- openSUSE Users

[S.u.S.E. Linux] IRC programs
by jboonen＠worldonline.nl 15 Mar '98

15 Mar '98

Hi people, Does someone know a good X windows IRC program with tabs for the different channels and also for msg's? Thank you very much. Regards, Joop Boonen. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Partition Strategy
by deem＠wdm.com 15 Mar '98

15 Mar '98

Ron Lavoie <lavoie(a)netcom.ca> wrote: > > I have about 720 mg available for Linux over hda (a 2.1gig Seagate) and hdb > (a 1.2 gig whatever). I can allocate partition sizes pretty much as I please. > > My sense is that I should devote a 100 meg partition in hda2 to root /, > another 64 megs to a swap partition on hda, and about 560 megs on hdb to /usr. > > I have two questions: > > 1) Is this an optimal strategy? The system will be single user, and will > not be used as a server. > 2) When installing, how do I get /usr into a different partition/physical > drive? Or do I have to move the filesystem after installation? I don't > quite get the concept here. Will I have to mount hdb2 by hand every time I > boot? > > Oops, that's three #-). SuSE allows you to have mutiple options from installation. I choose the "Premium Installation, and backout any apps not desired. My present scheme is : wdm:/usr/src # df Filesystem 1024-blocks Used Available Capacity Mounted on /dev/sdb1 397500 57986 318984 15% / /dev/sdb2 1982006 779423 1100132 41% /usr /dev/sdb4 1547351 107750 1359627 7% /home db3 is my swap of course. You could have more partitions of course, but because this installation is temporary, waiting for 5.2, I used just these 3. If you don't separate /usr from /, then depending on what packages you install, /usr takes up most of the space in / when it's included. I usually have /home, /opt and /usr in different physical partitions. /opt for Netscape, Applixware, etc., that likes /opt. Others use /usr/local instead of /opt. /home separate for my personal work I like to have there. /usr separate due to the size. A clean minimal install in / should have about 200megs, a swap partition. I've found that the saying, 'Only the Experienced Walk With a Limp', is the path I've had to take, due to the many ways of setting up a Linux box. The best advice I give, is get a big HD, lots of RAM and a first rate video card & monitor, and you'll have fun. Best Regards, WDM W.D.McKinney (Dee) -=- deem(a)wdm.com No claim to fame, just saved by Grace. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] Network printing (samba SuSE -> Win95 : HP LaserJet 6L)
by martin_moeller＠ibm.net 15 Mar '98

15 Mar '98

Hi there, guys (M/F) I have set up pretty much everything satisfactory now. SuSE is great all in all, but I have this one problem: I want a full-fledged printout on my fathers printer (running Windows 95) from SuSE and 'smbprint' doesn't do that by itself. As far as I can tell, the very nice printing utility that SuSE comes with knows nothing about SMB/Samba printers, and even the remote printer option it has have no filters to choose (I guess in that case they are run at the other end?!?). Anyone have any ideas? I have generated the filters that would be necessary if the printer were local. Can I utilize them somehow??? If it helps set the scene, I have to print to 'PETERPC\HP6L' and have in /etc/printcap a 'hp6l' entry... -- --- e-mail: martin_moeller(a)technologist.com - an iName service for life(?) Martin Moeller, Denmark - Signing off. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] Partition Strategy
by lavoie＠netcom.ca 15 Mar '98

15 Mar '98

I have about 720 mg available for Linux over hda (a 2.1gig Seagate) and hdb (a 1.2 gig whatever). I can allocate partition sizes pretty much as I please. My sense is that I should devote a 100 meg partition in hda2 to root /, another 64 megs to a swap partition on hda, and about 560 megs on hdb to /usr. I have two questions: 1) Is this an optimal strategy? The system will be single user, and will not be used as a server. 2) When installing, how do I get /usr into a different partition/physical drive? Or do I have to move the filesystem after installation? I don't quite get the concept here. Will I have to mount hdb2 by hand every time I boot? Oops, that's three #-). -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] YaST, kerneld, PS/2 mouse
by unknown＠example.com 15 Mar '98

15 Mar '98

froZen wrote: > > Thanks, you were right about YaST, but my mouse still doesn't work. For > some strange reason when LILO boots the kernel, 2.0.30 runs and no > kerneld or mouse support. But if I boot off of the bootdisk I made > during the install, then 2.0.33 runs and I have no problems. Does > anyone have any ideas on how I can fix this? Thanks in advance. > Kevin. Sounds like the default kernel you installed does not have ps2 mouse or kerneld suppot rolled in as a default. Try rolling your own kernel with support rolled in. You might run this one by Bodo at SuSe. This may be a flaw in the paticular kernel you chose. I have never experienced this with a SuSE kernel, so I don't believe it to be the correct behavior. > > >The fact that YaST keeps comeing up would indicate you didn't let YaST >finish it > >'s work. there's a point there where it runs a bunch of setup scripts >(you can > >see the output on... tty9, I think). Many first time SuSErs like to >reboot here > >. I know I did. > Yup.. if you reboot before the scripts finish you'll mess up the install so that it will start Yast each time. I've mentioned this to the powers that be (Bodo are you listening) and what I found was that even after rebooting three or four times and letting the scripts complete, Yast would still restart. The cure is as folows.. cd /usr/lib/YaST lls -la | more and you should fine a file called .configured2 If you have COMPLETELY INSTALLED and booted into YaST at least THREE times, you can correct the boot behavior of SuSE by deleting the file .configured2 > >On 14-Mar-98 froZen wrote: > >> > >>I've just installed suse 5.1 and I have three problems that may be > >>related to each other. One is that every time I reboot, YaST comes up. > >>Once it sees that there is nothing to do it closes. The next thing I > >>noticed is that kerneld is not started. Then I get the message from gpm > >>that my ps2 mouse is not found. I do have alias char-major-10 psaux in > >>my /etc/conf.modules and /dev/mouse linked to /dev/psaux. My mouse did > >>work when I first installed and it lets you test gpm. It also worked > >>when after installing everything YaST closes and brings you to the > >>command line for the first time. But after I rebooted my mouse wasn't > >>found. Any Ideas? > -- I hope this helps. On the kerneld and PS/2 mouse problem it sounds like the kernel you are running has neither kerneld or PS/2 support. Try rolling a new kernel with support for these services. Hope this helps, best, -- W.J. Sandman III Systems Programmer/WebMaster PriceWeber Marketing Communications sandman(a)aye.net -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] XFree86 3.2.2 Thanks SuSE
by hettar＠teleport.com 15 Mar '98

15 Mar '98

--------------9B932E9199485BDE17C75B30 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Paul groves wrote: > On Sun, 15 Mar 1998, Steven Udell wrote: > > > I gota say XFree 3.2.2 was simple to download from ftp.suse.com > > and install with Yast. I gota say I was useing SuSE X servers before > > and Xfree86 incorperated them into 3.2.2 and they a hell of alot better. > > I just installed S.u.S.E. 5.1 yesterday, noticed XFree 3.2.2 was out, so > downloaded the rpms from the S.u.S.E. ftp server and tried to install > them... Right, I'm sure I've missed something really obvious here, but how > do you perform updates with Yast? First of all :1) Run Yast 2) pick choose/install packages 3) install packages 4) pick from directory 5) put in the directory they are (where u downloaded to) 6) put an X in the rpms you want to install and hit F10 to start it 7) your done, have a blast..... 8) oh just exit Yast by going to main menu and finish up and exit button 9) should clean up, and update you man pages and a few other things. > There seems to be no way of selecting > the directory you've downloaded updated rpms into (so Yast has no > knowledge of them...)! I tried changing "installation media" to the > download directory (in this case /root/home/tmp) but this didn't work > either. In the end I tried installing XFree 3.2.2 using rpm (with -U > option), but one of the components clashed with ps-1.12.2-5 and refused to > install... Also how do you install netscape.rpm without conflicting with > the ntscp (Netscape script) thing already installed? > Why do people need a netscape RPM?Netscape is simple enough lets say you download communicator.x86.tar.gz put that file where your want it I put it in /usr/local/netscape (thou I am not security minded) some people put it in /opt/lib or somethen.. anyways once you move it to where your gona have it type : tar -zxvf communicator.x86.tar.gz it will un-tar itself.. next Read the README then do a './ns-install' (everything in the quotes) so what I am saying for DOS heads to execute a file you use a period and a slash before the name of the file. ./name-of-file <--like that ok now its done.... now to run it, you gota be in X open a term and change directorys to where you did install it and type /netscape There that should of started it ...have a blast > Cheers > > Paul -- Steven Udell Wayfarers hettar(a)teleport.com for truth love sudell(a)teleport.com and courage <A HREF="http://www.teleport.com/~hettar"><A HREF="http://www.teleport.com/~hettar</A">http://www.teleport.com/~hettar</A</A>> --------------9B932E9199485BDE17C75B30 Content-Type: text/html; charset=us-ascii Content-Transfer-Encoding: 7bit <HTML> Paul groves wrote: <BLOCKQUOTE TYPE=CITE>On Sun, 15 Mar 1998, Steven Udell wrote: > I gota say XFree 3.2.2 was simple to download from ftp.suse.com > and install with Yast. I gota say I was useing SuSE X servers before > and Xfree86 incorperated them into 3.2.2 and they a hell of alot better. I just installed S.u.S.E. 5.1 yesterday, noticed XFree 3.2.2 was out, so downloaded the rpms from the S.u.S.E. ftp server and tried to install them... Right, I'm sure I've missed something really obvious here, but how do you perform updates with Yast?</BLOCKQUOTE> First of all :1) Run Yast 2) pick choose/install packages 3) install packages 4) pick from directory 5) put in the directory they are (where u downloaded to) 6) put an X in the rpms you want to install and hit F10 to start it 7) your done, have a blast..... 8) oh just exit Yast by going to main menu and finish up and exit button 9) should clean up, and update you man pages and a few other things. <BLOCKQUOTE TYPE=CITE>There seems to be no way of selecting the directory you've downloaded updated rpms into (so Yast has no knowledge of them...)! I tried changing "installation media" to the download directory (in this case /root/home/tmp) but this didn't work either. In the end I tried installing XFree 3.2.2 using rpm (with -U option), but one of the components clashed with ps-1.12.2-5 and refused to install... Also how do you install netscape.rpm without conflicting with the ntscp (Netscape script) thing already installed? </BLOCKQUOTE> Why do people need a netscape RPM?Netscape is simple enough lets say you download communicator.x86.tar.gz put that file where your want it I put it in /usr/local/netscape (thou I am not security minded) ome people put it in /opt/lib or somethen.. anyways once you move it to where your gona have it type : tar -zxvf communicator.x86.tar.gz it will un-tar itself.. next Read the README then do a './ns-install' (everything in the quotes) o what I am saying for DOS heads to execute a file you use a period and a slash before the name of the file. ./name-of-file <--like that ok now its done.... now to run it, you gota be in X open a term and change directorys to where you did install it and type /netscape There that should of started it ...have a blast <BLOCKQUOTE TYPE=CITE> Cheers Paul</BLOCKQUOTE> -- Steven Udell Wayfarers hettar(a)teleport.com for truth love sudell(a)teleport.com and courage http://www.teleport.com/~hettar">http://www.teleport.com/~hettar</A> </HTML> --------------9B932E9199485BDE17C75B30-- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] remote X
by sandman＠aye.net 15 Mar '98

15 Mar '98

I assume you are telneting toe the pentium machine and executintng the startx command? eh? if so you need to export your display FIRST under bash type: export $DISPLAY=192.168.1.2:0.0 under csh $DISPLAY=192.168.1.2:0.0 export DISPLAY (this MUST be on two lines) then execute the startx command on the pentium mclark(a)datsrvr.datsit.com wrote: > > How do I start X from another machine on my network?? > > Machine 1 > Pentium 166/48 Mb RAM/192.168.1.1 > > Machine 2 > 486SX33/8 Mb RAM/192.168.1.2 > > I would like to start and run X from the pentium and display X on the > 486. I have tried using startx and it always starts from the 486. If > I use X :192.168.1.1:0, I can start X, but have no display manager. > > I'm kind of lost!!! > > Thanks > > mc > > -- > To get out of this list, please send email to majordomo(a)suse.com with > this text in its body: unsubscribe suse-linux-e -- William J. Sandman III Need Windows95 or better? sandman(a)aye.net Linux... It's not just for wsandman(a)acm.org breakfast anymore. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Need help with LILO
by sandman＠aye.net 15 Mar '98

15 Mar '98

Running Win95? WHY? Oh well... no holy wars from me. Install the rescue/safety disk you made when you installed. Didn't make one?? SHAME... Get someone else to make you a rescue disk under win95. Boot from that disk and enter the command prompt. execute the commabd: fdisk /mbr This will rewrite the master boot record to win95 ONLY... Reboot you should be good to go. philsf(a)altavista.net wrote: > > Hello ALL, > > I'm not quite sure if this is the right place to post this question, but I > really don't know any other option, in this particular case. > > I installed LILO in the MBR of the HD which hosts my linux partition and my > win95 ones. The problem is, when I deleted my linux partition to re-install > i later, I lost the ability to boot Win95, because LILO could not find the > Linux Native partition. My question is: HOW can I remove LILO from the MBR, > without repartitioning the whole HD? And, can I use LILO from anywhere but > the MBR and the floppy (I saw another option in the Slackware install, I > think it had something to do with the root parition of linux, but dunno for > sure...) > > In advance, I thank you all > > -- > Felipe Figueiredo > Felipe Figueiredo > > -- > To get out of this list, please send email to majordomo(a)suse.com with > this text in its body: unsubscribe suse-linux-e -- William J. Sandman III Need Windows95 or better? sandman(a)aye.net Linux... It's not just for wsandman(a)acm.org breakfast anymore. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Need help with LILO
by sandman＠aye.net 15 Mar '98

15 Mar '98

Running Win95? WHY? Oh well... no holy wars from me. Install the rescue/safety disk you made when you installed. Didn't make one?? SHAME... Get someone else to make you a rescue disk under win95. Boot from that disk and enter the command prompt. execute the commabd: fdisk /mbr This will rewrite the master boot record to win95 ONLY... Reboot you should be good to go. philsf(a)altavista.net wrote: > > Hello ALL, > > I'm not quite sure if this is the right place to post this question, but I > really don't know any other option, in this particular case. > > I installed LILO in the MBR of the HD which hosts my linux partition and my > win95 ones. The problem is, when I deleted my linux partition to re-install > i later, I lost the ability to boot Win95, because LILO could not find the > Linux Native partition. My question is: HOW can I remove LILO from the MBR, > without repartitioning the whole HD? And, can I use LILO from anywhere but > the MBR and the floppy (I saw another option in the Slackware install, I > think it had something to do with the root parition of linux, but dunno for > sure...) > > In advance, I thank you all > > -- > Felipe Figueiredo > Felipe Figueiredo > > -- > To get out of this list, please send email to majordomo(a)suse.com with > this text in its body: unsubscribe suse-linux-e -- William J. Sandman III Need Windows95 or better? sandman(a)aye.net Linux... It's not just for wsandman(a)acm.org breakfast anymore. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] kenel directory
by sandman＠no-spam.aye.net.suse.de 15 Mar '98

15 Mar '98

Ron Lavoie wrote: > > The installation guide for SuSE 5.1 says that the config files are in > /usr/src/linux. The closest thing I have is /usr/src/linux-2.0.32 >Why don't I have a directory here simply called /linux? Can this be causing > problems when I'm compiling. > There SHOULD be a soft link (see man ln )from /usr/src/linux to usr/src/linux-what_ever_your _version_is ie. linux -> /usr/src/linux-2.0.32 Sounds like you install didn't quite complete that for you. You have two options... 1) just go to usr/src/llinux-2.0.32 and work there... but you MAY have problems, so... 2) got to /usr/src and execute the following: ln -s /usr/src/linux-2.0.32 linux This will soft link linux to the existing source directory... > I'm getting an error message something like, "nothing to act upon" or > "target...stopping." Sorry, I forgot to write it down. make dep & make > clean are ok, but I can't seem to make zImage. <snip> -- William J. Sandman III Need Windows95 or better? sandman(a)aye.net Linux... It's not just for wsandman(a)acm.org breakfast anymore. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Very new...
by sandman＠no-spam.aye.net.suse.de 15 Mar '98

15 Mar '98

gecko(a)freecar.com wrote: > > On 13-Mar-98 Paul groves wrote: > >around with RedHat), does the following sound like a sensible partition > >set-up (for a single user dialup\graphics workstaion)*?: > > > > (snip) > >/ 100Mb Nope... > >/home 100Mb possibly... see below. > > I find I run out of space in my home directory a lot either /root or /home > which ever. Even though I'm single user, I still store most of my stuff in > /home/gecko.. the stuff I"m working with playing with... > <snip> Unless your installing SuSE in an extremely stripped down moed, I've found that / needs to be around 450MB at least for all the goodies you will invariably want to install. You COULD get it installed with a default kernel in 100MB but you would have few applications, little documentation and probably not be able to get the source code installed with gcc to roll a new kernel. My advice... Up the hard drive to AT LEAST 450MB for / best, -- William J. Sandman III Need Windows95 or better? sandman(a)aye.net Linux... It's not just for wsandman(a)acm.org breakfast anymore. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] RPM on Suse
by mperry＠basin.com 15 Mar '98

15 Mar '98

On 15 Mar, Mickael Remond wrote: > > Hi, > > Could you tell me if the RPM found on the RedHat ftp site works well with > Suse ? > > What kind of RPM should I choose (Source or binaries for 4.2 or 5.0) ? > > Thanks in advance for your help. > > > /---Mickael-------------/ > / mikl(a)club-internet.fr / > / UIN : 2265396 / > /-----------------------/ > -- > To get out of this list, please send email to majordomo(a)suse.com with > this text in its body: unsubscribe suse-linux-e I have used the rpm packages in redhat's contrib/i386 directory without any problems. For instance, last nite I installed via rpm tkrat and tkgoodtstuff. Both are working quite well. I hav enot tried the binaries for rh 5.0 specifically since I have had quite good luck with the ones in the contrib/i386 directory including netscape. -- --Michael Perry-- mperry(a)basin.com -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Install Linux 5.1 S.u.S.E and W95/WNT4.
by luis＠lac.resonet.com 15 Mar '98

15 Mar '98

On Sat, 14 Mar 1998, Fjoe wrote: > I have installed in my computer WINDOWS95, WINDOWSNT 4.0 and I have tried to > install > Linux 5.1 S.u.S.E. > Before I had RedHat 5.0 and it activated it with the BOOT MANAGER of > PARTITION MAGIC. > When I am finishing installing Linux 5.1 S.u.S.E and I configure LILO I tell > him that it starts up from first sector of my root partition. > When intent to start up from BOOT MANAGER tells me that the partition (/ - > /dev/sda3) is not formated. > I already say that with REDHAT LINUX 5.0 works me perfectly. I don't know for sure what the problem is, but I am using a similar setup , IBM boot manager though which is same boot manager partition magic uses, I think. Did you create the linux partitions with the linux fdisk or with the partition magic fdisk? I think it's safer to have linux create the partitions. -- Lou A. Costabile Voice and Fax: [613] 781-7061 <A HREF="mailto:luis@lac.resonet.com">mailto:luis@lac.resonet.com</A> To get Receipt Notification include %rec% anywhere in the Subject field. -- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Nslookup... help
by luis＠lac.resonet.com 15 Mar '98

15 Mar '98

On Sat, 14 Mar 1998, Simone Castellaneta wrote: > > I would like to have "nslookup" command and you told me that it is in > package "n" -> "Bind" and it' s true but in the same package there is a > DNS server that I don' t need and I don' t want to install. Please, if > you can, mail me "nslookup" executable alone. Thanks. > I don't mind sending nslookup to you via mail but you should really try and do a selective install of it. You don't need to install everything from a package, just place an X where you want something and leave a blank where you don't. -- Lou A. Costabile Voice and Fax: [613] 781-7061 <A HREF="mailto:luis@lac.resonet.com">mailto:luis@lac.resonet.com</A> To get Receipt Notification include %rec% anywhere in the Subject field. -- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] XFree86 3.2.2 Thanks SuSE
by paul.groves＠computing-services.oxford.ac.uk 15 Mar '98

15 Mar '98

On Sun, 15 Mar 1998, Steven Udell wrote: > I gota say XFree 3.2.2 was simple to download from ftp.suse.com > and install with Yast. I gota say I was useing SuSE X servers before > and Xfree86 incorperated them into 3.2.2 and they a hell of alot better. I just installed S.u.S.E. 5.1 yesterday, noticed XFree 3.2.2 was out, so downloaded the rpms from the S.u.S.E. ftp server and tried to install them... Right, I'm sure I've missed something really obvious here, but how do you perform updates with Yast? There seems to be no way of selecting the directory you've downloaded updated rpms into (so Yast has no knowledge of them...)! I tried changing "installation media" to the download directory (in this case /root/home/tmp) but this didn't work either. In the end I tried installing XFree 3.2.2 using rpm (with -U option), but one of the components clashed with ps-1.12.2-5 and refused to install... Also how do you install netscape.rpm without conflicting with the ntscp (Netscape script) thing already installed? Cheers Paul -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] RPM on Suse
by mikl＠mail.club-internet.fr 15 Mar '98

15 Mar '98

Hi, Could you tell me if the RPM found on the RedHat ftp site works well with Suse ? What kind of RPM should I choose (Source or binaries for 4.2 or 5.0) ? Thanks in advance for your help. /---Mickael-------------/ / mikl(a)club-internet.fr / / UIN : 2265396 / /-----------------------/ -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] XFree86 3.2.2 Thanks SuSE
by hettar＠teleport.com 15 Mar '98

15 Mar '98

--------------CAD750477E1F6799B9360CB2 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Thanks a bunch SuSE!!! I gota say XFree 3.2.2 was simple to download from ftp.suse.com and install with Yast. I gota say I was useing SuSE X servers before and Xfree86 incorperated them into 3.2.2 and they a hell of alot better. Just awesome!!! If you are usen SuSE's X servers upgrade now with 3.2.2 !!! Thanks a bunch SuSE. Anyway you can get a realaudio rmp up for us ? Btw how about adding the ability to use .deb packages Debian has some nice nice packages. SuSE rocks!!! -- Steven Udell Wayfarers hettar(a)teleport.com for truth love sudell(a)teleport.com and courage <A HREF="http://www.teleport.com/~hettar"><A HREF="http://www.teleport.com/~hettar</A">http://www.teleport.com/~hettar</A</A>> --------------CAD750477E1F6799B9360CB2 Content-Type: text/html; charset=us-ascii Content-Transfer-Encoding: 7bit <HTML> Thanks a bunch SuSE!!! I gota say XFree 3.2.2 was simple to download from ftp.suse.com and install with Yast. I gota say I was useing SuSE X servers before and Xfree86 incorperated them into 3.2.2 and they a hell of alot better. Just awesome!!! If you are usen SuSE's X servers upgrade now with 3.2.2 !!! Thanks a bunch SuSE. Anyway you can get a realaudio rmp up for us ? Btw how about adding the ability to use .deb packages Debian has some nice nice packages. SuSE rocks!!! -- Steven Udell Wayfarers hettar(a)teleport.com for truth love sudell(a)teleport.com and courage http://www.teleport.com/~hettar">http://www.teleport.com/~hettar</A> </HTML> --------------CAD750477E1F6799B9360CB2-- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

RE: [S.u.S.E. Linux] YaST, kerneld, and psaux
by frozen＠airmail.net 15 Mar '98

15 Mar '98

Thanks, you were right about YaST, but my mouse still doesn't work. For some strange reason when LILO boots the kernel, 2.0.30 runs and no kerneld or mouse support. But if I boot off of the bootdisk I made during the install, then 2.0.33 runs and I have no problems. Does anyone have any ideas on how I can fix this? Thanks in advance. Kevin. >The fact that YaST keeps comeing up would indicate you didn't let YaST >finish it >'s work. there's a point there where it runs a bunch of setup scripts >(you can >see the output on... tty9, I think). Many first time SuSErs like to >reboot here >. I know I did. >On 14-Mar-98 froZen wrote: >> >>I've just installed suse 5.1 and I have three problems that may be >>related to each other. One is that every time I reboot, YaST comes up. >>Once it sees that there is nothing to do it closes. The next thing I >>noticed is that kerneld is not started. Then I get the message from gpm >>that my ps2 mouse is not found. I do have alias char-major-10 psaux in >>my /etc/conf.modules and /dev/mouse linked to /dev/psaux. My mouse did >>work when I first installed and it lets you test gpm. It also worked >>when after installing everything YaST closes and brings you to the >>command line for the first time. But after I rebooted my mouse wasn't >>found. Any Ideas? -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Need help with LILO
by n5xwb＠inetport.com 15 Mar '98

15 Mar '98

philsf(a)altavista.net wrote: > Hello ALL, > > I'm not quite sure if this is the right place to post this question, but I > really don't know any other option, in this particular case. > > I installed LILO in the MBR of the HD which hosts my linux partition and my > win95 ones. The problem is, when I deleted my linux partition to re-install > i later, I lost the ability to boot Win95, because LILO could not find the > Linux Native partition. My question is: HOW can I remove LILO from the MBR, > without repartitioning the whole HD? And, can I use LILO from anywhere but > the MBR and the floppy (I saw another option in the Slackware install, I > think it had something to do with the root parition of linux, but dunno for > sure...) > > In advance, I thank you all > > -- > Felipe Figueiredo > Felipe Figueiredo > > With your Windoze boot disk type "fdisk /mbr". This assumes you have fdisk on your boot floppy. That will erase your LILO mbr and install a Windoze ONLY mbr. It will then boot Windoze directly. Good Luck 73 from Donn aka N5XWB n5xwb(a)inetport.com -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] kenel directory
by n5xwb＠inetport.com 15 Mar '98

15 Mar '98

Neil Zanella wrote: > Looks like S.u.S.E. forgot to create the following symbolic link for you: > > ln -s /usr/src/linux-2.0.32 /usr/src/linux > > I hope this will be fixed in future releases. > > > > > The installation guide for SuSE 5.1 says that the config files are in > > /usr/src/linux. The closest thing I have is /usr/src/linux-2.0.32 Why > > don't I have a directory here simply called /linux? Can this be causing > > problems when I'm compiling. > > > > I'm getting an error message something like, "nothing to act upon" or > > "target...stopping." Sorry, I forgot to write it down. make dep & make > > clean are ok, but I can't seem to make zImage. > > -- > As a matter of interest I found the following in SuSE 5.1. > lrwxrwxrwx 1 root root 23 Feb 15 04:08 linux -> > linux-2.0.33.pre.SuSE.3/ > drwxr-xr-x 15 root root 1024 Feb 15 12:46 > linux-2.0.33.pre.SuSE.3/ > drwxr-xr-x 7 root root 1024 Feb 15 04:04 packages/ Donn n5xwb(a)inetport.com -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] connecting with Samba to NT
by weis＠dom.hws.edu 15 Mar '98

15 Mar '98

I have problems to connect from a Linux(Samba) computer to NT. I can connect without any problems from NT to Linux. The name pservgul is in the host file in the DNS and the computer name is pservgul. I am sure about that. weis@test:/home/weis > smbclient \\\\pservgul\\netlogon Added interface ip=172.30.10.24 bcast=172.30.255.255 nmask=255.255.0.0 Session request failed (131,130) with myname=TEST destname=PSERVGUL Called name not present Try to connect to another name (instead of PSERVGUL) You may find the -I option useful for this weis@test:/home/weis > smbclient //pservgul/netlogon Added interface ip=172.30.10.24 bcast=172.30.255.255 nmask=255.255.0.0 Session request failed (131,130) with myname=TEST destname=PSERVGUL Called name not present Try to connect to another name (instead of PSERVGUL) You may find the -I option useful for this I get the same when I try it with the -I option. When I use nmblookup I get that: weis@test:/home/weis > nmblookup pservgul Sending queries to 172.30.255.255 name_query failed to find name pservgul weis@test:/home/weis > nmblookup -A pservgul Sending queries to 172.30.255.255 Looking up status of 172.30.10.30 <<< That is the right IP address. No status response (this is not unusual) weis@test:/var/lock > more browse.dat "HWSMICRO" c0001000 "PSERVGUL" "HWSMICRO" "TEST" 40019a03 "Samba 1.9.18p2" "HWSMICRO" "PSERVGUL" 4006120b "" "HWSMICRO" Does someone know what I do wrong? The network uses a scope id. I do not know if that is important but Samba is configured to the right scope id. I get the same problem if I have NT and samba without a scope id. Thanx for any help Dominik Weis -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] Need help with LILO
by philsf＠altavista.net 15 Mar '98

