February 2012 - openSUSE Users - openSUSE Mailing Lists

[opensuse] KDE 4.7.4
by Scott Newton 12 Feb '12

12 Feb '12

Hi When will the standard (default) opensuse repos be updated to 4.7.4. Kubuntu has already been updated to latest bug fix release of 4.7. Thanks -- Regards Scott Newton -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 5

[opensuse] KDE 4.8
by Swapnil Bhartiya 11 Feb '12

11 Feb '12

When can we expect KDE 4.8 update on openSUSE 12.1? Swapnil -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 33

[opensuse] Problems with PDF - Seamonkey & Firefox
by James Knott 11 Feb '12

11 Feb '12

I have noticed some problems with opening PDFs in Firefox and Seamonkey, but not Konqueror browsers. When they fail, I get a blank or black display. Here is one link that I tried today: http://ryerson.ca/content/dam/currentstudents/forms/OfficialTranscriptReque… Konqueror has no problem with this link, but Firefox and Seamonkey both choke on it. This is on 64 bit 12.1 and Adobe reader is installed. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 18

[opensuse] 11.4 - Sound 'play' symbol lookup error: /usr/lib64/libpulsecommon-0.9.22.so: undefined
by David C. Rankin 11 Feb '12

11 Feb '12

Guys, I have a sound issue with play. When I attempt to play a sound file from the command line in konqueror I get: > play Startup1_4.ogg play: symbol lookup error: /usr/lib64/libpulsecommon-0.9.22.so: undefined symbol: STRING Is anyone else seeing this? I know this just started within the last few weeks, because I was using play not too long ago. Is this a new libpulse0 bug or sox? Hard to tell on this end :( -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 7

[opensuse] What mixer controls .............
by Duaine Hechler 11 Feb '12

11 Feb '12

I just bought a new motherboard with this sound setup: 82801G (ICH7 Family) High Definition Audio Controller (ASUS + Intel ) and kmix or pavucontrol does not control it fully. So far the only option is YAST. On would think, that their is a mixer for this ...... Thanks in advance, Duaine -- Duaine Hechler Piano, Player Piano, Pump Organ Tuning, Servicing& Rebuilding Reed Organ Society Member Florissant, MO 63034 (314) 838-5587 dahechler(a)att.net www.hechlerpianoandorgan.com -- Home& Business user of Linux - 11 years -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Howto start cifs daemon for automounting shares?
by Andreas 11 Feb '12

11 Feb '12

Hi, I've got samba running on an OpenSuse 12.1. I can manually mount external shares. Then I entered apparently suitable lines in /etc/samba/cifstab but the shares aren't automatically mounted on boot time. This is ignored. Nothing gets mounted and there is no error in the smb.log. I found a refernce that I need to start the cifs service in Yast-->Runlevel. I set it to runlevel 3+5 and tried to start it imediatly in yast. When I try this I get the error : /etc/init.d/cifs start returned 6 (program not configured) Can someon point me in the right direction, please? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 6

[opensuse] Interesting "webpin" alternative solution
by Greg Freemyer 11 Feb '12

11 Feb '12

All, I just inadvertently typed: > osc se -s yara #################################################################### matches for 'yara' in projects: # Project home:sjayaraman home:suryaraj17 #################################################################### matches for 'yara' in packages: # Project # Package home:gregfreemyer:Tools-for-forensic-boot-cd python-yara home:gregfreemyer:Tools-for-forensic-boot-cd yara security python-yara security yara ---------------------------- So that appears to have searched all of OBS for projects with "yara" in their name, and then for packages with "yara" in their name. I just some might find that of interest since webpin has been dead for a year or two. Greg -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 4

[opensuse] OpenSuSE 12.1: syslog-ng don't start automatically at boot time
by Claudio Prono 10 Feb '12

10 Feb '12

Hello all, Fresh installed OpenSuSE 12.1 x64. I have changed the default syslog to syslog-ng, because i need it. De-installed rsyslogd (don't need it). When i do an rcsyslog start, i have that result: rcsyslog start redirecting to systemctl Job failed. See system logs and 'systemctl status' for details. systemctl status syslog.service syslog.service - System Logging Service Loaded: loaded (/lib/systemd/system/syslog.service; enabled) Active: failed since Fri, 03 Feb 2012 14:43:24 +0100; 17s ago Process: 26651 ExecStart=/sbin/rsyslogd -c 5 -f /etc/rsyslog.early.conf (code=exited, status=203/EXEC) Process: 26648 ExecStartPre=/var/run/rsyslog/addsockets (code=exited, status=0/SUCCESS) Process: 26646 ExecStartPre=/bin/systemctl stop systemd-kmsg-syslogd.service (code=exited, status=0/SUCCESS) Main PID: 23644 (code=exited, status=0/SUCCESS) CGroup: name=systemd:/system/syslog.service Clearly, it try to execute rsyslogd, but i have changed the config of /etc/sysconfig/syslog to: SYSLOG_DAEMON="syslog-ng" There is some type of bug about this? Or i am missing something new of the new OpenSuSE 12.1? Btw, if i try to execute syslog-ng manually, it works, with some errors: syslog-ng -f /etc/syslog-ng/syslog-ng.conf Plugin module not found in 'module-path'; module-path='/lib64/syslog-ng:/usr/lib64/syslog-ng', module='afsql' WARNING: the match() filter without the use of the value() option is deprecated and hinders performance, please update your configuration; Second error can be patched, but the first... missing a module? Need help on this pls. Cordially, Claudio Prono. -- ---------------------------------------------------------------------------- Claudio Prono OPST System Developer @ Mediaservice.net Srl Tel: +39-011-32.72.100 Via Santorelli, 15 Fax: +39-011-32.46.497 10095 Grugliasco (TO) ITALY http://mediaservice.net/disclaimer ---------------------------------------------------------------------------- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] KDM Theme
by Dmitry A. Ashkadov 10 Feb '12

10 Feb '12

Hello! Is it possible to change KDM theme? Systemsettings doesn't help me. It generates new config in /usr/share/kde4/config/kdm, but real KDM theme isn't changed. Thank you. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 3

[opensuse] Search Menus in KDE?
by Swapnil Bhartiya 10 Feb '12

10 Feb '12

Hi, Is there any feature in KDE where one can search menu items of the program? Someone was telling me at FOSDEM while discussing HUD that KDE used to have such a feature or a patch. Best Swapnil -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 24

[opensuse] Blocked acces to opensuse web site
by NITA BUDD 10 Feb '12

10 Feb '12

I am not able to access the "www.opensuse.org" web site. Using "www.opensuse.org" only produces, after a long delay, a "Problem loading page" message. I am using opensuse 11.1 If I change to another computer on my nat local network which is running opensuse 10.2 my access is ok. Neither computers has any problems with access to say "www.w3.org" or many others. Does "www.opensuse.org" web server have any blocking based on say mac address? What mailing list is most appropriate to ask this question on? Regards Sinclair -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 7

[opensuse] Howto connect a 12.1 to a Windows VPN?
by Andreas 10 Feb '12

10 Feb '12

Hi, is there a howto to connect a 12.1 to a Windows VPN? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 5

Re: [opensuse] sshd compaines about missing dsa-key ?
by Dmitry A. Ashkadov 10 Feb '12

10 Feb '12

10.02.2012 15:18, Andreas пишет: > Hi, > I found a lot of errors from sshd in /var/log/messages but ssh works, > though. > > sshd[9448]: error: Could not load host key: /etc/ssh/ssh_host_dsa_key > > Well, obviously it can't load that key as there is no such file. > The OpenSuse 12.1 install didn't create it so I suppose that is > intentionally. > > Do I need this key or how can I stop sshd looking for the file? > Temporary solution is to change length of dsa key in /etc/init.d/sshd: ssh-keygen -t dsa -b *1024* .... -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] sshd compaines about missing dsa-key ?
by Andreas 10 Feb '12

10 Feb '12

Hi, I found a lot of errors from sshd in /var/log/messages but ssh works, though. sshd[9448]: error: Could not load host key: /etc/ssh/ssh_host_dsa_key Well, obviously it can't load that key as there is no such file. The OpenSuse 12.1 install didn't create it so I suppose that is intentionally. Do I need this key or how can I stop sshd looking for the file? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] nfs4 takes up 90% of CPU
by lynn 10 Feb '12

10 Feb '12

Hi 12.1 Using a secured nfs4 mount takes a hell of a lot of processing power: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 3540 root 20 0 4092 896 856 R 96.5 0.2 18:58.78 rpc.gssd mount shows: hh3:/home/ on /mnt type nfs4 (rw,relatime,vers=4,rsize=65536,wsize=65536,namlen=255,hard,proto=tcp,port=0,timeo=600,retrans=2,sec=krb5,clientaddr=192.168.1.3,minorversion=0,local_lock=none,addr=192.168.1.3) I accept that Kerberos will take it's toll, but this much? I've a bugzilla against rpc.svcgssd (which I think is deprecated but still used in openSUSE) so this maybe related. No luck yet however. https://bugzilla.novell.com/show_bug.cgi?id=745412 I think that this must be an openSUSE issue as an Ubuntu client can mount the share with very little gss activity. Meanwhile, could anyone see anything suspicious in the mount output above? Thanks, L x -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

Re: [opensuse] What is this Nepomukfilemanager ? and how do I get rd of it ?
by Rodney Baker 10 Feb '12

10 Feb '12

On Fri, 10 Feb 2012 08:11:56 Duaine Hechler wrote: > This silly little task, at every boot, just chokes down my hard drive. > > I tried deleting it on my own - but - it breaks a whole bunch of stuff. > > So.... how do I get rid of it ? > > Thanks, Duaine Personal Settings (Configure Desktop) -> Desktop Search Basic Settings Tab: Uncheck "Enable Nepomuk Semantic Desktop (Apply) -- =================================================== Rodney Baker VK5ZTV rodney.baker(a)iinet.net.au =================================================== -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 2

[opensuse] Network printing problem
by Graham Lauder 10 Feb '12

10 Feb '12

Greetings I'm not great at networking stuff so I've probably missed something obvious, but I have a Lexmark Optra S printer. It has no ethernet connection but I want to hook it up to the network so the wife can use it rather using the obscenely expensive to run Canon bubblejet thing. So I got a TP-Link print server and hooked it up. And this is where it gets odd. I can ping the print server, I changed the ip address to match our subnet (10.0... etc, default was 192.168.etc) via my browser. But for some odd reason when I try to get the printer setup in YAST (I use OpenSuSE 11.4) it can't locate it. Anyone have any ideas? Firewall is switched off. Main machine has a fixed ip 10.1.1.3, print server is 10.1.1.10, samba is running. DHCP is not Annoyingly, I have Win 7 running in a Virtualbox instance on this machine and that prints no problem. So that would seem to narrow it down to CUPS. But I set it up in CUPS and it says it's not there The print server knows the printer is there and I can ping the print server and get into the admin via a browser and do all the settings Hair on right hand side of head is thin from scratching. Cheers Yo -- Graham Lauder ApacheOpenOffice Project Management Committee -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Shutdown / Boot / Reiserfs / journal replay
by Duaine Hechler 09 Feb '12

