August 2011 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Android telephones and openSUSE
by Roger Oberholtzer 18 Aug '11

18 Aug '11

Any suggestions about the best way to use an Android telephone with openSUSE? This is re: things like syncing contacts and perhaps mail. I am guessing the best is to use various Google services as the mediator. So, for example, sync evolution contacts and calenders with Google, and then sync the phone with Google. Or is there a more direct way that does not involve Google services? Yours sincerely, Roger Oberholtzer OPQ Systems / Ramböll RST Office: Int +46 10-615 60 20 Mobile: Int +46 70-815 1696 roger.oberholtzer(a)ramboll.se ________________________________________ Ramböll Sverige AB Krukmakargatan 21 P.O. Box 17009 SE-104 62 Stockholm, Sweden www.rambollrst.se -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

14 29

[opensuse] 11.4 x86_64 DVD-RW no longer burning data DVDs
by Carl Hartung 18 Aug '11

18 Aug '11

Hi All, In re: openSUSE 11.4 x86_64, GNOME 2.3 + some KDE apps/libs I create permanent read-only data DVD backup copies of my works-in-progress roughly every week to ten days. (This is in addition to nightly 'mirror' backups via rsync to a removable hard drive.) I am suddenly unable to create data DVDs using my usual DVD-R media. The process fails in both k3b and native GNOME Nautilus/CD-DVD Creator (brasero?) All previously written discs auto-mount properly and are navigable. The last data DVD set I successfully created was on Aug. 11, 2011 I have since installed quite a number of updates as prompted by 'on-line update'. A copy of the relevant output of 'rpm -q --last' has been uploaded here for review; i.e. I've trimmed those items installed before the last successful burn: <http://cehartung.com/dvd-debug/latest-package-updates.txt> I guess my first question concerns these updates. I don't recognize any 'core' CD/DVD burning libraries as having been affected since the last successful burn. That's probably a reflection of my lack of knowledge in this area. If you're familiar with these things, could you please take a look at the list and advise me which, if any, may have broken the configuration? I have also uploaded various 'debug outputs' and 'lastlogs' and a cropped screen capture of k3b at the point of failure for review: <http://cehartung.com/dvd-debug/brasero-session.log.txt> <http://cehartung.com/dvd-debug/k3b-debugging-output.txt> <http://cehartung.com/dvd-debug/k3b-error.png> <http://cehartung.com/dvd-debug/k3b-lastlog.txt> <http://cehartung.com/dvd-debug/k3b-write-log-with-errors.txt> TIA for any help & regards, Carl -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 1

[opensuse] SATA ?
by Erik Jakobsen 17 Aug '11

17 Aug '11

Hi. I have an old ASRock motherboard K7VT4A and also a K7VT6. Both motherboards have SATA connectors on them. I use a PATA drive where the opensuse is installed on. I would put a SATA drive on both computers, but the SATA drive is not detected. DMESG tells this: [ 2.878304] sata_via 0000:00:0f.0: version 2.6 [ 2.878342] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 2.878442] sata_via 0000:00:0f.0: routed to hard irq line 10 [ 2.878624] scsi2 : sata_via [ 2.878730] scsi3 : sata_via [ 2.878783] ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma 0xdc00 irq 20 [ 2.878787] ata4: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xdc08 irq 20 [ 3.080015] ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 8.188017] ata4: SATA link down 1.5 Gbps (SStatus 1 SControl 300) What can I do to get the drive detected -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 3

[opensuse] configuring a standart fluxbox for every user
by Togan Muftuoglu 17 Aug '11

17 Aug '11

Hi, I am running a bit like a headless chicken, and can't figure out the best way to configure fluxbox settings for every new user. What I mean is I have customized keys, menu, apps, overlay files that I would like to merge with the fluxbox relative files when a new user is created. I thought of creating a /etc/skel/.fluxbox directory but that does not merge the default of /usr/share/fluxbox What am I missing Thanks Togan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Open/LibreOffice - Insert Special Characters from the CLI
by David C. Rankin 16 Aug '11

