February 2007 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Re: ati remote wonder
by Sunny 20 Feb '07

20 Feb '07

On 2/20/07, Ludmil Miltchev <ludmilmm(a)gmail.com> wrote: > Niakakyv pich kazva, che ATI RW ne mu e rabotilo pod Linux, no go e pusnal. > Tova e linka: > http://64.233.183.104/search?q=cache:lXLeW5I4kYEJ:remotew.free.fr/linux_en.… > Drug e vyprosa, che sigurno tova ne ni triabva, shtoto triabva da e setnato > za MythTV (predpolagam). Ama ako iskash go pogledni (za vseki sluchaj). Ajde > do skoro! > Batkata Tova e staro. Tozi modul veche e chast ot kernel-a i go polzvame. tam sichko e ok, to si bachka, vaprosa e v razstoianieto, sa rovia da vidia koe kak. -- Svetoslav Milenov (Sunny) Even the most advanced equipment in the hands of the ignorant is just a pile of scrap. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 1

[opensuse] ATI Remote Wonder range
by Sunny 20 Feb '07

20 Feb '07

Hi, I got ATI Remote Wonder USB remote control working in 10.2 x86_64. Actually the module is part of the kernel now, and everything works out of the box. I also tried the LIRC implementation - lirc_atiusb module. It works as well. I just hit a very weird behavior - the range in which the remote is accepted is like 2 meters. If I move the remote more than 2 meters away from the receiver, it does not receive signal. The problem is, that if I use the same device on Windows, the range is like 7-8 meters. I just can not figure out how this is possible, but these are the facts. I'll post this on GATOS project bug tracker, but I see there a lot of open cases, which are not answered in an year, so most probably this is not the right place to ask, as the driver is already part of the kernel. I'll also try the lirc mailing lists. So, if someone have any success with this device under suse, and can give some ideas, please do so :) Thanks in advance, Cheers -- Svetoslav Milenov (Sunny) Even the most advanced equipment in the hands of the ignorant is just a pile of scrap. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Yast bad manners
by Carlos E. R. 20 Feb '07

20 Feb '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, Situation: 10.2, gnome. I fire up Yast, then software management (for instance). As I know it is going to take some time, I minimize it and continue typing elsewhere... and hey! Yast pops up un-minimized, grabbing the focus, and not yet ready, as it is loading catalogs. I minimize it again... and again it un-minimizes automatically. This did not happen with 10.1. Three times at least has Yast the bad manners of not staying put, minimized out of the way :-( Is this a bug? Is it intentional (aka feature)? Can I somehow tell gnome not to allow this pesky behaviour? To be sure, it is not the only app that does this - OO does similarly - but today I'm picking on yast O:-) - -- Cheers, Carlos Robinson -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Made with pgp4pine 1.76 iD8DBQFF2Y8KtTMYHG2NR9URAkhvAJ416eJ6/EiML/AT1mRLGBpERChgMACdFF1W g6AB56qUYSF6Z/4DzG8ryZA= =7/xL -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 4

[opensuse] Database Frontend for linux & Postgres
by Art Fore 20 Feb '07

20 Feb '07

Does anyone know of an opensource database frontend for Postgresql database along the lines of MSAccess? I have tried the following with no success Rekall Try to open a table or view or even properties thereof, and it crashes. This is on Suse 10.2 with its Rekall from the dvdk. Knode Cannot even do find/replace on fields, Menu items are there, but they don't work. ditto for OOoBase. PgAdmin Cannot do find/replace. The latest version has the menu options for that, but it does not work. Apparently Wxwidgets that is based on is broken. Cannot do lower case to upper case conversions that I could find without taking a course in SQL. Even Access has problems with ODBC, or maybe it is Windows. Open the postgres database on localhost using Access with ODBC and do the find/replace query, the convert 3 fields to uppercase. Close out Access, Change ODBC setup to look at remote host database. Open Access. It is still looking at the localhost database eventhough ODBC is pointing to remote host. Close Access, reboot WinXP (running under Parallels), then open Access again. Now it is finally looking at the correct database. Does not say much for Microsoft interoperability and they supposedly invented ODBC. Art -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 4

[opensuse] XML viewer
by Hans van der Merwe 20 Feb '07

20 Feb '07

What do people out there use for XML viewing in openSUSE? The software team here generates error logs in XML and views it in IE - formatted with a stylesheet - how can I do the same on my box (without IE obv) E-Mail disclaimer: http://www.sunspace.co.za/emaildisclaimer.htm -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 3

