November 2004 - openSUSE Users - openSUSE Mailing Lists

Kylix 3 in SuSE 9.0
by Damon Register 10 Jan '05

10 Jan '05

Finally I got Kylix 3 installed on SuSE 9 but found trouble right away. Even a new blank project fails to compile. I get a bunch of errors with a file called time.h. After a little searching in this group and elsewhere on the net, I found several references to http://unvclx.sourceforge.net so I got 3.5.1 and installed but still I have the same problem. I have seem some posts here from those who say they have been using Kylix but I would certainly like to know how they got it to work. Yes, I know at least one post said there wasn't much future for Kylix and after my experience so far, I am inclined to agree. I would love to use something like Qt but I don't know of any gui builders for the windows side. I have heard of tools for Linux but since I am wanting to write for both platforms, it would be nice is there was a tool for both sides Damon Register

3 2

Sound problem.
by Fred A. Miller 20 Dec '04

20 Dec '04

Why is it that ALL previous releases from SUSE, Alsa had no problem with a Crystal Audio chipset on this IBM motherboard, and 9.2 does?! The system sees it, and the test is fine, but Alsa can't find the card, therefore I'd screwed for sound. 'Anyone know of a fix? Thanks, Fred -- "Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting the vote." - Benjamin Franklin 1759

8 16

vmware on 9.2
by Jake 15 Dec '04

15 Dec '04

I thought I'd give vmware a try, and installed a 30 day evaluation rpm of VMware Workstation 4.5.2 build-884 using yast. No problems there. However, when I attempt to start vmware I'm told to run vmware-config.pl which produces the following output: linux:~ # vmware-config.pl Making sure services for VMware Workstation are stopped. Stopping VMware services: Virtual machine monitordone Trying to find a suitable vmmon module for your running kernel. None of the pre-built vmmon modules for VMware Workstationis suitable for your running kernel. Do you want this program to try to build the vmmon module for your system (you need to have a C compiler installed on your system)? [yes] yes Using compiler "/usr/bin/gcc". Use environment variable CCto override. What is the location of the directory of C header files that match your running kernel? [/usr/src/linux/include] /usr/src/linux/include // I was unsure about // this Extracting the sources of the vmmon module. Building the vmmon module. Using 2.6.x kernel build system. make: Entering directory `/tmp/vmware-config2/vmmon-only' make -C /usr/src/linux/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules make[1]: Entering directory `/usr/src/linux-2.6.8-24' Makefile:465: .config: No such file or directory WARNING: Symbol version dump /usr/src/linux-2.6.8-24/Module.symvers is missing, modules will have CONFIG_MODVERSIONSdisabled. CC [M] /tmp/vmware-config2/vmmon-only/linux/driver.o /bin/sh: scripts/basic/fixdep: No such file or directory make[2]: *** [/tmp/vmware-config2/vmmon-only/linux/driver.o] Error 1 make[1]: *** [_module_/tmp/vmware-config2/vmmon-only] Error 2 make[1]: Leaving directory `/usr/src/linux-2.6.8-24' make: *** [vmmon.ko] Error 2 make: Leaving directory `/tmp/vmware-config2/vmmon-only' Unable to build the vmmon module. ------- All of which is a little over my head. Have I made some obvious error?

14 22

Upgrade Evolution to ver 2
by Henry Standing 14 Dec '04

14 Dec '04

I have been using Evolution for a couple of years now, and am very happy with it. I would quite like to upgrade to ver 2.0.2, can anyone give me some pointers on how to achieve this with the minimum of fuss? SUSE 9.1 evolution-1.4.6-18.2 Thanks -- _ Henry Standing (\o/) Systems Engineer /_\ Oxford Policy Management lists at opml dot co dot uk

5 5

9.2 on a thinkpad 600x
by Tim Nicholson 13 Dec '04

13 Dec '04

When shutting down 9.2 on a thinkpad it does not perform a power down, which I have to do manually. 8.2 and 9.0 both managed it OK, so what has changed? Not sure where to start looking, there's nothing in the thinkpad utilities I can find. (The Thinkpad doesn't have acpi only apm) -- Tim Nicholson http://www.bbc.co.uk/ This e-mail (and any attachments) is confidential and may contain personal views which are not the views of the BBC unless specifically stated. If you have received it in error, please delete it from your system. Do not use, copy or disclose the information in any way nor act in reliance on it and notify the sender immediately. Please note that the BBC monitors e-mails sent or received. Further communication will signify your consent to this.

