May 2000 - openSUSE Users - openSUSE Mailing Lists

Re: [SLE] ls * > bla gives me a lot of ^[[00m in bla
by eilert＠Informatik.Uni-Bremen.DE 29 May '00

29 May '00

Jorn Verwey <jorn.verwey(a)psi.ch> wrote: > partition. I like to use the outcome of "ls -lR *", but when I write > this to file I get the above-mentioned unwanted ^[[00m before and > after file-names. This looks like ls always doing colorized output. Try to add the option --colors=never to ls. Eilert -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Eilert Brinkmann -- Universitaet Bremen -- FB 3, Informatik eilert(a)informatik.uni-bremen.de - eilert(a)tzi.org - eilert(a)linuxfreak.com http://www.informatik.uni-bremen.de/~eilert/ -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

1 0

Re: [SLE] ls * > bla gives me a lot of ^[[00m in bla
by budr＠sirinet.net 29 May '00

29 May '00

Jorn Verwey <jorn.verwey(a)psi.ch> writes: > I like to use the outcome of "ls -lR *", but when I write this to file I > get the above-mentioned unwanted ^[[00m before and after file-names. [...] > PS Although I don't ask for such a script, if somebody has one I would > still be interested, even if that would flatten my learning-curve. I'll give you a hint so you can work it out yourself. :} man dircolors man ls -- Bud Rogers <budr(a)sirinet.net> http://www.sirinet.net/~budr/zamm.html -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

1 0

[SLE] problems with network card!!
by wuilbert＠home.com 29 May '00

29 May '00

Hi folks, well maybe you already know me because of all the dumb questions I ask here. But I really don't have anyone else to ask. So Please I ask for your help . I have an @Home connection to the internet, and I inatalled SuSE 6.1 on my computer. I put all the data provided for the company in the setting for the net. I get this from the dmesg command ----- tulip.c:v0.90 10/20/98 becker(a)cesdis.gsfc.nasa.gov eth0: Macronix 98715 PMAC at 0x2400, 00 80 c6 f8 3e c0, IRQ 11. ------- So, the card is recognized. But when I give ifconfig I get the following: ----- eth0 Link encap:Ethernet HWaddr 00:80:C6:F8:3E:C0 inet addr:24.113.223.159 Bcast:24.113.223.191 Mask:255.255.255.192 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:6 dropped:0 overruns:0 carrier:12 collisions:0 txqueuelen:100 Interrupt:11 Base address:0x2400 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:3924 Metric:1 RX packets:26 errors:0 dropped:0 overruns:0 frame:0 TX packets:26 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 ----- I think that the last output is wrong. the "eth0" interface is not working I was checking the lights of the card in the back of the computer and it doesn't even blink. I guess that means that the card is recognized but the interface can't get up correctly. Therefore anything to configurate it is not going to work. any suggestions about this? By the way I installed redhat in anothe partition and the result from "ifconfig" is exactly the same. Any help please? -wuilbert Jaramillo -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

1 0

[SLE] Virtual Hosts
by rboynton＠chugach.net 29 May '00

29 May '00

Hello, I am a bit new to this so bare with me! I have set up apache and it is working fine, but I have now tried to configure a name based virtual host for a second site I am putting up and I still just get served the main page. when I execute httpd -S the host shows up as configured. Can anyone point me in the right direction? Thanks Rob Boynton -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

3 2

RE: [SLE] Winmodem can't work, Please read this
by tduggan＠dekaresearch.com 29 May '00

