May 2011 - openSUSE Users - openSUSE Mailing Lists

[opensuse] zypper dup results in error: DB_RUNRECOVERY
by Konstantinos Georgokitsos 25 May '11

25 May '11

Hiall, just trying to do a distro upgrade with zypper from 11.2 to 11.4. I replaced the repos with the corresponding 11.4 versions and the zypper update went well. Now after zypper dup and about 15 mins of downloading and installing, I see a whole series of errors in the following style (there are hundreds until the shell buffer ends, all within /usr/src/linux-2.6.37.6-0.5- obj/i386/debug/include/config/): error: db4 error(-30977) from dbcursor->c_get: DB_RUNRECOVERY: Fatal error, run database recovery error: error(-30977) getting "/usr/src/linux-2.6.37.6-0.5- obj/i386/debug/include/config/strip/asm/" records from Dirnames index Any ideas? should I just retry zypper dup? Kostas -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 3

[opensuse] livecd
by mattias 25 May '11

25 May '11

What are the root password on the live cd? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 2

[opensuse] Major failure of 11.4 installation
by Joseph Comfort 24 May '11

24 May '11

I have nicely installed 11.4 on 3 desktops and 1 laptop with no obvious issues (except a couple of small ones). But it failed substantially on a 4th desktop. There was a whole range of problems, a frequent one being simply a dead freeze (no display, no response). They could occur while updating rpms, compiling code, or just sitting idle. An annoying part was that the computer is on a network switch with 2 other computers, both running 11.4. All 3 computers do nfs mounts from the others. When the computer failed, the other computers would hang, and I could not ping to any of them. I considered hardware issues. The hard disks check out just fine with SMART. I changed the power supply, with no benefit. I have a new CPU chip on order (it is faster anyway). With various checking and reinstallations, I have spent a few days on the problem. Today, I reinstalled 11.3. The computer is running fine, and all looks splendid. The long compilations went fine. I pushed the cpu hard (loads up to 2.1), with no problems. Something seems wrong with the 11.4 system. I use the base (KDE) install, but add a lot of rpms for my needs. The crashes seldom left any messages of failure. Any messages I saw did not seem helpful, nor were the failures ever reproducible. I have no idea where the problem is. I do not know what to specify for a bug report. My configuration is: Motherboard: Asus M2N-E CPU: AMD Athlon 64 X2 4200+ (to be replaced with a 5200+) Graphics: nVidia GeForce 7600 GS Monitor: Viewsonic G810 (1600x1200) Kernel: 2.6.37.6-0.5 Maybe I need another message for this, but the two small problems are: 1) When booting the 11.4 computers, the mount-nfs process starts _very_ early, and the booting has to wait for a timeout. This should be fixed (does not happen on 11.3). Once booted, all the disks are mounted. 2) One computer has a Viewsonic VA2431wm monitor, with a 1920x1080 display. When the installation gets to bringing up the login screen, the display becomes a pattern of rectangles. I have to reboot into the Failsafe mode, and then install the proprietary Nvidia drivers to make the display behave properly. Display of this size are now common, and the installation code should accommodate to them. Thank you, Joe Comfort -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

5 6

[opensuse] anyone seen this yet?
by Ian 24 May '11

24 May '11

http://www.volkswagen-vans.co.uk/amarok-range/amarok/overview -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 6

[opensuse] Amavis>clamd>spamd
by Jim Flanagan 24 May '11

24 May '11

Whats the best way to scan for spam on my email server? I'm trying to get amavis working with postfix and clamd and spamd. I have amavis running, as are clamd and spamd. Clamd is running and checking its databases. Freshclam is checking for updates. But nothing is being scanned as far as I can tell. I have my fqdn set in amavisd.conf, as well as the lines for clamd un-remarked. Not sure what else needs to be done to get the scan working. Thanks for any help. Jim f -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 3

[opensuse] Intel board DH67CLB3
by Wong 24 May '11

24 May '11

Dear all, Need your share about using Intel Motherboard DH67CLB3 with OpenSuSE 11.2 (text mode). Do drivers for LAN, SATA, and FSB work well? Thanks a lot for your info Best Regards, Wong -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Postfix - port 587
by Jim Flanagan 24 May '11

