July 2012 - openSUSE Users - openSUSE Mailing Lists

[opensuse] FormControl-Handbuch: 7.4.9. Sonstiges
by Herbert Graeber 06 Jul '12

06 Jul '12

7.4.9. Sonstiges *Kritischer Winkel:* FormControl erlaubt das Abtasten leichter Hinterschnitte. Der Grenzwert für noch tastbare Hinterschnitte wird mit dem hier einzugebenden Winkel definiert. Es ist zu beachten, dass für alle Messungen an Hinterschnittsflächen die Kompensationswerte vom Äquator der Kalibrier-Kugel verwendet werden. Außerdem wird dieser Winkel für die Entscheidung verwendet, ob bei einer 5-Achs-Kinematik eine Ausrichtung durch Verwendung der Drehachsen angepasst werden soll, oder durch Anpassung des Messpfads, wie bei einer 3-Achs-Maschine, für den Fall, dass der Winkel der Ausrichtung zur Z-Asche nur gering ist. *Übertasten:* Wenn die Lage des Bauteils stark von der Nulllage abweicht, kann es passieren, dass bei einigen Punkten eine Messung abgebrochen wird, bevor das Teil erreicht wird. Hier kann eingestellt werden, um wieviel der Messweg verlängert werden soll, damit das Teil trotzdem gemessen werden kann. *Parallelität: *max. Winkel bis zu dem die Achsen von Geometrie-Elementen noch als parallel betrachtet werden. Da mit parallelen Elementen mehr Berechnungen durchgeführt werden können (z. B. Berechnung eines Abstandes), gemessene Elemente aber nicht immer exakt parallel sind, kann es nötig sein hier einen kleinen Winkel einzutragen. *Maximalgröße: *Bei der Standardeinstellung von 10m (bezogen auf den Nullpunkt) können alle Berechnungen auf 1µm genau durchgeführt werden. Möchte man größere Teile messen kann man hier einen größeren Wert eintragen, verbunden mit einer entsprechend kleineren Genauigkeit. *Ausrichtung automatisch anzeigen: *Hier kann gewählt werden, ob nach der Messung einer Ausrichtung der Eigenschaftsdialog mit dem Ausrichtungsergebnis automatisch angezeigt werden soll. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] oS12.1 starts only in failsafe mode
by Oszkó Albert 06 Jul '12

06 Jul '12

Hi all, After the last software update, oS starts only in the failsafe mode, normal (auto) login gives only a prompt, and I can log into the command line. I suspect, the cause is the newly installed fglrx-xpic driver. After unistalling it, the system start, but the widgets are moved to another place in the screen. Executing startx from command line gives fatal error about setting setuid, ata_piix and some other, but they disapper too fast. How can I go back to normal operation? Thanks: OszkoA oS 12.1 32 bit, KDE 4.8.4, ATI Radeon HD 4350 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Python Scripting Failure after LibO 3.4->3.5 Upgrade (SuSE 12.1 x64)
by andreil1 06 Jul '12

06 Jul '12

Hi ! After upgrade from LibO 3.4 to 3.5 (on SuSE 12.1 x64) all my Python macros have stopped working with very long error message (below). All my Python scripts located in the same location as before: ~user/.libreoffice/3-suse/user/Scripts/python/ At a glance, looks like LibO python module can't properly locate scripts anymore for whatever reason (maybe internal API changes I'm not aware of). Anyone can suggest me what might go wrong? Thanks in advance. ******************************** Error Messagee ******************************** BASIC runtime error. An exception occurred. Type: com.sun.star.script.provider.ScriptFrameworkErrorExceptionMessage: <class 'uno_component.com.sun.starucb.InteractiveAugmentedIOException'>: an error occured during file opening /usr/lib64/libreoffice/share/extensions/script-provider-for-python/pythonscript.py:376 in function getModuleByURL() [lastRead = self.sfa.getDateTimeModified(url)] /usr/lib64/libreoffice/share/extensions/script-provider-for-python/pythonscript.py:900 in function getScript() [mod = self.provCtx.getModuleByUrl(fileUrl)] ********************************-- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Gnome 3.2.1 Freezing
by Adam Sailer 06 Jul '12