29 May '00

Hi, -----Original Message----- From: Syeh Abidin [SMTP:A3@Telkom.net] Sent: Wednesday, May 24, 2000 8:51 AM >Hello All, > This is very confuse problem. > I will tell what I do for My winmodem (HSP PCTEL AUDIOMODEM >Riser 56k) > 1. Download the Driver named HSPPCTEL > 2. Copy the module pctel.o to /lib/modules/2.2.10/net > 3. Write line /sbin/insmod pctel in /sbin/init.d/boot.local > Every time boot there is messages > IRQ 11 > /dev/ttyS15 is PCTel. > or something like that. > 4. use kppp to query modem. Said, sorry modem isn't responding. Check /dev/modem to make sure it is a symbolic link to /dev/ttyS15, if not create or modify it as necessary. > 5. I use cat /proc/interrupts > There is no Interrupts for number 11 I have a lucent pci modem that also uses its own module. It only shows up in /proc/interrupts when it is actually in use and releases it otherwise, so I assume this is normal. > 6. I use lsmod > There is module pctel loaded.. Try looking through the output of lspci, see if it shows up there. I don't know how Linux handles AMR devices, hopefully they are treated like normal pci. If not maybe it is treated like an isa card so check that too (try pnpdump or whatever it is, I'm not that familiar with isapnp cards). Post any output relating to the PCtel. > 7. I use cat /dsp/ttyS15 , Nothing...Out I assume this is a typo? it should be /dev/ttyS15. > So PCtel loaded but not use IRQ 11 ...Why ? and how to solve it. > Someone has recommended me setserial /dev/ttyS15 irq 11 # can't > So WHat 's thing ..!! Finally, check the permissions on /dev/ttyS15 and /dev/modem, IIRC when I ran the install script for my Lucent modem it changed them. What's the output of ls -l /dev/ttyS15 -----Original Message----- From: Rik Dunphy [SMTP:Rik.Dunphy@motorola.com] >Usually when I see "modem isn't responding" it's because there is no >uart setup. This is caused by the char-major-4 (in modules.conf) being >set to serial, yet I have compiled the serial ports into the kernel. I can >only assume that maybe the pctel module is causing a similar >problem. >The easy check is to set char-major-4 to off, and reboot. The Lucent install script changes this to a different char-major (it uses one in the experimental/local range) to avoid such conflicts. His might be similiar, and probably should be. Tim -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

3 5

[SLE] Zyxel ISDN Omninet Plus
by gregus＠spirit.sk 29 May '00

29 May '00

Hi all! Does anyone know if Suse Linux 6.4 supports modem Zyxel ISDN OmniNet Plus (64) ? If no, what to do to get it running? Peter -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

1 0

Re: [SLE] GLIB version
by raghav＠easi.soft.net 29 May '00

29 May '00

Thanks. Actually, i ran the script 'libc.so.6' under /lib and could get to know about the version information. Raghav Calyth wrote: > > Is there any command for getting to know the current glib > > version for my Linux 6.3 version?? > > rpm -q glib (if glib is the name of the package) > > HTH > Calyth -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

1 0

[SLE] Sound for Intel 810 chipset
by raghav＠easi.soft.net 29 May '00

29 May '00

Hi, I was able to install Suse Linux 6.3 on my Intel P III processor on a 810 chipset board. I tried to configure sound on my m/c but to no avail. Does OSS or ALSA support 810 chipset integrated sound card?? The sound card is recognised in Windows 95 as a SoundMax integrated digital sound card. How can i go about configuring sound on my m/c?? Please help!!! Raghav -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

2 5

RE: [SLE] Network security
by TFarrell＠fallschurch.esys.com 29 May '00

29 May '00

Bill, :Anyone know what people are trying when they try to connect to port 137? You may want to check out the thread that starts here: http://www.linux.ie/pipermail/ilug/1999-September/006064.html Thom -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

5 4

[SLE] any clues re kdevelop
by kline＠tao.thought.org 29 May '00

29 May '00

One of the more interesting toys in my KDE environment is kdevelop. I'm about two-thirds of the way seriously looking into some kind of IDE for a project I've been hacking at since 1996. The bad thing about kdevelop is that it uses its own editor or emacs. I've been using vi ever since Bill Joy wrote it and am pretty much stuck. Does anybody know where to stick in the lines for viper so that the emacs with kdevelop will use viper? thanks muchly, gary -- Gary D. Kline kline(a)tao.thought.org Public service Unix -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

1 0