July 2007 - openSUSE Users - openSUSE Mailing Lists

[opensuse] WMV plugin question
by James Hatridge 09 Jul '07

09 Jul '07

Hi all,, I've looked around and can't figure this out. I would like to see videos with wmv format. Where can I get the plugin for this? Thanks, JIM -- Jim Hatridge Linux User #88484 Ebay ID: WartHogBulletin ------------------------------------------------------ WartHog Bulletin Info about new German Stamps http://www.WartHogBulletin.de Many Enemies -- Much Honor! Anti-US Propaganda stamp collection http://www.manyenemies-muchhonor.info An American in Bavaria http://www.gaubodengalerie.de -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

11 17

[opensuse] Software RAID with existing drive
by Brandon Carl 08 Jul '07

08 Jul '07

Hello, I recently installed a IDE RAID card (Syba Ultra ATA IDE card SILO680) in my linux box and mirrored one of my drives (250Gb) to another 250Gb drive. When this was done, I tried to boot into openSUSE 10.2 and it kept stalling at "waiting for /dev/hda1 to appear." I then decided to just try and boot from my original hard drive, and it stalled on "opensuse hangs runaway loop modprobe binfmt-ffff." I thought that was very odd, so I took out the RAID card and tried to just boot from my one hdd, and it worked, thankfully. Now I am wondering if there is a software alternative to RAID 1 that i can use with my existing hard drive. I have about 100Gb of irreplaceable data under the "/home/spleeyah/" directory, which is on a seperate partition from the "/" directory. I would like to be able to just copy this drive over to the other one and then set it up as a RAID 1 configuration, but I cannot find any information about how to set this up using Yast or any other tools. I found this tutorial: http://www.tldp.org/HOWTO/Software-RAID-HOWTO.html but when I try to find "raidtools" in my software management, it doesn't show up. This is an internet installation with my repository set as: ftp://mirrors.kernel.org/opensuse/distribution/10.2/repo/oss/. Can anyone help me? -Brandon Carl Spleeyah(a)spleeyah.com www.spleeyah.com -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