6 9

9.2 + XFCE 4.2RC1, Kmenu deleted.
by Ben Higginbottom 07 Dec '04

07 Dec '04

Hello All, I compiled and installed XFCE 4.2rc1 on my 9.2 system on its release, since then I've started a session in KDE only for the menu to have vanished. Removing .kde and .cache restores the default, but needless to say its annoying. Has anyone had a similar problem? I've been running XFCE 4.1 and 4.2 betas on both 9.1 and 9.2 without much of a problem, so I'm rather loath to report it as a bug until I've confirmation that someone else is having the same problems. Regards, Ben

2 1

SUSE 9.2 hangs handling USB memory stick
by Jaroslaw Nozderko 07 Dec '04

07 Dec '04

Hi, I've just purchased 9.2 Pro - it's great, but I have serious problem with mobile USB memory devices. I've sent this post to installation support but it does not cover USB problems. I also reported it as technical feedback, but got no response. However, I found similar problem reports[3]. Registering newly connected device consume a lot of CPU - mostly by hwscan and kdeinit (up to 97%) and the whole system becomes unresponsive for about 10 s. The same for cleanup when device is disconnected. This wasn't happening in 9.0 - does it have something to do with this new, smart, automatic mounting/unmounting ? Is there a way to change that ? This is annoying, but not critical. The more serious is that the whole system usually freezes to death when I connect my 128 MB TwinMos pendrive[1] and perform some operations like file copying. Systems hangs irrecoverably - cold reset is the only solution. That's unbelievable, I've never seens anything like this in Linux before. The first crash happened when I moved mouse cursor over PDF file in Konqueror, so I thought it has something to do with previews in tooltips or other scanning file in background for some attributes. I disabled previews in tooltips in Konqueror settings, but it didn't help - systems still freezes suddenly, mostly during file copying. This happens almost always, but mainly for this pendrive - so far, I am trying to replicate this problem using Sony MS cards with Vantec card reader - so far it works without problems. Mobile disks have vfat filesystems (to be compatible with "leading" platform...) and there are messages in dmesg: FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! dmesg after device is connected: usb 1-2: new full speed USB device using address 4 usb 1-2: Product: USB Mobile Disk usb 1-2: Manufacturer: TTI-MSA usb 1-2: SerialNumber: AAAA000021 scsi2 : SCSI emulation for USB Mass Storage devices Vendor: TTI-MSA Model: USB Mobile Disk Rev: 0.0A Type: Direct-Access ANSI SCSI revision: 02 SCSI device sda: 253120 512-byte hdwr sectors (130 MB) sda: Write Protect is off sda: Mode Sense: 4b 00 00 00 sda: assuming drive cache: write through sda: sda1 Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi2, channel 0, id 0, lun 0, type 0 Vendor: TTI-MSA Model: USB Mobile Disk Rev: 0.0A Type: Direct-Access ANSI SCSI revision: 02 SCSI device sdb: 2880 512-byte hdwr sectors (1 MB) sdb: Write Protect is off sdb: Mode Sense: 4b 00 00 00 sdb: assuming drive cache: write through sdb: sdb1 Attached scsi removable disk sdb at scsi2, channel 0, id 0, lun 1 Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 1, type 0 USB Mass Storage device found at 4 New devices appear: /dev/sda1 and /dev/sdb1 (there are 2 partitions) Opening sda1 in "My computer" triggers 2 messages in dmesg: FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! $ mount [...] /dev/sdb1 on /media/usb-AAAA000021:0:0:1p1 type subfs (rw,noexec,nosuid,nodev,sync,procuid,iocharset=utf8) /dev/sda1 on /media/usb-AAAA000021:0:0:0p1 type subfs (rw,noexec,nosuid,nodev,sync,procuid,iocharset=utf8) Removing device: usb 1-2: USB disconnect, address 4 ... but next time it can be: sdb : READ CAPACITY failed. sdb : status=0, message=00, host=7, driver=00 sdb : sense not available. sdb: Write Protect is off sdb: Mode Sense: 00 00 00 00 sdb: assuming drive cache: write through usb 1-2: USB disconnect, address 5 sdb : READ CAPACITY failed. sdb : status=0, message=00, host=1, driver=00 sdb : sense not available. sdb: Write Protect is off sdb: Mode Sense: 00 00 00 00 sdb: assuming drive cache: write through sdb:<3>Buffer I/O error on device sdb, logical block 0 Buffer I/O error on device sdb, logical block 0 Buffer I/O error on device sdb, logical block 262143 Buffer I/O error on device sdb, logical block 262143 Buffer I/O error on device sdb, logical block 0 ldm_validate_partition_table(): Disk read failed. Buffer I/O error on device sdb, logical block 0 unable to read partition table That's interesting, because I didn't do explicitly anything to /dev/sdb All mentioned equipment works perfectly in SUSE 9.0 (exactly the same hardware[2], another HD). It seems other people have the same problem [3]. Anyone else ? It's almost impossible to reliably use USB sticks. Regards, Jarek PS. One more question: what's the status of POSIX4 message queues in 9.2 ? Is it fully operational or not really ? Call to mq_open always returns -1, errno: 22 (Invalid argument). All arguments seem to be OK, according to [4]. References: [1] USB1.1 Mobile Disk III http://www.twinmos.com/flash/flash_p_usb11_mobile3.htm [2] Hardware Mainboard: ASUS P3BF (bought in 2000) CPU: Celeron Coppermine 1.2GHz (to be more specific, 1 GHZ boosted to 1.2), 512 MB RAM [3] "Suse 9.2 usb memory stick problem, system hangs" http://www.linuxquestions.org/questions/showthread.php? s=&forumid=4&threadid=256832 [4] Bill O. Gallmeister, "POSIX.4: Programming for the real world"

