October 2003 - openSUSE Users - openSUSE Mailing Lists

How to add secondary IP address to a SuSE box?
by joe_pr＠myrealbox.com 16 Sep '04

16 Sep '04

Hello, I am converting one of our Domino servers fro NT4 to SuSE 8.2. Is there any way to add a secondary IP to the network card? I used to have such a setup for the current NT box and eve tried this config with Mandrake but thi sdoes not seem to be possible with YAST2. Any idea anybody? Thanks Josef Prusa

6 5

[SLE] LILO - files
by sander.van.vugt＠azlan.nl 06 Sep '04

06 Sep '04

Hi, I'dd like to know what the following files in the directory /boot are about. Can anyone give me a clue or point me to some documentation? - boot.b - chain.b - map - System.map-2.2.14 - chos.* Thanks in advance, Sander ********************************************************************** Disclaimer This email is confidential and intended solely for the use of the individual to whom it is adressed. Any views or opinions presented are solely those of the author and do do not necessarily represent those of the Azlan Holdings bv and/or subsidairy. If you are not the intended recipient, be advised that you have received this email in error and that any use, dissemination, forwarding, printing or copying of this email is strictly prohibited If you have received this email in error please notify Azlan Holdings MIS Helpdesk by telephone on +31 (0) 79 3443200. ********************************************************************* -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/support/faq

4 3

9.1 unuseably slow
by David Bottrill 02 Sep '04

02 Sep '04

We received a copy of 9.1 today at work and I have installed this on three machines with dissapointing results. The first machine was an IBM Thinkpad R40 with a Centino 1600 CPU. This machine worked fine and the performance was great. The second and third machines were unusable, KDE takes serveral minutes to start, attempting to start YAST for instance will take about a minute for the SU box to appear and then another minute for YAST to load. I get similar results for all applications I have tried, in all instances the system performs like a P100 with very little RAM. The machines that run slowly are both Athlon XP based machines, one being an Athlon XP 2400 with 1GB of DDR RAM on an ECS Elite motherboard. The second machine is an XP2000 with 512MB of PC3200 RAM on a PCChips motherboard. I have applied all the updates with no effect. Any ideas would be appreciated, I've had to switch back to 9.0 as the whole 9.1 experience is unuseable has anybody got any ideas? David -- David Bottrill Registered Linux user number 330730 www.bottrill.org Internet SIP Phone: 1-747-244-2699

6 8

DVD playback...
by Matthew 14 May '04

14 May '04

Good day, Yes there are legal reasons why SuSE cannot have DVD playback of those pesky movies, but what be done? Would it be too expensive for Novell/SuSE to license a codec? Seems like there is a new copyright law in Germany that has made PackMan be more cautious. No one has made a player for Linux that is 100% legal, is it due to expense? Matt

2 1

SAMSUNG ML-1710 in SuSE 8.2...?
by Chun Ki Shin 31 Dec '03

31 Dec '03

Hi, Does anyone have an experience on installing SAMSUNG ML-1710 printer in SuSE 8.2...? I need your help... I downloaded tar file from the below, http://www.samsung.com/Products/Printer/support/Download/driver/driver_Sams… and click on the file name lpp-1.0.6.i386.tar.gz and installed....Installation seems to be fine...but, it never prints out. Any idea..? Thanks, Shin, _________________________________________________________________ Compare Cable, DSL or Satellite plans: As low as $29.95. https://broadband.msn.com

3 2

Re: [SLE] OpenOffice slow in 8.2
by H du Plooy 27 Dec '03

27 Dec '03

On Wed, 2003-05-28 at 22:19, Fred A. Miller wrote: > Uninstall it, download the latest release, and install it. 'Should fix > your problems. The release that ships with 8.2 is buggy. > > Fred Thanks Fred, that's exactly what I did, installed OOo 1.1Beta. Works smooth as silk if I stop Setiathome, but remains unusuable if seti or anything cpu intensive is running. This in itself isn't so bad, except that I didn't have this problem under 8.1 and 8.0, where I had seti runing with nice=1 all the time and OOo was working smoothly. Just trying to understand this Thanks Hans