7 17

Re: [opensuse] Software RAID with existing drive
by Brandon Carl 08 Jul '07

08 Jul '07

> On 07/09/2007 05:47 AM, Brandon Carl wrote: >> Well, I've gotten really far, I think. >> I mounted both raid partitions and copied over everything under "/" >> except for /sys, /mnt, and /proc >> >> /dev/md10 (RAID1: /dev/hdb1 & missing) will mount as / >> /dev/md11 (RAID1: /dev/hdb3 & missing) will mount as /home >> >> I have grub installed in the MBR of both drives, so I can boot from >> either. >> My menu.lst is setup as so: >> >> title Boot from Hard Drive A >> root (hd0,0) >> kernel /boot/vmlinuz root=/dev/hda1 noapic resume=/dev/hda5 >> splash=silent showopts >> initrd /boot/initrd >> >> title Boot from RAID >> root (hd1,0) >> kernel /boot/vmlinuz root=/dev/md10 noapic resume=/dev/hdb5 >> splash=silent showopts >> initrd /boot/initrd > If you raided swap, resume would be /dev/md2, or whatever you swap raid > was. Just read below, so swap, or the resume line, may be ok. Ok. >> >> That way I can boot from either the first drive, or the one-drive RAID >> on the second drive. >> >> I have run into a problem, however. When I attempt to choose "Boot >> from RAID" it gets to the boot commands, but it stalls at "Waiting for >> device /dev/md10 to appear: ................................. not >> found -- Exiting to /bin/sh". > Why is it now md10? It should be md0, md1, md2. What does > /etc/mdadm.conf show you? I changed it to md10 because somehow I accidentally deleted /dev/md0, /dev/md1, and /dev/md2, probably in an attempt to unmount them, lol. I couldn't find a way to create them again, so I just decided to use md10 and md11. I can't imagine this would affect anything, however. /etc/mdadm.conf does not exist on either drive. >> After this I reboot my computer and choose the "Boot from Hard Drive >> A" and then when I try to mount the /dev/md10 as /mnt it says: "cannot >> read superblock". I get around this by going into the Yast >> partitioner and deleting the /dev/md10 and /dev/md11 and by doing >> "mdadm -S /dev/md10;mdadm -S /dev/md11" as super user. I then do >> "mdadm -C /dev/md10 -l raid1 -n 2 /dev/hdb1 missing; mdadm -C >> /dev/md11 -l raid1 -n 2 /dev/hdb3 missing" to recreate the two raid >> partitions. After that it is back to normal. > Why md10? If it is the first md, it should be 0. See above. >> >> Here is the contents of my fstab under the /dev/md10, in case it's >> helpful: >> /dev/md10 / reiserfs >> acl,user_xattr,usrquota,grpquota 1 1 >> /dev/md11 /home reiserfs >> acl,user_xattr,usrquota,grpquota 1 2 >> /dev/hdb5 swap swap >> defaults 0 0 >> proc /proc proc >> defaults 0 0 >> proc /proc proc >> defaults 0 0 >> sysfs /sys sysfs >> noauto 0 0 >> debugfs /sys/kernel/debug debugfs >> noauto 0 0 >> usbfs /proc/bus/usb usbfs >> noauto 0 0 >> devpts /dev/pts devpts >> mode=0620,gid=5 0 0 >> /dev/fd0 /media/floppy auto >> noauto,user,sync 0 0 > Is that a typo, or are you missing a comma between reiserfs and acl? Do > you really have proc twice? You did make sure there was a /proc and > /sys folder for mounting their respective filesystems. I copied directly from the file, but there is a few spaces in between the reiserfs and the acl,user... The formatting got messed up, sorry. >> >> I have decided against mirroring the swap space, and just using both >> the /dev/hda5 and /dev/hdb5 as swap space, so it is doubled. > OK Is this a wise choice? >> >> So that is where I am stuck. I cannot figure how to get past the >> "waiting for device /dev/md10 to appear......". >> I have tried "mkinitrd" and "cd /mnt; chroot /mnt; mkinitrd" to try >> and fix it, but to no avail. >> >> Anyone have any ideas? >> Thanks for your help thus far! > Check /etc/mdadm.conf to make sure you really have such raid devices. The file does not exist. > > -- > Joe Morris > Registered Linux user 231871 running openSUSE 10.2 x86_64 > > -Brandon Carl -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