6 8

Wireless card not communicating using ndiswrapper !?
by Jan Elders 06 Dec '04

06 Dec '04

Hello, I have a problem with my SMC 2835W card seemingly not transmitting any radio signal while using ndiswrapper. I have installed and activated ndiswrapper on SuSE 9.1 (2.6.5-7.111-default). When inserting my SMC 2835W card in the PCMCIA slot, the system/ndiswrapper recognize the card. /var/log/messages is telling me : kernel: PCI: Enabling device 0000:02:00.0 (0000 -> 0002) kernel: PCI: Setting latency timer of device 0000:02:00.0 to 64 kernel: ndiswrapper: Buggy ndis driver trying to use unintilized spinlock. Trying to recover...ok. kernel: wlan0: ndiswrapper ethernet device 00:04:e2:cb:c9:88 using driver 2835wicb.sys kernel: wlan0: no IPv6 routers present This look all-right to me, ndiswrapper sees the correct MAC of the card, but the card remains totally dark and ifstatus wlan0 tells me : wlan0 is up 4: wlan0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:04:e2:cb:c9:88 brd ff:ff:ff:ff:ff:ff inet 192.168.123.110/24 brd 192.168.123.255 scope global wlan0 inet6 fe80::204:e2ff:fecb:c988/64 scope link valid_lft forever preferred_lft forever wlan0 IP address: 192.168.123.110/24 Configured routes for interface wlan0: default 192.168.123.1 - - 169.254.0.0 - 255.255.0.0 wlan0 Active routes for interface wlan0: 192.168.123.0/24 proto kernel scope link src 192.168.123.110 169.254.0.0/16 scope link default via 192.168.123.1 1 of 2 configured routes for interface wlan0 up wlan0 IEEE 802.11g ESSID:"" Nickname:"MEDION" Mode:Managed Frequency:2.437GHz Access Point: FF:FF:FF:FF:FF:FF Bit Rate=2Mb/s Tx-Power:32 dBm RTS thr=2347 B Fragment thr=2346 B Encryption key:FABE-DEC5-12 Security mode:restricted Power Management:off Link Quality:100 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 Apparently it does not see the Access Point, which is 100% certain functioning all-right. Also "Signal level:0" suggests to me that the card is not transmitting any radio signal. Using the same card on the same laptop before with Linuxant DriverLoader did work correctly, but I abandoned that solution for other reasons. Also under Windows it works allright. Could there be some command I have to give in the ndiswrapper context in order to activate the wireless transmission of the card ? Help is greatly appreciated. TIA and HAND -- Jan Elders the Netherlands http://www.xs4all.nl/~jrme/ "Home of the Network Acronyms"

