March 2015 - openSUSE Users - openSUSE Mailing Lists

[opensuse] oSC lodging
by Douglas DeMaio 24 Mar '15

24 Mar '15

For those of you attending the openSUSE Conference in The Hague, we recommend these affordable lodging accommodations for your visit. Hotel Van der Valk Hotel Den Haag - Nootdorp The Hotel is a short distances from Westvliet. Double rooms with breakfast are 105 € per night Single rooms with breakfast are 95 € per night Sleepover There is also a sleepover in one of the sport halls at the venue. For 12.50€, you get a bed, blanket and access to a shower. You can reserve your place during our registration process. This offer is limited to 50 people, so its is on a first come, first serve basis. If you plan on taking the bus from Nuremberg and have not informed me, please let me know. Currently 17 people have signed up. -- Respectfully, Douglas DeMaio Senior Consultant, openSUSE douglas.demaio(a)suse.com -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Eth interface has no static ipv4 assigned and usable when there is no link during interface upbringing?
by cagsm 24 Mar '15

24 Mar '15

Hello. Some machine today had power problems of an attached ethernet switch, and the ethx interface of the 13.2 x64 machine only had some ipv6 linklocal or so address assigned even when the switch came back. There used to be commands such as rcnetwork restart ethx I am unsure if this is because of some lackings of wicked components that there is this odd behavior. I also tried wicked ifreload or similar commands but I couldnt make it to restart reinitialise the network interface that had problem. Can I not set an ip address without the actual network cord being plugged in and having an ethernet link with a partner ethernet device? I can remember older Suse versions where I never had such problems. At the end I needed to reboot the whole machine just to have that ipv4 address on that interface again working. Thank you for helping. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 5

[opensuse] Crashing after restart
by A. den Oudsten 24 Mar '15

24 Mar '15

Earlier I wrote: On my E-machine I had installed a TP link N900 wireless dual band PCI express adapter TL-WDN 4800 version 1.3 I installed Tumbleweed 20150227 and after the restart it worked untill the blue K appeared, and crashed. I deleted, in Windows, the / partition and the /home partition and installed a fresh burned Tumbleweed 20150227 with the same results. Then I repeated this procedure with 13.2, with the same results. I must say that I skipped in the installation procedure to configure the AR9300Wireless LAN adapter because I expected that to be done automaticly by Network Manager. If that is the clue of the crashes I would like to know where I can find a detailed instruction how to do that. Some help please! I was in the situation to connect an ethernetcable I did a fresh install with Tumbleweed 20150312 which, after the automatic restart, which stopped at the same point. I could run Firefox, Online Help, LibreOffice and Kinfocenter (which indicated that even 20150316 was installed. But I could not install the default Panel!! Today I did an upgrade with 20150318 which stopped at the same place, but I could choose 'Desktop Icons' and tried to add a panel. Nothing happened!! Any Idea how to solve this situation? André den Oudsten -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] gftp of opensuse sources
by don fisher 23 Mar '15

23 Mar '15

I am using the version of gftp that is a component of 3.2. When try to access the opensuse source at: http://download.opensuse.org /source/distribution/13.2/repo/oss/suse/src I receive a directory listing, with some file lengths listed as zero. When I try to download the files using HTTP I get: HTTP/1.1 302 Found Date: Wed, 18 Feb 2015 23:21:32 GMT Server: Apache/2.2.12 (Linux/SUSE) X-Prefix: 71.228.144.0/20 X-AS: 33653 X-MirrorBrain-Mirror: suse.mobile-central.org X-MirrorBrain-Realm: country Location: http://suse.mobile-central.org/source/distribution/13.2/repo/oss/suse/src/z… Content-Type: text/html; charset=iso-8859-1 Disconnecting from site download.opensuse.org Error: Remote site download.opensuse.org disconnected. Max retries reached...giving up I have not done this in awhile, and it used to be from ftp sites. Can you help me with what I am doing wrong? Is it because the file content is not text? I know I can download files using a browser. I thought this would be similar. How does one set up gftp to access these sites? Thanks, and sorry if a dumb question. Don -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 6

[opensuse] How to set FQDN such that no DNS lookup is performed by hostname -f?
by Robin Roth 23 Mar '15

