July 2007 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Adobe flash player updates in opensuse repo
by Sunny 16 Jul '07

16 Jul '07

Hi, I just read this slashdot article: http://it.slashdot.org/article.pl?sid=07/07/16/156233&from=rss Checking on Adobe site, they have linux version release on July 10 - ver. 9.0.48.0. On my 10.2 installation I have added the mozilla repository at: <http://software.opensuse.org/download/mozilla/openSUSE_10.2/> But the version there is rather old: 9.0.31.0, which is from sometime January 2007. Is there some other repository, which keeps current with the latest versions of flash player? I would prefer to install package specifically build for opensuse, than the generic one from adobe's site. Cheers -- Svetoslav Milenov (Sunny) Even the most advanced equipment in the hands of the ignorant is just a pile of scrap. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] Email, suse, and ipv6 name resolution curiosity.
by Carlos E. R. 16 Jul '07

16 Jul '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, Last Tuesday I got a delay notice triggered by an email I sent to the list. That's unimportant, but while looking at it I saw this header: Received-SPF: none (Address does not pass the Sender Policy Framework) SPF=HELO; sender=lists4.suse.de; remoteip=::ffff:195.135.221.135; remotehost=lists4.suse.de; helo=lists4.suse.de; receiver=exa.billmerriam.com; I noticed the ipv6 address, and I was curious to check who it was: cer@nimrodel:~> host "::ffff:195.135.221.135" Host 7.8.d.d.7.8.3.c.f.f.f.f.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa not found: 3(NXDOMAIN) Huh? I then checked the ipv4 part: cer@nimrodel:~> host 195.135.221.135 135.221.135.195.in-addr.arpa domain name pointer lists4.suse.de. Clearly the address does exist. Now, who/what is to blame about the ipv6 counterpart? Guesses: - Linux's 'host' program is not yet ipv6 aware. - Linux's 'named' daemon is not yet ipv6 aware, or not configured properly - Ditto dns servers worldwide, or at suse, not yet ipv6 aware or not configured properly - Human (ie, my) error. - -- Cheers, Carlos Robinson -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Made with pgp4pine 1.76 iD8DBQFGl+RDtTMYHG2NR9URAsV9AJ90eajQwzA7R+7DnnCPHt7sZJkNagCgiTTx 27b6CjJkuD9QY8LxSkaQ1Iw= =ncLz -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

6 12

[opensuse] How to auto-delete trash
by Kai Ponte 16 Jul '07

16 Jul '07

One of the (few) things I miss about wintendo is the auto-delete of trash. I'll often find my disk is getting full and have to go deleting the trash can. I've looked and cannot find any method that makes sense to me. Is there a way to have the trash auto-delete after it reaches x% of the total free disk space? I see cron jobs to delete every x time period. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] login question.
by Giorgos 16 Jul '07

16 Jul '07

Hi! :-) Does someone know, how can I login as su (root)? I'm autologging in as normal user, and when I have to do administrative tasks (eg. configuring with yast), opensuse asking me, my pwd. These days, I have to install some devices and their drivers, so I have to copy-paste files to restrictive directories. Not surprisingly, those options (eg. pasting files) are greyed-out and not functional. However, working with bash is always available. Once I'm giving my pwd (and returning to # mode), I can complete my work without any problems or pwd reconfirmations. I'm just wondering if there is a similar way, for working with graphical shell (either with Gnome (which I'm using) or any other), for copy-pasting. I had to do so much keyboarding from the DOS era! :-) THANKS!!! Giorgos. :-) -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

