June 2019 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Making Windows 10 play ball with grub?
by Mikhail Ramendik 16 Jun '19

16 Jun '19

Hello, I have installed OpenSUSE 15.1 on a laptop where Windows 10 is already installed the boot system is EFI. GRUB includes a Windows Boot Manager option. However, if I reboot from Windows, I just get Windows. To get Grub, I need to hold Shift when rebooting, then select "Use a device" and then "OpenSUSE". How can I make every reboot show Grub? -- Yours, Mikhail Ramendik Unless explicitly stated, all opinions in my mail are my own and do not reflect the views of any organization -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3

[opensuse] Major reaction delays in icewm with nm-applet
by Mikhail Ramendik 16 Jun '19

16 Jun '19

Hello, I have installed OpenSUSE 15.1 on a laptop with an AMD A6 APU. I installed the basic X Window setup with IceWM. But I need some way to manage the Wi-Fi, so I started nm-applet. But with nm-applet running I am seeing major delays in reaction to keyboard presses and clicks, to the degree of a minute or more. Whether I drag windows, type something into anything, etc etc. The mouse does move but delays make the system unusable. So I need to troubleshoot and fix this issue. Or else I need to replace nm-applet with something else that would run under icewm and give me a tray with wi-fi management. I would appreciate help in either task. -- Yours, Mikhail Ramendik Unless explicitly stated, all opinions in my mail are my own and do not reflect the views of any organization -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] cups -> ps !level! -> faxprinter
by Simon Becherer 15 Jun '19

15 Jun '19

Hi, in short words: i need help to find out how cups sets (internal inside his filter queue) the postscript-level: issue: difference in printing on 2 "normaly identical" systems with same ppd-files: ========================================================================= i have 2 tumbleweed x86-64 machines, same snapshoot, same network. one was updated from older opensuse versions to tumbleweed (=laptop), other (desktop) setup direct (about 2 years in past) to tumbleweed. i have 4 network-printers installed and cups-pdf: 2 qmsminolta one brother-mfc-7460dn and this brother also as fax-printer. i am able to print to all printers with both machines except the fax-printer reacts difference. the fax printer will fax-and-on-the-receifing-fax-machine print also with both machines. =============================================================== BUT withe the laptop text is only shown as empty squares. =============================================================== here is what i found out / how i installed: i have had printer installed only at the desktop machine: i set up the brother mfc with the packages: printer: mfc7460dnlpr-2.1.0-1.i386.rpm cupswrapperMFC7460DN-2.0.4-2.i386.rpm and fax: brmfcfaxlpd-1.0.0-1.i386.rpm brmfcfaxcups-1.0.0-1.i386.rpm from brother homepage. up to sometimes after summer last year after a update from libreoffice 5.x to 6? (because they changes something at the behavior the file: /home/mymachine/.config/libreoffice/4/user/psprint/psprint.conf i have to patch 2 files: usr/share/cups/model/brfax_cups.ppd etc/cups/ppd/brfax_cups.ppd usr/lib/cups/filter/brfaxfilter according to https://bugs.documentfoundation.org/show_bug.cgi?id=89996 now fax from libreoffice worked fine again. ----------------------------------------------- last week i set up all printers in the laptop (it has never had to print before). for this i installed the packages above and patched the files. all printing is fine, faxing will fax, but text when faxing is only empty sqares. then i copied all files including subdirectory's from DESKTOP to LAPTOP: /etc/cups/..... /usr/share/cups/...... /usr/lib/cups /usr/local/brother/..... no difference. then i hacked a little inside the file: /usr/lib/cups/filter/brfaxfilter set there the loglevel to 4 and did not delete the INPUT_TEMP_PS file. the input file is pdf, generated from libreoffice, is identical. (this could be seen when you have to put in faxnumber) in /tmp) but then cups generate a ps file for the queue which will later in the queue translated to the printer specific fax-format and this PS-file is on both machines different: (the input_tmp_ps file): ---- input postscript file ---- (on DESKTOP working OK) %!PS-Adobe-3.0 %Produced by poppler pdftops version: 0.72.0 (http://poppler.freedesktop.org) %%Creator: LibreOffice 6.2.3.2 %%LanguageLevel: 3 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! %%DocumentSuppliedResources: (atend) %%DocumentMedia: A4 595 842 0 () () %%For: (simon) %%Title: (4378) %RBINumCopies: 1 %%Pages: (atend) %%BoundingBox: (atend) %%EndComments %%BeginProlog ...snip..... ============================================================== ---- input postscript file ---- (on LAPTOP not working) %!PS-Adobe-3.0 %Produced by poppler pdftops version: 0.72.0 (http://poppler.freedesktop.org) %%Creator: LibreOffice 6.2.3.2 %%LanguageLevel: 2 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! %%DocumentSuppliedResources: (atend) %%DocumentMedia: A4 595 842 0 () () %%For: (simon) %%Title: (4378) %RBINumCopies: 1 %%Pages: (atend) %%BoundingBox: (atend) %%EndComments %%BeginProlog =========================================== i am not sure if the ps-level is the real problem with the missing chars, but its the first difference i found, so: i checked that pstopdf and pstops is from same repo, i know the laptop has addition the latex packages installed. both files are on both machines identical /usr/bin/... (which pstops and which pdftops shows this path in both machines) i tried in printer dialog from libreoffice set the language (who is for both machines set to "automatic pdf) to ps-level3, no difference i checked inside the users for cups files, could not find the .cups subdir i set up a new user on laptop, no difference i tried to use different charsets in libreoffice: liberation-serif and times-new-roman (fetchmsfonts are installed on both machines) - no difference i take again a look inside both machines ppd files: *cupsFilter: "application/vnd.cups-postscript 0 brfaxfilter" *%==== Basic Device Capabilities ============= *LanguageLevel: "3" ====================================== so where to the hell is something who tell the laptop to use ps-level 2 ????????????????????? for processing this cups filter queue ????? i am out of ideas simoN -- www.becherer.de -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] http://download.opensuse.org/debug/update/leap/15.0/non-oss/
by Dave Howorth 15 Jun '19