4 8

AOL
by Jesse L. Purdom 06 Dec '04

06 Dec '04

Hello. Recently, I convinced a friend of mine who has been married to Windows up until now to give SUSE Linux a try. As he needed to rebuild his system due to issues with WindowsXP, I built the machine as a dual-boot system with SUSE Linux 9.1 Professional. My buddy likes Linux but the one sticking point is that under Windows he uses America Online, and there does not seem to be a replacement for the client under Linux. Has anyone run into this before? Is there an alternative client I can have him use in place of the AOL Windows client. I don't want to install Wine as the system he uses is rather slow and I'm not sure that performance would be acceptable. Any assistance would be greatly appreciated. Jesse

12 19

slow local http access
by Phil Burness 05 Dec '04

05 Dec '04

My local http access is *very* slow when I'm not connected to the internet. Once connected to the internet it's fine. If I connect to music.desktop.home while not connected to the internet it takes about 1-2 minutes to display the opening page. If I connect to music.desktop.home while connected to the internet it takes about 1-2 seconds to display the opening page. Any advice warmly received. Phil Here is my configuration: /etc/hosts 127.0.0.1 localhost 192.168.1.4 desktop desktop.home 192.168.1.13 music.desktop.home my network card is set up as (from ifconfig) wlan0 Link encap:Ethernet HWaddr 00:0D:88:9E:50:AA inet addr:192.168.1.4 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::20d:88ff:fe9e:50aa/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:18778 errors:169163 dropped:0 overruns:0 frame:20642 TX packets:21442 errors:301 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:199 RX bytes:2470882 (2.3 Mb) TX bytes:2295181 (2.1 Mb) Interrupt:11 Memory:f8d81000-f8d91000 wlan0:2 Link encap:Ethernet HWaddr 00:0D:88:9E:50:AA inet addr:192.168.1.13 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:11 Memory:f8d81000-f8d91000 My http.conf is standard as shipped with suse v9.0 (apache2) listen.conf is set as NameVirtualHost * In vhosts.d I have one file called music.conf and it's contents are:- <VirtualHost *> ServerAdmin root(a)desktop.home ServerName music.desktop.home AcceptPathInfo On # DocumentRoot: The directory out of which you will serve your # documents. By default, all requests are taken from this directory, but # symbolic links and aliases may be used to point to other locations. DocumentRoot /home/pburness/public_html/prirad/html # if not specified, the global error log is used ErrorLog /dev/null #CustomLog /vdev/null # log IP addresses HostnameLookups Off AddType application/x-httpd-php .php .phtml .php3 .html .htm DirectoryIndex index.html index.php php_value include_path ".:/home/pburness/public_html/prirad/inc" php_value auto_prepend_file "prepend.php" php_flag track_vars on php_flag magic_quotes_gpc on # UseCanonicalName Off # ServerSignature On <Directory "/home/pburness/public_html/prirad/html/jukebox"> Options All AllowOverride All Order allow,deny Allow from all <Files s> ForceType application/x-httpd-php </Files> <Files stream> ForceType application/x-httpd-php </Files> <Files zip> ForceType application/x-httpd-php </Files> </Directory> <Directory "/home/pburness/public_html/prirad/html/feeds"> <Files feed> ForceType application/x-httpd-php </Files> </Directory> </VirtualHost> my resolv.conf file contains nameserver 127.0.0.1 search home My default gateway is 192.168.1.1

2 1