5 4

[opensuse] searching for and installing a package
by Denis 16 Jul '07

16 Jul '07

2007/7/13, Dave Howorth <dave(a)howorth.org.uk>: > On Fri, 2007-07-13 at 23:27 +0200, Jos van Kan wrote: > > Denis wrote: > > > People, how can I search for g77 compiler and isntall it? > > > > > > The packages for opensuse Runs on enterprise server? > > > > > > > > > Tanx. > > > > > > > > > Exist any way to make a search for a package by a file that I know > > > that should be in the packege, but I dont know the name of the > > > package? > > > > There is a utility named "pin" that does just that. On my 9.3 system I get > <snip> > > The other thing to bear in mind is that according to previous > conversations on this list, g77 no longer exists. It has been replaced > by gfortran. So searching the archive and/or web for more details might > be useful depending what version of Suse you're running. > > Cheers, Dave > > -- > To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org > For additional commands, e-mail: opensuse+help(a)opensuse.org > > Dave, I look for g77 in opensuse lists and found somethings. I saw that gfortran is now working instead g77 but I saw that some people have trouble to migrate de source code for compiling well in gfortran. I have not much experience on compiling nor programming. I just administer a server that a user wanna compile a program called Corsika and its code is so old. And a lot big. He told me that could be very worse to migrate the code. I saw that I can use the compat-g77 package, but I could not find the package. Do U know where can I download it? Sorry my inexperience and my poor english. =) Denis Anjos. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] searching for and installing a package
by Denis 16 Jul '07

16 Jul '07

People, how can I search for g77 compiler and isntall it? The packages for opensuse Runs on enterprise server? Tanx. Exist any way to make a search for a package by a file that I know that should be in the packege, but I dont know the name of the package? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 3

[opensuse] Setting Kmail to run message filters automatically
by Adam Jimerson 16 Jul '07

16 Jul '07

Is there a way to get Kmail to run message filters automatically instead of having to run them myself?

2 2

Re: [opensuse] Windows don't wobble
by primm 16 Jul '07

16 Jul '07

On Sunday 15 July 2007 09:56, Fernando Costa wrote: > Hi, > > Not a big issue but I like the effect, I have activated the desktop > effects and all are working fine except that windows don't wobble when > you drag them, I use openSUSE 10.2 with KDE 3.5.7 and nVidia drivers.... > > Thanks in advance for your help, This is probably what you want: http://en.opensuse.org/Beryl It has wobbly windows and loadsa other fun stuff too. hth Steve. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 3

[opensuse] snmpd: Error opening specified endpoint
by David Barr 16 Jul '07

16 Jul '07

OpenSuSE 10.2 + updates net-snmp-5.4.rc2-4 /etc/init.d/snmpd start gives a successful start indication, but /var/ log/net-snmpd.log says Error opening specified endpoint "161" Server Exiting with code 1 I tried modifying the endpoint: Error opening specified endpoint "161@eth-id-00:0b:db:83:95:0e" Server Exiting with code 1. Has anyone hit this and figured out the problem? Searching on the error message hasn't got me much. Thanks! David -- David - Offbeat http://dafydd.livejournal.com dafydd - Online http://pgp.mit.edu/ Battalion 4 - Black Rock City Emergency Services Department Integrity*Commitment*Communication*Support ----5----1----5----2----5----3----5----4----5----5----5----6----5----7-- Failure is not an option. It comes bundled with the software. --unknown -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Re: dictionary attacks
by Joachim Schrod 16 Jul '07

16 Jul '07

G T Smith wrote: >> >> Then I can recommend fail2ban, >> http://www.fail2ban.org/wiki/index.php/Main_Page >> It works for several log files, not just for ssh. > > DenyHosts looks like another way of shooting oneself in the foot. It is > a naive approach with the potential that a spoofed dictionary attack > could end up blocking of large chunk of address space (or a particular > address) from accessing your server, effectively allowing yourself to > create your own vector for a kind of DoS attack. (I would be rather > surprised if this had not been attempted already). You're right and it should also be noted that many tools have a rather poor log parsing routine, where one can run insertion attacks rather easily against them. fail2ban up to version 0.8 was also vulnerable to that. http://www.ossec.net/en/attacking-loganalysis.html is a very nice presentation of that problem. One can forgive the author that he touts his own horn, the OSSEC Host Intrusion Detection System (HIDS). But for many small installations, OSSEC or other HIDSes is too big a hammer, IMHO. Joachim -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Joachim Schrod Email: jschrod(a)acm.org Roedermark, Germany -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Slow Motion KDE Open Folder Animation
by Ken Jennings 16 Jul '07