15 Jun '19

Is download.opensuse.org working? I can't contact it with YaST but ping responds. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 4

[opensuse] Laptop experience
by Roger Oberholtzer 14 Jun '19

14 Jun '19

I'm considering getting a Dell XPS 13 (9380) to run Tumbleweed. Although it can be bought with Ubuntu, which implies decent Linux compatibility, I'm curious if anyone has experience running Tumbleweed on this computer? It will probably be delivered with Windows 10 as that is the most common model in Sweden. I won't run Ubuntu anyway. I recall someone saying that the Windows license is in the BIOS (or whatever the comparable place is called these days), and that Windows can get the license from there. Meaning that I might be able to install Windows in VirtualBox and the delivered license be used. (VB would pass this info on?) That's nor a requirement. Just curious if I got that right. -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 23

[opensuse] Boost on Tumbleweed
by Roger Oberholtzer 13 Jun '19

13 Jun '19

Mysteriously, the c++ Boost libraries are not built for Tumbleweed https://build.opensuse.org/package/show/devel%3Alibraries%3Ac_c%2B%2B/boost… Should one just add Factory repo? I try not to mix these things... I see that it has been done for 1.66 by a user. I don't know if the build works. But it builds. https://build.opensuse.org/package/show/home%3Acshnick/boost-static-devel Anyone know why it's not built for Tumbleweed? -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 5

[opensuse] Where to report bad mirrors?
by Carlos E. R. 12 Jun '19

12 Jun '19

This mirror is too slow: --2019-06-10 19:17:10-- http://download.opensuse.org/update/leap/15.1/oss/x86_64/kernel-default-dev… Connecting to download.opensuse.org (download.opensuse.org)|195.135.221.134|:80... connected. HTTP request sent, awaiting response... 302 Found Location: http://ftp.rnl.tecnico.ulisboa.pt/pub/opensuse/update/leap/15.1/oss/x86_64/… [following] --2019-06-10 19:17:11-- http://ftp.rnl.tecnico.ulisboa.pt/pub/opensuse/update/leap/15.1/oss/x86_64/… Connecting to ftp.rnl.tecnico.ulisboa.pt (ftp.rnl.tecnico.ulisboa.pt)|193.136.164.6|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 8314408 (7,9M) [application/x-redhat-package-manager] Saving to: ‘kernel-default-devel-4.12.14-lp151.28.4.1.x86_64.rpm’ kernel-default-devel-4.12.14-lp151.28.4.1.x86_64.r 98%[==========================================================================================================> ] 7,78M 325KB/s eta 1s Whom do I report it to, admin(a)o.o? -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

5 38

[opensuse] Trying to create a new virtual 15.1 machine under virtualbox hangs
by Carlos E. R. 12 Jun '19

12 Jun '19

Hi, Trying to create a new virtual 15.1 machine under vmware hangs when it gets to the phase "System Role". I selected "Generic Desktop" and it hangs with 100% CPU load (seen on the host) on its single core. Remote repos were enabled. The machine has 1GB ram assigned (the default), I'll try 2 GB. [...] Yes, it works. So Leap 15.1 doesn't install with the default 1 GB RAM. -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

3 4

[opensuse] Trying to use aria2c instead of wget to download a pattern of files from a site
by Carlos E. R. 11 Jun '19

11 Jun '19

Ok, the goal is to download these patterns: "kernel*rpm" "nfs-kernel*rpm" "virtualbox*rpm" from "http://download.opensuse.org/update/leap/15.1/oss/x86_64/" The advantage with aria2c is that it talks to the MirrorBrain and downloads from several severs at max speed. The problem is that aria2c doesn't do recursive or pattern listing of the site. I mean, that I would have to download the index.html file and parse it to obtain the exact names to then feed aria2c. That is too much for me. Somebody has done this before? -- Cheers / Saludos, Carlos E. R. (from openSUSE 15.0 (Legolas))

4 7

[opensuse] How can I deactivate Polari and pidgin?
by Carlos E. R. 11 Jun '19

11 Jun '19

Hi, One day I tried Polari, did not like it, and exited. But the system tries to start it it continuously: <3.6> 2019-06-11 00:29:30 Telcontar dbus-daemon 4312 - - [session uid=1000 pid=4312] Activating service name='org.freedesktop.Telepathy.Client.Polari' requested by ':1.84' (uid=1000 pid=5224 comm="/usr/lib/mission-control-5 ") <3.6> 2019-06-11 00:29:30 Telcontar dbus-daemon 4312 - - [session uid=1000 pid=4312] Activated service 'org.freedesktop.Telepathy.Client.Polari' failed: Failed to execute program org.freedesktop.Telepathy.Client.Polari: No such file or directory I had to do: mv /usr/bin/polari /usr/bin/polari.no to stop it running, but as you see something tries to start it again for days and days. Not finding it, the system tried to run /usr/bin/pidgin, which I also had to rename as /usr/bin/pidgin.no. Or the other way round, I do not remember which order I tried them, and now they refuse to cease starting. Unless I rename them to *.no, they start and impede empathy from connecting, because they register my nick first. I use XFCE on Leap 15.0. As IRC client I'm using empathy. cer@Telcontar:~> killall mission-control-5 cer@Telcontar:~> killall mission-control-5 cer@Telcontar:~> killall mission-control-5 cer@Telcontar:~> killall -9 mission-control-5 cer@Telcontar:~> killall -9 mission-control-5 cer@Telcontar:~> killall -9 mission-control-5 cer@Telcontar:~> Can't be killed! Seems to belong to "telepathy-mission-control-5.16.3-lp150.3.1.x86_64" Mission Control, or MC, is a Telepathy component providing a way for "end-user" applications to abstract some of the details of connection managers, to provide a simple way to manipulate a bunch of connection managers at once, to remove the need to have in each program the account definitions and credentials, to manage channel handling/request and to manage presence statuses. Distribution: openSUSE Leap 15.0 cer@Telcontar:~> rpm --erase telepathy-mission-control-5.16.3-lp150.3.1.x86_64 error: Failed dependencies: telepathy-mission-control is needed by (installed) polari-3.26.2-lp150.1.6.x86_64 telepathy-mission-control is needed by (installed) empathy-3.12.14-lp150.6.1.x86_64 telepathy-mission-control is needed by (installed) telepathy-mission-control-plugin-goa-3.12.14-lp150.6.1.x86_64 cer@Telcontar:~> -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