16 Aug '11

All, Here is a neat little trick that it took me a bit to find, so I'm passing it along. To insert special characters from the keyboard in OO/LO, without having to open the 'Insert Special Character' dialog, all you need to do is: Hold down Ctrl+Shift+U. Release "U" key (while still holding Ctrl+Shift Enter Unicode symbol's hex code (leading 0's not required) Release the Ctrl+Shift keys Try it! To enter the section mark '§' do: Ctrl+Shift < tap 'u' > a7 < release > The keycodes are listed in the Special Character dialog. For the few you usually use, remembering the code is a snap and not having to touch the mouse is a big time saver. Works in most other apps as well. You can also change the Ctrl+Shift+u sequence by redefining the 'Compose Key' designation in the xkb options. (I haven't messed with this, the Ctrl+Shift+u is easy enough... -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 2

[opensuse] ssh passwordless/key problem linux to freebsd
by James D. Parra 16 Aug '11

16 Aug '11

Hello, I generated an ssh key on a Linux server and pushed the public key to the remote server's authorized_keys files with the following command; ssh-copy-id -i ~/.ssh/linux_server.pub freebsd-server ...however a password is still being requested when logging in to the remote bsd server. Once on the remote server I can see the key for the linux server in the authorized_keys file. Any suggestions to resolve the password request? Thank you in advance. James -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

