November 2009 - openSUSE Users - openSUSE Mailing Lists

[opensuse] No sound with 82801G ICH7 High Definition Audio On-Board Intel Sound Card
by Daniel Antonio Peraza Cedrez 24 Nov '09

24 Nov '09

Hi there!. I've just installed openSUSE 11.2 but I can't get any sound output. My hwinfo --sound looks like: linux-5xhd:/home/daniel # hwinfo --sound 12: PCI 1b.0: 0403 Audio device [Created at pci.318] UDI: /org/freedesktop/Hal/devices/pci_8086_27d8 Unique ID: u1Nb.ARy7XZavRKE SysFS ID: /devices/pci0000:00/0000:00:1b.0 SysFS BusID: 0000:00:1b.0 Hardware Class: sound Model: "Intel 82801G (ICH7 Family) High Definition Audio Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27d8 "82801G (ICH7 Family) High Definition Audio Controller" SubVendor: pci 0x1565 "Biostar Microtech Int'l Corp" SubDevice: pci 0x820d Revision: 0x01 Memory Range: 0xfdff8000-0xfdffbfff (rw,non-prefetchable) IRQ: 10 (no events) Module Alias: "pci:v00008086d000027D8sv00001565sd0000820Dbc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is not active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=no, avail=yes, need=no, active=unknown The lsmod output is: linux-5xhd:/home/daniel # lsmod Module Size Used by joydev 11232 0 af_packet 23424 0 i915 248968 1 drm 184896 2 i915 i2c_algo_bit 6884 1 i915 video 24600 1 i915 bridge 63476 1 stp 2532 1 bridge llc 7020 2 bridge,stp cpufreq_conservative 8396 0 cpufreq_userspace 3332 0 cpufreq_powersave 1568 0 acpi_cpufreq 9452 0 speedstep_lib 5092 0 fuse 74268 3 nls_iso8859_1 4000 1 nls_cp437 5664 1 vfat 12544 1 fat 58400 1 vfat loop 17228 0 dm_mod 84804 0 epl 171660 0 8139too 34372 0 ppdev 10276 0 sg 32884 0 pcspkr 2784 0 8139cp 25408 0 parport_pc 40356 0 i2c_i801 12788 0 parport 39948 2 ppdev,parport_pc floppy 61220 0 iTCO_wdt 12164 0 iTCO_vendor_support 3876 1 iTCO_wdt sr_mod 17572 0 cdrom 40768 1 sr_mod button 6608 0 intel_agp 31012 1 edd 10472 0 fan 5028 0 processor 50576 1 acpi_cpufreq ide_pci_generic 4036 0 piix 6760 0 ide_core 122572 2 ide_pci_generic,piix ata_generic 4836 0 thermal 21084 0 thermal_sys 18344 4 video,fan,processor,thermal The /etc/modprobe.d/ directory looks like this: linux-5xhd:/etc/modprobe.d # ls 00-system.conf 50-blacklist.conf~ 50-ipv6.conf 50-prism54.conf 50-thinkpad_acpi.conf module-renames 10-unsupported-modules.conf 50-blacklist.conf.rpmorig 50-ipw2200.conf 50-sound.conf 50-tv.conf sound.YaST2save 50-blacklist.conf 50-bluetooth.conf 50-nvidia.conf 50-sound.conf~ 99-local.conf xen_loop.conf Somebody told me to try to blacklist the ac97_bus driver, so I added it to the 50-blacklist.conf file: # OSS PCI sound modules blacklist ac97_bus blacklist ad1889 blacklist ali5455 blacklist btaudio blacklist cmpci blacklist cs4281 blacklist emu10k1 blacklist es1370 blacklist es1371 blacklist esssolo1 blacklist forte blacklist i810_audio blacklist maestro blacklist maestro3 blacklist nm256_audio blacklist opl3sa2 # Bug 219758 blacklist rme96xx blacklist sonicvibes blacklist trident blacklist via82cxxx_audio blacklist ymfpci The list goes on ... alsaconf is unable to fix the problem. And when trying to configure the sound card through YaST I got the following error: "The kernel module snd-hda-intel for sound support can not be loaded. This may be caused by incorrect module parameters, or even invalid IRQ or I/O." (It may be not as exactly as it should, I'm a spanish speaker guy just translating the message ;-) Please could somebody help me to fix this problem? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 11