3 6

[opensuse] glibc version
by Roger Oberholtzer 11 Jun '19

11 Jun '19

I have an openSUSE 42.3 system on which I am trying to run some libraries compiled for Ubuntu. They are for Z+F lasers (https://www.zf-laser.com/Home.91.0.html?&L=1), not that this is important. But they are starting to add Linux support for their devices. Generally, lots of things work. The only issue is that some of the libraries want a newer version of glibc. openSUSE 42.3 uses 2.22, and these libraries want 2.27. I know that glibc supports various versions at the same time. I guess it is part of the install. That is, IIUC, version 2.22 supports that release, as well as some earlier versions. One does not have different versions of the RPM installed. I think I know the answer to this, but is it possible to update glibc to version 2.27 on openSUSE 42.3? I'm okay if it is in some parallel directory that only these libraries/binaries know about. Has anyone done this kind of thing? -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 4

[opensuse] Question about iptables and port forward masquerading
by Marc Chamberlin 11 Jun '19

11 Jun '19

Hi - I dunno if this is a good group to ask this question but I will give it a shot and perhaps get pointed to a better group... I am running the Apache James email server on an OpenSuSE 15.0 x64 system and because of some other requirements I have to run the James daemon under a system user name and not under root. To accomplish that I had to change all the standard email ports that it listens on, to higher ones (I added 10000 to the standard port numbers so for example instead of having the smtp server listen on port 25 I configured it to listen on port 10025. Then using SuSEfirewall2 I configured it to do forward masquerading to route connections from port 25 to port 10025. So for example, and in particular for localhost which is shown here, I did the following - (sorry about the formatting, Thunderbird seems to be making choices that I don't want and I haven't got the time to figure out how to tell Thunderbird to knock it off!.) FW_FORWARD_MASQ=" ... \ (ext and int interface routing not shown but it is similar to what is shown below for localhost) 0/0,127.0.0.1,tcp,25,10025,127.0.0.1 \ 0/0,127.0.0.1,tcp,465,10465,127.0.0.1 \ 0/0,127.0.0.1,tcp,587,10587,127.0.0.1 \ 0/0,127.0.0.1,tcp,110,10110,127.0.0.1 \ 0/0,127.0.0.1,tcp,995,10995,127.0.0.1 \ 0/0,127.0.0.1,tcp,143,10143,127.0.0.1 \ 0/0,127.0.0.1,tcp,993,10993,127.0.0.1" The server is not protected from the internal network (this is a SOHO net) and all the external ports are opened. From either the internal network, or from the external network I can use telnet to connect to either the low number ports or the high numbered ports successfully. But from the localhost I can only connect to the high numbered ports. Connecting to the low number ports, such as 25, gets me a Connection Refused message when I try and do a 'telnet localhost 25'. ('telnet localhost 10025' works!) Using netstat shows that indeed Apache James (a java application) is listening on for example port 10025 - netstat -plnt Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:10025 0.0.0.0:* LISTEN 25012/java and from a snip of the iptables I see this - iptables -t nat -vnL Chain PREROUTING (policy ACCEPT 226K packets, 15M bytes) pkts bytes target prot opt in out source destination (lots of other stuff removed, in particular the external interface as I don't want to show the IP addresses, but here is a bit showing some of the internal interface) 0 0 DNAT tcp -- eth0 * 0.0.0.0/0 192.168.10.100 tcp dpt:25 to:192.168.10.100:10025 0 0 DNAT tcp -- lo * 0.0.0.0/0 192.168.10.100 tcp dpt:25 to:192.168.10.100:10025 22 1320 DNAT tcp -- p3p1 * 0.0.0.0/0 192.168.10.100 tcp dpt:25 to:192.168.10.100:10025 0 0 DNAT tcp -- p3p2 * 0.0.0.0/0 192.168.10.100 tcp dpt:25 to:192.168.10.100:10025 0 0 DNAT tcp -- tun0 * 0.0.0.0/0 192.168.10.100 tcp dpt:25 to:192.168.10.100:10025 0 0 DNAT tcp -- eth0 * 0.0.0.0/0 192.168.10.100 tcp dpt:465 to:192.168.10.100:10465 0 0 DNAT tcp -- lo * 0.0.0.0/0 192.168.10.100 tcp dpt:465 to:192.168.10.100:10465 9 468 DNAT tcp -- p3p1 * 0.0.0.0/0 192.168.10.100 tcp dpt:465 to:192.168.10.100:10465 0 0 DNAT tcp -- p3p2 * 0.0.0.0/0 192.168.10.100 tcp dpt:465 to:192.168.10.100:10465 (and here is some of the things showing the localhost interface) 0 0 DNAT tcp -- eth0 * 0.0.0.0/0 127.0.0.1 tcp dpt:25 to:127.0.0.1:10025 0 0 DNAT tcp -- lo * 0.0.0.0/0 127.0.0.1 tcp dpt:25 to:127.0.0.1:10025 0 0 DNAT tcp -- p3p1 * 0.0.0.0/0 127.0.0.1 tcp dpt:25 to:127.0.0.1:10025 0 0 DNAT tcp -- p3p2 * 0.0.0.0/0 127.0.0.1 tcp dpt:25 to:127.0.0.1:10025 0 0 DNAT tcp -- tun0 * 0.0.0.0/0 127.0.0.1 tcp dpt:25 to:127.0.0.1:10025 0 0 DNAT tcp -- eth0 * 0.0.0.0/0 127.0.0.1 tcp dpt:465 to:127.0.0.1:10465 0 0 DNAT tcp -- lo * 0.0.0.0/0 127.0.0.1 tcp dpt:465 to:127.0.0.1:10465 0 0 DNAT tcp -- p3p1 * 0.0.0.0/0 127.0.0.1 tcp dpt:465 to:127.0.0.1:10465 0 0 DNAT tcp -- p3p2 * 0.0.0.0/0 127.0.0.1 tcp dpt:465 to:127.0.0.1:10465 0 0 DNAT tcp -- tun0 * 0.0.0.0/0 127.0.0.1 tcp dpt:465 to:127.0.0.1:10465 0 0 DNAT tcp -- eth0 * 0.0.0.0/0 127.0.0.1 tcp dpt:587 to:127.0.0.1:10587 0 0 DNAT tcp -- lo * 0.0.0.0/0 127.0.0.1 tcp dpt:587 to:127.0.0.1:10587 0 0 DNAT tcp -- p3p1 * 0.0.0.0/0 127.0.0.1 tcp dpt:587 to:127.0.0.1:10587 0 0 DNAT tcp -- p3p2 * 0.0.0.0/0 127.0.0.1 tcp dpt:587 to:127.0.0.1:10587 0 0 DNAT tcp -- tun0 * 0.0.0.0/0 127.0.0.1 tcp dpt:587 to:127.0.0.1:10587 0 0 DNAT tcp -- eth0 * 0.0.0.0/0 127.0.0.1 tcp dpt:110 to:127.0.0.1:10110 0 0 DNAT tcp -- lo * 0.0.0.0/0 127.0.0.1 tcp dpt:110 to:127.0.0.1:10110 0 0 DNAT tcp -- p3p1 * 0.0.0.0/0 127.0.0.1 tcp dpt:110 to:127.0.0.1:10110 yada yada yada... So what am I missing? It is important that I get localhost to accept connections on the low ports since I am using other tools, such as sendmail (in non-daemon mode) and I want it to use Apache James as it's MTA. Yet I cannot get connections to the low ports on localhost to work, but I am doing exactly the same sort of setup for the internal and external interfaces and there everything does work! Thanks in advance for any thoughts and ideas. I will be happy to provide more information, just ask! Marc.. -- --... ...-- .----. ... -.. . .-- .- --... .--. -..- .-- -- .- .-. -.-. Computers: the final frontier. These are the voyages of the user Marc. His mission: to explore strange new hardware. To seek out new software and new applications. To boldly go where no Marc has gone before! -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 5

