March 2014 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Install on RAID 1 with local disk and iscsi disk
by Paul Neuwirth 28 Mar '14

28 Mar '14

Hallo, as mentioned in another thread, i was going to install opensuse 13.1 64bit on several computers with root on a raid 1 containing a local disk's partition and an iscsi device. Unexpectedly installation using yast went very smooth, even initrd was build with suppoirt of iscsi and md (not so installing with nfsroot). But after reboot all machines stopped with following message: EXT4-fs (md0): unable to read superblock network, iscsi and md initiated correctly.. manually (using other install on nfsroot) have no problem to mount the filesystem: [ 25.567704] sd 0:0:0:0: [sda] Attached SCSI disk [ 26.632597] md: bind<sda2> [...] [57822.801442] Loading iSCSI transport class v2.0-870. [64709.632589] iscsi: registered transport (tcp) [64788.604030] scsi4 : iSCSI Initiator over TCP/IP [64788.859566] scsi 4:0:0:0: Direct-Access IET VIRTUAL-DISK 0 PQ: 0 ANSI: 4 [64788.860159] sd 4:0:0:0: Attached scsi generic sg1 type 0 [64788.862456] sd 4:0:0:0: [sdb] 16777232 512-byte logical blocks: (8.58 GB/8.00 GiB) [64788.862810] sd 4:0:0:0: [sdb] Write Protect is off [64788.862814] sd 4:0:0:0: [sdb] Mode Sense: 77 00 00 08 [64788.863471] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [64788.901751] sdb: sdb1 [64788.904286] sd 4:0:0:0: [sdb] Attached SCSI disk [64790.631288] md: bind<sdb1> [64790.729117] md: raid1 personality registered for level 1 [64790.736022] md/raid1:md127: active with 2 out of 2 mirrors [64790.736495] created bitmap (1 pages) for device md127 [64790.736808] md127: bitmap initialized from disk: read 1 pages, set 0 of 128 bits [64790.810062] md127: detected capacity change from 0 to 8588820480 [64790.810123] RAID1 conf printout: [64790.810127] --- wd:2 rd:2 [64790.810130] disk 0, wo:0, o:1, dev:sda2 [64790.810133] disk 1, wo:0, o:1, dev:sdb1 [64790.824947] md127: unknown partition table [65305.716042] EXT4-fs (md127): INFO: recovery required on readonly filesystem [65305.716047] EXT4-fs (md127): write access will be enabled during recovery [65306.420268] EXT4-fs (md127): recovery complete [65306.614832] EXT4-fs (md127): mounted filesystem with ordered data mode. Opts: (null) # cat /proc/mdstat Personalities : [raid1] md127 : active raid1 sdb1[1] sda2[0] 8387520 blocks super 1.0 [2/2] [UU] bitmap: 0/1 pages [0KB], 65536KB chunk unused devices: <none> what's gone wrong? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 13

[opensuse] kgpg busted
by James Knott 27 Mar '14

27 Mar '14

I tried running Kgpg today and it didn't run. Even when trying from the command line, it doesn't open and there is no error. I tried uninstalling/reinstalling, but it still fails. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 8

[opensuse] zypper DownloadAsNeeded option (was : zypper dup and free space)
by Dsant 27 Mar '14

27 Mar '14

On 03/25/2014 03:13 PM, Felix Miata wrote: > I have many installations with limited free space on /. With Fedora > this happens to me a lot. It never happens with openSUSE, because I > have this in /etc/zypp/zypp.conf: > > commit.downloadMode = DownloadAsNeeded > > Change yours, or use the corresponding cmdline option, and try again. Wonderful option ! 2 main advantages : - The network is used more smoothly. Instead of using 100% bandwidth and then 0% during rpm installations. - Most important for new users, the counter is updated during the whole process. Before, you had a message "1990/2000 (done)" , and when you reached the end, you had to spend about the same time for installation steep. Shouldn't it be the default ? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 6