8 11

Re: [opensuse] How to make banshee encrypt to mp3?
by Jo De Baer 16 Aug '11

16 Aug '11

Hi, ran that: Building repository 'Packman' cache [done] Retrieving repository 'Packman Repository' metadata [done] Building repository 'Packman Repository' cache [done] Loading repository data... Reading installed packages... Computing distribution upgrade... The following NEW packages are going to be installed: libnice10 libquicktime0 The following package is going to be REMOVED: libquicktime The following packages are going to be upgraded: flash-player gstreamer-0_10-libnice gstreamer-0_10-plugin-gnomevfs gstreamer-0_10-plugins-good gstreamer-0_10-plugins-good-lang libvpx0 libwavpack1 libxine1 mobile-broadband-provider-info python-numpy The following packages are going to change vendor: gstreamer-0_10-libnice openSUSE -> http://packman.links2linux.de gstreamer-0_10-plugin-gnomevfs openSUSE -> http://packman.links2linux.de libvpx0 openSUSE -> http://packman.links2linux.de libwavpack1 openSUSE -> http://packman.links2linux.de libxine1 openSUSE -> http://packman.links2linux.de mobile-broadband-provider-info openSUSE -> http://packman.links2linux.de python-numpy openSUSE -> http://packman.links2linux.de 10 packages to upgrade, 2 new, 1 to remove, 7 to change vendor. Overall download size: 12.8 MiB. After the operation, additional 1.8 MiB will be used. but still no mp3 encryption when I run "gst-inspect-0.10 | grep -i mp3" - and hence also not in Banshee. I think the problem is the missing gstreamer-lame package - unless you can confirm that you have mp3 in Banshee on your setup? I logged a bug in the mean time. Thanks, J. On Tue, 2011-08-16 at 15:51 -0400, Joakimsen wrote: > Put the priority of packman above opensuse, and then runzypper dup, that way it will replace all the broken packages from opensuse with working one from packman. > > Jo De Baer <jdebaer(a)novell.com> wrote: > > >Did not do the trick - I guess I have to log a bugzilla. > > > >Tx, > > > >J. > > > >On Tue, 2011-08-16 at 06:51 -0700, lists(a)seablues.net wrote: > >> Try the one-click multimedia installation as described in the forums. > >> It rarely fails. > >> > >> http://forums.opensuse.org/english/get-technical-help-here/multimedia/45288… > >> > >> > >> > >> On Mon, 15 Aug 2011 21:55:57 +0100, "Jo De Baer" <jdebaer(a)novell.com> > >> wrote: > >> > Hi, > >> > > >> > I have pulled in all of the below from packman - you can see that > >> > they > >> > all have "pm" in them. > >> > > >> > I think the problem is the missing gstreamer-lame package. I have > >> > found > >> > this package for other distros, but not for openSUSE. This would > >> > explain > >> > why while having both lame and gstreamer installed, lame does not > >> > show > >> > up when I run > >> > > >> > :~/Desktop> gst-inspect-0.10 | grep -i mp3 > >> > typefindfunctions: audio/mpeg: mp3, mp2, mp1, mpga > >> > typefindfunctions: application/x-apetag: mp3, ape, mpc, wv > >> > typefindfunctions: application/x-id3v1: mp3, mp2, mp1, mpga, ogg, > >> > flac, > >> > tta > >> > typefindfunctions: application/x-id3v2: mp3, mp2, mp1, mpga, ogg, > >> > flac, > >> > tta > >> > ffmpeg: ffdec_mp3: FFmpeg MP3 (MPEG audio layer 3) decoder > >> > ffmpeg: ffdec_mp3adu: FFmpeg ADU (Application Data Unit) MP3 (MPEG > >> > audio layer 3) decoder > >> > ffmpeg: ffdec_mp3on4: FFmpeg MP3onMP4 decoder > >> > ffmpeg: ffdemux_mp3: FFmpeg MPEG audio layer 2/3 demuxer > >> > ffmpeg: ffmux_mp3: FFmpeg MPEG audio layer 3 formatter (not > >> > recommended, use id3v2mux instead) > >> > flump3dec: flump3dec: Fluendo MP3 Decoder (IPP build) > >> > > >> > J. > >> > > >> > > >> > > >> > On Mon, 2011-08-15 at 15:37 -0400, Joakimsen wrote: > >> >> As you are seeing, the multimedia packages that ship with openSUSE > >> >> are generally broken or incomplete. > >> >> > >> >> Add the packman repository to your system and m> >> >> Jo De Baer <jdebaer(a)novell.com> wrote: > >> >> > >> >> >It looks like what I need is the gstreamer lame plugin, but nothing > >> >> like > >> >> >that shows up in my configured repos. > >> >> > > >> >> >J. > >> >> > > >> >> > > >> >> > > >> >> > > >> >> >On Mon, 2011-08-15 at 17:03 +0100, Jo De Baer wrote: > >> >> >> Hi, > >> >> >> > >> >> >> I think I have upgraded all necessary components (and more): > >> >> >> > >> >> >> libxine1-codecs-1.1.19-7.pm.50.8.x86_64 > >> >> >> k3b-codecs-2.0.2-8.pm.13.3.x86_64 > >> >> >> gstreamer-0_10-ffmpeg-0.10.11-999.pm.1000.8.x86_64 > >> >> >> ffmpeg-0.8.1-0.pm.1.2.x86_64 > >> >> >> libmp3lame0-3.98.4-3.pm.5.1.x86_64 > >> >> >> lame-3.98.4-3.pm.5.1.x86_64 > >> >> >> libtwolame0-0.3.12-2.pm.2.1.x86_64 > >> >> >> gstreamer-0_10-lang-0.10.35-1.pm.57.2.noarch > >> >> >> gstreamer-0_10-plugins-base-lang-0.10.35-4.pm.55.1.noarch > >> >> >> gstreamer-0_10-ffmpeg-0.10.11-999.pm.1000.8.x86_64 > >> >> >> gstreamer-0_10-utils-0.10.35-1.pm.57.2.x86_64 > >> >> >> gstreamer-utils-0.10.35-1.pm.57.2.x86_64 > >> >> >> gstreamer-0_10-0.10.35-1.pm.57.2.x86_64 > >> >> >> libgstreamer-0_10-0-32bit-0.10.35-1.pm.57.2.x86_64 > >> >> >> gstreamer-0_10-plugins-bad-0.10.22-1.pm.131.7.x86_64 > >> >> >> gstreamer-0_10-plugins-base-0.10.35-4.pm.55.1.x86_64 > >> >> >> gstreamer-0_10-plugins-ugly-0.10.18-1.pm.27.6.x86_64 > >> >> >> gstreamer-0_10-plugins-ugly-lang-0.10.18-1.pm.27.6.noarch > >> >> >> libgstreamer-0_10-0-0.10.35-1.pm.57.2.x86_64 > >> >> >> > >> >> >> but mp3(LAME) still won't show up in banshee. How can I test if > >> >> in the > >> >> >> gstreamer layer all is ok? Right now I get this: > >> >> >> > >> >> >> novell@linux:~/Desktop> gst-inspect-0.10 | grep mp3 > >> >> >> typefindfunctions: audio/mpeg: mp3, mp2, mp1, mpga > >> >> >> typefindfunctions: application/x-apetag: mp3, ape, mpc, wv > >> >> >> typefindfunctions: application/x-id3v1: mp3, mp2, mp1, mpga, ogg, > >> >> flac, > >> >> >> tta > >> >> >> typefindfunctions: application/x-id3v2: mp3, mp2, mp1, mpga, ogg, > >> >> flac, > >> >> >> tta > >> >> >> ffmpeg: ffdec_mp3: FFmpeg MP3 (MPEG audio layer 3) decoder > >> >> >> ffmpeg: ffdec_mp3adu: FFmpeg ADU (Application Data Unit) MP3 > >> >> (MPEG > >> >> >> audio layer 3) decoder > >> >> >> ffmpeg: ffdec_mp3on4: FFmpeg MP3onMP4 decoder > >> >> >> ffmpeg: ffdemux_mp3: FFmpeg MPEG audio layer 2/3 demuxer > >> >> >> ffmpeg: ffmux_mp3: FFmpeg MPEG audio layer 3 formatter (not > >> >> >> recommended, use id3v2mux instead) > >> >> >> flump3dec: flump3dec: Fluendo MP3 Decoder (IPP build) > >> >> >> > >> >> >> I downloaded flump3dec separately from fluendo again. > >> >> >> > >> >> >> Any hints? > >> >> >> > >> >> >> J. > >> >> >> > >> >> > > >> >> > > >> >> >-- > >> >> >To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org > >> >> >For additional commands, e-mail: opensuse+help(a)opensuse.org > >> >> > > >> > > > > > >-- > >To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org > >For additional commands, e-mail: opensuse+help(a)opensuse.org > > > Nry隊Z)z{.ﮞ˛m)z{.+Z+ib*'jW(fvǦj)hǾi -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