[opensuse] A user writable directory in /run, security implications?
by Robert Hardy 11 Jun '19

11 Jun '19

For years, I have been using a user run script that globally adjusts the display for various lighting conditions (reproduced below). It writes a couple of files in the users home directory to save state, and it has always annoyed me that the globally saved state is not globally available. My thought is to write to a user writable directory in /run, perhaps /run/users, right next to /run/user, but I thought I should check with the experts as to possible security implications. I would also have to instantiate that directory on every boot, and I don't know how off the top of my head. That state is not saved across reboots is a plus. Thoughts? Perhaps such a directory should be available on every system. Here is /usr/local/bin/invert-display: #!/bin/sh if test -f ~/.altered-display; then xcalib -c; if test -f ~/.inverted-display; then rm ~/.altered-display ~/.inverted-display; #normal display else xcalib -red 0.75 0 100 -green 0.75 0 78 -blue 0.75 0 55 -i -a; mv ~/.altered-display ~/.inverted-display; #inverted display fi else if test -f ~/.inverted-display; then xcalib -co 60 -a; #nighttime away from city lights else xcalib -gc 2.2 -a; #high gamma for incident sunlight fi; touch ~/.altered-display; fi; I've used it for years on a laptop that rides around mounted in my car, where it helps deal with varying lighting such as direct sunlight and nighttime use. The idea at night is to minimize total light output so that my eyes can remain dark adapted, so it works best with light background colors. I have lightened the dark parts of the Breeze theme colors to suit, e.g., the active titlebar color matches the color for "Hover Decoration", etc. The script is run by clicking a panel button. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

Re: [opensuse] Question about iptables and port forward masquerading
by Marc Chamberlin 11 Jun '19

