November 2009 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Re: can't mount removable media in 11.2
by Joachim Schrod 26 Nov '09

26 Nov '09

Istvan Gabor wrote: >> > "org.freedesktop.hal.storage.mount-removable no Still can not mount devices. >> >> Is "ck-list-sessions | grep active" true? > > # ck-list-sessions > Both command above gives an 'empty line answer', so I guess it is not on/true. > > What is ck-list-sessions? It lists the ConsoleKit sessions. ConsoleKit is a daemon that tracks which users are logged in at the console, and which of those sessions in active at the time. HAL uses information from the ConsoleKit and PolicyKit daemons to give users that are logged in at the console (i.e., not those logged in via ssh from remote) the right to access several devices. PolicyKit is the daemon that decides *which* devices are accessable. When you login via GNOME or KDE, your new session is registered automatically with the ConsoleKit daemon. If you use X with another window or session manager, you have to start your session with "ck-launch-session CMD". If you use tty login, you have to add session optional pam_ck_connector.so to /etc/pam.d/login. HTH, Joachim -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Joachim Schrod Email: jschrod(a)acm.org Roedermark, Germany -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] postfix: Name service error
by Otto Rodusek 26 Nov '09

26 Nov '09

Hi, I've recently set up a new OpenSuse11.1 server. I need a simple smtp request - mail out system errors to the sysadmin as/when necessary. I've configured postfix but no matter what I try I keep getting the following errors: (I've tried other email address - not just hotmail.com - with the same error result!!) Nov 26 15:49:42 bunyip postfix/error[2285]: 059CBC658B: to=<ottorodusek(a)hotmail.com>, relay=none, delay=71849, delays=71820/28/0/0.1, dsn=4.4.3, status=deferred (delivery temporarily suspended: Host or domain name not found. Name service error for name=hotmail.com type=MX: Host not found, try again) My server is ip address 192.168.19.1 , using an AZTECH ADSL2+ DSL600E(C) adsl/router (ip address 192.168.19.254). My resolv.conf is: search local.com nameserver 202.156.1.58 nameserver 218.186.1.38 nameserver 202.156.1.38 I have no problem whatsoever doing ping or even internet access to the outside world - just can't seem to send email from the server. The server is only being used for samba shares and is not an smtp gateway to the users - ONLY the server needs to send out mail. From the message it looks to be a DNS issue with postfix only as I have no problems accessing the outside world otherwise. I've set up similar previously without a hitch - just in this instance it doesn't work - can't seem to figure out what I did wrong!!!! Any help/insights would be most appreciated!!! Thanks. If it helps my postconf is: 2bounce_notice_recipient = postmaster access_map_reject_code = 554 address_verify_default_transport = $default_transport address_verify_local_transport = $local_transport address_verify_map = address_verify_negative_cache = yes address_verify_negative_expire_time = 3d address_verify_negative_refresh_time = 3h address_verify_poll_count = 3 address_verify_poll_delay = 3s address_verify_positive_expire_time = 31d address_verify_positive_refresh_time = 7d address_verify_relay_transport = $relay_transport address_verify_relayhost = $relayhost address_verify_sender = $double_bounce_sender address_verify_sender_dependent_relayhost_maps = $sender_dependent_relayhost_maps address_verify_service_name = verify address_verify_transport_maps = $transport_maps address_verify_virtual_transport = $virtual_transport alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases allow_mail_to_commands = alias, forward allow_mail_to_files = alias, forward allow_min_user = no allow_percent_hack = yes allow_untrusted_routing = no alternate_config_directories = always_bcc = anvil_rate_time_unit = 