16 Jul '07

openSUSE 10.2, 2.6.18.8-0.3-default x86_64 KDE 3.5.5 "release 45.5" When Konqueror opens a folder there's a short animation of an expanding box drawn with a dashed line superimposed over the icon. On most systems it plays too fast for most people to really see it. On this particular system it plays in slow motion. I can see the box and watch it expanding in discrete steps -- tick, tick, tick -- before the folder opens. It does not matter if the folder has 0 files in it or a hundred files. It still takes just as long to open. (three or four seconds.) Is there something I can do to control this animation, or even just turn it off? Thanks, Ken. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 4

[opensuse] update kernel via yast
by Hans Linux 16 Jul '07

16 Jul '07

how do i update opensuse10.2 kernel via Yast? is it risky to update kernel since i dont know much about linux? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 3

[opensuse] Re: dictionary attacks
by Joachim Schrod 16 Jul '07

16 Jul '07

koffiejunkie wrote: > Matthew Stringer wrote: >> After having a similar problem I was recommended DenyHosts, swear by >> it now, blocks all these lamers. >> >> http://www.howtoforge.com/preventing_ssh_dictionary_attacks_with_denyhosts >> > I'll vote for this too, although I would like to get something that uses > iptables instead - taking the load off sshd. But denyhosts works pretty > good. Then I can recommend fail2ban, http://www.fail2ban.org/wiki/index.php/Main_Page It works for several log files, not just for ssh. It does also proper unblocking automatically, otherwise the deny-list tends to get very long. (You have very seldomly attacks from the same IP address several times.) It only falls short when the ssh-login host is in a DMZ, the logs are actually stored and processed on a different host, and the firewall is a 3rd system. But even though I once thought that this is the canonical secure setup, this situation seems to be quite rare; I don't see requests for an SSH-blocker in that scenario. Joachim -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Joachim Schrod Email: jschrod(a)acm.org Roedermark, Germany -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] How can I tell susefirewall not to log about a certain port?
by Carlos E. R. 16 Jul '07

16 Jul '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, In the /etc/sysconfig/SuSEfirewall2 file I have: FW_SERVICES_EXT_TCP="4662" But entries to that port are logged: Jul 15 14:07:25 nimrodel kernel: SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:40:f4:2e:b1:21:00:30:da:70:d7:ea:08:00 SRC=189.... DST=192.168.1... LEN=48 TOS=0x00 PREC=0x00 TTL=112 ID=6454 DF PROTO=TCP SPT=50867 DPT=4662 WINDOW=64240 RES=0x00 SYN URGP=0 OPT (0204058401010402) As it is a port I opened, I understand it should not be logged, it is not a "critical" port. I have: FW_LOG_DROP_CRIT="yes" FW_LOG_DROP_ALL="yes" FW_LOG_ACCEPT_CRIT="yes" FW_LOG_ACCEPT_ALL="no" What could I do so that they are not logged? I want other ports logged, but not those I explicitly opened myself. In other words, I want to the firewall to consider 4662 as "not critical". - -- Cheers, Carlos Robinson -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Made with pgp4pine 1.76 iD8DBQFGm2HDtTMYHG2NR9URAkHkAJ9z9oamb3bh3F/wKTkGLaBGDuC8gACgl9XT lc16ibdI+ISQvsUvAMc9Zpo= =bE6d -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

Re: [opensuse] konqueror browser [SOLVED]
by Gavin Chester 16 Jul '07

16 Jul '07

On Sun, 2007-07-15 at 07:29 +0200, Raymond wrote: > On Sunday 15 July 2007 06:02:29 you wrote: > > On Sat, 2007-07-14 at 20:30 -0400, Michael Derek Barnett wrote: > > > -----BEGIN PGP SIGNED MESSAGE----- > > > Hash: SHA1 > > > > > > Gavin Chester wrote: > > > > I know this is a shot in the dark for you all, but I am at a loss > > > > completely ... > > > > > > > > No matter what settings I try I can't get konqueror to connect to the > > > > web. No problems with any other browser or transfer process, just > > > > konqueror. -SNIP- > Yet Another Shot In The Dark > > I have found that knetworkmanager blocks konqueror and kde apps from internet > access. If this is the case, quiting knetworkmanager using its systemtray > entry or killing it allow normal internet access once again. Alternatively, > setting your network interfaces in Yast to "User controlled with Network > Manager" may also solve the problem. > > Best of luck! > > Raymond BRILLIANT deduction, Raymond!! :-) :-) That was it. In the first instance, I simply shut down knetworkmanager and then konqueror was instantly able to load web pages as normal. FANTASTIC. It's a double-edged sword having all kde's app integration. Much appreciation to all who quickly and ably contributed suggestions to my problem that I had given up on before. Great work. Gavin -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] sensors.conf -Help !
by Bob S 15 Jul '07