09 Feb '12

I really don't remember this doing this but, every time I reboot, the reiserfs has to replay the journals. I thought on shutdown the fs cleans itself up (or ? commits everything to disk) ? Even after a fsck it still does the journal replay on reboot. Thanks in advance, Duaine -- Duaine Hechler Piano, Player Piano, Pump Organ Tuning, Servicing& Rebuilding Reed Organ Society Member Florissant, MO 63034 (314) 838-5587 dahechler(a)att.net www.hechlerpianoandorgan.com -- Home& Business user of Linux - 11 years -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

Re: [opensuse] Nepomuk stub x6]
by Mark Misulich 09 Feb '12

09 Feb '12

> > > > On Thu, Feb 9, 2012 at 9:15 AM, Mark Misulich <munguanaweza(a)gmail.com> wrote: > > > Hi, > > > when I boot up my desktop computer with opensuse 12.1 and KDE 4.8.0 > > > (4.8.0 "release 2", I always get a message saying Nepomuk stub has > > > crashed. > > > > > > If I try to restart the application, or just close the message, I have > > > to restart/close it 6 times before the message goes away for good. It > > > doesn't seem to be a time dependant thing, like I am need to wait an > > > equivalent time required to close the application 6 times and then just > > > close it once. I have to close it six times, then the notification goes > > > away and the computer works like normal. > > > > > > > could you post "/var/log/Xorg.0.log", might be some gObject issue. > > Never faced this before. Hi, here is the log. I did an update last evening and today the computer is no longer having the problem with the Nepomux Stub on startup. It has been doing it for about the last three weeks, and I had not written to the list thinking that eventually an update would fix the problem. So I don't know if this log will reflect any problem now. [ 29.349] X.Org X Server 1.10.4 Release Date: 2011-08-19 [ 29.349] X Protocol Version 11, Revision 0 [ 29.349] Build Operating System: openSUSE SUSE LINUX [ 29.349] Current Operating System: Linux linux-duc8 3.1.9-1.4-desktop #1 SMP PREEMPT Fri Jan 27 08:55:10 UTC 2012 (efb5ff4) x86_64 [ 29.349] Kernel command line: root=/dev/disk/by-id/ata-ST3500418AS_5VMALG29-part6 resume=/dev/disk/by-id/ata-ST3500418AS_5VMALG29-part5 splash=silent quiet vga=0x317 [ 29.349] Build Date: 10 November 2011 03:34:36PM [ 29.349] [ 29.349] Current version of pixman: 0.24.0 [ 29.349] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 29.349] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 29.349] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 9 02:22:40 2012 [ 29.349] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 29.349] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 29.349] (==) No Layout section. Using the first Screen section. [ 29.349] (==) No screen section available. Using defaults. [ 29.349] (**) |-->Screen "Default Screen Section" (0) [ 29.349] (**) | |-->Monitor "<default monitor>" [ 29.350] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 29.350] (==) Automatically adding devices [ 29.350] (==) Automatically enabling devices [ 29.368] (==) FontPath set to: /usr/share/fonts/misc:unscaled, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi:unscaled, /usr/share/fonts/75dpi:unscaled, /usr/share/fonts/URW/, /usr/share/fonts/cyrillic:unscaled, /usr/share/fonts/truetype/, built-ins [ 29.368] (==) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules" [ 29.368] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 29.368] (II) Loader magic: 0x7d9140 [ 29.368] (II) Module ABI versions: [ 29.368] X.Org ANSI C Emulation: 0.4 [ 29.368] X.Org Video Driver: 10.0 [ 29.368] X.Org XInput driver : 12.2 [ 29.368] X.Org Server Extension : 5.0 [ 29.369] (--) PCI:*(0:1:0:0) 10de:0614:196e:0719 rev 162, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf4000000/33554432, I/O @ 0x0000ef00/128, BIOS @ 0x????????/131072 [ 29.369] (--) PCI: (0:5:2:0) 14f1:8800:1002:00f8 rev 5, Mem @ 0xf9000000/16777216 [ 29.369] (II) Open ACPI successful (/var/run/acpid.socket) [ 29.369] (II) LoadModule: "extmod" [ 29.394] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so [ 29.394] (II) Module extmod: vendor="X.Org Foundation" [ 29.394] compiled for 1.10.4, module version = 1.0.0 [ 29.394] Module class: X.Org Server Extension [ 29.394] ABI class: X.Org Server Extension, version 5.0 [ 29.394] (II) Loading extension MIT-SCREEN-SAVER [ 29.394] (II) Loading extension XFree86-VidModeExtension [ 29.394] (II) Loading extension XFree86-DGA [ 29.394] (II) Loading extension DPMS [ 29.394] (II) Loading extension XVideo [ 29.394] (II) Loading extension XVideo-MotionCompensation [ 29.394] (II) Loading extension X-Resource [ 29.394] (II) LoadModule: "dbe" [ 29.394] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so [ 29.394] (II) Module dbe: vendor="X.Org Foundation" [ 29.394] compiled for 1.10.4, module version = 1.0.0 [ 29.394] Module class: X.Org Server Extension [ 29.394] ABI class: X.Org Server Extension, version 5.0 [ 29.394] (II) Loading extension DOUBLE-BUFFER [ 29.394] (II) LoadModule: "glx" [ 29.394] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so [ 29.394] (II) Module glx: vendor="X.Org Foundation" [ 29.394] compiled for 1.10.4, module version = 1.0.0 [ 29.394] ABI class: X.Org Server Extension, version 5.0 [ 29.394] (==) AIGLX enabled [ 29.394] (II) Loading extension GLX [ 29.394] (II) LoadModule: "record" [ 29.394] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so [ 29.395] (II) Module record: vendor="X.Org Foundation" [ 29.395] compiled for 1.10.4, module version = 1.13.0 [ 29.395] Module class: X.Org Server Extension [ 29.395] ABI class: X.Org Server Extension, version 5.0 [ 29.395] (II) Loading extension RECORD [ 29.395] (II) LoadModule: "dri" [ 29.395] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so [ 29.395] (II) Module dri: vendor="X.Org Foundation" [ 29.395] compiled for 1.10.4, module version = 1.0.0 [ 29.395] ABI class: X.Org Server Extension, version 5.0 [ 29.395] (II) Loading extension XFree86-DRI [ 29.395] (II) LoadModule: "dri2" [ 29.395] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so [ 29.395] (II) Module dri2: vendor="X.Org Foundation" [ 29.395] compiled for 1.10.4, module version = 1.2.0 [ 29.395] ABI class: X.Org Server Extension, version 5.0 [ 29.395] (II) Loading extension DRI2 [ 29.395] (==) Matched nvidia as autoconfigured driver 0 [ 29.395] (==) Matched nouveau as autoconfigured driver 1 [ 29.395] (==) Matched nv as autoconfigured driver 2 [ 29.395] (==) Matched fbdev as autoconfigured driver 3 [ 29.395] (==) Matched vesa as autoconfigured driver 4 [ 29.395] (==) Assigned the driver to the xf86ConfigLayout [ 29.395] (II) LoadModule: "nvidia" [ 29.409] (WW) Warning, couldn't open module nvidia [ 29.409] (II) UnloadModule: "nvidia" [ 29.409] (II) Unloading nvidia [ 29.409] (EE) Failed to load module "nvidia" (module does not exist, 0) [ 29.409] (II) LoadModule: "nouveau" [ 29.409] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so [ 29.409] (II) Module nouveau: vendor="X.Org Foundation" [ 29.409] compiled for 1.10.4, module version = 0.0.16 [ 29.409] Module class: X.Org Video Driver [ 29.409] ABI class: X.Org Video Driver, version 10.0 [ 29.409] (II) LoadModule: "nv" [ 29.410] (II) Loading /usr/lib64/xorg/modules/drivers/nv_drv.so [ 29.410] (II) Module nv: vendor="X.Org Foundation" [ 29.410] compiled for 1.10.4, module version = 2.1.18 [ 29.410] Module class: X.Org Video Driver [ 29.410] ABI class: X.Org Video Driver, version 10.0 [ 29.410] (II) LoadModule: "fbdev" [ 29.410] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so [ 29.410] (II) Module fbdev: vendor="X.Org Foundation" [ 29.410] compiled for 1.10.4, module version = 0.4.2 [ 29.410] ABI class: X.Org Video Driver, version 10.0 [ 29.410] (II) LoadModule: "vesa" [ 29.411] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so [ 29.411] (II) Module vesa: vendor="X.Org Foundation" [ 29.411] compiled for 1.10.4, module version = 2.3.0 [ 29.411] Module class: X.Org Video Driver [ 29.411] ABI class: X.Org Video Driver, version 10.0 [ 29.411] (II) NOUVEAU driver [ 29.411] (II) NOUVEAU driver for NVIDIA chipset families : [ 29.411] RIVA TNT (NV04) [ 29.411] RIVA TNT2 (NV05) [ 29.411] GeForce 256 (NV10) [ 29.411] GeForce 2 (NV11, NV15) [ 29.411] GeForce 4MX (NV17, NV18) [ 29.411] GeForce 3 (NV20) [ 29.411] GeForce 4Ti (NV25, NV28) [ 29.411] GeForce FX (NV3x) [ 29.411] GeForce 6 (NV4x) [ 29.411] GeForce 7 (G7x) [ 29.411] GeForce 8 (G8x) [ 29.411] GeForce GTX 200 (NVA0) [ 29.411] GeForce GTX 400 (NVC0) [ 29.411] (II) NOUVEAU driver [ 29.411] (II) NOUVEAU driver for NVIDIA chipset families : [ 29.411] RIVA TNT (NV04) [ 29.411] RIVA TNT2 (NV05) [ 29.411] GeForce 256 (NV10) [ 29.411] GeForce 2 (NV11, NV15) [ 29.411] GeForce 4MX (NV17, NV18) [ 29.411] GeForce 3 (NV20) [ 29.411] GeForce 4Ti (NV25, NV28) [ 29.411] GeForce FX (NV3x) [ 29.411] GeForce 6 (NV4x) [ 29.411] GeForce 7 (G7x) [ 29.411] GeForce 8 (G8x) [ 29.411] GeForce GTX 200 (NVA0) [ 29.411] GeForce GTX 400 (NVC0) [ 29.411] (II) FBDEV: driver for framebuffer: fbdev [ 29.411] (II) VESA: driver for VESA chipsets: vesa [ 29.411] (++) using VT number 7 [ 29.412] drmOpenDevice: node name is /dev/dri/card0 [ 29.412] drmOpenDevice: open result is 9, (OK) [ 29.412] drmOpenByBusid: Searching for BusID pci:0000:01:00.0 [ 29.412] drmOpenDevice: node name is /dev/dri/card0 [ 29.412] drmOpenDevice: open result is 9, (OK) [ 29.412] drmOpenByBusid: drmOpenMinor returns 9 [ 29.412] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 [ 29.412] (II) [drm] nouveau interface version: 0.0.16 [ 29.412] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so [ 29.412] (WW) Falling back to old probe method for fbdev [ 29.412] (II) Loading sub module "fbdevhw" [ 29.412] (II) LoadModule: "fbdevhw" [ 29.413] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so [ 29.413] (II) Module fbdevhw: vendor="X.Org Foundation" [ 29.413] compiled for 1.10.4, module version = 0.0.2 [ 29.413] ABI class: X.Org Video Driver, version 10.0 [ 29.413] (WW) Falling back to old probe method for vesa [ 29.413] (II) Loading sub module "dri" [ 29.413] (II) LoadModule: "dri" [ 29.413] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so [ 29.413] (II) Module dri: vendor="X.Org Foundation" [ 29.413] compiled for 1.10.4, module version = 1.0.0 [ 29.413] ABI class: X.Org Server Extension, version 5.0 [ 29.413] (II) NOUVEAU(0): Loaded DRI module [ 29.413] drmOpenDevice: node name is /dev/dri/card0 [ 29.413] drmOpenDevice: open result is 10, (OK) [ 29.413] drmOpenDevice: node name is /dev/dri/card0 [ 29.413] drmOpenDevice: open result is 10, (OK) [ 29.413] drmOpenByBusid: Searching for BusID pci:0000:01:00.0 [ 29.413] drmOpenDevice: node name is /dev/dri/card0 [ 29.413] drmOpenDevice: open result is 10, (OK) [ 29.413] drmOpenByBusid: drmOpenMinor returns 10 [ 29.413] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 [ 29.413] (II) [drm] DRM interface version 1.4 [ 29.413] (II) [drm] DRM open master succeeded. [ 29.413] (--) NOUVEAU(0): Chipset: "NVIDIA NV92" [ 29.413] (II) NOUVEAU(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 29.413] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32 [ 29.413] (==) NOUVEAU(0): RGB weight 888 [ 29.413] (==) NOUVEAU(0): Default visual is TrueColor [ 29.413] (==) NOUVEAU(0): Using HW cursor [ 29.413] (==) NOUVEAU(0): GLX sync to VBlank disabled. [ 29.413] (==) NOUVEAU(0): Page flipping enabled [ 29.553] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section [ 29.658] (II) NOUVEAU(0): Output DVI-I-2 has no monitor section [ 29.764] (II) NOUVEAU(0): EDID for output DVI-I-1 [ 29.764] (II) NOUVEAU(0): Manufacturer: DEL Model: a009 Serial#: 809775436 [ 29.764] (II) NOUVEAU(0): Year: 2003 Week: 51 [ 29.764] (II) NOUVEAU(0): EDID Version: 1.3 [ 29.764] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V [ 29.764] (II) NOUVEAU(0): Sync: Separate [ 29.764] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 30 vert.: 23 [ 29.764] (II) NOUVEAU(0): Gamma: 2.20 [ 29.764] (II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display [ 29.764] (II) NOUVEAU(0): Default color space is primary color space [ 29.764] (II) NOUVEAU(0): First detailed timing is preferred mode [ 29.764] (II) NOUVEAU(0): redX: 0.631 redY: 0.347 greenX: 0.309 greenY: 0.582 [ 29.764] (II) NOUVEAU(0): blueX: 0.148 blueY: 0.112 whiteX: 0.312 whiteY: 0.328 [ 29.764] (II) NOUVEAU(0): Supported established timings: [ 29.764] (II) NOUVEAU(0): 720x400@70Hz [ 29.764] (II) NOUVEAU(0): 640x480@60Hz [ 29.764] (II) NOUVEAU(0): 640x480@72Hz [ 29.764] (II) NOUVEAU(0): 640x480@75Hz [ 29.764] (II) NOUVEAU(0): 800x600@56Hz [ 29.764] (II) NOUVEAU(0): 800x600@60Hz [ 29.764] (II) NOUVEAU(0): 800x600@72Hz [ 29.764] (II) NOUVEAU(0): 800x600@75Hz [ 29.764] (II) NOUVEAU(0): 1024x768@60Hz [ 29.764] (II) NOUVEAU(0): 1024x768@70Hz [ 29.764] (II) NOUVEAU(0): 1024x768@75Hz [ 29.764] (II) NOUVEAU(0): Manufacturer's mask: 0 [ 29.764] (II) NOUVEAU(0): Supported detailed timing: [ 29.764] (II) NOUVEAU(0): clock: 65.0 MHz Image Size: 304 x 228 mm [ 29.764] (II) NOUVEAU(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0 [ 29.764] (II) NOUVEAU(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0 [ 29.764] (II) NOUVEAU(0): Serial No: M16183CI0D1LC [ 29.764] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 63 kHz, PixClock max 85 MHz [ 29.764] (II) NOUVEAU(0): Monitor name: DELL E152FP [ 29.764] (II) NOUVEAU(0): EDID (in hex): [ 29.764] (II) NOUVEAU(0): 00ffffffffffff0010ac09a04c314430 [ 29.764] (II) NOUVEAU(0): 330d0103681e17782eb030a1584f9526 [ 29.764] (II) NOUVEAU(0): 1c5054afce0001010101010101010101 [ 29.764] (II) NOUVEAU(0): 01010101010164190040410026301888 [ 29.764] (II) NOUVEAU(0): 360030e410000018000000ff004d3136 [ 29.764] (II) NOUVEAU(0): 31383343493044314c43000000fd0038 [ 29.764] (II) NOUVEAU(0): 