06 Jul '12

I'm having a problem with Gnome 3.2.1 freezing, on average once a day. I have been unable to figure out why or how to reproduce the problem in a predictable manner. It just happens when I'm interacting with the computer; Sometimes when I launch an application, sometimes when I'm in 'Activities' view... no apparent common denominator. When this happens, the Gnome desktop just freezes, with the exception of the mouse pointer - I can move it around. I can Ctrl-Alt-F1, login to a terminal, and see that my processes are still running. When I Ctrl-Alt-F7 back to my graphical desktop, it is completely black with the mouse pointer still moveable. If I'm running my VM [W7 as a VMware Player 4.0.4 guest], I can RDP to it from another computer and see that it is running fine. I can SSH to the host machine, and my SMB shares are working fine. have to remote in to properly shut down the VM, and then either 'init 3 / init 5', Ctrl-Alt-Backspace, or just issue a reboot command. I don't see anything obvious in /var/log/messages. System: openSUSE 12.1 x64 Gnome 3.2 3.1.10-1.13-desktop #1 SMP PREEMPT Tue Jun 12 13:11:31 UTC 2012 (44a489e) x86_64 x86_64 x86_64 GNU/Linux nVidia GeForce GT240, driver ver 295.59 x64 (nouveau driver does not work at all) Intel MB, Intel Core i5 CPU 661 @ 3.33 GHz x 4, 4.0 GB DDR3. I can provide more specific info if needed) This has happened for quite some time, through various kernel and nVidia driver versions. Any ideas on how I might resolve this issue? What log(s) should I be looking at? Thank you, AdamS. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] KNetdump / Qtraffic successor?
by Stefan Gofferje 05 Jul '12

05 Jul '12

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, during KDE 1.x times, I loved to used knetdump to monitor what's going on in my local network. Now I have some absurd traffic values on my central server and I was looking for a tool which provides a similar traffic display because that very easily identifies bandwidth-eaters. I found the source for qtraffic but could get it to compile - well, it's for Qt 2.2... Does anybody know a program (for Linux/Opensuse, of course) which provides a similar display output? For those who don't know knetdump/qtraffic: Those programs provided a "traffic view" which showed each network node as a dot and then drew lines in different colors between the nodes, the color representing the protocol, the width of the line representing the bandwidth in use. See http://nisbach.de/knetdump/ http://nisbach.de/knetdump/ktrafficview.gif - -- (o_ Stefan Gofferje | SCLT, MCP, CCSA //\ Reg'd Linux User #247167 | VCP #2263 V_/_ Heckler & Koch - the original point and click interface -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.18 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk/0mWUACgkQbQKZlCdPOMO0lwCcCsf5SJocsGeN4nbUG4+cOv/y VMUAn0iADLQ0SeK0O1viSREDDH3SvsqG =Mp90 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 8