15 Mar '98

Hello ALL, I'm not quite sure if this is the right place to post this question, but I really don't know any other option, in this particular case. I installed LILO in the MBR of the HD which hosts my linux partition and my win95 ones. The problem is, when I deleted my linux partition to re-install i later, I lost the ability to boot Win95, because LILO could not find the Linux Native partition. My question is: HOW can I remove LILO from the MBR, without repartitioning the whole HD? And, can I use LILO from anywhere but the MBR and the floppy (I saw another option in the Slackware install, I think it had something to do with the root parition of linux, but dunno for sure...) In advance, I thank you all -- Felipe Figueiredo Felipe Figueiredo -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] libjpeg.a
by mperry＠basin.com 15 Mar '98

15 Mar '98

"W.D.McKinney" <deem(a)wdm.com> wrote: > > Does SuSE 5.0 have libjpeg.a in it ? > And if not, where in 5.1 is it at all I see a libjpeg in the gra group. Is this what you are talking about? > Thanks > -Dee > > -- > To get out of this list, please send email to majordomo(a)suse.com > with > this text in its body: unsubscribe suse-linux-e -- --Michael Perry-- mperry(a)basin.com -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] libjpeg.a
by deem＠wdm.com 15 Mar '98

15 Mar '98

Does SuSE 5.0 have libjpeg.a in it ? And if not, where in 5.1 is it at all ? Thanks -Dee -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] Manual Page 132 for NT & SuSE 5.1 ?
by deem＠wdm.com 15 Mar '98

15 Mar '98

After having to load NT 4.0 recently, and then reloading SuSE 5.1 on the system like this : Linux: /dev/sdb1 397500 54288 322682 14% / /dev/sdb2 1982006 775387 1104168 41% /usr /dev/sdb4 1547351 51726 1415651 4% /home NT /dev/sda1 (300meg FAT with MS-DOS only & NT bootloader) Drive C /dev/sda2 (700meg FAT with NT 4.0 loaded) Drive D /dev/sda3 (2000meg FAT with misc. file stored.) Drive E Page 132, section 8.6.2 of the SuSE manual for 5.1 has directions for a EIDE sys, but after being careful not to destroy the NT setup, I just threw a bootdisk up and yet to fullu install lilo. What's the best way to set up tyhis SCSI box to boot both OS's from the NT bootloader ? Where do I find the lilo boot sector ? Etc. ? Appreciate the clarification. Dee McKinney W.D.McKinney (Dee) -=- deem(a)wdm.com No claim to fame, just saved by Grace. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] Good Script Book
by jkrough＠chrs1.chem.lsu.edu 14 Mar '98

14 Mar '98

Can someone suggest a good book on writing script. Also what is the script used in files like .xinitrc etc. ? Jerome K. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] remote X
by cbetan＠unet.ve 14 Mar '98

14 Mar '98

Don't forget to read the "How to Run Remote X Applications" Mini-HOWTO; it's focused on security issues... Regards, Carlos Betancourt CETI-UNET Venezuela -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] Playing au and wav in Netscape
by adcarlso＠visinet.ca 14 Mar '98

14 Mar '98

I have been attempting to play au and wav files in Netscape Communicator 4.04. At the command prompt level this is easy. I have tried 'play' as the application to play wav files from Netscape and all I get is a message back saying that the file length is wrong. For au, I know cat filename.au > /dev/audio can be used but how do I do this in the form of a Netscape usable application? Or are there other players that are usable? Thanks ---------------------------------- Arlen Carlson adcarlso(a)visinet.ca Man is the best computer we can put aboard a spacecraft ... and the only one that can be mass produced with unskilled labor. -- Wernher von Braun This message was sent by XFMail (LINUX) ---------------------------------- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] Install Linux 5.1 S.u.S.E and W95/WNT4.
by fmc＠redestb.es 14 Mar '98

14 Mar '98

Hello linux users. I have installed in my computer WINDOWS95, WINDOWSNT 4.0 and I have tried to install Linux 5.1 S.u.S.E. Before I had RedHat 5.0 and it activated it with the BOOT MANAGER of PARTITION MAGIC. When I am finishing installing Linux 5.1 S.u.S.E and I configure LILO I tell him that it starts up from first sector of my root partition. When intent to start up from BOOT MANAGER tells me that the partition (/ - /dev/sda3) is not formated. I already say that with REDHAT LINUX 5.0 works me perfectly. That I am making bad? If there is somebody that has this same configuration and it works him well he would thank him their advice. Thanks in advance. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Displaying an X client from a remote computer
by jkrough＠mindspring.com 14 Mar '98

14 Mar '98

Mohammed Alsani wrote: > If I login to a remote machine from home machine by dialing in, say by Seyon > or some other hyperterminal programm, how can I an X client from the remote > computer. > I tried xhost + and setenv DISPLAY, the result was (cann't open display). > > Any suggestions are appreciated > -- > If I am not mistaken you need to use either a PPP or SLIP connection. Jerome K. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] networking help please
by adavis＠hayson.vmarketing.com 14 Mar '98

14 Mar '98

On Sat, Mar 14, 1998 at 01:27:22PM -0500, Michael Galloway wrote: > > good day all ... > > here is the system: micron xku/suse5.1/3com905 vortex. > > i cannot get networking to work even though it looks like > it should be. i configure appropriate ipaddr/netmask/gateway > during the install. when i cat /proc/net/dev i get appropriate > entries for the loopback interface, but where eth0 shold be > there is an entry for dummy0 with no statistics available. > > during boot (and if i try to start networking by hand) these > messages get logged: > > Starting up network device eth0. > SIOCSIFADDR: no such device > SIOCSIFBRDADDR: no such device > SIOCDIFNETMASK: no such device. > > i must have made a mistake somewhere during the install. could some > kind soul tell me how to fix this one? thanks in advance! Looks like you may not have the device driver for the vortex loaded. If you know that it is then you need to find out what version it is; you might need to upgrade the device driver. Some people have reported problems with the vortex and boomerang network cards. -- Andrew L. Davis Network Operations adavis(a)vmarketing.com ViperLink International -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] Re: networking help please
by mantel＠suse.de 14 Mar '98

14 Mar '98

Hi, On Sat, 14 Mar 1998, Michael Galloway wrote: > good day all ... > > here is the system: micron xku/suse5.1/3com905 vortex. > > i cannot get networking to work even though it looks like > it should be. i configure appropriate ipaddr/netmask/gateway > during the install. when i cat /proc/net/dev i get appropriate > entries for the loopback interface, but where eth0 shold be > there is an entry for dummy0 with no statistics available. > > during boot (and if i try to start networking by hand) these > messages get logged: > > Starting up network device eth0. > SIOCSIFADDR: no such device > SIOCSIFBRDADDR: no such device > SIOCDIFNETMASK: no such device. > > i must have made a mistake somewhere during the install. could some > kind soul tell me how to fix this one? thanks in advance! Make sure you have the line alias eth0 3c59x in your /etc/conf.modules > -- michael galloway Hubert -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] network fixed. thanks
by mgx＠spruce.lsd.ornl.gov 14 Mar '98

14 Mar '98

thanks, i found the switch in /etc/conf.modules for eth0 and now its working fine. sorry for going off half cocked! -- -- michael -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] networking help please
by mgx＠spruce.lsd.ornl.gov 14 Mar '98

14 Mar '98

good day all ... here is the system: micron xku/suse5.1/3com905 vortex. i cannot get networking to work even though it looks like it should be. i configure appropriate ipaddr/netmask/gateway during the install. when i cat /proc/net/dev i get appropriate entries for the loopback interface, but where eth0 shold be there is an entry for dummy0 with no statistics available. during boot (and if i try to start networking by hand) these messages get logged: Starting up network device eth0. SIOCSIFADDR: no such device SIOCSIFBRDADDR: no such device SIOCDIFNETMASK: no such device. i must have made a mistake somewhere during the install. could some kind soul tell me how to fix this one? thanks in advance! -- -- michael galloway -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] Displaying an X client from a remote computer
by alsani＠merwan.sunyerie.edu 14 Mar '98

14 Mar '98

If I login to a remote machine from home machine by dialing in, say by Seyon or some other hyperterminal program, how can I DISPLAY an X client from the remote computer. I tried (xhost + ....) & (setenv DISPLAY ....) , the result was (cann't open display). Also I edited the hosts, hosts.allow to include the name of the remote machine. Any suggestions are appreciated. M. Alsani -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] Displaying an X client from a remote computer
by alsani＠merwan.sunyerie.edu 14 Mar '98

14 Mar '98

If I login to a remote machine from home machine by dialing in, say by Seyon or some other hyperterminal programm, how can I an X client from the remote computer. I tried xhost + and setenv DISPLAY, the result was (cann't open display). Any suggestions are appreciated -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] remote X
by jkrough＠mindspring.com 14 Mar '98

14 Mar '98

I believe this is the correct method though you made need to make some changes for your setup On machine 2 you need to use xhost + this allows anybody to display just about anything on machine 2 logon to machine 1 from machine 2 etenv DISPLAY machine 2:0 is whatever IP machine 2 is then however you start your window manager This works for me though I only use it to run emacs, netscape, etc and not the window manager which I run locally. Jerome K. At 03:02 PM 3/14/98 +0000, you wrote: > >How do I start X from another machine on my network?? > >Machine 1 >Pentium 166/48 Mb RAM/192.168.1.1 > >Machine 2 >486SX33/8 Mb RAM/192.168.1.2 > >I would like to start and run X from the pentium and display X on the >486. I have tried using startx and it always starts from the 486. If >I use X :192.168.1.1:0, I can start X, but have no display manager. > >I'm kind of lost!!! > >Thanks > >mc > > > >-- >To get out of this list, please send email to majordomo(a)suse.com with >this text in its body: unsubscribe suse-linux-e > -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] remote X
by mclark＠datsrvr.datsit.com 14 Mar '98

14 Mar '98

How do I start X from another machine on my network?? Machine 1 Pentium 166/48 Mb RAM/192.168.1.1 Machine 2 486SX33/8 Mb RAM/192.168.1.2 I would like to start and run X from the pentium and display X on the 486. I have tried using startx and it always starts from the 486. If I use X :192.168.1.1:0, I can start X, but have no display manager. I'm kind of lost!!! Thanks mc -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] kenel directory
by lavoie＠netcom.ca 14 Mar '98

14 Mar '98

Success. Thanks. Now I'm going to start over #-). I installed SuSE over an existing installation, and I think I wasted alot of disk space. I'm weighing in at over 500mb for the installation. Seems like way too much, given my package choices. I think I should have wiped the partition first. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

RE: [S.u.S.E. Linux] YaST, kerneld, and psaux
by gecko＠freecar.com 14 Mar '98

14 Mar '98

The fact that YaST keeps comeing up would indicate you didn't let YaST finish it 's work. there's a point there where it runs a bunch of setup scripts (you can see the output on... tty9, I think). Many first time SuSErs like to reboot here . I know I did. On 14-Mar-98 froZen wrote: > >I've just installed suse 5.1 and I have three problems that may be >related to each other. One is that every time I reboot, YaST comes up. >Once it sees that there is nothing to do it closes. The next thing I >noticed is that kerneld is not started. Then I get the message from gpm >that my ps2 mouse is not found. I do have alias char-major-10 psaux in >my /etc/conf.modules and /dev/mouse linked to /dev/psaux. My mouse did >work when I first installed and it lets you test gpm. It also worked >when after installing everything YaST closes and brings you to the >command line for the first time. But after I rebooted my mouse wasn't >found. Any Ideas? > Kevin. >-- >To get out of this list, please send email to majordomo(a)suse.com with >this text in its body: unsubscribe suse-linux-e ---------------------------------- <A HREF="http://homepages.skylink.net/~gecko/index.html"><A HREF="http://homepages.skylink.net/~gecko/index.html</A">http://homepages.skylink.net/~gecko/index.html</A</A>> -----BEGIN GEEK CODE BLOCK----- Version: 3.1 GCS d+(-) s:+ a29 C++$ UL++>++++ P+++$ L++>++++ E? W+++$ N+(-) o? K- w+++$(--) O M-- V- PS-- PE++ Y++ PGP++ t+ 5 X R+ !tv b++++ DI+++ D++ G++>G+++ e h+ r* y+ ------END GEEK CODE BLOCK------ <A HREF="http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html"><A HREF="http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html</A">http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html</A</A>> ---------------------------------- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] Kernel build question
by weekleyj＠fastrans.net 14 Mar '98

14 Mar '98

What's the easiest way of setting "-O6 -mpentium" wile building a new kernel? I'm using egcs compiler for this (which supports these flags). I have a P-233 processor, and I'd really like to see what it can do with the right optimizations. Even setting these within the makefile produces the "-m486" flag. Not harmful, I know, but I'd like better. Thanks John Weekley -- Any sufficiently advanced technology is indistinguishable from a rigged demo. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] PPP vs. SLIP
by markh＠usai.asiainfo.com 14 Mar '98

14 Mar '98

>In VERY VERY simple terms: protocol is nothing more than a specified way of >soing something. PPP and SLIP describe to a programmer a way of connecting to >other computers. the TCP, UDP and IP talk tell us ways of getting sending >information back and forth... etc. > >the best place to start would be in a general networking book... don't have a >title, though. One very good general book is "Computer Networks" by Andrew Tannenbaum. For writing code "Unix Network Programming" by Richard Stevens can't be beat. (gratuitous plug) Chapter 7 of "Effective Tcl/Tk Programming" shows an interesting approach to defining network application protocols. Hope this helps, Mark. markh(a)usai.asiainfo.com Mark Harrison, AsiaInfo Computer Networks, Beijing, China -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] YaST, kerneld, and psaux
by frozen＠airmail.net 14 Mar '98

14 Mar '98

I've just installed suse 5.1 and I have three problems that may be related to each other. One is that every time I reboot, YaST comes up. Once it sees that there is nothing to do it closes. The next thing I noticed is that kerneld is not started. Then I get the message from gpm that my ps2 mouse is not found. I do have alias char-major-10 psaux in my /etc/conf.modules and /dev/mouse linked to /dev/psaux. My mouse did work when I first installed and it lets you test gpm. It also worked when after installing everything YaST closes and brings you to the command line for the first time. But after I rebooted my mouse wasn't found. Any Ideas? Kevin. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] hardware upgrades, etc
by mperry＠basin.com 14 Mar '98

14 Mar '98

Hi all- I am interested in getting good and bad stories about the Matrox Millenium 2 8mb pci video card, I also would like some recommendations regarding a dscsi cd burner. Also considering one of the new ultradma 6 gig eide hard disk drives from ibm or WD corp.. Does anyone use matrox mill 2 with wabi? I cannot run X at 24 with my matrox 2 mb card at this point. Can anyone with the 2mb pci matrox card? If so, care to share your XF86Config? I am holding out hope that caldera releases a 16 bpp mode patch for wabi... Thanks, And happy weekend!! -- --Michael Perry-- mperry(a)basin.com -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] kenel directory
by lach＠lach.net 14 Mar '98

14 Mar '98

Ron, The way you tell a file is symlink is to do a ls -l <filename> and if the first chartacter is a 'l' then it is a symlink, if not it is not. Colour is not a good measure of a file type, everyones system could be setup differently. Lach Ron Lavoie wrote: > Actually, /usr/src/linux contains only one entry: linux-2.0.32. I think > it's the symbolic link because it's a brighter white. %-) > > /usr/src/linux-2.0.32 *does* contain Makefile (or is it in > usr/src/linux-2.0.32/arch/i386/boot? I can't remember). > > At 16:13 98-03-13 -0800, you wrote: > > > >Does the file /usr/src/linux/Makefile exist? > > > >---------------------------------- > ><A HREF="http://homepages.skylink.net/~gecko/index.html"><A HREF="http://homepages.skylink.net/~gecko/index.html</A">http://homepages.skylink.net/~gecko/index.html</A</A>> > >-----BEGIN GEEK CODE BLOCK----- > >Version: 3.1 > >GCS d+(-) s:+ a29 C++$ UL++>++++ P+++$ L++>++++ E? W+++$ N+(-) o? K- > w+++$(--) > >O M-- V- PS-- PE++ Y++ PGP++ t+ 5 X R+ !tv b++++ > > DI+++ D++ G++>G+++ e h+ r* y+ > >------END GEEK CODE BLOCK------ > >---------------------------------- > >-- > >To get out of this list, please send email to majordomo(a)suse.com with > >this text in its body: unsubscribe suse-linux-e > > > > > -- > To get out of this list, please send email to majordomo(a)suse.com with > this text in its body: unsubscribe suse-linux-e -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] kenel directory
by gecko＠freecar.com 14 Mar '98

14 Mar '98

On 14-Mar-98 Ron Lavoie wrote: >Actually, /usr/src/linux contains only one entry: linux-2.0.32. I think >it's the symbolic link because it's a brighter white. %-) There's your problem. /usr/src should contain the symbolic link: linux-->/usr/src/linux-2.0.32 delete link in the linux directory and then remove the linux directory itself (not the linux-2.0.32... just the linux). Then, from /usr/src execute the link command: ln -s /usr/src/linux-2.0.32 linux both the linux-2.0.32 and the linux "directories" should be in the /usr/src and when you cd /usr/src/linux it should look (because it is) identical to /usr/src/linux-2.0.32 >/usr/src/linux-2.0.32 *does* contain Makefile (or is it in >usr/src/linux-2.0.32/arch/i386/boot? I can't remember). > It's /usr/src/linux-2.0.32 ---------------------------------- <A HREF="http://homepages.skylink.net/~gecko/index.html"><A HREF="http://homepages.skylink.net/~gecko/index.html</A">http://homepages.skylink.net/~gecko/index.html</A</A>> -----BEGIN GEEK CODE BLOCK----- Version: 3.1 GCS d+(-) s:+ a29 C++$ UL++>++++ P+++$ L++>++++ E? W+++$ N+(-) o? K- w+++$(--) O M-- V- PS-- PE++ Y++ PGP++ t+ 5 X R+ !tv b++++ DI+++ D++ G++>G+++ e h+ r* y+ ------END GEEK CODE BLOCK------ ---------------------------------- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] kenel directory
by weekleyj＠fastrans.net 14 Mar '98

14 Mar '98

Ron Lavoie wrote: > > Actually, /usr/src/linux contains only one entry: linux-2.0.32. I think > it's the symbolic link because it's a brighter white. %-) > > /usr/src/linux-2.0.32 *does* contain Makefile (or is it in > usr/src/linux-2.0.32/arch/i386/boot? I can't remember). > > At 16:13 98-03-13 -0800, you wrote: > > Yep, /usr/src/linux is a symbolic link to /usr/src/linux-2.0.32 ln -s /usr/src/linux-2.0.32 /usr/src/linux, should work unless your sources are incomplete or installed incorrectly. John Weekley -- Any sufficiently advanced technology is indistinguishable from a rigged demo. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] kenel directory
by bb＠suse.com 14 Mar '98

14 Mar '98

Ron Lavoie wrote: > > Actually, /usr/src/linux contains only one entry: linux-2.0.32. I think > it's the symbolic link because it's a brighter white. %-) > > /usr/src/linux-2.0.32 *does* contain Makefile (or is it in > usr/src/linux-2.0.32/arch/i386/boot? I can't remember). OK, then do this as root: cd /usr/src/linux-2.0.32 rm linux cd .. ln -s linux-2.0.32 linux cd linux make menuconfig ... Ciao, BB -- Bodo Bauer S.u.S.E., LLC fon +1-510-835 7873 bb(a)suse.de 458 Santa Clara Avenue fax +1-510-835 7875 <A HREF="http://www.suse.com"><A HREF="http://www.suse.com</A">http://www.suse.com</A</A>> Oakland CA, 94610 USA -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] kenel directory
by lavoie＠netcom.ca 14 Mar '98

14 Mar '98

Actually, /usr/src/linux contains only one entry: linux-2.0.32. I think it's the symbolic link because it's a brighter white. %-) /usr/src/linux-2.0.32 *does* contain Makefile (or is it in usr/src/linux-2.0.32/arch/i386/boot? I can't remember). At 16:13 98-03-13 -0800, you wrote: > >Does the file /usr/src/linux/Makefile exist? > >---------------------------------- ><A HREF="http://homepages.skylink.net/~gecko/index.html"><A HREF="http://homepages.skylink.net/~gecko/index.html</A">http://homepages.skylink.net/~gecko/index.html</A</A>> >-----BEGIN GEEK CODE BLOCK----- >Version: 3.1 >GCS d+(-) s:+ a29 C++$ UL++>++++ P+++$ L++>++++ E? W+++$ N+(-) o? K- w+++$(--) >O M-- V- PS-- PE++ Y++ PGP++ t+ 5 X R+ !tv b++++ > DI+++ D++ G++>G+++ e h+ r* y+ >------END GEEK CODE BLOCK------ >---------------------------------- >-- >To get out of this list, please send email to majordomo(a)suse.com with >this text in its body: unsubscribe suse-linux-e > > -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] kenel directory
by gecko＠freecar.com 14 Mar '98

14 Mar '98

Does the file /usr/src/linux/Makefile exist? ---------------------------------- <A HREF="http://homepages.skylink.net/~gecko/index.html"><A HREF="http://homepages.skylink.net/~gecko/index.html</A">http://homepages.skylink.net/~gecko/index.html</A</A>> -----BEGIN GEEK CODE BLOCK----- Version: 3.1 GCS d+(-) s:+ a29 C++$ UL++>++++ P+++$ L++>++++ E? W+++$ N+(-) o? K- w+++$(--) O M-- V- PS-- PE++ Y++ PGP++ t+ 5 X R+ !tv b++++ DI+++ D++ G++>G+++ e h+ r* y+ ------END GEEK CODE BLOCK------ ---------------------------------- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] PPP vs. SLIP
by bb＠suse.com 14 Mar '98

14 Mar '98

gecko(a)freecar.com wrote: > > In VERY VERY simple terms: protocol is nothing more than a specified way of > soing something. PPP and SLIP describe to a programmer a way of connecting to > other computers. the TCP, UDP and IP talk tell us ways of getting sending > information back and forth... etc. > > the best place to start would be in a general networking book... don't have a > title, though. This is _the_ book on UNIX network programming: Unix Network Programming, Richard Stevens $68.00, 772 pages Published by Prentice Hall ISBN: 0139498761 To get deeper into the protocols look ionto the RFCs, which come with our CD... Ciao, BB -- Bodo Bauer S.u.S.E., LLC fon +1-510-835 7873 bb(a)suse.de 458 Santa Clara Avenue fax +1-510-835 7875 <A HREF="http://www.suse.com"><A HREF="http://www.suse.com</A">http://www.suse.com</A</A>> Oakland CA, 94610 USA -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] kenel directory
by lavoie＠netcom.ca 14 Mar '98

14 Mar '98

I'm sure. At 15:56 98-03-13 -0800, you wrote: > >check to make sure you're in the right directory... I know it sounds simple but >I've made that mistake a few times when I first started out. >On 13-Mar-98 Ron Lavoie wrote: >>I created the link, but whether I type: >>make config >>make menu config >>or >>make xconfig (in a window) >>I get the error message: >>No rule to make target "menuconfig". Stop. >> > >---------------------------------- ><A HREF="http://homepages.skylink.net/~gecko/index.html"><A HREF="http://homepages.skylink.net/~gecko/index.html</A">http://homepages.skylink.net/~gecko/index.html</A</A>> >-----BEGIN GEEK CODE BLOCK----- >Version: 3.1 >GCS d+(-) s:+ a29 C++$ UL++>++++ P+++$ L++>++++ E? W+++$ N+(-) o? K- w+++$(--) >O M-- V- PS-- PE++ Y++ PGP++ t+ 5 X R+ !tv b++++ > DI+++ D++ G++>G+++ e h+ r* y+ >------END GEEK CODE BLOCK------ >---------------------------------- >-- >To get out of this list, please send email to majordomo(a)suse.com with >this text in its body: unsubscribe suse-linux-e > > -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] kenel directory
by nzanella＠cs.mun.ca 14 Mar '98

14 Mar '98

Well, sorry then, I'm afraid I don't know the answer to your problem then, sorry, Neil Zanella nzanella(a)ganymede.cs.mun.ca On Fri, 13 Mar 1998, Ron Lavoie wrote: > > I created the link, but whether I type: > make config > make menu config > or > make xconfig (in a window) > I get the error message: > No rule to make target "menuconfig". Stop. > > > At 18:30 98-03-13 -0500, you wrote: > > > >Is that all I have to do, create that symbolic link? > > > >At 19:17 98-03-13 -0330, you wrote: > >> > >> > >>Looks like S.u.S.E. forgot to create the following symbolic link for you: > >> > >>ln -s /usr/src/linux-2.0.32 /usr/src/linux > >> > >>I hope this will be fixed in future releases. > > -- > To get out of this list, please send email to majordomo(a)suse.com with > this text in its body: unsubscribe suse-linux-e > -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] kenel directory
by gecko＠freecar.com 14 Mar '98

14 Mar '98

check to make sure you're in the right directory... I know it sounds simple but I've made that mistake a few times when I first started out. On 13-Mar-98 Ron Lavoie wrote: >I created the link, but whether I type: >make config >make menu config >or >make xconfig (in a window) >I get the error message: >No rule to make target "menuconfig". Stop. > ---------------------------------- <A HREF="http://homepages.skylink.net/~gecko/index.html"><A HREF="http://homepages.skylink.net/~gecko/index.html</A">http://homepages.skylink.net/~gecko/index.html</A</A>> -----BEGIN GEEK CODE BLOCK----- Version: 3.1 GCS d+(-) s:+ a29 C++$ UL++>++++ P+++$ L++>++++ E? W+++$ N+(-) o? K- w+++$(--) O M-- V- PS-- PE++ Y++ PGP++ t+ 5 X R+ !tv b++++ DI+++ D++ G++>G+++ e h+ r* y+ ------END GEEK CODE BLOCK------ ---------------------------------- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] kenel directory
by nzanella＠cs.mun.ca 14 Mar '98

14 Mar '98

I believe so. Try it and let me know if that's not all you need to do. Neil Zanella nzanella(a)ganymede.cs.mun.ca On Fri, 13 Mar 1998, Ron Lavoie wrote: > > Is that all I have to do, create that symbolic link? > > At 19:17 98-03-13 -0330, you wrote: > > > > > >Looks like S.u.S.E. forgot to create the following symbolic link for you: > > > >ln -s /usr/src/linux-2.0.32 /usr/src/linux > > > >I hope this will be fixed in future releases. > > > >Neil Zanella > >nzanella(a)ganymede.cs.mun.ca > > > >On Fri, 13 Mar 1998, Ron Lavoie wrote: > > > >> > >> The installation guide for SuSE 5.1 says that the config files are in > >> /usr/src/linux. The closest thing I have is /usr/src/linux-2.0.32 Why > >> don't I have a directory here simply called /linux? Can this be causing > >> problems when I'm compiling. > >> > >> I'm getting an error message something like, "nothing to act upon" or > >> "target...stopping." Sorry, I forgot to write it down. make dep & make > >> clean are ok, but I can't seem to make zImage. > >> -- > >> To get out of this list, please send email to majordomo(a)suse.com with > >> this text in its body: unsubscribe suse-linux-e > >> > > > >-- > >To get out of this list, please send email to majordomo(a)suse.com with > >this text in its body: unsubscribe suse-linux-e > > > > > -- > To get out of this list, please send email to majordomo(a)suse.com with > this text in its body: unsubscribe suse-linux-e > -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] kenel directory
by lavoie＠netcom.ca 13 Mar '98

13 Mar '98

I created the link, but whether I type: make config make menu config or make xconfig (in a window) I get the error message: No rule to make target "menuconfig". Stop. At 18:30 98-03-13 -0500, you wrote: > >Is that all I have to do, create that symbolic link? > >At 19:17 98-03-13 -0330, you wrote: >> >> >>Looks like S.u.S.E. forgot to create the following symbolic link for you: >> >>ln -s /usr/src/linux-2.0.32 /usr/src/linux >> >>I hope this will be fixed in future releases. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] kenel directory
by lavoie＠netcom.ca 13 Mar '98