60s anvil_status_update_time = 600s append_at_myorigin = yes append_dot_mydomain = yes application_event_drain_time = 100s authorized_flush_users = static:anyone authorized_mailq_users = static:anyone authorized_submit_users = static:anyone backwards_bounce_logfile_compatibility = yes berkeley_db_create_buffer_size = 16777216 berkeley_db_read_buffer_size = 131072 best_mx_transport = biff = no body_checks = body_checks_size_limit = 51200 bounce_notice_recipient = postmaster bounce_queue_lifetime = 5d bounce_service_name = bounce bounce_size_limit = 50000 bounce_template_file = broken_sasl_auth_clients = no canonical_classes = envelope_sender, envelope_recipient, header_sender, header_recipient canonical_maps = hash:/etc/postfix/canonical cleanup_service_name = cleanup command_directory = /usr/sbin command_execution_directory = command_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ command_time_limit = 1000s config_directory = /etc/postfix connection_cache_protocol_timeout = 5s connection_cache_service_name = scache connection_cache_status_update_time = 600s connection_cache_ttl_limit = 2s content_filter = cyrus_sasl_config_path = daemon_directory = /usr/lib/postfix daemon_timeout = 18000s data_directory = /var/lib/postfix debug_peer_level = 5 debug_peer_list = default_database_type = hash default_delivery_slot_cost = 5 default_delivery_slot_discount = 50 default_delivery_slot_loan = 3 default_destination_concurrency_failed_cohort_limit = 1 default_destination_concurrency_limit = 20 default_destination_concurrency_negative_feedback = 1 default_destination_concurrency_positive_feedback = 1 default_destination_rate_delay = 0s default_destination_recipient_limit = 50 default_extra_recipient_limit = 1000 default_minimum_delivery_slots = 3 default_privs = nobody default_process_limit = 100 default_rbl_reply = $rbl_code Service unavailable; $rbl_class [$rbl_what] blocked using $rbl_domain${rbl_reason?; $rbl_reason} default_recipient_limit = 20000 default_recipient_refill_delay = 5s default_recipient_refill_limit = 100 default_transport = smtp default_verp_delimiters = += defer_code = 450 defer_service_name = defer defer_transports = delay_logging_resolution_limit = 2 delay_notice_recipient = postmaster delay_warning_time = 1h deliver_lock_attempts = 20 deliver_lock_delay = 1s destination_concurrency_feedback_debug = no detect_8bit_encoding_header = yes disable_dns_lookups = no disable_mime_input_processing = no disable_mime_output_conversion = no disable_verp_bounces = no disable_vrfy_command = no dont_remove = 0 double_bounce_sender = double-bounce duplicate_filter_limit = 1000 empty_address_recipient = MAILER-DAEMON empty_address_relayhost_maps_lookup_key = <> enable_original_recipient = yes error_notice_recipient = postmaster error_service_name = error execution_directory_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ expand_owner_alias = no export_environment = TZ MAIL_CONFIG LANG fallback_transport = fallback_transport_maps = fast_flush_domains = $relay_domains fast_flush_purge_time = 7d fast_flush_refresh_time = 12h fault_injection_code = 0 flush_service_name = flush fork_attempts = 5 fork_delay = 1s forward_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ forward_path = $home/.forward${recipient_delimiter}${extension}, $home/.forward frozen_delivered_to = yes hash_queue_depth = 1 hash_queue_names = deferred, defer header_address_token_limit = 10240 header_checks = header_size_limit = 102400 helpful_warnings = yes home_mailbox = hopcount_limit = 50 html_directory = /usr/share/doc/packages/postfix-doc/html ignore_mx_lookup_error = no import_environment = MAIL_CONFIG MAIL_DEBUG MAIL_LOGTAG TZ XAUTHORITY DISPLAY LANG=C in_flow_delay = 1s inet_interfaces = localhost inet_protocols = all initial_destination_concurrency = 5 internal_mail_filter_classes = invalid_hostname_reject_code = 501 ipc_idle = 5s ipc_timeout = 3600s ipc_ttl = 1000s line_length_limit = 2048 lmtp_bind_address = lmtp_bind_address6 = lmtp_body_checks = lmtp_cname_overrides_servername = no lmtp_connect_timeout = 0s lmtp_connection_cache_destinations = lmtp_connection_cache_on_demand = yes lmtp_connection_cache_time_limit = 2s lmtp_connection_reuse_time_limit = 300s lmtp_data_done_timeout = 600s lmtp_data_init_timeout = 120s lmtp_data_xfer_timeout = 180s lmtp_defer_if_no_mx_address_found = no lmtp_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit lmtp_destination_concurrency_limit = $default_destination_concurrency_limit lmtp_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback lmtp_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback lmtp_destination_rate_delay = $default_destination_rate_delay lmtp_destination_recipient_limit = $default_destination_recipient_limit lmtp_discard_lhlo_keyword_address_maps = lmtp_discard_lhlo_keywords = lmtp_enforce_tls = no lmtp_generic_maps = lmtp_header_checks = lmtp_host_lookup = dns lmtp_initial_destination_concurrency = $initial_destination_concurrency lmtp_lhlo_name = $myhostname lmtp_lhlo_timeout = 300s lmtp_line_length_limit = 990 lmtp_mail_timeout = 300s lmtp_mime_header_checks = lmtp_mx_address_limit = 5 lmtp_mx_session_limit = 2 lmtp_nested_header_checks = lmtp_pix_workaround_delay_time = 10s lmtp_pix_workaround_maps = lmtp_pix_workaround_threshold_time = 500s lmtp_pix_workarounds = disable_esmtp,delay_dotcrlf lmtp_quit_timeout = 300s lmtp_quote_rfc821_envelope = yes lmtp_randomize_addresses = yes lmtp_rcpt_timeout = 300s lmtp_rset_timeout = 20s lmtp_sasl_auth_cache_name = lmtp_sasl_auth_cache_time = 90d lmtp_sasl_auth_enable = no lmtp_sasl_auth_soft_bounce = yes lmtp_sasl_mechanism_filter = lmtp_sasl_password_maps = lmtp_sasl_path = lmtp_sasl_security_options = noplaintext, noanonymous lmtp_sasl_tls_security_options = $lmtp_sasl_security_options lmtp_sasl_tls_verified_security_options = $lmtp_sasl_tls_security_options lmtp_sasl_type = cyrus lmtp_send_xforward_command = no lmtp_sender_dependent_authentication = no lmtp_skip_5xx_greeting = yes lmtp_starttls_timeout = 300s lmtp_tcp_port = 24 lmtp_tls_CAfile = lmtp_tls_CApath = lmtp_tls_cert_file = lmtp_tls_dcert_file = lmtp_tls_dkey_file = $lmtp_tls_dcert_file lmtp_tls_enforce_peername = yes lmtp_tls_exclude_ciphers = lmtp_tls_fingerprint_cert_match = lmtp_tls_fingerprint_digest = md5 lmtp_tls_key_file = $lmtp_tls_cert_file lmtp_tls_loglevel = 0 lmtp_tls_mandatory_ciphers = medium lmtp_tls_mandatory_exclude_ciphers = lmtp_tls_mandatory_protocols = SSLv3, TLSv1 lmtp_tls_note_starttls_offer = no lmtp_tls_per_site = lmtp_tls_policy_maps = lmtp_tls_scert_verifydepth = 9 lmtp_tls_secure_cert_match = nexthop lmtp_tls_security_level = lmtp_tls_session_cache_database = lmtp_tls_session_cache_timeout = 3600s lmtp_tls_verify_cert_match = hostname lmtp_use_tls = no lmtp_xforward_timeout = 300s local_command_shell = local_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit local_destination_concurrency_limit = 2 local_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback local_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback local_destination_rate_delay = $default_destination_rate_delay local_destination_recipient_limit = 1 local_header_rewrite_clients = permit_inet_interfaces local_initial_destination_concurrency = $initial_destination_concurrency local_recipient_maps = proxy:unix:passwd.byname $alias_maps local_transport = local:$myhostname luser_relay = mail_name = Postfix mail_owner = postfix mail_release_date = 20080902 mail_spool_directory = /var/mail mail_version = 2.5.5 mailbox_command = mailbox_command_maps = mailbox_delivery_lock = fcntl, dotlock mailbox_size_limit = 0 mailbox_transport = mailbox_transport_maps = mailq_path = /usr/bin/mailq manpage_directory = /usr/share/man maps_rbl_domains = maps_rbl_reject_code = 554 masquerade_classes = envelope_sender, header_sender, header_recipient masquerade_domains = masquerade_exceptions = root max_idle = 100s max_use = 100 