Re: [opensuse] Software RAID with existing drive
by Brandon Carl 08 Jul '07

08 Jul '07

----- Original Message ----- From: "Joe Morris (NTM)" <Joe_Morris(a)ntm.org> To: "Brandon Carl" <spleeyah(a)spleeyah.com> Sent: Saturday, July 07, 2007 9:28 PM Subject: Re: [opensuse] Software RAID with existing drive > On 07/08/2007 10:25 AM, Brandon Carl wrote: >>> I am not too familiar with the DM RAID, which I think is the fake raid >>> driver for your motherboard (or raid card IIRC from your first post). >>> Assuming that is correct, I wouldn't use it. > Just for clarity, I wouldn't use it because I am not familiar with it. >>> Software raid now uses the >>> mdadm program instead of raidtools. You could do this, which I am sure >>> would work but will take time. You will need two drives with matching >>> partition sizes for each raid 1 partition. At the point you are at, I >>> don't think it really matters. If you like the partitioning scheme you >>> have on /dev/hda, match it on /dev/hdb. each partition will need to be >>> marked as Linux Raid. Then, you could create a raid 1 for each >>> partition on /dev/hdb with mdadm with only one disk initially, then >>> format the new raid 1 partitions, then copy from /dev/hda. After >>> copying, you will need to change the partition type of each raided >>> partition on /dev/hda to Linux raid. Then use mdadm to add those >>> partition to your raid 1 partitions from /dev/hdb. This will sync each >>> one in turn. You will then need to edit /etc/fstab to correct your >>> partitions, i.e /dev/hda2 / to /dev/md0 /, etc. You should also edit >>> /boot/grub/menu.lst and correct as necessary (root=/dev/md0, etc), then >>> I would double check everything and reboot. You may or may not need to >>> reinstall Grub, though I probably would via the grub command prompt to >>> triple check it can find everything it needs BEFORE I am booting and it >>> tells me it cannot find..... I have done the above, and it will work. >>> It is a bit of work, and depending on data size will take a while. >>> ALSO, one other thing I just thought about, you would need to add raid1 >>> module to your initrd modules and run mkinitrd to create the raid >>> bootable image. Check out >>> http://lists.opensuse.org/opensuse-amd64/2006-09/msg00034.html for >>> additional info. >> Ok, I got as far as creating a raid 1 array for each partition on >> /dev/hdb. >> >> I created these: >> /dev/md0 /dev/hdb1 / >> /dev/md1 /dev/hdb3 /home >> /dev/md2 /dev/hdb5 swap >> >> Those were the three partitions on the /dev/hda, and they are the >> exact same size as the ones on /dev/hda, and even start and end at the >> same cylinders. > Great, looks good so far. >> I didn't know what to do about the extended partition on /dev/hda >> which was used for the swap space, I assume. I created the exact same >> things on /dev/hdb, including extended partition. > Personally, I try to have enough RAM and not need swap, and I do not > mirror swap partitions. I mount them as swap from fstab with the same > priority. I personally see no advantage to include a swap partition in > a raid 1, but it should work without any problem. >> >> Now, I don't know what to do. I mount the /dev/md0 as /mnt/raid0, and >> I can see all the files on it that must have been copied over when I >> tried the hardware RAID card. It is the exact same thing as my "/" >> directory. I created a new folder under "/" just to make sure, and it >> didn't show up in the /dev/md0, so that's good. > It probably could have worked with the hardware raid card if you > corrected menu.lst's root= line to point to the correct root, included > the driver in the initrd modules, reran mkinitrd, and corrected fstab. > But now, assuming it already has been formatted with the filesystem you > wanted, since it already has most of the info as hda, I would probably > rsync the differences for all but /proc and /sys appropriately. >> When I tried to mount /dev/md1 as /mnt/raid1, it gives me an error: >> "mount: Operation not supported". So I don't know what that means. > Was there a mountpoint raid1 under mnt? What I would do is mount > /dev/md0 to /mnt, and if it already is formatted and mostly populated, > mount /dev/md1 to /mnt/home. That should work. After that, you can > rsync each directory under / to /mnt. Include -H for hard links. >> Also, it won't let me mount the /dev/md2 because it says it looks like >> swap space, which it is. > Correct, you would just use swapon for the swap partition. >> >> Now, I don't know how to format the new raid 1 partitions on /dev/hdb >> so i can copy my data over. >> > It sounds like they are already formatted, so no need. Once you have > synced the contents, I would first correct menu.lst for the raid root, > and I would suggest making a alternate boot entry to boot from hdb > (check out http://www.linuxsa.org.au/mailing-list/2003-07/1270.html ). > You would need to fix your initrd modules and rerun mkinitrd so your > /dev/md0 has the correct initrd, so you probably have to do it on hda > and sync it. It would be correct to edit fstab on /mnt/etc/fstab to > make root and home their md devices (and swap too in your case). > Correct menu.lst on /mnt/boot/grub/menu.lst. After your new raid / and > /home are synced and ready, go to /mnt and chroot /mnt. That will make > you new drive root. Then enter grub and install grub to the hdb MBR. > Assuming you have made an entry in your menu.lst to boot from hdb > (hd1,0) with root=/dev/md0, you should now be able to boot into your new > raid1 system without yet destroying your old drives and data. Assuming > it all works (howbeit raid is only running on one disk for each > partition), you can change the partition type for hda's partitions to > software raid, no need to format, then add the right partition to the > right raid, i.e. mdadm /dev/md0 -a /dev/hda1. Each one added will sync > (mdadm --detail /dev/md0) After they are all synced, install grub on > hd0,0, and test out your boot from both entries (i.e boot from hda and > hdb, with a fallback in menu.lst). Assuming these all worked, you > should be running as you wanted and successfully performed a delicate > data surgery. HTH. > > -- > Joe Morris > Registered Linux user 231871 running openSUSE 10.2 x86_64 > Well, I've gotten really far, I think. I mounted both raid partitions and copied over everything under "/" except for /sys, /mnt, and /proc /dev/md10 (RAID1: /dev/hdb1 & missing) will mount as / /dev/md11 (RAID1: /dev/hdb3 & missing) will mount as /home I have grub installed in the MBR of both drives, so I can boot from either. My menu.lst is setup as so: title Boot from Hard Drive A root (hd0,0) kernel /boot/vmlinuz root=/dev/hda1 noapic resume=/dev/hda5 splash=silent showopts initrd /boot/initrd title Boot from RAID root (hd1,0) kernel /boot/vmlinuz root=/dev/md10 noapic resume=/dev/hdb5 splash=silent showopts initrd /boot/initrd That way I can boot from either the first drive, or the one-drive RAID on the second drive. I have run into a problem, however. When I attempt to choose "Boot from RAID" it gets to the boot commands, but it stalls at "Waiting for device /dev/md10 to appear: ................................. not found -- Exiting to /bin/sh". After this I reboot my computer and choose the "Boot from Hard Drive A" and then when I try to mount the /dev/md10 as /mnt it says: "cannot read superblock". I get around this by going into the Yast partitioner and deleting the /dev/md10 and /dev/md11 and by doing "mdadm -S /dev/md10;mdadm -S /dev/md11" as super user. I then do "mdadm -C /dev/md10 -l raid1 -n 2 /dev/hdb1 missing; mdadm -C /dev/md11 -l raid1 -n 2 /dev/hdb3 missing" to recreate the two raid partitions. After that it is back to normal. Here is the contents of my fstab under the /dev/md10, in case it's helpful: /dev/md10 / reiserfs acl,user_xattr,usrquota,grpquota 1 1 /dev/md11 /home reiserfs acl,user_xattr,usrquota,grpquota 1 2 /dev/hdb5 swap swap defaults 0 0 proc /proc proc defaults 0 0 proc /proc proc defaults 0 0 sysfs /sys sysfs noauto 0 0 debugfs /sys/kernel/debug debugfs noauto 0 0 usbfs /proc/bus/usb usbfs noauto 0 0 devpts /dev/pts devpts mode=0620,gid=5 0 0 /dev/fd0 /media/floppy auto noauto,user,sync 0 0 I have decided against mirroring the swap space, and just using both the /dev/hda5 and /dev/hdb5 as swap space, so it is doubled. So that is where I am stuck. I cannot figure how to get past the "waiting for device /dev/md10 to appear......". I have tried "mkinitrd" and "cd /mnt; chroot /mnt; mkinitrd" to try and fix it, but to no avail. Anyone have any ideas? Thanks for your help thus far! -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] Lost ability to open message links. ???
by Jack Schneider 08 Jul '07