4c1e3f08000a202020202020000000fc [ 29.764] (II) NOUVEAU(0): 0044454c4c204531353246500a2000fa [ 29.764] (II) NOUVEAU(0): EDID vendor "DEL", prod id 40969 [ 29.764] (II) NOUVEAU(0): Using EDID range info for horizontal sync [ 29.764] (II) NOUVEAU(0): Using EDID range info for vertical refresh [ 29.764] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 29.764] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 29.764] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 29.764] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 29.764] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) [ 29.764] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) [ 29.764] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 29.764] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 29.764] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) [ 29.764] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) [ 29.764] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) [ 29.764] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) [ 29.764] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1 [ 29.764] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 29.764] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) [ 29.764] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) [ 29.764] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) [ 29.764] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) [ 29.764] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 29.764] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 29.764] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz) [ 29.764] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) [ 29.764] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 29.764] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 29.869] (II) NOUVEAU(0): EDID for output DVI-I-2 [ 29.869] (II) NOUVEAU(0): Output DVI-I-1 connected [ 29.869] (II) NOUVEAU(0): Output DVI-I-2 disconnected [ 29.869] (II) NOUVEAU(0): Using exact sizes for initial modes [ 29.869] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1024x768 [ 29.869] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 29.869] (--) NOUVEAU(0): Virtual size is 1024x768 (pitch 0) [ 29.869] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz [ 29.869] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 29.869] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz [ 29.869] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) [ 29.869] (**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz [ 29.869] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) [ 29.869] (**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz [ 29.869] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) [ 29.869] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz [ 29.869] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) [ 29.869] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz [ 29.869] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 29.869] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz [ 29.869] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 29.869] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz [ 29.869] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz) [ 29.869] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz [ 29.869] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) [ 29.869] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz [ 29.869] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 29.869] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz [ 29.869] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 29.869] (**) NOUVEAU(0): Display dimensions: (300, 230) mm [ 29.869] (**) NOUVEAU(0): DPI set to (86, 84) [ 29.869] (II) Loading sub module "fb" [ 29.869] (II) LoadModule: "fb" [ 29.869] (II) Loading /usr/lib64/xorg/modules/libfb.so [ 29.869] (II) Module fb: vendor="X.Org Foundation" [ 29.869] compiled for 1.10.4, module version = 1.0.0 [ 29.869] ABI class: X.Org ANSI C Emulation, version 0.4 [ 29.869] (II) Loading sub module "exa" [ 29.869] (II) LoadModule: "exa" [ 29.870] (II) Loading /usr/lib64/xorg/modules/libexa.so [ 29.870] (II) Module exa: vendor="X.Org Foundation" [ 29.870] compiled for 1.10.4, module version = 2.5.0 [ 29.870] ABI class: X.Org Video Driver, version 10.0 [ 29.870] (II) Loading sub module "shadowfb" [ 29.870] (II) LoadModule: "shadowfb" [ 29.870] (II) Loading /usr/lib64/xorg/modules/libshadowfb.so [ 29.870] (II) Module shadowfb: vendor="X.Org Foundation" [ 29.870] compiled for 1.10.4, module version = 1.0.0 [ 29.870] ABI class: X.Org ANSI C Emulation, version 0.4 [ 29.870] (II) UnloadModule: "nv" [ 29.870] (II) Unloading nv [ 29.870] (II) UnloadModule: "fbdev" [ 29.870] (II) Unloading fbdev [ 29.870] (II) UnloadModule: "fbdevhw" [ 29.870] (II) Unloading fbdevhw [ 29.870] (II) UnloadModule: "vesa" [ 29.870] (II) Unloading vesa [ 29.870] (--) Depth 24 pixmap format is 32 bpp [ 29.886] (II) NOUVEAU(0): Opened GPU channel 2 [ 29.886] (II) NOUVEAU(0): [DRI2] Setup complete [ 29.886] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau [ 29.889] (II) NOUVEAU(0): GART: 512MiB available [ 29.893] (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer [ 29.893] (II) EXA(0): Driver allocated offscreen pixmaps [ 29.893] (II) EXA(0): Driver registered support for the following operations: [ 29.893] (II) Solid [ 29.893] (II) Copy [ 29.893] (II) Composite (RENDER acceleration) [ 29.893] (II) UploadToScreen [ 29.893] (II) DownloadFromScreen [ 29.893] (==) NOUVEAU(0): Backing store disabled [ 29.893] (==) NOUVEAU(0): Silken mouse enabled [ 29.893] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video. [ 29.893] (II) NOUVEAU(0): [XvMC] Extension initialized. [ 29.893] (==) NOUVEAU(0): DPMS enabled [ 29.893] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 29.893] (--) RandR disabled [ 29.893] (II) Initializing built-in extension Generic Event Extension [ 29.893] (II) Initializing built-in extension SHAPE [ 29.893] (II) Initializing built-in extension MIT-SHM [ 29.893] (II) Initializing built-in extension XInputExtension [ 29.893] (II) Initializing built-in extension XTEST [ 29.893] (II) Initializing built-in extension BIG-REQUESTS [ 29.893] (II) Initializing built-in extension SYNC [ 29.893] (II) Initializing built-in extension XKEYBOARD [ 29.893] (II) Initializing built-in extension XC-MISC [ 29.893] (II) Initializing built-in extension SECURITY [ 29.893] (II) Initializing built-in extension XINERAMA [ 29.893] (II) Initializing built-in extension XFIXES [ 29.893] (II) Initializing built-in extension RENDER [ 29.893] (II) Initializing built-in extension RANDR [ 29.893] (II) Initializing built-in extension COMPOSITE [ 29.893] (II) Initializing built-in extension DAMAGE [ 30.155] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 30.155] (II) AIGLX: enabled GLX_INTEL_swap_event [ 30.155] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 30.155] (II) AIGLX: enabled GLX_SGI_make_current_read [ 30.155] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 30.156] (II) AIGLX: Loaded and initialized /usr/lib64/dri/nouveau_dri.so [ 30.156] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 30.157] (II) NOUVEAU(0): NVEnterVT is called. [ 30.162] (II) NOUVEAU(0): Setting screen physical size to 270 x 203 [ 30.162] resize called 1024 768 [ 30.210] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 30.210] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 30.210] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 30.210] (**) Power Button: Applying InputClass "LocalKeyboard" [ 30.210] (II) LoadModule: "evdev" [ 30.210] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 30.210] (II) Module evdev: vendor="X.Org Foundation" [ 30.210] compiled for 1.10.4, module version = 2.6.0 [ 30.210] Module class: X.Org XInput Driver [ 30.210] ABI class: X.Org XInput driver, version 12.2 [ 30.210] (II) Using input driver 'evdev' for 'Power Button' [ 30.210] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 30.210] (**) Power Button: always reports core events [ 30.210] (**) Power Button: Device: "/dev/input/event3" [ 30.210] (--) Power Button: Found keys [ 30.210] (II) Power Button: Configuring as keyboard [ 30.211] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3" [ 30.217] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 30.217] (**) Option "xkb_rules" "evdev" [ 30.217] (**) Option "xkb_model" "evdev" [ 30.217] (**) Option "xkb_layout" "us" [ 30.234] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 30.234] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 30.234] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 30.234] (**) Power Button: Applying InputClass "LocalKeyboard" [ 30.234] (II) Using input driver 'evdev' for 'Power Button' [ 30.234] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 30.234] (**) Power Button: always reports core events [ 30.234] (**) Power Button: Device: "/dev/input/event2" [ 30.234] (--) Power Button: Found keys [ 30.234] (II) Power Button: Configuring as keyboard [ 30.234] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2" [ 30.234] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 30.234] (**) Option "xkb_rules" "evdev" [ 30.234] (**) Option "xkb_model" "evdev" [ 30.234] (**) Option "xkb_layout" "us" [ 30.236] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1) [ 30.236] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 30.236] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 30.236] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse' [ 30.236] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 30.236] (**) Logitech USB Optical Mouse: always reports core events [ 30.236] (**) Logitech USB Optical Mouse: Device: "/dev/input/event1" [ 30.236] (--) Logitech USB Optical Mouse: Found 12 mouse buttons [ 30.236] (--) Logitech USB Optical Mouse: Found scroll wheel(s) [ 30.236] (--) Logitech USB Optical Mouse: Found relative axes [ 30.236] (--) Logitech USB Optical Mouse: Found x and y relative axes [ 30.236] (II) Logitech USB Optical Mouse: Configuring as mouse [ 30.236] (II) Logitech USB Optical Mouse: Adding scrollwheel support [ 30.236] (**) Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 30.236] (**) Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 30.236] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input1/event1" [ 30.236] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE) [ 30.236] (II) Logitech USB Optical Mouse: initialized for relative axes. [ 30.236] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 30.236] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0 [ 30.236] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000 [ 30.236] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4 [ 30.236] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0) [ 30.236] (II) No input driver/identifier specified (ignoring) [ 30.240] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 30.240] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 30.240] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 30.240] (**) AT Translated Set 2 keyboard: Applying InputClass "LocalKeyboard" [ 30.240] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 30.240] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 30.240] (**) AT Translated Set 2 keyboard: always reports core events [ 30.240] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 30.240] (--) AT Translated Set 2 keyboard: Found keys [ 30.240] (II) AT Translated Set 2 keyboard: Configuring as keyboard [ 30.240] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 30.240] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) [ 30.240] (**) Option "xkb_rules" "evdev" [ 30.240] (**) Option "xkb_model" "evdev" [ 30.240] (**) Option "xkb_layout" "us" [ 30.240] (II) config/udev: Adding input device PC Speaker (/dev/input/event4) [ 30.240] (II) No input driver/identifier specified (ignoring) [ 36.534] (II) NOUVEAU(0): EDID vendor "DEL", prod id 40969 [ 36.534] (II) NOUVEAU(0): Using hsync ranges from config file [ 36.534] (II) NOUVEAU(0): Using vrefresh ranges from config file [ 36.534] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 36.534] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 36.534] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 36.534] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 36.534] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) [ 36.534] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) [ 36.534] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 36.534] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 36.534] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) [ 36.534] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) [ 36.534] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) [ 36.534] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) [ 54.201] (II) NOUVEAU(0): EDID vendor "DEL", prod id 40969 [ 54.202] (II) NOUVEAU(0): Using hsync ranges from config file [ 54.202] (II) NOUVEAU(0): Using vrefresh ranges from config file [ 54.202] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 54.202] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 54.202] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 54.202] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 54.202] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) [ 54.202] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) [ 54.202] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 54.202] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 54.202] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) [ 54.202] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) [ 54.202] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) [ 54.202] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 2

