March 2009 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Re: Firefox 3.0.7 "Add Exception" dialog not works more [SOLVED]
by Alexander R 22 Mar '09

22 Mar '09

Hm, i've uninstall all *mozilla* packages and install them yet time. now all works..... strange On Sun, Mar 22, 2009 at 5:21 PM, Alexander R <aleromex(a)gmail.com> wrote: > Hello list, > > As i think, after update my box from opensuse 11.0 to opensuse 11.1, > the firefox stops open "Add Exception..."/"Get me out of here!" dialog > when I try visit self-signed web site. > But in fresh installed opensuse 11.1 it's work fine. > > My system: > opensuse 11.1 x64 > Firefox 3.0.7 x64 > > Where is I can configure something? > Thanks > -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Firefox 3.0.7 "Add Exception" dialog not works more
by Alexander R 22 Mar '09

22 Mar '09

Hello list, As i think, after update my box from opensuse 11.0 to opensuse 11.1, the firefox stops open "Add Exception..."/"Get me out of here!" dialog when I try visit self-signed web site. But in fresh installed opensuse 11.1 it's work fine. My system: opensuse 11.1 x64 Firefox 3.0.7 x64 Where is I can configure something? Thanks -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] 11.1 in graphics mode not installable on Intel 845G onboard graphics
by pft 22 Mar '09

22 Mar '09

Hi, I'd like to report an assumed bug in graphics support for Intel onboard braphics 845G in opensuse 11.1 I am not an experience beta-tester (actually not a beta-tester at all) so I'd like to avoid writing formal bug report. However being a moderator in a german forum on opensuse I checked quite carefully including help from my co-moderators so there is some confidence. I can also give some support on locating the bug if given some guidance :-) So what is it? Whenever I try to install with any of the usual options (acpi, local apic, secure settings), everything goes fine until the final hardware setup which crashes. Installing into text mode, loading graphics support and starting "sax2 -a" manually consistently revealed this error in yast.99.log: "intel_bufmgr_fake.c:392: Error waiting for fence: Device or resource busy." There is no additional HW plugged to the boards, just onboard features. The board is a Fujitsu Siemens Computers Board with a P4. To allow some hardware identification, here is output of "lspci": 00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 01) 00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01) 00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 81) 00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01) 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01) 02:08.0 Ethernet controller: Intel Corporation 82801DB PRO/100 VM (LOM) Another poblem I notice lately is that initialization is obviously incomplete. That is if I do a reboot from Window to Linux I ge no suitable signal but an "out of range" message from my monitor. Only if I shut down completely from windows and then restart it works fine. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

5 6

[opensuse] what does this updater message mean?
by Daniel Bauer 22 Mar '09

22 Mar '09

Hi, Opensuse updater wants to update "hal dbus configuration" to 6098-0 (on 10.3/KDE 3.5, up-to-date, except this one). The details about this update say: "The dbus package used a too permissive configuration. Therefore intended access control for some services was not applied (CVE-2008-4311). The new configuration denies access by default. Some dbus services may break due to this setting and need an updated configuration as well." I'm not sure if I understand what this wants to tell me: will I have to udate any configuration myself (manually?) after this update, or *is* this update already the new configuration? If I have to configure anything manually: what? how? Can this update break my WLAN/Knetworkmanager (which already is more than problematic on 10.3)? thanks for making this clear to me... Daniel -- Daniel Bauer photographer Basel Barcelona professional photography: http://www.daniel-bauer.com erotic art photos: http://www.bauer-nudes.com Madagascar special: http://www.fotograf-basel.ch/madagascar/ -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 2

Re: [opensuse] 11.0 Network Manager Update Completely Breaks Wireless
by David C. Rankin 22 Mar '09

22 Mar '09

Ed Dober wrote: > I was about to perform the same dbus,ConsoleKit updates when I saw this > mail > just in time. Thanks > > > At 06:23 PM 3/18/2009, you wrote: >> David C. Rankin wrote: >> > Oddball wrote: >> >> David C. Rankin schreef: >> >>> Listmates, >> >>> >> >>> The network manager update completely broke my ability to >> connect through my >> >>> wireless adapter on my laptop. The network manager will not even >> try to get an >> >> >> > The problem is that someone totally *borked* dbus and >> ConsoleKit for x86_64 in >> > the latest 'updates' in 11.0. The cure is to roll-back to the prior >> versions. >> > for 11.0 x86_64, the packages required are: >> > >> > 14:56 alchemy:~/linux/openSuSE/fu> ls -1 inst/ >> > ConsoleKit-0.2.10-14.2.x86_64.rpm >> > ConsoleKit-32bit-0.2.10-14.2.x86_64.rpm >> > ConsoleKit-x11-0.2.10-14.2.x86_64.rpm >> > dbus-1-1.2.1-15.2.x86_64.rpm >> > dbus-1-32bit-1.2.1-15.2.x86_64.rpm >> > dbus-1-devel-1.2.1-15.2.x86_64.rpm >> > dbus-1-x11-1.2.1-18.2.x86_64.rpm >> > >> >> > >> >> >> >> Bug opened, see: https://bugzilla.novell.com/show_bug.cgi?id=486624 >> Ed, You can go ahead and safely update dbus and ConsoleKit *as long as* you have *not* used the openSuSE Build Service KDE:Backports to update NetworkManager. The NetworkManager in "Backports" is incompatible with online update release of dbus of ConsoleKit. -- David C. Rankin, J.D.,P.E. Rankin Law Firm, PLLC 510 Ochiltree Street Nacogdoches, Texas 75961 Telephone: (936) 715-9333 Facsimile: (936) 715-9339 www.rankinlawfirm.com -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] getting new laptop
by kanenas＠hawaii.rr.com 22 Mar '09

