leap42.1, from openSuSE12.3 ;-) (yeah I don't change very often) this has worked fine. But now I cannot get a vncviewer on an openSuSE13.2 or 13.1 to connect to this system running 42.1 The things I have noted that are of interest, was that openSuSE switched to using VNC software from TigerVNC and the problem appears to be either with the server trying to define the display to connect to or in gaining authorization to connect to the display. The x11vnc.log shows the following ominous messages - 23/01/2016 17:40:33 x11vnc version: 0.9.13 lastmod: 2011-08-10 pid: 11698 23/01/2016 17:40:33 23/01/2016 17:40:33 wait_for_client: WAIT:cmd=FINDDISPLAY 23/01/2016 17:40:33 23/01/2016 17:40:33 initialize_screen: fb_depth/fb_bpp/fb_Bpl 24/32/2560 23/01/2016 17:40:33 23/01/2016 17:40:33 initialize_screen: -inetd mode: F_GETFL(stdin): 0x2 23/01/2016 17:40:33 initialize_screen: -inetd mode: F_GETFL(stdout): 0x2 23/01/2016 17:40:33 initialize_screen: -inetd mode and stdio is O_RDWR 23/01/2016 17:40:33 other clients: 23/01/2016 17:40:33 incr accepted_client=1 for 192.168.10.10:60784 sock=3 23/01/2016 17:40:33 Client Protocol Version 3.8 23/01/2016 17:40:33 Protocol version sent 3.8, using 3.8 23/01/2016 17:40:33 wait_for_client: got client 23/01/20ddd16 17:40:33 client progressed=1 in 0/0 0.000001 s 23/01/2016 17:40:33 client useCopyRect: 192.168.10.10 0 23/01/2016 17:40:33 client_set_net: 192.168.10.10 0.0002 23/01/2016 17:40:33 wait_for_client: running: env X11VNC_SKIP_DISPLAY='' /bin/sh /tmp/x11vnc-find_display.A0fqoe 23/01/2016 17:40:34 wait_for_client: find display cmd failed. 23/01/2016 17:40:34 wait_for_client: bad reply ' A quick glance at the x11vnc code seems to indicate that the server was looking for a response starting with DISPLAY and failing to find it, it gives up and throws out the "find display cmd failed" message. Caveat, I only took a quick glance at the code which I found a copy of on the internet, so have not grokked it fully. Other observations, I did try manually starting the x11vnc server, without any extra parameters, x11vnc -display :0 and with these parameters - x11vnc -rfbauth /etc/vncpasswd -oa /var/log/x11vnc.log -find -rfbport 5900 then connected to it from a client using the TigerVNC viewer, which works fine i.e. vncviewer far-host:0 and this confirmed that at least the vncpasswd file was set up correctly and accepting my password. But I really want to run it as a daemon process so that it will always be available to people (on an internal network) who do not know how to use SSH connections. For grins, I tried setting the xinetd servers args for x11vnc to the following, also with no joy. server_args = -inetd -rfbauth /etc/vncpasswd -oa /var/log/x11vnc.log -auth guess -find -rfbport 5900 I was suspicious about setting the env parameter "-env FD_XDM=1" but removing it and substituting the "-auth guess" did not succeed either. Anyone else seeing problems with x11vnc or my method of running it as a server? Thanks in advance for any and all offers of help... Marc... -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] plasmashell in Leap 42.1
by Marc Chamberlin 24 Jan '16

24 Jan '16

Hi - I have just upgraded one of my systems to Leap 42.1 and am encountering a problem that is turning into a showstopper for us. Every few minutes, and in particular it seems after clicking on the launcher in the kicker bar at the bottom of the desktop, the system comes to a near halt for a few minutes and does not respond to a lot of mouse or keyboard input actions. Any shell window that is open will be responsive but much of the GUI stops responding. I have discovered that when this happens, top reports that the plasmashell process is using 100% of the cpu. Google has not provided me with a solution that I can understand, so in layman's terms can some kind guru tell me how to fix this issue? I will gladly provide any additional info needed, and thanks in advance for your help. Marc.... -- "The Truth is out there" - Spooky -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 7