[opensuse] How can I enable special X11 key bindings?
by Bjoern Voigt 09 Feb '12

09 Feb '12

For developing and debugging purposes I'd like to enable some special keyboard options. Especially I need "UnGrab" (Ungrab cancels server/keyboard/pointer grabs) option. This option is bind to CTRL-Alt-KP_Divide (keypad device key) in /usr/share/X11/xkb/compat/xfree86 /usr/share/X11/xkb/symbols/ir /usr/share/X11/xkb/symbols/keypad /usr/share/X11/xkb/symbols/srvr_ctrl Does anyone know, how I can enable this key binding? Currently the bindings seems to be deactivated. Thanks, Björn -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 4

[opensuse] Not specifically OT - gedit qn
by John Bennett 09 Feb '12

09 Feb '12

Whenever I open gedit, it opens an empty file: ie if I open it by itself, I get 1 open file (*Unsaved Document 1), but also if I open a specific existing file, when I open it, I also get an additional extra empty file. This is not the most annoying part, because when you go to exit gedit, it will prompt you to save (or otherwise) all your empty/open files... Have searched for this, and the only sort-of fix I have found is to run it with a script... Surely there is something a bit simpler? I would have thought an option in preferences, but apparently not. Thanks, John. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3

[opensuse] download.nvidia.org repo ftp is down. Where to find mirrors?
by Matthias Danzl 09 Feb '12

09 Feb '12

The central download server for proprietary Nvidia graphic device drivers ftp://download.nvidia.com/opensuse/ seems to be down. It has also been reported down by a collegue a few days ago. Anyone know something about this? Are there any mirrors available? Where? TIA -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 2

[opensuse] Epson v330 scanner
by Stan Goodman 09 Feb '12

09 Feb '12

In searching for a new scanner to replace my old one that is now defunct, I have become interested in the Epson V330. This scanner is unsupported by XSane, but Epson has a driver for it. It also has a GUI for this driver, but this GUI is said to support only black and white scanning. My question is if I install this driver, will XSane be able to see it and make use of it? I would be grateful for comments and advice, especially from anyone who has tried this.with an Epson scanner. -- Stan Goodman Qiryat Tiv'on Israel -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 15

[opensuse] Re: Problems with PDF - Seamonkey & Firefox
by jdd-gmane 09 Feb '12

09 Feb '12

Le 08/02/2012 11:54, Basil Chupin a écrit : > On 08/02/12 21:31, jdd-gmane wrote: >> Le 08/02/2012 10:55, Basil Chupin a �crit : >> >>> Excuse moi for asking, but which version of oS are you running because >>> 12.1 (?and earlier) uses Okular for pdf files? And I don't have >>> problems with Okular. >> >> it's only the firefox plugin for aroread that have problem. > > Before I wrote above, I went looking for this plugin and it certainly > is not something which Mozilla has as either an extension or a plugin. > So it has to be something which comes with openSUSE and, in fact, > there is an acroread rpm listed in Software Manager. And there is a > proviso against it as I quoted in my earlier response. > > BC > there *is* an acrobat plugin (I didn't think of it and just desactivated it), and it's installed also when installing acroread from adobe sources. I need acrobat reader because ocular don't print well any pdf jdd -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 9

[opensuse] Nepomuk stub x6
by Mark Misulich 09 Feb '12

09 Feb '12

Hi, when I boot up my desktop computer with opensuse 12.1 and KDE 4.8.0 (4.8.0 "release 2", I always get a message saying Nepomuk stub has crashed. If I try to restart the application, or just close the message, I have to restart/close it 6 times before the message goes away for good. It doesn't seem to be a time dependant thing, like I am need to wait an equivalent time required to close the application 6 times and then just close it once. I have to close it six times, then the notification goes away and the computer works like normal. I tried to google to see if there was anything about this, but I didn't find anything pertinent. Anyone have any ideas? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Vanilla kernel in repository
by Jeffrey L. Taylor 09 Feb '12

09 Feb '12

To deal with my Intel Sandybridge hardware, I am trying the vanilla kernels. The latest one appears to be misconfigured in the repository. # zypper install kernel-vanilla Loading repository data... Reading installed packages... Resolving package dependencies... The following NEW package is going to be installed: kernel-vanilla 1 new package to install. Overall download size: 41.1 MiB. After the operation, additional 138.6 MiB will be used. Continue? [y/n/?] (y): Retrieving package kernel-vanilla-3.2.0.9429.g90a4c0f-1.1.x86_64 (1/1), 41.1 MiB (138.6 MiB unpacked) Retrieving: kernel-vanilla-3.2.0.9429.g90a4c0f-1.1.x86_64.rpm [error] File './x86_64/kernel-vanilla-3.2.0.9429.g90a4c0f-1.1.x86_64.rpm' not found on medium 'http://download.opensuse.org/repositories/Kernel:/vanilla/standard' Suggestions on who to contact or how to fix it on my end. I've tried installing several days apart and all attempts failed, so it doesn't look like a change propagation problem. TIA, Jeffrey -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3

[opensuse] What's the story with ExFAT?
by Greg Freemyer 09 Feb '12

09 Feb '12

I needed to have a external drive that I could easily move from Win7, Mac OS 10.7, and openSUSE. I preferred it not to have the 2GB limit that vfat has. I know ExFAT is supported on the Mac and on Win7, so I went with it. To my surprise, both the Mac and Win7 have no issue, but at least a vanilla opensuse 12.1 won't mount it! Is there something I can install, or hax linux fallen behind in this area? Thanks Greg -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 18

[opensuse] Which kernel
by Bob S 09 Feb '12

09 Feb '12

Hello SuSE people. Running 1`2.1 with KDE3 Last night I did a zypper 'up' zypper downloaded TWO kernels. kernel-default and kernel-desktop. Now I;m havinf trouble with my nvidia drivers. I guess it's confused. So which is the correct one for 12.1 ? Bob S -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 34

[opensuse] How let users change their Samba password?
by Andreas 08 Feb '12

08 Feb '12

Hi, I installed 12.1 and let a user login by ssh. Now he should be able to change his password for Samba with smbpasswd. smbpasswd asks for the old and 2 times for a new pw and then comlaines that there cant be a server reached on 127.0.0.1 which is more or less expected since Samba's interface is eth0. With root the command "smbpasswd someusername" works as expected, though. The docu states that the loop-back 127.0.0.1 shouldn't be entered in the interface list. So how is it planned to let users change their pw without giving them root access? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] Different TERM for ssh and xterm?
by Andreas 08 Feb '12

08 Feb '12

Hi, can I have a different TERM setting for ssh and xterm? For ssh (putty) I need TERM = linux to have all the linedraw signes and F-keys working right. In local xterms I need TERM = xterm. Is there a way to fix this without changing TERM manually everytime I log in or open a xterm? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 4

