June 2013 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Systemd reports network is up,, but it is ifact down.
by Carlos E. R. 14 Jun '13

14 Jun '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 See: > Telcontar:~ # systemctl status network.service network.service - > LSB: Configure network interfaces and set up routing Loaded: loaded > (/etc/init.d/network) Active: active (running) since Mon, > 2013-06-10 01:03:47 CEST; 59s ago Process: 994 > ExecStart=/etc/init.d/network start (code=exited, > status=0/SUCCESS) CGroup: name=systemd:/system/network.service └ > 1846 /sbin/ifplugd -i eth1 -r > /etc/sysconfig/network/scripts/ifplugd-selectif -f -I -u 0 -d 10 > > Jun 10 01:03:45 Telcontar.valinor network[994]: eth1 is up Jun > 10 01:03:45 Telcontar.valinor network[994]: ..doneWaiting for > mandatory devices: eth0 Jun 10 01:03:46 Telcontar.valinor > network[994]: 15 Jun 10 01:03:46 Telcontar.valinor network[994]: > eth0 device: Realtek Semiconductor Co., Ltd. RTL8111/8168 Jun > 10 01:03:46 Telcontar.valinor network[994]: eth0 IP address: > fc00::14/64 Jun 10 01:03:46 Telcontar.valinor network[994]: eth0 > is up Jun 10 01:03:47 Telcontar.valinor network[994]: ..done > ppp0 Jun 10 01:03:47 Telcontar.valinor network[994]: ppp0 > Startmode is 'manual' Jun 10 01:03:47 Telcontar.valinor > network[994]: ..skippedSetting up service network . . . . . . > . . . . . . ...done Jun 10 01:03:47 Telcontar.valinor > systemd[1]: Started LSB: Configure network interfaces and set up > routing. Telcontar:~ # Yet there is no ping: > Telcontar:~ # ping router connect: Network is unreachable > Telcontar:~ # rcgpm start redirecting to systemctl start gpm Job > for gpm.service failed. See 'systemctl status gpm.service' and > 'journalctl -n' for details. Telcontar:~ # I need gpm to copy that text in text mode to a file in another terminal, in order to post it later. [...] Problem solved. > Telcontar:~ # systemctl restart gpm.service Telcontar:~ # > Telcontar:~ # systemctl restart network.service Telcontar:~ # ping > router PING router (192.168.1.1) 56(84) bytes of data. 64 bytes > from router (192.168.1.1): icmp_seq=1 ttl=64 time=0.341 ms 64 bytes > from router (192.168.1.1): icmp_seq=2 ttl=64 time=0.227 ms 64 bytes > from router (192.168.1.1): icmp_seq=3 ttl=64 time=0.223 ms ^C --- > router ping statistics --- 3 packets transmitted, 3 received, 0% > packet loss, time 2000ms rtt min/avg/max/mdev = > 0.223/0.263/0.341/0.057 ms Telcontar:~ # systemctl status > network.service network.service - LSB: Configure network interfaces > and set up routing Loaded: loaded (/etc/init.d/network) Active: > active (running) since Mon, 2013-06-10 01:09:01 CEST; 7s ago > Process: 3655 ExecStop=/etc/init.d/network stop (code=exited, > status=0/SUCCESS) Process: 4456 ExecStart=/etc/init.d/network start > (code=exited, status=0/SUCCESS) CGroup: > name=systemd:/system/network.service └ 5156 /sbin/ifplugd -i eth1 > -r /etc/sysconfig/network/scripts/ifplugd-selectif -f -I -u 0 -d > 10 > > Jun 10 01:08:58 Telcontar.valinor network[4456]: eth1 is up > Jun 10 01:08:58 Telcontar.valinor network[4456]: ..doneWaiting for > mandatory devices: eth0 Jun 10 01:09:00 Telcontar.valinor > network[4456]: 17 16 Jun 10 01:09:00 Telcontar.valinor > network[4456]: eth0 device: Realtek Semiconductor Co., Ltd. > RTL8111/8168 All that in text mode. If I start a graphical session without network, many applications set to start in session saved state fail and delay session start. As it is, it takes 5 entire minutes fro grub to working text prompt - I have a video to prove it. :-/ - -- Cheers / Saludos, Carlos E. R. (from 12.3 x86_64 "Dartmouth" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iEYEARECAAYFAlG1HUkACgkQIvFNjefEBxpy3QCfUsG4yPovxOQWkDvLJ3ZiMWU7 6E4An078Brlts1KHhgUB3vX85SgTHERV =dnAU -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 8

