April 2011 - openSUSE Users - openSUSE Mailing Lists

[opensuse] LibreOffice - have to hit print "TWICE" before a document will print -- anybody else?
by David C. Rankin 16 Apr '11

16 Apr '11

Guys, Aside from the document spacing issue with Libre, I am experiencing a bizarre printing issue with Libre as well. For some strange reason, I have to hit the print button TWICE before a document will print. First time the print button is pressed - nothing -- the hp laserjet 4100n just sits there idle. Hit print for the second time and -- presto, the printer springs to life just like it should. I have tried printing from other apps in kde kate/kwrite/kpdf, etc.. and everything prints on the first click of the print button. But... not with Libre. Any ideas about what could be causing this? The printer itself is a 4100n attached to the network via the HPDirect network controller that is built into the printer. It is configured via cups on the network server at work and prints fine for everything except libre. The printer has a fixed IP of 192.168.7.21 and the /etc/cups/printers.conf on the server 'phoenix' is: # Printer configuration file for CUPS v1.4.6 # Written by cupsd on 2011-04-15 12:42 # DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING <Printer dcr4100n> AuthInfoRequired none Info HP Laserjet 4100n Location David Office MakeModel HP LaserJet 4100 Foomatic/Postscript DeviceURI socket://192.168.7.21 State Idle StateTime 1302889341 Reason toner-low-report Type 8400916 Filter application/vnd.cups-raw 0 - Filter application/vnd.cups-postscript 100 foomatic-rip Filter application/vnd.cups-pdf 0 foomatic-rip Accepting Yes Shared Yes JobSheets none none QuotaPeriod 0 PageLimit 0 KLimit 0 OpPolicy default ErrorPolicy stop-printer Attribute marker-colors none Attribute marker-levels 7 Attribute marker-names Toner Cartridge HP C8061X Attribute marker-types toner Attribute marker-change-time 1302889340 </Printer> <snip> I doubt the printer config has anything to do with it since I can print fine with all other apps. Has anybody seen or heard of this type of problem before? I would like to collect as much info as I can to help the guys as the document foundation find out what is going on. So what say the printing gurus? -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] After motherboard chage, OS thinks that the old board is still in
by Stefan Gofferje 16 Apr '11

16 Apr '11

Hi, I have a pretty weird issue here. I just ran an update from OS11.2 -> OS11.4 and after that, most of the hardware doesn't work anymore. hwinfo shows me now several devices which belong to the old board which I threw out like 1,5 years ago. Interesting enough, if I boot the rescue system, hwinfo shows the correct hardware information. Just if I boot from the updated system, it shows all the devs from the old board. The machine in question is my main server here at home, so I would prefer NOT to do a full reinstall. Setting up all the services again from scratch would take days of nonstop work! Where might hwinfo get the weird hardware data from? Posting logs or outputs is rather impossible. USB devices are not recognized and neither is the NIC. --Stefan -- (o_ Stefan Gofferje | SuSE Certified Linux Trainer 2001 //\ Reg'd Linux User #247167 | vmware Certified Professional V_/_ Linux is like a Wigwam - No gates, no windows, Apache inside -- GMX DSL Doppel-Flat ab 19,99 Euro/mtl.! Jetzt mit gratis Handy-Flat! http://portal.gmx.net/de/go/dsl -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 5

[opensuse] Opensuse 11.3
by mattias 15 Apr '11

15 Apr '11

Are it possible to download opensuse 11.3? I only find the new 11.04 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 2

