March 2013 - openSUSE Users - openSUSE Mailing Lists

[opensuse] FreeCAD 0.13 / OpenSuSE 12.3 Problem - Missing Modules
by andreil1 18 Mar '13

18 Mar '13

Hi, I have installed FreeCAD 0.13 (from repository) on OpenSuSE 12.3. Installation went smooth, all dependencies were resolved. However, launch of FreeCAD 0.13 is only partial success, shell is loaded, it immediately gives error message "No module named StartGUI". Workbench -> New -> … always throws the same type of error, for example Workbench -> New -> Arch - "No module named Drawing". Anyone have any clue what might be wrong ? Thanks in advance. Andrei-- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Cinelerra for 12.3
by Basil Chupin 18 Mar '13

18 Mar '13

Anyone using Cinelerra and has found a copy which will install in 12.3? If so could you let me know the URL, please. Or if you know what is happening with such a version then please also let me know. I need Cinelerra :-( . BC -- Using openSUSE 12.3 x86_64 with KDE 4.10.1 & kernel 3.8.2-2 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 10

[opensuse] Panel in 12.3
by James Knott 18 Mar '13

18 Mar '13

I just upgraded to 12.3 on my main system. One thing I've noticed is the Panel is now d@mn ugly. Can anything be done to change it's appearance? It's almost enough to make me go back to 12.2. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 3

[opensuse] What happened to sysinfo:/
by James Knott 18 Mar '13

18 Mar '13

In 12.2 & earlier I could open sysinfo:/ in Konqueror to see stuff about mounts etc. What happened to this is 12.3? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 14

[opensuse] Fontconfig warning: file:line Having multiple <XXXXX> isn't supported and may not work as expected
by Linda Walsh 18 Mar '13

18 Mar '13

I get a bunch of errors when running gvim with the new fontconfig libs from either 12.3 or factory. Looks like some other lib is out of sync with the fontconfig prog... any ideas? Fontconfig warning: "/etc/fonts/conf.d/21-ipa-hinting.conf", line 11: Having multiple values in <test> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/30-metric-aliases.conf", line 84: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/40-nonlatin.conf", line 79: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/45-latin.conf", line 23: Having multiple <family> in <alias> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/50-suse-pre-user.conf", line 22: Having multiple values in <test> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/suse-hinting.conf", line 61: Having multiple values in <test> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/suse-bitmaps.conf", line 95: Having multiple values in <test> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/infinality/conf.d/41-repl-os-linux.conf", line 16: Having multiple values in <test> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/infinality/conf.d/60-group-non-tt-fonts.conf", line 483: Having multiple values in <test> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/infinality/conf.d/62-tt-monospace-rendering.conf", line 27: Having multiple values in <test> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/infinality/conf.d/62-tt-traced-bitmap-rendering.conf", line 21: Having multiple values in <test> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/infinality/conf.d/80-selective-rendering-inf-win-lin.conf", line 16: Having multiple values in <test> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/57-wqy-zenhei.conf", line 11: Having multiple values in <test> isn't supported and may not work as expected Fontconfig warning: "/etc/fonts/conf.d/58-suse-post-user.conf", line 191: Having multiple values in <test> isn't supported and may not work as expected -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] How do I install postfix without deselecting minimal-base-conflicts?
by Per Jessen 18 Mar '13

18 Mar '13

postfix got left out of the minimal-server selection, and if I try to select it during installation and I deselect minimal-base-conflicts, I get a whole slew of other (unwanted) packages. I can no doubt install postfix afterwards with zypper, but why not during the initial install? -- Per Jessen, Zürich (7.6°C) http://www.dns24.ch/ - free DNS hosting, made in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] Power button always shuts down the system
by Fabian Scheler 18 Mar '13

18 Mar '13

Hi openSUSE-folks, for quite some time I was convinced that hibernation is broken on my system (openSUSE 12.2/12.3 x64, Dell Latitude E6220) but now I found out that just no "suspend to disk" was initiated when pressing the power button, but the system just was shut down. Calling pm-hibernate or s2disk via the shell works fine. In the power management plasmoid I configured that the system should be hibernated when the power button is pressed, I also disabled the global short cut that points to a "power off" action. However, none of this improved the situation. After spending some time with google I finally found the acpi-script handling the power button events: /usr/lib/acpid/power_button. Inside this script the enviroment variable $POWER_BUTTON_HOOK is checked and apparently it should contain the KDE-specific hook that KDE uses to handle such events. This variable however is not set on my system and thus the system is shut down by this script. Where should this variable be set and what is the correct value for KDE? Ciao, Fabian -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1

[opensuse] email problems
by eddie 18 Mar '13

18 Mar '13

Hi I've upgraded to opensuse 12.3. Everything so far seems to be okay except my email. I can send and receive messages to my imap server but am not able to retrieve anything from the various pop servers, gmail, hotmail etc. Does anyone have any idea how I can solve this or how I can begin to track down what is going wrong? Had no problem retrieving mail from the pop servers before the upgrade. Oh and I did an upgrade rather than a fresh install. Thanks in advance. Eddie -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 11

[opensuse] yast errors in 12.3
by Anton Aylward 18 Mar '13

18 Mar '13

I'm getting a lot of errors when tying to use the yast tool in GUI Mode under xfce4 with 12.3. Mostly they look like this. ** (y2base:3670): WARNING **: Error retrieving accessibility bus address: org.freedesktop.DBus.Error.ServiceUnknown: The name org.a11y.Bus was not provided by any .service files YaST got signal 11 at YCP file PackagesUI.ycp:301 /sbin/yast2: line 431: 3670 Segmentation fault $ybindir/y2base $module "$@" "$SELECTED_GUI" $Y2_GEOMETRY $Y2UI_ARGS QGtkStyle was unable to detect the current GTK+ theme. Qt: Session management error: Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed That looks like a configuration problem - perhaps I have a theme not loaded, perhaps I shouldn't be running this under xfce4, perhaps I need a tweak of PAM ... perhaps .. perhaps .. Before I go screaming "Bug! Bug! Bug! Fix It Now!", lets find out if it is a bug or if its an omission on the part of Anton. OBTW: I can reproduce this in a number of ways, but the most common is where a package I'm removing has dependencies and I get the pop-up offering options 1,2,3. The second most common is when deleting packages and having selected some I press "Accept" -- The real problems of the world is not unanswered questions but unquestioned answers. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] HTML Editor recommendation - in openSuse repositories
by Anton Aylward 17 Mar '13

17 Mar '13

In the past I've used Nvu and Arachnophilia, which I liked, Bluefish which I was ambiguous about and Komposer which I didn’t like mostly because it was unstable and Quanta, which I thought was overkill. Does the community have any recommendations for a HTML editor that I might use with KDE Baskets? Please note: that context. Not web site development. -- As I did so I struck against an elderly, deformed man, who had been behind me, and I knocked down several books which he was carrying. I remember that as I picked them up, I observed the title of one of them, _The Origin of Tree Worship_, and it struck me that the fellow must be some poor bibliophile, who, either as a trade or as a hobby, was a collector of obscure volumes. -- Watson, in "The Adventure of the Empty House" -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

10 22