[opensuse] strange web server result
by jdd-gmane 08 Feb '12

08 Feb '12

Hello, Trying to install sphpblog on my own server (11.4, 64 bits) I have problem I never had before with the many php application I have on this server. I asked on the spphpblog forum with with no answer yet and I don't find any info on the doc I have to problems: * sometime get doubled folder url in the url window of firefox: http://www.dodin.org/blog/blog/index.php notice the two "blog" parts, of course only one should be when I fix it manually (removing the extra "blog"), it works: http://www.dodin.org/blog//index.php works (display the page). logout works but give this: http://www.dodin.org/blog//index.php (notice the two //) * I also some time get http://www.dodin.orgblog/index.php no / between org and blog and of course this gives nonexistent page do you see any permission problem or apache 2 config problem that could give this (no error in the logs) exdactly I get: Firefox ne peut trouver le serveur à l'adresse www.dodin.orgblog2 with www.dodin.org/blog2 in the url window no such problem with http://www.dodin.org/temp/index.php that displays "test" thanks jdd -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Cautionary tale re encrypted HOME directory
by Basil Chupin 08 Feb '12

08 Feb '12

When I installed 12.1 I encrypted (for the first time) my HOME directory. Last night, in anticipation of installing KDE 4.8, I did a backup of my /home to an external HDD. Then the thought occurred to me - which is as a result of a court case in USA where the judge ruled that the Fifth Amendment did not apply where the woman refused to divulge the passphrase to her encrypted system and she had to type in the passphrase to make the contents of the HDD available to the DoJ - is my encrypted data now readable on the external HDD? The answer is YES. I attached the external to another computer and am able to read all the files in that backup. FYI. BC -- The wise man does at once what a fool does finally. Niccolo Machiavelli -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

15 35

[opensuse] Now cannot print
by Basil Chupin 08 Feb '12

08 Feb '12

Anybody else having the same problem or has heard of this happening? I just installed KDE4.8 to replace v4.7. I use Dolphin and it uses Kwrite to write/edit text files. I also have an HP 8450 Photosmart printer which happily printed anything in Kwrite - until now. The printer will print a perfect test print (using Yast) but just sits there like a stunned mullet when I go to print a Kwrite document - AND the HPLIP Service Status (sitting on my taskbar) shows that the darn thing has successfully printed the Kwrite file! Anybody throw some light on this sudden and unexpected behaviour by my HP printer, thanks? BC -- A three-year-old boy was examining his testicles while taking a bath. "Mum" he asked, "are these my brains?" "Not yet," she replied. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 13

[opensuse] network configuration in post scripts?
by Razvan Cosma 08 Feb '12

08 Feb '12

Hello everyone, In version 11 (both opensuse and sles) I was configuring various system parameters in the <chroot-scripts> section, which had the filesystem mounted and network (dhcp) up. In 12 though, my changes (ifcfg, hostname, routes, udev) are overwritten by the last autoyast step after reboot. I've also tried post-scripts and init-scripts, same problem. A working setup in 11 is: <networking><interfaces config:type="list"><interface><bootproto>dhcp4</bootproto><device>eth0</device><startmode>auto</startmode></interface></interfaces></networking> this ensures network is up on the first interface, the post script is supposed to configure the others <packages config:type="list"><package>dialog</package><package>wget</package> <chroot-scripts config:type="list"><script><chrooted config:type="boolean">true</chrooted><source><![CDATA[ sysid=$(dialog --no-cancel --stdout --backtitle "Post-install configuration" --inputbox "Enter system id:" 8 30 localhost) read iname mac ip gw hname <<<$(IFS=" "; wget -q -O - "http://server?$sysid") echo $hname > /etc/HOSTNAME sed -i -e "s/$$mac.*NAME=\"$.*/\1$iname\"/" /etc/udev/rules.d/70-persistent-net.rules echo -e "BOOTPROTO='static'\nSTARTMODE='onboot'\nIPADDR='$ip'\n" > /etc/sysconfig/network/ifcfg-$iname #other various system settings ]]></source></script></chroot-scripts> This ensured that udev always assigns a specific IP to the correct interface, data is in some SQL. The files are zeroed in 12, though, any hints on what has changed? Thank you, Razvan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Re: Which kernel
by Joachim Schrod 08 Feb '12

08 Feb '12

Brian K. White wrote: > On 2/6/2012 8:53 AM, Joachim Schrod wrote: >> Felix Miata wrote: >>> On 2012/02/06 06:01 (GMT+0100) Anders Johansson composed: >>> >>>> On Sunday 05 February 2012 18:57:57 Felix Miata wrote: >>> >>>>> ...proprietary NVidia already installed; accordingly, xorg.conf >>>>> was >>>>> created consistent with NVidia custom high DPI operation... >>> >>>> kernel-desktop is a good choice for a desktop machine. >>> >>> It used to be it was clear that was the case. Or maybe it was >>> recently changed so that is now the case. I can't remember which, >>> but I do remember there was a change discussed either here and/or >>> on the factory list. >> >> Executive Summary for Bob: >> -- Keep kernel-desktop and delete kernel-default. >> -- If you don't do so already, use the NVidia kmp packages >> from the community repository. >> >> For Felix: Maybe you mean this discussion: >> >> A few months ago, it was mentioned here that kernel-desktop is now >> the "new default" and should be used in most circumstances. >> kernel-default is primarly supplied for old hardware that doesn't >> have PAE capabilities. >> >> That the name "kernel-default" stuck for the non-default kernel and >> that the two names were not switched was then attested as >> unfortunate. It is something that the devs contemplated to change >> for enhanced clarity, but then decided that it was too much hassle >> for the gain. AFAIR, there were too many problems with dependencies >> or something like that. >> >> HTH, >> Joachim >> >> PS: Ignore BC, put him in a kill-file. It's better for your health. >> > > I don't really think kernel-default is for old hardware. I run it > exclusively*, on brand new hardware, because I run servers that I > need optimized for throughput instead of for latency, Brian, please, take notion of the context of this thread. Please, try to imagine what the OP wanted and how we can help to achieve that. Pay attention to the posting history of the involved persons, if possible. If you start to contemplate differentiating kernels according to their optimization for throughput aganist their latency, you're in the 0.05 promille percentile who knows how to choose their kernels in specific ways. The other 99.9995% (rounded, of course) wants to have less hassle and don't want to care about these fine differences. And that's especially valid for Bob who should be well known to you as a person with eye-sight disabilities. I know both Bob and you from postings to this list, so, you will have realized Bob's context by yourself, too, surely, don't you? Concerning your contribution to this thread, I doubt that the difference between stock kernel-desktop and stock kernel-default gains a lot. If you're really down to this fine-grained differences, you need to analyze your workload and configure the kernel's scheduler and IO subsystems accordingly; individually, as your measurements will point out. Just choosing a kernel is cargo-cult sysadmin work and not professional. It lacks data from profiling and past change/problem/incident management, which you, as a professional sysadmin, surely took before engaging in your kernel configuratiuon selection; like we do at our customer's sites. But this is way beyond the discussion of this thread here. >From your posting history I judge that you and I are in the same situation as having to plan data center rollouts for large amounts of systems where such individual performance analysis brings large gains. But we should never forget that usage of Linux on the desktop has not quite the same amount of need for optimization. It runs good there as it is. Let's stop to tell the problems of kernel selections when you have 100,000 systems to roll out; for almost all basic installations it just works. So, I would risk the notion of telling you: In the context of Bob's situtiation and his original question, your telling of kernel-choosing according to selection of throughput vs. latency is not helpful, not at all. Sorry, but that's my NSHO. Best, Joachim (Sorry that I'm not able to express this better at 3am, but I'm not a native English speaker. Reading it through, it's not as differentiated as I'd have liked it to be. But having a mother-in-law with only 45% sight on one eye and 5% sight on the other, I can sympathize with Bob and therefore contribute here more privately than I'd usually do.) -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Joachim Schrod Email: jschrod(a)acm.org Roedermark, Germany -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Configuring Kmail accounts in KDE 4.7
by Stan Goodman 07 Feb '12

07 Feb '12

I have recently installed OS 12.1 in a clean partition. in configuring Accounts in Kmail, I have copied the settings from my OS 11.4 installation, which works successfully. The result is that the POP account receives incoming messages as it should, except that the Password field is greyed out, so that I have to enter the receiving server's password manually at the beginning of each session (i.e., once in the morning). I cannot account for this, and would be grateful for any clue about why the Password field is not available to me. The SMTP account does not work, and I am unable to send messages through Kmail, Thunderbird works, and both were configured by copying from the v11.4 installation. An attempt to access the SMTP server yields an error message which contains the following: "...The server responded "sorry, your envelope sender domain must exist (#57.1)" I do not know what is meant by "envelope sender domain", as this terminology doesn't appear in any documentation that I have found. I would be grateful for any comment on what this message is trying to tell me, and what needs to be done to make it right. -- Stan Goodman Qiryat Tiv'on Israel -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] How to update PHP to 5.3.10?
by Andreas 07 Feb '12

07 Feb '12

Hi, I installed Opensuse 12.1 with PHP and added Suse's PHP repository. Currently PHP is version 5.3.8. Yesterday I searched for php-mbstring and clicked install. The installer refused because mbstring were version 5.3.10 and thus incompatible with my 5.3.8. Then I searched for php5 and yast found everything on v 5.3.8 even mbstring. Is there a special trick to let yast upgrade php? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3

[opensuse] Installing driver for AMD Radeon HD 6470M
by Gaurav Sood 07 Feb '12

07 Feb '12

hi, i have installed openSUSE 12.1. am looking for a working way to install the proprietary driver for AMD Radeon HD 6470m. currently, its working on intel sandybridge mobile graphics. it causes intense heating. all methods to install the driver so far have resulted in loss of GUI and have made me to remove the driver. for other distros like ubuntu, it made me reinstall the OS itself. till date, all methods i found on the net have failed. awaiting help Gaurav Sood -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] I/O-controller (Netmos) doesn't work after Update to opensuse 12.1
by Paul Neuwirth 07 Feb '12