11 Jun '19

Aw but Jeffrey you may indeed be partially correct! My own additional research has now found that apparently localhost does not use the PREROUTING chain in the iptables and this is where SuSEfirewall2 is putting these FW_FORWARD_MASQ rules. I think what I have to do is coax SuSEFirewall2 to put the localhost port routing rules in the OUTPUT chain instead. So now the question is how do I do that? Back to Google and searching, hopefully someone here knows and/or will beat me to the answer and share it with this poor lost soul!? ;-) Marc... P.S. Jeffrey had replied privately to me so I have removed identifying information in order to respect that, but wanted to give him kudos and let him and the group see where he has lead me in my search for a solution to this problem. On 6/10/19 6:32 PM, Jeffrey ***** wrote: > My statement is incorrect. > > Sorry, > Jeffrey > > On Mon, Jun 10, 2019, 8:15 PM Jeffrey (email deleted since Jeffery > replied to me privately) wrote: > > I don't think connections to localhost go thru the firewall. > > Jeffrey > > On Mon, Jun 10, 2019, 7:49 PM Marc Chamberlin > <marc(a)marcchamberlin.com <mailto:marc@marcchamberlin.com>> wrote: > > > Hi - I dunno if this is a good group to ask this question but > I will > give it a shot and perhaps get pointed to a better group... > > I am running the Apache James email server on an OpenSuSE 15.0 x64 > system and because of some other requirements I have to run > the James > daemon under a system user name and not under root. To > accomplish that I > had to change all the standard email ports that it listens on, > to higher > ones (I added 10000 to the standard port numbers so for > example instead > of having the smtp server listen on port 25 I configured it to > listen on > port 10025. Then using SuSEfirewall2 I configured it to do forward > masquerading to route connections from port 25 to port 10025. > So for > example, and in particular for localhost which is shown here, > I did the > following - (sorry about the formatting, Thunderbird seems to > be making > choices > that I don't want and I haven't got the time to figure out how > to tell > Thunderbird to knock it off!.) > > FW_FORWARD_MASQ=" ... \ > (ext and int interface routing not shown but it is similar to > what is > shown below for localhost) > 0/0,127.0.0.1,tcp,25,10025,127.0.0.1 \ > 0/0,127.0.0.1,tcp,465,10465,127.0.0.1 \ > 0/0,127.0.0.1,tcp,587,10587,127.0.0.1 \ > 0/0,127.0.0.1,tcp,110,10110,127.0.0.1 \ > 0/0,127.0.0.1,tcp,995,10995,127.0.0.1 \ > 0/0,127.0.0.1,tcp,143,10143,127.0.0.1 \ > 0/0,127.0.0.1,tcp,993,10993,127.0.0.1" > > The server is not protected from the internal network (this is > a SOHO > net) and all the external ports are opened. From either the > internal > network, or from the external network I can use telnet to > connect to > either the low number ports or the high numbered ports > successfully. But > from the localhost I can only connect to the high numbered ports. > Connecting to the low number ports, such as 25, gets me a > Connection > Refused message when I try and do a 'telnet localhost 25'. > ('telnet > localhost 10025' works!) > > Using netstat shows that indeed Apache James (a java > application) is > listening on for example port 10025 - > > netstat -plnt > Active Internet connections (only servers) > Proto Recv-Q Send-Q Local Address Foreign > Address > State PID/Program name > > tcp 0 0 0.0.0.0:10025 > <http://0.0.0.0:10025> 0.0.0.0:* > LISTEN 25012/java > > and from a snip of the iptables I see this - > > iptables -t nat -vnL > Chain PREROUTING (policy ACCEPT 226K packets, 15M bytes) > pkts bytes target prot opt in out > source > destination > > (lots of other stuff removed, in particular the external > interface as I > don't want to show the IP addresses, but here is a bit showing > some of > the internal interface) > > 0 0 DNAT tcp -- eth0 * 0.0.0.0/0 > <http://0.0.0.0/0> > 192.168.10.100 tcp dpt:25 to:192.168.10.100:10025 > <http://192.168.10.100:10025> > 0 0 DNAT tcp -- lo * 0.0.0.0/0 > <http://0.0.0.0/0> > 192.168.10.100 tcp dpt:25 to:192.168.10.100:10025 > <http://192.168.10.100:10025> > 22 1320 DNAT tcp -- p3p1 * 0.0.0.0/0 > <http://0.0.0.0/0> > 192.168.10.100 tcp dpt:25 to:192.168.10.100:10025 > <http://192.168.10.100:10025> > 0 0 DNAT tcp -- p3p2 * 0.0.0.0/0 > <http://0.0.0.0/0> > 192.168.10.100 tcp dpt:25 to:192.168.10.100:10025 > <http://192.168.10.100:10025> > 0 0 DNAT tcp -- tun0 * 0.0.0.0/0 > <http://0.0.0.0/0> > 192.168.10.100 tcp dpt:25 to:192.168.10.100:10025 > <http://192.168.10.100:10025> > 0 0 DNAT tcp -- eth0 * 0.0.0.0/0 > <http://0.0.0.0/0> > 192.168.10.100 tcp dpt:465 to:192.168.10.100:10465 > <http://192.168.10.100:10465> > 0 0 DNAT tcp -- lo * 0.0.0.0/0 > <http://0.0.0.0/0> > 192.168.10.100 tcp dpt:465 to:192.168.10.100:10465 > <http://192.168.10.100:10465> > 9 468 DNAT tcp -- p3p1 * 0.0.0.0/0 > <http://0.0.0.0/0> > 192.168.10.100 tcp dpt:465 to:192.168.10.100:10465 > <http://192.168.10.100:10465> > 0 0 DNAT tcp -- p3p2 * 0.0.0.0/0 > <http://0.0.0.0/0> > 192.168.10.100 tcp dpt:465 to:192.168.10.100:10465 > <http://192.168.10.100:10465> > > (and here is some of the things showing the localhost interface) > > 0 0 DNAT tcp -- eth0 * 0.0.0.0/0 > <http://0.0.0.0/0> > 127.0.0.1 tcp dpt:25 to:127.0.0.1:10025 > <http://127.0.0.1:10025> > 0 0 DNAT tcp -- lo * 0.0.0.0/0 > <http://0.0.0.0/0> > 127.0.0.1 tcp dpt:25 to:127.0.0.1:10025 > <http://127.0.0.1:10025> > 0 0 DNAT tcp -- p3p1 * 0.0.0.0/0 > <http://0.0.0.0/0> > 127.0.0.1 tcp dpt:25 to:127.0.0.1:10025 > <http://127.0.0.1:10025> > 0 0 DNAT tcp -- p3p2 * 0.0.0.0/0 > <http://0.0.0.0/0> > 127.0.0.1 tcp dpt:25 to:127.0.0.1:10025 > <http://127.0.0.1:10025> > 0 0 DNAT tcp -- tun0 * 0.0.0.0/0 > <http://0.0.0.0/0> > 127.0.0.1 tcp dpt:25 to:127.0.0.1:10025 > <http://127.0.0.1:10025> > 0 0 DNAT tcp -- eth0 * 0.0.0.0/0 > <http://0.0.0.0/0> > 127.0.0.1 tcp dpt:465 to:127.0.0.1:10465 > <http://127.0.0.1:10465> > 0 0 DNAT tcp -- lo * 0.0.0.0/0 > <http://0.0.0.0/0> > 127.0.0.1 tcp dpt:465 to:127.0.0.1:10465 > <http://127.0.0.1:10465> > 0 0 DNAT tcp -- p3p1 * 0.0.0.0/0 > <http://0.0.0.0/0> > 127.0.0.1 tcp dpt:465 to:127.0.0.1:10465 > <http://127.0.0.1:10465> > 0 0 DNAT tcp -- p3p2 * 0.0.0.0/0 > <http://0.0.0.0/0> > 127.0.0.1 tcp dpt:465 to:127.0.0.1:10465 > <http://127.0.0.1:10465> > 0 0 DNAT tcp -- tun0 * 0.0.0.0/0 > <http://0.0.0.0/0> > 127.0.0.1 tcp dpt:465 to:127.0.0.1:10465 > <http://127.0.0.1:10465> > 0 0 DNAT tcp -- eth0 * 0.0.0.0/0 > <http://0.0.0.0/0> > 127.0.0.1 tcp dpt:587 to:127.0.0.1:10587 > <http://127.0.0.1:10587> > 0 0 DNAT tcp -- lo * 0.0.0.0/0 > <http://0.0.0.0/0> > 127.0.0.1 tcp dpt:587 to:127.0.0.1:10587 > <http://127.0.0.1:10587> > 0 0 DNAT tcp -- p3p1 * 0.0.0.0/0 > <http://0.0.0.0/0> > 127.0.0.1 tcp dpt:587 to:127.0.0.1:10587 > <http://127.0.0.1:10587> > 0 0 DNAT tcp -- p3p2 * 0.0.0.0/0 > <http://0.0.0.0/0> > 127.0.0.1 tcp dpt:587 to:127.0.0.1:10587 > <http://127.0.0.1:10587> > 0 0 DNAT tcp -- tun0 * 0.0.0.0/0 > <http://0.0.0.0/0> > 127.0.0.1 tcp dpt:587 to:127.0.0.1:10587 > <http://127.0.0.1:10587> > 0 0 DNAT tcp -- eth0 * 0.0.0.0/0 > <http://0.0.0.0/0> > 127.0.0.1 tcp dpt:110 to:127.0.0.1:10110 > <http://127.0.0.1:10110> > 0 0 DNAT tcp -- lo * 0.0.0.0/0 > <http://0.0.0.0/0> > 127.0.0.1 tcp dpt:110 to:127.0.0.1:10110 > <http://127.0.0.1:10110> > 0 0 DNAT tcp -- p3p1 * 0.0.0.0/0 > <http://0.0.0.0/0> > 127.0.0.1 tcp dpt:110 to:127.0.0.1:10110 > <http://127.0.0.1:10110> > yada yada yada... > > So what am I missing? It is important that I get localhost to > accept > connections on the low ports since I am using other tools, such as > sendmail (in non-daemon mode) and I want it to use Apache > James as it's > MTA. Yet I cannot get connections to the low ports on > localhost to work, > but I am doing exactly the same sort of setup for the internal and > external interfaces and there everything does work! > > Thanks in advance for any thoughts and ideas. I will be happy > to provide > more information, just ask! Marc.. > > -- > > --... ...-- .----. ... -.. . .-- .- --... .--. > -..- .-- -- .- .-. -.-. > Computers: the final frontier. These are the voyages of the > user Marc. His mission: to explore strange new hardware. > To seek out new software and new applications. To boldly > go where no Marc has gone before! > > > -- > To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org > <mailto:opensuse%2Bunsubscribe@opensuse.org> > To contact the owner, e-mail: opensuse+owner(a)opensuse.org > <mailto:opensuse%2Bowner@opensuse.org> > -- --... ...-- .----. ... -.. . .-- .- --... .--. -..- .-- -- .- .-. -.-. Computers: the final frontier. These are the voyages of the user Marc. His mission: to explore strange new hardware. To seek out new software and new applications. To boldly go where no Marc has gone before! -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] How to connect two servers through an Ethernet A/B switch and not change the upstream MAC addy?
by Lew Wolfgang 10 Jun '19

