January 2012 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Fwd: Multicast Routing setup in OpenSUSE 11.3
by Yury Baranov 29 Jan '12

29 Jan '12

Okay, i have very annoying problem and i need your help very badly. I've been lurking about two weeks with lots of experiments but i don't feel successful. Here is my problem. I have local provider network with IPTV service and a gateway with opensuse 11.3. No X, only console ssh access. eth0 is my home network iface, ip 172.24.128.222/255.255.255.0, ip static. eth1 is my local provider iface, ip 10.168.229.33/255.255.255.0, ip static by DHCP. dsl0 is my internet inface, ip dynamic. Everything is working except iptv streaming in my home network. vlc playlist given py provider contains strings like #EXTINF:1,first channel udp://@233.0.41.102:20000 #EXTINF:2,second channel udp://@233.0.42.100:20000 etc... Now i think that streaming is not working because: 1) My Firewall is blocking multicast packets (don't know how to accept them) ---- suse-router:/etc # iptables --list | grep -E Chai\|mult Chain INPUT (policy DROP) Chain FORWARD (policy DROP) Chain OUTPUT (policy ACCEPT) Chain forward_ext (2 references) DROP all -- anywhere anywhere PKTTYPE = multicast Chain forward_int (1 references) DROP all -- anywhere anywhere PKTTYPE = multicast Chain input_ext (3 references) DROP all -- anywhere anywhere PKTTYPE = multicast Chain input_int (1 references) Chain reject_func (1 references) --- 2. I don't know subnet of multicasting network for my provider to config igmpproxy correctly (any help how to find it?) Please, let's try to make full step-by-step instruction 'How to set up IPTV casting'. Now all my experimental things have been turned off, i have igmpproxy installed and waiting for any help, thank you. --- Yury Baranov -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Re: conflicting partition size
by jdd 29 Jan '12

29 Jan '12

Le 28/01/2012 14:15, Anton Aylward a écrit : > decades ago) there are practical problems, but I've found LVM gets > around most of them. > lvm makes it very difficult to repair a damaged partition table and if any of the involved partition fails, all the system is lost jdd -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 10

[opensuse] glib 1.2 build error
by Istvan Gabor 29 Jan '12

29 Jan '12

Hello: As I there are no glib1 packages for openSUSE 12.1 and I could not install gtk1-compat package I tried to build gtk1 and glib1 (1.2.10) on my computer. Configuration of glib1 went without error but make resulted in errors: gcc -DHAVE_CONFIG_H -I. -I. -I. -DG_LOG_DOMAIN=g_log_domain_glib -g -O2 -Wall -D_REENTRANT -c gstrfuncs.c -fPIC -DPIC -o .libs/gstrfuncs.lo gstrfuncs.c: In function 'g_printf_string_upper_bound': gstrfuncs.c:870:19: error: expected ')' before string constant gstrfuncs.c:1037:21: error: expected ')' before string constant gstrfuncs.c:1080:23: error: expected ')' before string constant gstrfuncs.c:1111:19: error: expected ')' before string constant gstrfuncs.c: In function 'g_strdown': gstrfuncs.c:1139:5: warning: pointer targets in assignment differ in signedness [-Wpointer-sign] gstrfuncs.c: In function 'g_strup': gstrfuncs.c:1155:5: warning: pointer targets in assignment differ in signedness [-Wpointer-sign] gstrfuncs.c: In function 'g_strchug': gstrfuncs.c:1314:14: warning: pointer targets in assignment differ in signedness [-Wpointer-sign] gstrfuncs.c:1317:3: warning: pointer targets in passing argument 1 of 'strlen' differ in signedness [-Wpointer-sign] /usr/include/string.h:399:15: note: expected 'const char *' but argument is of type 'guchar *' make[2]: *** [gstrfuncs.lo] Error 1 make[2]: Leaving directory `/home/build/build/glib-1.2.10' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/build/build/glib-1.2.10' make: *** [all-recursive-am] Error 2 build@pc:~/build/glib-1.2.10> I am not a programmer and I don't know how to fix this. I googled and found some hits on ubuntus lists/forums which did not gave a solution I can use. I would appreciate if someone could give advise how to troubleshoot this. Thanks, Istvan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 8