13 Mar '98

Is that all I have to do, create that symbolic link? At 19:17 98-03-13 -0330, you wrote: > > >Looks like S.u.S.E. forgot to create the following symbolic link for you: > >ln -s /usr/src/linux-2.0.32 /usr/src/linux > >I hope this will be fixed in future releases. > >Neil Zanella >nzanella(a)ganymede.cs.mun.ca > >On Fri, 13 Mar 1998, Ron Lavoie wrote: > >> >> The installation guide for SuSE 5.1 says that the config files are in >> /usr/src/linux. The closest thing I have is /usr/src/linux-2.0.32 Why >> don't I have a directory here simply called /linux? Can this be causing >> problems when I'm compiling. >> >> I'm getting an error message something like, "nothing to act upon" or >> "target...stopping." Sorry, I forgot to write it down. make dep & make >> clean are ok, but I can't seem to make zImage. >> -- >> To get out of this list, please send email to majordomo(a)suse.com with >> this text in its body: unsubscribe suse-linux-e >> > >-- >To get out of this list, please send email to majordomo(a)suse.com with >this text in its body: unsubscribe suse-linux-e > > -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] Nslookup... help
by scastell＠wavenet.it 13 Mar '98

13 Mar '98

I would like to have "nslookup" command and you told me that it is in package "n" -> "Bind" and it' s true but in the same package there is a DNS server that I don' t need and I don' t want to install. Please, if you can, mail me "nslookup" executable alone. Thanks. I' m trying to compile Xagent but I get a lot of errors and compilation stops. Is there any pre-compiled Xagent for Suse (possibly rpmed)? I' ve installed "nn" news reader remote nntp version from Yast but when I type "nn", I get "Segmentation fault" and nothing else. What can I do? Thanks for your answers. Bye. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

RE: [S.u.S.E. Linux] PPP vs. SLIP
by gecko＠freecar.com 13 Mar '98

13 Mar '98

In VERY VERY simple terms: protocol is nothing more than a specified way of soing something. PPP and SLIP describe to a programmer a way of connecting to other computers. the TCP, UDP and IP talk tell us ways of getting sending information back and forth... etc. the best place to start would be in a general networking book... don't have a title, though. On 13-Mar-98 Neil Zanella wrote: >What exactly is a protocol. I would like to see the code for >PPP, SLIP, TCP, IP, CSLIP, PAP, etc... > ---------------------------------- <A HREF="http://homepages.skylink.net/~gecko/index.html"><A HREF="http://homepages.skylink.net/~gecko/index.html</A">http://homepages.skylink.net/~gecko/index.html</A</A>> -----BEGIN GEEK CODE BLOCK----- Version: 3.1 GCS d+(-) s:+ a29 C++$ UL++>++++ P+++$ L++>++++ E? W+++$ N+(-) o? K- w+++$(--) O M-- V- PS-- PE++ Y++ PGP++ t+ 5 X R+ !tv b++++ DI+++ D++ G++>G+++ e h+ r* y+ ------END GEEK CODE BLOCK------ ---------------------------------- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] kenel directory
by nzanella＠cs.mun.ca 13 Mar '98

13 Mar '98

Looks like S.u.S.E. forgot to create the following symbolic link for you: ln -s /usr/src/linux-2.0.32 /usr/src/linux I hope this will be fixed in future releases. Neil Zanella nzanella(a)ganymede.cs.mun.ca On Fri, 13 Mar 1998, Ron Lavoie wrote: > > The installation guide for SuSE 5.1 says that the config files are in > /usr/src/linux. The closest thing I have is /usr/src/linux-2.0.32 Why > don't I have a directory here simply called /linux? Can this be causing > problems when I'm compiling. > > I'm getting an error message something like, "nothing to act upon" or > "target...stopping." Sorry, I forgot to write it down. make dep & make > clean are ok, but I can't seem to make zImage. > -- > To get out of this list, please send email to majordomo(a)suse.com with > this text in its body: unsubscribe suse-linux-e > -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] PPP vs. SLIP
by nzanella＠cs.mun.ca 13 Mar '98

13 Mar '98

Why is PPP better than SLIP? What exactly is a protocol. I would like to see the code for PPP, SLIP, TCP, IP, CSLIP, PAP, etc... How many megs do the source/binaries for these take. Are they written in C? If so, is it ANSI C? Thanks, Neil Zanella nzanella(a)ganymede.cs.mun.ca -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Do in need to setup a PPP route? question part 2
by jboonen＠worldonline.nl 13 Mar '98

13 Mar '98

Can you please sent your options file? Thank you very much. Luis A. Costabile wrote: > On Fri, 13 Mar 1998, JJM Boonen wrote: > > > I'm sorry maybe it's a dumb question, but what do i have to enter in the > > option file and where? > > > > > > Luis A. Costabile wrote: > > > > > On Fri, 13 Mar 1998, JJM Boonen wrote: > > > > > > > Can someone tell me if i need to set up a rout for ppp? If i use PPP > > > > connection? > > > > Can someone please tell me how is should do it? > > > > > > You should not have to, the kernel and pppd take care of that if you put > > > defaultroute in your /etc/ppp/options file. > > On a line by itself in the file /etc/ppp/options > > defaultroute > > If you want I'll email you my /etc/ppp/options file, if you think that > would help. > > -- > Lou A. Costabile Voice and Fax: [613] 781-7061 > <A HREF="mailto:luis@lac.resonet.com">mailto:luis@lac.resonet.com</A> > To get Receipt Notification include %rec% anywhere in the Subject field. > -- > > -- > To get out of this list, please send email to majordomo(a)suse.com with > this text in its body: unsubscribe suse-linux-e -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Do in need to setup a PPP route? question part 2
by luis＠lac.resonet.com 13 Mar '98

13 Mar '98

On Fri, 13 Mar 1998, JJM Boonen wrote: > I'm sorry maybe it's a dumb question, but what do i have to enter in the > option file and where? > > > Luis A. Costabile wrote: > > > On Fri, 13 Mar 1998, JJM Boonen wrote: > > > > > Can someone tell me if i need to set up a rout for ppp? If i use PPP > > > connection? > > > Can someone please tell me how is should do it? > > > > You should not have to, the kernel and pppd take care of that if you put > > defaultroute in your /etc/ppp/options file. On a line by itself in the file /etc/ppp/options defaultroute If you want I'll email you my /etc/ppp/options file, if you think that would help. -- Lou A. Costabile Voice and Fax: [613] 781-7061 <A HREF="mailto:luis@lac.resonet.com">mailto:luis@lac.resonet.com</A> To get Receipt Notification include %rec% anywhere in the Subject field. -- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] kenel directory
by satan＠nfinity.com 13 Mar '98

13 Mar '98

Goto /usr/src and enter: ln -s linux-2.0.32 linux Ron Lavoie wrote: > The installation guide for SuSE 5.1 says that the config files are in > /usr/src/linux. The closest thing I have is /usr/src/linux-2.0.32 Why > don't I have a directory here simply called /linux? Can this be causing > problems when I'm compiling. > > I'm getting an error message something like, "nothing to act upon" or > "target...stopping." Sorry, I forgot to write it down. make dep & make > clean are ok, but I can't seem to make zImage. > -- > To get out of this list, please send email to majordomo(a)suse.com with > this text in its body: unsubscribe suse-linux-e -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Do in need to setup a PPP route? question part 2
by jboonen＠worldonline.nl 13 Mar '98

13 Mar '98

I'm sorry maybe it's a dumb question, but what do i have to enter in the option file and where? Luis A. Costabile wrote: > On Fri, 13 Mar 1998, JJM Boonen wrote: > > > Can someone tell me if i need to set up a rout for ppp? If i use PPP > > connection? > > Can someone please tell me how is should do it? > > You should not have to, the kernel and pppd take care of that if you put > defaultroute in your /etc/ppp/options file. > > -- > Lou A. Costabile Voice and Fax: [613] 781-7061 > <A HREF="mailto:luis@lac.resonet.com">mailto:luis@lac.resonet.com</A> > To get Receipt Notification include %rec% anywhere in the Subject field. > -- > > -- > To get out of this list, please send email to majordomo(a)suse.com with > this text in its body: unsubscribe suse-linux-e -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] kenel directory
by lavoie＠netcom.ca 13 Mar '98

13 Mar '98

The installation guide for SuSE 5.1 says that the config files are in /usr/src/linux. The closest thing I have is /usr/src/linux-2.0.32 Why don't I have a directory here simply called /linux? Can this be causing problems when I'm compiling. I'm getting an error message something like, "nothing to act upon" or "target...stopping." Sorry, I forgot to write it down. make dep & make clean are ok, but I can't seem to make zImage. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Do in need to setup a PPP route?
by luis＠lac.resonet.com 13 Mar '98

13 Mar '98

On Fri, 13 Mar 1998, JJM Boonen wrote: > Can someone tell me if i need to set up a rout for ppp? If i use PPP > connection? > Can someone please tell me how is should do it? You should not have to, the kernel and pppd take care of that if you put defaultroute in your /etc/ppp/options file. -- Lou A. Costabile Voice and Fax: [613] 781-7061 <A HREF="mailto:luis@lac.resonet.com">mailto:luis@lac.resonet.com</A> To get Receipt Notification include %rec% anywhere in the Subject field. -- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Very new...
by gecko＠freecar.com 13 Mar '98

13 Mar '98

On 13-Mar-98 Paul groves wrote: >around with RedHat), does the following sound like a sensible partition >set-up (for a single user dialup\graphics workstaion)*?: > > (snip) >/ 100Mb >/home 100Mb I find I run out of space in my home directory a lot either /root or /home which ever. Even though I'm single user, I still store most of my stuff in /home/gecko.. the stuff I"m working with playing with... ---------------------------------- <A HREF="http://homepages.skylink.net/~gecko/index.html"><A HREF="http://homepages.skylink.net/~gecko/index.html</A">http://homepages.skylink.net/~gecko/index.html</A</A>> -----BEGIN GEEK CODE BLOCK----- Version: 3.1 GCS d+(-) s:+ a29 C++$ UL++>++++ P+++$ L++>++++ E? W+++$ N+(-) o? K- w+++$(--) O M-- V- PS-- PE++ Y++ PGP++ t+ 5 X R+ !tv b++++ DI+++ D++ G++>G+++ e h+ r* y+ ------END GEEK CODE BLOCK------ ---------------------------------- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Elementary ftp questions
by zentara＠mindspring.com 13 Mar '98

13 Mar '98

John Weekley wrote: > zentara wrote: > > but I can't get to my ftp directory in /usr/local/ftp > > with <A HREF="ftp://192.168.0.1"><A HREF="ftp://192.168.0.1</A">ftp://192.168.0.1</A</A>> > > I get no connection. Why? > > > Hi, I can't help with the samba stuff (I use NFS, no M$ here :), but > maybe I can shed some light on the ftp question. > First of all, you're not really being dumped into the "/" filesystem. > What's happening is that due to default security you're being put into > /usr/local/ftp as you want. What's going on is that there's a way of > making your ftp directory be "/" for ftp users only, see man chroot. > This way, anonymous FTP'ers can't get out of the /usr/local/ftp > directory and wreak havoc on your system. Your ftp directory becomes > the / filesystem. > > As to why you can't see anything, I'll take a guess and say your file > permissions don't allow anything to be seen. > The docs for the wu-ftpd cover all this pretty well, especially the > chroot part, and MOST IMPORTANTLY the file premissions needed to run a > secure server. > > John Weekley Thanks for detailing that for me. I did sort of figure out it worked that way, by playing around with it. I came to see that to get anonymous ftp, you have to log on as "ftp" and send a blank password. If you log on as a user, you get then start ftp, you get dumped in your home directory. I see the benefit in doing it this way. What I really would like to understand is how to get into anonymous ftp via Netscape on a win95 machine connected via ethernet. I guess the question is why does the http daemon listen to my ethernet card address, but the ftp daemon dosn't ? How do I instruct the ftp daemon to listen to eth0, and put all requests into /usr/local/ftp? I read man ftpd but couldn't make alot of sense out of it. I'm trying to set up a little ethernet lan to practice web and ftp procedures. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] compiling pppd / shadow suite
by luis＠lac.resonet.com 13 Mar '98

13 Mar '98

I'm trying to recompile pppd. I want to apply a patch to it, but before I do I wanted to make sure it compiles properly BEFORE I make the patch. The version on suse is ppp-2.2.0f . The docs for this say the following... 5a. Support for shadow passwords To compile the pppd process with support for shadow passwords you must first have compiled the shadow password suite and have it installed into the /usr/include and /usr/lib directories. Rather than using the simple make command mentioned above, issue the command: make HAS_SHADOW=1 So, I installed the sources for the shadow suite and installed it, but the compile of pppd doesn't go, I get this error. auth.c:54: shadow/pwauth.h: No such file or directory make[1]: *** [auth.o] Error 1 I can make this error go away by "fixing" auth.c to point to where pwauth.h is, but then I run into another problem, the linker ld complains about lshadow. I don't think the shadow suite is being installed correctly. Is there something I need to do different for suse 5.1 ? Btw, a simple make works ok, but then I don't have support for shadow in my pppd. -- Lou A. Costabile Voice and Fax: [613] 781-7061 <A HREF="mailto:luis@lac.resonet.com">mailto:luis@lac.resonet.com</A> To get Receipt Notification include %rec% anywhere in the Subject field. -- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] chmod syntax
by pkirk＠enterprise-hr.com 13 Mar '98

13 Mar '98

I am planning to set up Linux as a database server this weekend and have just completed installing SuSe 5.1. All is working (after considerable help from this mailing group) except I have no way of writing to the SMB shares. The key directory is called dbserver. Its permissions are -dwrx-rx-x-. in smb.conf its permissions are set by change mode = 0775. Users can see the database, read data but not update it. I have tried chmod +rwx dbserver, chmod a+rwx /dbserver, etc but cannot make it rw x for all users which is what I need? Man chmod says it may be out of date and refers to texinfo. Man texinfo doesn't exist. What am I doing wrong? Best regards, Patrick Kirk Enterprise Human Resources Tel: 0044 118 939 1122 Fax: 0044 118 939 3388 Executive Opportunities at www.enterprise-hr.com E-mail pkirk(a)enterprise-hr.com -----Original Message----- From: Paul groves [SMTP:paul.groves@computing-services.oxford.ac.uk] Sent: Friday, 13 March 1998 12:30 To: Michael Lankton Cc: suse-linux-e(a)suse.com Subject: Re: [S.u.S.E. Linux] Very new... On Thu, 12 Mar 1998, Michael Lankton wrote: > Until NT5 and directX 6, Windows95/98 are the only platform(s) for those of > us who like games. NT4 just isn't game/hardware friendly. Hopefully other > developers will follow id software's lead and offer linux bins for their > games in the future, but until then I'm keeping a partition for windows. I don't suppose anyone knows if Civilisation II runs on NT 4.0? If so I'd quite happily dump Windows 95! (apart from games, I also need a Windows OS for Photoshop 4...) Hope to install S.u.S.E. Linux 5.1 this w\e (In the past I've played around with RedHat), does the following sound like a sensible partition set-up (for a single user dialup\graphics workstaion)*?: * see bottom for equipment stats On the (slowish) 512Mb drive: / 100Mb /home 100Mb /usr/local - the rest (for non-rpm s/w etc.) On the (faster) 3.2Mb Drive /win95 or /winnt - 1Gb (FAT32 if win95, NTFS if Winnt) /data 1Gb (FAT - so I can share data, including large TIFF files, between the two OS) /swap 64Mb (I do a fair bit of graphics stuff with quite large TIFF files) /usr The rest! BTW: Equipment stats: 200Mhz MMX CPU, 32Mb SDRAM, 4MB Matrox Millenium II graphics card, 3.2GB Quanum Fireball H\D and also an old Western Digital 512Mb HD. Paul -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] elm problems
by K.Y.Lo＠soton.ac.uk 13 Mar '98

13 Mar '98

Hi I create mail in a new directory. My User is kyl, create a new folder. It says:- Notice: This version of ELM requires the use of a .elm directory in your home directory to store your elmrc and alias files. Shall I create the directory .elm for you and set it up (y/n/q)? Yes. Great! I'll do it now. Notice: ELM requires the use of a folders directory to store your mail folders in. Shall I create the directory /home/kyl/Mail for you (y/n/q)? Yes. Great! I'll do it now. Can't open folder '/var/spool/mail/kyl/test' for reading! How? Thank you -- Cheers K.Y.Lo Email: kyl(a)soton.ac.uk -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Very new...
by paul.groves＠computing-services.oxford.ac.uk 13 Mar '98

13 Mar '98

On Thu, 12 Mar 1998, Michael Lankton wrote: > Until NT5 and directX 6, Windows95/98 are the only platform(s) for those of > us who like games. NT4 just isn't game/hardware friendly. Hopefully other > developers will follow id software's lead and offer linux bins for their > games in the future, but until then I'm keeping a partition for windows. I don't suppose anyone knows if Civilisation II runs on NT 4.0? If so I'd quite happily dump Windows 95! (apart from games, I also need a Windows OS for Photoshop 4...) Hope to install S.u.S.E. Linux 5.1 this w\e (In the past I've played around with RedHat), does the following sound like a sensible partition set-up (for a single user dialup\graphics workstaion)*?: * see bottom for equipment stats On the (slowish) 512Mb drive: / 100Mb /home 100Mb /usr/local - the rest (for non-rpm s/w etc.) On the (faster) 3.2Mb Drive /win95 or /winnt - 1Gb (FAT32 if win95, NTFS if Winnt) /data 1Gb (FAT - so I can share data, including large TIFF files, between the two OS) /swap 64Mb (I do a fair bit of graphics stuff with quite large TIFF files) /usr The rest! BTW: Equipment stats: 200Mhz MMX CPU, 32Mb SDRAM, 4MB Matrox Millenium II graphics card, 3.2GB Quanum Fireball H\D and also an old Western Digital 512Mb HD. Paul -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Do in need to setup a PPP route?
by stugreen＠bga.com 13 Mar '98

13 Mar '98

Joop, The easiest method is to download the ezppp rpm from ftp.redhat.com. It's in the /pub/contrib/i386 directory (alternately, a 'site exec locate ezppp' will yield the loc, if it has changed). Install the rpm, configure ezppp - the script usually consists of: expect ogin: send (P)username [some ISPs require the Pusername login for ppp] expect Password: send (user's password) Enjoy, Stu -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] Cyrix MX CPU
by jkrough＠mindspring.com 13 Mar '98

13 Mar '98

Is there any benefit to compiling the kernel using the PPro cpu? The Cyrix MX cpu's are identified as a PPro by cpuid and I am curious if there are any benefits or problems compared to compiling as a pentium cpu. Jerome K. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Elementary samba and ftp questions
by weekleyj＠fastrans.net 13 Mar '98

13 Mar '98

> but I can't get to my ftp directory in /usr/local/ftp > with <A HREF="ftp://192.168.0.1"><A HREF="ftp://192.168.0.1</A">ftp://192.168.0.1</A</A>> > I get no connection. Why? > > Also if I <A HREF="ftp://localhost"><A HREF="ftp://localhost</A">ftp://localhost</A</A>> on the linux machine, I'm > accepted as anonymous user, but am dumped into "/" > with no file access. > > How do I get ftp access into /usr/local/ftp? > > I checked Yast under user ftp, and the home directory > is shown as /usr/local/ftp. Why do I get sent to a > useless "/". > > I've heard this stuff is supposed to be "easy as pie", > but I'm lucky I got this far. :-) > > zentara Hi, I can't help with the samba stuff (I use NFS, no M$ here :), but maybe I can shed some light on the ftp question. First of all, you're not really being dumped into the "/" filesystem. What's happening is that due to default security you're being put into /usr/local/ftp as you want. What's going on is that there's a way of making your ftp directory be "/" for ftp users only, see man chroot. This way, anonymous FTP'ers can't get out of the /usr/local/ftp directory and wreak havoc on your system. Your ftp directory becomes the / filesystem. As to why you can't see anything, I'll take a guess and say your file permissions don't allow anything to be seen. The docs for the wu-ftpd cover all this pretty well, especially the chroot part, and MOST IMPORTANTLY the file premissions needed to run a secure server. John Weekley -- Any sufficiently advanced technology is indistinguishable from a rigged demo. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] Q about install rpm
by s2197577＠cse.unsw.edu.au 13 Mar '98

13 Mar '98

Hi, all I'm very new to SuSe linux. I have a simple question. How I can install these RPMS, from RedHat powertools, on SuSe linux box. When I try to install it, I've got these message. # rpm -ivh xfinans-5.9-2.i386.rpm failed dependencies: libc.so.6 is needed by xfinans-5.9-2 ld-linux.so.2 is needed by xfinans-5.9-2 # rpm -ivh xinvest-2.5.1-2.i386.rpm failed dependencies: libm.so.6 is needed by xinvest-2.5.1-2 libc.so.6 is needed by xinvest-2.5.1-2 libXm.so.0 is needed by xinvest-2.5.1-2 ld-linux.so.2 is needed by xinvest-2.5.1-2 Any help would be appreciate. Cheers jae -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] Do in need to setup a PPP route?
by jboonen＠worldonline.nl 13 Mar '98

13 Mar '98

Hi all, Can someone tell me if i need to set up a rout for ppp? If i use PPP connection? Can someone please tell me how is should do it? Thank you very much. Regards, Joop Boonen. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Elementary samba and ftp questions
by gecko＠freecar.com 13 Mar '98

13 Mar '98

Do you use the same user loggin on both machines? Here's my smbmount command mbmount //fortunet2/source /fortunet/s -U win95usr -P win95pw -g 101 -f 770 -d 770 the machines is //fortunet2 (duh) and the directory share is named source. The actually directory is named something horrendous like c:\show95a\class32a\dformnw\. and it's mounted on directory /fortunet/s win95usr is not my real user name but is used for example... win95pw is not the password but used for example... 101 is the group to assign to the directory and -f -d both deal with permissions on the files... since Win doesn't have them.. they're faked with those options On 13-Mar-98 zentara wrote: >Yeah I tried mount and it wouldn't work. I tried smbmount and >I did get it to ask for a password; then every password I tried failed. > ---------------------------------- <A HREF="http://homepages.skylink.net/~gecko/index.html"><A HREF="http://homepages.skylink.net/~gecko/index.html</A">http://homepages.skylink.net/~gecko/index.html</A</A>> -----BEGIN GEEK CODE BLOCK----- Version: 3.1 GCS d+(-) s:+ a29 C++$ UL++>++++ P+++$ L++>++++ E? W+++$ N+(-) o? K- w+++$(--) O M-- V- PS-- PE++ Y++ PGP++ t+ 5 X R+ !tv b++++ DI+++ D++ G++>G+++ e h+ r* y+ ------END GEEK CODE BLOCK------ <A HREF="http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html"><A HREF="http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html</A">http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html</A</A>> ---------------------------------- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

RE: [S.u.S.E. Linux] Request: PPP Scripts
by gecko＠freecar.com 13 Mar '98

13 Mar '98

Make sure you've installed the inetcfg package and then look in /usr/doc/inetcfg/ppp2. All the scripts you need will be there. On 13-Mar-98 Ron Lavoie wrote: > >Can someone *please send me a set of scripts that work with SuSE 5.1? > >I need: options, resolv.conf, ppp-on-dialer, pap-sectrets, shit, I need >everything. Working through the HOWTO is turning out to be a real bitch, >and the scripts would help alot. > >Thanks in advance, > > > >Ron Lavoie >Toronto >416.533.5715 >-- >To get out of this list, please send email to majordomo(a)suse.com with >this text in its body: unsubscribe suse-linux-e ---------------------------------- <A HREF="http://homepages.skylink.net/~gecko/index.html"><A HREF="http://homepages.skylink.net/~gecko/index.html</A">http://homepages.skylink.net/~gecko/index.html</A</A>> -----BEGIN GEEK CODE BLOCK----- Version: 3.1 GCS d+(-) s:+ a29 C++$ UL++>++++ P+++$ L++>++++ E? W+++$ N+(-) o? K- w+++$(--) O M-- V- PS-- PE++ Y++ PGP++ t+ 5 X R+ !tv b++++ DI+++ D++ G++>G+++ e h+ r* y+ ------END GEEK CODE BLOCK------ <A HREF="http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html"><A HREF="http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html</A">http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html</A</A>> ---------------------------------- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Elementary samba and ftp questions
by zentara＠mindspring.com 13 Mar '98

13 Mar '98

Darren wrote: > > This is a stupid question, I know, but did you use mount or smbmount mount the w > in95 drive... and did you set up sharing (little hand holding the drive icon in > Windows Explorer) on the win95 machine? > > On 12-Mar-98 zentara wrote: > >Question 1: > >I can see my linux home directory in Win95's Network Neighborhood, > >that is expected, but I can't seem to see my win95 c: drive > >from the linux machine. Is this samba server only a one way street? > > Yeah I tried mount and it wouldn't work. I tried smbmount and I did get it to ask for a password; then every password I tried failed. I guess I'll just have to reread man smb. I'm happy enough that I get the win95 machine to get my webpage off of the apache server. Now I can play with cgi and perl. Thanks for thr tips. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Request: PPP Scripts
by fpawlak＠execpc.com 13 Mar '98

13 Mar '98

Ron Lavoie <lavoie(a)netcom.ca> wrote: > > Can someone *please send me a set of scripts that work with SuSE 5.1? > > I need: options, resolv.conf, ppp-on-dialer, pap-sectrets, shit, I > need > everything. Working through the HOWTO is turning out to be a real > bitch, > and the scripts would help alot. > > Thanks in advance, Check out the Linux Journal web site at www.ssc.com in the April 1997 issue there is a article with scripts and other instructions on getting this up and running. This info help and worked well for me the first time I did a dial-up setup on Linux. Also www.sunsite.unc.edu has a directory full of various scripts and things to make this easy. Hope this helps. Frank > > > Ron Lavoie > Toronto > 416.533.5715 > -- > To get out of this list, please send email to majordomo(a)suse.com with > this text in its body: unsubscribe suse-linux-e -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Very new...
by zentara＠mindspring.com 13 Mar '98

13 Mar '98

Richard Sobey wrote: > >> And my last question - will there be any problem with my HD. It's a > >> Maxtor Diamond Max 5Gb (just bought it a few days ago) and I'm having > >> to use the EZ-BIOS that comes with it, since my BIOS doesn't support > >> disks > 2Gb. Do you think it'll be okay? > > Do you mean the fact that FAT isn't efficient with cluster sizes? If > so, I'm not bothered about that. Win95 will be for games only, and > efficiency isn't the prime concern! FAT32 would have been nice, but I > need to see it under NT as well. > No, I mean that fat partitions are limited to 2 gigs, and more importantly you are limited to a 520 meg primary C partion. Of course, you will have alot of slackspace with those cluster sizes. You'll probably lose 15 percent of your disk. > <snip partitioning suggestions> > > Could I just get a copy of Partition Magic, for instance, and divide > up that 1Gb partition into 2 (1x 950 and 1 x 50)? Oh, forgot - I have > to disable EZ-BIOS. But - the bit of paper that came with the HD said > that disabling the EZ-BIOS would render the disk unbootable. True? > No, you can boot without ez-bios; BUT the first primary partition has to be less than 528 megs, and win95 has to go in there. Then you can add 3 more 2 gig primaries, or 2 primaries and an extended dos. But they will not be bootable WITH THE BIOS! NT can be booted from any partition because it puts it's Boot loader on c:\; it's called ntldr. But C has to be less than 528 megs. Linux can be booted from anywhere as long as lilo is on the MBR. There is a good explanation on page 138 of the Suse Manual. The key is that the c partition must be less than 528. EZ-BIOS just lets you make your C partition any size you want, but it messes up Linux. You don't need Partition Magic. Dos's fdisk and linux's fdisk both work fine. Partition Magic can come in handy if you want to resize, or move partitions after they have data in them. But if you are starting from scratch, it does you no good. > >With all those different os'es, you should probably look into > >System Commander, although lilo can always be made to work. > > I'll have a look.. although I'd prefer not to have to buy a > third-party solution. (Partition Magic would be the exception). > Yeah, you don't need to buy anything. Fdisk and lilo work just fine. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Request: PPP Scripts
by satan＠nfinity.com 13 Mar '98