10 Jun '19

Hi Folks, I've got an interesting network configuration problem that I'd like to run by you all. At this time I've got a server that connects to a switch at 1GbE over Cat-6 copper with RJ-45 connections. I don't have admin rights on the switch and it uses MAC address authentication to turn on the port. The server is rather important and contains about 400-TB of data in multiple RAID-6 arrays. I've received authorization to purchase a second "mirror" server to act as a warm spare. They will have a private 192.168 subnet via second Ethernet ports, maybe 10GbE, to synchronize the data on a regular basis between the servers. What's the best way to hook these up? I'm thinking of something like an RJ-45 A/B switch to manually connect one or the other server to the upstream switch. But then, it looks like simple switches just pass through the two back MAC addresses, and I need the A/B switch to present the same MAC to upstream at all times. Could I use macchanger on each of the servers to keep the same MAC presented through the switch? Or is there a better way? Thanks, Lew -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 22

[opensuse] About tail -f
by Carlos E. R. 10 Jun '19

10 Jun '19

Hi, I have a bunch of terminals running "tail -f /some/logfile" (directly from the terminal without bash). The problem is that when the logfile is rotated, it does not catch the "new" log. I have to terminate that tail and start another. How could I automate this, another tail program? (on some tail -f terminals I have, rotate works automatically) To be exact, I use this: xfce4-terminal \ --tab --command="/home/cer/bin/terminales_one /var/log/warn" --title="* Warn *" \ --tab --command="/home/cer/bin/terminales_one /var/log/messages" --title=messages \ Where terminales_one is: while true ; do tail -f -n 1000 $1 ; sleep 5 ; done Maybe this is the trick: -f, --follow[={name|descriptor}] output appended data as the file grows; an absent option argument means 'descriptor' -F same as --follow=name --retry So use -F instead? I'm going to try that, but it may take days till I notice if it works or not. -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