23 Mar '15

Hi, I try to set a hostname on opensuse 13.2 in a way, that it is - preserved over reboots - hostname -s and hostname -f give answers based on what I set and don't ask DNS What I tried so far: My host is called pc.foo. I use a static IP setup. I put pc.foo in /etc/hostname (=/etc/HOSTNAME) Then hostname -s gives me 'pc', but hostname -f does a dns lookup for pc, which in my network resolves to pc.bar, because 'bar' is in my NETCONFIG_DNS_STATIC_SEARCHLIST. What works is to run 'hostname pc.foo' at boot. But there must be a nicer way to tell wicked which hostname to use. In my opinion it should respect /etc/hostname. Also I don't want to put entries in /etc/hosts as I use a central hosts list in our network where "pc" maps to pc.bar, which should be no issue as long as by machine knows it is pc.foo. Am I missing something? Best, Robin -- ---------------------------------------------------------------------------- Robin Roth Tel.: +49 721 608 43583 Institute for Theoretical Physics Fax: +49 721 608 43582 Karlsruhe Institute of Technology (KIT) Wolfgang Gaede Str.1 D-76131 Karlsruhe e-mail: robin.roth(a)kit.edu

2 1

[opensuse] No more verbose messages from journal replay at boot
by Daniel Bauer 23 Mar '15

23 Mar '15

Hello, due to some complete freezes (still trying to find out...) I had to restart the computer without proper shutdown. In this case reiserfs makes a check and replays the journal. This also happened this time as I can see in the log, but while doing it, I don't see the typical messages "replayed... " anymore. Instead the cursor stays below "started the System check on dev/..." while obviously the journal is replayed. I miss the verbose output of the reiserfs disk check, because this way "nothing" is going on on my screen and I don't know if the boot process has stopped or if it's going on... How can I have those verbose messages back? OS 13.2, all recent updates done. Thanks for hints. Daniel -- Daniel Bauer photographer Basel Barcelona http://www.daniel-bauer.com room in Barcelona: https://www.airbnb.es/rooms/2416137 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Root partition gets full
by Albert Oszkó 22 Mar '15

22 Mar '15

Hi all, A few days days ago I tried to install some updates on my Lenovo G 505 laptop. The wallpaper suddenly disappeared along with the system tray and only the mouse cursor remained showing that it is waiting for something to get finished. I left it and returned to the computer after an hour and it was still waiting for something. I restarted it - but it was not an easy job. It turned out finally that / partion is full. I booted into safe mode and deleted lots of things from /tmp and /var/tmp but it was only a temporary measure. I do not see anything that could fill the 20 G / root partiton. This is an oS 13.2 laptop with KDE 4.14.5. Home is on a separate partiton. Regards, Albert -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 9

[opensuse] Main user no longer able to login to KDE
by Bob Williams 22 Mar '15

22 Mar '15

Using openSUSE 13.2 on an x86_64 system, with KDE4.4 Since doing a zypper patch this morning followed by a reboot, my main user can no longer login to KDE. After entering my password, the dialog stops after displaying the hard drive icon. It never gets to the hammer and wrench, world, etc. A second user on the same machine can login to the GUI OK, so I'm guessing there's an incompatible config file somewhere in my user setup, Any suggestions as what I should edit/delete? Bob -- Bob Williams -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1

[opensuse] Emacs at start up
by don fisher 21 Mar '15

21 Mar '15

I find that whenever I start a new system, either my existing .emacs gets overwritten with the .gnu-emacs file, or a .gnu-emacs file is added. But my the emacs application ignores my .emacs file, I assume using the .gtk-emacs instead. I also found some form of .gtk-emacs files (I deleted them so do not have an accurate file name) that were also introduced. Where do these files come from, who does it and how can I turn this off. I do not need all this help and do not want my home directory messed with. Don -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] .SITE and other "new" TLDs
by Yamaban 21 Mar '15

21 Mar '15

Hello all, For all of you that use "private" domain-names, please set a bookmark for this URLs, and refer to it before your next try, to reduce DNS based failures like the ".site" debacle this month. Just the TLDs http://data.iana.org/TLD/tlds-alpha-by-domain.txt More info, html http://www.iana.org/domains/root/db - Yamaban. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0