[opensuse] Gstreamer help needed
by Robert Schweikert 15 Apr '11

15 Apr '11

Gstreamer experts, I am playing around with Pithos (pandora desktop client) and am getting the following errors: ERROR:root:Gstreamer error: Your GStreamer installation is missing a plug-in., gstdecodebin2.c(3135): gst_decode_bin_expose (): /GstPlayBin2:player/GstURIDecodeBin:uridecodebin0/GstDecodeBin2:decodebin20: no suitable plugins found The count for dcodebinX goes up to 27, just in case this means anything. I know pithos works on another distribution. Questions: Is the version of gstreamer we have in openSUSE 11.4 too old? That would be sad considering we just released. Do I not have the right dependencies in my package. My current list of gstreamer related packages on my system is as follows: # rpm -qa | grep gstreamer libgstreamer-0_10-0-32bit-0.10.32-4.1.x86_64 gstreamer-0_10-0.10.32-4.1.x86_64 libgstreamer-0_10-0-0.10.32-4.1.x86_64 gstreamer-0_10-plugin-gnomevfs-0.10.32-4.1.x86_64 banshee-1-backend-engine-gstreamer-1.9.3-4.7.4.x86_64 gstreamer-0_10-lang-0.10.32-4.1.noarch gstreamer-0_10-plugin-hal-0.10.27-4.5.1.x86_64 gstreamer-utils-0.10.32-4.1.x86_64 gstreamer-0_10-libnice-0.0.13-2.3.x86_64 gstreamer-0_10-utils-0.10.32-4.1.x86_64 PackageKit-gstreamer-plugin-0.6.12-1.4.1.x86_64 gstreamer-0_10-plugins-bad-0.10.21-8.6.x86_64 gstreamer-0_10-plugins-base-0.10.32-4.1.x86_64 python-gstreamer-0_10-0.10.20-2.1.x86_64 phonon-backend-gstreamer-0_10-4.4.4-3.1.x86_64 gstreamer-0_10-plugins-good-0.10.27-4.5.1.x86_64 gstreamer-0_10-fluendo-mp3-12-2.1.x86_64 Help is appreciated. Thanks, Robert -- Robert Schweikert MAY THE SOURCE BE WITH YOU Novell-IBM Software Integration Center LINUX Tech Lead rschweikert(a)novell.com rschweikert(a)ca.ibm.com 781-464-8147 Novell Making IT Work As One -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] sound
by mattias 15 Apr '11

15 Apr '11

have opensuse follow centos way on the live cd and mute sound default -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 9

[opensuse] Re: No sound from apps M Audio 2496 on 11.4
by Charles Philip Chan 15 Apr '11

15 Apr '11

michael norman <michaeltnorman(a)bethere.co.uk> writes: > On a new installation of 11.4 64 bit KDE desktopn with an M Audio 2496 > soundcard I am not getting any sound output from any apps. neither do > system sounds work. I have checked the mixer settings which are ok. Is your onboard sound enabled too? Your card might not be setup as the default device. What is the output of: ,---- | aplay -l `---- If it is the default device, do you see any output in /var/log/messages when playing something? Also I presume the PCM channel is unmuted (since you say that the mixer settings are OK) and the correct modules are loaded- What is the output of: ,---- | lsmod | grep 1712 `---- Charles -- "MSDOS didn't get as bad as it is overnight -- it took over ten years of careful development." (By dmeggins(a)aix1.uottawa.ca)

1 0

[opensuse] Cannot boot SUSE Studio image on real hardware
by Ilya Chernykh 14 Apr '11

14 Apr '11

A SUSE Studio Live CD image works well inside the Studio, but does not work on real hardware. The system boots, and even some error windows appear on the X screen which indicates the video driver is working. But the messages say some files are missing. If to switch to console it becomes evident that a half of needed files are missing from the file system. Some basic commands do not work, for example, rpm --help says that the rpm library has "invalid ELF format". The same message occurs when trying to execute some other commands. I thought this could happen due to damaged media, but I verified the content. I also tried on two different computers. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 1

[opensuse] Re: [opensuse-factory] Re: [opensuse-multimedia] multimedia:apps coriander links to DISCONTINUED:openSUSE:11.1 coriander
by Roger Oberholtzer 14 Apr '11