[opensuse] ports powered after shutdown
by Tom Burt 20 Feb '07

20 Feb '07

I have recently upgraded my kernel to 2.6.20-20070216143046-default. When I shut down my PC the light on my mouse stays on, and also the LED on my USB webcam stays on. This does not happen with 2.6.18.2-34-default which I still have, and didn't happen with 2.6.20 rc6 either, which I upgraded from. Does anyone have an idea on how to get those lights turn off when shutting down? My motherboard is an Asus M2N-E, mouse is a MS optical one plugged into a PS/2 port with an adapter, webcam is a Logitech QuickCam Pro 4000. Googling around I only found forum msgs referriing to BIOS settings but since my issue depends on kernel version (without making any changes in the BIOS setup), I don't think those are relevant. BTW all "wake up on event x" settings are off on my PC. Tom -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] 10.3 Alpha 1
by Kenneth Schneider 20 Feb '07

20 Feb '07

Can someone tell me if the openSUSE-10.2GM_10.3Alpha1-DVD-i386.delta.iso will work with the 10.2 boxed set DVD or must it run against the 10.2GM that was downloaded? I'll try it if no one knows for sure. -- Ken Schneider UNIX since 1989, linux since 1994, SuSE since 1998 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

9 12

[opensuse] Mozilla Firefox downloads - Mysterious "web3jeffwilles3.6.06.wvm"
by riccardo35＠gmail.com 20 Feb '07

20 Feb '07

Hello, when using Mozilla Firefox to download files, the download-monitor windows shows a mysterious "web3jeffwilles3.6.06.wvm" What please does this mean, and, WHO is the excellent Mr Jeff Willes ?? thanks -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] Suspend to disk and USB device
by Gianluca Cerminara 20 Feb '07