[opensuse] Re: Post to opensuse@opensuse.org denied
by ianseeks 27 Mar '14

27 Mar '14

I think you need to add this to the list of reasons of rejection Cutting from an existing valid email and pasting into a new email. That is all i have done in this email so i think your rejection software needs refining or the Linux Opensusue 13.1/kde.4.12 cut and paste needs fixing On Friday 21 Mar 2014 14:15:31 opensuse+owner(a)opensuse.org wrote: > Hi, this is the mlmmj program managing the mailinglist > > opensuse(a)opensuse.org > > I'm sorry to inform you that your message could not be delivered to the > list. Your mail was rejected because it matched a rule set up by the > list administrator. > > This list does not allow: > > * Attachments > * Mails from other lists > * HTML mails (also multipart text/html!) > > If you think your mail does not violate these rules and was declined anyway, > contact the owner at: > > opensuse+owner(a)opensuse.org > > --- below this line the first 100 lines of the denied message ---> > X-Original-To: opensuse(a)lists4.opensuse.org > Delivered-To: opensuse(a)lists4.opensuse.org > Received: from relay1.suse.de (unknown [149.44.160.133]) > by lists4.suse.de (Postfix) with ESMTP id C009B8613CD > for <opensuse(a)lists4.opensuse.org>; Fri, 21 Mar 2014 14:15:30 +0000 (GMT) > Received: from localhost (localhost [127.0.0.1]) > by relay1.suse.de (Postfix) with ESMTP id BA97A25C88 > for <opensuse(a)lists4.opensuse.org>; Fri, 21 Mar 2014 14:15:30 +0000 (UTC) > X-Virus-Scanned: by amavisd-new at localhost > X-Spam-Flag: NO > X-Spam-Score: 0.702 > X-Spam-Level: > X-Spam-Status: No, score=0.702 tagged_above=-9999 required=5 > tests=[BAYES_50=0.8, DKIM_SIGNED=0.1, DKIM_VALID=-0.1, > DKIM_VALID_AU=-0.1, FREEMAIL_FROM=0.001, HTML_MESSAGE=0.001, > RCVD_IN_DNSWL_NONE=-0.0001] autolearn=disabled > Received: from relay1.suse.de ([127.0.0.1]) > by localhost (localhost [127.0.0.1]) (amavisd-new, port 10026) > with ESMTP id G4SbP_yk-twd for <opensuse(a)lists4.opensuse.org>; > Fri, 21 Mar 2014 14:15:30 +0000 (UTC) > Received: from mx2.suse.de (cantor2.suse.de [195.135.220.15]) > (using TLSv1 with cipher ADH-CAMELLIA256-SHA (256/256 bits)) > (No client certificate requested) > by relay1.suse.de (Postfix) with ESMTPS id 4B85025C86 > for <opensuse(a)lists4.opensuse.org>; Fri, 21 Mar 2014 14:15:30 +0000 (UTC) > Received: from nm18-vm5.bullet.mail.ir2.yahoo.com > (nm18-vm5.bullet.mail.ir2.yahoo.com [212.82.96.229]) (using TLSv1 with > cipher DHE-RSA-AES256-SHA (256/256 bits)) > (No client certificate requested) > by mx2.suse.de (Postfix) with ESMTPS id 21A8C75011 > for <opensuse(a)opensuse.org>; Fri, 21 Mar 2014 14:15:28 +0000 (UTC) > Received: from [212.82.98.53] by nm18.bullet.mail.ir2.yahoo.com with NNFMP; > 21 Mar 2014 14:15:27 -0000 Received: from [46.228.39.65] by > tm6.bullet.mail.ir2.yahoo.com with NNFMP; 21 Mar 2014 14:15:27 -0000 > Received: from [127.0.0.1] by smtp102.mail.ir2.yahoo.com with NNFMP; 21 Mar > 2014 14:15:27 -0000 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; > d=yahoo.co.uk; s=s1024; t=1395411327; > bh=e1meqpkC/NUYP9Gmx8u9ZvHmEhaDhBODwJpXmpCPl/A=; > h=X-Yahoo-Newman-Id:X-Yahoo-Newman-Property:X-YMail-OSG:X-Yahoo-SMTP:X-Rock > et-Received:From:To:Reply-To:Subject:Date:Message-ID:User-Agent:In-Reply-To: > References:MIME-Version:Content-Type:Content-Transfer-Encoding; > b=T4HytahiFrI4cztYvqhF2A1Mxy5XkSEMhaTjJ2r4tAg7BbWw5lSuESM0vcLXQ1EMXpzmMezZ9 > tV+ju3BxJsPVjpPSenSJvciKabo0EAKFVVES3IXz1Iqs6E3H81KnMXanqpZvGxRn4Mrjc2lLklxv > gViXj9p5W11yZPfUS5Coec= X-Yahoo-Newman-Id: > 809179.69754.bm(a)smtp102.mail.ir2.yahoo.com > X-Yahoo-Newman-Property: ymail-3 > X-YMail-OSG: Dr3YgagVM1my0qPIgnKEpW7uLpTNNeGhZc3U0iLeE1Ebn9Q > hVOOJc2oh6.19q8RS1Lrb9.o2VFI_Zg4c4qFJ3OHzsoAvxAcSvCA.dV59gj1 > DldjlQPsQTciqShV1BRkxM2m8wDUJVYm3YsRbvHXvHJkAaILYdlXQomQ_Wun > m78IPS8CwRv1JbNKESftzKokD_SOiqxnMAh7xVKHTSn9kH.PuIPCJqqMOi5P > H0GebwSmH4SL4Q8ZmPjdRZ3zvEkC.ixjZhp_.DANFhnciuVvqts.e.eoFgWl > vnYg0V7L6PTmK1KQVrw_pJXeLUnL5IyJCguaWARDoSsLdeDhIa5QJbVCj0Ty > m_ciuRCZ65gXWsVByMJ3lBU6jXL2D.L8RF5F3InndnlyFt.UL2VhRyjsQDQ9 > 18_DGY7rtzNqZeZ8HTb.RUMPtsDmTikzeK0ubq0Llcq30Bxi0OWRavQ2JWmd > fnHyu0QzBvkKyRRBvqzT8wujsi.szKvIUU3a15NAa0Tig.SoyDi.8aQF_L2P > txg-- > X-Yahoo-SMTP: R8u4.32swBBkB52FJ_wP.NdyvLyx > X-Rocket-Received: from lianli.site (ianseeks(a)86.159.104.183 with plain > [188.125.69.59]) by smtp102.mail.ir2.yahoo.com with SMTP; 21 Mar 2014 > 14:15:27 +0000 UTC From: ianseeks <ianseeks(a)yahoo.co.uk> > To: opensuse(a)opensuse.org > Reply-To: ianseeks(a)yahoo.co.uk > Subject: Re: [opensuse] install libqtgui4 > Date: Fri, 21 Mar 2014 14:15:27 +0000 > Message-ID: <4433896.9Vr7kkUnh1(a)lianli.site> > User-Agent: KMail/4.12.3 (Linux/3.11.10-7-desktop; KDE/4.12.3; x86_64; ; ) > In-Reply-To: > <284F531905A6F24A9079808303CAE729705E40DA(a)TORSR-DC1.smoothrunnings.local> > References: > <284F531905A6F24A9079808303CAE729705E40DA(a)TORSR-DC1.smoothrunnings.local> > Precedence: bulk > Mailing-List: contact opensuse+help(a)opensuse.org; run by mlmmj > X-Mailinglist: opensuse > List-Post: <mailto:opensuse@opensuse.org> > List-Help: <mailto:opensuse+help@opensuse.org> > List-Subscribe: <mailto:opensuse+subscribe@opensuse.org> > List-Unsubscribe: <mailto:opensuse+unsubscribe@opensuse.org> > List-Owner: <mailto:opensuse+owner@opensuse.org> > List-Archive: <http://lists.opensuse.org/opensuse/> > X-MIME-Notice: attachments may have been removed from this message > MIME-Version: 1.0 > Content-Type: multipart/alternative; boundary="nextPart1931382.KXN0dbZ2DS" > Content-Transfer-Encoding: 7Bit > > This is a multi-part message in MIME format. > > --nextPart1931382.KXN0dbZ2DS > Content-Transfer-Encoding: 7Bit > Content-Type: text/plain; charset="us-ascii" > > On Thursday 20 Mar 2014 21:53:27 Andrew English wrote: > > In order to use the binaries for bitcoin-qt 0.9.0 I need to install > > libqtgui4, when I do a sudo zypper install libqtgui4 it comes back with > > 'libqtgui4' not found in package names, but the package is available > > for > > > Debian or Ubuntu. > > Any ideas? > > The only one i have is: > > There is a script/program called "alien" that converts deb to rpm, > run "alien -r --scripts xxxx.deb" > > > The > > > > Take care, > > Andrew > > > > > > "Do not dwell in the past, do not dream of the future, concentrate the > > mind -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