[opensuse] Help with mail server Certs - Again
by Jim Flanagan 24 Nov '09

24 Nov '09

Hi all, Wow, the lists sure are slow these days. I set up my new email server over the weekend, and have plain text logins working fine. I need to set up my certs to allow TLS/SSL for internet email access. I've had problems doing this in the past and could use some consice guidance with this. What I 'd like to do is issue a self signed cert for imap and smtp. I suppose I could just issue a cert, but would rather it be signed. Here is what I tried over the weekend with no success, I keep getting timed out accessing via Thunderbird (on the local machine). $>mkdir /etc/postfix/ssl $>cd cd /etc/postfix/ssl/ $>openssl genrsa -des3 -rand /etc/hosts -out smtpd.key 1024 $>chmod 600 smtpd.key $>openssl req -new -key smtpd.key -out smtpd.csr $>openssl x509 -req -days 3650 -in smtpd.csr -signkey smtpd.key -out smtpd.crt $>openssl rsa -in smtpd.key -out smtpd.key.unencrypted $>mv -f smtpd.key.unencrypted smtpd.key $>openssl req -new -x509 -extensions v3_ca -keyout cakey.pem -out cacert.pem -days 3650 Any help most welcome. Thanks, Jim -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 2

[opensuse] eth0 and eth1 renamed
by Leen de Braal 24 Nov '09

24 Nov '09

Hi all, Need help with new installed system (11.1). Yesterday after the install I updated system with you, and after that (it seems) I am having trouble with networking. This morning reports came, that there was no Internet, and after a reboot I ended up with only one network card. Config is like this: - 8169 on mobo (Gbit) for internal 192.168.0.254 fixed address, eth0 - 8139 PCI (10/100) for Internet on dhcp, eth1 This morning when I looked in the system I could see them both with ifconfig, but the internal network was not pingable. After a reboot I can only see eth1, and in dmesg I found this: eth0 renamed to eth1 by udevd Now with ifconfig I do no longer see eth0. Ran yast, there are still 2 networkdevices in the config, but eth0 shows no MAC-address. Letting yast reconfigure and start the network does not help. How can I get eth0 back to life? It is quite urgent, there is also mail flowing in and out of this machine. -- L. de Braal BraHa Systems NL - Terneuzen T +31 115 649333 F +31 115 649444 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 5

[opensuse] Failure to ssh into 11.2 machine using key authentication only
by Rafael E. Herrera 24 Nov '09

24 Nov '09

Hello, I just updated my desktop to 11.2 and encountered a problem with the SSHD daemon. A remote system ssh's into my desktop using a passwordless dsa key. This setup has worked for me up until now. After the upgrade, the connection is terminated by my ssh server. The following is the daemon log on my desktop: Nov 24 14:12:43 mydesktop sshd[30152]: debug1: rexec start in 5 out 5 newsock 5 pipe 7 sock 8 Nov 24 14:12:43 mydesktop sshd[30061]: debug1: Forked child 30152. Nov 24 14:12:43 mydesktop sshd[30152]: debug1: inetd sockets after dupping: 3, 3 Nov 24 14:12:43 mydesktop sshd[30152]: Connection from 150.232.137.238 port 7152 Nov 24 14:12:43 mydesktop sshd[30152]: debug1: Client protocol version 2.0; client software version OpenSSH_4.2 Nov 24 14:12:43 mydesktop sshd[30152]: debug1: match: OpenSSH_4.2 pat OpenSSH_4* Nov 24 14:12:43 mydesktop sshd[30152]: debug1: Enabling compatibility mode for protocol 2.0 Nov 24 14:12:43 mydesktop sshd[30152]: debug1: Local version string SSH-2.0-OpenSSH_5.2 Nov 24 14:12:43 mydesktop sshd[30152]: debug1: PAM: initializing for "user" Nov 24 14:12:43 mydesktop sshd[30152]: debug1: PAM: setting PAM_RHOST to "nntau" Nov 24 14:12:43 mydesktop sshd[30152]: debug1: PAM: setting PAM_TTY to "ssh" Nov 24 14:12:43 mydesktop sshd[30152]: debug1: temporarily_use_uid: 3008/3001 (e=0/0) Nov 24 14:12:43 mydesktop sshd[30152]: debug1: trying public key file /usr2/users/.ssh/authorized_keys Nov 24 14:12:43 mydesktop sshd[30152]: debug1: fd 4 clearing O_NONBLOCK Nov 24 14:12:43 mydesktop sshd[30152]: debug1: restore_uid: 0/0 Nov 24 14:12:43 mydesktop sshd[30152]: debug1: temporarily_use_uid: 3008/3001 (e=0/0) Nov 24 14:12:43 mydesktop sshd[30152]: debug1: trying public key file /usr2/users/user/.ssh/authorized_keys2 Nov 24 14:12:43 mydesktop sshd[30152]: debug1: restore_uid: 0/0 Nov 24 14:12:43 mydesktop sshd[30152]: Failed publickey for user from 150.232.137.238 port 7152 ssh2 Nov 24 14:12:43 mydesktop sshd[30152]: debug1: temporarily_use_uid: 3008/3001 (e=0/0) Nov 24 14:12:43 mydesktop sshd[30152]: debug1: trying public key file /usr2/users/user/.ssh/authorized_keys Nov 24 14:12:43 mydesktop sshd[30152]: debug1: fd 4 clearing O_NONBLOCK Nov 24 14:12:43 mydesktop sshd[30152]: debug1: matching key found: file /usr2/users/user/.ssh/authorized_keys, line 3 Nov 24 14:12:43 mydesktop sshd[30152]: Found matching DSA key: a3:ad:6d:b7:5e:12:73:2a:bd:40:1f:16:7c:26:6e:8f Nov 24 14:12:43 mydesktop sshd[30152]: debug1: restore_uid: 0/0 Nov 24 14:12:43 mydesktop sshd[30152]: debug1: ssh_dss_verify: signature correct Nov 24 14:12:43 mydesktop sshd[30152]: debug1: do_pam_account: called Nov 24 14:12:43 mydesktop sshd[30152]: Failed publickey for user from 150.232.137.238 port 7152 ssh2 Nov 24 14:12:43 mydesktop sshd[30152]: debug1: do_cleanup Nov 24 14:12:43 mydesktop sshd[30152]: debug1: PAM: cleanup What is different in SSH now that broke my configuration? Thanks. -- Rafael -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] "Plasma Desktop Shell"
by Stan Goodman 24 Nov '09