maximal_backoff_time = 4000s maximal_queue_lifetime = 5d message_reject_characters = message_size_limit = 10240000 message_strip_characters = \0 milter_command_timeout = 30s milter_connect_macros = j {daemon_name} v milter_connect_timeout = 30s milter_content_timeout = 300s milter_data_macros = i milter_default_action = tempfail milter_end_of_data_macros = i milter_end_of_header_macros = i milter_helo_macros = {tls_version} {cipher} {cipher_bits} {cert_subject} {cert_issuer} milter_macro_daemon_name = $myhostname milter_macro_v = $mail_name $mail_version milter_mail_macros = i {auth_type} {auth_authen} {auth_author} {mail_addr} milter_protocol = 2 milter_rcpt_macros = i {rcpt_addr} milter_unknown_command_macros = mime_boundary_length_limit = 2048 mime_header_checks = $header_checks mime_nesting_limit = 100 minimal_backoff_time = 300s multi_recipient_bounce_reject_code = 550 mydestination = $myhostname, localhost.$mydomain mydomain = local.com myhostname = bunyip.local.com mynetworks = 127.0.0.0/8 mynetworks_style = subnet myorigin = $myhostname nested_header_checks = $header_checks newaliases_path = /usr/bin/newaliases non_fqdn_reject_code = 504 non_smtpd_milters = notify_classes = resource, software owner_request_special = yes parent_domain_matches_subdomains = debug_peer_list,fast_flush_domains,mynetworks,permit_mx_backup_networks,qmqpd_authorized_clients,relay_domains,smtpd_access_maps permit_mx_backup_networks = pickup_service_name = pickup plaintext_reject_code = 450 prepend_delivered_header = command, file, forward process_id_directory = pid propagate_unmatched_extensions = canonical, virtual proxy_interfaces = proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $sender_bcc_maps $recipient_bcc_maps $smtp_generic_maps $lmtp_generic_maps proxy_write_maps = $smtp_sasl_auth_cache_name $lmtp_sasl_auth_cache_name qmgr_clog_warn_time = 300s qmgr_fudge_factor = 100 qmgr_message_active_limit = 20000 qmgr_message_recipient_limit = 20000 qmgr_message_recipient_minimum = 10 qmqpd_authorized_clients = qmqpd_client_port_logging = no qmqpd_error_delay = 1s qmqpd_timeout = 300s queue_directory = /var/spool/postfix queue_file_attribute_count_limit = 100 queue_minfree = 0 queue_run_delay = 300s queue_service_name = qmgr rbl_reply_maps = readme_directory = /usr/share/doc/packages/postfix-doc/README_FILES receive_override_options = recipient_bcc_maps = recipient_canonical_classes = envelope_recipient, header_recipient recipient_canonical_maps = recipient_delimiter = reject_code = 554 relay_clientcerts = relay_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit relay_destination_concurrency_limit = $default_destination_concurrency_limit relay_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback relay_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback relay_destination_rate_delay = $default_destination_rate_delay relay_destination_recipient_limit = $default_destination_recipient_limit relay_domains = $mydestination relay_domains_reject_code = 554 relay_initial_destination_concurrency = $initial_destination_concurrency relay_recipient_maps = relay_transport = relay relayhost = relocated_maps = hash:/etc/postfix/relocated remote_header_rewrite_domain = require_home_directory = no resolve_dequoted_address = yes resolve_null_domain = no resolve_numeric_domain = no rewrite_service_name = rewrite sample_directory = /usr/share/doc/packages/postfix-doc/samples send_cyrus_sasl_authzid = no sender_bcc_maps = sender_canonical_classes = envelope_sender, header_sender sender_canonical_maps = hash:/etc/postfix/sender_canonical sender_dependent_relayhost_maps = sendmail_path = /usr/sbin/sendmail service_throttle_time = 60s setgid_group = maildrop show_user_unknown_table_name = yes showq_service_name = showq smtp_always_send_ehlo = yes smtp_bind_address = smtp_bind_address6 = smtp_body_checks = smtp_cname_overrides_servername = no smtp_connect_timeout = 30s smtp_connection_cache_destinations = smtp_connection_cache_on_demand = yes smtp_connection_cache_time_limit = 2s smtp_connection_reuse_time_limit = 300s smtp_data_done_timeout = 600s smtp_data_init_timeout = 120s smtp_data_xfer_timeout = 180s smtp_defer_if_no_mx_address_found = no smtp_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit smtp_destination_concurrency_limit = $default_destination_concurrency_limit smtp_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback smtp_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback smtp_destination_rate_delay = $default_destination_rate_delay smtp_destination_recipient_limit = $default_destination_recipient_limit smtp_discard_ehlo_keyword_address_maps = smtp_discard_ehlo_keywords = smtp_enforce_tls = no smtp_fallback_relay = $fallback_relay smtp_generic_maps = smtp_header_checks = smtp_helo_name = $myhostname smtp_helo_timeout = 300s smtp_host_lookup = dns smtp_initial_destination_concurrency = $initial_destination_concurrency smtp_line_length_limit = 990 smtp_mail_timeout = 300s smtp_mime_header_checks = smtp_mx_address_limit = 5 smtp_mx_session_limit = 2 smtp_nested_header_checks = smtp_never_send_ehlo = no smtp_pix_workaround_delay_time = 10s smtp_pix_workaround_maps = smtp_pix_workaround_threshold_time = 500s smtp_pix_workarounds = disable_esmtp,delay_dotcrlf smtp_quit_timeout = 300s smtp_quote_rfc821_envelope = yes smtp_randomize_addresses = yes smtp_rcpt_timeout = 300s smtp_rset_timeout = 20s smtp_sasl_auth_cache_name = smtp_sasl_auth_cache_time = 90d smtp_sasl_auth_enable = no smtp_sasl_auth_soft_bounce = yes smtp_sasl_mechanism_filter = smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd smtp_sasl_path = smtp_sasl_security_options = smtp_sasl_tls_security_options = $smtp_sasl_security_options smtp_sasl_tls_verified_security_options = $smtp_sasl_tls_security_options smtp_sasl_type = cyrus smtp_send_xforward_command = no smtp_sender_dependent_authentication = no smtp_skip_5xx_greeting = yes smtp_skip_quit_response = yes smtp_starttls_timeout = 300s smtp_tls_CAfile = smtp_tls_CApath = smtp_tls_cert_file = smtp_tls_dcert_file = smtp_tls_dkey_file = $smtp_tls_dcert_file smtp_tls_enforce_peername = yes smtp_tls_exclude_ciphers = smtp_tls_fingerprint_cert_match = smtp_tls_fingerprint_digest = md5 smtp_tls_key_file = $smtp_tls_cert_file smtp_tls_loglevel = 0 smtp_tls_mandatory_ciphers = medium smtp_tls_mandatory_exclude_ciphers = smtp_tls_mandatory_protocols = SSLv3, TLSv1 smtp_tls_note_starttls_offer = no smtp_tls_per_site = smtp_tls_policy_maps = smtp_tls_scert_verifydepth = 9 smtp_tls_secure_cert_match = nexthop, dot-nexthop smtp_tls_security_level = smtp_tls_session_cache_database = smtp_tls_session_cache_timeout = 3600s smtp_tls_verify_cert_match = hostname smtp_use_tls = no smtp_xforward_timeout = 300s smtpd_authorized_verp_clients = $authorized_verp_clients smtpd_authorized_xclient_hosts = smtpd_authorized_xforward_hosts = smtpd_banner = $myhostname ESMTP $mail_name smtpd_client_connection_count_limit = 50 smtpd_client_connection_rate_limit = 0 smtpd_client_event_limit_exceptions = ${smtpd_client_connection_limit_exceptions:$mynetworks} smtpd_client_message_rate_limit = 0 smtpd_client_new_tls_session_rate_limit = 0 smtpd_client_port_logging = no smtpd_client_recipient_rate_limit = 0 smtpd_client_restrictions = smtpd_data_restrictions = smtpd_delay_open_until_valid_rcpt = yes smtpd_delay_reject = yes smtpd_discard_ehlo_keyword_address_maps = smtpd_discard_ehlo_keywords = smtpd_end_of_data_restrictions = smtpd_enforce_tls = no smtpd_error_sleep_time = 1s smtpd_etrn_restrictions = smtpd_expansion_filter = \t\40!