12 47

[opensuse] Kinfocenter doesn't show IPv6 addresses
by James Knott 27 Mar '14

27 Mar '14

I was just looking in Kinfocenter and noticed that it doesn't show my IPv6 address, just the IPv4. Given that IPv6 is becoming more prevalent, perhaps this shortcoming should be addressed. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Re: (offlist)Re: Post to opensuse@opensuse.org denied
by ianseeks 27 Mar '14

27 Mar '14

On Monday 24 Mar 2014 18:36:15 Linda Walsh wrote: > ianseeks wrote: > >> I don't have kmail currently configured, so I can not try to reproduce. > >> Others can try. > > > > i've logged a bug 332522 - lets see if anyone looks at it. > > --- > Awesome!... Glad at least the didn't manage to convince > us that it was the user's fault again... > > (that's what I usually get for doing anything they haven't > tested...sigh) such is life in the open source world. i do feel bad when complaining about software faults when the the coding/testing has been done altruistically, oh to win the lottery and set up a KDEPIM coding team to fix and improve and help some of the coders that give their time for free and pay them. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] trying to upgrade lvm2 tools
by Per Jessen 27 Mar '14

27 Mar '14

On openSUSE 12.3, lvm2 was built without '--with-thin=internal' to enable thin provisioning. Sometime after 12.3, the package spec was updated to build with this option. I wanted to see if updating to the package from 13.1 would do the trick: # rpm --upgrade --test lvm2-2.02.98-0.28.14.1.x86_64.rpm package lvm2-2.02.98-20.2.1.x86_64 (which is newer than lvm2-2.02.98-0.28.14.1.x86_64) is already installed "which is newer" ?? -- Per Jessen, Zürich (6.8°C) http://www.hostsuisse.com/ - dedicated server rental in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] public_html security
by lynn 27 Mar '14

27 Mar '14

13.1 Hi We've a php script which writes to the users public_html folders, so wwwrun needs w. I used setfacl to grant the write. The alternative is to stick it in the db. I'd prefer the former. Any problems with that? Thanks -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 16

[opensuse] nginx uid:gid
by lynn 27 Mar '14

27 Mar '14

13.1 Hi We have a nginx test going. Yast created a uid:gid, nginx:nginx Is that if you are running apache at the same time? If we go live, is there any reason nginx shouldn't run as: wwwrun:www ? Thanks -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 4

[opensuse] problem with ROOT from openSUSE repositories
by John Young 26 Mar '14

26 Mar '14

Hello, We have some folks here at NASA Langley that want to start using ROOT, so I have installed it on some of our Linux machines from the openSUSE Science repositories. We have version 5.34.17 installed. The installation seems to have completed successfully, but we are having problems running some of the examples in the documentation, as below: % root ******************************************* * * * W E L C O M E to R O O T * * * * Version 5.34/17 24 February 2014 * * * * You are welcome to visit our Web site * * http://root.cern.ch * * * ******************************************* ROOT 5.34/17 (heads/v5-34-00-patches@v5-34-15-60-gba875ed, Mar 07 2014, 11:10:00 on linuxx8664gcc) CINT/ROOT C/C++ Interpreter version 5.18.00, July 2, 2010 Type ? for help. Commands must be C++ statements. Enclose multiple statements between { }. root [0] fa1 = new TF1("fa1","sin(x)/x",0,10); Error: Symbol TF1 is not defined in current scope (tmpfile):1: Error: type TF1 not defined FILE:(tmpfile) LINE:1 Warning: Automatic variable fa1 is allocated (tmpfile):1: Error: Undeclared variable fa1 (tmpfile):1: *** Interpreter error recovered *** root [1] exit() (const int)0 % I have tried searching the web for the solution to this problem, but I have not come up with anything useful so far. Since I installed this software from RPMs, I did not configure it myself, so I am not sure what environmental variables need to be set. I have tried setting ROOTSYS to /usr/bin, which is where the RPM puts the 'root' executable, and I am guessing that LD_LIBRARY_PATH should include /usr/lib64/root/5.34/ which seems to be where the RPM put the libraries, but so far, I have not gotten past the above error. Is anyone else out there using the openSUSE Science repository version of root? Any suggestions? JY -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1