08 Jul '07

Hi, folks. For some strange reason I no longer can open links in Thunderbird messages or the Thunderbird startup screen. Can someone give me directions to fix this problem? The system is, from about pages : SuSE 10.2 kernel 2.6.18.8-0.3-default Thunderbird version 2.0.0.4 (20070604) Firefox Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.8.1.4) Gecko/20070529 SUSE/2.0.0.4-8.3 Firefox/2.0.0.4 Thanks in advance... Jack -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0

[opensuse] rpm error
by Susemail 08 Jul '07

08 Jul '07

Hello, When I reference the rpm database I get an error message saying that another process is using the database and that the package management cannot be used now. How can I get the PID of this mystery process so I can kill it? Now I have to reboot to kill the prcess RPM version 4.4.2 Thanks, Jerome -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

4 4

[opensuse] GRUB Hard Disk Error
by Hugo Garcia 08 Jul '07

08 Jul '07

Hi Working on a Toshiba Qosmio g10. The machine is a dual boot system. It used to have Mandriva 2005 on it. We decided to install SuSE 10.2 on it. We wiped out the old partition and reformatted it, installed SuSE and when we reboot then we get the 'GRUB Hard Disk Error". If we boot off the SuSE DVD then we get the correct menu for selecting SuSE or Windows and both OS with boot properly. We rummaged through the opensuse.org site and kind of figured out that we might need to reinstall the stage 1 Grub component. We have fiddled around with the options with no progess. Any help will be appreciated. thanks -H -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 1