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_`abcdefghijklmnopqrstuvwxyz{|}~ smtpd_forbidden_commands = CONNECT GET POST smtpd_hard_error_limit = 20 smtpd_helo_required = no smtpd_helo_restrictions = smtpd_history_flush_threshold = 100 smtpd_junk_command_limit = 100 smtpd_milters = smtpd_noop_commands = smtpd_null_access_lookup_key = <> smtpd_peername_lookup = yes smtpd_policy_service_max_idle = 300s smtpd_policy_service_max_ttl = 1000s smtpd_policy_service_timeout = 100s smtpd_proxy_ehlo = $myhostname smtpd_proxy_filter = smtpd_proxy_timeout = 100s smtpd_recipient_limit = 1000 smtpd_recipient_overshoot_limit = 1000 smtpd_recipient_restrictions = permit_mynetworks,reject_unauth_destination smtpd_reject_unlisted_recipient = yes smtpd_reject_unlisted_sender = no smtpd_restriction_classes = smtpd_sasl_auth_enable = no smtpd_sasl_authenticated_header = no smtpd_sasl_exceptions_networks = smtpd_sasl_local_domain = smtpd_sasl_path = smtpd smtpd_sasl_security_options = noanonymous smtpd_sasl_tls_security_options = $smtpd_sasl_security_options smtpd_sasl_type = cyrus smtpd_sender_login_maps = smtpd_sender_restrictions = hash:/etc/postfix/access smtpd_soft_error_limit = 10 smtpd_starttls_timeout = 300s smtpd_timeout = 300s smtpd_tls_CAfile = smtpd_tls_CApath = smtpd_tls_always_issue_session_ids = yes smtpd_tls_ask_ccert = no smtpd_tls_auth_only = no smtpd_tls_ccert_verifydepth = 9 smtpd_tls_cert_file = smtpd_tls_dcert_file = smtpd_tls_dh1024_param_file = smtpd_tls_dh512_param_file = smtpd_tls_dkey_file = $smtpd_tls_dcert_file smtpd_tls_exclude_ciphers = smtpd_tls_fingerprint_digest = md5 smtpd_tls_key_file = $smtpd_tls_cert_file smtpd_tls_loglevel = 0 smtpd_tls_mandatory_ciphers = medium smtpd_tls_mandatory_exclude_ciphers = smtpd_tls_mandatory_protocols = SSLv3, TLSv1 smtpd_tls_received_header = no smtpd_tls_req_ccert = no smtpd_tls_security_level = smtpd_tls_session_cache_database = smtpd_tls_session_cache_timeout = 3600s smtpd_tls_wrappermode = no smtpd_use_tls = no soft_bounce = no stale_lock_time = 500s stress = strict_7bit_headers = no strict_8bitmime = no strict_8bitmime_body = no strict_mailbox_ownership = yes strict_mime_encoding_domain = no strict_rfc821_envelopes = no sun_mailtool_compatibility = no swap_bangpath = yes syslog_facility = mail syslog_name = postfix tls_daemon_random_bytes = 32 tls_export_cipherlist = ALL:+RC4:@STRENGTH tls_high_cipherlist = ALL:!EXPORT:!LOW:!MEDIUM:+RC4:@STRENGTH tls_low_cipherlist = ALL:!EXPORT:+RC4:@STRENGTH tls_medium_cipherlist = ALL:!EXPORT:!LOW:+RC4:@STRENGTH tls_null_cipherlist = eNULL:!aNULL tls_random_bytes = 32 tls_random_exchange_name = ${data_directory}/prng_exch tls_random_prng_update_period = 3600s tls_random_reseed_period = 3600s tls_random_source = dev:/dev/urandom trace_service_name = trace transport_maps = hash:/etc/postfix/transport transport_retry_time = 60s trigger_timeout = 10s undisclosed_recipients_header = To: undisclosed-recipients:; unknown_address_reject_code = 450 unknown_client_reject_code = 450 unknown_hostname_reject_code = 450 unknown_local_recipient_reject_code = 550 unknown_relay_recipient_reject_code = 550 unknown_virtual_alias_reject_code = 550 unknown_virtual_mailbox_reject_code = 550 unverified_recipient_reject_code = 450 unverified_sender_reject_code = 450 verp_delimiter_filter = -=+ virtual_alias_domains = hash:/etc/postfix/virtual virtual_alias_expansion_limit = 1000 virtual_alias_maps = hash:/etc/postfix/virtual virtual_alias_recursion_limit = 1000 virtual_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit virtual_destination_concurrency_limit = $default_destination_concurrency_limit virtual_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback virtual_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback virtual_destination_rate_delay = $default_destination_rate_delay virtual_destination_recipient_limit = $default_destination_recipient_limit virtual_gid_maps = virtual_initial_destination_concurrency = $initial_destination_concurrency virtual_mailbox_base = virtual_mailbox_domains = $virtual_mailbox_maps virtual_mailbox_limit = 51200000 virtual_mailbox_lock = fcntl, dotlock virtual_mailbox_maps = virtual_minimum_uid = 100 virtual_transport = virtual virtual_uid_maps = bunyip:/var/log # -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