22 Mar '09

i will be buying a new laptop in a week or so. In stage 1 I hope to run a dual boot system, some windoze version and then suse 10.3, probably 32 bit but that's not final, the 64 bit ver is not only faster, but it is approaching the 100% compatibility mark. no, thanks, i will not try 11.0 or 11.1 yet, i need a kde that has *no* hooks to kde4 until at least kde 4.4 as they mark them, but let's not digress. In stage 2 I hope to run suse 10.3 as the base system, then the plan is to load up vmware and run 2 or 3 virtual oss'es, and to include the "default" windoze partition as a vmware option. The plan is to Buy a core-duo from Dell or ibm/lenovo. 2.4 ghz plus, 4 gb ram, 300-500 gb hard drive, wifi. since there will be graphics involved, i might even go to a 17" lcd. blue ray read a possibility, but definitely not a must have. I am not scared of ati drivers, have installed a few with direct ati downloads (the trick really is to *reboot* right after running an aticonfig:)), so I ask the group what other pitfalls might I want to avoid. thanks in advance, d. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

10 13

[opensuse] eeePC 1000HE 11.1 tapping
by Bob Ewart 22 Mar '09

22 Mar '09

I've installed openSUSE 11.1 on my ASUS eeepc 1000HE with the KDE 3.5 desktop and tried all the suggestions to turn off tapping. My xorg.conf has: ... Section "InputDevice" Driver "mouse" Identifier "Mouse[1]" Option "Buttons" "5" Option "Device" "/dev/input/mice" Option "Name" "ImPS/2 Logitech Wheel Mouse" Option "Protocol" "explorerps/2" Option "Vendor" "Sysp" Option "ZAxisMapping" "4 5" EndSection ... I tried adding Option "MaxTapTime" "0" and/or Option "SHMConfig" "on" but tapping still happened and gsynaptics complained about SHMConfig not being on. I tried setting the mouse via sax2 to a synaptics device and got no mouse action at all. I even tried adding the synaptics input device as Mouse[0] along with the above and added SHMConfig and MaxTapTime to both. The touchpad worked, but tapping was still happening. Has anyone gotten tapping turned off on a touchpad with openSUSE 11.1? -- Bob -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] Re: How to play embedded media in openoffice?
by jdd 21 Mar '09

21 Mar '09

Marcelo Magno T. Sales a écrit : > Strange, the powerpoint file indeed played sounds, but the odp one did > not :/ same for me, and I can save the ppt file to odp and play it after reloading, but not the original odp notice that openoffice is *not* able to play all what can play the power point free viewer and it's I shame, I know several people that use to exchange stupid powerpoint "seetees" that Ooo can't play! so they insist using vista... (beginning by my mother, that else prefers openSUSE) jdd -- http://www.dodin.net http://valerie.dodin.org http://www.youtube.com/watch?v=t-eic8MSSfM http://www.facebook.com/profile.php?id=1412160445 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] How to play embedded media in openoffice?
by Marcelo Magno T. Sales 21 Mar '09

21 Mar '09

Hi, I'm trying to setup openoffice in openSuSE 11.1 to make it play embedded media (sounds and videos) in presentations, but can't make it work. fmj is installed, but no sound is heard. How do I make this work? Thanks, Marcelo -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 3

[opensuse] Boot log message Question
by russbucket 21 Mar '09

21 Mar '09

I find this message at the start of the boot log. Inspecting /boot/System.map-2.6.27.19-3.2-default Cannot find map file. No module symbols loaded - kernel modules not enabled. Cannot build symbol table - disabling symbol lookups klogd 1.4.1, log source = ksyslog started. Here's the results of ls -l System.map-2.6.27.19-3.2- default from within /boot. -rw-r--r-- 1 root root 1419357 2009-02-25 08:22 System.map-2.6.27.19-3.2-default I have the kernel -default, base, extra and docs, kernel- source, kernel- symbols rpms installed. (2.6.27.19-3.2.1- x86_64) Is there something else I need to install. One hit on SUSE Forum implies this is normal. Is It? How do I get the symbols installed so I can do back traces? Thanks for any information. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 2