07 Feb '12

Hallo list, it seems really strange. I was glad upgrade from opensuse 11.3 to 12.1 worked fine. But after a reboot (without kernel change) my I/O card (1 parallel, 2 serial ports, NetMos) did not work anymore. Urgently needed for dialin and fax. It always worked with 2.6 kernels provided by openSuse dmesg: [ 25.476126] parport_pc 0000:06:04.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 25.476183] PCI parallel port detected: 1415:9513, I/O at 0xd800(0x0), IRQ 16 [ 25.476244] parport0: PC-style at 0xd800, irq 16 [PCSPP] [ 25.555792] parport0: Printer, Lexmark International Lexmark Optra E+ LaserPrinter [ 25.829251] parport_serial 0000:04:07.0: enabling device (9714 -> 9715) [ 25.829307] 0000:04:07.0: unknown NetMos/Mostech device [ 25.829307] Please send the output of lspci -vv, this [ 25.829308] message (0x9710,0x9835,0x0004,0x0000), the [ 25.829309] manufacturer and name of serial board or [ 25.829309] modem board to rmk+serial(a)arm.linux.org.uk. [ 25.863389] ppdev: user-space parallel port driver lspci -vv 04:07.0 Communication controller: NetMos Technology PCI 9835 Multi-I/O Controller (rev 01) Subsystem: Device 0004:0000 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B+ DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort+ <MAbort- >SERR- <PERR+ INTx- Latency: 0, Cache Line Size: 20 bytes Region 0: I/O ports at 6480 [disabled] [size=8] Region 1: I/O ports at 5000 [disabled] [size=4] Region 2: I/O ports at 6084 [disabled] [size=4] Region 3: I/O ports at 5004 [disabled] [size=4] Region 4: I/O ports at 5c04 [disabled] [size=4] Region 5: I/O ports at 5008 [disabled] [size=4] Capabilities: [04] #14 [9835] Capabilities: [94] Slot ID: 0 slots, First-, chassis 00 04:07.1 Communication controller: Device 9714:9835 (rev 01) Subsystem: Device 0004:0000 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B+ DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort+ <MAbort- >SERR- <PERR+ INTx- Latency: 0, Cache Line Size: 20 bytes Region 0: I/O ports at 500c [disabled] [size=4] Region 1: I/O ports at 5010 [disabled] [size=4] Region 2: I/O ports at 5014 [disabled] [size=4] Region 3: I/O ports at 5018 [disabled] [size=4] Region 4: I/O ports at 501c [disabled] [size=4] Region 5: I/O ports at 5020 [disabled] [size=4] Capabilities: [04] #14 [9835] Capabilities: [94] Slot ID: 0 slots, First-, chassis 00 04:07.2 Communication controller: Device 9714:9835 (rev 01) Subsystem: Device 0004:0000 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B+ DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort+ <MAbort- >SERR- <PERR+ INTx- Latency: 0, Cache Line Size: 20 bytes Region 0: I/O ports at 5024 [disabled] [size=4] Region 1: I/O ports at 5028 [disabled] [size=4] Region 2: I/O ports at 502c [disabled] [size=4] Region 3: I/O ports at 5030 [disabled] [size=4] Region 4: I/O ports at 5034 [disabled] [size=4] Region 5: I/O ports at 5038 [disabled] [size=4] Capabilities: [04] #14 [9835] Capabilities: [94] Slot ID: 0 slots, First-, chassis 00 04:07.3 Communication controller: Device 9714:9835 (rev 01) Subsystem: Device 0004:0000 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B+ DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort+ <MAbort- >SERR- <PERR+ INTx- Latency: 0, Cache Line Size: 20 bytes Region 0: I/O ports at 503c [disabled] [size=4] Region 1: I/O ports at 5040 [disabled] [size=4] Region 2: I/O ports at 5044 [disabled] [size=4] Region 3: I/O ports at 5048 [disabled] [size=4] Region 4: I/O ports at 504c [disabled] [size=4] Region 5: I/O ports at 5050 [disabled] [size=4] Capabilities: [04] #14 [9835] Capabilities: [94] Slot ID: 0 slots, First-, chassis 00 04:07.4 Communication controller: Device 9714:9835 (rev 01) Subsystem: Device 0004:0000 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B+ DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort+ <MAbort- >SERR- <PERR+ INTx- Latency: 0, Cache Line Size: 20 bytes Region 0: I/O ports at 5054 [disabled] [size=4] Region 1: I/O ports at 5058 [disabled] [size=4] Region 2: I/O ports at 505c [disabled] [size=4] Region 3: I/O ports at 5060 [disabled] [size=4] Region 4: I/O ports at 5064 [disabled] [size=4] Region 5: I/O ports at 5068 [disabled] [size=4] Capabilities: [04] #14 [9835] Capabilities: [94] Slot ID: 0 slots, First-, chassis 00 04:07.5 Communication controller: Device 9714:9835 (rev 01) Subsystem: Device 0004:0000 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B+ DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort+ <MAbort- >SERR- <PERR+ INTx- Latency: 0, Cache Line Size: 20 bytes Region 0: I/O ports at 506c [disabled] [size=4] Region 1: I/O ports at 5070 [disabled] [size=4] Region 2: I/O ports at 5074 [disabled] [size=4] Region 3: I/O ports at 5078 [disabled] [size=4] Region 4: I/O ports at 507c [disabled] [size=4] Region 5: I/O ports at 5080 [disabled] [size=4] Capabilities: [04] #14 [9835] Capabilities: [94] Slot ID: 0 slots, First-, chassis 00 04:07.6 Communication controller: Device 9714:9835 (rev 01) Subsystem: Device 0004:0000 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B+ DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort+ <MAbort- >SERR- <PERR+ INTx- Latency: 0, Cache Line Size: 20 bytes Region 0: I/O ports at 5084 [disabled] [size=4] Region 1: I/O ports at 5088 [disabled] [size=4] Region 2: I/O ports at 508c [disabled] [size=4] Region 3: I/O ports at 5090 [disabled] [size=4] Region 4: I/O ports at 5094 [disabled] [size=4] Region 5: I/O ports at 5098 [disabled] [size=4] Capabilities: [04] #14 [9835] Capabilities: [94] Slot ID: 0 slots, First-, chassis 00 04:07.7 Communication controller: Device 9714:9835 (rev 01) Subsystem: Device 0004:0000 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B+ DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort+ <MAbort- >SERR- <PERR+ INTx- Latency: 0, Cache Line Size: 20 bytes Region 0: I/O ports at 509c [disabled] [size=4] Region 1: I/O ports at 50a0 [disabled] [size=4] Region 2: I/O ports at 50a4 [disabled] [size=4] Region 3: I/O ports at 50a8 [disabled] [size=4] Region 4: I/O ports at 50ac [disabled] [size=4] Region 5: I/O ports at 50b0 [disabled] [size=4] Capabilities: [04] #14 [9835] Capabilities: [94] Slot ID: 0 slots, First-, chassis 00 I just found this on the head of dmesg: [ 0.554302] pci 0000:04:07.0: BAR 1: assigned [io 0x5000-0x5003] [ 0.554341] pci 0000:04:07.0: BAR 1: error updating (0x005001 != 0x005005) [ 0.554379] pci 0000:04:07.0: BAR 1: set to [io 0x5000-0x5003] (PCI address [0x5000-0x5003]) [ 0.554430] pci 0000:04:07.0: BAR 3: assigned [io 0x5004-0x5007] [ 0.554469] pci 0000:04:07.0: BAR 3: set to [io 0x5004-0x5007] (PCI address [0x5004-0x5007]) [ 0.554519] pci 0000:04:07.0: BAR 5: assigned [io 0x5008-0x500b] [ 0.554559] pci 0000:04:07.0: BAR 5: error updating (0x005009 != 0x00500d) [ 0.554598] pci 0000:04:07.0: BAR 5: set to [io 0x5008-0x500b] (PCI address [0x5008-0x500b]) [ 0.554647] pci 0000:04:07.1: BAR 0: assigned [io 0x500c-0x500f] [ 0.554687] pci 0000:04:07.1: BAR 0: error updating (0x00500d != 0x005009) [ 0.554725] pci 0000:04:07.1: BAR 0: set to [io 0x500c-0x500f] (PCI address [0x500c-0x500f]) [ 0.554775] pci 0000:04:07.1: BAR 1: assigned [io 0x5010-0x5013] [ 0.554815] pci 0000:04:07.1: BAR 1: error updating (0x005011 != 0x005015) [ 0.554853] pci 0000:04:07.1: BAR 1: set to [io 0x5010-0x5013] (PCI address [0x5010-0x5013]) [ 0.554903] pci 0000:04:07.1: BAR 2: assigned [io 0x5014-0x5017] [ 0.554943] pci 0000:04:07.1: BAR 2: error updating (0x005015 != 0x005011) [ 0.554981] pci 0000:04:07.1: BAR 2: set to [io 0x5014-0x5017] (PCI address [0x5014-0x5017]) [ 0.555037] pci 0000:04:07.1: BAR 3: assigned [io 0x5018-0x501b] [ 0.555076] pci 0000:04:07.1: BAR 3: error updating (0x005019 != 0x00501d) [ 0.555115] pci 0000:04:07.1: BAR 3: set to [io 0x5018-0x501b] (PCI address [0x5018-0x501b]) [ 0.555164] pci 0000:04:07.1: BAR 4: assigned [io 0x501c-0x501f] [ 0.555204] pci 0000:04:07.1: BAR 4: error updating (0x00501d != 0x005019) [ 0.555242] pci 0000:04:07.1: BAR 4: set to [io 0x501c-0x501f] (PCI address [0x501c-0x501f]) [ 0.555291] pci 0000:04:07.1: BAR 5: assigned [io 0x5020-0x5023] [ 0.555331] pci 0000:04:07.1: BAR 5: error updating (0x005021 != 0x005025) [ 0.555369] pci 0000:04:07.1: BAR 5: set to [io 0x5020-0x5023] (PCI address [0x5020-0x5023]) [ 0.555418] pci 0000:04:07.2: BAR 0: assigned [io 0x5024-0x5027] [ 0.555458] pci 0000:04:07.2: BAR 0: error updating (0x005025 != 0x005021) [ 0.555496] pci 0000:04:07.2: BAR 0: set to [io 0x5024-0x5027] (PCI address [0x5024-0x5027]) [ 0.555546] pci 0000:04:07.2: BAR 1: assigned [io 0x5028-0x502b] [ 