On Tuesday 28 May 2002 01:36, John Lamb wrote:
- The key is shown on my keyboard as two horizontal hyphens too. I've just
- been using it for so long (it's used in C++ for "or"), I'd forgotten
- that it's different from the key with the bar on it (which never works
- anyway). Probably something historical here. ;-)
Hi again John,
Well, now that I have all of the packages installed, I did a ./configure (no
errors) a make (no errors as far as I can see), but then make install screws
up.? Any ideas?
thor:/home/brian/Downloads/Printer/gimp-print-4.3.0 # make install
Making install in include
make[1]: Entering directory
`/home/brian/Downloads/Printer/gimp-print-4.3.0/include'
Making install in gimp-print
make[2]: Entering directory
`/home/brian/Downloads/Printer/gimp-print-4.3.0/include/gimp-print'
make[3]: Entering directory
`/home/brian/Downloads/Printer/gimp-print-4.3.0/include/gimp-print'
make[3]: Nothing to be done for `install-exec-am'.
/bin/sh ../../scripts/mkinstalldirs /usr/include/gimp-print
mkdir -p -- /usr/include/gimp-print
/usr/bin/install -c -m 644 gimp-print.h /usr/include/gimp-print/gimp-print.h
make[3]: Leaving directory
`/home/brian/Downloads/Printer/gimp-print-4.3.0/include/gimp-print'
make[2]: Leaving directory
`/home/brian/Downloads/Printer/gimp-print-4.3.0/include/gimp-print'
make[2]: Entering directory
`/home/brian/Downloads/Printer/gimp-print-4.3.0/include'
make[3]: Entering directory
`/home/brian/Downloads/Printer/gimp-print-4.3.0/include'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory
`/home/brian/Downloads/Printer/gimp-print-4.3.0/include'
make[2]: Leaving directory
`/home/brian/Downloads/Printer/gimp-print-4.3.0/include'
make[1]: Leaving directory
`/home/brian/Downloads/Printer/gimp-print-4.3.0/include'
Making install in intl
make[1]: Entering directory
`/home/brian/Downloads/Printer/gimp-print-4.3.0/intl'
if test "gimp-print" = "gettext" \
&& test '' = 'intl-compat.o'; then \
/bin/sh `case "scripts/mkinstalldirs" in /*) echo "scripts/mkinstalldirs"
;; *) echo "../scripts/mkinstalldirs" ;; esac` /usr/lib /usr/include; \
/usr/bin/install -c -m 644 libintl.h /usr/include/libintl.h; \
/bin/sh ../libtool --mode=install \
/usr/bin/install -c -m 644 libintl.a /usr/lib/libintl.a; \
else \
: ; \
fi
if test 'no' = yes; then \
/bin/sh `case "scripts/mkinstalldirs" in /*) echo "scripts/mkinstalldirs"
;; *) echo "../scripts/mkinstalldirs" ;; esac` /usr/lib; \
temp=/usr/lib/t-charset.alias; \
dest=/usr/lib/charset.alias; \
if test -f /usr/lib/charset.alias; then \
orig=/usr/lib/charset.alias; \
sed -f ref-add.sed $orig > $temp; \
/usr/bin/install -c -m 644 $temp $dest; \
rm -f $temp; \
else \
if test yes = no; then \
orig=charset.alias; \
sed -f ref-add.sed $orig > $temp; \
/usr/bin/install -c -m 644 $temp $dest; \
rm -f $temp; \
fi; \
fi; \
/bin/sh `case "scripts/mkinstalldirs" in /*) echo "scripts/mkinstalldirs"
;; *) echo "../scripts/mkinstalldirs" ;; esac` /usr/share/locale; \
test -f /usr/share/locale/locale.alias \
&& orig=/usr/share/locale/locale.alias \
|| orig=./locale.alias; \
temp=/usr/share/locale/t-locale.alias; \
dest=/usr/share/locale/locale.alias; \
sed -f ref-add.sed $orig > $temp; \
/usr/bin/install -c -m 644 $temp $dest; \
rm -f $temp; \
else \
: ; \
fi
if test "gimp-print" = "gettext"; then \
/bin/sh `case "scripts/mkinstalldirs" in /*) echo "scripts/mkinstalldirs"
;; *) echo "../scripts/mkinstalldirs" ;; esac` /usr/share/gettext/intl; \
/usr/bin/install -c -m 644 VERSION /usr/share/gettext/intl/VERSION; \
/usr/bin/install -c -m 644 ChangeLog.inst
/usr/share/gettext/intl/ChangeLog; \ dists="COPYING.LIB-2 COPYING.LIB-2.1
Makefile.in config.charset locale.alias ref-add.sin ref-del.sin gettext.h
gettextP.h hash-string.h libgnuintl.h libgettext.h loadinfo.h bindtextdom.c
dcgettext.c dgettext.c gettext.c finddomain.c loadmsgcat.c localealias.c
textdomain.c l10nflist.c explodename.c dcigettext.c dcngettext.c dngettext.c
ngettext.c plural.y localcharset.c intl-compat.c"; \
for file in $dists; do \
/usr/bin/install -c -m 644 ./$file \
/usr/share/gettext/intl/$file; \
done; \
chmod a+x /usr/share/gettext/intl/config.charset; \
dists="plural.c"; \
for file in $dists; do \
if test -f $file; then dir=.; else dir=.; fi; \
/usr/bin/install -c -m 644 $dir/$file \
/usr/share/gettext/intl/$file; \
done; \
dists="xopen-msg.sed linux-msg.sed po2tbl.sed.in cat-compat.c"; \
for file in $dists; do \
rm -f /usr/share/gettext/intl/$file; \
done; \
else \
: ; \
fi
make[1]: Leaving directory
`/home/brian/Downloads/Printer/gimp-print-4.3.0/intl'Making install in lib
make[1]: Entering directory
`/home/brian/Downloads/Printer/gimp-print-4.3.0/lib'make[2]: Entering
directory `/home/brian/Downloads/Printer/gimp-print-4.3.0/lib'make[2]:
Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory
`/home/brian/Downloads/Printer/gimp-print-4.3.0/lib' make[1]: Leaving
directory `/home/brian/Downloads/Printer/gimp-print-4.3.0/lib' Making install
in man
make[1]: Entering directory
`/home/brian/Downloads/Printer/gimp-print-4.3.0/man'make[2]: Entering
directory `/home/brian/Downloads/Printer/gimp-print-4.3.0/man'make[2]:
Nothing to be done for `install-exec-am'.