Re: [opensuse] How to make banshee encrypt to mp3?
by Joakimsen 16 Aug '11

16 Aug '11

Put the priority of packman above opensuse, and then runzypper dup, that way it will replace all the broken packages from opensuse with working one from packman. Jo De Baer <jdebaer(a)novell.com> wrote: >Did not do the trick - I guess I have to log a bugzilla. > >Tx, > >J. > >On Tue, 2011-08-16 at 06:51 -0700, lists(a)seablues.net wrote: >> Try the one-click multimedia installation as described in the forums. >> It rarely fails. >> >> http://forums.opensuse.org/english/get-technical-help-here/multimedia/45288… >> >> >> >> On Mon, 15 Aug 2011 21:55:57 +0100, "Jo De Baer" <jdebaer(a)novell.com> >> wrote: >> > Hi, >> > >> > I have pulled in all of the below from packman - you can see that >> > they >> > all have "pm" in them. >> > >> > I think the problem is the missing gstreamer-lame package. I have >> > found >> > this package for other distros, but not for openSUSE. This would >> > explain >> > why while having both lame and gstreamer installed, lame does not >> > show >> > up when I run >> > >> > :~/Desktop> gst-inspect-0.10 | grep -i mp3 >> > typefindfunctions: audio/mpeg: mp3, mp2, mp1, mpga >> > typefindfunctions: application/x-apetag: mp3, ape, mpc, wv >> > typefindfunctions: application/x-id3v1: mp3, mp2, mp1, mpga, ogg, >> > flac, >> > tta >> > typefindfunctions: application/x-id3v2: mp3, mp2, mp1, mpga, ogg, >> > flac, >> > tta >> > ffmpeg: ffdec_mp3: FFmpeg MP3 (MPEG audio layer 3) decoder >> > ffmpeg: ffdec_mp3adu: FFmpeg ADU (Application Data Unit) MP3 (MPEG >> > audio layer 3) decoder >> > ffmpeg: ffdec_mp3on4: FFmpeg MP3onMP4 decoder >> > ffmpeg: ffdemux_mp3: FFmpeg MPEG audio layer 2/3 demuxer >> > ffmpeg: ffmux_mp3: FFmpeg MPEG audio layer 3 formatter (not >> > recommended, use id3v2mux instead) >> > flump3dec: flump3dec: Fluendo MP3 Decoder (IPP build) >> > >> > J. >> > >> > >> > >> > On Mon, 2011-08-15 at 15:37 -0400, Joakimsen wrote: >> >> As you are seeing, the multimedia packages that ship with openSUSE >> >> are generally broken or incomplete. >> >> >> >> Add the packman repository to your system and more than likely it >> >> will work. >> >> http://packman.links2linux.org/ >> >> >> >> Jo De Baer <jdebaer(a)novell.com> wrote: >> >> >> >> >It looks like what I need is the gstreamer lame plugin, but nothing >> >> like >> >> >that shows up in my configured repos. >> >> > >> >> >J. >> >> > >> >> > >> >> > >> >> > >> >> >On Mon, 2011-08-15 at 17:03 +0100, Jo De Baer wrote: >> >> >> Hi, >> >> >> >> >> >> I think I have upgraded all