15 Jul '07

Hello SuSE people, Been trying to get my sensors.conf file to report accurately on my system. got most of it squared away except for two alarm conditions. In the second column of the 3.3V line it shows +0.45V. The -12V line shows +0.80V. Why is that? Are they supposed to be the actual voltages? That is not what the bios reports. Anyone straighten me out here? Here is the output of sensors. EasyStreet:/ # sensors w83627thf-isa-0290 Adapter: ISA adapter VCore: +1.54 V (min = +0.70 V, max = +1.87 V) +12V: +12.28 V (min = +10.82 V, max = +13.19 V) +3.3V: +0.45 V (min = +3.14 V, max = +3.47 V) ALARM +5V: +5.09 V (min = +4.75 V, max = +5.25 V) -12V: +0.80 V (min = -13.18 V, max = -10.80 V) ALARM V5SB: +5.13 V (min = +4.76 V, max = +5.24 V) VBat: +3.62 V (min = +2.40 V, max = +4.08 V) Sys Fan: 3199 RPM (min = 2800 RPM, div = 2) CPU Fan: 5672 RPM (min = 5487 RPM, div = 2) M/B Temp: +46°C (high = +70°C, hyst = +2°C) sensor = thermistor CPU Temp: +33.0°C (high = +80°C, hyst = +75°C) sensor = diode temp3: -48.0°C (high = +80°C, hyst = +75°C) sensor = thermistor alarms: beep_enable: Sound alarm enabled EasyStreet:/ # Bob S. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 3

[opensuse] HOWTO Documents for openSUSE aka HOWTOFORGE
by Hylton Conacher (ZR1HPC) 15 Jul '07

15 Jul '07

Hi, I am a subscriber of http://www.howtoforge.com/ and receive a regular newsletter with articles on how to accomplish certain tasks on a Linux system ie 'Installing Zabbix (Server And Agent) On Debian Etch'. What I have not seen is any articles on doing things on a SUSE/openSUSE system and I wonder why? Whilst I am sure te documents are available on the web, I do not know where and wonder if Novell is keeping those sort of documents locked up :) Anyone? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 4

[opensuse] tool to convert .shn files to .mp3
by Matthew Stringer 15 Jul '07

15 Jul '07

Hi, I'm looking for a command line tool that'll (preferably batch) convert audio files in the shorten format (.shn) into MP3 format. Anyone know of such a thing? Cheers Matthew -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 3

[opensuse] Can't get the OpenSuse 10.2 64 disc to run
by John Meyer 15 Jul '07

15 Jul '07

I have an AMD 64 Athelon which can run the 32 bit version of OpenSuse perfectly, but when I boot up from the 64 disc and select install, the screen goes black and stays there. Am I missing something? Or does AMD 64 not mean that it's a 64 bit processor? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

5 4

[opensuse] Apache SSL not working after adding IP and port to listen.conf
by James D. Parra 14 Jul '07

14 Jul '07

Hello, I added a new ssl vhosts entry, using a template from a working ssl vhost and modified it appropriately or so I thought since the other ssl vhosts that are on the system are working correctly, however when I reload rcapache2 I get the following error; >From .../apache2/error_log; [error] (EAI 2)Name or service not known: Cannot resolve host name 10.50.40.258 --- ignoring! ~~~~ When I add the IP to listen.conf and attempt to reload, apache fails to load with the following error: <snip> rcapache2 reload; ... [crit] (EAI 2)Name or service not known: alloc_listener: failed to set up sockaddr for 10.50.40.258 Syntax error on line 25 of /etc/apache2/listen.conf: Listen setup failed The command line was: /usr/sbin/httpd2-prefork -f /etc/apache2/httpd.conf -DSSL unused <snip> This is a portion of listen.conf. <snip> Listen 80 <IfDefine SSL> <IfDefine !NOSSL> <IfModule mod_ssl.c> #Listen 443 Listen 10.50.40.258:443 <------Line 25 looks okay to me Listen 10.50.40.252:443 Listen 10.50.40.254:443 </IfModule> </IfDefine> </IfDefine> <snip> ~~~~~~ When I remove or comment out line 25, apache starts. Any ideas what is going wrong? I have two ssl sites that work fine on the same box. Many thanks in advance. ~James -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