[opensuse] Problems with Printers and SuSe 10.2
by Robert Smits 08 Jul '07

08 Jul '07

I've just spent three very unproductive hours wrestling with a couple of printers on my SuSe 10.2 desktop. (I've had both printers - a Brother HL-5140 and an HP-1220c connected via USB cables for a without any problem. Both printers print fine to Windows, and the Brother works fine for Linux. The HP-1220c prints a line or two of garbage and spits out the page, repeating on subsequent pages). In 10.1 I did find it easier to configure my printers through CUPS than through YAST, but in 10.2 I can't get CUPS to enter a password at all. I did manage to get the following dialog when I tried to enter a password: BobsDesktop:~ # lppasswd -a rsmits greetings4950 Usage: lppasswd [-g groupname] [username] lppasswd [-g groupname] -a [username] lppasswd [-g groupname] -x [username] BobsDesktop:~ # lppasswd -g sys -a rsmits Enter password: Enter password again: BobsDesktop:~ # BobsDesktop:~ # As root I can access cupsd.conf and edit it, but don't know what to change and the password.md5 file is empty. I've tried everything I can think of to get CUPS to behave with no avail, and that includes switching from USB to Parallel ports, on both printers (one at a time) - it just will not let me add a password - even one for root. YAST isn't any better. I can get the Brother Printer going but it's only mono, and I need my 1220C for large colour pictures. It worked just fine in 10.1. In Yast, I've checked and they're both using different USB ports - and right now I even have the 1220C connected to a parallel port. I haven't got enough hair left to tear any out, but I feel like it. As far as I can tell 10.2 just won't let me print to my 1220C. Suggestions anyone? -- Bob Smits Ph 250-245-2553 Fax 250-245-5531 E-mail bob(a)rsmits.ca -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 4

[opensuse] 32 bit sigc++2 for 10.1 64bit?
by Michael Fischer 08 Jul '07

08 Jul '07

Yes, its a skype problem. Of course, it fires up just fine on my 32 bit machine at work, but I have a new 64bit machine at home, and despite installing all the 64 bit libraries, skype isn't happy about that library. Google searching seems to indicate that getting the 32bit version of the lib will fix matters up, but I can't seem to persuade YAST to install the 32bit versions. Can't seem to figure out (feels dumb) where to find a 10.1 rpm of the libs online either. Suggestions? Michael -- Michael Fischer Happiness is a config option. michael(a)visv.net Recompile and be happy. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

2 2

Fw: [opensuse] Software RAID with existing drive
by Brandon Carl 07 Jul '07

07 Jul '07

----- Original Message ----- From: "Brandon Carl" <spleeyah(a)spleeyah.com> To: "James Tremblay" <jamesat(a)comcast.net> Sent: Saturday, July 07, 2007 4:08 PM Subject: Re: [opensuse] Software RAID with existing drive > James, > > Do I really need to RAID the swap, isn't it just temporary storage? > And, I have about 5 samba shares for my network in the /home folder, would > I have to edit those if I move them into /srv? > I'll try this approach, and hopefully it will work. > > Thanks for the fast reply. > > -Brandon Carl > Spleeyah(a)spleeyah.com > www.spleeyah.com > > ----- Original Message ----- > From: "James Tremblay" <jamesat(a)comcast.net> > To: "Brandon Carl" <spleeyah(a)spleeyah.com> > Cc: <opensuse(a)opensuse.org> > Sent: Saturday, July 07, 2007 3:54 PM > Subject: Re: [opensuse] Software RAID with existing drive > > >> Brandon, >> I have played with software raid several times. >> 1) If you are looking for your whole system in a mirrored state, it's >> tricky but possible. >> 2) if you want to build a new mirrored /home that is easier. >> >> 1- you can do a reinstall and manually do the partitioning in yast. >> you will need two equal partitions for /boot but not as mirrors the >> second is a place holder for rescue and recovery, and two set up as a >> "linux raid" for each of the sections you want mirrored, i.e, two for >> swap, two for /, while remembering not to touch your current /home but >> creating an equal partition for it to raid to later. I would recommend >> creating a mirrored /srv partition with as much space as you have >> in /home now when the system is running you can copy your /home into the >> new /srv in a folder like /srv/storage and then delete and recreate a >> new linux raid partition for /home. >> 2- create a software raid using the free space on your current disk and >> the new disk and mount it as /storage or /vol1 or .... >> >> James Tremblay >> Director of Technology >> Newmarket School District >> Newmarket,NH >> http://en.opensuse.org/Education >> "let's make a difference" >> >> >> > -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

1 0