2 1

[opensuse] Mirroring some files locally from a repository
by Carlos E. R. 10 Jun '19

10 Jun '19

Hi, I copy or mirror the 15.1 kernel and other files locally. I use: #!/bin/bash wget -r -l1 --no-parent -nd -A "kernel*rpm" -A "nfs-kernel*rpm" -A "virtualbox*rpm" "http://download.opensuse.org/distribution/leap/15.1/repo/oss/x86_64/" wget -r -l1 --no-parent -nd -A "kernel*rpm" -A "virtualbox*rpm" "http://download.opensuse.org/distribution/leap/15.1/repo/oss/noarch/" I see this in the output: --2019-06-10 18:33:55-- http://download.opensuse.org/distribution/leap/15.1/repo/oss/x86_64/kernel-… Connecting to download.opensuse.org (download.opensuse.org)|195.135.221.134|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 8040856 (7,7M) [application/x-rpm] Saving to: ‘kernel-vanilla-devel-4.12.14-lp151.26.4.x86_64.rpm.1.tmp’ kernel-vanilla-devel-4.12.14-lp151.26.4.x86_64.rpm 100%[=============================================================================================================>] 7,67M 1,63MB/s in 5,3s 2019-06-10 18:34:00 (1,46 MB/s) - ‘kernel-vanilla-devel-4.12.14-lp151.26.4.x86_64.rpm.1.tmp’ saved [8040856/8040856] Removing kernel-vanilla-devel-4.12.14-lp151.26.4.x86_64.rpm.1.tmp since it should be rejected. So first it downloads that file (slowly sometimes), then removes it, probably because there is already a local copy. How could I improve my download command line so that it doesn't download things that it is going to delete later, wasting time? -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

2 2

[opensuse] Help locating text file in remote repository
by Dutch Ingraham 10 Jun '19

10 Jun '19

Hi everyone: I ask for your help in finding a specific file in a remote repository. Specifically, I am looking for an Haskell file named "Prelude.html." For those unfamiliar with Haskell, there are a number of files with this name; I am looking for a specific one canonically located in the ../base-4.12.0.0-docs/src directory [1]. I have tried searching with zypper to no avail: dutch@tumbleweed3500:~> zypper se --provides Prelude.html Loading repository data... Reading installed packages... No matching items found. Using the full path to the file does work, though: dutch@tumbleweed3500:~> zypper se --provides /usr/share/doc/ghc-8.6.5/html/libraries/base-4.12.0.0/Prelude.html Loading repository data... Reading installed packages... S | Name | Summary | Type --+----------------+----------------------------------------+-------- i | ghc-base-devel | Haskell base library development files | package However, I am looking for the version of Prelude.html that resides in the src/ subdirectory, but the canonical location provides no results: dutch@tumbleweed3500:~> zypper se --provides /usr/share/doc/ghc-8.6.5/html/libraries/base-4.12.0.0/src/Prelude.html Loading repository data... Reading installed packages... No matching items found. I also tried using zypper se --file-list Prelude, but that only returns package names including "prelude," not packages including a file named "Prelude." I have also tried a couple of utilities (scout, cnf) but they don't seem to search for text files. So, I have two questions: (1) is it possible to search a remote repository for opensuse files WITHOUT first having the full path name to the file? and (2) does opensuse package the specific file I'm looking for? Thanks for your help. [1] http://hackage.haskell.org/package/base-4.12.0.0/docs/. There are two Prelude.html files listed here; note about half way down the page there is a src/ entry with the second Prelude.html file. This is the file I am searching for. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 10

[opensuse] KDE Connect doesn't work - 15.1
by James Knott 09 Jun '19

09 Jun '19

KDE Connect, in openSUSE 15.1, doesn't seem to work. When I try to refresh the devices, neither my cell phone nor tablet are found. If I try to use the previously saved connection on either device, it fails. Both devices work fine with my notebook computer, running openSUSE 15.0. Has anyone else experienced this? Any ideas? tnx jk -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3

[opensuse] OT: only a rspamd test
by Günther J. Niederwimmer 09 Jun '19

09 Jun '19

Test -- mit freundliche Grüßen / best regards, Günther J. Niederwimmer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 6

[opensuse] Leap 15.1 Installation Experience
by Lew Wolfgang 09 Jun '19

09 Jun '19

Hi Folks, I just had a "bad" experience while doing a full install of Leap 15.1 from DVD. I'll relate my trials here just in case others might be affected too. I normally like to wait a bit before using a new release, but some "political" considerations overrode my usual caution. I've done one full install and maybe six or so upgrades from 15.0 without any unexpected issues. Nice job, developers! But this particular desktop was running 42.3, and had been running well for years since 13.2. It has an Nvidia GeForce GTS 250 frame buffer running on an Intel DP55KG mobo with an I7 CPU. So I installed 15.1 on an available SSD partition formatted with Ext-4. Things went well until the first boot, when the entire system froze. Black screen, no flashing lights, nothing. I was able to successfully boot with nomodeset, but the display was kind of funky in a number of different ways. I added the nvidia repository and the modules appeared to load after a zypper dup, but it didn't fix the problem. Further, rpm -qa didn't list the nvidia drivers! Maybe I was seeing things? So I next tried downloading and installing the proprietary Nvidia binary blob, which also didn't work. Strange. Given that the box was working well with 42.3 and earlier, and that I hadn't seen any issues like this with 15.0, I tried a 15.0 full-install from DVD and it worked! I added the nvidia repo and things continued to work after a zypper dup. Then, I ran a DVD upgrade, not full install, to 15.1 and it also worked! Add the nvidia repo again, and we're all happy as clams. Bottom line: Upgrade to 15.1 from 15.0 worked when a direct install of 15.1 failed. I suspect something is going on with the Nvidia frame buffer. I was kind of rushed with this install, the user isn't working this week and I needed to get it ready for his return, or I would have taken more time document and understand things a bit more. Maybe next time, I have a few more identical desktops to work through. I do notice some lingering bugs in things like kdesvn, coolkey, pam_pkcs11, and kscreenlocker, but I'll report those in bugzilla. Regards, Lew -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 10