24 Nov '09

After installing v11.2 with KDE4, I removed the Plasma Desktop Shell from the desktop, by way of experimentation; I do not remember if the context menu said "Remove", "Delete", "Hide" or something else). Now I do not find a way to restore it. That leaves me without the icons that were in it, to say nothing of whatever advantages I might derive from this feature. At the left end of the Panel, next to the chameleon K-menu, I find a widget labeled "Show the Plasma Dashboard", which I assume means the Plasma Desktop Shell. Clicking on it does not restore what I am seeking, but instead raises a tab called "Widget Dashboard", clicking on which does nothing that I can detect. This is my first experience with KDE4, and I am lost among the richness of terminology devoted to what seems to be a single feature. Can someone tell me how to get back the plasma gizmo(s) that I have misplaced? -- Stan Goodman Qiryat Tiv'on Israel -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 2

[opensuse] installing yum for installing cpanel-->"...was not able to locate the glibc package.."
by Ricky Tompu Breaky 24 Nov '09

24 Nov '09

Dear my friends... I want to install cpanel on my OpenSuSE 11.1. What I've done is: 1. Because the cpanel works with "yum" or "apt-get", so I chose yum and install it: 1.1. I found the repository with webpin. 1.2. put them into yast repository 1.3. and install the yum with yast. 2. I did: "cd /srv/www/htdocs/cpanel". 3. I did: " wget http://layer1.cpanel.net/latest ". 4. I did: " sh latest ". 5. And I am stucked on this: " sussy:/srv/www/htdocs/cpanel # sh latest Creating directory installd Verifying archive integrity... All good. Uncompressing cplyr1-cPanel............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................ ____ _ ___| _ \ __ _ _ __ ___| | / __| |_) / _` | '_ \ / _ \ | | (__| __/ (_| | | | | __/ | \___|_| \__,_|_| |_|\___|_| Installer Version 11.5.1 Beginning main installation. Your operating system's rpm update method (yum) was not able to locate the glibc package. This is an indication of an improper setup. You must correct this error before you can proceed. sussy:/srv/www/htdocs/cpanel # ". Anybody has ever the same problem? Please tell me what I should do to make my "yum" and "cpanel installer" can locate my glibc. Thank you very much in advance. === I also did so: " sussy:/srv/www/htdocs/cpanel # yum glibc /usr/lib/yum-plugins/merge-conf.py:22: DeprecationWarning: the md5 module is deprecated; use hashlib instead import os, sys, md5 Loaded plugins: aliases, allowdowngrade, basearchonly, changelog, fastestmirror, : filter-data, list-data, merge-conf, priorities, protect- : packages, protectbase, refresh-updatesd, skip-broken, tmprepo, : tsflags, upgrade-helper, verify Traceback (most recent call last): File "/usr/bin/yum", line 29, in <module> yummain.user_main(sys.argv[1:], exit_code=True) File "yummain.py", line 229, in user_main errcode = main(args) File "yummain.py", line 84, in main base.getOptionsConfig(args) File "cli.py", line 184, in getOptionsConfig enabled_plugins=self.optparser._splitArg(opts.enableplugins)) File "/usr/lib/python2.6/site-packages/yum/__init__.py", line 190, in _getConfig startupconf.pluginconfpath,disabled_plugins,enabled_plugins) File "/usr/lib/python2.6/site-packages/yum/__init__.py", line 356, in doPluginSetup plugin_types, confpath, disabled_plugins, enabled_plugins) File "/usr/lib/python2.6/site-packages/yum/plugins.py", line 162, in __init__ self.run('config') File "/usr/lib/python2.6/site-packages/yum/plugins.py", line 178, in run func(conduitcls(self, self.base, conf, **kwargs)) File "/usr/lib/yum-plugins/skip-broken.py", line 110, in config_hook help="skip packages with broken dependencies") File "/usr/lib/python2.6/optparse.py", line 1014, in add_option self._check_conflict(option) File "/usr/lib/python2.6/optparse.py", line 989, in _check_conflict option) optparse.OptionConflictError: option --skip-broken: conflicting option string(s): --skip-broken sussy:/srv/www/htdocs/cpanel # ". -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] 11.2 - Yesterdays updates in XGL broke compiz settings manager (locale.Error)
by David C. Rankin 24 Nov '09