necessary components (and more): >> >> >> >> >> >> libxine1-codecs-1.1.19-7.pm.50.8.x86_64 >> >> >> k3b-codecs-2.0.2-8.pm.13.3.x86_64 >> >> >> gstreamer-0_10-ffmpeg-0.10.11-999.pm.1000.8.x86_64 >> >> >> ffmpeg-0.8.1-0.pm.1.2.x86_64 >> >> >> libmp3lame0-3.98.4-3.pm.5.1.x86_64 >> >> >> lame-3.98.4-3.pm.5.1.x86_64 >> >> >> libtwolame0-0.3.12-2.pm.2.1.x86_64 >> >> >> gstreamer-0_10-lang-0.10.35-1.pm.57.2.noarch >> >> >> gstreamer-0_10-plugins-base-lang-0.10.35-4.pm.55.1.noarch >> >> >> gstreamer-0_10-ffmpeg-0.10.11-999.pm.1000.8.x86_64 >> >> >> gstreamer-0_10-utils-0.10.35-1.pm.57.2.x86_64 >> >> >> gstreamer-utils-0.10.35-1.pm.57.2.x86_64 >> >> >> gstreamer-0_10-0.10.35-1.pm.57.2.x86_64 >> >> >> libgstreamer-0_10-0-32bit-0.10.35-1.pm.57.2.x86_64 >> >> >> gstreamer-0_10-plugins-bad-0.10.22-1.pm.131.7.x86_64 >> >> >> gstreamer-0_10-plugins-base-0.10.35-4.pm.55.1.x86_64 >> >> >> gstreamer-0_10-plugins-ugly-0.10.18-1.pm.27.6.x86_64 >> >> >> gstreamer-0_10-plugins-ugly-lang-0.10.18-1.pm.27.6.noarch >> >> >> libgstreamer-0_10-0-0.10.35-1.pm.57.2.x86_64 >> >> >> >> >> >> but mp3(LAME) still won't show up in banshee. How can I test if >> >> in the >> >> >> gstreamer layer all is ok? Right now I get this: >> >> >> >> >> >> novell@linux:~/Desktop> gst-inspect-0.10 | grep mp3 >> >> >> typefindfunctions: audio/mpeg: mp3, mp2, mp1, mpga >> >> >> typefindfunctions: application/x-apetag: mp3, ape, mpc, wv >> >> >> typefindfunctions: application/x-id3v1: mp3, mp2, mp1, mpga, ogg, >> >> flac, >> >> >> tta >> >> >> typefindfunctions: application/x-id3v2: mp3, mp2, mp1, mpga, ogg, >> >> flac, >> >> >> tta >> >> >> ffmpeg: ffdec_mp3: FFmpeg MP3 (MPEG audio layer 3) decoder >> >> >> ffmpeg: ffdec_mp3adu: FFmpeg ADU (Application Data Unit) MP3 >> >> (MPEG >> >> >> audio layer 3) decoder >> >> >> ffmpeg: ffdec_mp3on4: FFmpeg MP3onMP4 decoder >> >> >> ffmpeg: ffdemux_mp3: FFmpeg MPEG audio layer 2/3 demuxer >> >> >> ffmpeg: ffmux_mp3: FFmpeg MPEG audio layer 3 formatter (not >> >> >> recommended, use id3v2mux instead) >> >> >> flump3dec: flump3dec: Fluendo MP3 Decoder (IPP build) >> >> >> >> >> >> I downloaded flump3dec separately from fluendo again. >> >> >> >> >> >> Any hints? >> >> >> >> >> >> J. >> >> >> >> >> > >> >> > >> >> >-- >> >> >To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org >> >> >For additional commands, e-mail: opensuse+help(a)opensuse.org >> >> > >> > > >-- >To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org >For additional commands, e-mail: opensuse+help(a)opensuse.org > N��r��y隊Z)z{.�ﮞ˛��m�)z{.��+�Z+i�b�*'jW(�f�vǦj)h��Ǿ��i��

1 0

Re: [opensuse] How to make banshee encrypt to mp3?
by Jo De Baer 16 Aug '11

16 Aug '11

Did not do the trick - I guess I have to log a bugzilla. Tx, J. On Tue, 2011-08-16 at 06:51 -0700, lists(a)seablues.net wrote: > Try the one-click multimedia installation as described in the forums. > It rarely fails. > > http://forums.opensuse.org/english/get-technical-help-here/multimedia/45288… > > > > On Mon, 15 Aug 2011 21:55:57 +0100, "Jo De Baer" <jdebaer(a)novell.com> > wrote: > > Hi, > > > > I have pulled in all of the below from packman - you can see that > > they > > all have "pm" in them. > > > > I think the problem is the missing gstreamer-lame package. I have > > found > > this package for other distros, but not for openSUSE. This would > > explain > > why while having both lame and gstreamer installed, lame does not > > show > > up when I run > > > > :~/Desktop> gst-inspect-0.10 | grep -i mp3 > > typefindfunctions: audio/mpeg: mp3, mp2, mp1, mpga > > typefindfunctions: application/x-apetag: mp3, ape, mpc, wv > > typefindfunctions: application/x-id3v1: mp3, mp2, mp1, mpga, ogg, > > flac, > > tta > > typefindfunctions: application/x-id3v2: mp3, mp2, mp1, mpga, ogg, > > flac, > > tta > > ffmpeg: ffdec_mp3: FFmpeg MP3 (MPEG audio layer 3) decoder > > ffmpeg: ffdec_mp3adu: FFmpeg ADU (Application Data Unit) MP3 (MPEG > > audio layer 3) decoder > > ffmpeg: ffdec_mp3on4: FFmpeg MP3onMP4 decoder > > ffmpeg: ffdemux_mp3: FFmpeg MPEG audio layer 2/3 demuxer > > ffmpeg: ffmux_mp3: FFmpeg MPEG audio layer 3 formatter (not > > recommended, use id3v2mux instead) > > flump3dec: flump3dec: Fluendo MP3 Decoder (IPP build) > > > > J. > > > > > > > > On Mon, 2011-08-15 at 15:37 -0400, Joakimsen wrote: > >> As you are seeing, the multimedia packages that ship with openSUSE > >> are generally broken or incomplete. > >> > >> Add the packman repository to your system and more than likely it > >> will work. > >> http://packman.links2linux.org/ > >> > >> Jo De Baer <jdebaer(a)novell.com> wrote: > >> > >> >It looks like what I need is the gstreamer lame plugin, but nothing > >> like > >> >that shows up in my configured repos. > >> > > >> >J. > >> > > >> > > >> > > >> > > >> >On Mon, 2011-08-15 at 17:03 +0100, Jo De Baer wrote: > >> >> Hi, > >> >> > >> >> I think I have upgraded all necessary components (and more): > >> >> > >> >> libxine1-codecs-1.1.19-7.pm.50.8.x86_64 > >> >> k3b-codecs-2.0.2-8.pm.13.3.x86_64 > >> >> gstreamer-0_10-ffmpeg-0.10.11-999.pm.1000.8.x86_64 > >> >> ffmpeg-0.8.1-0.pm.1.2.x86_64 > >> >> libmp3lame0-3.98.4-3.pm.5.1.x86_64 > >> >> lame-3.98.4-3.pm.5.1.x86_64 > >> >> libtwolame0-0.3.12-2.pm.2.1.x86_64 > >> >> gstreamer-0_10-lang-0.10.35-1.pm.57.2.noarch > >> >> gstreamer-0_10-plugins-base-lang-0.10.35-4.pm.55.1.noarch > >> >> gstreamer-0_10-ffmpeg-0.10.11-999.pm.1000.8.x86_64 > >> >> gstreamer-0_10-utils-0.10.35-1.pm.57.2.x86_64 > >> >> gstreamer-utils-0.10.35-1.pm.57.2.x86_64 > >> >> gstreamer-0_10-0.10.35-1.pm.57.2.x86_64 > >> >> libgstreamer-0_10-0-32bit-0.10.35-1.pm.57.2.x86_64 > >> >> gstreamer-0_10-plugins-bad-0.10.22-1.pm.131.7.x86_64 > >> >> gstreamer-0_10-plugins-base-0.10.35-4.pm.55.1.x86_64 > >> >> gstreamer-0_10-plugins-ugly-0.10.18-1.pm.27.6.x86_64 > >> >> gstreamer-0_10-plugins-ugly-lang-0.10.18-1.pm.27.6.noarch > >> >> libgstreamer-0_10-0-0.10.35-1.pm.57.2.x86_64 > >> >> > >> >> but mp3(LAME) still won't show up in banshee. How can I test if > >> in the > >> >> gstreamer layer all is ok? Right now I get this: > >> >> > >> >> novell@linux:~/Desktop> gst-inspect-0.10 | grep mp3 > >> >> typefindfunctions: audio/mpeg: mp3, mp2, mp1, mpga > >> >> typefindfunctions: application/x-apetag: mp3, ape, mpc, wv > >> >> typefindfunctions: application/x-id3v1: mp3, mp2, mp1, mpga, ogg, > >> flac, > >> >> tta > >> >> typefindfunctions: application/x-id3v2: mp3, mp2, mp1, mpga, ogg, > >> flac, > >> >> tta > >> >> ffmpeg: ffdec_mp3: FFmpeg MP3 (MPEG audio layer 3) decoder > >> >> ffmpeg: ffdec_mp3adu: FFmpeg ADU (Application Data Unit) MP3 > >> (MPEG > >> >> audio layer 3) decoder > >> >> ffmpeg: ffdec_mp3on4: FFmpeg MP3onMP4 decoder > >> >> ffmpeg: ffdemux_mp3: FFmpeg MPEG audio layer 2/3 demuxer > >> >> ffmpeg: ffmux_mp3: FFmpeg MPEG audio layer 3 formatter (not > >> >> recommended, use id3v2mux instead) > >> >> flump3dec: flump3dec: Fluendo MP3 Decoder (IPP build) > >> >> > >> >> I downloaded flump3dec separately from fluendo again. > >> >> > >> >> Any hints? > >> >> > >> >> J. > >> >> > >> > > >> > > >> >-- > >> >To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org > >> >For additional commands, e-mail: opensuse+help(a)opensuse.org > >> > > -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