24 May '11

What is the best way to set Postfix to listen to smtp traffic on port 587, and 25 at the same time? I'd like to set up a remote client to connect to my server on that port using starttls. Many thanks, Jim F -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 2

[opensuse] OpenSuSE 11.4, kernel 2.6.37.6-0.5-default and random lockups on HP DL360
by Claudio Prono 24 May '11

24 May '11

Hello all, Into the last week i have some problems with a new upgraded system. That system is worked well for 1 week, then the last weekend it locked up. It is alive, terminal switching is working but if i write into the login and press enter, it locks up. From the external, the machine answers to the ping, but any service is present (syn-synack done), but no response (connection hangs). I am now thinking can be a problem of the new kernel, but i am not sure. Can be also an hardware problem, i dunno... For that cause i need an external opinion... What i can do to debug this? Any help is well accepted. Cordially, Claudio Prono. -- -------------------------------------------------------------------------------- Claudio Prono OPST System Developer Gsm: +39-349-54.33.258 @PSS Srl Tel: +39-011-32.72.100 Via San Bernardino, 17 Fax: +39-011-32.46.497 10141 Torino - ITALY http://atpss.net/disclaimer -------------------------------------------------------------------------------- PGP Key - http://keys.atpss.net/c_prono.asc -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 6

[opensuse] 11.4 PAM_env prob: unable to dlopen(...pam_env.so) lib64/libpam.so.0 version LIBPAM_MODUTIL_1.1.3...
by Linda Walsh 24 May '11

24 May '11

After upgrading to 11.4, I've noticed that my 'REMOTEHOST' and 'DISPLAY' env vars aren't being set correctly. REMOTEHOST not at all, and DISPLAY is incorrect. I checked all the config files and they were fine -- then I noticed this in the log: sshd[22911]: PAM unable to dlopen(/lib64/security/pam_env.so): /lib64/libpam.so.0: version `LIBPAM_MODUTIL_1.1.3' not found (required by /lib64/security/pam_env.so) (where it is happening for multiple progs besides sshd, .. cron, dovecot, etc...). The files appear to be in the correct location and the versions are all matching from coming from 11.4, and in fact, using readelf to dump /lib64/libpam.so.0, I see LIBPAM_MODUTIL_1.1.3 (multiple places, but importantly, I think as a GLOBAL DEFAULT ABS OBJECT: readelf --dyn-syms libpam.so.0|grep 1.1.3 75: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LIBPAM_MODUTIL_1.1.3 99: 0000000000009c80 271 FUNC GLOBAL DEFAULT 13 pam_modutil_regain_priv@@LIBPAM_MODUTIL_1.1.3 105: 0000000000009a40 561 FUNC GLOBAL DEFAULT 13 pam_modutil_drop_priv@@LIBPAM_MODUTIL_1.1.3 files look 'reasonable'... /lib64> llg libpam* lrwxrwxrwx 1 root root 17 May 22 13:32 libpamc.so.0 -> libpamc.so.0.82.1* -rwxr-xr-x 1 root root 14664 Feb 27 04:19 libpamc.so.0.82.1* lrwxrwxrwx 1 root root 21 May 22 13:32 libpam_misc.so.0 -> libpam_misc.so.0.82.0* -rwxr-xr-x 1 root root 14664 Feb 27 04:19 libpam_misc.so.0.82.0* lrwxrwxrwx 1 root root 16 May 22 13:32 libpam.so.0 -> libpam.so.0.83.0* -rwxr-xr-x 1 root root 56048 Feb 27 04:19 libpam.so.0.83.0* Help? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] Binder_Peter
by John Andersen 23 May '11

23 May '11

Can the mail list admin please delete this person? One bounce for every post. <binder_peter(a)lnx.net>: host 127.0.0.1[127.0.0.1] said: 550 Recipient <binder_peter(a)lnx.net> FAIL (in reply to RCPT TO command) -- _____________________________________ ---This space for rent--- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 4