0.555586] pci 0000:04:07.2: BAR 1: error updating (0x005029 != 0x00502d) [ 0.555624] pci 0000:04:07.2: BAR 1: set to [io 0x5028-0x502b] (PCI address [0x5028-0x502b]) [ 0.555674] pci 0000:04:07.2: BAR 2: assigned [io 0x502c-0x502f] [ 0.555713] pci 0000:04:07.2: BAR 2: error updating (0x00502d != 0x005029) [ 0.555752] pci 0000:04:07.2: BAR 2: set to [io 0x502c-0x502f] (PCI address [0x502c-0x502f]) [ 0.555801] pci 0000:04:07.2: BAR 3: assigned [io 0x5030-0x5033] [ 0.555841] pci 0000:04:07.2: BAR 3: error updating (0x005031 != 0x005035) [ 0.555879] pci 0000:04:07.2: BAR 3: set to [io 0x5030-0x5033] (PCI address [0x5030-0x5033]) [ 0.555929] pci 0000:04:07.2: BAR 4: assigned [io 0x5034-0x5037] [ 0.555968] pci 0000:04:07.2: BAR 4: error updating (0x005035 != 0x005031) [ 0.556012] pci 0000:04:07.2: BAR 4: set to [io 0x5034-0x5037] (PCI address [0x5034-0x5037]) [ 0.556062] pci 0000:04:07.2: BAR 5: assigned [io 0x5038-0x503b] [ 0.556102] pci 0000:04:07.2: BAR 5: error updating (0x005039 != 0x00503d) [ 0.556141] pci 0000:04:07.2: BAR 5: set to [io 0x5038-0x503b] (PCI address [0x5038-0x503b]) [ 0.556190] pci 0000:04:07.3: BAR 0: assigned [io 0x503c-0x503f] [ 0.556230] pci 0000:04:07.3: BAR 0: error updating (0x00503d != 0x005039) [ 0.556269] pci 0000:04:07.3: BAR 0: set to [io 0x503c-0x503f] (PCI address [0x503c-0x503f]) [ 0.556318] pci 0000:04:07.3: BAR 1: assigned [io 0x5040-0x5043] [ 0.556358] pci 0000:04:07.3: BAR 1: error updating (0x005041 != 0x005045) [ 0.556397] pci 0000:04:07.3: BAR 1: set to [io 0x5040-0x5043] (PCI address [0x5040-0x5043]) [ 0.556447] pci 0000:04:07.3: BAR 2: assigned [io 0x5044-0x5047] [ 0.556486] pci 0000:04:07.3: BAR 2: error updating (0x005045 != 0x005041) [ 0.556524] pci 0000:04:07.3: BAR 2: set to [io 0x5044-0x5047] (PCI address [0x5044-0x5047]) [ 0.556574] pci 0000:04:07.3: BAR 3: assigned [io 0x5048-0x504b] [ 0.556613] pci 0000:04:07.3: BAR 3: error updating (0x005049 != 0x00504d) [ 0.556651] pci 0000:04:07.3: BAR 3: set to [io 0x5048-0x504b] (PCI address [0x5048-0x504b]) [ 0.556700] pci 0000:04:07.3: BAR 4: assigned [io 0x504c-0x504f] [ 0.556740] pci 0000:04:07.3: BAR 4: error updating (0x00504d != 0x005049) [ 0.556778] pci 0000:04:07.3: BAR 4: set to [io 0x504c-0x504f] (PCI address [0x504c-0x504f]) [ 0.556827] pci 0000:04:07.3: BAR 5: assigned [io 0x5050-0x5053] [ 0.556867] pci 0000:04:07.3: BAR 5: error updating (0x005051 != 0x005055) [ 0.556905] pci 0000:04:07.3: BAR 5: set to [io 0x5050-0x5053] (PCI address [0x5050-0x5053]) [ 0.556954] pci 0000:04:07.4: BAR 0: assigned [io 0x5054-0x5057] [ 0.556994] pci 0000:04:07.4: BAR 0: error updating (0x005055 != 0x005051) [ 0.557038] pci 0000:04:07.4: BAR 0: set to [io 0x5054-0x5057] (PCI address [0x5054-0x5057]) [ 0.557087] pci 0000:04:07.4: BAR 1: assigned [io 0x5058-0x505b] [ 0.557127] pci 0000:04:07.4: BAR 1: error updating (0x005059 != 0x00505d) [ 0.557165] pci 0000:04:07.4: BAR 1: set to [io 0x5058-0x505b] (PCI address [0x5058-0x505b]) [ 0.557214] pci 0000:04:07.4: BAR 2: assigned [io 0x505c-0x505f] [ 0.557254] pci 0000:04:07.4: BAR 2: error updating (0x00505d != 0x005059) [ 0.557292] pci 0000:04:07.4: BAR 2: set to [io 0x505c-0x505f] (PCI address [0x505c-0x505f]) [ 0.557341] pci 0000:04:07.4: BAR 3: assigned [io 0x5060-0x5063] [ 0.557381] pci 0000:04:07.4: BAR 3: error updating (0x005061 != 0x005065) [ 0.557419] pci 0000:04:07.4: BAR 3: set to [io 0x5060-0x5063] (PCI address [0x5060-0x5063]) [ 0.557470] pci 0000:04:07.4: BAR 4: assigned [io 0x5064-0x5067] [ 0.557511] pci 0000:04:07.4: BAR 4: error updating (0x005065 != 0x005061) [ 0.557550] pci 0000:04:07.4: BAR 4: set to [io 0x5064-0x5067] (PCI address [0x5064-0x5067]) [ 0.557601] pci 0000:04:07.4: BAR 5: assigned [io 0x5068-0x506b] [ 0.557642] pci 0000:04:07.4: BAR 5: error updating (0x005069 != 0x00506d) [ 0.557680] pci 0000:04:07.4: BAR 5: set to [io 0x5068-0x506b] (PCI address [0x5068-0x506b]) [ 0.557731] pci 0000:04:07.5: BAR 0: assigned [io 0x506c-0x506f] [ 0.557771] pci 0000:04:07.5: BAR 0: error updating (0x00506d != 0x005069) [ 0.557810] pci 0000:04:07.5: BAR 0: set to [io 0x506c-0x506f] (PCI address [0x506c-0x506f]) [ 0.557862] pci 0000:04:07.5: BAR 1: assigned [io 0x5070-0x5073] [ 0.557903] pci 0000:04:07.5: BAR 1: error updating (0x005071 != 0x005075) [ 0.557941] pci 0000:04:07.5: BAR 1: set to [io 0x5070-0x5073] (PCI address [0x5070-0x5073]) [ 0.557992] pci 0000:04:07.5: BAR 2: assigned [io 0x5074-0x5077] [ 0.558039] pci 0000:04:07.5: BAR 2: error updating (0x005075 != 0x005071) [ 0.558078] pci 0000:04:07.5: BAR 2: set to [io 0x5074-0x5077] (PCI address [0x5074-0x5077]) [ 0.558129] pci 0000:04:07.5: BAR 3: assigned [io 0x5078-0x507b] [ 0.558171] pci 0000:04:07.5: BAR 3: error updating (0x005079 != 0x00507d) [ 0.558210] pci 0000:04:07.5: BAR 3: set to [io 0x5078-0x507b] (PCI address [0x5078-0x507b]) [ 0.558627] pci 0000:04:07.5: BAR 4: assigned [io 0x507c-0x507f] [ 0.558668] pci 0000:04:07.5: BAR 4: error updating (0x00507d != 0x005079) [ 0.558706] pci 0000:04:07.5: BAR 4: set to [io 0x507c-0x507f] (PCI address [0x507c-0x507f]) [ 0.558757] pci 0000:04:07.5: BAR 5: assigned [io 0x5080-0x5083] [ 0.558800] pci 0000:04:07.5: BAR 5: error updating (0x005081 != 0x005085) [ 0.558838] pci 0000:04:07.5: BAR 5: set to [io 0x5080-0x5083] (PCI address [0x5080-0x5083]) [ 0.558890] pci 0000:04:07.6: BAR 0: assigned [io 0x5084-0x5087] [ 0.558932] pci 0000:04:07.6: BAR 0: error updating (0x005085 != 0x005081) [ 0.558970] pci 0000:04:07.6: BAR 0: set to [io 0x5084-0x5087] (PCI address [0x5084-0x5087]) [ 0.559029] pci 0000:04:07.6: BAR 1: assigned [io 0x5088-0x508b] [ 0.559071] pci 0000:04:07.6: BAR 1: error updating (0x005089 != 0x00508d) [ 0.559110] pci 0000:04:07.6: BAR 1: set to [io 0x5088-0x508b] (PCI address [0x5088-0x508b]) [ 0.559162] pci 0000:04:07.6: BAR 2: assigned [io 0x508c-0x508f] [ 0.559203] pci 0000:04:07.6: BAR 2: error updating (0x00508d != 0x005089) [ 0.559242] pci 0000:04:07.6: BAR 2: set to [io 0x508c-0x508f] (PCI address [0x508c-0x508f]) [ 0.559294] pci 0000:04:07.6: BAR 3: assigned [io 0x5090-0x5093] [ 0.559335] pci 0000:04:07.6: BAR 3: error updating (0x005091 != 0x005095) [ 0.559374] pci 0000:04:07.6: BAR 3: set to [io 0x5090-0x5093] (PCI address [0x5090-0x5093]) [ 0.559426] pci 0000:04:07.6: BAR 4: assigned [io 0x5094-0x5097] [ 0.559466] pci 0000:04:07.6: BAR 4: error updating (0x005095 != 0x005091) [ 0.559504] pci 0000:04:07.6: BAR 4: set to [io 0x5094-0x5097] (PCI address [0x5094-0x5097]) [ 0.559555] pci 0000:04:07.6: BAR 5: assigned [io 0x5098-0x509b] [ 0.559594] pci 0000:04:07.6: BAR 5: error updating (0x005099 != 0x00509d) [ 0.559633] pci 0000:04:07.6: BAR 5: set to [io 0x5098-0x509b] (PCI address [0x5098-0x509b]) [ 0.559683] pci 0000:04:07.7: BAR 0: assigned [io 0x509c-0x509f] [ 0.559723] pci 0000:04:07.7: BAR 0: error updating (0x00509d != 0x005099) [ 0.559761] pci 0000:04:07.7: BAR 0: set to [io 0x509c-0x509f] (PCI address [0x509c-0x509f]) [ 0.559812] pci 0000:04:07.7: BAR 1: assigned [io 0x50a0-0x50a3] [ 0.559852] pci 0000:04:07.7: BAR 1: error updating (0x0050a1 != 0x0050a5) [ 0.559890] pci 0000:04:07.7: BAR 1: set to [io 0x50a0-0x50a3] (PCI address [0x50a0-0x50a3]) [ 0.559941] pci 0000:04:07.7: BAR 2: assigned [io 0x50a4-0x50a7] [ 0.559980] pci 0000:04:07.7: BAR 2: error updating (0x0050a5 != 0x0050a1) [ 0.560024] pci 0000:04:07.7: BAR 2: set to [io 0x50a4-0x50a7] (PCI address [0x50a4-0x50a7]) [ 0.560075] pci 0000:04:07.7: BAR 3: assigned [io 0x50a8-0x50ab] [ 0.560115] pci 0000:04:07.7: BAR 3: error updating (0x0050a9 != 0x0050ad) [ 0.560153] pci 0000:04:07.7: BAR 3: set to [io 0x50a8-0x50ab] (PCI address [0x50a8-0x50ab]) [ 0.560204] pci 0000:04:07.7: BAR 4: assigned [io 0x50ac-0x50af] [ 0.560244] pci 0000:04:07.7: BAR 4: error updating (0x0050ad != 0x0050a9) [ 0.560281] pci 0000:04:07.7: BAR 4: set to [io 0x50ac-0x50af] (PCI address [0x50ac-0x50af]) [ 0.560333] pci 0000:04:07.7: BAR 5: assigned [io 0x50b0-0x50b3] [ 0.560372] pci 0000:04:07.7: BAR 5: error updating (0x0050b1 != 0x0050b5) [ 0.560410] pci 0000:04:07.7: BAR 5: set to [io 0x50b0-0x50b3] (PCI address [0x50b0-0x50b3]) about the system: Build Operating System: openSUSE SUSE LINUX Current Operating System: Linux alpha 3.1.9-1.4-desktop #1 SMP PREEMPT Fri Jan 27 08:55:10 UTC 2012 (efb5ff4) x86_64 Kernel command line: root=/dev/mapper/vg01-root resume=/dev/disk/by-id/ata-WDC_WD5002ABYS-02B1B0_WD-WCASY9667774-part3 showopts vga=normal Build Date: 10 November 2011 03:34:36PM Thanks a lot in advance. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] 12.1 | KDE/Pulseaudio questions
by Stefan Gofferje 07 Feb '12