[opensuse] Folderview - rename file on view issue
by ianseeks 23 Jan '16

23 Jan '16

Hi I've got a folderview of Documents on my desktop. I right clicked on one write document to rename it. it presented the highlighted file name to me and when i clicked in the input box to change the name, it launched the associated application Writer instead. I closed Writer and the rename function was now ready to used as per normal. Do i log this against Plasma in kde.bugs or do i try and find the folderview widget author (there's no mention of an author in the settings for folderview) regards Ian -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] latest patch need to restart
by tech＠reachthetribes.org 22 Jan '16

22 Jan '16

6 16

[opensuse] Strange activity of network manager in Leap 42.1
by Carlos E. R. 22 Jan '16

22 Jan '16

(Resending. My ISP reported an error) In syslog I see this repeated activity about every half minute: Jan 15 18:06:24 Minas-Anor dbus-daemon[775]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' Jan 15 18:06:24 Minas-Anor dbus-daemon[775]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Jan 15 18:06:50 Minas-Anor dbus-daemon[775]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' Jan 15 18:06:50 Minas-Anor dbus-daemon[775]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Jan 15 18:07:02 Minas-Anor dbus-daemon[775]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' Jan 15 18:07:02 Minas-Anor dbus-daemon[775]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Jan 15 18:07:25 Minas-Anor dbus-daemon[775]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' Jan 15 18:07:25 Minas-Anor dbus-daemon[775]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Jan 15 18:07:38 Minas-Anor dbus-daemon[775]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' Jan 15 18:07:38 Minas-Anor dbus-daemon[775]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Jan 15 18:07:55 Minas-Anor dbus-daemon[775]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' Jan 15 18:07:55 Minas-Anor dbus-daemon[775]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' I don't know what could cause this. Bad configuration or bug :-? -- Cheers/Saludos Carlos E. R. (openSUSE Leap 42.1, test at Minas-Anor) -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1

[opensuse] checking on a sending mail problem with Thunderbird
by Carlos E. R. 22 Jan '16

22 Jan '16

Hi, Sometimes when I try to reply or send an email to this list with Thunderbird, I get a response of temporary server problem, I understand meaning at my ISP, telefonica.net. A copy of the email appears at the "Sent" folder, but it was never sent and never arrives. I wonder why Thunderbird, which reports an error, behaves as if it was sent. It should abort and ask to retry or not. What I do as a bypass is copy the email on the sent folder to the draft folder of another account (gmail), edit and send. All this happens both in Linux (Os.Leap) and Windows 10 - I'm now trying in Windows: so it may be a Thunderbird problem. What I haven't tested yet is sending on another system via postfix, and see what error I'm get from the ISP, if any. -- Saludos/Cheers, Carlos E.R. (Minas-Morgul - W10) -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 18

[opensuse] very slow downloads of debuginfo packages from KDE:/Frameworks5/openSUSE_Leap_42.1
by Vadym Krevs 22 Jan '16

22 Jan '16

Hello, is anyone else experiencing very slow downloads of debuginfo rpms from download.opensuse.org - <20Kb/sec - while non-debuginfo rpms download at 1-2Mb/sec? The box running zypper is in UK. I did a quick mirror search, and found some very fast ones that mirror all rpms from KDE:/Frameworks5/openSUSE_Leap_42.1 except debuginfo's. -- Regards, Vadym -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 5