13 Mar '98

This is a multi-part message in MIME format. --------------7653C7A96D83D8C8D268F14F Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hope this helps. Good luck. Ron Lavoie wrote: > Can someone *please send me a set of scripts that work with SuSE 5.1? > > I need: options, resolv.conf, ppp-on-dialer, pap-sectrets, shit, I need > everything. Working through the HOWTO is turning out to be a real bitch, > and the scripts would help alot. > > Thanks in advance, > > Ron Lavoie > Toronto > 416.533.5715 > -- > To get out of this list, please send email to majordomo(a)suse.com with > this text in its body: unsubscribe suse-linux-e --------------7653C7A96D83D8C8D268F14F Content-Type: application/x-tar; name="ppp.tar" Content-Transfer-Encoding: base64 Content-Disposition: inline; filename="ppp.tar" b3B0aW9ucwAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAADEwMDc1NSAA ICAgICAwIAAgICAgIDAgACAgICAgICAgIDcwICA2NTAyMTAwNjE1ICAxMDUwNgAgMAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAB1c3RhciAgAHJvb3QA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAcm9vdAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAABsb2NrCi9kZXYvdHR5UzAKZGVmYXVsdHJvdXRl CmNydHNjdHMKbm9pcGRlZmF1bHQKMTE1MjAwCgAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAHBw cC1vbgAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAxMDA1NTUgACAg ICAgMCAAICAgICAwIAAgICAgICAgIDQzNSAgNjUwMjEwMDY3NCAgMTAyNTQAIDAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAdXN0YXIgIAByb290AAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAHJvb3QAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAIyEvYmluL3NoClRFTEVQSE9ORT01NTUtMTIxMgpB Q0NPVU5UPXlvdXJuYW1laGVyZQpQQVNTV09SRD14eHh4eHgKTE9DQUxfSVA9MC4wLjAuMApS RU1PVEVfSVA9MC4wLjAuMApORVRNQVNLPTI1NS4yNTUuMjU1LjAKZXhwb3J0IFRFTEVQSE9O RSBBQ0NPVU5UIFBBU1NXT1JECkRJQUxFUl9TQ1JJUFQ9L3Jvb3QvcHBwZGlhbApleGVjIC91 c3Ivc2Jpbi9wcHBkIGRlYnVnIC9kZXYvdHR5UzAgMTE1MjAwIFwKICAgICRMT0NBTF9JUDok UkVNT1RFX0lQIFwKICAgIGNvbm5lY3QgJERJQUxFUl9TQ1JJUFQKAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAABwcHBk aWFsAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAMTAwNTU1IAAgICAg IDAgACAgICAgMCAAICAgICAgICA2MTIgIDY1MDIxMDA2MDEgIDEwNDU3ACAwAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAHVzdGFyICAAcm9vdAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAByb290AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAACMhL2Jpbi9zaAovdXNyL3NiaW4vY2hhdCAtdgkJCQkJ ICAgIFwKICAgIFRJTUVPVVQJCTMJCQkgICAgIFwKICAgIEFCT1JUCQknXG5CVVNZXHInCQkg ICAgIFwKICAgIEFCT1JUCQknXG5OTyBBTlNXRVJccicJCSAgICAgXAogICAgQUJPUlQJCSdc blJJTkdJTkdcclxuXHJcblJJTkdJTkdccicgXAogICAgJycJCQlcckFUCQkJICAgICBcCiAg ICAnT0stKysrXGMtT0snICAgICAJQVRIMCAgICAgICAgICAgICAJICAgICBcCiAgICBUSU1F T1VUCQkzMAkJCSAgICAgXAogICAgT0sJCQlBVERUJFRFTEVQSE9ORQkJICAgICBcCiAgICBD T05ORUNUCQknJwkJCSAgICAgXAogICAgb2dpbjotLW9naW46CSRBQ0NPVU5UCQkgICAgIFwK ICAgIGFzc3dvcmQ6CQkkUEFTU1dPUkQJCSAgICAgXAogICAgCQoAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA== --------------7653C7A96D83D8C8D268F14F-- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Request: PPP Scripts
by satan＠nfinity.com 13 Mar '98

13 Mar '98

Sorry about that everyone, I meant to send that to Ron and not the whole group. My bad -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

RE: [S.u.S.E. Linux] Elementary samba and ftp questions
by gecko＠freecar.com 13 Mar '98

13 Mar '98

This is a stupid question, I know, but did you use mount or smbmount mount the w in95 drive... and did you set up sharing (little hand holding the drive icon in Windows Explorer) on the win95 machine? On 12-Mar-98 zentara wrote: >Question 1: >I can see my linux home directory in Win95's Network Neighborhood, >that is expected, but I can't seem to see my win95 c: drive >from the linux machine. Is this samba server only a one way street? > ---------------------------------- <A HREF="http://homepages.skylink.net/~gecko/index.html"><A HREF="http://homepages.skylink.net/~gecko/index.html</A">http://homepages.skylink.net/~gecko/index.html</A</A>> -----BEGIN GEEK CODE BLOCK----- Version: 3.1 GCS d+(-) s:+ a29 C++$ UL++>++++ P+++$ L++>++++ E? W+++$ N+(-) o? K- w+++$(--) O M-- V- PS-- PE++ Y++ PGP++ t+ 5 X R+ !tv b++++ DI+++ D++ G++>G+++ e h+ r* y+ ------END GEEK CODE BLOCK------ <A HREF="http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html"><A HREF="http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html</A">http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html</A</A>> ---------------------------------- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] Request: PPP Scripts
by lavoie＠netcom.ca 13 Mar '98

13 Mar '98

Can someone *please send me a set of scripts that work with SuSE 5.1? I need: options, resolv.conf, ppp-on-dialer, pap-sectrets, shit, I need everything. Working through the HOWTO is turning out to be a real bitch, and the scripts would help alot. Thanks in advance, Ron Lavoie Toronto 416.533.5715 -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Hosts Problem
by bb＠suse.de 12 Mar '98

12 Mar '98

Jim Hatridge wrote: > > Thank you and the others on the list for the help and info. I've got it > working now. You're right I had to turn off the proxy. > > NOW, my question is "what does the proxy do for me?" If I can get to the > net without it, why not? It seems to me that it is just one less machine > to go though to get to the net. Can you shed some light on this? > The main advantage of HTTP proxies is, that they usaly cache the reqested pages. If you request a page that another user (using the same proxie) reqested before, the proxy will send it's copy to you if there is no new version of it in the original server. So the proxy speed up things for you and reduces the overall traffic on the internet. Ciao, BB -- Bodo Bauer S.u.S.E., LLC fon +1-510-835 7873 bb(a)suse.de 458 Santa Clara Avenue fax +1-510-835 7875 http//www.suse.com Oakland CA, 94610 USA -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Elementary samba and ftp questions
by pbleser＠prov-liege.be 12 Mar '98

12 Mar '98

> >Hello, >After seeing all the recent posts on samba, I decided >to try an hook my old 486 with win95, up to my linux >box. > >Everything seems to work except for a few unexpected >things. I'm used to the peer-to-peer win95 style >of networking where you can see evrything on both computers. > >I'm connected via ethernet cards, with TCP/IP > linux = 192.168.0.1 > win95 = 192.168.0.2 > >Question 1: >I can see my linux home directory in Win95's Network Neighborhood, >that is expected, but I can't seem to see my win95 c: drive >from the linux machine. Is this samba server only a one way street? > No, but you have to setup the shares... You can see your home because it's in the default configuration file: take a look at /etc/smb.conf and: man smb.conf >Question 2: >If I fire up Netscape on the win95 machine, I can get my >apache web page with <A HREF="http://192.168.0.1"><A HREF="http://192.168.0.1</A">http://192.168.0.1</A</A>> > >but I can't get to my ftp directory in /usr/local/ftp >with <A HREF="ftp://192.168.0.1"><A HREF="ftp://192.168.0.1</A">ftp://192.168.0.1</A</A>> >I get no connection. Why? > >Also if I <A HREF="ftp://localhost"><A HREF="ftp://localhost</A">ftp://localhost</A</A>> on the linux machine, I'm >accepted as anonymous user, but am dumped into "/" >with no file access. > >How do I get ftp access into /usr/local/ftp? > >I checked Yast under user ftp, and the home directory >is shown as /usr/local/ftp. Why do I get sent to a >useless "/". > >I've heard this stuff is supposed to be "easy as pie", >but I'm lucky I got this far. :-) > >zentara > >-- >To get out of this list, please send email to majordomo(a)suse.com with >this text in its body: unsubscribe suse-linux-e > -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] Elementary samba and ftp questions
by zentara＠mindspring.com 12 Mar '98

12 Mar '98

Hello, After seeing all the recent posts on samba, I decided to try an hook my old 486 with win95, up to my linux box. Everything seems to work except for a few unexpected things. I'm used to the peer-to-peer win95 style of networking where you can see evrything on both computers. I'm connected via ethernet cards, with TCP/IP linux = 192.168.0.1 win95 = 192.168.0.2 Question 1: I can see my linux home directory in Win95's Network Neighborhood, that is expected, but I can't seem to see my win95 c: drive from the linux machine. Is this samba server only a one way street? Question 2: If I fire up Netscape on the win95 machine, I can get my apache web page with <A HREF="http://192.168.0.1"><A HREF="http://192.168.0.1</A">http://192.168.0.1</A</A>> but I can't get to my ftp directory in /usr/local/ftp with <A HREF="ftp://192.168.0.1"><A HREF="ftp://192.168.0.1</A">ftp://192.168.0.1</A</A>> I get no connection. Why? Also if I <A HREF="ftp://localhost"><A HREF="ftp://localhost</A">ftp://localhost</A</A>> on the linux machine, I'm accepted as anonymous user, but am dumped into "/" with no file access. How do I get ftp access into /usr/local/ftp? I checked Yast under user ftp, and the home directory is shown as /usr/local/ftp. Why do I get sent to a useless "/". I've heard this stuff is supposed to be "easy as pie", but I'm lucky I got this far. :-) zentara -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: Re: [S.u.S.E. Linux] PPPD Dies
by jkrough＠mindspring.com 12 Mar '98

12 Mar '98

>>>>>>>>>>>>>>>>>> Original Messsage <<<<<<<<<<<<<<<<<< On 12/03/98, 09:31:24, jkrough(a)mindspring.com (Jerome Krough) wrote regarding Re: Re: [S.u.S.E. Linux] PPPD Dies: > > : > :I had the same prob. Does your login take a long time? If it does then your IRQ for your modem is not set correctly. I was able to dial out with my modem when it was set to IRQ 3, but in windows it is 9. So if this is your problem then you need to use "setserial". > : > :Hope this helps, > :Matt > : > Thanks that did the trick. PPPD still dies though I still have a working connection when it does. I get an error message in /var/log/messages that says something like "timed out getting IPX configuration" then pppd dies. I am not using the IPX protocol to connect to my ISP and I am assuming that there is a "switch" or something along those lines that I can use to tell pppd not to bother with IPX. I am unsure what it is though. > > Jerome K. > -- > To get out of this list, please send email to majordomo(a)suse.com with > this text in its body: unsubscribe suse-linux-e > I have recompiled the kernel with out the IPX protocol and get the following message: IPX support is not present in the kernel The connection still works and maybe I am just uneccessarily paranoid but I have the feeling that something is not quite right. For those interested StarOffice 4.0 has a pretty decent email tool Jerome K. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] Re: [Fwd: XFree86 3.3.2 released]
by mantel＠suse.de 12 Mar '98

12 Mar '98

Hi, On Thu, 12 Mar 1998, Tom Schaefer wrote: > Will this be in SuSE 5.2? Of course. It's running here already ;-) Hubert -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] [Fwd: XFree86 3.3.2 released]
by pbleser＠prov-liege.be 12 Mar '98

12 Mar '98

I pretty sure: it's available on the SuSE ftp server !! -----Message d'origine----- De : Tom Schaefer <tschaefe(a)paging.mot.com> À : suse-linux-e(a)suse.com <suse-linux-e(a)suse.com> Date : jeudi 12 mars 1998 22:46 Objet : [S.u.S.E. Linux] [Fwd: XFree86 3.3.2 released] > > > >Will this be in SuSE 5.2? > > > > > > > -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] [Fwd: XFree86 3.3.2 released]
by tschaefe＠paging.mot.com 12 Mar '98

12 Mar '98

This is a multi-part message in MIME format. --------------53B39BDE217BD2AE9BD7D559 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Will this be in SuSE 5.2? --------------53B39BDE217BD2AE9BD7D559 Content-Type: message/rfc822 Content-Transfer-Encoding: 7bit Content-Disposition: inline From: robin(a)interlabs.com (Robin Cutshaw) Subject: XFree86 3.3.2 released Followup-To: comp.os.linux.misc Date: Fri, 6 Mar 1998 09:59:39 GMT Approved: linux-announce(a)news.ornl.gov (Mikko Rauhala) Message-ID: <pycola.889178380.18407(a)laulujoutsen.pc.helsinki.fi> Reply-To: XFree86(a)XFree86.Org NNTP-Posting-Host: laulujoutsen.pc.helsinki.fi Old-Date: 6 Mar 1998 03:37:22 GMT X-No-Archive: yes X-Auth: PGPMoose V1.1 PGP comp.os.linux.announce iQCVAgUBNP/JC1rUI/eHXJZ5AQFxxgP/Sy2M6vc+386+58pTGJEbSj3c6oLXUEC0 6RfCTFuJq/c8lmyi7Wg4bsIPy7oqqlrmPcG0mRBIweNa5oTBgEmYTU2GE1w8MJj4 7iP7qlv7HgwnqrS1EZMD3u2h75SVxQ7ZNCkiB5KRCJXEIial9SZl7IA5VdQ4gPUX vY5VHey2yJE= =K5x5 Path: nserv2.paging.mot.com!newshost.mot.com!newsgate.mot.com!news.xnet.com!news-chi-1.sprintlink.net!news-east.sprintlink.net!news-peer.sprintlink.net!news.sprintlink.net!Sprint!news.maxwell.syr.edu!uninett.no!news.algonet.se!news-feed.inet.tele.dk!bofh.vszbr.cz!newsfeed.sollentuna.se!news-feed.sto.telegate.se!nntp.inet.fi!news.funet.fi!news.helsinki.fi!not-for-mail -----BEGIN PGP SIGNED MESSAGE----- Announcing the Release of XFree86[tm] 3.3.2 5 March 1998 XFree86 version 3.3.2 is now available. The XFree86 3.3 distribution is available in both source and binary form. Binary distributions are currently available for FreeBSD (2.2.2+ and 3.0-CURRENT), NetBSD (1.2 and 1.3), OpenBSD, Interactive Unix, Linux (ix86 and AXP), SVR4.0, UnixWare, OS/2, Solaris 2.6 and LynxOS AT. The XFree86 documentation is available on-line on our Web server. The documentation for 3.3 can be accessed at <A HREF="http://WWW.XFree86.org/3.3/"><A HREF="http://WWW.XFree86.org/3.3/</A">http://WWW.XFree86.org/3.3/</A</A>>. The XFree86 FAQ is at <A HREF="http://WWW.XFree86.org/FAQ/"><A HREF="http://WWW.XFree86.org/FAQ/</A">http://WWW.XFree86.org/FAQ/</A</A>>. Note that the mirror sites listed below are those that have indicated that they will be mirroring this release. Only a small number of sites have done so at this time. XFree86 is a port of X11R6.3 that supports several Unix and Unix-like operating systems on Intel and other platforms. This release consists of new features and performance improvements as well as many bug fixes. . The source distribution is available as both source patches against the X Consortium X11R6.3 code and the XFree86 3.3.1 release. 1. XFree86 and X11R6.3 XFree86 releases starting with the 3.2A beta are based on the X Consortium's X11R6.3 (the final release from the X Consortium). R6.3 is an update to R6.1, and is intended to be compatible with R6.1 and R6 at the source and protocol levels. Binaries should be upward-compatible. X11R6.3 includes some new Xserver extensions: SECURITY, XC-APPGROUP, XpExtension (print extension), and an updated, and standardised version of LBX. X11R6.3 also has new standards, including RX (X Remote Execution MIME type), and a proxy management protocol. X11R6.3 includes support for gzipped fonts. R6.1 is an update to R6, and is intended to be compatible with R6 at the source and protocol levels. Binaries should be upward-compatible. X11R6.1 includes some new Xserver extensions: DOUBLE-BUFFER, XKEYBOARD and RECORD. What about R6.2? X11R6.2 is the name given to a subset of X11R6.3, which has only the print extension and the Xlib implementation of vertical writing and user-defined character support in addition to those features included in R6.1. 2. Revised XFree86 release/access policy As of March 1997, The XFree86 Project has revised its source/binary access and release policy. The main points of the new policy are: o There will be no more time-limited public binary-only beta releases. Instead we plan to increase the frequency of full public releases to about four releases per year. o The source access/use is divided into three categories: o End users. End users have access to only the source of full public releases. The main reason for this restriction is that our development code often contains code from other sources which cannot be released to the public immediately. o Active developers (members of the XFree86 ``developer team''). Active developers must formally become non-voting members of the XFree86 Project, and have full access to our internal development source. They are permitted to make time-limited binaries (in coordination with the Core Team) of the servers they are actively working on available to external testers for specific testing. o Commercial members. Commercial members are non-voting members of The XFree86 Project who donate US$5000/year to the Project. Additionally, companies who contribute significantly to the development effort of XFree86 can be awarded commercial membership by the Core Team on a yearly bases. Commercial members can use the internal XFree86 development source for derived binary-only products providing that they take full responsibility for supporting the product, and don't call it ``XFree86'' (although the derivation of the product must be acknowledged in any accompanying documentation). Binary packages for the OSs we support which are simply compiled from our internal source without significant added value are explicitly NOT allowed. 3. Future Release Plans This release (3.3) is the final release in the 3.x series. If any major problems show up with this release, patches will be made available. All our current work is now going towards the next release, 4.0, with the highlight of this being the loadable module code. 4. New in 3.3.2 4.1 Security fixes o Several buffer overrun problems discovered since the release of XFree86-3.3.1 have been fixed o Several insecure X server command line options have been removed o The X servers now run the xkbcomp program under the user's real uid o Additionally, a wrapper program for the X servers has been added which eliminated the need for the servers to be installed SUID root 4.2 Bug fixes o A black screen problem in the Tseng driver has been fixed. o Several drawing problems in the Tseng driver have been corrected. o Timeouts to all routines waiting for the accelerator have been added. o DPMS has been fixed in the Tseng driver. o The memory clock for the Matrox Millennium II is now set correctly. o Several drawing bugs in the MGA driver have been fixed. o The problem with some Millennium II cards in higher resolutions and 24bpp is fixed. o Some problems with 24 and 32bpp in the Trident driver have been fixed. o Some problems in the C&T driver with the TMED DSTN dithering scheme for the 65555 and 68554 have been fixed. o The C&T driver now adheres much more strictly to the clock limits. o Allow DacSpeed command to work correctly in more servers. o Several small bugs for Cirrus Laguna chipsets have been fixed. o Fixes to the Wacom driver. o The Cyrillic fonts have been updated. o BSDI is supported again. o Several XAA problems have been fixed. o XKB for PC98 has been updated. o S3 Aurora64V+ now works with 16bpp. o cursor offset for some S3 cards has been fixed. o S3 server support for STG 1700 ramdac has been fixed. o imake correctly works on Linux glibc-2 systems now. 4.3 New Features o Support for ET6100 has been added to the Tseng driver. o Acceleration has been added for W32 and W32i. o Text performance has been improved for the Tseng driver. o Support for new RAMDACs, including the ch8398, the ch8391 and the MUSIC MU9C4910 has been added to the Tseng driver. o Accelerated support for the AT3D and AT25 has been added to the APM driver. o Support for accelerated NV1 and accelerated Riva128 has been added to the NV driver. o Support for the Matrox Millennium II AGP has been included into the MGA driver. o New support for several Trident chips has been added, including Cyber9397, 3DImage975 and 3DImage985 (unaccelerated and not completed, yet), TGUI9685. o CrealTV support has been added for the TGUI9685. o Acceleration of all TGUI chipsets has been improved. o Support for Rage Pro based PCI and AGP cards has been added. o Maximum dotclock for newer Mach64 cards has been increased. o Support for 1600x1200 and 1600x1280 mode has been added for VT and newer Mach64 chips. o Support for the auxiliary register aperture for newer Mach64 cards has been added. o Support for the I128 Revolution (T2R) has been added. o Additional acceleration for the I128 server has been added. o Support for sw cursor, pci_retry, 24bpp HW cursor has been added to cirrus Laguna chipsets. o S3 ViRGE/MX and ViRGE/GX2 support has been added (SVGA server only!). o support for S3 ViRGE hardware cursor added in SVGA server. o An S3 driver has been added to the SVGA server. o S3 server and SVGA/S3 server now recognize some fake S3 chips and print out a warning message. o XAA has been extended to support hardware cursors and provide accelerated support dashed lines and trapezoid fills. o Several new mouse protocols have been added to all servers. They should now support Kensington ThinkingMouse, ALPS GlidePoint, Genius NetScroll, Genius NetMouse, Genius NetMouse, ASCII MieMouse, Logitech MouseMan+, Log- itech FirstMouse+. This includes all buttons on these mice as well as the wheels. The wheel can be used to either create additional buttons or for z-axis indication. o login.conf/setusercontext support to xdm for FreeBSD has been added. o XF86Setup now supports setting the default color depth and choosing the modes the user wants to use. o XF86Setup allows to select all the new mouse protocols (depending on the OS it is running on). o Japanization of XF86Setup has been added. o XF98_MGA server for Millennium and Mystique has been added. This server is very new and has some problems with Mystique support. o XF98_SVGA server for CLGD755x has been added. This server also is very new and has some problems. o Linux/98 support has been added. Linux/98 is very new and perhaps the servers also have some problems. o XF98_TGUI server now works on PANIX98. o XF98Setup(i.e. XF86Setup for PC98) has been added. o Many changes to xterm including support for double-size characters (posi- tioning), blinking characters (render in color), improvements to logging, transparent printing, delete/backspace toggle, and better support for Sun and PC keyboards. 4.4 Known Problems o There are problems with some Cirrus laptop chipsets (75xx). The driver seems to work for some people, but not others. Until someone with the appropriate hardware can look into this, these problems are unlikely to be fixed. If you wish to work on this, please contact us. We don't need testers, we need people willing and able to fix the problems. o There are problems with some of the Trident laptop chipsets. The driver seems to work in a limited way for some people, but not others. Until someone with the appropriate hardware can look into this, these problems are unlikely to be fixed. If you wish to work on this, please contact us. We don't need testers, we need people willing and able to fix the prob- lems. 5. Source and binary archive sites Source patches are available to upgrade X11R6.3 PL2 from the X Consortium (now The Open Group) to XFree86 3.3.2. Binaries for many OSs are also available. The distribution is available from: o <A HREF="ftp://ftp.XFree86.org/pub/XFree86"><A HREF="ftp://ftp.XFree86.org/pub/XFree86</A">ftp://ftp.XFree86.org/pub/XFree86</A</A>> and the following mirror sites: o North America: o <A HREF="ftp://ftp2.XFree86.org/pub/XFree86"><A HREF="ftp://ftp2.XFree86.org/pub/XFree86</A">ftp://ftp2.XFree86.org/pub/XFree86</A</A>> (source and binaries) o <A HREF="ftp://ftp.infomagic.com/pub/mirrors/XFree86-current"><A HREF="ftp://ftp.infomagic.com/pub/mirrors/XFree86-current</A">ftp://ftp.infomagic.com/pub/mirrors/XFree86-current</A</A>> (source and bina- ries) o <A HREF="ftp://ftp.rge.com/pub/X/XFree86"><A HREF="ftp://ftp.rge.com/pub/X/XFree86</A">ftp://ftp.rge.com/pub/X/XFree86</A</A>> and <A HREF="http://www.rge.com/pub/X/XFree86"><A HREF="http://www.rge.com/pub/X/XFree86</A">http://www.rge.com/pub/X/XFree86</A</A>> (source and binaries) o <A HREF="ftp://ftp.varesearch.com/pub/mirrors/xfree86"><A HREF="ftp://ftp.varesearch.com/pub/mirrors/xfree86</A">ftp://ftp.varesearch.com/pub/mirrors/xfree86</A</A>> (source and binaries) o <A HREF="ftp://ftp.cs.umn.edu/pub/XFree86"><A HREF="ftp://ftp.cs.umn.edu/pub/XFree86</A">ftp://ftp.cs.umn.edu/pub/XFree86</A</A>> (source and binaries) o <A HREF="ftp://ftp.kernel.org/pub/mirrors/xfree86"><A HREF="ftp://ftp.kernel.org/pub/mirrors/xfree86</A">ftp://ftp.kernel.org/pub/mirrors/xfree86</A</A>> (source and binaries) o Europe: o <A HREF="ftp://fvkma.tu-graz.ac.at/pub/XFree86"><A HREF="ftp://fvkma.tu-graz.ac.at/pub/XFree86</A">ftp://fvkma.tu-graz.ac.at/pub/XFree86</A</A>> (source and binaries) o <A HREF="ftp://gd.tuwien.ac.at/hci/X11/XFree86"><A HREF="ftp://gd.tuwien.ac.at/hci/X11/XFree86</A">ftp://gd.tuwien.ac.at/hci/X11/XFree86</A</A>> and <A HREF="http://gd.tuwien.ac.at/hci/X11/XFree86"><A HREF="http://gd.tuwien.ac.at/hci/X11/XFree86</A">http://gd.tuwien.ac.at/hci/X11/XFree86</A</A>> (source and binaries) o <A HREF="ftp://ftp.fee.vutbr.cz/pub/XFree86"><A HREF="ftp://ftp.fee.vutbr.cz/pub/XFree86</A">ftp://ftp.fee.vutbr.cz/pub/XFree86</A</A>> (source patches and binaries) o <A HREF="ftp://ftp.gwdg.de/pub/xfree86/XFree86"><A HREF="ftp://ftp.gwdg.de/pub/xfree86/XFree86</A">ftp://ftp.gwdg.de/pub/xfree86/XFree86</A</A>> (source and binaries) o <A HREF="ftp://ftp.mpi-sb.mpg.de/pub/X/mirror/ftp.xfree86.org"><A HREF="ftp://ftp.mpi-sb.mpg.de/pub/X/mirror/ftp.xfree86.org</A">ftp://ftp.mpi-sb.mpg.de/pub/X/mirror/ftp.xfree86.org</A</A>> (source and binaries) o <A HREF="ftp://ftp.cs.tu-berlin.de/pub/X/XFree86"><A HREF="ftp://ftp.cs.tu-berlin.de/pub/X/XFree86</A">ftp://ftp.cs.tu-berlin.de/pub/X/XFree86</A</A>> (source and binaries) o <A HREF="ftp://ftp.uni-erlangen.de/pub/Linux/MIRROR.xfree86"><A HREF="ftp://ftp.uni-erlangen.de/pub/Linux/MIRROR.xfree86</A">ftp://ftp.uni-erlangen.de/pub/Linux/MIRROR.xfree86</A</A>> (source and Linux binaries) o <A HREF="ftp://ftp.uni-stuttgart.de/pub/X11/Xfree86"><A HREF="ftp://ftp.uni-stuttgart.de/pub/X11/Xfree86</A">ftp://ftp.uni-stuttgart.de/pub/X11/Xfree86</A</A>> (source and binaries) o <A HREF="ftp://ftp.funet.fi/pub/X11/XFree86"><A HREF="ftp://ftp.funet.fi/pub/X11/XFree86</A">ftp://ftp.funet.fi/pub/X11/XFree86</A</A>> (source and binaries) o <A HREF="ftp://ftp.ibp.fr/pub/X11/XFree86"><A HREF="ftp://ftp.ibp.fr/pub/X11/XFree86</A">ftp://ftp.ibp.fr/pub/X11/XFree86</A</A>> (source and binaries) o <A HREF="ftp://ftp.unina.it/pub/XFree86"><A HREF="ftp://ftp.unina.it/pub/XFree86</A">ftp://ftp.unina.it/pub/XFree86</A</A>> (source and binaries) o <A HREF="ftp://ftp.pvv.unit.no/pub/XFree86"><A HREF="ftp://ftp.pvv.unit.no/pub/XFree86</A">ftp://ftp.pvv.unit.no/pub/XFree86</A</A>> (source and binaries) o <A HREF="ftp://sunsite.doc.ic.ac.uk/packages/XFree86"><A HREF="ftp://sunsite.doc.ic.ac.uk/packages/XFree86</A">ftp://sunsite.doc.ic.ac.uk/packages/XFree86</A</A>> (source and binaries) o Asia/Australia: o <A HREF="ftp://x.physics.usyd.edu.au/pub/XFree86"><A HREF="ftp://x.physics.usyd.edu.au/pub/XFree86</A">ftp://x.physics.usyd.edu.au/pub/XFree86</A</A>> (source and binaries) o <A HREF="ftp://ftp.netlab.is.tsukuba.ac.jp/pub/XFree86"><A HREF="ftp://ftp.netlab.is.tsukuba.ac.jp/pub/XFree86</A">ftp://ftp.netlab.is.tsukuba.ac.jp/pub/XFree86</A</A>> (source and binaries) o <A HREF="ftp://ftp.iij.ad.jp/pub/X/XFree86/XFree86"><A HREF="ftp://ftp.iij.ad.jp/pub/X/XFree86/XFree86</A">ftp://ftp.iij.ad.jp/pub/X/XFree86/XFree86</A</A>> (source and binaries) o <A HREF="ftp://ftp.kreonet.re.kr/pub/Linux/xfree86"><A HREF="ftp://ftp.kreonet.re.kr/pub/Linux/xfree86</A">ftp://ftp.kreonet.re.kr/pub/Linux/xfree86</A</A>> (source and binaries) Ensure that you are getting XFree86 3.3 - some of these sites may archive older releases as well. Check the RELNOTES to find which files you need to take from the archive. The XFree86 Team - -- This article has been digitally signed by the moderator, using PGP. <A HREF="http://www.iki.fi/mjr/cola-public-key.asc"><A HREF="http://www.iki.fi/mjr/cola-public-key.asc</A">http://www.iki.fi/mjr/cola-public-key.asc</A</A>> has PGP key for validating signature. Send submissions for comp.os.linux.announce to: linux-announce(a)news.ornl.gov PLEASE remember a short description of the software and the LOCATION. This group is archived at <A HREF="http://www.iki.fi/liw/linux/cola.html"><A HREF="http://www.iki.fi/liw/linux/cola.html</A">http://www.iki.fi/liw/linux/cola.html</A</A>> -----BEGIN PGP SIGNATURE----- Version: 2.6.3ia Charset: latin1 iQCVAgUBNP/JC1rUI/eHXJZ5AQFeaQQAz1EKJggl0sDsmxtN/VmXrECYgtzfzl0r n1Jg04D/uDifg1BPiapXp3NHdEnoobhn+cJHoobcbrgzg7sbJDctJ2Z/igAIXLPD /9hampSNVF1YW0ciIZLc24bFgAuQckvlhVPnvkkdGL0rRdDf6pB/bUrRTrHbK3vY yAytqlxrsYk= =lSgi -----END PGP SIGNATURE----- --------------53B39BDE217BD2AE9BD7D559-- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Very new...
by nzanella＠cs.mun.ca 12 Mar '98