9 13

gnutella firewalled on 6346
by fsanta 23 Dec '03

23 Dec '03

I have SuSEfirewall2 configured with port 6346 open but gtk-gnutella tells me that I'm firewalled and no one can connect to me nor can I connect to anyone else. Can someone help? Thanks. SuSe 8.2. Here is my firewall: grep -v '#' /etc/sysconfig/SuSEfirewall2 FW_QUICKMODE="no" FW_DEV_EXT="eth0" FW_DEV_INT="" FW_DEV_DMZ="" FW_ROUTE="yes" FW_MASQUERADE="" FW_MASQ_DEV="$FW_DEV_EXT" FW_MASQ_NETS="" FW_PROTECT_FROM_INTERNAL="no" FW_AUTOPROTECT_SERVICES="no" FW_SERVICES_EXT_TCP="6346 9192 http https ssh" FW_SERVICES_EXT_UDP="" FW_SERVICES_EXT_IP="" FW_SERVICES_DMZ_TCP="" FW_SERVICES_DMZ_UDP="" FW_SERVICES_DMZ_IP="" FW_SERVICES_INT_TCP="" FW_SERVICES_INT_UDP="" FW_SERVICES_INT_IP="" FW_SERVICES_QUICK_TCP="" FW_SERVICES_QUICK_UDP="" FW_SERVICES_QUICK_IP="" FW_TRUSTED_NETS="192.168.1.0/24" FW_ALLOW_INCOMING_HIGHPORTS_TCP="yes" FW_ALLOW_INCOMING_HIGHPORTS_UDP="DNS" FW_SERVICE_AUTODETECT="yes" FW_SERVICE_DNS="no" FW_SERVICE_DHCLIENT="no" FW_SERVICE_DHCPD="no" FW_SERVICE_SQUID="yes" FW_SERVICE_SAMBA="no" FW_FORWARD="" FW_FORWARD_MASQ="" FW_REDIRECT="192.168.1/24,0/0,tcp,80,3128" FW_LOG_DROP_CRIT="yes" FW_LOG_DROP_ALL="no" FW_LOG_ACCEPT_CRIT="yes" FW_LOG_ACCEPT_ALL="no" FW_LOG="--log-level warning --log-tcp-options --log-ip-option --log-prefix SuSE-FW" FW_KERNEL_SECURITY="yes" FW_STOP_KEEP_ROUTING_STATE="no" FW_ALLOW_PING_FW="yes" FW_ALLOW_PING_DMZ="no" FW_ALLOW_PING_EXT="no" FW_ALLOW_FW_TRACEROUTE="yes" FW_ALLOW_FW_SOURCEQUENCH="yes" FW_ALLOW_FW_BROADCAST="no" FW_IGNORE_FW_BROADCAST="yes" FW_ALLOW_CLASS_ROUTING="no" FW_CUSTOMRULES="" FW_REJECT="no" FW_HTB_TUNE_DEV=""

7 21

Gnome Screensavers
by Thom Nuzum 09 Dec '03

09 Dec '03

Hi Folks, I can't seem to get any of the Screen Savers to start in Gnome, though they are all working in KDE... or are they only for KDE? They are in the Gnome menu:system Screen Savers. Thanks (i know they aren't so important)

4 5

SuSE 9.0 install on HP W4000 using S-ATA disks only
by Joaquim Homrighausen 14 Nov '03

14 Nov '03

I am having trouble installing SuSE 9.0 Pro on a brand new HP W4000 that is configured only with a S-ATA disk (120GB) attached to the motherboard. Other configuration options include 1GB ECC RAM; everything else is pretty much standard. It just doesn't want to work -- -Joaquim

6 8

DVD Players in SuSE
by Thom Nuzum 14 Nov '03

14 Nov '03

Can anyone recommend a DVD player that works in SuSE. (plays both cds and dvds) I'm thinking an I/O magic as I can't find any of the devices on the hardware compatibility lists in shops. Thanks Thom Nuzum thom(a)cavtel.net

10 13