November 2009 - openSUSE Users - openSUSE Mailing Lists

Re: [opensuse] Problems with phpMyAdmin
by Sascha 'saigkill' Manns 13 Nov '09

13 Nov '09

Hello Chuck, Am Freitag 13 November 2009 14:58:38 you wrote: > Are you getting a 403, that would mean apache not set up for > index.php. If that's not the error, in the conf did you make sure you > put the correct url you are accessing? phpMyAdmin is very straight > forward. The apache runs perfectly. If i go to: http://localhost/phpMyAdmin i'm getting the Start (Login) Page from phpMyAdmin. Very strange... -- Sincerely yours Sascha Manns openSUSE Member openSUSE Ambassador openSUSE Marketing Team openSUSE Build Service Web: http://saschamanns.gulli.to Blog: http://saigkill.wordpress.com ClaimID: http://claimid.com/saigkill -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] 11.2 installation errors
by Teruel de Campo MD 13 Nov '09

13 Nov '09

The new release is excellent so my thanks to all the devels!! I have encounter few glitches: 1. There is a problem with the DNS resolution. I noticed it first with RC1. I did a bug report, the devels know where the problem is and I am sure it will be solved over the next few months. (Bug 549447 - unscd does not share resolver options across sub-processes, causing DNS hangs when single-request is needed) I mentioned here because I have seen few threads where this may be the cause: 1.1 able to ping unable to use firefox or access the repositories 1.2 slow connections like long time to load a web page 1.3 erratic connection: sometimes you can connect sometimes you can not 1.4 hard or impossible to do a net installation. The temporary solution is just add the dns servers from your ISP or even public dns. 2. When I do the fist installation everything goes OK then I get to the login screen I enter the user name and it is not recognized. I enter root and the user has not been created so I add the user and everything is OK. I have not been able to ping point the problem that's why I have not reported to bugzilla. It has happened with RC2 and happened few minutes ago installing 11.2. I wonder if that is related to #1 because during the initial installation I am not connected. The installation was from the DVD so it should have been OK. Any body has seen this problem. 3. The fonts are kind of mess up. The desktop looks ok but when I opened yast for example there fonts a huge. Is this related that I have not downloaded all the fonts? I will fix it using the configuration desktop but it should not be like that. Well minor things for a great release. -=terry=- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] OS 11.2: NET installation stalled
by JC Francois 13 Nov '09

13 Nov '09

Hi, I just tried a network installation of OpenSuse 11.2 in a VirtualBox. Everything went as expected except extremely slow (even though I have a 5Mb connection). I had to let it run all night. This morning I tried to finish the setup but the process is now stalled in Configuration > Hostname. It is at the last step "Updating /etc/resolv.conf" at 100% but all buttons are disabled. The cursor is busy but nothing is happening. On the previous configuration screen I selected "Use DHCP" and un-selected update /etc/resolv.conf What can I do? Thanks, -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 3

