June 2003 - openSUSE Users - openSUSE Mailing Lists

[SLE] RealPlayer G2 on SuSe 6.2
by yh＠ottawa.com 03 Apr '24

03 Apr '24

Yesterday, I finally got sound going on my Linux setup. I downloaded RealPlayer G2 and it worked beautifully. Today, RealPlayer run but no sound coming out. All other sound functions still work. I can still play my CD, have system sound BUT no sound when I run RealPlayer. /var/log/message said kernel: Sound: DMA (output) timed out - IRQ/DRQ config error? but KDE sound still work. I have re-installed RealPlayer 3 times now, still no sound when I run the RealPlayer. Any help is appreciated. Ying yh(a)ottawa.com -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

3 2

Creating a new user for a deamon
by Rowan Reid 15 Jan '24

15 Jan '24

I'm setting up a cron job for a analysis tool, I'm trying to use the SuSE tools where possible but YAST doent' allow you to create new user without a home I tried /dev/null is there a proper way to do this ? Rowan Reid Job Captain, Systems Administrator STUDIO 3 ARCHITECTS 909 982 1717

3 2

Web Site Standards
by Bryan Tyson 25 Sep '21

25 Sep '21

On Wednesday 03 July 2002 03:38, Michael wrote: > I tried to visit this site. > http://www.bet365.com > The result upset me so much i sent them this. I sent the letter below, and I encourage everyone on the list to send a similar letter. ----------------------------------------- Subject: Create a Real Web Site Please From: Bryan S. Tyson <bryantyson(a)earthlink.net> To: webmaster(a)bet365.com When attempting to view your site using Konqueror 2.2.1 and Mozilla 0.9.4, both Linux web browsers, I was curtly informed that my browser is "incompatible." Your site, sir, is what is "incompatible." Stick with established standards and real html, not Microsoft proprietary "features." *************************************************** Powered by SuSE Linux 7.3 Professional KDE 2.2.1 KMail 1.3.1 This is a Microsoft-free computer Bryan S. Tyson bryantyson(a)earthlink.net ***************************************************

10 9

Mount Windows NT(NTFS) drive as drive Z: for all users
by Keith Jacobs 25 Sep '21

25 Sep '21

We have an winNT server and need to auto mount a shared folder as if it were a windose mapped drive Z: on SuSE8 Could someone please explain how to do this and how to make sure it is set-up for every user everytime the system is booted. Thanks Regards Keith Jacobs New to Linux

3 2

Adding fonts?
by Tracer Bullet 22 Aug '16

22 Aug '16

Hi all, Reading some mails on the GIMP mail list, I ran across the procedure to install some more fonts for not only Gimp, but the system and StarOffice to use also. Well, I installed the fonts, went to the shell and issued the command xset fp+ <font directory> and then the rehash command and all fonts are there! Ok, that went well, but each time I restart the system, I have to do it all over again? Is there a way to make it permanent and read the new fonts like it does the ones the system installs or is that a no-no? end of line Tracer Shell commands: xset fp+ <new font directory> xset fp rehash -- ---KMail 1.2--- SuSE Linux v7.2--- Registered Linux User #225206 /tracerb(a)sprintmail.com/ *Magic Page Products* *Team Amiga* http://home.sprintmail.com/~tracerb

3 2

print from K-Mail run together
by Doug McGarrett 01 May '06

01 May '06

I don't remember seeing this problem on the list. KMail print on screen is clear and most letters are separated. When I print out a mail, some letters, particularly the "t", the "si" and the "sk" combinations are scrunched together with adjoining letters. I am printing to an HP 2200D laserjet. The typeface on screen (and on paper) is a sans-serif font. Even on screen, it is slightly scrunched in spots. "ri" and "ti" and "tt" and "th" are too close together. Suggestions? TNX--doug

5 6

screen, mouse, kb lockup
by Doug McGarrett 26 Apr '06

26 Apr '06

While attempting to stop a video playing on Macro Media Flash Player 7, I managed to lock out everything. I could not move the mouse cursor, the arrow keys and the rest of the kb didn't work, ctl-alt-del did nothing. None of the function keys did anything. (The video was something downloaded from the 'net via Firefox.) I wound up pulling the big switch, as us hams like to say. Is there anything else I could have done? I'm trying to put Linux to practical use, and this is the first time I've seen 10.0 crash, so it's good, but not fool-proof. (If something can be broken, this fool will break it!)