20 Feb '07

Hi everybody, if I suspend to disk I loose the USB hub. I also tried to unload the related modules before suspending: SUSPEND_MODULES="button uhci_hcd ehci_hcd usbhid usbcore" The messages (see below) report an error related to uhci_hcd and HCRESET, I googled the problem but I couldn't find a solution. Does anybody have experience with this? Many thanks, G Feb 13 18:12:45 cms09xl kernel: usb usb4: root hub lost power or was reset Feb 13 18:12:45 cms09xl kernel: ehci_hcd 0000:00:1d.7: debug port 1 IN USE Feb 13 18:12:45 cms09xl kernel: PCI: cache line size of 32 is not supported by device 0000:00:1d.7 Feb 13 18:12:45 cms09xl kernel: ehci_hcd 0000:00:1d.7: PCI post-resume error -19! Feb 13 18:12:45 cms09xl kernel: ehci_hcd 0000:00:1d.7: HC died; cleaning up Feb 13 18:12:45 cms09xl kernel: PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20020200, writing 20060200) Feb 13 18:12:45 cms09xl kernel: PCI: Setting latency timer of device 0000:00:1e.0 to 64 Feb 13 18:12:45 cms09xl kernel: PM: Writing back config space on device 0000:00:1f.5 at offset 1 (was 2900007, writing 2900000) Feb 13 18:12:45 cms09xl kernel: PCI: Enabling device 0000:00:1f.5 (0000 -> 0003) Feb 13 18:12:45 cms09xl kernel: ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 Feb 13 18:12:45 cms09xl kernel: PCI: Setting latency timer of device 0000:00:1f.5 to 64 Feb 13 18:12:45 cms09xl kernel: eth1: Coming out of suspend... Feb 13 18:12:45 cms09xl kernel: ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 Feb 13 18:12:46 cms09xl kernel: PM: Writing back config space on device 0000:02:03.0 at offset f (was 1c00105, writing 5c00105) Feb 13 18:12:46 cms09xl kernel: PM: Writing back config space on device 0000:02:03.0 at offset 3 (was 28008, writing 2a820) Feb 13 18:12:46 cms09xl kernel: ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 Feb 13 18:12:46 cms09xl kernel: pnp: Device 00:06 does not support activation. Feb 13 18:12:46 cms09xl kernel: pnp: Device 00:07 does not support activation. Feb 13 18:12:46 cms09xl kernel: pnp: Device 00:09 activated. Feb 13 18:12:46 cms09xl kernel: Restarting tasks... done Feb 13 18:12:46 cms09xl kernel: Thawing cpus ... Feb 13 18:12:51 cms09xl kernel: USB Universal Host Controller Interface driver v3.0 Feb 13 18:12:51 cms09xl kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 Feb 13 18:12:51 cms09xl kernel: PCI: Setting latency timer of device 0000:00:1d.0 to 64 Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.0: HCRESET not completed yet! Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001200 Feb 13 18:12:51 cms09xl kernel: usb usb1: new device found, idVendor=0000, idProduct=0000 Feb 13 18:12:51 cms09xl kernel: usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 Feb 13 18:12:51 cms09xl kernel: usb usb1: Product: UHCI Host Controller Feb 13 18:12:51 cms09xl kernel: usb usb1: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd Feb 13 18:12:51 cms09xl kernel: usb usb1: SerialNumber: 0000:00:1d.0 Feb 13 18:12:51 cms09xl kernel: usb usb1: configuration #1 chosen from 1 choice Feb 13 18:12:51 cms09xl kernel: hub 1-0:1.0: USB hub found Feb 13 18:12:51 cms09xl kernel: hub 1-0:1.0: 0 ports detected Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.0: host system error, PCI problems? Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.0: host controller process error, something bad happened! Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.0: host controller halted, very bad! Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.0: HCRESET not completed yet! Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.0: HC died; cleaning up Feb 13 18:12:51 cms09xl kernel: hub 1-0:1.0: activate --> -108 Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.0: HC died; cleaning up Feb 13 18:12:51 cms09xl kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 Feb 13 18:12:51 cms09xl kernel: PCI: Setting latency timer of device 0000:00:1d.1 to 64 Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.1: HCRESET not completed yet! Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.1: irq 10, io base 0x00001600 Feb 13 18:12:52 cms09xl kernel: usb usb2: new device found, idVendor=0000, idProduct=0000 Feb 13 18:12:52 cms09xl kernel: usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 Feb 13 18:12:52 cms09xl kernel: usb usb2: Product: UHCI Host Controller Feb 13 18:12:52 cms09xl kernel: usb usb2: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd Feb 13 18:12:52 cms09xl kernel: usb usb2: SerialNumber: 0000:00:1d.1 Feb 13 18:12:52 cms09xl kernel: usb usb2: configuration #1 chosen from 1 choice Feb 13 18:12:52 cms09xl kernel: hub 2-0:1.0: USB hub found Feb 13 18:12:52 cms09xl kernel: hub 2-0:1.0: 0 ports detected Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.1: host system error, PCI problems? Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.1: host controller process error, something bad happened! Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.1: host controller halted, very bad! Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.1: HCRESET not completed yet! Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.1: HC died; cleaning up Feb 13 18:12:52 cms09xl kernel: hub 2-0:1.0: activate --> -108 Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.1: HC died; cleaning up Feb 13 18:12:52 cms09xl kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 Feb 13 18:12:52 cms09xl kernel: PCI: Setting latency timer of device 0000:00:1d.2 to 64 Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.2: HCRESET not completed yet! Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.2: irq 10, io base 0x00001700 Feb 13 18:12:52 cms09xl kernel: usb usb3: new device found, idVendor=0000, idProduct=0000 Feb 13 18:12:52 cms09xl kernel: usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 Feb 13 18:12:52 cms09xl kernel: usb usb3: Product: UHCI Host Controller Feb 13 18:12:52 cms09xl kernel: usb usb3: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd Feb 13 18:12:52 cms09xl kernel: usb usb3: SerialNumber: 0000:00:1d.2 Feb 13 18:12:52 cms09xl kernel: usb usb3: configuration #1 chosen from 1 choice Feb 13 18:12:52 cms09xl kernel: hub 3-0:1.0: USB hub found Feb 13 18:12:52 cms09xl kernel: hub 3-0:1.0: 0 ports detected Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.2: host system error, PCI problems? Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.2: host controller process error, something bad happened! Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.2: host controller halted, very bad! Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.2: HCRESET not completed yet! Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.2: HC died; cleaning up Feb 13 18:12:52 cms09xl kernel: hub 3-0:1.0: activate --> -108 Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.2: HC died; cleaning up -- -------------------------- Gianluca Cerminara Tel. CERN +41 (0)22 76 71519 Tel. TO +39 011 670 7372 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Deskjet 3745 and gimp
by Hans van der Merwe 20 Feb '07

20 Feb '07

I cant get Gimp to print to this printer, KDE apps print fine. Can anyone please explain to me what exactly the relationships are between the KDE, Yast, CUPS and Gimp printer databases? E-Mail disclaimer: http://www.sunspace.co.za/emaildisclaimer.htm -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 2