[opensuse] Amarok locks up frequently
by James Knott 08 Jun '19

08 Jun '19

Since updating to openSUSE 15.1, I've noticed Amarok locks up frequently. Some times it runs for hours, other times it stops after a few songs. While I can usually close it with Quit, sometimes I have to kill the app from the command line. In 15.0 it locked up occasionally, nowhere near as it does in 15.1. Has anyone else experienced this? tnx jk -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Problem booting 15.1
by Frans de Boer 08 Jun '19

08 Jun '19

LS, Ever since I updated my 15.0 to 15.1, including updates, the system will not boot correctly with the supplied kernel. Any other (own compiled or directly copied from TW) does boot correctly. My system is an old but still going strong enough Phenom II 965. Observation: the kernel does boot, it displays messages about an attached USB mass storage device, I see a lot of disk activity but never ends at a prompt or other display. Interrupts are still going on, but no display. Anybody a suggestion? Regards, Frans. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 4

[opensuse] 15.1 .Xresources not honored - Where to set xterm*termName: xterm-256color
by David C. Rankin 08 Jun '19

08 Jun '19

All, Using zsh on 15.1 my prompt was set without color. The problem is the xterm TERM variable (resource xterm.termName: xterm-256color) is not set as specified in my ~/.Xresources file. Where to set xterm-256color in 15.1? -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 4

[opensuse] certbot error
by Dave Howorth 08 Jun '19

08 Jun '19

I just decided to see if I could set up HTTPS on the Apache server(s) on my private LAN. I installed certbot (Leap 15.0) but I got an error when I ran it: # certbot --apache Saving debug log to /var/log/certbot/letsencrypt.log Plugins selected: Authenticator apache, Installer apache Enter email address (used for urgent renewal and security notices) (Enter 'c' to cancel): certbot(a)howorth.org.uk ------------------------------------------------------------------------------- Please read the Terms of Service at https://letsencrypt.org/documents/LE-SA-v1.2-November-15-2017.pdf. You must agree in order to register with the ACME server at https://acme-v01.api.letsencrypt.org/directory ------------------------------------------------------------------------------- (A)gree/(C)ancel: A An unexpected error occurred: The server experienced an internal error :: Unable to update registration Please see the logfiles in /var/log/certbot for more details. The contents of the log are just under 15000 bytes from that session! The error seems to start at: 2019-06-07 21:57:08,381:DEBUG:urllib3.connectionpool:https://acme-v01.api.letsencrypt.org:443 "POST /acme/reg/58775261 HTTP/1.1" 500 107 2019-06-07 21:57:08,382:DEBUG:acme.client:Received response: HTTP 500 Server: nginx Content-Type: application/problem+json Content-Length: 107 Boulder-Requester: 58775261 Replay-Nonce: mEggCvGs9jNQkdzADeFIjybA87yrXSm3jK2rYlucpdM Expires: Fri, 07 Jun 2019 20:57:08 GMT Cache-Control: max-age=0, no-cache, no-store Pragma: no-cache Date: Fri, 07 Jun 2019 20:57:08 GMT Connection: close { "type": "urn:acme:error:serverInternal", "detail": "Unable to update registration", "status": 500 } 2019-06-07 21:57:08,382:DEBUG:certbot.log:Exiting abnormally: Traceback (most recent call last): File "/usr/bin/certbot", line 11, in <module> load_entry_point('certbot==0.24.0', 'console_scripts', 'certbot')() File "/usr/lib/python2.7/site-packages/certbot/main.py", line 1315, in main return config.func(config, plugins) File "/usr/lib/python2.7/site-packages/certbot/main.py", line 1072, in run le_client = _init_le_client(config, authenticator, installer) File "/usr/lib/python2.7/site-packages/certbot/main.py", line 637, in _init_le_client acc, acme = _determine_account(config) File "/usr/lib/python2.7/site-packages/certbot/main.py", line 516, in _determine_account config, account_storage, tos_cb=_tos_cb) File "/usr/lib/python2.7/site-packages/certbot/client.py", line 166, in register regr = perform_registration(acme, config, tos_cb) File "/usr/lib/python2.7/site-packages/certbot/client.py", line 190, in perform_registration tos_cb) File "/usr/lib/python2.7/site-packages/acme/client.py", line 838, in new_account_and_tos return self.client.agree_to_tos(regr) File "/usr/lib/python2.7/site-packages/acme/client.py", line 292, in agree_to_tos regr.update(body=regr.body.update(agreement=regr.terms_of_service))) File "/usr/lib/python2.7/site-packages/acme/client.py", line 110, in update_registration updated_regr = self._send_recv_regr(regr, body=body) File "/usr/lib/python2.7/site-packages/acme/client.py", line 76, in _send_recv_regr response = self._post(regr.uri, body) File "/usr/lib/python2.7/site-packages/acme/client.py", line 95, in _post return self.net.post(*args, **kwargs) File "/usr/lib/python2.7/site-packages/acme/client.py", line 1185, in post return self._post_once(*args, **kwargs) File "/usr/lib/python2.7/site-packages/acme/client.py", line 1202, in _post_once response = self._check_response(response, content_type=content_type) File "/usr/lib/python2.7/site-packages/acme/client.py", line 1054, in _check_response raise messages.Error.from_json(jobj) Error: urn:acme:error:serverInternal :: The server experienced an internal error :: Unable to update registration 2019-06-07 21:57:08,404:ERROR:certbot.log:An unexpected error occurred: 2019-06-07 21:57:08,405:ERROR:certbot.log:The server experienced an internal error :: Unable to update registration /var/log/certbot/letsencrypt.log lines 130-185/185 (END) Does anybody have any idea what it all means? Yours, Puzzled -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 7