3 2

SCSI RAID recovery
by Robert Amodeo 19 Jan '06

19 Jan '06

I have a fileserver running SuSE 8.0 with 2 IDE Drives and a SCSI RAID (RAID5). The system boots up to one of the IDE drives, and the SCSI RAID drive runs as a mounted filesystem (/dev/md0). (all filesystems are REISERFS). Problem: The SCSI RAID drive has crashed (won't boot up), and I need to recover it (repair it, through some utility). Further: The software does not seem to want to mount the disks, even though the SCSI BIOS (Adaptec) recognizes the disks, and they are listed as OPTIMAL. I tried to repair the disk(s) (with reiserfsck), but it produced an error message: reiserfs_open: bread failed reading block 2 reiserfs_open: bread failed reading block 16 reiserfs_open: neither new nor old reiserfs form found on /dev/md0 The literature suggested that this error message is hardware related (either a disk is physically damaged, or maybe the RAID isn't recognized), but again, the disks are recognized (and therefore, so is the SCSI Card). I tried to boot up with SuSE CD 1 in Recovery mode, but not sure what to do there (i.e., after the root prompt - just run reiserfsck?). Literature suggests there are plenty of tools to handle disk recovery, and especially RAID support, I can't find reference to them anywhere. The installation of the RAID was trivial (using the YAST2 partitioning GUI window on startup), and yet recovery seems to be a mystery. This can't be right. Does anyone know where there are "decent" and "usable" recovery tools? OR ... does anyone know what "specifically" to do in this case? Can I re-partition without formatting, and recover the existing data? Any help is appreciated - I'm sure I'm missing something "obvious", but can't find "obviously" what to do in the literature, docs, etc. Thank you. Robert Amodeo School of Engineering and Applied Science University of California, Los Angeles

3 4

[SLE] LILO - files
by sander.van.vugt＠azlan.nl 06 Sep '04

06 Sep '04

Hi, I'dd like to know what the following files in the directory /boot are about. Can anyone give me a clue or point me to some documentation? - boot.b - chain.b - map - System.map-2.2.14 - chos.* Thanks in advance, Sander ********************************************************************** Disclaimer This email is confidential and intended solely for the use of the individual to whom it is adressed. Any views or opinions presented are solely those of the author and do do not necessarily represent those of the Azlan Holdings bv and/or subsidairy. If you are not the intended recipient, be advised that you have received this email in error and that any use, dissemination, forwarding, printing or copying of this email is strictly prohibited If you have received this email in error please notify Azlan Holdings MIS Helpdesk by telephone on +31 (0) 79 3443200. ********************************************************************* -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/support/faq

4 3

9.1 unuseably slow
by David Bottrill 02 Sep '04

02 Sep '04

We received a copy of 9.1 today at work and I have installed this on three machines with dissapointing results. The first machine was an IBM Thinkpad R40 with a Centino 1600 CPU. This machine worked fine and the performance was great. The second and third machines were unusable, KDE takes serveral minutes to start, attempting to start YAST for instance will take about a minute for the SU box to appear and then another minute for YAST to load. I get similar results for all applications I have tried, in all instances the system performs like a P100 with very little RAM. The machines that run slowly are both Athlon XP based machines, one being an Athlon XP 2400 with 1GB of DDR RAM on an ECS Elite motherboard. The second machine is an XP2000 with 512MB of PC3200 RAM on a PCChips motherboard. I have applied all the updates with no effect. Any ideas would be appreciated, I've had to switch back to 9.0 as the whole 9.1 experience is unuseable has anybody got any ideas? David -- David Bottrill Registered Linux user number 330730 www.bottrill.org Internet SIP Phone: 1-747-244-2699

6 8