[opensuse] openSUSE on User-mode Linux
by richard -rw- weinberger 13 Nov '09

13 Nov '09

Hi list! openSUSE 11.{1,2} seems unable to work as User-mode Linux guest. I'm using 2.6.31.6 vanilla as User-mode Kernel. Uml starts fine but no runlevel gets started. Getty appears immediately. The login fails too. To debug this issue i tried to use /bin/bash as init. /bin/bash crashes immediately within Uml: I can reproduce it.(tested on Centos 5 and openSUSE 11.{0, 2}). The same Uml kernel works fine with Centos 5 and Fedora as guest system. Logfile is attached. Any ideas? Thanks, //richard ---cut--- rw@chipmunk:~/uml112> ./linux ubda=root.ext3 init=/bin/bash Locating the bottom of the address space ... 0x10000 Locating the top of the address space ... 0xc0000000 Core dump limits : soft - 0 hard - NONE Checking that ptrace can change system call numbers...OK Checking syscall emulation patch for ptrace...OK Checking advanced syscall emulation patch for ptrace...OK Checking for tmpfs mount on /dev/shm...nothing mounted on /dev/shm Checking PROT_EXEC mmap in /tmp/...OK Checking for the skas3 patch in the host: - /proc/mm...not found: No such file or directory - PTRACE_FAULTINFO...not found - PTRACE_LDT...not found UML running in SKAS0 mode [ 0.000000] Linux version 2.6.31.6 (rw@raccoon) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 Thu Nov 12 18:07:17 CET 2009 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 [ 0.000000] Kernel command line: ubda=root.ext3 init=/bin/bash root=98:0 [ 0.000000] PID hash table entries: 128 (order: 7, 512 bytes) [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Memory: 26496k available [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:15 [ 0.000000] Calibrating delay loop... 1893.99 BogoMIPS (lpj=9469952) [ 0.280000] Security Framework initialized [ 0.280000] SELinux: Initializing. [ 0.280000] Mount-cache hash table entries: 512 [ 0.280000] Checking for host processor cmov support...Yes [ 0.280000] Checking that host ptys support output SIGIO...Yes [ 0.280000] Checking that host ptys support SIGIO on close...No, enabling workaround [ 0.280000] Using 2.6 host AIO [ 0.280000] NET: Registered protocol family 16 [ 0.280000] bio: create slab <bio-0> at 0 [ 0.280000] NetLabel: Initializing [ 0.280000] NetLabel: domain hash size = 128 [ 0.280000] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.280000] NetLabel: unlabeled traffic allowed by default [ 0.280000] Slow work thread pool: Starting up [ 0.280000] Slow work thread pool: Ready [ 0.280000] FS-Cache: Loaded [ 0.280000] CacheFiles: Loaded [ 0.280000] NET: Registered protocol family 2 [ 0.280000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.280000] TCP established hash table entries: 1024 (order: 1, 8192 bytes) [ 0.280000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.280000] TCP: Hash tables configured (established 1024 bind 1024) [ 0.280000] TCP reno registered [ 0.280000] NET: Registered protocol family 1 [ 0.280000] IRQ 9/mconsole: IRQF_DISABLED is not guaranteed on shared IRQs [ 0.280000] mconsole (version 2) initialized on /home/rw/.uml/PedQ7c/mconsole [ 0.280000] Checking host MADV_REMOVE support... [ 0.280000] MADV_REMOVE failed, err = -38 [ 0.280000] Can't release memory to the host - memory hotplug won't be supported [ 0.280000] ubd: Synchronous mode [ 0.280000] UML Watchdog Timer [ 0.280000] Host TLS support detected [ 0.280000] Detected host type: i386 (GDT indexes 6 to 9) [ 0.280000] audit: initializing netlink socket (disabled) [ 0.280000] type=2000 audit(1258048878.039:1): initialized [ 0.290000] VFS: Disk quotas dquot_6.5.2 [ 0.290000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.290000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.290000] FS-Cache: Netfs 'nfs' registered for caching [ 0.290000] NTFS driver 2.1.29 [Flags: R/W]. [ 0.290000] fuse init (API version 7.12) [ 0.290000] Btrfs loaded [ 0.290000] GFS2 (built Nov 12 2009 18:06:26) installed [ 0.290000] msgmni has been set to 51 [ 0.290000] alg: No test for fcrypt (fcrypt-generic) [ 0.290000] alg: No test for stdrng (krng) [ 0.290000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 0.290000] io scheduler noop registered [ 0.290000] io scheduler anticipatory registered [ 0.290000] io