24 Nov '09

Listmates, Compiz 8.4 works great, but the build for the settings manager seems broken after yesterdays update. The compizconfig-settings-manager will not start anymore, giving the error: 15:57 alchemy:~> compizconfig-settings-manager (process:10221): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. Traceback (most recent call last): File "/usr/bin/compizconfig-settings-manager", line 101, in <module> import ccm File "/usr/lib/python2.6/site-packages/ccm/__init__.py", line 1, in <module> from ccm.Conflicts import * File "/usr/lib/python2.6/site-packages/ccm/Conflicts.py", line 27, in <module> from ccm.Constants import * File "/usr/lib/python2.6/site-packages/ccm/Constants.py", line 88, in <module> locale.setlocale(locale.LC_ALL, "") File "/usr/lib64/python2.6/locale.py", line 513, in setlocale return _setlocale(category, locale) locale.Error: unsupported locale setting Worked fine before the update :-( -- David C. Rankin, J.D.,P.E. Rankin Law Firm, PLLC 510 Ochiltree Street Nacogdoches, Texas 75961 Telephone: (936) 715-9333 Facsimile: (936) 715-9339 www.rankinlawfirm.com -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] weird DNS problem
by Boris Epstein 24 Nov '09

24 Nov '09

Hi all, I've got an OpenSuSE 11.1 machine on which I get the followingfrom a WiFi network of largely unknown configuration: bepstein@cplvaio:~> host boston.com 127.0.0.1 Using domain server: Name: 127.0.0.1 Address: 127.0.0.1#53 Aliases: boston.com has address 66.151.183.41 Host boston.com not found: 2(SERVFAIL) ;; connection timed out; no servers could be reached bepstein@cplvaio:~> telnet boston.com 80 Trying 1.0.0.0... ^C bepstein@cplvaio:~> Can anybody make any sense of this? Why does it first correctly find the address (in this case boston.com = 66.151.183.41) only to then complain about something not being found? Why then upon attempting a telnet the attempt is made to connect to a bogus address (1.0.0.0) as opposed to a real one which would have worked: bepstein@cplvaio:~> telnet 66.151.183.41 80 Trying 66.151.183.41... Connected to 66.151.183.41. Escape character is '^]'. ^] telnet> q Connection closed. bepstein@cplvaio:~> Some background on the issue here: http://technonutsnbolts.blogspot.com/2007/08/web-pandering-to-mr-gates-or.h… Thanks. Boris. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Where to further adjust keyboard repeat rate in kde4, keyboard settings insufficient range
by David C. Rankin 24 Nov '09

24 Nov '09

Listmates, Where is the keyboard repeat rate variable stored for kde4? The system settings -> comp administration -> kbd & mouse -> keyboard settings only adjusts to a maximum of 25 which is completely at the bottom of the repeat rate scale. I need to find the actual variable so I can double, if not tripple, the rate. In Gnome you have full control over the keyboard repeat. Mearly setting the rate at 1/2 is enough to have your cursor set on fire racing across the screen. In kde4, even at its max setting, the cursor barely crawls cross the screen. Where is the actual rate setting kept? -- David C. Rankin, J.D.,P.E. Rankin Law Firm, PLLC 510 Ochiltree Street Nacogdoches, Texas 75961 Telephone: (936) 715-9333 Facsimile: (936) 715-9339 www.rankinlawfirm.com -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] wifi card drivers !?
by jp_listero 24 Nov '09

24 Nov '09

Hi, I'm using opensuse 11.2 on my toshiba satellite U505-S2075 ... I have a problem with my wifi card, a Realtek RT 8191 SE, yast doesnt show it. my lpsci out: linux-3fjk:~ # lspci ... 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8172 (rev 10) ... any ideas ? thanks! -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0