12 Mar '98

On Thu, 12 Mar 1998, Richard Sobey wrote: If you want to repartition a FAT32 partition then you don't need to buy the commercial partition magic software. You can get the fips15c program that now resizes FAT32 partitions as well as FAT16 partitions. FIPS is avaliable from <A HREF="ftp://bmrc.berkeley.edu/pub/linux/fat32/fips15c.tar.gz"><A HREF="ftp://bmrc.berkeley.edu/pub/linux/fat32/fips15c.tar.gz</A">ftp://bmrc.berkeley.edu/pub/linux/fat32/fips15c.tar.gz</A</A>> at no charge!! (and has yet to fail the shrinking job) > > > >That 5 gig drive is going to be a problem for > >win95 running the fat file system. You will have > >to work around win95 as a stone around your neck. :-) > > Do you mean the fact that FAT isn't efficient with cluster sizes? If > so, I'm not bothered about that. Win95 will be for games only, and > efficiency isn't the prime concern! FAT32 would have been nice, but I > need to see it under NT as well. > > <snip partitioning suggestions> > > Could I just get a copy of Partition Magic, for instance, and divide > up that 1Gb partition into 2 (1x 950 and 1 x 50)? Oh, forgot - I have > to disable EZ-BIOS. But - the bit of paper that came with the HD said > that disabling the EZ-BIOS would render the disk unbootable. True? > > >With all those different os'es, you should probably look into > >System Commander, although lilo can always be made to work. > > I'll have a look.. although I'd prefer not to have to buy a > third-party solution. (Partition Magic would be the exception). > > >I must have rebuilt my drives 100 times when I started messing around > >with multiple operating systems. > > > >NT and Linux don't need ez-bios to see the whole 5 gig. > > Well, since the BIOS won't support partitions > 2Gb anyway, that's not > a problem. > > >Good luck, and you will learn to curse the fat filesystem. > > I already am :-) > > Thanks for the suggestions - keep 'em coming! > > Richard. > -- > To get out of this list, please send email to majordomo(a)suse.com with > this text in its body: unsubscribe suse-linux-e > Neil Zanella nzanella(a)ganymede.cs.mun.ca -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Very new...
by news-reply＠the-annexe.demon.co.uk 12 Mar '98

12 Mar '98

On Wed, 11 Mar 1998 20:41:31 -0500, you wrote: >Richard Sobey wrote: >> And my last question - will there be any problem with my HD. It's a >> Maxtor Diamond Max 5Gb (just bought it a few days ago) and I'm having >> to use the EZ-BIOS that comes with it, since my BIOS doesn't support >> disks > 2Gb. Do you think it'll be okay? >> >I went thru the same bs. First of all , you should get rid of >EZ-BIOS and then proceed from there. EZ-BIOS must go!!! >Linux won't work at all with ez-bios. > >That 5 gig drive is going to be a problem for >win95 running the fat file system. You will have >to work around win95 as a stone around your neck. :-) Do you mean the fact that FAT isn't efficient with cluster sizes? If so, I'm not bothered about that. Win95 will be for games only, and efficiency isn't the prime concern! FAT32 would have been nice, but I need to see it under NT as well. <snip partitioning suggestions> Could I just get a copy of Partition Magic, for instance, and divide up that 1Gb partition into 2 (1x 950 and 1 x 50)? Oh, forgot - I have to disable EZ-BIOS. But - the bit of paper that came with the HD said that disabling the EZ-BIOS would render the disk unbootable. True? >With all those different os'es, you should probably look into >System Commander, although lilo can always be made to work. I'll have a look.. although I'd prefer not to have to buy a third-party solution. (Partition Magic would be the exception). >I must have rebuilt my drives 100 times when I started messing around >with multiple operating systems. > >NT and Linux don't need ez-bios to see the whole 5 gig. Well, since the BIOS won't support partitions > 2Gb anyway, that's not a problem. >Good luck, and you will learn to curse the fat filesystem. I already am :-) Thanks for the suggestions - keep 'em coming! Richard. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Hosts Problem
by hatridge＠straubing.baynet.de 12 Mar '98

12 Mar '98

On Tue, 10 Mar 1998, Bodo Bauer wrote: > > If you use a proxy, the proxy will try to resolv the hostname, not your > lokal host, so you have to make sure, that this line is in /etc/hosts > on the machine, that runs the proxy. > But anyway, I'm not sure if squid uses /etc/hosts at all. It uses a > subprocess called 'dnserver' to speed up DNS rewuests, it may be, that > this bypasses /etc/hosts... > > Disable the proxy in your browser and try again, this should work... > > Ciao, > BB Hi Bodo!, Thank you and the others on the list for the help and info. I've got it working now. You're right I had to turn off the proxy. NOW, my question is "what does the proxy do for me?" If I can get to the net without it, why not? It seems to me that it is just one less machine to go though to get to the net. Can you shed some light on this? Thanks again! JIM ----------------------------------------- Jim Hatridge Germany hatridge(a)straubing.baynet.de ___________ News Flash! -------------- News Flash! ___________________ Yesterday, a ferry boat leaving Haiti sunk and 300 people died, drowned, as the boat capsized. But a tragedy was avoided when they discovered that none of them on board was a Princess. --- Harlan Ellison, InterZone -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: Re: [S.u.S.E. Linux] PPPD Dies
by jkrough＠mindspring.com 12 Mar '98

12 Mar '98

: :I had the same prob. Does your login take a long time? If it does then your IRQ for your modem is not set correctly. I was able to dial out with my modem when it was set to IRQ 3, but in windows it is 9. So if this is your problem then you need to use "setserial". : :Hope this helps, :Matt : Thanks that did the trick. PPPD still dies though I still have a working connection when it does. I get an error message in /var/log/messages that says something like "timed out getting IPX configuration" then pppd dies. I am not using the IPX protocol to connect to my ISP and I am assuming that there is a "switch" or something along those lines that I can use to tell pppd not to bother with IPX. I am unsure what it is though. Jerome K. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] SAMBA problems
by chaos＠odn.de 12 Mar '98

12 Mar '98

HihO.. >If your nt-workstation (or server) has Service Pack 3 installed then =0D >nt encrypts the password in a way linux cannot understand. =0D >There's a workaround. I can't remember the exact registry entry but=0D >there's one where you can set if nt encrypts the passwords. =0D >=0D >I think the latest samba version can handle this encryption.=0D you can disable this option in the nt-registry: HKEY_LOCAL_MACHINE\system\CurrentControlSet\Services\rdr\parameters\ et here: EnablePlainTextPassword:REG_DWORD=3D1 o far... =00=00 -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] httpd problems
by pbleser＠prov-liege.be 12 Mar '98

12 Mar '98

None, but -obviously- httpd needs System-V IPC calls, which is an option in the kernel: take a look at "General setup": System V IPC and activate it... That's all !! -----Original Message----- From: K.Y.Lo <K.Y.Lo(a)soton.ac.uk> To: suse <suse-linux-e(a)suse.com> Date: Thursday, March 12, 1998 3:25 PM Subject: [S.u.S.E. Linux] httpd problems > >Hi > >I have the 2.0.33 version of kernel and suse 5.1 linux. I build the >Web server on the internet. I compiled the kernel updated with support >httpd and ethernet. It was restart the machine to boot then Linux loading. >It says :- > >httpd: Your kernel was built without CONFIG_SYSVIPC >httpd: please consult the Apache FAQ for details >shmget: Function not implemented >httpd: Could not call shmget > >What's the problem with httpd and kernel 2.0.33? > > > >Thank you > > >-- >Cheers > >K.Y.Lo >Email: kyl(a)soton.ac.uk >-- >To get out of this list, please send email to majordomo(a)suse.com with >this text in its body: unsubscribe suse-linux-e > -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] httpd problems
by peter＠datadok.no 12 Mar '98

12 Mar '98

>httpd: Your kernel was built without CONFIG_SYSVIPC ... >What's the problem with httpd and kernel 2.0.33? Your kernel was compiled without System V Interprocess Communication support, for some reason. reconfigure and recompile. that is, using make menuconfig, you choose "General setup", then enable "System V IPC". then do the rest of the little things you do to build and install a new kernel. - Peter -- Peter N. M. Hansteen peter(a)datadok.no <A HREF="http://www.datadok.no"><A HREF="http://www.datadok.no</A">http://www.datadok.no</A</A>> Datadokumentasjon A/S, Bredsgaarden 2, N-5003 Bergen, Norway Tel: +47 55 32 08 02 Fax: +47 55 32 14 95 -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] httpd problems
by helge.olsen＠mediasvar.se 12 Mar '98

12 Mar '98

At 14:10 1998-03-12 +0000, you wrote: > >Hi > >I have the 2.0.33 version of kernel and suse 5.1 linux. I build the >Web server on the internet. I compiled the kernel updated with support >httpd and ethernet. It was restart the machine to boot then Linux loading. >It says :- > >httpd: Your kernel was built without CONFIG_SYSVIPC ^^^^^^^^^^^^^^ You need to enable SYSV IPC in your kernel configuration. >httpd: please consult the Apache FAQ for details >shmget: Function not implemented >httpd: Could not call shmget > >What's the problem with httpd and kernel 2.0.33? > I run kernel 2.0.33 and apache. Runs fine. See above. /Helge Olsen +--------+--------------------------------+-----------------------------+ | |Email: helge.olsen(a)mediasvar.se | Private: helolle(a)algonet.se | | | sysadm(a)mediasvar.se | | | +--------------------------------+-----------------------------+ | |Snail: Media Svar AB | Private: Helge M. Olsen | | | Att: Helge Olsen | Snail Hindsbogatan 25C | | | Box 364 | S-532 32 Skara | | | S-532 24 Skara | Sweden | | | Sweden | | | +--------------------------------+-----------------------------+ | |Tel: +46-(0)511-28510 | Private: +46-(0)511-21565 | | |Fax: +46-(0)511-28500 | GSM: +46-(0)707-166166 | +--------+--------------------------------+-----------------------------+ -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] SAMBA problems
by mike＠dbsz.atnet.at 12 Mar '98

12 Mar '98

If your nt-workstation (or server) has Service Pack 3 installed then nt encrypts the password in a way linux cannot understand. There's a workaround. I can't remember the exact registry entry but there's one where you can set if nt encrypts the passwords. I think the latest samba version can handle this encryption. At 02:47 PM 3/11/98 -0800, you wrote: > >It still sounds like the Domain Name Lookup is failing..... Wait... > >I had a case, when setting up my linux box... If the person logged into the >Windows (mine was NT) network used a different user name... or didn't have a >user name.. or the passwords didn't match... that person couldn't even net >view my linux box. > >On 10-Mar-98 Patrick Kirk wrote: >>Its there when the machine boots Win95. I can see it when i boot under >>Linux but not access it. > >---------------------------------- ><A HREF="http://homepages.skylink.net/~gecko/index.html"><A HREF="http://homepages.skylink.net/~gecko/index.html</A">http://homepages.skylink.net/~gecko/index.html</A</A>> >-----BEGIN GEEK CODE BLOCK----- >Version: 3.1 >GCS d+(-) s:+ a29 C++$ UL++>++++ P+++$ L++>++++ E? W+++$ N+(-) o? K- w+++$(--) >O M-- V- PS-- PE++ Y++ PGP++ t+ 5 X R+ !tv b++++ > DI+++ D++ G++>G+++ e h+ r* y+ >------END GEEK CODE BLOCK------ ><A HREF="http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html"><A HREF="http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html</A">http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html</A</A>> >---------------------------------- >-- >To get out of this list, please send email to majordomo(a)suse.com with >this text in its body: unsubscribe suse-linux-e > > -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] httpd problems
by K.Y.Lo＠soton.ac.uk 12 Mar '98

12 Mar '98

Hi I have the 2.0.33 version of kernel and suse 5.1 linux. I build the Web server on the internet. I compiled the kernel updated with support httpd and ethernet. It was restart the machine to boot then Linux loading. It says :- httpd: Your kernel was built without CONFIG_SYSVIPC httpd: please consult the Apache FAQ for details shmget: Function not implemented httpd: Could not call shmget What's the problem with httpd and kernel 2.0.33? Thank you -- Cheers K.Y.Lo Email: kyl(a)soton.ac.uk -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Very new...
by tschaefe＠paging.mot.com 12 Mar '98

12 Mar '98

Frank Pawlak wrote: > I have another idea. With NT4.0 why not blow away Win95? It is just a > piece of crap OS that serves no purpose than to make your life > misearble. > ROTFL! However, I have found that Win95 and NT run a couple of "mission critical apps" for me. I can only run Jane's 688 Submarine simulator under 95, and it doesn't work under NT. NT Workstation - I found a great use for it as a Conference Room IRC chat server. It's much easier than setting up ircd on *nix. It works great with any IRC client (Zircon, Bitchx, ircii, mIRC, Pirch, kirc) and even includes a java client for web browser type chatting, stripped down but nevertheless quite functional. So the winblows environment is great for toys. When I want to do serious computing, let there be Linux. When the irc clients get better in Linux, (like Pirch) and when I can run a chat server without a lot of grief, then I won't need NT for anything. Now if we can just get Jane's to port to Linux ... -tks- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] SCSI CD problems (Second try)
by helge.olsen＠mediasvar.se 12 Mar '98

12 Mar '98

At 22:58 1998-03-10 -0600, you wrote: >At 04:03 AM 3/8/98 +0100, you wrote: >> >> >>Again, my hardware: >>Tekram DC-390T SCSI-2 PCI controller >>SCSI ID 0: Pioneer DR-U12X SCSI-2 Cdrom >>SCSI ID 1: IBM OEM Fast SCSI-2 hard drive >>SCSI ID 2: Seagate something SCSI-1 CCS hard drive (not sure what CCS >>means...) >> >>Thanks in advance for any thoughts/suggestions. >>Helge M. Olsen /SysAdm/ > >Helge, >Any particular reason why the SCSI CD is ID=0? Usually, I have seen CD set >to 5 or 6. Have you tried changing IDs and see if alleviates your problem? > The reason I set CD to 0 is because I once upon a time tried to make my CD bootable... I read somewhere that the Tekram controller would like the boot devices to be 0 or 1. Since I never got it to work, I guess I could try changing the ID... Anyway, why did I encounter this problem with post-2.0.27 kernels? When I ran that I never had SCSI problems... >regards, >Arun Khan > Thanks for the tip, man! /Helge Olsen +--------+--------------------------------+-----------------------------+ | |Email: helge.olsen(a)mediasvar.se | Private: helolle(a)algonet.se | | | sysadm(a)mediasvar.se | | | +--------------------------------+-----------------------------+ | |Snail: Media Svar AB | Private: Helge M. Olsen | | | Att: Helge Olsen | Snail Hindsbogatan 25C | | | Box 364 | S-532 32 Skara | | | S-532 24 Skara | Sweden | | | Sweden | | | +--------------------------------+-----------------------------+ | |Tel: +46-(0)511-28510 | Private: +46-(0)511-21565 | | |Fax: +46-(0)511-28500 | GSM: +46-(0)707-166166 | +--------+--------------------------------+-----------------------------+ -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: Re[2]: [S.u.S.E. Linux] Very new...
by pbleser＠prov-liege.be 12 Mar '98

12 Mar '98

Yep! And the point is: NT _crashes_ ('blue phenomena,)... 95 _does_ crash even more often, but... like... softly ? It slows down, slows down, slows down... all your windows are white and unpainted... Maybe you can save one or two apps (CrashGuard, CCTask, ...) !! OK, they're not worth the NT TaskManager, but when NT crashes, you don't have the time to run it !! ;-) just get Linux... ALT+Fx and kill -9 ... -----Original Message----- From: Darren <gecko(a)freecar.com> To: suse-linux-e(a)suse.com <suse-linux-e(a)suse.com> Date: Thursday, March 12, 1998 7:44 AM Subject: RE: Re[2]: [S.u.S.E. Linux] Very new... > >There *are* a few popular apps that won't run under NT... mostly games.. > >On 12-Mar-98 Frank Pawlak wrote: >>I have run the almost identical setup that you are attempting, and >>finally realized that NT would do everything that Win95 would do for me. >> So off it went and my computing life has never been better. The more I >>use FreeBSD and Linux the less I use NT, and don't miss old crash and >>burn Windlows95 at all. >> > >---------------------------------- ><A HREF="http://homepages.skylink.net/~gecko/index.html"><A HREF="http://homepages.skylink.net/~gecko/index.html</A">http://homepages.skylink.net/~gecko/index.html</A</A>> >-----BEGIN GEEK CODE BLOCK----- >Version: 3.1 >GCS d+(-) s:+ a29 C++$ UL++>++++ P+++$ L++>++++ E? W+++$ N+(-) o? K- >w+++$(--) O M-- V- PS-- PE++ Y++ PGP++ t+ 5 X R+ !tv b++++ DI+++ D++ >G++>G+++ e h+ r* y+ >------END GEEK CODE BLOCK------ ><A HREF="http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html"><A HREF="http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html</A">http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html</A</A>> >---------------------------------- >-- >To get out of this list, please send email to majordomo(a)suse.com with >this text in its body: unsubscribe suse-linux-e > -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

RE: Re[2]: [S.u.S.E. Linux] Very new...
by gecko＠freecar.com 12 Mar '98

12 Mar '98

There *are* a few popular apps that won't run under NT... mostly games.. On 12-Mar-98 Frank Pawlak wrote: >I have run the almost identical setup that you are attempting, and >finally realized that NT would do everything that Win95 would do for me. > So off it went and my computing life has never been better. The more I >use FreeBSD and Linux the less I use NT, and don't miss old crash and >burn Windlows95 at all. > ---------------------------------- <A HREF="http://homepages.skylink.net/~gecko/index.html"><A HREF="http://homepages.skylink.net/~gecko/index.html</A">http://homepages.skylink.net/~gecko/index.html</A</A>> -----BEGIN GEEK CODE BLOCK----- Version: 3.1 GCS d+(-) s:+ a29 C++$ UL++>++++ P+++$ L++>++++ E? W+++$ N+(-) o? K- w+++$(--) O M-- V- PS-- PE++ Y++ PGP++ t+ 5 X R+ !tv b++++ DI+++ D++ G++>G+++ e h+ r* y+ ------END GEEK CODE BLOCK------ <A HREF="http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html"><A HREF="http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html</A">http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html</A</A>> ---------------------------------- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Very new...
by satan＠nfinity.com 12 Mar '98

12 Mar '98

> I have another idea. With NT4.0 why not blow away Win95? It is just a > piece of crap OS that serves no purpose than to make your life > misearble. > Until NT5 and directX 6, Windows95/98 are the only platform(s) for those of us who like games. NT4 just isn't game/hardware friendly. Hopefully other developers will follow id software's lead and offer linux bins for their games in the future, but until then I'm keeping a partition for windows. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] FTP madness!
by jonathan＠aracnet.net 12 Mar '98

12 Mar '98

On 11-Mar-98 Joshua Rodman wrote: > > On Tue, 10 Mar 1998 dedwards(a)technologist.com wrote: > >> > [<A HREF="http://www.aracnet.net/~jonathan/linux.html"><A HREF="http://www.aracnet.net/~jonathan/linux.html</A">http://www.aracnet.net/~jonathan/linux.html</A</A>> if you're interested] I use >> > command-line FTP (like a real man) and it would send all bytes and freeze >> > at the end. The result was a 0 byte file! I had to mail the file to the >> > >> I've had a similar problem when trying to ftp to an IBM Mainframe Host. > > Stupid suggestion. Tried ncftp, netscape, or any other implementation > of the ftp protocol? ncftp, I installed it while I was still online! Then I downloaded xmftp and started to get suspicious when that did the same thing. I rebooted and chickened out (Win95) and it worked. Not good, not good at all. --- jonathan(a)aracnet.net The modern child will answer you back before you've said anything. -- Laurence J. Peter -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Very new...
by zentara＠mindspring.com 12 Mar '98

12 Mar '98

Richard Sobey wrote: > > Anyway, I have the following situation. I have 4 partitions. On C: I > have Windows 95. On D: I have Windows NT4, on E: I have Quake 2, and > my last partition, F:, is reserved for Linux. Erm... > > C: 2Gb > D: 1.5Gb > E: 500Mb > F: 1Gb > > > > And my last question - will there be any problem with my HD. It's a > Maxtor Diamond Max 5Gb (just bought it a few days ago) and I'm having > to use the EZ-BIOS that comes with it, since my BIOS doesn't support > disks > 2Gb. Do you think it'll be okay? > I went thru the same bs. First of all , you should get rid of EZ-BIOS and then proceed from there. EZ-BIOS must go!!! Linux won't work at all with ez-bios. That 5 gig drive is going to be a problem for win95 running the fat file system. You will have to work around win95 as a stone around your neck. :-) I would guess, that you could make a 500 meg primary for c:, and put win95 in there. Make a second primary of 2 gig for NT, a third primary of 500meg for quake. That would leave you with 2 gig which you could make as a extended dos partition. Divide the extended dos into a bunch of smaller logical drives, say 1 gig, 950 meg, and 50 meg. Format the 1 gig as fat so it will show up under windows. Then put linux into the 950meg and make the 50meg your linux swap. When you install lilo, tell it you want it in the mbr of the drive, if you want lilo to control booting. With all those different os'es, you should probably look into System Commander, although lilo can always be made to work. I must have rebuilt my drives 100 times when I started messing around with multiple operating systems. NT and Linux don't need ez-bios to see the whole 5 gig. Good luck, and you will learn to curse the fat filesystem. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re[2]: [S.u.S.E. Linux] Very new...
by fpawlak＠execpc.com 12 Mar '98

12 Mar '98

zentara <zentara(a)mindspring.com> wrote: > > Richard Sobey wrote: > > > > Anyway, I have the following situation. I have 4 partitions. On C: I > > have Windows 95. On D: I have Windows NT4, on E: I have Quake 2, and > > my last partition, F:, is reserved for Linux. Erm... > > > > C: 2Gb > > D: 1.5Gb > > E: 500Mb > > F: 1Gb > > > > > > > And my last question - will there be any problem with my HD. It's a > > Maxtor Diamond Max 5Gb (just bought it a few days ago) and I'm > having > > to use the EZ-BIOS that comes with it, since my BIOS doesn't support > > disks > 2Gb. Do you think it'll be okay? > > > I went thru the same bs. First of all , you should get rid of > EZ-BIOS and then proceed from there. EZ-BIOS must go!!! > Linux won't work at all with ez-bios. > > That 5 gig drive is going to be a problem for > win95 running the fat file system. You will have > to work around win95 as a stone around your neck. :-) I have another idea. With NT4.0 why not blow away Win95? It is just a piece of crap OS that serves no purpose than to make your life misearble. I have run the almost identical setup that you are attempting, and finally realized that NT would do everything that Win95 would do for me. So off it went and my computing life has never been better. The more I use FreeBSD and Linux the less I use NT, and don't miss old crash and burn Windlows95 at all. System Commander is a solid suggestion for booting multi-os computers. Althought NT's boot loader or Lilo can be made to work. But if System Commander is within the budget by all means get it. It will save some pain. Just some thoughts. Frank > I would guess, that you could make a 500 meg primary > for c:, and put win95 in there. Make a second primary of 2 gig > for NT, a third primary of 500meg for quake. That would leave > you with 2 gig which you could make as a extended dos partition. > Divide the extended dos into a bunch of smaller logical drives, > say 1 gig, 950 meg, and 50 meg. Format the 1 gig as fat so it will > show up under windows. Then put linux into the 950meg and make the > 50meg your linux swap. > When you install lilo, tell it you want it in the mbr of the drive, > if you want lilo to control booting. > > With all those different os'es, you should probably look into > System Commander, although lilo can always be made to work. > > I must have rebuilt my drives 100 times when I started messing around > with multiple operating systems. > > NT and Linux don't need ez-bios to see the whole 5 gig. > > Good luck, and you will learn to curse the fat filesystem. > > -- > To get out of this list, please send email to majordomo(a)suse.com with > this text in its body: unsubscribe suse-linux-e -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] PPPD Dies
by liberty＠aznet.net 12 Mar '98

12 Mar '98

I had the same prob. Does your login take a long time? If it does then your IRQ for your modem is not set correctly. I was able to dial out with my modem when it was set to IRQ 3, but in windows it is 9. So if this is your problem then you need to use "setserial". Hope this helps, Matt Jerome Krough wrote: > I am using kppp. PPPD dies while a connection is being made with my ISP. This is the output of /var/log/messages > > Mar 11 01:01:37 cojones kernel: registered device ppp0 > Mar 11 01:01:37 cojones pppd[167]: pppd 2.2.0 started by jerry, uid 501 > Mar 11 01:01:37 cojones pppd[167]: Using interface ppp0 > Mar 11 01:01:37 cojones pppd[167]: Connect: ppp0 <--> /dev/cua2 > Mar 11 01:02:07 cojones pppd[167]: LCP: timeout sending Config-Requests > Mar 11 01:02:07 cojones pppd[167]: Connection terminated. > Mar 11 01:02:07 cojones pppd[167]: Receive serial link is not 8-bit clean: > Mar 11 01:02:07 cojones pppd[167]: Problem: all had bit 7 set to 0 > Mar 11 01:02:17 cojones pppd[167]: Hangup (SIGHUP) > Mar 11 01:02:17 cojones pppd[167]: ioctl(TIOCNXCL): I/O error > Mar 11 01:02:17 cojones pppd[167]: Exit. > > /ppp/options is empty, suid is set and as far as I know the proper permissions are set. I have followed and set up kppp according to the kppp help file. I believe the problem has to do with "serial link is not 8-bit clean" and I have no idea what the message is referring to. Any help would be appreciated. > > Jerome K. > -- > To get out of this list, please send email to majordomo(a)suse.com with > this text in its body: unsubscribe suse-linux-e -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] kernel error
by jboonen＠worldonline.nl 11 Mar '98