Re: [opensuse] How to make banshee encrypt to mp3?
by Jo De Baer 16 Aug '11

16 Aug '11

Hi, I have pulled in all of the below from packman - you can see that they all have "pm" in them. I think the problem is the missing gstreamer-lame package. I have found this package for other distros, but not for openSUSE. This would explain why while having both lame and gstreamer installed, lame does not show up when I run :~/Desktop> gst-inspect-0.10 | grep -i mp3 typefindfunctions: audio/mpeg: mp3, mp2, mp1, mpga typefindfunctions: application/x-apetag: mp3, ape, mpc, wv typefindfunctions: application/x-id3v1: mp3, mp2, mp1, mpga, ogg, flac, tta typefindfunctions: application/x-id3v2: mp3, mp2, mp1, mpga, ogg, flac, tta ffmpeg: ffdec_mp3: FFmpeg MP3 (MPEG audio layer 3) decoder ffmpeg: ffdec_mp3adu: FFmpeg ADU (Application Data Unit) MP3 (MPEG audio layer 3) decoder ffmpeg: ffdec_mp3on4: FFmpeg MP3onMP4 decoder ffmpeg: ffdemux_mp3: FFmpeg MPEG audio layer 2/3 demuxer ffmpeg: ffmux_mp3: FFmpeg MPEG audio layer 3 formatter (not recommended, use id3v2mux instead) flump3dec: flump3dec: Fluendo MP3 Decoder (IPP build) J. On Mon, 2011-08-15 at 15:37 -0400, Joakimsen wrote: > As you are seeing, the multimedia packages that ship with openSUSE are generally broken or incomplete. > > Add the packman repository to your system and more than likely it will work. > http://packman.links2linux.org/ > > Jo De Baer <jdebaer(a)novell.com> wrote: > > >It looks like what I need is the gstreamer lame plugin, but nothing like > >that shows up in my configured repos. > > > >J. > > > > > > > > > >On Mon, 2011-08-15 at 17:03 +0100, Jo De Baer wrote: > >> Hi, > >> > >> I think I have upgraded all necessary components (and more): > >> > >> libxine1-codecs-1.1.19-7.pm.50.8.x86_64 > >> k3b-codecs-2.0.2-8.pm.13.3.x86_64 > >> gstreamer-0_10-ffmpeg-0.10.11-999.pm.1000.8.x86_64 > >> ffmpeg-0.8.1-0.pm.1.2.x86_64 > >> libmp3lame0-3.98.4-3.pm.5.1.x86_64 > >> lame-3.98.4-3.pm.5.1.x86_64 > >> libtwolame0-0.3.12-2.pm.2.1.x86_64 > >> gstreamer-0_10-lang-0.10.35-1.pm.57.2.noarch > >> gstreamer-0_10-plugins-base-lang-0.10.35-4.pm.55.1.noarch > >> gstreamer-0_10-ffmpeg-0.10.11-999.pm.1000.8.x86_64 > >> gstreamer-0_10-utils-0.10.35-1.pm.57.2.x86_64 > >> gstreamer-utils-0.10.35-1.pm.57.2.x86_64 > >> gstreamer-0_10-0.10.35-1.pm.57.2.x86_64 > >> libgstreamer-0_10-0-32bit-0.10.35-1.pm.57.2.x86_64 > >> gstreamer-0_10-plugins-bad-0.10.22-1.pm.131.7.x86_64 > >> gstreamer-0_10-plugins-base-0.10.35-4.pm.55.1.x86_64 > >> gstreamer-0_10-plugins-ugly-0.10.18-1.pm.27.6.x86_64 > >> gstreamer-0_10-plugins-ugly-lang-0.10.18-1.pm.27.6.noarch > >> libgstreamer-0_10-0-0.10.35-1.pm.57.2.x86_64 > >> > >> but mp3(LAME) still won't show up in banshee. How can I test if in the > >> gstreamer layer all is ok? Right now I get this: > >> > >> novell@linux:~/Desktop> gst-inspect-0.10 | grep mp3 > >> typefindfunctions: audio/mpeg: mp3, mp2, mp1, mpga > >> typefindfunctions: application/x-apetag: mp3, ape, mpc, wv > >> typefindfunctions: application/x-id3v1: mp3, mp2, mp1, mpga, ogg, flac, > >> tta > >> typefindfunctions: application/x-id3v2: mp3, mp2, mp1, mpga, ogg, flac, > >> tta > >> ffmpeg: ffdec_mp3: FFmpeg MP3 (MPEG audio layer 3) decoder > >> ffmpeg: ffdec_mp3adu: FFmpeg ADU (Application Data Unit) MP3 (MPEG > >> audio layer 3) decoder > >> ffmpeg: ffdec_mp3on4: FFmpeg MP3onMP4 decoder > >> ffmpeg: ffdemux_mp3: FFmpeg MPEG audio layer 2/3 demuxer > >> ffmpeg: ffmux_mp3: FFmpeg MPEG audio layer 3 formatter (not > >> recommended, use id3v2mux instead) > >> flump3dec: flump3dec: Fluendo MP3 Decoder (IPP build) > >> > >> I downloaded flump3dec separately from fluendo again. > >> > >> Any hints? > >> > >> J. > >> > > > > > >-- > >To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org > >For additional commands, e-mail: opensuse+help(a)opensuse.org > > -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1