March 2007 - openSUSE Users - openSUSE Mailing Lists

[opensuse] PgAdmin3 for SuSE
by Ishikawa Toshiyuki 27 Mar '07

27 Mar '07

Hi list, This is T. Ishikawa, PostgreSQL Users Group, Japan. I've uploaded the latest PgAdmin3, v.1.6.3, a GUI application to control PostgreSQL Database Server for SuSE in rpm format. You can download from: http://developer.pgadmin.org/ftp/release/v1.6.3/opensuse/ It was tested under: openSUSE 10.1/10.2 and SLES/SLED 10. Please enjoy. Regards, -- TI -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Abit BP6 won't install SuSE v9.2 through 10.2
by Larry Stotler 27 Mar '07

27 Mar '07

Hello. I've been using SuSE since v5.3. I run it on pretty much everything including my PowerBook Walstreet, etc. I've got an old Abit BP6 Dual Celeron motherboard. I know that at one point in time I had SuSE running on it(v9.1 I think) with 2 Celeron 400Mhz processors. Recently, I dug it out and decided to try overclocking some 366 chips. I've had some success, but I can't get any version of SuSE from v9.2 to current to install on it. v10.2 locks up the machine at the hardware detection, v10.0 locks up at the setup menus, and the others don't want to go either. What's weird is that I have installed both Vector Linux v5.8, which uses kernel v2.6.18.5, and Kubuntu v6.06, which uses kernel v2.6.17. Both of those correctly identified the system as smp and both ran it fine stock speed and overclocked to 506Mhz. Does anyone have any idea why I can't get SuSE to install? I had the rescue from v9.3 running once, but not the install. Any help will be greatly appriciated. Thanx -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 2

[opensuse] Suspend to disk and aic7xxx
by Rick Kirk 27 Mar '07

27 Mar '07

_______________________________________________________________________________________ Note: This e-mail is subject to the disclaimer contained at the bottom of this message. _______________________________________________________________________________________ Hi All, Have just been playing with s2disk/s2ram. For the first time I've been able to get s2disk working properly on my machine running OpenSus 10.2, all barring one problem. I have an adaptec 2940u2w card in the machine (Asus P4B800). The card drives an LTO1 drive and one SCSI 146GB drive. At first after resume I was getting kernel panics relating to the aic7xxx driver. I realised this was due to my tapeware software running as a daemon (accessing the scsi bus). I disabled the tape daemon (don't need it anyway) and found on resume that everything was OK. Until I tried to query lvm. The 146GB SCSI sits in a volume group (along with 4 other Sata drives). Any access to that drive causes a kernel panic. Ok. So I reduce the vg and remove the SCSI drive. Now everything works perfectly. Through experimentation I have found that I can unload and reload all SCSI modules at suspend/wake providing they are not in use at the time. The only problem here is that I obviously can't reduce out a disk and re-add it the the vg every time I go into standby so consequently I can't make use of the 146GB drive. Any help you could offer would be very much appreciated. Thanks. Cheers, Rick. _______________________________________________________________________________________ The information transmitted in this message and its attachments (if any) is intended only for the person or entity to which it is addressed. The message may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon this information, by persons or entities other than the intended recipient is prohibited. If you have received this in error, please contact the sender and delete this e-mail and associated material from any computer. The intended recipient of this e-mail may only use, reproduce, disclose or distribute the information contained in this e-mail and any attached files, with the permission of the sender. This message has been scanned for viruses with Symantec Scan Engine and cleared by MailMarshal. _______________________________________________________________________________________ -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

RE: [opensuse] installing from usb on old laptop
by Morten Bjørnsvik 27 Mar '07

27 Mar '07

1 0

[opensuse] OOT: avantfax receives fax ok, but no mail?
by Fajar Priyanto 27 Mar '07

27 Mar '07

Hi all, Sorry for the OOT. I tried posting it in the AvantFAX forum, but no reply yet. I'm using HylaFAX hylafax-4.3.3-1suse100 and AvantFAX 2.1.9 on Opensuse 10.2 with qmail on it. As far as sending and receiving faxes all are good. For sending, I receive notofication too by email. But for receiving, I don't get any mail at all. Whereas, in the AvantFAX docs it say that if I fill in email address on the contacts, it will send a mail notification. I've looked into AvantFAX'es faxrcvd.php and the mail function is there. I don't understand why it doesn't work. There's no error in apache log and syslog. Any hints are really appreciated. Thank you very much. -- Fajar Priyanto | Reg'd Linux User #327841 | Linux tutorial http://linux2.arinet.org 9:51am up 1:40, 2.6.18.2-34-default GNU/Linux Let's use OpenOffice. http://www.openoffice.org

1 0

[opensuse] What I Want (was Why I don't upgrade often)
by Stevens 27 Mar '07

27 Mar '07

On Wednesday 14 March 2007 22:59, you wrote: > Fred, > Give Zenwalk a look/try! If you want KDE and other things, ZW would be > the choice, but if you just want a speedy fast Linux, take a stab at > Vector! Might save you a lot of time rather than dealing with FC6. > > regards, > Lee > > I see you are earthlink also. Mind if I ask what part of the country? > I'm on the east coast, NC. Lee: What I want is a system that has a web browser that can display the streaming videos included on many websites, including the different news services like Reuters, ABC, CNN, etc at Yahoo.com and the trailers at film.com. Basically the same functionality that a Windoes user would have on the same websites. In my opinion, this is critically important to get a Windows user to want to swap to Linux. After all, why make the change if you lose features? Office apps are not an issue (due to OO), games aren't either because of wine and parallels (or vmware). Not needing antivirus or malware software won't do the trick, nor will the lower price of the OS. No, the one issue that breaks the bank is full-featured web browsing. If that can be made to work correctly then there is really no need whatsoever to retain Windows, other than maybe a virtual machine for the reasons mentioned above. My goal is to be able to sever the Windows umbilical that so many people are attached to. I want the stereotypical blonde to be able to turn on the computer and run it just as easily as she does Windows. I cannot do that with the tools I have now. As for my location, it's about 50 miles out of Dallas, TX. Fred -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

15 30

[opensuse] Revolution - Seamless Mode Virtualization !
by Alexey Eremenko 26 Mar '07

26 Mar '07

Less than a month from a proprietary offering - Parralels Coherence - comes an Open-Source response. screenshot: http://www.virtualbox.org/attachment/ticket/149/snapshot-Win-a.jpg look: http://www.virtualbox.org/ticket/149 -What do you think of it? -- -Alexey Eremenko "Technologov" -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 3

[opensuse] Asrock Conroe 945-DVI
by Bernhard Walle 26 Mar '07

26 Mar '07

Hello, does anybody own that mainboard? Does it work fine on Linux or do you have problems? Thanks, Bernhard -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] File copy boring issue
by jan kalcic 26 Mar '07

26 Mar '07

Hi People, when I copy any file on a nfs directory it slows down and suddenly stall after about 300 MB. /etc/fstab looks like: host:/data /data nfs noauto,user,soft,rsize=8192,wsize=8192 0 0 /etc/exports: /data/ *(rw,root_squash) I tried also with the async option but nothing improved. Regards, Jan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 2

[opensuse] 10.2: YOU resets /root/ permissions?
by Johnny Ernst Nielsen 26 Mar '07

26 Mar '07

Greetings. How do I tell YOU to not reset my custom permissions for /root/ ? Best regards :o) Johnny :o) -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

8 20