11 Mar '98

Hi all, I do have the following problem my system does freeze a lot of times. I did get the follow Error: UNABLE TO HANDLE KERNEL NULL POINTER DEREFERANCE AT VIRTUAL ADDRESS C00004 (i'm not sure about the address the C000 is for sure but the rest i'm not completely sure about. Can someone please help me, i don't understand this problem. Thank you very much. Regards, Joop Boonen. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] SAMBA problems
by gecko＠freecar.com 11 Mar '98

11 Mar '98

It still sounds like the Domain Name Lookup is failing..... Wait... I had a case, when setting up my linux box... If the person logged into the Windows (mine was NT) network used a different user name... or didn't have a user name.. or the passwords didn't match... that person couldn't even net view my linux box. On 10-Mar-98 Patrick Kirk wrote: >Its there when the machine boots Win95. I can see it when i boot under >Linux but not access it. ---------------------------------- <A HREF="http://homepages.skylink.net/~gecko/index.html"><A HREF="http://homepages.skylink.net/~gecko/index.html</A">http://homepages.skylink.net/~gecko/index.html</A</A>> -----BEGIN GEEK CODE BLOCK----- Version: 3.1 GCS d+(-) s:+ a29 C++$ UL++>++++ P+++$ L++>++++ E? W+++$ N+(-) o? K- w+++$(--) O M-- V- PS-- PE++ Y++ PGP++ t+ 5 X R+ !tv b++++ DI+++ D++ G++>G+++ e h+ r* y+ ------END GEEK CODE BLOCK------ <A HREF="http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html"><A HREF="http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html</A">http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html</A</A>> ---------------------------------- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] Very new...
by news-reply＠the-annexe.demon.co.uk 11 Mar '98

11 Mar '98

Hi all, First, please forgive me for asking a very simple (to an experienced user) question. I think there is a list for newbies somewhere though... anyone know? Anyway, I have the following situation. I have 4 partitions. On C: I have Windows 95. On D: I have Windows NT4, on E: I have Quake 2, and my last partition, F:, is reserved for Linux. Erm... C: 2Gb D: 1.5Gb E: 500Mb F: 1Gb I want to install Linux onto F: but I'm fed up with having to repartition my disks. I've done it about 5 times this week! Even though I suppose it's no hassle, it takes about 2 hours getting my system back to speed in terms of reinstalling NT et al. Is the only way to get Suse on my system to re-partition everything and start from scratch? If so [ :-( ] can somebody tell me the best way of splitting up the 1Gb - I really want it to do development on for college (I need a decent C++ compiler). I want the X-Windows environment too, but the 5.0 distribution isn't compatible with my Mystique 220, right? I downloaded what appears to me to be updated drivers (?) for the card, but WinZIP keeps asking me for the filename contained within the archive (I think they're RPM or something). Obviously I can't use WinZIP when I'm installing the drivers - but what is in the archive, so to speak? And my last question - will there be any problem with my HD. It's a Maxtor Diamond Max 5Gb (just bought it a few days ago) and I'm having to use the EZ-BIOS that comes with it, since my BIOS doesn't support disks > 2Gb. Do you think it'll be okay? Anyway - sorry again to be so clueless, but I'm entirely from an NT/95 background. Thanks for any help you can offer. Richard Sobey. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] SAMBA problems
by pkirk＠enterprise-hr.com 11 Mar '98

11 Mar '98

Its there when the machine boots Win95. I can see it when i boot under Linux but not access it. -----Original Message----- From: gecko(a)freecar.com <gecko(a)freecar.com> To: suse-linux-e(a)suse.com <suse-linux-e(a)suse.com> Date: Wednesday, 11 March 1998 20:45 Subject: Re: [S.u.S.E. Linux] SAMBA problems > > >>> I have just installed Linux for the first time. The network is a tcp/ip >>> Win95 setup. I can ping all others machines on the network by name except >>> my Linux box. I can ping the linux box by ip address. I can also telnet in >>> from the Win95 boxes by ip address. The linux box does not appear in the >>> win95 network neighborhood. Obviously I can't use SAMBA shares until it >>> does. >>> >Has anyone checked the hosts file ("\WINDOWS\HOSTS") for the proper entry? > >---------------------------------- ><A HREF="http://homepages.skylink.net/~gecko/index.html"><A HREF="http://homepages.skylink.net/~gecko/index.html</A">http://homepages.skylink.net/~gecko/index.html</A</A>> >-----BEGIN GEEK CODE BLOCK----- >Version: 3.1 >GCS d+(-) s:+ a29 C++$ UL++>++++ P+++$ L++>++++ E? W+++$ N+(-) o? K- w+++$(--) >O M-- V- PS-- PE++ Y++ PGP++ t+ 5 X R+ !tv b++++ > DI+++ D++ G++>G+++ e h+ r* y+ >------END GEEK CODE BLOCK------ ><A HREF="http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html"><A HREF="http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html</A">http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html</A</A>> >---------------------------------- >-- >To get out of this list, please send email to majordomo(a)suse.com with >this text in its body: unsubscribe suse-linux-e -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] RV: ATI 3D RAGE PRO AGP.HELP!
by bb＠suse.com 11 Mar '98

11 Mar '98

Fjoe wrote: > > I have a DELL OPTIPLEX GXa 300 Mhz. and when he buys it the graphic card it > came with the ATI 3D RAGE PRO AGP. > > Install RedHat Linux 5.0 (Hurricane) and it didn't support this graphic > card. Change, momentarily, whit a MATROX MILLENIUM II whit 4Mb that worked > perfectly with XFree86. > > For the Hurricane List I found out that I could get off the net from > <A HREF="http://www.suse.de"><A HREF="http://www.suse.de</A">http://www.suse.de</A</A>> the X Server that gave support to my card. > > I download the XSuSe_Mach64 that supports the graphic card ATI 3D RAGE PRO > AGP and I have followed the instructions for their installation. > > As root: > cd / > tar xfvzp [PATH_TO_TGZ] / [X-SERVER].tgz > tar xfvzp [PATH_TO_TGZ] /xsuseconfig.tgz > mkdir -p /var/X11R6/xkb/compiled. > > Well, when I run xf86config encounter my graphic card in the list with the > n.43 ATI XPERT@PLAY PCI and AGP, 3D RAGE PRO., I install everything (I > believe) correctly and when run startx can see XWindows perfectly but with a > resolution of 320x200 with the one that I cannot work. > When shutdown XWindows whit CTRL+ALT+BACKSPACE can see: > > (- -) SVGA: PCI: ATI Unknown Chipset (0x4744) rev 92m Neniry @ ^^^^ You are using the wrong server, make sure X in /var/lib/X11R6/bin/X is a link to the Mach64 server. Ciao, BB -- Bodo Bauer S.u.S.E., LLC fon +1-510-835 7873 bb(a)suse.de 458 Santa Clara Avenue fax +1-510-835 7875 <A HREF="http://www.suse.com"><A HREF="http://www.suse.com</A">http://www.suse.com</A</A>> Oakland CA, 94610 USA -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Problems... Please, help.
by bb＠suse.com 11 Mar '98

11 Mar '98

Luis A. Costabile wrote: > > On Tue, 10 Mar 1998, Simone Castellaneta wrote: > > > ------------- > > > > I' ve found that I don' t have "nslookup" command (bash: command not found) > > and it' s true!! Which packet does it belong to? > > > > ------------- > > I think it's in the bind package, just do a search from within yast, with > the word nslookup. I think it's pretty silly to not make nslookup a > default for this package, maybe the suse boys are listening right now :) > You are right, nslookup is in package 'bind, series n'. :-) Ciao, BB -- Bodo Bauer S.u.S.E., LLC fon +1-510-835 7873 bb(a)suse.de 458 Santa Clara Avenue fax +1-510-835 7875 <A HREF="http://www.suse.com"><A HREF="http://www.suse.com</A">http://www.suse.com</A</A>> Oakland CA, 94610 USA -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] RV: ATI 3D RAGE PRO AGP.HELP!
by fmc＠redestb.es 11 Mar '98

11 Mar '98

I have a DELL OPTIPLEX GXa 300 Mhz. and when he buys it the graphic card it came with the ATI 3D RAGE PRO AGP. Install RedHat Linux 5.0 (Hurricane) and it didn't support this graphic card. Change, momentarily, whit a MATROX MILLENIUM II whit 4Mb that worked perfectly with XFree86. For the Hurricane List I found out that I could get off the net from <A HREF="http://www.suse.de"><A HREF="http://www.suse.de</A">http://www.suse.de</A</A>> the X Server that gave support to my card. I download the XSuSe_Mach64 that supports the graphic card ATI 3D RAGE PRO AGP and I have followed the instructions for their installation. As root: cd / tar xfvzp [PATH_TO_TGZ] / [X-SERVER].tgz tar xfvzp [PATH_TO_TGZ] /xsuseconfig.tgz mkdir -p /var/X11R6/xkb/compiled. Well, when I run xf86config encounter my graphic card in the list with the n.43 ATI XPERT@PLAY PCI and AGP, 3D RAGE PRO., I install everything (I believe) correctly and when run startx can see XWindows perfectly but with a resolution of 320x200 with the one that I cannot work. When shutdown XWindows whit CTRL+ALT+BACKSPACE can see: (- -) SVGA: PCI: ATI Unknown Chipset (0x4744) rev 92m Neniry @ 0xFd000000, mmio@0xfcfff000, I/0 @0xec00 (* *) chipset: generic (- -) videoram: 64K (- -) clocks: 28,18 (* *) SVGA: Using 8bpp, Depth8, Color weight:666 (- -) SVGA: Usingbuiltin driver nodes (- -) SVGA: Builtin Mode: 320x200 (- -) SVGA: Virtual resolution set to 320x200 (- -) SVGA: SpeedUp code selection modified vecause virtual X !=1024 (- -) SVGA: Using XAA (XFree86 Aceleration Architecture) (- -) SVGA: XAA: No accelaration primitives defined. Somebody knows like I can solve this problem. That I am making bad? Thanks in advance. fmc(a)redestb.es -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] SAMBA problems
by gecko＠freecar.com 11 Mar '98

11 Mar '98

>> I have just installed Linux for the first time. The network is a tcp/ip >> Win95 setup. I can ping all others machines on the network by name except >> my Linux box. I can ping the linux box by ip address. I can also telnet in >> from the Win95 boxes by ip address. The linux box does not appear in the >> win95 network neighborhood. Obviously I can't use SAMBA shares until it >> does. >> Has anyone checked the hosts file ("\WINDOWS\HOSTS") for the proper entry? ---------------------------------- <A HREF="http://homepages.skylink.net/~gecko/index.html"><A HREF="http://homepages.skylink.net/~gecko/index.html</A">http://homepages.skylink.net/~gecko/index.html</A</A>> -----BEGIN GEEK CODE BLOCK----- Version: 3.1 GCS d+(-) s:+ a29 C++$ UL++>++++ P+++$ L++>++++ E? W+++$ N+(-) o? K- w+++$(--) O M-- V- PS-- PE++ Y++ PGP++ t+ 5 X R+ !tv b++++ DI+++ D++ G++>G+++ e h+ r* y+ ------END GEEK CODE BLOCK------ <A HREF="http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html"><A HREF="http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html</A">http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html</A</A>> ---------------------------------- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] frustrated
by pkirk＠enterprise-hr.com 11 Mar '98

11 Mar '98

Hi Pascal, I attach smb.conf, rc.config, the output of testparm, nmblookup -d2 and ifconfig. I can see the machine in Network Neighbourhood. What I cannot do is access it. If I right click and try to open, explore, whatever, I get an error message that the computer name is unavailable, may be splelt wrong, try again. Note: the [global] public = yes yet I cannot access this from other PCs. Perhaps you were right about routing. Have a look at these and let me know what you think. Best regards, Patrick Kirk Enterprise Human Resources Tel: 0044 118 939 1122 Fax: 0044 118 939 3388 Executive Opportunities at www.enterprise-hr.com E-mail pkirk(a)enterprise-hr.com begin 600 ifconfig.txt M;&\@(" @(" @($QI;FL@96YC87 Z3&]C86P@3&]O<&)A8VL@( T*(" @(" @ M(" @(&EN970@861D<CHQ,C<N,"XP+C$(a)($)C87-T.C$R-RXR-34N,C4U+C(U M-2 @36%S:SHR-34N,"XP+C -"B @(" @(" @("!54"!"4D]!1$-!4U0@3$]/ M4$)!0TL(a)4E5.3DE.1R @3515.C,U.#0@($UE=')I8SHQ#0H@(" @(" @(" @ M4E@@<&%C:V5T<SHR-2!E<G)O<G,Z,"!D<F]P<&5D.C @;W9E<G)U;G,Z, T* M(" @(" @(" @(%18('!A8VME=',Z,C4(a)97)R;W)S.C @9')O<'!E9#HP(&]V M97)R=6YS.C -"@T*9'5M;7DP(" @($QI;FL@96YC87 Z,3!-8G!S($5T:&5R M;F5T("!(5V09'(@,# Z,# Z,# Z,# Z,# Z,# -"B @(" @(" @("!I;F5T M(&09'(Z,3 R+C4T+C$P,"XQ-C8(a)($)C87-T.C$P,BXR-34N,C4U+C(U-2 @ M36%S:SHR-34N,"XP+C -"B @(" @(" @("!54"!"4D]!1$-!4U0(a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` end begin 600 nmblookup -d2.txt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` end begin 600 RCCONFIG.txt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a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a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a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a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a)*&YO+VQI;FLO8VQE86XI#0I(3U=?5$]?2$%.1$Q%7T-/ M34U 0-)04Q?3$E"4SUL:6YK#0H-"@T*#0HC#0HC('!O<W-I8FQY(&$@<V-R M:7!T(&EN("]S8FEN+VEN:70N9"!O<B!C<F]N+F1A:6QY('-E;F1S(&UA:6QS M+B -"B,@4V\@<&QE87-E(&QE="!-35]254Y!4U)/3U0@8F4@<V5T('1O(")T M<G5E(BX-"B,-"DU-7U)53D 0]/5#UT<G5E#0IE>'!O<G0(a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a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` end begin 600 SMBCONF.txt M6V=L;V)A;%T-"B @('=O<FMG<F]U<" ](&5N=&5R<')I<V4-"B @(')E;6]T M92!A;FYO=6YC92 ](#$P,BXU-"XQ,# N,C4U+V5N=&5R<')I<V4-"B @(&%N M;F]U;F-E(&%S(#T(a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` end begin 600 TESTPARM.txt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a)9&ER96-T;W)Y.B O#0H)9&5F875L="!S97)V M:6-E.B!P=6)L:6,-"@EM97-S86=E(&-O;6UA;F0Z( T*"61F<F5E(&-O;6UA M;F0Z( T*"7!A<W-W9"!P<F]G<F%M.B O8FEN+W!A<W-W9 T*"7!A<W-W9"!C M:&%T.B J;VQD*G!A<W-W;W)D*B E;UQN("IN97<J<&%S<W=O<F0J("5N7&X@ M*FYE=RIP87-S=V]R9"H@)6Y<;B J8VAA;F=E9"H-"@EV86QI9"!C:&%R<SH@ M#0H)=V]R:V=R;W5P.B!0.000000E+0010.000000E+00!225-%#0H)9&]M86EN(&-O;G1R;VQL97(Z M( T*"75S97)N86UE(&UA<#H@#0H)8VAA<F%C=&5R('-E=#H@#0H);&]G;VX@ M<V-R:7!T.B -"@EL;V=O;B!P871H.B -"@ER96UO=&4@86YN;W5N8V4Z(#$P M,BXU-"XQ,# N,C4U+V5N=&5R<')I<V4-"@ES;V-K970@861D<F5S<SH@,"XP M+C N, T*"6AO;65D:7(@;6%P.B -"@EA;FYO=6YC92!V97)S:6]N.B T+C(- M"@EM87@@;&]G('-I>F4Z(#4P,# -"@EM86YG;&5D('-T86-K.B U, T*"6UA M>"!M=7@Z(#4P#0H);60('AM:70Z(#8U-3,U#0H);60('!A8VME=#H@-C4U M,S4-"@EP87-S=V]R9"!L979E;#H@, T*"6ME97!A;&EV93H@,S -"@ED960 M=&EM93H@, T*"71I;64@;V9F<V5T.B P#0H)<F5A9"!S:7IE.B Q-C,X- T* M"7-H87)E9"!M96T@<VEZ93H@,3 R-# P#0H)<VAA<F5D(&9I;&4@96YT<FEE M<SH@,3$S#0H)8VQI96YT(&-O9&4@<&093H@.#4P#0H);W,@;&5V96PZ(# - M"@EM87@@='1L.B Q-#0P, T*"61N<R!P<F]X>3H@665S#0H)=VEN<R!S=7!P M;W)T.B!.;PT*"7=I;G,@<')O>'DZ($YO#0H)=VEN<R!S97)V97(Z( T*"7!R M969E<G)E9"!M87-T97(Z($YO#0H);&]C86P(a);6%S=&5R.B!997,-"@ED;VUA M:6X@;6%S=&5R.B!.;PT*"61O;6%I;B!L;V=O;G,Z($YO#0H)8G)O=W-E(&QI M<W0Z(0.000000E+00E<PT*"75N:7@@<F5A;&YA;64Z($YO#0H)3DE3(&AO;65D:7(Z($YO M#0H)=&EM92!S97)V97(Z($YO#0H-"D1E9F0;'0@<V5R=FEC92!P87)A;65T M97)S.@T*"6-O;6UE;G0Z( T*"6-O<'DZ( T*"6EN8VQU9&4Z( T*"65X96,Z M( T*"7!O<W1E>&5C.B -"@ER;V]T('!R965X96,Z( T*"7)O;W0@<&]S=&5X M96,Z( T*"6%L=&5R;F%T92!P97)M:7-S:6]N<SH@3F\-"@ER979A;&ED871E M.B!.;PT*"61E9F0;'0@8V%S93H@, T*"6-A<V4@<V5N<VET:79E.B!.;PT* M"7!R97-E<G9E(&-A<V4Z(0.000000E+00E<PT*"7-H;W)T('!R97-E<G9E(&-A<V4Z($YO M#0H);6%N9VQE(&-A<V4Z($YO#0H);6%N9VQI;F<@8VAA<CH@?@T*"6)R;W=S M96%B;&4Z(0.000000E+00E<PT*"6%V86EL86)L93H@665S#0H)<&%T:#H@#0H)=7-E<FYA M;64Z( T*"6=U97-T(&%C8V]U;G0Z('-M8F=U97-T#0H):6YV86QI9"!U<V5R M<SH@#0H)=F%L:60@=7-E<G,Z( T*"60;6EN('5S97)S.B -"@ER960(&QI M<W0Z( T*"7=R:71E(&QI<W0Z( T*"79O;'5M93H@#0H)9F]R8V4@=7-E<CH@ M#0H)9F]R8V4@9W)O=7 Z( T*"7)E860@;VYL>3H@665S#0H);60(&-O;FYE M8W1I;VYS.B P#0H);6EN('!R:6YT('-P86-E.B P#0H)8W)E871E(&UA<VLZ M(# W-#0-"@EF;W)C92!C<F5A=&4@;6]D93H@,# -"@ED:7)E8W1O<GD@;6%S M:SH@,#<U-0T*"69O<F-E(&1I<F5C=&]R>2!M;V1E.B P, T*"7-E="!D:7)E M8W1O<GDZ($YO#0H)<W1A='5S.B!997,-"@EH:61E(&1O="!F:6QE<SH@665S M#0H)=F5T;R!F:6QE<SH@#0H):&ED92!F:6QE<SH@#0H)9W5E<W0@;VYL>3H@ M3F\-"@EG=65S="!O:SH@665S#0H)<')I;G0@;VLZ($YO#0H)<&]S='-C<FEP M=#H@3F\-"@EM87 @<WES=&5M.B!.;PT*"6UA<"!H:61D96XZ($YO#0H);6%P M(&%R8VAI=F4Z(0.000000E+00E<PT*"6QO8VMI;F<Z(0.000000E+00E<PT*"7-T<FEC="!L;V-K:6YG M.B!.;PT*"7-H87)E(&UO9&5S.B!997,-"@EO;FQY('5S97(Z($YO#0H)=VED M92!L:6YK<SH@665S#0H)9F]L;&]W('-Y;6QI;FMS.B!997,-"@ES>6YC(&%L M=V%Y<SH@3F\-"@EM86YG;&5D(&YA;65S.B!997,-"@EF86ME(&]P;&]C:W,Z M($YO#0H)<')I;G0@8V]M;6%N9#H@;'!R("UR("U0)7 @)7,-"@EL<'$@8V]M M;6%N9#H@;'!Q("U0)7 -"@EL<')M(&-O;6UA;F0Z(&QP<FT@+5 E<" E:@T* M"6QP<&0<V4@8V]M;6%N9#H@#0H);'!R97-U;64@8V]M;6%N9#H@#0H)<')I M;G1E<CH@#0H)<')I;G1E<B!D<FEV97(Z($Y53$P-"@EH;W-T<R!A;&QO=SH@ M,3 R+C4T+@T*"6AO<W1S(&1E;GDZ( T*"61O;G0@9&5S8V5N9#H@#0H);60 M:6,@<V-R:7!T.B -"@EM86=I8R!O=71P=70Z( T*"6UA;F=L960(a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` end -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] svgalib & nVidia
by pbleser＠prov-liege.be 11 Mar '98

11 Mar '98

Errr... I said _SVGAlib_, not X... -----Original Message----- From: Mario Oschwald <mario_oschwald(a)grosch-link.de> To: suse-linux-e(a)suse.com <suse-linux-e(a)suse.com> Date: Wednesday, March 11, 1998 1:26 PM Subject: Re: [S.u.S.E. Linux] svgalib & nVidia > >Pascal Bleser wrote: > >> I've got a Diamond Viper 330 (nVidia 128 chipset)... >> now, how the f*** do get SVGAlib to work with it ?? >> Just copy the modeclocks from the XF86Config ? >> >> thanx, people (sorry if it's stupid question) >> > >Use the nVidia X-server from SuSE > >Mario Oschwald > > >-- >To get out of this list, please send email to majordomo(a)suse.com with >this text in its body: unsubscribe suse-linux-e > -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] svgalib & nVidia
by mario_oschwald＠grosch-link.de 11 Mar '98

11 Mar '98

Pascal Bleser wrote: > I've got a Diamond Viper 330 (nVidia 128 chipset)... > now, how the f*** do get SVGAlib to work with it ?? > Just copy the modeclocks from the XF86Config ? > > thanx, people (sorry if it's stupid question) > Use the nVidia X-server from SuSE Mario Oschwald -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] SAMBA problems
by mario_oschwald＠grosch-link.de 11 Mar '98

11 Mar '98

Patrick Kirk wrote: > I have just installed Linux for the first time. The network is a tcp/ip > Win95 setup. I can ping all others machines on the network by name except > my Linux box. I can ping the linux box by ip address. I can also telnet in > from the Win95 boxes by ip address. The linux box does not appear in the > win95 network neighborhood. Obviously I can't use SAMBA shares until it > does. > > I don't know about Win95 (and don't really want to know) but on our NT/Linux/AIX/HP-UX Netwe needed to install a WINS Server to share the NetBIOS Names, remember that the NetBIOS Names used by NT and 95 are totally independend from DNS Names And you CAN use samba even if you haven't worked out the naming, the Linux Box may not be found automatically by its name but you can search for its IP address and get the shares this way, I think, but then again who knows what Win95 does. I'd recommend anyway to FORMAT C: and please all the machines with LINUX CU Mario Oschwald -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Suse 5.1 awesome
by mario_oschwald＠grosch-link.de 11 Mar '98

11 Mar '98

K.Y.Lo wrote: > > > I am using SuSe Linux now. German Suse is the best tools, i have ever > seen. > I agree, I have seen Red Hat and Debian and installed SuSE in different NetsYaST is very good and you know the guys are working on it. > How to abjust X-windows screen ? it looks out of screen. > > I have a 17" monitor scrreen (digital monitor) > Check /usr/X11R6/lib/X11/doc/README.Config for good instructionsthen use a programm called xvditune or something (I forgot the name, sorry) to fine tune your screen. Or get a monitor that remembers different settings and adjust directly on the hardware > Where do you know SuSe Linux 5.1 CDs in the Untied Kingdom for retail > computer shop? if you sell packages to England. > > Let me knows I would buy a copy of Linux 5.1 packages. > £ Wait for 5.2 (Ready after the CeBit) ask SuSE directly where to get itand they'll tell you > Hope this helps... Mario -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] svgalib & nVidia
by pbleser＠prov-liege.be 11 Mar '98

11 Mar '98

I've got a Diamond Viper 330 (nVidia 128 chipset)... now, how the f*** do get SVGAlib to work with it ?? Just copy the modeclocks from the XF86Config ? thanx, people (sorry if it's stupid question) -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] AGP XPERT@WORK
by hettar＠teleport.com 11 Mar '98

11 Mar '98

--------------230F4AB332AAEEF631124926 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit >> Steven Udell wrote: > > > > > I am wondering if I can get this AGP XPERT@WORK card going > > > So it goes on to ask me which server: I pick Mach64 server > > Then it asks me about RAMDAC and Clock settings(somethign) here > > is what I don't know what to put.. anyone help me on this exactly? > > > > Everything else I can set up except this card ;) help please. Had it fixed about an hour after I posted this message 3 weeks ago <G> Your right, just skip the ramdac and clock settings, and with the upgraded X server from suse( I thought I had the most recent version, but I did not) so with the newest version my card was listed and then everything was easy. _________________________________old ^ _____new (down) Works fine now except one thing err or two things... I get some little white dots verticly up and down X in 600x600 mode 32bit (with virtual 1200x1270 or somethen) but in any other I don't get them. (bugs the heck out of me). I gona put 4 more megs of ram in see if that helps(on AGP card) Ill post on this message tomarrow see if that does the trick *and the second problem, which as far as I know does not hinder *anything, when I shut down X I get a message *mach64ProgramClkMach64CT: warning : Q < 10.66666667 *strange (clock somethen or other is about all I can make of this) *anyone know??? -- Steven Udell Wayfarers hettar(a)teleport.com for truth love sudell(a)teleport.com and courage <A HREF="http://www.teleport.com/~hettar"><A HREF="http://www.teleport.com/~hettar</A">http://www.teleport.com/~hettar</A</A>> --------------230F4AB332AAEEF631124926 Content-Type: text/html; charset=us-ascii Content-Transfer-Encoding: 7bit <HTML> >> Steven Udell wrote: > > > > > I am wondering if I can get this AGP XPERT@WORK card going > > > So it goes on to ask me which server: I pick Mach64 server > > Then it asks me about RAMDAC and Clock settings(somethign) here > > is what I don't know what to put.. anyone help me on this exactly? > > > > Everything else I can set up except this card ;) help please. Had it fixed about an hour after I posted this message 3 weeks ago <G> Your right, just skip the ramdac and clock settings, and with the upgraded X server from suse( I thought I had the most recent version, but I did not) so with the newest version my card was listed and then everything was easy. _________________________________old ^ _____new (down) Works fine now except one thing err or two things... I get some little white dots verticly up and down X in 600x600 mode 32bit (with virtual 1200x1270 or somethen) but in any other I don't get them. (bugs the heck out of me). I gona put 4 more megs of ram in see if that helps(on AGP card) Ill post on this message tomarrow see if that does the trick *and the second problem, which as far as I know does not hinder *anything, when I shut down X I get a message *mach64ProgramClkMach64CT: warning : Q < 10.66666667 *strange (clock somethen or other is about all I can make of this) *anyone know??? -- Steven Udell Wayfarers hettar(a)teleport.com for truth love sudell(a)teleport.com and courage http://www.teleport.com/~hettar">http://www.teleport.com/~hettar</A> </HTML> --------------230F4AB332AAEEF631124926-- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] PPPD Dies
by jkrough＠mindspring.com 11 Mar '98