Re: [opensuse] How to clone HDD
by Andrew Joakimsen 26 Nov '09

26 Nov '09

If you still have the original disk obviously you can still boot it. Boot into the installation (or e,g, sysrescue cd) and mount the /boot and / partitions. You need to edit /boot/grub/menu.lst and /etc/fstab and change all references to the old disk to the new one. It also might be possible just to remove the old disk and boot into the openSUSE installer and allow it to do an automatic repair, but I had bad luck even reinstalling the bootloader in 11.2 using this method and even for a manual repair. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Mplayer etc
by Jim Hatridge 26 Nov '09

26 Nov '09

Hi all, I've just installed 11.2 and of course I would like to watch my DVDs on it. But I can't remember where the download is for all the software needed. Could someone help me out here? Thanks, JIM -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

6 5

[opensuse] ATI
by Fred A. Miller 26 Nov '09

26 Nov '09

'Have a client who bought a Toshiba with an ATI HD-3100 video chipset. I installed the kernel headers and ran the ATI driver installer, which went smoothly. The only problem is, when I go into the KDE desktop setup, composting is temporarily disabled and it REFUSES to turn on and stay on, thus no 3D. The ATI config. software under KDE seems fine....sets up with no problems. Does anyone have an idea how to fix this? Thanks! Fred -- "A free people ought not only to be armed and disciplined, but they should have sufficient arms and ammunition to maintain a status of independence from any who might attempt to abuse them, which would include their own government." --George Washington -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

5 17

[opensuse] Two problem installations of v11.2
by Stan Goodman 25 Nov '09

25 Nov '09

1) A notebook machine that had initially v11.1 that I have been using, and unused partitions which I prepared for installation of v11.2. OS/2 BootManager chooses between the two. There is also a single Swap partition, for the use of both. Before installation of v11.2 on the vacant partitions, BootManager contained lines ONLY for the two sets. Now, after v11.2 is installed (and working!), I can boot to either version, but now BootManager contains an additional line, telling me that sda5 (the swapspace) is not formatted. Assuming that this was true, I ran <mkswap /dev/sda5> to fix it; bash returned the message: "Device or resource busy". It's hard to understand how it can be busy if it isn't formatted, but my next step was to boot to a live operating system and try again, but this produced the same busy message. I do not believe that the partition is really unformatted. Can anyone comment? 2) A desktop machine which initially had both v11.1 and v10.3 installed, with GRUB installed separately for them in the root partitions, and OS/2 BootManager to choose between them. I wanted to replace the v10.3 installation with v11.2 (as in the notebook machine, the idea is always to have the previous version available as a maintenance partition). I cannot boot to v11.2, because there is not GRUB present on it. I need to install GRUB on sda6. but all the information I have found on the subject is only for installing on the MBR, which is what I don't want. How can I install GRUB on a partition? -- Stan Goodman Qiryat Tiv'on Israel -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 4

[opensuse] Device notifier sort of broken?
by John Bennett 25 Nov '09

25 Nov '09

Put this in the Suse forums, but no joy, so thought I would try here... Have installed 11.2 and basically pretty impressed, but... a few little problems starting to show. The current one is device notifier (or an associate), which will not allow any device to be unplugged once it has been inserted. If I insert a CD/DVD, or plug in any USB drive, and immediately try and unplug, I always get the message "Could not unmount the device. One or more files on this device are open within an application" (or similar). I get no output from : john@boss:/> fuser -m /dev/sdd1 john@boss:/> OR john@boss:/> lsof /dev/sdd1 john@boss:/> and, yes, it does work if I list other drives, and it is the correct device.... :-) But,can unmount at the command line: john@boss:/> umount -v /dev/sdd1 john@boss:/> Looks like the device notifier may be broke...? How to fix? Thanks, John. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 4