[opensuse] Can't increase shared_buffers for PostgreSQL on openSUSE 12.3
by Andreas 14 Jun '13

14 Jun '13

Hi I just installed an openSUSE 12.3 64Bit on an i5 box with 32GB RAM. Then I installed postgresql 9.2.4. The pg service starts with default config. As default it has only 24 MB shared_buffers. I need it way higher like 4 or even 8 GB. As soon I change those 24 MB to something higher PG won't start anymore. I had the same issue back with openSUSE 12.1 and it was solved when I switched from systemd back to sysvinit. How can I get more memory for PG on openSUSE 12.3 ? Regards Andreas -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] calibre e-book reader failure
by e-letter 14 Jun '13

14 Jun '13

Readers, Calibre was installed via zypper: zypper install calibre. The program fails to start, reporting the following command terminal error: Traceback (most recent call last): File "/usr/bin/calibre", line 19, in <module> from calibre.gui2.main import main File "/usr/lib/calibre/calibre/gui2/__init__.py", line 7, in <module> from PyQt4.Qt import (QVariant, QFileInfo, QObject, SIGNAL, QBuffer, Qt, ImportError: cannot import name QVariant -- nomail-mode subscriber -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Wireshark crashes
by James Knott 14 Jun '13

14 Jun '13

I've noticed Wireshark now shuts down when doing something like restarting the capture. This is a very recent problem and, IIRC, there was an update recently. Has anyone else experienced this? tnx jk -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 4

[opensuse] XFS and openSUSE 12.1
by Roger Oberholtzer 14 Jun '13

14 Jun '13

I am using XFS on a 12.1 system. The system records jpeg data to large files in real time. We have used XFS for this for a while since it has as a listed feature that it is well suited to writing streaming media data. We have used this for quite a while on openSUSE 11.2. We have developed a new version of this system that collects more data. What I have found is that the jpeg data is typically written at the speed I expect. Every once in a while, the write takes 100x longer. Instead of the expected 80 msecs or so to do the compress and write, it takes, say, 4 or 5 seconds. I have looked in all the usual suspect places, and nothing seems to point at anything. For one test, I wrote to /dev/null instead of the real file, The delays do not happen. They do seem to be related to actually writing to the physical disk. I expect some delay occasionally when disks are physically flushed. There is buffering in our application to allow this. But 5 seconds is simply wrong. So, I am curious if anyone has seen performance issues like this with XFS on openSUSE 12.1. Yours sincerely, Roger Oberholtzer Ramböll RST / Systems Office: Int +46 10-615 60 20 Mobile: Int +46 70-815 1696 roger.oberholtzer(a)ramboll.se ________________________________________ Ramböll Sverige AB Krukmakargatan 21 P.O. Box 17009 SE-104 62 Stockholm, Sweden www.rambollrst.se -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

11 112

[opensuse] rsyslog fails to log news. apparmour fault? systemd?
by Carlos E. R. 13 Jun '13