11 Mar '98

I am using kppp. PPPD dies while a connection is being made with my ISP. This is the output of /var/log/messages Mar 11 01:01:37 cojones kernel: registered device ppp0 Mar 11 01:01:37 cojones pppd[167]: pppd 2.2.0 started by jerry, uid 501 Mar 11 01:01:37 cojones pppd[167]: Using interface ppp0 Mar 11 01:01:37 cojones pppd[167]: Connect: ppp0 <--> /dev/cua2 Mar 11 01:02:07 cojones pppd[167]: LCP: timeout sending Config-Requests Mar 11 01:02:07 cojones pppd[167]: Connection terminated. Mar 11 01:02:07 cojones pppd[167]: Receive serial link is not 8-bit clean: Mar 11 01:02:07 cojones pppd[167]: Problem: all had bit 7 set to 0 Mar 11 01:02:17 cojones pppd[167]: Hangup (SIGHUP) Mar 11 01:02:17 cojones pppd[167]: ioctl(TIOCNXCL): I/O error Mar 11 01:02:17 cojones pppd[167]: Exit. /ppp/options is empty, suid is set and as far as I know the proper permissions are set. I have followed and set up kppp according to the kppp help file. I believe the problem has to do with "serial link is not 8-bit clean" and I have no idea what the message is referring to. Any help would be appreciated. Jerome K. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] FTP madness!
by jrodman＠tbw.net 11 Mar '98

11 Mar '98

On Tue, 10 Mar 1998 dedwards(a)technologist.com wrote: > On 9 Mar, jonathan(a)aracnet.net wrote: > > > > > > [<A HREF="http://www.aracnet.net/~jonathan/linux.html"><A HREF="http://www.aracnet.net/~jonathan/linux.html</A">http://www.aracnet.net/~jonathan/linux.html</A</A>> if you're interested] I use > > command-line FTP (like a real man) and it would send all bytes and freeze > > at the end. The result was a 0 byte file! I had to mail the file to the > > ISP and they put it there. I complained, they said it was my end and I > > insisted it was theirs. > > > I've had a similar problem when trying to ftp to an IBM Mainframe Host. > If I used Microslops commandline ftp tool, no problems, when I used > the commandline ftp tool from a Sunsparc4 - SunOS, logon was fine, but > when I did anything else, the process would freeze. > If anyone has a solution, I for 2 would be interested:-)) Stupid suggestion. Tried ncftp, netscape, or any other implementation of the ftp protocol? -josh -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Problems... Please, help.
by luis＠lac.resonet.com 11 Mar '98

11 Mar '98

On Tue, 10 Mar 1998, Simone Castellaneta wrote: > ------------- > > I' ve found that I don' t have "nslookup" command (bash: command not found) > and it' s true!! Which packet does it belong to? > > ------------- I think it's in the bind package, just do a search from within yast, with the word nslookup. I think it's pretty silly to not make nslookup a default for this package, maybe the suse boys are listening right now :) > I' ve configured Linux to access Internet through a modem and ppp > connection but when I fire up the connection I get this in /var/log/messages: nip snip snip > Mar 6 19:21:36 Voyager pppd[802]: local IP address local.ip.address > Mar 6 19:21:36 Voyager pppd[802]: remote IP address remote.ip.address > Yes, so what's the problem? your ISP gave you your IP, you can't be in too bad shape. > I would like to make Sendmail working in something like "off-line mode", > that is, if I write and send an email using Pine, and I' m not connected to > Internet at that moment, the mail is not sent immediately but it is queued > and will be sent at the next mail check. > How could I do this? dnl enable the following two lines, if you have a dialup connection dnl and want to queue all email until "sendmail -q" is started. dnl dnl define(`confCON_EXPENSIVE', `True')dnl dnl define(`SMTP_MAILER_FLAGS',`e')dnl In /etc/mail you'll find a file called linux.mc Make a copy of it as backup, do what the above instructions tell you to do. Make sure you read the README in this directory. Make a backup of /etc/sendmail.cf too. > Sometimes I get this in /var/log/messages > > Mar 6 20:00:00 Voyager /USR/SBIN/CRON[866]: (root) CMD (test -x > /usr/sbin/faxqclean && /usr/sbin/faxqclean) > > What does it mean? While logged in as root do this crontab -e this will throw you into the crontab file for root (edit mode) , you should see an entry there for faxqclean. This entry in the messages file is just informative telling you the scheduled event was kicked off. If you don't want this to happen , just comment out the line. -- Lou A. Costabile Voice and Fax: [613] 781-7061 <A HREF="mailto:luis@lac.resonet.com">mailto:luis@lac.resonet.com</A> To get Receipt Notification include %rec% anywhere in the Subject field. -- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] FTP madness!
by dedwards＠technologist.com 11 Mar '98

11 Mar '98

On 9 Mar, jonathan(a)aracnet.net wrote: > > > I have been having difficulty uploading my web page... > [<A HREF="http://www.aracnet.net/~jonathan/linux.html"><A HREF="http://www.aracnet.net/~jonathan/linux.html</A">http://www.aracnet.net/~jonathan/linux.html</A</A>> if you're interested] I use > command-line FTP (like a real man) and it would send all bytes and freeze at the > end. The result was a 0 byte file! I had to mail the file to the ISP and they > put it there. I complained, they said it was my end and I insisted it was > theirs. > > It happened again the other day, so I thought I would show them, rebooted to > Win95, fired up command-line FTP and... > > It worked. > > I refuse to be reliant on Wingdings for anything. Besides, the Internet is > Linux' playground! What's going on here? Any hints? Has anyone else had this > problem? > > --- I've had a similar problem when trying to ftp to an IBM Mainframe Host. If I used Microslops commandline ftp tool, no problems, when I used the commandline ftp tool from a Sunsparc4 - SunOS, logon was fine, but when I did anything else, the process would freeze. If anyone has a solution, I for 2 would be interested:-)) -- Dave E. -Linux 2.0.30 -SuSE 5.0-- Linux - the choice of a GNU Generation--- No more Blue screen of Death - and no regrets - Goodbye Microsoft! ----------------------Cyrix 586/100-32meg-2g----------------------- SHAMELESS Plug:-- dedwards(a)technologist.com 23yr of MF exp. avail. for home-based outsourcing contracts. ------------------------------------------------------------------- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] PAP
by chaos＠odn.de 11 Mar '98

11 Mar '98

HiHo... >I am not a guru at all but I have never heared of PAP before?=0D >What does it stand for?=0D password authenticaton protocoll (i think) it=B4s used to send your login= and password to the provider... normally yast should do everything for you by default - if not: /etc/ppp/pap-secrets: "login" * "password" that=B4s all (i think) o far... =00=00 -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] PAP
by chaos＠odn.de 11 Mar '98

11 Mar '98

HiHo... >I am not a guru at all but I have never heared of PAP before?=0D >What does it stand for?=0D password authenticaton protocoll (i think) it=B4s used to send your login= and password to the provider... normally yast should do everything for you by default - if not: /etc/ppp/pap-secrets: "login" * "password" that=B4s all (i think) o far... =00=00 -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] PAP
by nzanella＠cs.mun.ca 11 Mar '98

11 Mar '98

I am not a guru at all but I have never heared of PAP before? What does it stand for? Neil Zanella nzanella(a)ganymede.cs.mun.ca On Tue, 10 Mar 1998, Ron Lavoie wrote: > > My ISP uses PAP. Can anyone tell me how this affects my PPP setup? > -- > To get out of this list, please send email to majordomo(a)suse.com with > this text in its body: unsubscribe suse-linux-e > -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] PAP
by nzanella＠cs.mun.ca 11 Mar '98

11 Mar '98

I am not a guru at all but I have never heared of PAP before? What does it stand for? Neil Zanella nzanella(a)ganymede.cs.mun.ca On Tue, 10 Mar 1998, Ron Lavoie wrote: > > My ISP uses PAP. Can anyone tell me how this affects my PPP setup? > -- > To get out of this list, please send email to majordomo(a)suse.com with > this text in its body: unsubscribe suse-linux-e > -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

RE: [S.u.S.E. Linux] PAP
by gecko＠freecar.com 11 Mar '98

11 Mar '98

You have to use the pap-secrets file. Check the PPP how-to file, it's very very good. /usr/doc/howto or /usr/doc/howto/mini.. I forgot which On 11-Mar-98 Ron Lavoie wrote: > >My ISP uses PAP. Can anyone tell me how this affects my PPP setup? >-- >To get out of this list, please send email to majordomo(a)suse.com with >this text in its body: unsubscribe suse-linux-e ---------------------------------- <A HREF="http://homepages.skylink.net/~gecko/index.html"><A HREF="http://homepages.skylink.net/~gecko/index.html</A">http://homepages.skylink.net/~gecko/index.html</A</A>> -----BEGIN GEEK CODE BLOCK----- Version: 3.1 GCS d+(-) s:+ a29 C++$ UL++>++++ P+++$ L++>++++ E? W+++$ N+(-) o? K- w+++$(--) O M-- V- PS-- PE++ Y++ PGP++ t+ 5 X R+ !tv b++++ DI+++ D++ G++>G+++ e h+ r* y+ ------END GEEK CODE BLOCK------ <A HREF="http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html"><A HREF="http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html</A">http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html</A</A>> ---------------------------------- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] PAP
by lavoie＠netcom.ca 11 Mar '98

11 Mar '98

My ISP uses PAP. Can anyone tell me how this affects my PPP setup? -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

RE: [S.u.S.E. Linux] Problems... Please, help.
by gecko＠freecar.com 10 Mar '98

10 Mar '98

Try moving .fvwm95rc file into your home directory. That's usually /root if you log in all the time as root or /home/name if you login under username=name. On 10-Mar-98 Simone Castellaneta wrote: >Thanks. Now it looks better but at any new installation with Yast, the >configuration is switched back to the old one and I have to edit .fvwm95rc >again to restore my settings: how do I tell Yast to use my configuration as >default? ---------------------------------- <A HREF="http://homepages.skylink.net/~gecko/index.html"><A HREF="http://homepages.skylink.net/~gecko/index.html</A">http://homepages.skylink.net/~gecko/index.html</A</A>> -----BEGIN GEEK CODE BLOCK----- Version: 3.1 GCS d+(-) s:+ a29 C++$ UL++>++++ P+++$ L++>++++ E? W+++$ N+(-) o? K- w+++$(--) O M-- V- PS-- PE++ Y++ PGP++ t+ 5 X R+ !tv b++++ DI+++ D++ G++>G+++ e h+ r* y+ ------END GEEK CODE BLOCK------ <A HREF="http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html"><A HREF="http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html</A">http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html</A</A>> ---------------------------------- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

RE: [S.u.S.E. Linux] Problems... Please, help.
by gecko＠freecar.com 10 Mar '98

10 Mar '98

Your CRON demon is running the root crontab (table).. it was set up by YAST when you installed the fax software (SuSEfax, I think...???) If you were to have composed a fax, this little program would either come by and clean it up (it having already been sent) or, more likely, come by and send it then clean it up. On 10-Mar-98 Simone Castellaneta wrote: >Sometimes I get this in /var/log/messages > >Mar 6 20:00:00 Voyager /USR/SBIN/CRON[866]: (root) CMD (test -x >/usr/sbin/faxqclean && /usr/sbin/faxqclean) > >What does it mean? > ---------------------------------- <A HREF="http://homepages.skylink.net/~gecko/index.html"><A HREF="http://homepages.skylink.net/~gecko/index.html</A">http://homepages.skylink.net/~gecko/index.html</A</A>> -----BEGIN GEEK CODE BLOCK----- Version: 3.1 GCS d+(-) s:+ a29 C++$ UL++>++++ P+++$ L++>++++ E? W+++$ N+(-) o? K- w+++$(--) O M-- V- PS-- PE++ Y++ PGP++ t+ 5 X R+ !tv b++++ DI+++ D++ G++>G+++ e h+ r* y+ ------END GEEK CODE BLOCK------ <A HREF="http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html"><A HREF="http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html</A">http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html</A</A>> ---------------------------------- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Hosts Problem
by bb＠suse.com 10 Mar '98

10 Mar '98

Jim Hatridge wrote: > > Hi All; > > A few weeks ago, A friend wrote about how to use shortcuts on > Lynx/Netscape. For example: in your hosts file put this in: > > 199.184.169.70 www.linuxgazette.com lj > > Now I should be able to just type in "lj" to get to the Linux Gazette web > page. BUT, in stead I'm getting this error: > > *************************************************************************** > ERROR > > The requested URL could not be retrieved > > _________________________________________________________________ > > While trying to retrieve the URL: <A HREF="http://lj/"><A HREF="http://lj/</A">http://lj/</A</A>> > > The following error was encountered: > * DNS name lookup failure > > The system returned: > DNS Domain 'lj' is invalid: Host not found (authoritative). > > This means that: > The named host probably does not exist. > > _________________________________________________________________ > > Generated by squid/1.1.17(a)proxy.straubing.baynet.de > > ****************** end of Error listing ************************ If you use a proxy, the proxy will try to resolv the hostname, not your lokal host, so you have to make sure, that this line is in /etc/hosts on the machine, that runs the proxy. But anyway, I'm not sure if squid uses /etc/hosts at all. It uses a subprocess called 'dnserver' to speed up DNS rewuests, it may be, that this bypasses /etc/hosts... Disable the proxy in your browser and try again, this should work... Ciao, BB -- Bodo Bauer S.u.S.E., LLC fon +1-510-835 7873 bb(a)suse.de 458 Santa Clara Avenue fax +1-510-835 7875 <A HREF="http://www.suse.com"><A HREF="http://www.suse.com</A">http://www.suse.com</A</A>> Oakland CA, 94610 USA -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Hosts Problem
by morche＠sat1.de 10 Mar '98

10 Mar '98

Jim Hatridge wrote: ... > A few weeks ago, A friend wrote about how to use shortcuts on > Lynx/Netscape. For example: in your hosts file put this in: > > 199.184.169.70 www.linuxgazette.com lj > > Now I should be able to just type in "lj" to get to the Linux Gazette web > page. BUT, in stead I'm getting this error: > > *************************************************************************** > ERROR > > The requested URL could not be retrieved > > _________________________________________________________________ > > While trying to retrieve the URL: <A HREF="http://lj/"><A HREF="http://lj/</A">http://lj/</A</A>> > > The following error was encountered: > * DNS name lookup failure ... Probably You do use a proxied connection. In that case the host that runs the proxy will do the DNS lookup. That host doesn't know anything of Your /etc/hosts... -- Matthias Morche (<A HREF="mailto:morche@sat1.de">mailto:morche@sat1.de</A>) SAT.1 (<A HREF="http://www.sat1.de"><A HREF="http://www.sat1.de</A">http://www.sat1.de</A</A>>) >>> Linux: the greatest adventure game since the invention of the PC <<< -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] Problems... Please, help.
by scastell＠wavenet.it 10 Mar '98

10 Mar '98

Hello. Thanks for your help answering my last mail. I' ve replied but none seems to read my mail. Please, if you can, help me. ------------- I' ve found that I don' t have "nslookup" command (bash: command not found) and it' s true!! Which packet does it belong to? ------------- I' ve configured Linux to access Internet through a modem and ppp connection but when I fire up the connection I get this in /var/log/messages: Mar 6 19:21:09 Voyager kernel: CSLIP: code copyright 1989 Regents of the University of California Mar 6 19:21:09 Voyager kernel: PPP: version 2.2.0 (dynamic channel allocation) Mar 6 19:21:09 Voyager kernel: PPP Dynamic channel allocation code copyright 1995 Caldera, Inc. Mar 6 19:21:09 Voyager kernel: PPP line discipline registered. Mar 6 19:21:09 Voyager kernel: registered device ppp0 Mar 6 19:21:09 Voyager pppd[802]: pppd 2.2.0 started by root, uid 0 Mar 6 19:21:10 Voyager chat[805]: send (ATZ^M) Mar 6 19:21:10 Voyager chat[805]: expect (OK) Mar 6 19:21:10 Voyager chat[805]: ATZ^M^M Mar 6 19:21:10 Voyager chat[805]: OK -- got it Mar 6 19:21:10 Voyager chat[805]: send (ATL2M1X4DTnumber^M) Mar 6 19:21:11 Voyager chat[805]: expect (name) Mar 6 19:21:11 Voyager chat[805]: ^M Mar 6 19:21:28 Voyager chat[805]: ATL2M1X4DTnumber^M^M Mar 6 19:21:28 Voyager chat[805]: CONNECT 33600/ARQ/V34/LAPM/V42BIS^M Mar 6 19:21:31 Voyager chat[805]: ^M Mar 6 19:21:31 Voyager chat[805]: ^M Mar 6 19:21:31 Voyager chat[805]: User Access Verification^M Mar 6 19:21:31 Voyager chat[805]: ^M Mar 6 19:21:31 Voyager chat[805]: Username -- got it Mar 6 19:21:31 Voyager chat[805]: send (myusername^M) Mar 6 19:21:31 Voyager chat[805]: expect (word) Mar 6 19:21:31 Voyager chat[805]: : myusername^M Mar 6 19:21:31 Voyager chat[805]: Password -- got it Mar 6 19:21:31 Voyager chat[805]: send (mypassword^M) Mar 6 19:21:32 Voyager chat[805]: expect (>) Mar 6 19:21:32 Voyager chat[805]: : ^M Mar 6 19:21:32 Voyager chat[805]: gw-ts1.wavenet.it> -- got it Mar 6 19:21:32 Voyager chat[805]: send (ppp default^M) Mar 6 19:21:32 Voyager pppd[802]: Serial connection established. Mar 6 19:21:33 Voyager pppd[802]: Using interface ppp0 Mar 6 19:21:33 Voyager pppd[802]: Connect: ppp0 <--> /dev/modem Mar 6 19:21:33 Voyager pppd[802]: sent [LCP ConfReq id=0x1 <mru 1500> <magic 0xb32cd551> <pcomp> <accomp>] Mar 6 19:21:35 Voyager pppd[802]: rcvd [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x6a5fcab> <pcomp> <accomp>] Mar 6 19:21:35 Voyager pppd[802]: sent [LCP ConfAck id=0x1 <asyncmap 0xa0000> <magic 0x6a5fcab> <pcomp> <accomp>] Mar 6 19:21:36 Voyager pppd[802]: sent [LCP ConfReq id=0x1 <mru 1500> <magic 0xb32cd551> <pcomp> <accomp>] Mar 6 19:21:36 Voyager pppd[802]: rcvd [LCP ConfAck id=0x1 <mru 1500> <magic 0xb32cd551> <pcomp> <accomp>] Mar 6 19:21:36 Voyager pppd[802]: sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <compress VJ 0f 01>] Mar 6 19:21:36 Voyager pppd[802]: sent [IPXCP ConfReq id=0x1 <network 0> <node 000051f86d52> <router proto 2> <complete>] Mar 6 19:21:36 Voyager pppd[802]: rcvd [IPCP ConfReq id=0x1 <compress VJ 0f 00> <addr remote.ip.address>] Mar 6 19:21:36 Voyager pppd[802]: sent [IPCP ConfAck id=0x1 <compress VJ 0f 00> <addr remote.ip.address>] Mar 6 19:21:36 Voyager pppd[802]: rcvd [IPCP ConfNak id=0x1 <addr local.ip.address>] Mar 6 19:21:36 Voyager pppd[802]: sent [IPCP ConfReq id=0x2 <addr local.ip.address> <compress VJ 0f 01>] Mar 6 19:21:36 Voyager pppd[802]: rcvd [LCP ProtRej id=0x2 80 2b 01 01 00 18 01 06 00 00 00 00 02 08 00 00 51 f8 6d 52 04 04 00 02 06 02] Mar 6 19:21:36 Voyager pppd[802]: rcvd [IPCP ConfAck id=0x2 <addr local.ip.address> <compress VJ 0f 01>] Mar 6 19:21:36 Voyager pppd[802]: local IP address local.ip.address Mar 6 19:21:36 Voyager pppd[802]: remote IP address remote.ip.address This is my connection script: # !/bin/bash /usr/sbin/pppd connect 'chat -v "" "ATZ" "OK" "ATL2M1X4DTnumber" "name" "myusername" "word" "mypassword" ">" "ppp default" "" ' /dev/modem 38400 debug crtscts modem defaultroute noipdefault remotename wavenet Is it correct? After login sequence all seems to be ok. ------------- I' m trying to set up a screen saver via xlock but it always say "xlock: Can not get hostbyname" and it stops. I would like, after X minutes idle, to activate an animated screen saver, like 'dows does. What can I do? ------------- If it is not possible to use xlock, also a black screen is fine, but I' m unable to tell "xset" to blank the screen after X minutes idle. ------------- I would like to make Sendmail working in something like "off-line mode", that is, if I write and send an email using Pine, and I' m not connected to Internet at that moment, the mail is not sent immediately but it is queued and will be sent at the next mail check. How could I do this? ------------- Sometimes I get this in /var/log/messages Mar 6 20:00:00 Voyager /USR/SBIN/CRON[866]: (root) CMD (test -x /usr/sbin/faxqclean && /usr/sbin/faxqclean) What does it mean? ------------- >A few quick guesses: >- could it be, that irq12 is used by some other device like an onboard >mouse (some systems use irq12 for that) I tried, from Dos, to run "msd" but nothing seems wrong: apparently, the Ethernet card is the only device using Irq 12. >- did you recompile or use a modul for eth0? if have a look at >/etc/conf.modules, search for ne2000 and correct io-adress and irq. I >have gotten mad with that one. I didn' t recompile yet... as I' m not so skilled, I prefer not to risk. The strange fact is that, during installation, it was recognized but then not! /etc/conf.modules is already ok: all options are set correctly. I' ve tried to insert some parameters to Lilo (append, etc. etc.) but it still does not work. >------------- >Suse uses my HP Deskjet 850C printer via "hpdj" driver (found in Yast >printer setup) but I' m unable to make it printing colors: black and white >only. :(((( What am I doing wrong? Any ideas?? >>------------- >>As window manager, I use FVWM95 in 640X480 (my old monitor does not allow >>higher resolutions) and there is a button bar on the top of the screen >>(FvwmBanner? FvwmButtons?) that exceed screen lenght, hiding a lot of >>buttons. I would like to resize it removing some of them (for example >>Xeyes and one of the clocks) and resize the Pager from 6 screens to 4. I >>succeded doing the last thing by editing .fvwm95rc but the size of the >>pager is unchanged: now I have 4 stretched rectangles! >>What can I do? >The buttons on the top is FvwmButtons. For the most part, it dynamicly >allocates sizes and you have to do little tricks to get it to a different >size. Try reading the man page `man FvwmButtons` for an idea on how to do >it. I don't remember off the top of my head. Thanks. Now it looks better but at any new installation with Yast, the configuration is switched back to the old one and I have to edit .fvwm95rc again to restore my settings: how do I tell Yast to use my configuration as default? Thanks for your patience. :) Bye. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] SAMBA problems
by superdude_39＠hotmail.com 10 Mar '98

10 Mar '98

Pascal wrote: > >OK, here's a (rather simple, but typical) configuration... >I'll send you a more complex later... > >P.S.: I perfectly speak french & german, so if you prefer... > >Pascal > You seem to speak very good Samba as well! Thanks! I'll customize for my environment and let you know how it goes. Yours is the best example of a *working* smb.conf I have ever seen - and the comments are great! I never had too much of a problem with Samba prior to NT 4.0 SP3, and some of the new changes in Samba itself since 1.9.16. Thanks again! -tks- ______________________________________________________ Get Your Private, Free Email at <A HREF="http://www.hotmail.com"><A HREF="http://www.hotmail.com</A">http://www.hotmail.com</A</A>> -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] Hosts Problem
by hatridge＠straubing.baynet.de 10 Mar '98

10 Mar '98

Hi All; A few weeks ago, A friend wrote about how to use shortcuts on Lynx/Netscape. For example: in your hosts file put this in: 199.184.169.70 www.linuxgazette.com lj Now I should be able to just type in "lj" to get to the Linux Gazette web page. BUT, in stead I'm getting this error: *************************************************************************** ERROR The requested URL could not be retrieved _________________________________________________________________ While trying to retrieve the URL: <A HREF="http://lj/"><A HREF="http://lj/</A">http://lj/</A</A>> The following error was encountered: * DNS name lookup failure The system returned: DNS Domain 'lj' is invalid: Host not found (authoritative). This means that: The named host probably does not exist. _________________________________________________________________ Generated by squid/1.1.17(a)proxy.straubing.baynet.de ****************** end of Error listing ************************ I'm running SuSE 4.4.1 (kernal 2.0.29) and my ISP is running a SuSE Apache server. My friend states that it works on his system, but I don't think that he has a proxy. Could my problem be with the proxy or what does anyone think? Thanks for your help! JIM ----------------------------------------- Jim Hatridge Germany hatridge(a)straubing.baynet.de ___________ News Flash! -------------- News Flash! ___________________ Yesterday, a ferry boat leaving Haiti sunk and 300 people died, drowned, as the boat capsized. But a tragedy was avoided when they discovered that none of them on board was a Princess. --- Harlan Ellison, InterZone -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] [Fwd: "Sizing the Linux market, 1998" survey posted.]
by netd＠fastrans.net 10 Mar '98

10 Mar '98

This is a multi-part message in MIME format. --------------E6B17F464FFB4C799D3591CC Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Bob Young wrote: > For anyone interested, we've updated our survey of the known data on > the Linux using market. > > It is available at: > > <A HREF="http://www.redhat.com"><A HREF="http://www.redhat.com</A">http://www.redhat.com</A</A>> under "about us" in the Whitepapers section. > > Based on the latest data from sources as diverse as Dr Dobbs to > Datapro (Gartner Group) it would appear that the number of Linux > users has doubled in the last 12 months. > > Cheers, Bob. > > Red Hat Software, Inc.----------------------------------------- > Phone 919-547-0012 x227 Fax 919-547-0024 > P.O. Box 13588 email: bob(a)redhat.com > Research Triangle Park, NC 27709 <A HREF="http://www.redhat.com"><A HREF="http://www.redhat.com</A">http://www.redhat.com</A</A>> --------------E6B17F464FFB4C799D3591CC Content-Type: message/rfc822 Content-Transfer-Encoding: 7bit Content-Disposition: inline Received: from iiug.iiug.org ([206.175.175.254]) by maat.fastrans.net (8.8.8/8.6.12) with ESMTP id XAA12867 for <netd(a)fastrans.net>; Mon, 9 Mar 1998 23:27:43 -0600 (CST) Received: (from majordom@localhost) by iiug.iiug.org (8.7.5/8.7.3) id WAA18148; Mon, 9 Mar 1998 22:17:55 -0600 (CST) Received: from lacrosse.redhat.com (lacrosse.redhat.com [207.175.42.154]) by iiug.iiug.org (8.7.5/8.7.3) with ESMTP id WAA18144 for <linux-informix(a)iiug.org>; Mon, 9 Mar 1998 22:17:50 -0600 (CST) Received: from bobster.redhat.com (root(a)bobsled.redhat.com [199.183.24.65]) by lacrosse.redhat.com (8.8.7/8.8.7) with ESMTP id XAA17449 for <linux-informix(a)iiug.org>; Mon, 9 Mar 1998 23:17:45 -0500 Received: from bobster.redhat.com (bob@localhost [127.0.0.1]) by bobster.redhat.com (8.8.7/8.8.7) with ESMTP id XAA01730 for <linux-informix(a)iiug.org>; Mon, 9 Mar 1998 23:18:12 -0500 Message-Id: <199803100418.XAA01730(a)bobster.redhat.com> X-Mailer: exmh version 2.0zeta 7/24/97 To: linux-informix(a)iiug.org Subject: "Sizing the Linux market, 1998" survey posted. Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Mon, 09 Mar 1998 23:18:10 -0500 From: Bob Young <bob(a)redhat.com> Precedence: normal Reply-To: linux-informix(a)iiug.org For anyone interested, we've updated our survey of the known data on the Linux using market. It is available at: <A HREF="http://www.redhat.com"><A HREF="http://www.redhat.com</A">http://www.redhat.com</A</A>> under "about us" in the Whitepapers section. Based on the latest data from sources as diverse as Dr Dobbs to Datapro (Gartner Group) it would appear that the number of Linux users has doubled in the last 12 months. Cheers, Bob. Red Hat Software, Inc.----------------------------------------- Phone 919-547-0012 x227 Fax 919-547-0024 P.O. Box 13588 email: bob(a)redhat.com Research Triangle Park, NC 27709 <A HREF="http://www.redhat.com"><A HREF="http://www.redhat.com</A">http://www.redhat.com</A</A>> --------------E6B17F464FFB4C799D3591CC-- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] smb.conf
by pbleser＠prov-liege.be 10 Mar '98