[opensuse] Can't get remote kernel logging working.
by Carlos E. R. 22 Jan '16

22 Jan '16

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I'm trying to log kernel messages on another machine to log a possible kernel crash. I got this working about two months ago on these same machines, running 13.1, but now it fails. On the receiving machine I run as root: netcat -u -l 6666 | tee -a remote_log On sending machine I do, for testing: netcat -u 192.168.1.15 6666 Hello world ^C And it is duly printed on the other side. So far, so good. I verify remote machine data: # ifconfig eth0 Link encap:Ethernet HWaddr 00:03:0D:05:17:FC inet addr:192.168.1.15 Bcast:192.168.1.255 Mask:255.255.255.0 ... Now I do: modprobe netconsole cd /sys/kernel/config/netconsole/ mkdir target1 cd target1/ echo "00:03:0D:05:17:FC" > remote_mac echo 6666 > remote_port echo 192.168.1.15 > remote_ip cat dev_name echo 1 > enabled I get this response in the log, verifiying that it is enabled: <0.6> 2016-01-22 04:42:57 Telcontar kernel - - - [191845.722453] console [netcon0] enabled <0.6> 2016-01-22 04:42:57 Telcontar kernel - - - [191845.722456] netconsole: network logging started <0.6> 2016-01-22 04:43:05 Telcontar kernel - - - [191854.577279] netpoll: netconsole: local port 6665 <0.6> 2016-01-22 04:43:05 Telcontar kernel - - - [191854.577283] netpoll: netconsole: local IPv4 address 0.0.0.0 <0.6> 2016-01-22 04:43:05 Telcontar kernel - - - [191854.577284] netpoll: netconsole: interface 'eth0' <0.6> 2016-01-22 04:43:05 Telcontar kernel - - - [191854.577285] netpoll: netconsole: remote port 6666 <0.6> 2016-01-22 04:43:05 Telcontar kernel - - - [191854.577287] netpoll: netconsole: remote IPv4 address 192.168.1.15 <0.6> 2016-01-22 04:43:05 Telcontar kernel - - - [191854.577288] netpoll: netconsole: remote ethernet address 00:03:0d:05:17:fc <0.6> 2016-01-22 04:43:05 Telcontar kernel - - - [191854.577291] netpoll: netconsole: local IP 192.168.1.14 <0.6> 2016-01-22 04:43:05 Telcontar kernel - - - [191854.577293] netconsole: network logging started Then I cause an event, like plugin in/out an USB stick, to cause messages to be printed - but nothing gets on the remote. Why? I must have done something wrong, but I can't see it. - -- Cheers Carlos E. R. (from 13.1 x86_64 "Bottle" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iEYEARECAAYFAlahqg8ACgkQtTMYHG2NR9U7fACcCOrzV085lHl9fZ3IApiSbgSI NEMAn2QVmZ9dbZWf/GtUqeNjqUZu70xX =BHUK -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] Firefox from mozilla obs: Secure Connection Failed (sec_error_no_token)
by Mark Goldstein 22 Jan '16

22 Jan '16

It happened on both OS 13.1 and Leap. Firefox installed from obs (v43.0.4) can't connect to most secured sites. After downgrading to v43.0.3 from main repository the problem disappeared (did it on 13.1 only). Search shows that it happened before for older versions of FF. Anyone sees the same problem? Regards, -- Mark Goldstein -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 4

[opensuse] What do you use for skype?
by Dave Plater 22 Jan '16

22 Jan '16

Hi, my daughter has an online job and her windows vista has died to the point where it needs an install disk to fix, her boyfriend did something wrong. So daddy's going to install Leap:42.1, which I've already run from another disk on her computer in the past so I know it works. One thing that she needs that is missing is skype. I need to get this setup this morning as she's already missed a couple of days of work. I've looked around, skype offers an openSUSE:12.1 i586 rpm - no good for x86_64, Ubuntu / Debian have the latest x86_64/x86 versions. I found a couple of packages in obs home repos and one home repo in PMBS (packman obs). I copied and updated the PMBS package with the latest skype-4.3.0.37.tar.bz2 in my PMBS home repo and there doesn't seem to be a problem so I can't understand why nobody in openSUSE bothers with skype. Is there a working, easy to setup with an existing skype account, alternative? Thanks Dave Plater -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

13 20

[opensuse] Help with bugzilla
by don fisher 22 Jan '16

22 Jan '16

As suggested, I have been trying to file a bug report relating to the thread I started relating to the Leap upgrade failure. I cannot seem to access bugzilla, or if I am I cannot recognize it. I created an account and confirmed my email address. When I click the link to bugzilla.opensuse.org, I receive a page with a red banner stating "Please confirm that your email address is valid by clicking here and following the instructions. If you have already done so, please log out and log back in." I have confirmed my email address, and if I press the "log out" I receive "Bad request! Your browser (or proxy) sent a request that this server could not understand". I do not know how to proceed. from here. Please advise for the GUI impaired:-) Don -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1