[opensuse] System Monitor - CPU at max
by James Knott 05 Jul '12

05 Jul '12

I have previously mentioned the extremely poor performance of my main computer, since updating to openSUSE 12.1. On this computer, System Monitor shows CPU history solidly at 100%, only occasionally dropping. Memory and Swap shows memory at 1.5 G of 2.9 and swap at 0.04 of 8. Sometimes the computer bogs down do much that it's essentially unusable. It's a 64 bit AMD CPU & 3 GB of memory and it ran 11.0 very well. Below is a recent "top" capture showing significant amounts of CPU and memory being used by plugin-container and Xorg. I have disabled flash in Seamonkey and Firefox browsers. I have also tried both NVidia and Nouveau video drivers. I even tried turning off PAE support in the BIOS, as it's not necessary with 64 bit and also less than 4 GB of memory. Any idea as to what's causing the performance hog? What I can check? A notebook, also running 12.1, does not exhibit this behaviour. On it, Xorg is running about 3% CPU and 0.5% memory (4 GB installed). Plugin-container doesn't seem to be running on that computer. Can it be turned off? If I reboot the computer or restart the desktop, performance is temporarily better, though not what it should be. tnx jk Tasks: 196 total, 5 running, 189 sleeping, 0 stopped, 2 zombie Cpu(s): 86.3%us, 13.0%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 0.7%si, 0.0%st Mem: 3088796k total, 2479776k used, 609020k free, 173100k buffers Swap: 8388600k total, 43604k used, 8344996k free, 829156k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 5303 jknott 20 0 603m 96m 29m R 59.4 3.2 2713:28 plugin-containe 3743 root 20 0 484m 151m 22m R 21.6 5.0 768:44.25 Xorg 4620 jknott 20 0 474m 7096 4188 S 4.3 0.2 37:02.39 pulseaudio 8353 jknott 20 0 503m 52m 25m R 4.3 1.7 0:01.02 plugin-containe 4687 jknott 20 0 624m 39m 23m R 4.0 1.3 156:49.87 konqueror 8297 jknott 20 0 866m 194m 50m S 2.3 6.5 0:08.94 firefox-bin 4675 jknott 20 0 492m 25m 18m S 2.0 0.8 57:46.31 ksysguard 4477 jknott 20 0 955m 84m 27m S 0.3 2.8 15:13.98 plasma-desktop 4683 jknott 20 0 9072 1176 700 S 0.3 0.0 9:19.13 ksysguardd 4898 jknott 20 0 939m 130m 26m S 0.3 4.3 5:44.52 chromium 4913 jknott 20 0 1059m 119m 17m S 0.3 4.0 1:36.51 chromium 4917 jknott 20 0 916m 87m 16m S 0.3 2.9 2:38.82 chromium 1 root 20 0 12604 716 656 S 0.0 0.0 0:02.46 init 2 root 20 0 0 0 0 S 0.0 0.0 0:00.03 kthreadd -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

10 29

[opensuse] How to delete a symlink and the folder to which it points
by lynn 05 Jul '12

05 Jul '12

Hi I have symlinks created with ln -s which point to real folders. I want to delete both the folder and the symlink which points to it. I can do it by writing a script which ls -l's the symlink and cuts out the name of the folder but. . . I wondered if there was a one liner to do that. L x -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] LXC Ubuntu Containers Seg Fault on Starting
by Pete Eby 05 Jul '12