[opensuse] Placement of Thunderbird and Firefox data
by Vojtěch Zeisek 29 Jan '12

29 Jan '12

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, I have silly unimportant question. :-) Just curious. :-) I find Firefox data in ~/.mozilla/firefox It looks logic. But I find Thunderbird data in ~/.thunderbird Why? I'd expect it in ~/.mozilla/thunderbird ;-) Have a nice day! :-) Vojtěch - -- Vojtěch Zeisek Komunita openSUSE GNU/Linuxu Community of the openSUSE GNU/Linux http://www.opensuse.org/ http://trapa.cz/cs -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.18 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQEcBAEBAgAGBQJPJXgOAAoJEPuT69b4zaO5D3AH/1Mtz0mSqSuDXv6GDBA+qgeZ EI8q1Fi4Yu2k0iUUjGpgw2hJRi0qYqjUtDbuGBz56UZC44AqeXukNS07x0vF9txy W+L7vZSSKXTdo2AmIuIppckRQRMGTVtkyijP99+W5ft4HyEeRpS5QhzqiXC1eoLK yRw+A9zQbULp/x5w+87MAeTIakpCajDkELdXHzqX2gQ5WxNkvSU8iTHT0m+qP38I QiFzb6E5lrq/lYhRUXfCZfWrQgp7XaxzAqUKYxv7p3zbgSs/viv6D7AATttsfZDV Ctx75tK/8Ra729qjHSqtq4CVT9wMSyXue6449SZ90HpA6ZhyD9hJcLBe79ojwUc= =wd91 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

Re: [opensuse] opensuse 12.1 locks up
by michael＠actrix.gen.nz 29 Jan '12

29 Jan '12

Someone asked if I was using packagekit - I wasn't. As I understand it packagekit is hooked into something that runs in the panel, I normally shut down the panel item if I ever see it. But I always update using Yast2, so it was not the cause of any issues for me. If I were you, I'd use speedtest.net and run a few speed tests - see if flash does in fact cause you any issues. If it does, try using you system without any flash pages active and see if it is more stable. If you can run speedtest several times without issues, then your problem may be different than mine. It would be good to be able to narrow down something that definitly causes it to crash. Your problem could still be due to hardware issues such as bad RAM or bad BIOS optimisations. Some BIOS's have options to load safe-defaults or load optimised-defaults - might be worth trying. It might also be worth booting into memtest86 (the SUSE installer DVD has a memory test option which is probably just memtest86). On Sat, 28 Jan 2012 14:15:42 George Olson wrote: > On 01/26/2012 04:31 AM, michael(a)actrix.gen.nz wrote: > > When I went to 12.1 I began experiencing crashes. In my case it was a > > BIOS setting that was completely stable under 11.4, but became unstable on > > 12.1. I discovered this was easily triggered by the more agressive flash player > > implementation that I installed with 12.1. > > > > Your issue might not be the same as mine, but as you mentioned you may > > have been running firefox, you might want to check this forum thread and > > see how I resolved my issue: > > > > http://forums.opensuse.org/english/get-technical-help-here/applications/468… > > > > > > > > > > I see that you found some hardware switches on your motherboard, which > when adjusted, made your system stable. I checked my motherboard manual > and it doesn't look like I have any of those switches. > > > It doesn't look like it is possible to go back to flash player 10 with > opensuse 12.1, as I don't see it in the repositories. > > I also noticed a comment on your previous forum thread that we should > not use packagekit. I notice that in my logs packagekit is seen several > times right before the crash. Is there a way to disable packagekit? > > I am using apper to do regular updates, which if I understand right, > communicates with the packagekit daemon to do system updates. Should I > uninstall packagekit, apper, or both? > > George > -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Problem updating dolphin
by Johannes Weberhofer 29 Jan '12

