April 2005 - openSUSE Users - openSUSE Mailing Lists

SCSI RAID recovery
by Robert Amodeo 19 Jan '06

19 Jan '06

I have a fileserver running SuSE 8.0 with 2 IDE Drives and a SCSI RAID (RAID5). The system boots up to one of the IDE drives, and the SCSI RAID drive runs as a mounted filesystem (/dev/md0). (all filesystems are REISERFS). Problem: The SCSI RAID drive has crashed (won't boot up), and I need to recover it (repair it, through some utility). Further: The software does not seem to want to mount the disks, even though the SCSI BIOS (Adaptec) recognizes the disks, and they are listed as OPTIMAL. I tried to repair the disk(s) (with reiserfsck), but it produced an error message: reiserfs_open: bread failed reading block 2 reiserfs_open: bread failed reading block 16 reiserfs_open: neither new nor old reiserfs form found on /dev/md0 The literature suggested that this error message is hardware related (either a disk is physically damaged, or maybe the RAID isn't recognized), but again, the disks are recognized (and therefore, so is the SCSI Card). I tried to boot up with SuSE CD 1 in Recovery mode, but not sure what to do there (i.e., after the root prompt - just run reiserfsck?). Literature suggests there are plenty of tools to handle disk recovery, and especially RAID support, I can't find reference to them anywhere. The installation of the RAID was trivial (using the YAST2 partitioning GUI window on startup), and yet recovery seems to be a mystery. This can't be right. Does anyone know where there are "decent" and "usable" recovery tools? OR ... does anyone know what "specifically" to do in this case? Can I re-partition without formatting, and recover the existing data? Any help is appreciated - I'm sure I'm missing something "obvious", but can't find "obviously" what to do in the literature, docs, etc. Thank you. Robert Amodeo School of Engineering and Applied Science University of California, Los Angeles

3 4

PC running (SuSE 8.2 Pro / WinME) bootloader lilo -> grub
by Mick Higgins 08 Dec '05

08 Dec '05

Hi List, I have belatedly made the change from lilo to grub carefully converting my lilo config to grub'ese. It seems to work as expected. However, I have a couple of questions which I cannot track down in any off-line source (man, info, howto's etc.) and I am not able to trawl google or list archive with a time-limited unmetered dial-up connection at present. 1. In lilo I always used the boot-floppy option so as not to upset WinME. How do I do something similar in grub? 2. When the bootloader menu appeared in lilo I could interactively overide the default runlevel (ie: boot to runlevel 3 not 5) when necessary. How is this achieved in the grub menu? I will accept a URL to the appropriate list archive entry or web page. Apologies if this has been dealt with before. -- ** Message sent via KDE KMail v1.7.2 on SuSE Linux v8.2 ** Please reply in the format that this message is sent. ** Thanks.

6 5

Time
by jim 13 Nov '05

13 Nov '05

Why is it everytime you boot into Suse10, that the time is different, the time zone doesn't change. Jim

2 4

stable,updated,zero-cost,FLOSS virus software
by David Storrs 17 Oct '05

17 Oct '05

What are people using for anti-virus software? I've got BitDefender running on my machine, but I'd like to find something zero-cost that has a nice GUI so that when I set up boxes for friends and family, they can use it. Regularly (and automatically) updated virus definitions are a must, here. Dave

9 10

icewm in SuSE 9.3
by eddieleprince 15 Sep '05

15 Sep '05

I've installed icewm from yast but I cannot seem to access it. Does anyone know how to change the display from kde to icewm? There doesn't seem to be any options in the login screen or the yast sysconfig editor that lists it as a choice for selection. Thanks Eddie

4 5

remote X vrs VNC
by lerninlinux＠comcast.net 22 Aug '05

22 Aug '05

While I realize VNC can be used on multiple os's, I saw a snip of an article that POed me. It claimed that you couldn't graphically remotely administer a Linux machine before VNC. I assume it was a newbie (as am I), but one who didn't know about X, or Webmin, and came from a PC Anywhere background. I have used VNC at my brothers, but haven't messed with x remotely; what are the benefits/limitations of either, relating to a Linux installation. Has anyone messed with X remotely going either way from a X.org machine to Xfree or vice versa. Trying to learn from others mistakes before I fiddle TIA Randal

9 10

AMD Opteron Laptops... Suggested ones for SuSE?
by Steve Kratz 18 Aug '05

18 Aug '05

Anyone out there used any of the AMD Opteron laptops, and how well have they worked with SuSE Linux?

2 1

Asterisk on Suse minimal installation based on Suse Rescue - what to add to be bootable on HD partition ?
by Robert Rozman 25 Jul '05

25 Jul '05

Hi, I'm trying to go route some of Asterisk users already proposed for Asterisk minimal system. I've started from Suse Rescue system image - I've put it into HD partition. But since rescue is spawned from working system it has empty /boot directories and is not directly bootable if put on HD. I've tried to transfer or install kernel and grub to this partition, but no success (I first access to partition with chroot to make additions...). I get errors on kernel rpm -ivh installation (I guess there are no directories and dependencies found in chroot) and also get error on "grub-install /dev/hda7": Could not find device for /boot: Not found or not a block device Is there anyone more experienced with some advice, howto or example what need to be added to partition to be bootable on HD ? Thanks in advance, regards, Rob.

2 1

Command Line Packet Sniffer
by Lucky Leavell 12 Jul '05

12 Jul '05

I need a command line based packet sniffer. (I would use tethereal but this system has no graphical stuff.) ALl it needs to do is collect raw packets for analysis by ethereal on a different box. Thank you, Lucky Leavell

4 3

Can the 9.1 installer resize an NTFS partition?
by Paul W. Abrahams 30 Jun '05

30 Jun '05

I just attempted to install SuSE 9.1 on my new Dell Inspiron 1000 laptop. When I got to the point of trying to resize the Windows partition (NTFS), I was prevented from doing so because it was mounted. So I removed the mount point and tried again. This time the resize operation did nothing -- no response when I pressed Alt-S. So I tried using a custom partition, and I got a message to the effect that this type of Windows partition could not be resized. The odd thing here is that several people reported in an earlier thread on this subject that they succeeded in resizing the NTFS partition. So I'm wondering why I got a different result than they did. Fortunately I have a way around it by using Partition Manager, but it would be nice if I could use the provided SuSE tools without having to resort to that. Paul

4 6