05 Jul '12

Hello, I'm having trouble getting LXC Ubuntu containers to configure or start correctly in OpenSuse 12.1. While I am able to create OpenSuse containers just fine using the LXC provided config scripts, any Ubuntu containers seg fault when starting. You can chroot into the container, though /proc, etc. is not available, and the container will not start via lxc-start. The examples below are for oneiric, but the same occurs for other Ubuntu releases. I've looked at /usr/lib64/lxc/templates/lxc-ubuntu and tried to run this directly (outside lxc-create) but have not been able to isolate the issue further. I would appreciate any suggestions anyone may have to help debug further. Thank you, Pete * * * * * * * Environments: * * * * * * * OpenSuse 12.1 2.6.37.6-0.5-desktop x86_64 lxc-0.7.5-4.5.1.x86_64 OpenSuse 12.1 3.4.0-compiled (from git.kernel.org) * * * * * Get Tools: * * * * * zypper install deb lxc wget http://download.opensuse.org/repositories/home:/flichtenheld/openSUSE_12.1/… rpm -ivh debootstrap-1.0.41-17.1.noarch.rpm * * * * * * * * * Create Container: * * * * * * * * * lxc-create -t ubuntu -n oneiric -f /usr/lib64/lxc/templates/lxc-ubuntu -- -r oneiric -a i386 It downloads the base Ubuntu packages and completes with: ... Download complete. Copy /var/cache/lxc/oneiric/rootfs-i386 to /var/lib/lxc/oneiric/rootfs ... Copying rootfs to /var/lib/lxc/oneiric/rootfs ...Please change root-password ! Reading package lists... Done Building dependency tree... Done The following NEW packages will be installed: lxcguest 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 6962 B of archives. After this operation, 115 kB of additional disk space will be used. WARNING: The following packages cannot be authenticated! lxcguest Get:1 http://archive.ubuntu.com/ubuntu/ oneiric/main lxcguest i386 0.7.5-0ubuntu8 [6962 B] Fetched 6962 B in 1s (4860 B/s) perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_CTYPE = "en_US.UTF-8", LANG = "POSIX" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package lxcguest. (Reading database ... 10108 files and directories currently installed.) Unpacking lxcguest (from .../lxcguest_0.7.5-0ubuntu8_i386.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up lxcguest (0.7.5-0ubuntu8) ... 'ubuntu' template installed 'oneiric' created callandor:~ # lxc-start --name oneiric Segmentation fault Starting with strace ends with: getuid() = 0 getgid() = 0 geteuid() = 0 brk(0) = 0x604000 brk(0x625000) = 0x625000 access("/var/lib/lxc/oneiric/config", F_OK) = 0 open("/var/lib/lxc/oneiric/config", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0755, st_size=13082, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f1e02c53000 read(3, "#!/bin/bash\n\n#\n# template script"..., 4096) = 4096 read(3, "ase'\"\n\t\treturn 1\n\t fi\n\tfi\n\n\te"..., 4096) = 4096 --- {si_signo=SIGSEGV, si_code=SEGV_MAPERR, si_addr=0x12} (Segmentation fault) --- +++ killed by SIGSEGV +++ Segmentation fault Section from /var/lib/lxc/oneiric/config where the last read occurs: echo "Checking cache download in $cache/rootfs-$arch ... " if [ ! -e "$cache/rootfs-$arch" ]; then download_ubuntu $cache $arch $release if [ $? -ne 0 ]; then echo "Failed to download 'ubuntu $release base'" return 1 fi fi (/var/cache/lxc/oneiric/rootfs-i386 exists) * * * * * * * * * Alt config methoc * * * * * * * * * Tried running the config script directy: bash /var/lib/lxc/oneiric/config --path /var/lib/lxc/oneiric/rootfs/ -r oneiric -a i386 callandor:~ # bash /var/lib/lxc/oneiric/config -p /var/lib/lxc/oneiric/ -a i686 -r oneiric debootstrap is /usr/sbin/debootstrap Checking cache download in /var/cache/lxc/oneiric/rootfs-i386 ... Copy /var/cache/lxc/oneiric/rootfs-i386 to /var/lib/lxc/oneiric//rootfs ... Copying rootfs to /var/lib/lxc/oneiric//rootfs ...Please change root-password ! /var/lib/lxc/oneiric/config: line 169: [: =: unary operator expected Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed: lxcguest 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/6962 B of archives. After this operation, 115 kB of additional disk space will be used. WARNING: The following packages cannot be authenticated! lxcguest perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_CTYPE = "en_US.UTF-8", LANG = "POSIX" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package lxcguest. (Reading database ... 10108 files and directories currently installed.) Unpacking lxcguest (from .../lxcguest_0.7.5-0ubuntu8_i386.deb) ... Can not write log, openpty() failed (/dev/pts not mounted?) Setting up lxcguest (0.7.5-0ubuntu8) ... /var/lib/lxc/oneiric/config: line 498: lxc.utsname: command not found /var/lib/lxc/oneiric/config: line 500: lxc.tty: command not found /var/lib/lxc/oneiric/config: line 501: lxc.pts: command not found /var/lib/lxc/oneiric/config: line 502: lxc.rootfs: command not found /var/lib/lxc/oneiric/config: line 503: lxc.mount: command not found /var/lib/lxc/oneiric/config: line 504: lxc.arch: command not found /var/lib/lxc/oneiric/config: line 506: lxc.cgroup.devices.deny: command not found /var/lib/lxc/oneiric/config: line 508: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 509: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 511: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 512: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 516: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 517: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 518: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 519: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 521: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 523: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 524: lxc.utsname: command not found /var/lib/lxc/oneiric/config: line 526: lxc.tty: command not found /var/lib/lxc/oneiric/config: line 527: lxc.pts: command not found /var/lib/lxc/oneiric/config: line 528: lxc.rootfs: command not found /var/lib/lxc/oneiric/config: line 529: lxc.mount: command not found /var/lib/lxc/oneiric/config: line 530: lxc.arch: command not found /var/lib/lxc/oneiric/config: line 532: lxc.cgroup.devices.deny: command not found /var/lib/lxc/oneiric/config: line 534: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 535: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 537: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 538: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 542: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 543: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 544: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 545: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 547: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 549: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 550: lxc.utsname: command not found /var/lib/lxc/oneiric/config: line 552: lxc.tty: command not found /var/lib/lxc/oneiric/config: line 553: lxc.pts: command not found /var/lib/lxc/oneiric/config: line 554: lxc.rootfs: command not found /var/lib/lxc/oneiric/config: line 555: lxc.mount: command not found /var/lib/lxc/oneiric/config: line 556: lxc.arch: command not found /var/lib/lxc/oneiric/config: line 558: lxc.cgroup.devices.deny: command not found /var/lib/lxc/oneiric/config: line 560: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 561: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 563: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 564: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 568: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 569: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 570: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 571: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 573: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 575: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 576: lxc.utsname: command not found /var/lib/lxc/oneiric/config: line 578: lxc.tty: command not found /var/lib/lxc/oneiric/config: line 579: lxc.pts: command not found /var/lib/lxc/oneiric/config: line 580: lxc.rootfs: command not found /var/lib/lxc/oneiric/config: line 581: lxc.mount: command not found /var/lib/lxc/oneiric/config: line 582: lxc.arch: command not found /var/lib/lxc/oneiric/config: line 584: lxc.cgroup.devices.deny: command not found /var/lib/lxc/oneiric/config: line 586: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 587: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 589: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 590: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 594: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 595: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 596: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 597: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 599: lxc.cgroup.devices.allow: command not found /var/lib/lxc/oneiric/config: line 601: lxc.cgroup.devices.allow: command not found -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Automatic option synaptics driver gone from settings.
by Odd Ball 05 Jul '12