14 Apr '11

On Thu, 2011-04-14 at 09:50 +0200, Dave Plater wrote: > On 04/14/2011 08:18 AM, Takashi Iwai wrote: > > At Mon, 11 Apr 2011 15:02:42 +0200, > > Dave Plater wrote: > >> > >> I just had a submit request to multimedia:apps coriander which had a > >> broken link to "DISCONTINUED:openSUSE:11.1 coriander", the > >> submitters package was also linked to "DISCONTINUED:openSUSE:11.1 > >> coriander". I deleted mmaps coriander and used osc copypac from the > >> submitters home project to recreate mmapps coriander and because it > >> was there before, recreated the mmapps link. > >> > >> Can somebody enlighten me as to why coriander is linked to > >> DISCONTINUED:openSUSE:11.1? > > > > IIRC, coriander package was on 11.1 distro but removed after that. > > > > > > Takashi > > It seems like a useful package and still maintained upstream and somebody's taken the time to update it. I'll delete the link the link to > DISCONTINUED, it caused broken spec files. Has coriander really been updated to the new IEEE1394 interface? When openSUSE dropped the older dc_control library, I would have guessed that coriander was no longer going to work. Perhaps the coriander team have now updated the application. I have to do the same for our own application. It is the only thing that keeps our primary app off 11.4. But we know we need to change the code. Yours sincerely, Roger Oberholtzer OPQ Systems / Ramböll RST Office: Int +46 10-615 60 20 Mobile: Int +46 70-815 1696 roger.oberholtzer(a)ramboll.se ________________________________________ Ramböll Sverige AB Krukmakargatan 21 P.O. Box 17009 SE-104 62 Stockholm, Sweden www.rambollrst.se -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 2

[opensuse] A warning message, no suggestion
by Stan Goodman 14 Apr '11

14 Apr '11

I have the following unusual error message from my v11.4 system: ----- > kwrite xyz kwrite(16691)/kdeui (kdelibs) KXMLGUIClient::~KXMLGUIClient: 0x824eb0 deleted without having been removed from the factory first. This will leak standalone popupmenus and could lead to crashes. kwrite(16691)/kdeui (kdelibs) KXMLGUIClient::~KXMLGUIClient: 0x813888 deleted without having been removed from the factory first. This will leak standalone popupmenus and could lead to crashes. > ----- I have never seen an error like this. Clearly, it contains lots of information, but I haven't been able to find an interpretation that will help me to correct the problem. Has someone a clue? -- Stan Goodman Qiryat Tiv'on Israel -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] file patching
by Peter Nikolic 14 Apr '11

14 Apr '11

Hi script wizards i am attempting to get the saa7231 driver compiled and have been bitten by a few glitches one was the move of autoconf.h sorted that one but now the next one is a lot more involved the error i get is as follows /home/pete/Downloads/saa7231-c6048b34be66/v4l/tea5767.c: In function 'tea5767_release': /home/pete/Downloads/saa7231-c6048b34be66/v4l/tea5767.c:441:2: error: implicit declaration of function 'kfree' /home/pete/Downloads/saa7231-c6048b34be66/v4l/tea5767.c: In function 'tea5767_attach': /home/pete/Downloads/saa7231-c6048b34be66/v4l/tea5767.c:493:2: error: implicit declaration of function 'kzalloc' /home/pete/Downloads/saa7231-c6048b34be66/v4l/tea5767.c:493:7: warning: assignment makes pointer from integer without a cast now reading around the net it seems there is a need for #include <linux/slab.h> in each file effeted and it is a lot of them is there an easy way of doing the addidition rather than opening each file and editing by hand ( as i am doing right now but the rtae it is going i will still be hacking this tike next year Pete . -- Powered by openSUSE 11.3 (x86_64) Kernel: 2.6.34.7-0.7-desktop KDE Development Platform: 4.5.5 (KDE 4.5.5) "release 1" 21:15 up 1 day 2:12, 5 users, load average: 0.31, 0.24, 0.19 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 2