29 Jan '12

Since some days, I get this error message on updating opensuse via zypper dup from 11.4 to 12.1 Retrieving: dolphin-4.7.2-4.4.1.x86_64.rpm [done (379.3 KiB/s)] Digest verification failed for dolphin-4.7.2-4.4.1.x86_64.rpm. Expected 4a73848e62be00c5a04fdfbdeaebe7e7decdb125173de754a65675a6af284d25, found 903b3243f0e3012e5dc9dd01c26b6f618fcb808d65394df97e6724002ce70e4e. This error occurs also, when I use a different update sources (eg. ftp5.gwdg.de). Can someone check, if there is a problem with this package? Best regards, Johannes -- Johannes Weberhofer Weberhofer GmbH, Austria, Vienna -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3

[opensuse] apache log entries wpad 404
by Patrick Shanahan 28 Jan '12

28 Jan '12

My netgear WGT624v3 bit the dust and I became in possession of a cisco E2500. All apparently works properly, some better, but.... My apache log is filling with: 192.168.1.1 - - [28/Jan/2012:17:09:28 -0500] "GET /wpad.dat HTTP/1.1" 404 1043 "-" "-" and 192.168.1.1 - - [28/Jan/2012:14:01:21 -0500] "GET /wpad.dat HTTP/1.1" 404 1043 "-" "System.Net.AutoWebProxyScriptEngine/2.0.50727.5448" I solved the multiple access attempts due to page-not-found by adding a zero bite file /srv/www/htdocs/wpad.dat, but still get log entries that I didn't get with the netgear router. I see that wpad is a "proxy look up" table... which I don't see any use for. How can I configure the system/router to not attempt wpad.dat lookups? google explains much, maybe too much, but offers no plausable solution to my problem that I have discovered. I seriously believe it is directly related to the cisco E2500 router as I never had the log entries before installing/configuring the router on 11 Jan 2012. tks, -- (paka)Patrick Shanahan Plainfield, Indiana, USA HOG # US1244711 http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 http://en.opensuse.org openSUSE Community Member Registered Linux User #207535 @ http://linuxcounter.net -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] eyeballs
by Carl Hartung 28 Jan '12

28 Jan '12

Hi All, I apologize for this OT question but it's extremely brief and my eyes are getting cranky. Could somebody please verify I haven't mangled this IPv6 PTR / rDNS string? I've been looking at this stuff so long today all the 0's and dots and 1's are running together. 2001:740:22:3::ab --> cehartung.com b.a.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.3.\ 0.0.0.2.2.0.0.0.0.4.7.1.0.0.2.ip6.arpa. Thank you *so* much & regards, Carl -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 3

[opensuse] conflicting partition size
by James D. Parra 28 Jan '12

28 Jan '12

Hello, A while ago I cloned a smaller hard dive with my Suse OS to a larger 1 TB drive. Every thing works well how ever the "/" partition still shows the original partition size and not the true size of the partition. For example, 'df' shows the partition as 359 GB; #df -h / Filesystem Size Used Avail Use% Mounted on /dev/sda4 359G 309G 51G 87% / <snip> However parted shows the correct size and 670GB; (parted) print Model: ATA WDC WD1002FBYS-0 (scsi) Disk /dev/sda: 1000GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags <snip> 4 330GB 1000GB 670GB primary xfs type=83 <snip> What can I do to fix this? Many thanks, James -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 5

[opensuse] kmail and kwallet
by eddie 28 Jan '12

28 Jan '12

I do not want to use kwallet. However, kmail the latest version no longer has the option to store the password otherwise (as far as I can tell). Therefore I have to enter my password each time. Does anyone know of an alternative perhaps even as alternative mail client? Thanks Eddie -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 9