[opensuse] No More Official PPC Distro
by Larry Stotler 25 Nov '09

25 Nov '09

Just got this answer from a bugzilla posting(https://bugzilla.novell.com/show_bug.cgi?id=557580) from Michael Loeffler about why there wasn't a PPC version of 11.2: "we (Novell/SUSE employees) won't provide a ppc distribution anymore. The effort for such a code stream is not justified by 0.3% out of all installations (see Distribution of architecture at http://en.opensuse.org/Statistics) Nevertheless we will support anyone who'd like to take over the task to build an openSUSE ppc distribution." So, what's the interest in trying to keep the PowerPC port alive? With such a small user base, I agree it doesn't make sense for them to continue to do it(although I was under the impression that the POWER port of SLEx was based on openSUSE so I'm not sure what the status of that is going to be either). I have several viable Powermacs that can run openSUSE. Peter Czanik uses it on a Pegasos PPC machine. So, what's the interest? I'm not sure how much help I can be other than testing but I'd like to find out who else is using or wanting to use openSUSE on PPC. Thanx -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

10 15

Re: [opensuse] How to clone HDD
by chusty＠attglobal.net 25 Nov '09

25 Nov '09

Wong, Run fdisk -l and paste the output Then tell us what do you want to clone an to where. With this info well give you the steps in howto terry -----Original Message----- From: "Wong" <wongsuse(a)telkom.net> Subj: Re: [opensuse] How to clone HDD Date: Wed Nov 25, 2009 9:16 am Size: 1K To: "Felix Miata" <mrmazda(a)earthlink.net> cc: <opensuse(a)opensuse.org> >> Yes, I want my 2nd (backup) HDD will able to replace the live one (not >> online backup). So I will not lose too much time to recover downtime. > > Note if you want to use the previously cloned disk to make a newer backup > for > reserve that you must somehow first wipe its partition table prior to > booting > the openSUSE OS on the original. If you don't, you stand to be copying > from > the old backup over the current, which would be very bad for your data. > One > way you might avoid a problem in this regard would be to mount the target > via > USB (or possibly eSATA?) only after finishing a normal boot. Hi Felix. My SuSE contain no data it runs just as Internet gateway. I only need a fast cure when HDD crash. I want to make sure (I think it should work) that I can clone the HDD and replace the crashed one, then system will restored. I have ever cloned HDD (but it was EXT2), and I should do some thing with GRUB. Now, I am facing with ReiserFS that I never did it yet. Thanks Wong -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Beginner: ALL fonts are blurred
by Thomas Blasejewicz 25 Nov '09

25 Nov '09

Probably most people do not mind this phenomenon at all ... but I do. ALL fonts in ALL applications and ALL versions (about 10!) of Linux I have ever seen/tried look "blurred". I saw this on at least 5 different computers, 4 different monitors ... What I mean by "blurred" is: some, not all, characters carry a sort of "shadow" on their back. Looking at the screen with a magnifying glass shows this. So, you have a black line on a white background and next to or behind the black line there is a sort of grey shadow that makes the character appear "blurred". I am not talking about round characters like "O", where you may have those little staircases made up of digital blocks. I mean "straight" lines like a capital "I" or "L", that should be a row of very distinct black bloxes on white background. (that is the way ALL computer screens looked like for decades and that is the way the print on paper looks like). PLEASE tell me, that there is somewhere a little checkmark I can remove (or add or whatever) to correct this appearance and do not have to do a 1,000-page programming job. * History: ca. 5 years ago I bought a very expensive Dell Workstation, the first Windows XP machine I ever used. On that machine the displayed characters also looked "blurred" or maybe "moth-eaten". The customer service sent over an engineer, who confirmed that appearance. -> replaced, HDD, later mother board = no change. I returned the computer to the factory for checkup. No trouble found, but display did not improve either (tried that with at least 3 different monitors!). So, since my eyes are already bad as it is, I refused to stare at a moth-eaten display and returned the computer (had my money back). Two years later I bought another computer (also Dell). Same phenomenon. It took several hours of calls to the customer service and their new trick "Dell connect", where the operator can see what is on my screen, until finally someone said: THAT is a Windows setting. (I don't know exactly the English wording (my system is Japanese), but it says about: "Screen fonts. Use the following effect to smooth the edges of the screen fonts." This option is by default ON. Remove the checkmark and voila: all the characters look just like black lines on white paper. In all applications. And THAT is much easier on the eyes (I know - I am in the medical business and already HAVE ruined my eyesight by staring at stupid screens for over 2 decades). So, I really DO hope (!!!) there is something like that in Linux. Desperately figthing to get this thing going ... Thomas -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

6 12