07 Feb '12

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, some time ago, I removed pulseaudio because it didn't let me use my soundcard in analog/full duplex mode. Now I reinstalled it for testing and, well, full duplex works but I have some other issues. First of all, I don't see any device list in Phonon. Normally, there should be a list of devices to priorize. But it looks like this: http://i84.photobucket.com/albums/k26/sgofferj/screenshot10.png I would like to have the priority list back... :) Then I would like to know how I can make specific devices use specific outputs. I use the Flightgear flightsim and with it comes a voice com program, fgcom. It does accept parameters for input/output device and has a list option. However, the list option only shows "default" for in and for out. Ideally, I would like fgcom to use the front mic/front headset while the general sound goes through the 7.1 rear connectors. Any hints, anyone? - -S - -- Infos --------------------------------------------------------------------- enterprise:~ # hwinfo --sound 19: PCI 14.2: 0403 Audio device [Created at pci.319] Unique ID: 5Dex.DTwrdue_pn8 SysFS ID: /devices/pci0000:00/0000:00:14.2 SysFS BusID: 0000:00:14.2 Hardware Class: sound Model: "ATI SBx00 Azalia (Intel HDA)" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4383 "SBx00 Azalia (Intel HDA)" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x841b Revision: 0x40 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xfcff4000-0xfcff7fff (rw,non-prefetchable) IRQ: 16 (7845 events) Module Alias: "pci:v00001002d00004383sv00001043sd0000841Bbc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=yes, avail=yes, need=no, active=unknown 31: PCI 100.1: 0403 Audio device [Created at pci.319] Unique ID: NXNs.y1jILTvHrVC Parent ID: _Znp.UAx368lzOkB SysFS ID: /devices/pci0000:00/0000:00:02.0/0000:01:00.1 SysFS BusID: 0000:01:00.1 Hardware Class: sound Model: "nVidia Audio device" Vendor: pci 0x10de "nVidia Corporation" Device: pci 0x0e08 SubVendor: pci 0x1462 "Micro-Star International Co., Ltd." SubDevice: pci 0x2630 Revision: 0xa1 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xfea7c000-0xfea7ffff (rw,non-prefetchable) IRQ: 19 (72133 events) Module Alias: "pci:v000010DEd00000E08sv00001462sd00002630bc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=yes, avail=yes, need=no, active=unknown Attached to: #10 (PCI bridge) enterprise:~ # aplay -l **** List of PLAYBACK Hardware Devices **** card 0: SB [HDA ATI SB], device 0: ALC892 Analog [ALC892 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: SB [HDA ATI SB], device 1: ALC892 Digital [ALC892 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 - -- (o_ Stefan Gofferje | SCLT, MCP, CCSA //\ Reg'd Linux User #247167 | VCP #2263 V_/_ Heckler & Koch - the original point and click interface 04:52am up 0:51, 4 users, load average: 0.44, 0.22, 0.19 -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.18 (GNU/Linux) iEYEARECAAYFAk8soRAACgkQbQKZlCdPOMO+JwCgr4zxTI5hFwNBebiAM7gxdfpY lIoAoJDsHhzYuWXbvrhTDdVdx1I8qtoG =U+pc -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 4

[opensuse] NFS server in openSUSE 12.1
by Roger Oberholtzer 07 Feb '12

07 Feb '12

I have a new 12.1 install. We have not migrated away from sysvinit yet. That is a work in progress. Anyway, I get a funny message when I try to run any 'insserv' command. Even the command without options: insserv: Service portmap is missed in the runlevels 5 to use service nfsserver So, I thought rpcbind (which provides portmap) was not enabled. I can see that there is no reference to in in the rc5.d directory. So, I tried to enable it: # insserv rpcbind insserv: warning: current start runlevel(s) (3) of script `rpcbind' overwrites defaults (3 5). insserv: warning: current stop runlevel(s) (3) of script `rpcbind' overwrites defaults (3 5). insserv: warning: current start runlevel(s) (3) of script `rpcbind' overwrites defaults (3 5). insserv: warning: current stop runlevel(s) (3) of script `rpcbind' overwrites defaults (3 5). insserv: Service portmap is missed in the runlevels 5 to use service nfsserver Still no reference to it in rc5.d. The sysvinit rpcbind script contains: # Default-Start: 3 5 which should place a reference in rc5.d. Since that does not happen, rpcbind is not available for nfsserver. Seems that the new systemd startup system has a different idea about when rpcbind needs to run. # chkconfig -f rpcbind rpcbind 3 Since no one else has reported this (checked Bugzilla and googled), I am guessing my system is confused. As a start, what do people successfully running 'nfsserver' get for the 'chkconfig -f rpcbind' command? More than just '3', I would imagine. Where is this defined for the new systemd startup? Yours sincerely, Roger Oberholtzer OPQ Systems / Ramböll RST Office: Int +46 10-615 60 20 Mobile: Int +46 70-815 1696 roger.oberholtzer(a)ramboll.se ________________________________________ Ramböll Sverige AB Krukmakargatan 21 P.O. Box 17009 SE-104 62 Stockholm, Sweden www.rambollrst.se -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 15

[opensuse] Re: Which kernel
by Joachim Schrod 07 Feb '12

07 Feb '12

Felix Miata wrote: > On 2012/02/06 06:01 (GMT+0100) Anders Johansson composed: > >> On Sunday 05 February 2012 18:57:57 Felix Miata wrote: > >>> ...proprietary NVidia already installed; accordingly, xorg.conf >>> was >>> created consistent with NVidia custom high DPI operation... > >> kernel-desktop is a good choice for a desktop machine. > > It used to be it was clear that was the case. Or maybe it was > recently changed so that is now the case. I can't remember which, > but I do remember there was a change discussed either here and/or > on the factory list. Executive Summary for Bob: -- Keep kernel-desktop and delete kernel-default. -- If you don't do so already, use the NVidia kmp packages from the community repository. For Felix: Maybe you mean this discussion: A few months ago, it was mentioned here that kernel-desktop is now the "new default" and should be used in most circumstances. kernel-default is primarly supplied for old hardware that doesn't have PAE capabilities. That the name "kernel-default" stuck for the non-default kernel and that the two names were not switched was then attested as unfortunate. It is something that the devs contemplated to change for enhanced clarity, but then decided that it was too much hassle for the gain. AFAIR, there were too many problems with dependencies or something like that. HTH, Joachim PS: Ignore BC, put him in a kill-file. It's better for your health. -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Joachim Schrod Email: jschrod(a)acm.org Roedermark, Germany -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 4

[opensuse] [OT] New open source player for automotive embedded systems
by Roger Oberholtzer 07 Feb '12

07 Feb '12

FYI A Swedish company that makes software for automotive and embedded systems has open sourced it's main product line. Looks like an ambitious effort. http://arccore.com/ Probably not specifically Linux. But definitely GPL and using open source tools in the build chain. Yours sincerely, Roger Oberholtzer OPQ Systems / Ramböll RST Office: Int +46 10-615 60 20 Mobile: Int +46 70-815 1696 roger.oberholtzer(a)ramboll.se ________________________________________ Ramböll Sverige AB Krukmakargatan 21 P.O. Box 17009 SE-104 62 Stockholm, Sweden www.rambollrst.se -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] booting from 2nd drive
by Joe Zien 07 Feb '12

07 Feb '12

My computer is a ThinkCenter M51 tower. I have installed suse 12.1 on my 2nd hd which is a SATA drive, sda8. Grub is installed in the MBR on my 1st PATA drive, hda6. The reason I want to boot from the 2nd drive is that I plan to purchase a new ThinkCenter M91 tower with 2 SATA hd's. The new tower comes with windows 7 and I don't want to mess up the new comp and install grub in the MBR. This may invalidate the warentee. I will install suse12.1 on the 2nd hd in the new tower, using the old tower as a test. What is the best way to make the 2nd drive boot the comp? jozien -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 2

[opensuse] Re: Problems with PDF - Seamonkey & Firefox
by jdd-gmane 06 Feb '12

06 Feb '12

>> I too have had this problem when trying to open more then two pdf"s >> in a row. Only solution is to restart FF or SM then you can open a >> couple more and then repeat the sequence. Or which to Chrome which >> never gives me this problem. same here. not found any solution jdd -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] How to recover from kernel panic ?
by Andreas 06 Feb '12

06 Feb '12

Hi, last night I did an online-update of my OpenSuse 11.4. Now it runs into kernel panic so I can't get the system up anymore. The failover entry of grub doesn't help either. It's a rather unspectacular AMD 5200 that worked w/o issues until now. Is there an way to repair the system without a new install? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 5

[opensuse] GUI application to open mailbox files directly
by Istvan Gabor 06 Feb '12

06 Feb '12

Hello: I am searching for a program with graphical interface to open unix mailbox files directly, for example mailbox files archived on CDs. Mutt has such an option, mutt -f mailboxfile opens the mailbox file, list the e-mails in the file, and e-mails in the list can be selected and read. Is there something similar with a graphical interface? I tried thunderbird with -file option but it did not open the mailbox file. Thanks, Istvan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 2

[opensuse] Reboot Fails After 12.1 64Bit Installation?
by Jesse Palser 06 Feb '12

06 Feb '12

Reboot Fails After 12.1 64Bit Installation? Hi, I've been waiting a long time for a great Linux distribution. (been running Microsoft(R) Windows(R) 7 HP 64Bit for over a year) I tried openSUSE 12.1 64Bit in VirtualBox and it looks and ran fantastically. So I burned the DVD, put a new HDD into computer and installed it. Installation appears to be successful, but when it tries to reboot after install it does not reboot and the screen shown is garbled graphic? (if I reset the computer, I get an operating system is not found error) My computer specs: - Dell XPS 420 desktop - Intel Core2Extreme 4-core CPU - 8GB DDR2 RAM - Western Digital Caviar Black 1TB w/64MB RAM HDD - nVidia GeForce GTS 450 PCIexpress 1GB GDDR5 - Creative SoundBlaster Audigy 1 Anyone have any idea what the problem is and how to successfully install openSUSE 12.1 64Bit onto my computer? Thanks! Jesse -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

12 28

[opensuse] Dolphin Can't Mount Nikon Camera
by Swapnil Bhartiya 06 Feb '12

06 Feb '12

Hi, I am running openSUSE 12.1 and Dolphin, at times, can't mount the camera when plugged via USB while Nautilus can. Nautilus also shows the two cards in the camera and makes it easier for a user to mount unmount where as that's not the case with Dolphin. What am I missing here? https://lh4.googleusercontent.com/-o4VudYk7rxM/Ty9_VkqqFdI/AAAAAAAAHS8/hjXH… Swapnil -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] kwallet and ksshaskpass when logging in via kdm
by Fabian Scheler 06 Feb '12

06 Feb '12

Hi everybody, when logging in from kdm ksshaskpass wants to know my passphrase for my ssh-key, that's fine. And because I stored that password within kwallet, ksshaskpass asks kwallet to hand over that passphrase and I have to unlock that wallet by entering the passphrase for the wallet. The problem is that I just cannot enter this passphrase, and - when hitting ESC - I also cannot enter the passphrase ksshaskpass asks me for. The cursor is blinking in the "password"-field but I cannot type anything there. Can anybody give me a hint how to fix this? To clarify on my complaint/request: I am not interested in a pam-plugin or similar that automagiacally unlocks the wallet when logging in via kdm, I just want to be able to enter the password for kwallet and/or ksshaskpass. Currently I am running the KDE 4.8 packages from the OS 12.1 KDE Factory repository but as far as I can remember this also doesn't work with KDE 4.7.4. Any help is highly appreciated - thanks in advance. Ciao, Fabian -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 4