13 Jun '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 > <3.6> 2013-06-13 10:32:27 Telcontar boot.apparmor 30022 - - > Unloading AppArmor profiles ..done <3.6> 2013-06-13 10:32:27 > Telcontar systemd 1 - - Stopped LSB: AppArmor initialization. > <10.3> 2013-06-13 10:33:01 Telcontar 30048 - - > pam_apparmor(crond:session): Unknown error occurred changing to > news hat: Operation not permitted <0.4> 2013-06-13 10:33:01 > Telcontar kernel - - - [61887.325090] audit_printk_skb: 63 > callbacks suppressed <0.5> 2013-06-13 10:33:01 Telcontar kernel - - > - [61887.325094] type=1400 audit(1371112381.100:441): > apparmor="DENIED" operation="change_hat" info="unconfined" error=-1 > pid=30048 comm="cron" - -rw-r----- 1 news news 223153 Jun 12 22:18 /var/log/news/news.notice - -rw-r----- 1 news news 0 Jun 12 22:21 /var/log/news/news.debug Actually, it is syslog who fails to work (it is running). I restarted it and messages flow to the log again. - -- Cheers / Saludos, Carlos E. R. (from 12.3 x86_64 "Dartmouth" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iEYEARECAAYFAlG5hXoACgkQtTMYHG2NR9WBGACdFT6TNzRD5HzemY1jm4aeBJ/n WwAAn173sFuumb1N1sJghf2RCPWNfjAm =8AMk -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Why does yast use 127.0.0.2 for localhost?
by Carlos E. R. 13 Jun '13

13 Jun '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Everytime I use YaST to configure the network, it adds this line to /etc/hosts: 127.0.0.2 Telcontar.valinor Telcontar That line provokes postfix into failure - one message per minute in the logs: .... fatal: parameter inet_interfaces: no local interface found for 127.0.0.2 and has to be deleted manually every time. Notice that I have this: 127.0.0.1 localhost 192.168.1.14 Telcontar.valinor Telcontar What's the use of 127.0.0.2, why does yast insist on creating it? Why not 127.0.0.1? What is wrong that postfix does not work with it? Is this a bug somewhere, or did I configure something wrong? - -- Cheers / Saludos, Carlos E. R. (from 12.3 x86_64 "Dartmouth" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iEYEARECAAYFAlG0xeUACgkQIvFNjefEBxpowQCfccfYupIzAwSbrYa4XF6k3OLB u98AoNu1rfhZjMTOQ8NjTKi+UTrdJGZh =CbUR -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 28

[opensuse] OS 12.3 udev hangs while booting
by Malte Gell 12 Jun '13

12 Jun '13

While booting the system again several times I encountered a strange error message while booting: systemd-udevd[239]: worker [268] /devices/pci0000:00/0000:00:1d.2/usb7/7-0:1.0 timeout; kill it There is the string "usb7" within the message, but I did *not* have any USB devices connected to the system. How can I find out what PCI device thi is? Below is the output of lspci. System is plain openSUSE 12.3 with current updates. Thanx Malte 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.3 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce G210M] (rev a2) 01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) 02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe (rev 10) 03:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 [Condor Peak] -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

11 33

[opensuse] Changed Enigmail behaviour - or problem somewhere?
by Carlos E. R. 12 Jun '13

12 Jun '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I have several PGP keys, lets say one per mail address. I send one email using address A, sent to address C, I get asked for key 1 I send another email using address B, sent to address C, I do not get asked for key. Checking the email got at address C, both were signed with key 1, but the second email should have used key 2. In preferences I have set "select key based on email". Is this a bug? It was not present when I used 12.1 about a week ago. - -- Cheers / Saludos, Carlos E. R. (from 12.3 x86_64 "Dartmouth" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iEYEARECAAYFAlG4UdgACgkQIvFNjefEBxqcGACfbE/L54qbSPpglwMORa0G2ggy ll4AoMQPQ++zHPfEpFuCZjBtCpxY8elp =MuSE -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1

[opensuse] rpcbind ignores RPCBIND_OPTIONS
by Philippe Andersson 12 Jun '13

12 Jun '13

Hello, On OpenSuSE 12.3, the contents of the variable RPCBIND_OPTIONS (defined in /etc/sysconfig/rpcbind) is completely ignored by the startup process. Is there a way to tell the service file (/usr/lib/systemd/system/rpcbind.service) to take the sysconfig file into consideration ? I tried just adding the line: EnvironmentFile=-/etc/sysconfig/rpcbind in the [Service] section, but that's clearly not enough. Any idea ? TIA Cheers. Bye. Ph. A. -- *Philippe Andersson* Unix System Administrator IBA Particle Therapy | Tel: +32-10-475.983 Fax: +32-10-487.707 eMail: pan(a)iba-group.com <http://www.iba-worldwide.com>

2 2