scheduler deadline registered [ 0.290000] io scheduler cfq registered (default) [ 0.380000] brd: module loaded [ 0.380000] loop: module loaded [ 0.380000] nbd: registered device at major 43 [ 0.380000] PPP generic driver version 2.4.2 [ 0.380000] PPP Deflate Compression module registered [ 0.380000] PPP BSD Compression module registered [ 0.380000] PPP MPPE Compression module registered [ 0.380000] NET: Registered protocol family 24 [ 0.380000] PPPoL2TP kernel driver, V1.0 [ 0.380000] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). [ 0.380000] CSLIP: code copyright 1989 Regents of the University of California. [ 0.380000] SLIP linefill/keepalive option. [ 0.380000] SoftDog: cannot register miscdev on minor=130 (err=-16) [ 0.380000] Netfilter messages via NETLINK v0.30. [ 0.380000] nf_conntrack version 0.5.0 (414 buckets, 1656 max) [ 0.380000] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 0.380000] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 0.380000] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 0.380000] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 [ 0.380000] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. [ 0.380000] xt_time: kernel timezone is -0000 [ 0.380000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.380000] ClusterIP Version 0.8 loaded successfully [ 0.380000] arp_tables: (C) 2002 David S. Miller [ 0.380000] TCP cubic registered [ 0.380000] NET: Registered protocol family 10 [ 0.380000] lo: Disabled Privacy Extensions [ 0.390000] Mobile IPv6 [ 0.390000] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 0.390000] IPv6 over IPv4 tunneling driver [ 0.390000] sit0: Disabled Privacy Extensions [ 0.390000] ip6tnl0: Disabled Privacy Extensions [ 0.390000] NET: Registered protocol family 17 [ 0.390000] Bridge firewalling registered [ 0.390000] Ebtables v2.0 registered [ 0.390000] ebt_ulog: out of memory trying to call netlink_kernel_create [ 0.390000] RPC: Registered udp transport module. [ 0.390000] RPC: Registered tcp transport module. [ 0.390000] lib80211: common routines for IEEE802.11 drivers [ 0.390000] Initialized stdio console driver [ 0.390000] Console initialized on /dev/tty0 [ 0.390000] console [tty0] enabled [ 0.390000] Initializing software serial port version 1 [ 0.420000] console [mc-1] enabled [ 0.420000] ubda: unknown partition table [ 0.420000] kjournald starting. Commit interval 5 seconds [ 0.420000] EXT3-fs: mounted filesystem with writeback data mode. [ 0.420000] VFS: Mounted root (ext3 filesystem) readonly on device 98:0. [ 0.420000] Warning: unable to open an initial console. [ 0.420000] Kernel panic - not syncing: Attempted to kill init! [ 0.420000] 09c63e8c: [<084197dd>] dump_stack+0x1c/0x20 [ 0.420000] 09c63ea4: [<08419817>] panic+0x36/0xcd [ 0.420000] 09c63ed0: [<0807c9a1>] do_exit+0x63/0x516 [ 0.420000] 09c63f08: [<0807ceb1>] do_group_exit+0x5d/0x89 [ 0.420000] 09c63f24: [<0807cef1>] sys_exit_group+0x14/0x18 [ 0.420000] 09c63f30: [<08061872>] handle_syscall+0x7a/0x98 [ 0.420000] 09c63f80: [<0806f2b5>] userspace+0x2c9/0x370 [ 0.420000] 09c63fe8: [<0805f670>] new_thread_handler+0x7b/0x87 [ 0.420000] 09c63ffc: [<00000000>] 0x0 [ 0.420000] [ 0.420000] [ 0.420000] EIP: 0073:[<ffffe430>] CPU: 0 Not tainted ESP: 007b:bfa3d58c EFLAGS: 00000246 [ 0.420000] Not tainted [ 0.420000] EAX: ffffffda EBX: 00000000 ECX: 00000000 EDX: 00000000 [ 0.420000] ESI: 401bf264 EDI: 00000000 EBP: 401bf264 DS: 007b ES: 007b [ 0.420000] 09c63e20: [<08071b4f>] show_regs+0xc4/0xc9 [ 0.420000] 09c63e4c: [<0806140a>] panic_exit+0x25/0x3b [ 0.420000] 09c63e60: [<0808cfd7>] notifier_call_chain+0x27/0x4c [ 0.420000] 09c63e88: [<0808d02a>] atomic_notifier_call_chain+0x15/0x17 [ 0.420000] 09c63e98: [<08419828>] panic+0x47/0xcd [ 0.420000] 09c63ed0: [<0807c9a1>] do_exit+0x63/0x516 [ 0.420000] 09c63f08: [<0807ceb1>] do_group_exit+0x5d/0x89 [ 0.420000] 09c63f24: [<0807cef1>] sys_exit_group+0x14/0x18 [ 0.420000] 09c63f30: [<08061872>] handle_syscall+0x7a/0x98 [ 0.420000] 09c63f80: [<0806f2b5>] userspace+0x2c9/0x370 [ 0.420000] 09c63fe8: [<0805f670>] new_thread_handler+0x7b/0x87 [ 0.420000] 09c63ffc: [<00000000>] 0x0 [ 0.420000] Speicherzugriffsfehler rw@chipmunk:~/uml112> ---cut--- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 1