05 Jul '12

Hi, I now use 12.1 on an eeepc seashell series . I noticed that a very important option: disable pad when typing, and the time to set pad active again, are gone from the touchpad setting menu, in systemsettings. Is there a way to get that option back? You have no idea how annoying it is when you're typing, and suddenly the cursor is taken over by mouseposition. And have to copy, cut and paste the lines that are somewhere into some other teksts inserted.. Regards, Rob. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 9

[opensuse] unclear message after update of java-1_6_0
by Constant Brouerius van Nidek 05 Jul '12

05 Jul '12

After the latest zypper dup I got an update for java-1_6_0- openjdk-1.6.0.0_b24.1.11.3-6.2. The accompanying text gives me additional rpm output. I am trying to make sense of the warnings. Can somebody help me out? Should I take action and if yes, what? ------------------- Installing: java-1_6_0-openjdk-1.6.0.0_b24.1.11.3-6.2 [done] Additional rpm output: update-alternatives: warning: forcing reinstallation of alternative /usr/lib/jvm/jre-1.6.0-openjdk/bin/java because link group java is broken. update-alternatives: warning: not replacing /usr/share/applications/policytool.desktop with a link. -- Linux User 183145 using KDE4 on a Pentium IV , powered by openSUSE 12.1 (i586) Kernel: 3.4.3-30-default KDE Development Platform: 4.8.4 (4.8.4) "release 513") 18:33pm up 18:00, 3 users, load average: 1.26, 1.30, 1.12 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 6