/bin/sh ../scripts/mkinstalldirs /usr/man/man1
/usr/bin/install -c -m 644 ./escputil.1 /usr/man/man1/escputil.1
/usr/bin/install -c -m 644 ./gimpprint-config.1
/usr/man/man1/gimpprint-config.1
/bin/sh ../scripts/mkinstalldirs /usr/man/man3
/usr/bin/install -c -m 644 ./gimpprint.3 /usr/man/man3/gimpprint.3
/bin/sh ../scripts/mkinstalldirs /usr/man/man8
/usr/bin/install -c -m 644 ./cups-calibrate.8 /usr/man/man8/cups-calibrate.8
make[2]: Leaving directory
`/home/brian/Downloads/Printer/gimp-print-4.3.0/man' make[1]: Leaving
directory `/home/brian/Downloads/Printer/gimp-print-4.3.0/man' Making install
in src
make[1]: Entering directory
`/home/brian/Downloads/Printer/gimp-print-4.3.0/src'Making install in printdef
make[2]: Entering directory
`/home/brian/Downloads/Printer/gimp-print-4.3.0/src/printdef'
make[3]: Entering directory
`/home/brian/Downloads/Printer/gimp-print-4.3.0/src/printdef'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory
`/home/brian/Downloads/Printer/gimp-print-4.3.0/src/printdef'
make[2]: Leaving directory
`/home/brian/Downloads/Printer/gimp-print-4.3.0/src/printdef'
Making install in main
make[2]: Entering directory
`/home/brian/Downloads/Printer/gimp-print-4.3.0/src/main'
make[3]: Entering directory
`/home/brian/Downloads/Printer/gimp-print-4.3.0/src/main'
/bin/sh ../../scripts/mkinstalldirs /usr/bin
/usr/bin/install -c gimpprint-config /usr/bin/gimpprint-config
/bin/sh ../../scripts/mkinstalldirs /usr/lib
/bin/sh ../../libtool --mode=install /usr/bin/install -c libgimpprint.la
/usr/lib/libgimpprint.la
/usr/bin/install -c .libs/libgimpprint-4.3.0.so /usr/lib/libgimpprint-4.3.0.so
(cd /usr/lib && rm -f libgimpprint.so && ln -s libgimpprint-4.3.0.so
libgimpprint.so)
/usr/bin/install -c .libs/libgimpprint.lai /usr/lib/libgimpprint.la
PATH="$PATH:/sbin" ldconfig -n /usr/lib
----------------------------------------------------------------------
Libraries have been installed in:
/usr/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the `LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the `LD_RUN_PATH' environment variable
during linking
- use the `-Wl,--rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to `/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
/bin/sh ../../scripts/mkinstalldirs /usr/share/aclocal
/usr/bin/install -c -m 644 gimpprint.m4 /usr/share/aclocal/gimpprint.m4
/bin/sh ../../scripts/mkinstalldirs /usr/lib/pkgconfig
/usr/bin/install -c -m 644 gimpprint.pc /usr/lib/pkgconfig/gimpprint.pc
make[3]: Leaving directory
`/home/brian/Downloads/Printer/gimp-print-4.3.0/src/main'
make[2]: Leaving directory
`/home/brian/Downloads/Printer/gimp-print-4.3.0/src/main'
Making install in escputil
make[2]: Entering directory
`/home/brian/Downloads/Printer/gimp-print-4.3.0/src/escputil'
/bin/sh ../../libtool --mode=link gcc -Wall -Wcast-align -Wstrict-prototypes
-Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Wwrite-strings
-pedantic -g -O2 -O -o escputil escputil.o
gcc -Wall -Wcast-align -Wstrict-prototypes -Wmissing-prototypes
-Wmissing-declarations -Wnested-externs -Wwrite-strings -pedantic -g -O2 -O
-o escputil escputil.o
escputil.o: In function `main':
/home/brian/Downloads/Printer/gimp-print-4.3.0/src/escputil/escputil.c:351:
undefined reference to `xmalloc'
/home/brian/Downloads/Printer/gimp-print-4.3.0/src/escputil/escputil.c:360:
undefined reference to `xmalloc'
/home/brian/Downloads/Printer/gimp-print-4.3.0/src/escputil/escputil.c:369:
undefined reference to `xmalloc'
escputil.o: In function `do_get_input':
/home/brian/Downloads/Printer/gimp-print-4.3.0/src/escputil/escputil.c:1258:
undefined reference to `xmalloc'
collect2: ld returned 1 exit status
make[2]: *** [escputil] Error 1
make[2]: Leaving directory
`/home/brian/Downloads/Printer/gimp-print-4.3.0/src/escputil'
make[1]: *** [install-recursive] Error 1
make[1]: Leaving directory
`/home/brian/Downloads/Printer/gimp-print-4.3.0/src'
make: *** [install-recursive] Error 1
Cheers,
Brian
