February 2008 - openSUSE Users - openSUSE Mailing Lists

[opensuse] ivtv0 warning: encoder VBI: Couldn't find start of buffer within the first 256 bytes
by Husam Senussi 01 Feb '08

01 Feb '08

Hi, I'm getting below error when I start playing liveTV with MythTV. ivtv0 warning: encoder VBI: Couldn't find start of buffer within the first 256 bytes And below is my configuration MythTV: 0.20.20070821-1 Linux kernel: 2.6.22.16-0.1 Capture card: Hauppauge PVR 500 ivtv: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.10.3 (tagged release) loading ivtv: Linux version: 2.6.22.16-0.1-default SMP mod_unload ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge card (cx23416 based) ACPI: PCI Interrupt 0000:09:08.0[A] -> GSI 19 (level, low) -> IRQ 19 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) ieee1394: Host added: ID:BUS[0-00:1023] GUID[00304800001005c6] ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv0: Encoder revision: 0x02060039 ivtv i2c driver #0: Test OK tveeprom 1-0050: Hauppauge model 23659, rev D491, serial# 8137700 tveeprom 1-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56) tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 1-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 1-0050: audio processor is CX25843 (idx 37) tveeprom 1-0050: decoder processor is CX25843 (idx 30) tveeprom 1-0050: has radio, has no IR receiver, has no IR transmitter ivtv0: Autodetected WinTV PVR 500 (unit #1) tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0) tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 1-0060: TEA5767 detected. tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #0) tuner 1-0060: type set to 62 (Philips TEA5767HN FM Radio) tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes) wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: Registered device video0 for encoder MPEG (16 MB) ivtv0: Registered device video32 for encoder YUV (2 MB) ivtv0: Registered device vbi0 for encoder VBI (8 MB) ivtv0: Registered device video24 for encoder PCM audio (1 MB) ivtv0: Registered device radio0 for encoder radio tuner 1-0061: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) ivtv0: Initialized WinTV PVR 500 (unit #1), card #0 ivtv: ====================== NEXT CARD ====================== ivtv1: Autodetected Hauppauge card (cx23416 based) ACPI: PCI Interrupt 0000:09:09.0[A] -> GSI 16 (level, low) -> IRQ 16 ivtv1: Unreasonably low latency timer, setting to 64 (was 32) ivtv1: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv1: Encoder revision: 0x02060039 ivtv i2c driver #1: Test OK tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #1) tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1) cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes) wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1) tveeprom 2-0050: Hauppauge model 23659, rev D491, serial# 8137700 tveeprom 2-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56) tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 2-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 2-0050: audio processor is CX25843 (idx 37) tveeprom 2-0050: decoder processor is CX25843 (idx 30) tveeprom 2-0050: has radio, has no IR receiver, has no IR transmitter ivtv1: Correcting tveeprom data: no radio present on second unit ivtv1: Autodetected WinTV PVR 500 (unit #2) ivtv1: Registered device video1 for encoder MPEG (16 MB) ivtv1: Registered device video33 for encoder YUV (2 MB) ivtv1: Registered device vbi1 for encoder VBI (8 MB) ivtv1: Registered device video25 for encoder PCM audio (1 MB) tuner 2-0061: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) ivtv1: Initialized WinTV PVR 500 (unit #2), card #1 ivtv: ==================== END INIT IVTV ==================== lspci -v 09:08.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) Subsystem: Hauppauge computer works Inc. WinTV PVR 500 (1st unit) Flags: bus master, medium devsel, latency 64, IRQ 19 Memory at d0000000 (32-bit, prefetchable) [size=64M] Capabilities: [44] Power Management version 2 09:09.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) Subsystem: Hauppauge computer works Inc. WinTV PVR 500 (2nd unit) Flags: bus master, medium devsel, latency 64, IRQ 16 Memory at d4000000 (32-bit, prefetchable) [size=64M] Capabilities: [44] Power Management version 2 Firmware ls /lib/firmware -l lrwxrwxrwx 1 root root 20 Jan 24 15:46 dvb-ttpci-01.fw -> dvb- ttpci-01.fw-261f -rw-r--r-- 1 root root 234284 Sep 21 20:19 dvb-ttpci-01.fw-261f -rw-r--r-- 1 root root 6639 Sep 24 21:00 license-end-user.txt -rw-r--r-- 1 root root 8292 Sep 24 21:00 license-oemihvisv.txt -rw-r--r-- 1 root root 262144 Sep 24 21:00 v4l-cx2341x-dec.fw -rw-r--r-- 1 root root 376836 Sep 24 21:00 v4l-cx2341x-enc.fw -rw-r--r-- 1 root root 155648 Sep 24 21:00 v4l-cx2341x-init.mpg -rw-r--r-- 1 root root 16382 Sep 24 21:00 v4l-cx25840.fw -rw-r--r-- 1 root root 8192 Sep 24 21:00 v4l-pvrusb2-24xxx-01.fw -rw-r--r-- 1 root root 8192 Sep 24 21:00 v4l-pvrusb2-29xxx-01.fw I also using below setting with driver options ivtv enc_mpg_buffers=16 enc_vbi_buffers=8 I'm getting bad black and wait picture -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Did Yast online updater break?
by Marc and Stephanie Chamberlin 01 Feb '08