Re: [opensuse] After testing 11.2.........
by Fred A. Miller 13 Nov '09

13 Nov '09

On 11/11/2009 06:25 AM, Adam Tauno Williams wrote: > On Wed, 2009-11-11 at 23:55 -0500, Fred A. Miller wrote: > >> 11.2 on 2 test boxen, one a Dell laptop with Intel duel-core Centrino >> and 2G RAM and an HP desktop with a dual-core Opteron and 4G of RAM, are >> FASTER running with openSUSE 11.2 and KDE than Ubuntu 9.10. >> > How did you measure that? > > >> Yast has even more ability than in 11.1. >> Anyone who's used Yast is hard pressed to want to leave it. ;) >> > Agree; YaST is a big part of why I can't really consider switching > distros. > > Our testing of openSUSE 11.2 have been very positive as well. > > >> I have an idea that 11.2 will be the distro. all others are measured by. >> > Ubuntu fanboys will never be convinced. :) > Some Linux users are like liberals.......liberals only consider the truth...facts...when it serves their own agenda! Fred -- A REVOLUTIONARY IDEA! 'Time to put Nana Pelosi in a home!' -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 5

[opensuse] The problem with wi-fi on notebook asus ux30
by Дмитрий Сподарец 13 Nov '09

13 Nov '09

Hi all. On my notebook asus ux30 not working wi-fi card ( installed opensuse 11.2 /sbin/lspci: 02:00.0 Network controller: RaLink RT3091 Wireless 802.11n 1T/2R PCIe /usr/sbin/hwinfo : 71: None 00.0: 10701 Ethernet [Created at net.124] Unique ID: fLK9.ndpeucax6V1 SysFS ID: /class/net/pan0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "bridge" Device File: pan0rt2860sta HW Address: aa:fb:7b:7f:42:12 Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown sudo /usr/sbin/iwconfig lo no wireless extensions. eth0 no wireless extensions. pan0 no wireless extensions. lsmod | grep rt2860sta rt2860sta 717456 0 /sbin/ifconfig: eth0 Link encap:Ethernet HWaddr 00:26:18:AC:CD:6D inet addr:192.168.1.5 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::226:18ff:feac:cd6d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13958 errors:0 dropped:0 overruns:0 frame:0 TX packets:12038 errors:0 dropped:0 overruns:0 carrier:1 collisions:0 txqueuelen:1000 RX bytes:11848800 (11.2 Mb) TX bytes:1996254 (1.9 Mb) Interrupt:29 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:88 errors:0 dropped:0 overruns:0 frame:0 TX packets:88 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:5544 (5.4 Kb) TX bytes:5544 (5.4 Kb) latest drivers installed. http://www.ralinktech.com/support.php?s=2 Who can help with the problem? ------------- Dmitry Spodarets -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] zupper dup from 11.1 to 11.2
by Roger Oberholtzer 13 Nov '09

13 Nov '09

I am considering doing an upgrade of my 11.1 system to an 11.2 system with zypper dup. I have these questions: 1) Are there any assumptions about what is installed on 11.1? I have moved some things to use more recent things, like a newer evolution, or KDE. They are from the OBS. I think they are probably the same as will be in 11.2. I know these repos will be removed as part of the update. 2) Is it possible to get a listing of what would be done, without it actually happening? I do not know what I expect to see in the listing, but maybe something will make me a little more confident about doing the update. 3) Should I be able to turn on the flag to tell that all things should be downloaded first, then changes to the system can happen? If so, how do I enable that flag? -- Roger Oberholtzer OPQ Systems / Ramböll RST Ramböll Sverige AB Krukmakargatan 21 P.O. Box 17009 SE-104 62 Stockholm, Sweden Office: Int +46 10-615 60 20 Mobile: Int +46 70-815 1696 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

6 13

[opensuse] Now that the release is officially announced, where can the new 11.2 release be downloaded?
by Stan Goodman 13 Nov '09

13 Nov '09

Searching for it on the 'Net still shows only RC2 and Factory. Where can I get the new general release from Novell or reliable mirrors? Naively, I thought the count-down page would offer a clue. -- Stan Goodman Qiryat Tiv'on Israel -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 3

[opensuse] For pre-compiled nVidia drivers, go here.
by Fred A. Miller 13 Nov '09

13 Nov '09

http://en.opensuse.org/New_NVIDIA_cards -- A REVOLUTIONARY IDEA! 'Time to put Nana Pelosi in a home!' -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] nvidia kernel module fails to build
by Hugo Garcia 13 Nov '09

13 Nov '09

Hi Suse 11.2. I didn't have any problem in 11.2.R1 or R2 in building. Now the build fails. Anybody with the same experience? <snip> /usr/src/linux-2.6.31.5-0.1/include/linux/highmem.h:154: warning: pointer of type ‘void *’ used in arithmetic /tmp/selfgz5597/NVIDIA-Linux-x86-185.18.14-pkg1/usr/src/nv/os-agp.c: In func tion ‘KernLoadAGPPages’: /tmp/selfgz5597/NVIDIA-Linux-x86-185.18.14-pkg1/usr/src/nv/os-agp.c:296: err or: ‘agp_memory’ has no member named ‘memory’ make[4]: *** [/tmp/selfgz5597/NVIDIA-Linux-x86-185.18.14-pkg1/usr/src/nv/os- agp.o] Error 1 make[3]: *** [_module_/tmp/selfgz5597/NVIDIA-Linux-x86-185.18.14-pkg1/usr/sr c/nv] Error 2 make[2]: *** [sub-make] Error 2 NVIDIA: left KBUILD. nvidia.ko failed to build! make[1]: *** [module] Error 1 make: *** [module] Error 2 -> Error. ERROR: Unable to build the NVIDIA kernel module. ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details. You may find suggestions on fixing installation problems in the README available on the Linux driver download page at www.nvidia.com. </snip> -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 1