July 2006 - openSUSE Users - openSUSE Mailing Lists

[SLE] Missing PPP Dialer in Suse 10.1
by jejones＠netscape.com 06 Aug '06

06 Aug '06

I have used Suse Linux since version 9.0 and I recently upgraded to version 10.1. The installation went without a hitch. The modem was tested during installation and worked. I configured the modem and my e-mail account. However, now I can not locate any means to access the dialer. Previous versions of Suse had an icon in the taskbar that looked a bit like an electrical plug. Clicking on this brought up the dialer and connected me to the internet. I can't find anything that looks like that or any other means of access. If anyone can help me locate or set up the dialer it would be greatly appreciated. Thanks! _____________________________________________________________ Netscape. Just the Net You Need. -- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq(a)suse.com

6 8

[SLE] how to run aptate
by Joe Zien 05 Aug '06

05 Aug '06

I am using suse 10.0 and installed apt4rpm using suse 10 dvd that was the cover disk in issue 55 of linuuser & developer magazine. aptate is installed and am having problems running it. aptate should produce a sources.list for suse 10. Any help in getting apt4rpm working in suse 10 would be appreciated. Below are some sites I used to try to get apt4rpm working, but no help on running aptate: http://ftp.gwdg.de/pub/linux/suse/apt/suse10-i386/RPMS.suser-rbos http://ftp.gwdg.de/pub/linux/suse/apt/suse10-i386/examples http://linux01.gwdg.de/apt4rpm/apt4suse.html http://apt4rpm.sourceforge.net TIA Joe Zien -- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq(a)suse.com

3 6

[SLE] hotswap sata disks
by Roger Oberholtzer 04 Aug '06

04 Aug '06

Of course hot swapping SATA disks is not currently supported in Linux. As such, udevmonitor reports nothing when the disks are inserted or removed on a system that does support this at the hardware level. There is work in libata, but nothing functioning for use in a production system. So, what would be the next best thing? I assume I would need to do a script that handles un-mounting the disks, and then a rescan of the devices. And then a re-mount.. I remember doing this way back with SCSI devices. But perhaps there is a best way to scan for SATA devices? The tricky bit is that I have 4 SATA disks that will sort of work in sets. And the user will probably want to pop in one in the set when looking for something. I do seem to be rambling a bit, but it is because I can't decide the best approach. -- Roger Oberholtzer OPQ Systems AB Ramböll Sverige AB Kapellgränd 7 P.O. Box 4205 SE-102 65 Stockholm, Sweden Tel: Int +46 8-615 60 20 Fax: Int +46 8-31 42 23 -- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq(a)suse.com

6 14

[SLE] tightvnc and suse
by Richard Bown 04 Aug '06

04 Aug '06

Hi I've been using tightvnc on Mandrake for a long time, its very easy to use on that distro, click on the icon from the apps menus and enter the remote address and display number, then off it goes. Seems to be a little different on suse,I've tried vncconnect -display address port but I get richard-g8jvm@g8jvm:~> vncconnect -display 1 192.168.90.1:5901 vncconnect: unable to open display "1" Have I got to start another app at my end before it will connnect ? .TIA Richard -- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq(a)suse.com

6 7

[SLE] HDD Upgrade
by Brian Blater (BBList) 03 Aug '06

03 Aug '06

I have SUSE 10.1 installed on a machine here with a 40G HDD. I have just received a new 80GB drive. I want to replace the 40G that is partition as follows: Dell partition, /boot partition, swap partition and / (root). I have imaged the machine (used systemrescuecd) and copied everything to the new HDD and resizing the / partition using qtparted to include the free space. I disconnected the old HDD and booted with the new drive and the system is up and running. However, when I do a df -h it still shows the / partition at about 36G. Filesystem Size Used Avail Use% Mounted on /dev/hda4 36G 5.2G 31G 15% / udev 506M 184K 506M 1% /dev /dev/hda3 502M 40M 463M 8% /boot I've never done this before, so am I missing a step here? What do I need to do to get the / partition to recognize it is now larger? Thanks, Brian -- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq(a)suse.com

9 14

[SLE] SuSE 10.0 client for DynDNS???
by George Stoianov 02 Aug '06

02 Aug '06

Hi, I am owndering if there is a client for DynDNS for SuSE 10.0 DynDNS lists these http://www.dyndns.com/support/clients/unix.html but I cannot find any packages for them. Thanks in advance, George -- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq(a)suse.com

7 14

[SLE] Upgrade to Thunderbird 1.5 ???
by ken 01 Aug '06

01 Aug '06

Is there a Suse upgrade to Thunderbird 1.5 for v.9.3 or are we supposed to grab a tarball? Or upgrade to Suse 10.x??? tnx. -- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq(a)suse.com

3 3

[opensuse] RepoKommander for SUSE Linux
by Martin Schlander 01 Aug '06

01 Aug '06

Hi I've made a Kommander script for adding repositories to SL 10.1. Versions are available for both rug/YaST and Smart. Check it out at: http://kde-apps.org/content/show.php?content=43378 It should work nicely but it needs polish. I decided to release early - time will tell if I'll release often, too ;) This is only sort of a proof of concept. It would be better if a real developer could make something better. But I actually think it's pretty useful. I'm considering adding functionality like installing multimedia-packages and the like. Thanks to Benjamin, aka. benJIman for some pointers. Martin --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-help(a)opensuse.org

5 13

[opensuse] async I/O on SuSE 9.3 (aio)
by Yu Safin 01 Aug '06

01 Aug '06

does anybody have any experience running aio on SuSE? how do I make it happen? this is to connect it to Oracle 10G (10.2). A-sync I/o's is default for Oracle. is it stable? do I need to patch the kernel? --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-help(a)opensuse.org

2 4

[opensuse] XFCE4
by Chuck Payne 01 Aug '06

01 Aug '06

Question, When will XFCE be a part of base install of OpenSUSE? Also, there use to be a pay disc for software that didn't fall under GPL. What is that disc now? Is that the Add On Disc? -- Command, n.: Statement presented by a human and accepted by a computer in such a manner as to make the human feel as if he is in control. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-help(a)opensuse.org

8 13