3 2

[opensuse] speaking of cloning....
by James Tremblay 14 Jul '07

14 Jul '07

How does on build an image for and what tools does one need to clone a master image to a lab? If the simple copying of an image leaves you with an unbootable system and even a tool like ACRONIS leaves you with tasks what then does one do? Is there a set of commands like "sysprep" for creating a master? Is there a guide? -- James Tremblay Director of Technology Newmarket School District Newmarket,NH http://en.opensuse.org/Education "let's make a difference" -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

10 21

[opensuse] Dial on Demand on opensuse10.2 and sonyericson k-608i
by Patrik Hasibuan 14 Jul '07

14 Jul '07

Dear my friends... I build my SOHO facility with opensuse10.2. The internet gateway has sonyericson k-608i as its modem. I use BIND as the DNS server. And squid as the proxy server. ip-masquarading from SuSEfirewall. All of them are in the same linux-box. Everything runs properly if the internet gateway use 'manual dialup'. Everybody can use internet from their workstations. patrikh@suseonthelap:/media/puppy/root-partisi-suse/home/ilham> nslookup > server Default server: 192.168.23.200 Address: 192.168.23.200#53 > But the problem is I can not use DialonDemand. I configured the modem with YaST2 and checked the 3 option (Dial on Demand, Modify DNS when connected and Automaticall Retrieve DNS). I also checked the External Firewall Interface. I filled the DNS server number: 202.146.255.3 and 202.146.255.5: patrikh@mysuse1:~> nslookup > server Default server: 202.146.255.3 Address: 202.146.255.3#53 Default server: 202.146.255.5 Address: 202.146.255.5#53 Default server: 192.168.23.200 Address: 192.168.23.200#53 If I do DoD, the clients can not connect to the internet. Is it because of sonyericsson driver for k608i as what happened 4 years ago on Fritzcard ISDN modem version 2.0? Please tell me where is my mistake. Thank you very much in advance. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Scrollwheel kind of working
by Jan Karjalainen 14 Jul '07

14 Jul '07

My scrollwheel doesn't work properly, my xorg.conf looks like this: Section "InputDevice" Driver "mouse" Identifier "Mouse[1]" Option "Device" "/dev/input/mice" Option "Name" "ExplorerPS/2 on USB" Option "Protocol" "ExplorerPS/2" Option "Vendor" "USB-Mouse" Option "ZAxisMapping" "4 5" EndSection Clicking the wheel (mouse button 3) works, it brings up the smooth scroll function in Firefox, but scrolling the wheel only runs Firefox through the browsing history... Is there a setting I've missed? It's a Logitech G5 Laser Mouse, by the way..... /J -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] RE: [opensuse-amd64] Apache SSL not working after adding IP and p ort to listen.conf
by James D. Parra 13 Jul '07

13 Jul '07

There is no way for an IP address to be 258 you can't use anything higher than 255 and that is reserved for broadcasting. You might want to recheck your address. Each octect has a range from 0-255. Hope that is of help. SrA Dominick A. Obermeyer Okinawa, Japan ~~~ I feel so embarrassed. You're right that is the wrong address. Thank you for pointing out the obvious. I could make excuses, but what's the point. Thank you for your illuminating response. In gratitude, ~James -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] using 'Smart' to keep OpenSuSE 10.2 up-to-date
by riccardo35＠gmail.com 13 Jul '07

13 Jul '07

Hello, List - all was working smooth, but recently, using smart to upgrade kernel and kernel source, am running into this problem :- " error: file /lib/modules/2.6.18.8-0.5-default/modules.alias conflicts between attempted installs of kernel-syms-2.6.18.8-0.5 and kernel-default-2.6.18.8-0.5" ......................... - What needs to be done please? thanks Riccardo -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 2