01 Feb '08

I am running SuSE 10.3 and am getting an update notification as described - This update fixes various Xserver security issues. File existence disclosure vulnerability (CVE-2007-5958). XInput Extension Memory Corruption Vulnerability [IDEF2888 CVE-2007-6427]. TOG-CUP Extension Memory Corruption Vulnerability [IDEF2901 CVE-2007-6428]. EVI Extension Integer Overflow Vulnerability [IDEF2902 CVE-2007-6429]. MIT-SHM Extension Integer Overflow Vulnerability [IDEF2904 CVE-2007-6429]. XFree86-MISC Extension Invalid Array Index Vulnerability [IDEF2903 CVE-2007-5760]. PCF font parser vulnerability. When I install it I get the following error message - Repository 'openSUSE BuildService - KDE:Community' is invalid. Signature verification failed for repomd.xml Please, check if the URLs defined for this repository are pointing to a valid repository. Disabling repository 'openSUSE BuildService - KDE:Community' because of the above error. Repository 'openSUSE BuildService - Games (action)' is invalid. Signature verification failed for repomd.xml Please, check if the URLs defined for this repository are pointing to a valid repository. Disabling repository 'openSUSE BuildService - Games (action)' because of the above error. Repository 'openSUSE BuildService - KDE:Community' is invalid. Signature verification failed for repomd.xml Please, check if the URLs defined for this repository are pointing to a valid repository. Disabling repository 'openSUSE BuildService - KDE:Community' because of the above error. Error building the cache database: SQL logic error or missing database Disabling repository 'Packman Repository' because of the above error. Error building the cache database: SQL logic error or missing database Disabling repository 'VideoLan Repository' because of the above error. Error building the cache database: SQL logic error or missing database Disabling repository 'VideoLan Repository' because of the above error. Repository 'openSUSE BuildService - Games (action)' is invalid. Signature verification failed for repomd.xml Please, check if the URLs defined for this repository are pointing to a valid repository. Disabling repository 'openSUSE BuildService - Games (action)' because of the above error. What the heck??? This has been working fine, what broke it? Inquiring minds are worried.... Marc... -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

5 6

[opensuse] KnetworkManager on Thinkpad R40
by Tom Patton 01 Feb '08

01 Feb '08

I posted the following yesterday...while un-subscribed... ------------------------- Throughout 10.2, and 10.3, up to a couple weeks ago, I had a flawless wireless (Intersil Prism 2.5) device in this Tpad, under fvwm and controlled manually by Kinternet. [not using ndiswrapper...it just WORKED.] Sometime after the last couple of online updates, kinternet is no longer in control, but rather the Knetworkmanager has invaded and taken over the house! Unfortunately, I discovered this problem at a very inconvenient moment in a meeting today... :-( I attempted to remove networkmanager, but the dependency list is rather huge and entwined. Instead, I have installed everything related to it, and will have to see tomorrow when back in the office if the wireless will connect. However, it seems the only way to obtain the manager gui is from the task bar in KDE. fvwm will not show any icon for it, nor complain if I launch it from CLI...it is somewhere in the ether, I guess. (even though I have the wireless config'd to be controlled "by user with kinternet" in yast, I am rudely told by NetworkManager that HE is in control. Even ROOT can not "ifdown eth3, without a rude msg to go away and don't bother networkmanager!) So my question, is why does it seem the wireless function has been handed over to a KDE-ONLY application????? (Perhaps I have overlooked something, but it sure was simple using Kinternet...) I hope it works in the morning!-- ++++++++++++++++++++++++++++ Bottom line, it DID work today, and I was again able to connect the wireless card, but ONLY from KDE. The documentation is either missing or else very sparse. The app seems to have been written solely as a KDE task-bar app, and I can not figure a way to control it from any other desktop manager. Even if I "killall" the app, and reset the card to be controlled by Kinternet, it seems Yast re-launches Knetworkmanager, and blocks Kinternet from talking to the card. Anyone have any suggestions? Thanks! Tom in NM -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0