10 Mar '98

I've take a look at your previous mail again... there seems to be kind of a messup in your network configuration... (wrong netid+netmask ?) And there's one wrong line in your smb.conf (if you didn't make a mistake when you typed it ;-) ) Could you get it working yet ? What's _really_ the problem ? Can't people see the Linux box in the network neighborhood ? Pascal -----Original Message----- From: Patrick Kirk <pkirk(a)enterprise-hr.com> To: suse-linux-e(a)suse.com <suse-linux-e(a)suse.com> Cc: 'Pascal Bleser' <pbleser(a)prov-liege.be> Date: Monday, March 09, 1998 5:29 PM Subject: [S.u.S.E. Linux] smb.conf > > >Pascal, > >The Win95 machines use the c:\windows\HOSTS for name resolution and the >Linux box address is in there. > >You're right about the SMB nor being set up properly. Question is how and >why?:( Having rather publically said we could do this, I have to get a >result here. If there's anything more you need, just send a reply. The >guide I've been using is the Linux 5.1 manual and I've read the SAMBA howto >and FAQ. > > The network details are as follows: > >Workgroup->enterprise >Protocol->TCP/IP >Linux IP address 102.54.100.166 >Linux name->P166 >Other IP addresses->102.54.100.10, 102.54.100.120, 102.54.100.5, etc. ===> I guess you have a 102.54.100./255.255.255.0 IP network... that's different from what you had as a message from nmblookup in your last mail... Samba thinks you have a 102.54./255.255.0.0 network; that's why he says 'network unreachable'. >Other IP addresses->P10, P120, P5, etc. >All listed in the /etc/hosts file and neatly pingable by address. > >Part of smb.conf is as follows... > >[global] > workgroup = enterprise > guest account = nobody > keep alive = 30 > os level = user ===> that's wrong... it should be: os level = 0 (or more than 32 if you want to take control over the network ;-) ) security = user > printing = bsd > printcap name = /etc/printcap > load printers = yes > > wins support = no > >[homes] > comment = home directory > browseable = yes > read only = yes > create mode = 0750 > > >Best regards, > >Patrick Kirk >Enterprise Human Resources >Tel: 0044 118 939 1122 Fax: 0044 118 939 3388 >Executive Opportunities at www.enterprise-hr.com E-mail >pkirk(a)enterprise-hr.com > > >-- >To get out of this list, please send email to majordomo(a)suse.com with >this text in its body: unsubscribe suse-linux-e > -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] dynamische ip-adressen II
by chaos＠odn.de 10 Mar '98

10 Mar '98

HILFEEEE !!! nachschlag: und seit der umstellung auf dynamische ip-adresen waehlt sich= der rechner alle paar sekunden wieder ein !!! was nun ??? =00=00 -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] SAMBA problems
by pbleser＠prov-liege.be 10 Mar '98

10 Mar '98

This is a multi-part message in MIME format. ------=_NextPart_000_0093_01BD4C39.354C6D90 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit And this time with the file (damn! sorry, people...) !! --------------------------------------------------------------------- OK, here's a (rather simple, but typical) configuration... I'll send you a more complex later... P.S.: I perfectly speak french & german, so if you prefer... Pascal >> >>-----Original Message----- >>From: Tom Schaefer <netd(a)fastrans.net> >>To: suse-linux-e(a)suse.com <suse-linux-e(a)suse.com> >>Date: Tuesday, March 10, 1998 2:21 AM >>Subject: Re: [S.u.S.E. Linux] SAMBA problems >> >> >>> >>>Pascal, >>> >>>Please post your working smb.conf. >>> >>>I have had problems also, as there are some newer hooks that need to be >>>adjusted since NT SP3 ... >>> >>>Thanks! >>>-tks- >>> >>> >>>Pascal Bleser wrote: >>> >>>> If you want more tips about a "NT & 95 vs Linux" network, 'mail with me' >>;-) >>>> We have a 80-machines network with a primary (NT 4.0) domain server, >>>> DNS+DHCP+Apache on a Linux Server and many, many 95 & NT (as well as >some >>>> Linux) hosts... >>> >>>-- >>>To get out of this list, please send email to majordomo(a)suse.com with >>>this text in its body: unsubscribe suse-linux-e >>> >> > > ------=_NextPart_000_0093_01BD4C39.354C6D90 Content-Type: application/octet-stream; name="smb_conf.log" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="smb_conf.log" Here's the smb.conf SaMBa configuration file of a host called 'Student' in a workgroup called 'NT_LPO'... The domain server (password server) is a NT host called 'Neptune'. It's Samba v1.9.16p11 with S.u.S.E. 5.0 and suse-kernel 2.0.33 . This smb.conf doesn't contain many smart moves, but it's a good example configuration, I believe... I added some comments to try and make it clear to everybody; if there's still something that looks weird to you, just ask me - it'll be a pleasure to help you out !! Anyway, take a good look (and some time ;-) ) at the man page: > man smb.conf I'll send you a more complex configuration (another LAN) later (this afternoon or tomorrow). Have a nice day ! Pascal (pbleser(a)prov-liege.be) ----------------------------------------------------------------- bleser@Student:/etc > cat smb.conf [global] workgroup =3D NT_LPO guest account =3D nobody ; ^-- still have to create a proper account ;-) ; \ something like guest,samba or smbguest should be better browseable =3D yes ; public =3D yes ; ^-- watch it ! if you put "public =3D yes" here, the entire ; \ host will accessed through the "guest account" keep alive =3D 30 os level =3D 0 ; ^-- this defines the value given by Samba when a domain server ; : election happens... the higher, the better; in this case, ; : I don't want this host to take control over the domain, so ; : I put '0' (Nt uses 2 as a default, I think) - to take the ; : control of the domain, put something higher than 32 ; : (because 32 is the highest value for an NT host 8^D, and ; \ Samba can go up to 128) ; security =3D user ; ^-- if this is enabled (and the one below disabled, of course), ; : then the passwords the user uses to enter the share(s) are ; : the ones of the Linux host... on the contrary, if you set ; : security to server ("security =3D server"), then you must ; : specify the name (without \\) of the domain server ; : ('neptune' here) and the passwords will be validated by ; : that host. With that feature, users won't need to reenter ; : their username & password when they want to access a Samba ; : share (that's not "public", of course - no password needed ; : then: the user browses the share as the 'guest account') ; : because they've already entered it when they made their ; \ network neighborhood logon. security =3D server password server =3D neptune ; ^--'Neptune' is the NT domain server (remember: not \\Neptune, but = Neptune) printing =3D bsd printcap name =3D /etc/printcap load printers =3D yes auto services =3D public ; ^-- what services should automatically be available default service =3D public ; ^-- no idea, but "auto services" & "default service" should be = specified, ; \ it avoids some problems (host access denied, ...) server string =3D "Linux 2.0.33 [www-server]" ; ^-- the comment that will apear besides the host in the network = neighborhood hosts allow =3D 10.10. ; ^-- the only hosts that can access the current host have IP addresses = like: ; : 10.10.9.23, 10.10.89.243, 10.10.0.1, ... ... ; : it's optional, of course... you don't need to have a "hosts allow = =3D ..." line. ; \ I'm sure you already guessed it, but you can also put a "hosts = deny =3D ...". preserve case =3D yes ; ^-- if you don't put this, Samba will automatically convert filenames = into ; \ lowercase - you can override this in the each share =20 ; If you want Samba to act as a wins server, please set ; 'wins support =3D yes' wins support =3D no =20 ; If you want Samba to use an existing wins server, ; please uncomment the following line and replace ; the dummy with the wins server's ip number. ; wins server =3D 192.168.1.1 =20 [homes] comment =3D Home directories read only =3D yes create mode =3D 0750 =20 [public] ; ^-- this is a public repository where all users can browse into ; : to 'download' stuff... the only users who can write into it ; \ are part of the Linux group 'admin' (see: write list) comment =3D Public share browseable =3D yes public =3D yes write list =3D @admin path =3D /home/shared =20 [www] ; ^-- like this, admin users (group 'admin') and the webmaster ; (account 'web') can work on the index & stuff of the ; website (and they're the only ones who can access the ; share: "valid users =3D ..." combined with "public =3D no") comment =3D WebSite (htdocs) browseable =3D yes read only =3D no public =3D no path =3D /usr/local/httpd/htdocs valid users =3D web, @admin create mode =3D 0755 =20 [www.cgi] comment =3D WebSite (cgi-bin) browseable =3D yes read only =3D no public =3D no path =3D /usr/local/httpd/cgi-bin valid users =3D @admin, @cgi create mode =3D 0755 =20 [www.etc] comment =3D WebSite (Apache configuration) browseable =3D yes read only =3D yes public =3D no path =3D /etc/httpd valid users =3D @admin create mode =3D 0754 =20 [log] comment =3D System Logs browseable =3D yes read only =3D yes public =3D no path =3D /var/log valid users =3D @admin create mode =3D 0754 =20 [docs] comment =3D System Docs browseable =3D yes read only =3D yes public =3D no path =3D /usr/doc valid users =3D @admin,marechal create mode =3D 0754 =20 ; The following share gives all users access to the Server's CD drive, ; assuming it is mounted under /cd. To enable this share, please remove ; the semicolons before the lines ; ; [cdrom] ; comment =3D Linux CD-ROM ; path =3D /cd ; read only =3D yes ; locking =3D no =20 ;[printers] ; comment =3D All Printers ; browseable =3D no ; printable =3D yes ; public =3D no ; read only =3D yes ; create mode =3D 0700 ; directory =3D /tmp ------=_NextPart_000_0093_01BD4C39.354C6D90-- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] xsvga server from suse folks worked ...
by C.Schneider＠iaea.org 10 Mar '98

10 Mar '98

thanks for the xsvga.rpm ... this allowed me to see more than 320x204 on my toshiba tecra 750cdt. till ironing out the ugliness of the fonts, though (they're all stretched out and like 30dpi or so). -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] SAMBA problems
by pbleser＠prov-liege.be 10 Mar '98

10 Mar '98

This is a multi-part message in MIME format. ------=_NextPart_000_0031_01BD4C11.45BF1E70 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit OK, here's a (rather simple, but typical) configuration... I'll send you a more complex later... P.S.: I perfectly speak french & german, so if you prefer... Pascal -----Original Message----- From: Tom Schaefer <netd(a)fastrans.net> To: suse-linux-e(a)suse.com <suse-linux-e(a)suse.com> Date: Tuesday, March 10, 1998 2:21 AM Subject: Re: [S.u.S.E. Linux] SAMBA problems > >Pascal, > >Please post your working smb.conf. > >I have had problems also, as there are some newer hooks that need to be >adjusted since NT SP3 ... > >Thanks! >-tks- > > >Pascal Bleser wrote: > >> If you want more tips about a "NT & 95 vs Linux" network, 'mail with me' ;-) >> We have a 80-machines network with a primary (NT 4.0) domain server, >> DNS+DHCP+Apache on a Linux Server and many, many 95 & NT (as well as some >> Linux) hosts... > >-- >To get out of this list, please send email to majordomo(a)suse.com with >this text in its body: unsubscribe suse-linux-e > ------=_NextPart_000_0031_01BD4C11.45BF1E70 Content-Type: application/octet-stream; name="smb_conf.log" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="smb_conf.log" Here's the smb.conf SaMBa configuration file of a host called 'Student' in a workgroup called 'NT_LPO'... The domain server (password server) is a NT host called 'Neptune'. It's Samba v1.9.16p11 with S.u.S.E. 5.0 and suse-kernel 2.0.33 . This smb.conf doesn't contain many smart moves, but it's a good example configuration, I believe... I added some comments to try and make it clear to everybody; if there's still something that looks weird to you, just ask me - it'll be a pleasure to help you out !! Anyway, take a good look (and some time ;-) ) at the man page: > man smb.conf I'll send you a more complex configuration (another LAN) later (this afternoon or tomorrow). Have a nice day ! Pascal (pbleser(a)prov-liege.be) ----------------------------------------------------------------- bleser@Student:/etc > cat smb.conf [global] workgroup =3D NT_LPO guest account =3D nobody ; ^-- still have to create a proper account ;-) ; \ something like guest,samba or smbguest should be better browseable =3D yes ; public =3D yes ; ^-- watch it ! if you put "public =3D yes" here, the entire ; \ host will accessed through the "guest account" keep alive =3D 30 os level =3D 0 ; ^-- this defines the value given by Samba when a domain server ; : election happens... the higher, the better; in this case, ; : I don't want this host to take control over the domain, so ; : I put '0' (Nt uses 2 as a default, I think) - to take the ; : control of the domain, put something higher than 32 ; : (because 32 is the highest value for an NT host 8^D, and ; \ Samba can go up to 128) ; security =3D user ; ^-- if this is enabled (and the one below disabled, of course), ; : then the passwords the user uses to enter the share(s) are ; : the ones of the Linux host... on the contrary, if you set ; : security to server ("security =3D server"), then you must ; : specify the name (without \\) of the domain server ; : ('neptune' here) and the passwords will be validated by ; : that host. With that feature, users won't need to reenter ; : their username & password when they want to access a Samba ; : share (that's not "public", of course - no password needed ; : then: the user browses the share as the 'guest account') ; : because they've already entered it when they made their ; \ network neighborhood logon. security =3D server password server =3D neptune ; ^--'Neptune' is the NT domain server (remember: not \\Neptune, but = Neptune) printing =3D bsd printcap name =3D /etc/printcap load printers =3D yes auto services =3D public ; ^-- what services should automatically be available default service =3D public ; ^-- no idea, but "auto services" & "default service" should be = specified, ; \ it avoids some problems (host access denied, ...) server string =3D "Linux 2.0.33 [www-server]" ; ^-- the comment that will apear besides the host in the network = neighborhood hosts allow =3D 10.10. ; ^-- the only hosts that can access the current host have IP addresses = like: ; : 10.10.9.23, 10.10.89.243, 10.10.0.1, ... ... ; : it's optional, of course... you don't need to have a "hosts allow = =3D ..." line. ; \ I'm sure you already guessed it, but you can also put a "hosts = deny =3D ...". preserve case =3D yes ; ^-- if you don't put this, Samba will automatically convert filenames = into ; \ lowercase - you can override this in the each share =20 ; If you want Samba to act as a wins server, please set ; 'wins support =3D yes' wins support =3D no =20 ; If you want Samba to use an existing wins server, ; please uncomment the following line and replace ; the dummy with the wins server's ip number. ; wins server =3D 192.168.1.1 =20 [homes] comment =3D Home directories read only =3D yes create mode =3D 0750 =20 [public] ; ^-- this is a public repository where all users can browse into ; : to 'download' stuff... the only users who can write into it ; \ are part of the Linux group 'admin' (see: write list) comment =3D Public share browseable =3D yes public =3D yes write list =3D @admin path =3D /home/shared =20 [www] ; ^-- like this, admin users (group 'admin') and the webmaster ; (account 'web') can work on the index & stuff of the ; website (and they're the only ones who can access the ; share: "valid users =3D ..." combined with "public =3D no") comment =3D WebSite (htdocs) browseable =3D yes read only =3D no public =3D no path =3D /usr/local/httpd/htdocs valid users =3D web, @admin create mode =3D 0755 =20 [www.cgi] comment =3D WebSite (cgi-bin) browseable =3D yes read only =3D no public =3D no path =3D /usr/local/httpd/cgi-bin valid users =3D @admin, @cgi create mode =3D 0755 =20 [www.etc] comment =3D WebSite (Apache configuration) browseable =3D yes read only =3D yes public =3D no path =3D /etc/httpd valid users =3D @admin create mode =3D 0754 =20 [log] comment =3D System Logs browseable =3D yes read only =3D yes public =3D no path =3D /var/log valid users =3D @admin create mode =3D 0754 =20 [docs] comment =3D System Docs browseable =3D yes read only =3D yes public =3D no path =3D /usr/doc valid users =3D @admin,marechal create mode =3D 0754 =20 ; The following share gives all users access to the Server's CD drive, ; assuming it is mounted under /cd. To enable this share, please remove ; the semicolons before the lines ; ; [cdrom] ; comment =3D Linux CD-ROM ; path =3D /cd ; read only =3D yes ; locking =3D no =20 ;[printers] ; comment =3D All Printers ; browseable =3D no ; printable =3D yes ; public =3D no ; read only =3D yes ; create mode =3D 0700 ; directory =3D /tmp ------=_NextPart_000_0031_01BD4C11.45BF1E70-- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] [Fwd: "Sizing the Linux market, 1998" survey posted.]
by netd＠fastrans.net 10 Mar '98

10 Mar '98

This is a multi-part message in MIME format. --------------416A006871CE1156CCAF4A9A Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit --------------416A006871CE1156CCAF4A9A Content-Type: message/rfc822 Content-Transfer-Encoding: 7bit Content-Disposition: inline Received: from iiug.iiug.org ([206.175.175.254]) by maat.fastrans.net (8.8.8/8.6.12) with ESMTP id XAA12867 for <netd(a)fastrans.net>; Mon, 9 Mar 1998 23:27:43 -0600 (CST) Received: (from majordom@localhost) by iiug.iiug.org (8.7.5/8.7.3) id WAA18148; Mon, 9 Mar 1998 22:17:55 -0600 (CST) Received: from lacrosse.redhat.com (lacrosse.redhat.com [207.175.42.154]) by iiug.iiug.org (8.7.5/8.7.3) with ESMTP id WAA18144 for <linux-informix(a)iiug.org>; Mon, 9 Mar 1998 22:17:50 -0600 (CST) Received: from bobster.redhat.com (root(a)bobsled.redhat.com [199.183.24.65]) by lacrosse.redhat.com (8.8.7/8.8.7) with ESMTP id XAA17449 for <linux-informix(a)iiug.org>; Mon, 9 Mar 1998 23:17:45 -0500 Received: from bobster.redhat.com (bob@localhost [127.0.0.1]) by bobster.redhat.com (8.8.7/8.8.7) with ESMTP id XAA01730 for <linux-informix(a)iiug.org>; Mon, 9 Mar 1998 23:18:12 -0500 Message-Id: <199803100418.XAA01730(a)bobster.redhat.com> X-Mailer: exmh version 2.0zeta 7/24/97 To: linux-informix(a)iiug.org Subject: "Sizing the Linux market, 1998" survey posted. Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Mon, 09 Mar 1998 23:18:10 -0500 From: Bob Young <bob(a)redhat.com> Precedence: normal Reply-To: linux-informix(a)iiug.org For anyone interested, we've updated our survey of the known data on the Linux using market. It is available at: <A HREF="http://www.redhat.com"><A HREF="http://www.redhat.com</A">http://www.redhat.com</A</A>> under "about us" in the Whitepapers section. Based on the latest data from sources as diverse as Dr Dobbs to Datapro (Gartner Group) it would appear that the number of Linux users has doubled in the last 12 months. Cheers, Bob. Red Hat Software, Inc.----------------------------------------- Phone 919-547-0012 x227 Fax 919-547-0024 P.O. Box 13588 email: bob(a)redhat.com Research Triangle Park, NC 27709 <A HREF="http://www.redhat.com"><A HREF="http://www.redhat.com</A">http://www.redhat.com</A</A>> --------------416A006871CE1156CCAF4A9A-- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] SAMBA problems
by pbleser＠prov-liege.be 10 Mar '98

10 Mar '98

sorry, I had a problem with da mail server... I'm resending it to myself and to all of you ;-) -----Original Message----- From: Pascal Bleser <pbleser(a)prov-liege.be> To: suse-linux-e(a)suse.com <suse-linux-e(a)suse.com> Date: Tuesday, March 10, 1998 10:41 AM Subject: Re: [S.u.S.E. Linux] SAMBA problems >OK, here's a (rather simple, but typical) configuration... >I'll send you a more complex later... > >P.S.: I perfectly speak french & german, so if you prefer... > >Pascal > >-----Original Message----- >From: Tom Schaefer <netd(a)fastrans.net> >To: suse-linux-e(a)suse.com <suse-linux-e(a)suse.com> >Date: Tuesday, March 10, 1998 2:21 AM >Subject: Re: [S.u.S.E. Linux] SAMBA problems > > >> >>Pascal, >> >>Please post your working smb.conf. >> >>I have had problems also, as there are some newer hooks that need to be >>adjusted since NT SP3 ... >> >>Thanks! >>-tks- >> >> >>Pascal Bleser wrote: >> >>> If you want more tips about a "NT & 95 vs Linux" network, 'mail with me' >;-) >>> We have a 80-machines network with a primary (NT 4.0) domain server, >>> DNS+DHCP+Apache on a Linux Server and many, many 95 & NT (as well as some >>> Linux) hosts... >> >>-- >>To get out of this list, please send email to majordomo(a)suse.com with >>this text in its body: unsubscribe suse-linux-e >> > -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] SAMBA problems
by netd＠fastrans.net 10 Mar '98

10 Mar '98

Pascal, Please post your working smb.conf. I have had problems also, as there are some newer hooks that need to be adjusted since NT SP3 ... Thanks! -tks- Pascal Bleser wrote: > If you want more tips about a "NT & 95 vs Linux" network, 'mail with me' ;-) > We have a 80-machines network with a primary (NT 4.0) domain server, > DNS+DHCP+Apache on a Linux Server and many, many 95 & NT (as well as some > Linux) hosts... -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] FTP madness!
by gdoris＠shaw.wave.ca 10 Mar '98

10 Mar '98

I am also an aracnet.net customer..well, soon not to be. I have installed a cable modem and will let my aracnet subscription die. I've found their service to be very spotty over the last year. I suspect that they were the ones at fault (they would never admit it though). I can sometimes connect to aracnet and sometimes not. I'm not changing anything on my end. However, I can ALWAYS connect to work through CIS. What does that tell you??? Gerry -----Original Message----- From: jonathan(a)aracnet.net <jonathan(a)aracnet.net> To: suse-linux-e(a)suse.com <suse-linux-e(a)suse.com> Date: Monday, March 09, 1998 6:58 AM Subject: [S.u.S.E. Linux] FTP madness! > > >I have been having difficulty uploading my web page... >[<A HREF="http://www.aracnet.net/~jonathan/linux.html"><A HREF="http://www.aracnet.net/~jonathan/linux.html</A">http://www.aracnet.net/~jonathan/linux.html</A</A>> if you're interested] I use >command-line FTP (like a real man) and it would send all bytes and freeze at the >end. The result was a 0 byte file! I had to mail the file to the ISP and they >put it there. I complained, they said it was my end and I insisted it was >theirs. > >It happened again the other day, so I thought I would show them, rebooted to >Win95, fired up command-line FTP and... > >It worked. > >I refuse to be reliant on Wingdings for anything. Besides, the Internet is >Linux' playground! What's going on here? Any hints? Has anyone else had this >problem? > >--- >Jonathan Markevich <jonathan(a)aracnet.net> > >Pascal, n.: > A programming language named after a man who would turn over in >his grave if he knew about it. > >--- >jonathan(a)aracnet.net > >"He is now rising from affluence to poverty." > -- Mark Twain > >-- >To get out of this list, please send email to majordomo(a)suse.com with >this text in its body: unsubscribe suse-linux-e > -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] FTP madness!
by thehaas＠ravine.binary.net 09 Mar '98

09 Mar '98

> > I refuse to be reliant on Wingdings for anything. Besides, the Internet is > Linux' playground! What's going on here? Any hints? Has anyone else had this > problem? I've had similar problems with both RedHat and SuSE. Part of the problem is speed of the uart chip in my com port and there isn't much I can do about it (I have a 486/25mhz machine. I need a new computer). The thing that helped me the most is to install and configure setserial. Things will be much better then. good luck! - mikeh -- ============================================================================== || Mike Hostetler || || <A HREF="http://www.binary.net/thehaas"><A HREF="http://www.binary.net/thehaas</A">http://www.binary.net/thehaas</A</A>> || || email1: mhostetl(a)cse.unl.edu || || email2: thehaas(a)binary.net || ============================================================================== || `When you say "I wrote a program that crashed Windows", people just || || stare at you blankly and say "Hey, I got those with the system, || || *for free*".' - Linus Torvalds || ============================================================================== -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] ARP
by nero.internat.htl-braunau＠htlbraunau.asn-linz.ac.at 09 Mar '98

09 Mar '98

Kann mir irgendjemand sagen, ob es einen systemcall fuer die ARP Tabelle gibt? Da wir in der Schule einen DHCP Server benutzen, moechte ich anhand der Ethernetadresse die IP Adresse herausfinden, und dann in /etc/hosts eintragen. Michi -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] smb.conf
by pkirk＠enterprise-hr.com 09 Mar '98

09 Mar '98

Pascal, The Win95 machines use the c:\windows\HOSTS for name resolution and the Linux box address is in there. You're right about the SMB nor being set up properly. Question is how and why?:( Having rather publically said we could do this, I have to get a result here. If there's anything more you need, just send a reply. The guide I've been using is the Linux 5.1 manual and I've read the SAMBA howto and FAQ. The network details are as follows: Workgroup->enterprise Protocol->TCP/IP Linux IP address 102.54.100.166 Linux name->P166 Other IP addresses->102.54.100.10, 102.54.100.120, 102.54.100.5, etc. Other IP addresses->P10, P120, P5, etc. All listed in the /etc/hosts file and neatly pingable by address. Part of smb.conf is as follows... [global] workgroup = enterprise guest account = nobody keep alive = 30 os level = user printing = bsd printcap name = /etc/printcap load printers = yes wins support = no [homes] comment = home directory browseable = yes read only = yes create mode = 0750 Best regards, Patrick Kirk Enterprise Human Resources Tel: 0044 118 939 1122 Fax: 0044 118 939 3388 Executive Opportunities at www.enterprise-hr.com E-mail pkirk(a)enterprise-hr.com -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] ISDN
by marca＠netscout.com 09 Mar '98

09 Mar '98

No. just treat it like a regular modem, but set the speed faster. marc. Darren <gecko(a)freecar.com> on 03/07/98 10:11:17 PM Please respond to suse-linux-e(a)suse.com To: suse-linux-e(a)suse.com cc: (bcc: Marc Abrams) Subject: [S.u.S.E. Linux] ISDN Question: I have an external ISDN modem.. responds to AT commands through the serial port. .. do I need to compile ISDN support (and which modules) into the kernel? I kno w that most, if not all, of the options are for internal cards... and are not ne eded for external.. but are ANY needed...??? ---------------------------------- <A HREF="http://homepages.skylink.net/~gecko/index.html"><A HREF="http://homepages.skylink.net/~gecko/index.html</A">http://homepages.skylink.net/~gecko/index.html</A</A>> -----BEGIN GEEK CODE BLOCK----- Version: 3.1 GCS d+(-) s:+ a29 C++$ UL++>++++ P+++$ L++>++++ E? W+++$ N+(-) o? K- w+++$(--) O M-- V- PS-- PE++ Y++ PGP++ t+ 5 X R+ !tv b++++ DI+++ D++ G++>G+++ e h+ r* y+ ------END GEEK CODE BLOCK------ <A HREF="http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html"><A HREF="http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html</A">http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html</A</A>> ---------------------------------- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] SAMBA problems
by pbleser＠prov-liege.be 09 Mar '98

09 Mar '98

1) you can't ping your Linux box by name: that comes from the fact that you have a DNS installed on your network and your Linux box' name isn't in the database; 2) the linux box doesn't appear in the network neighborhood because of a bad samba configuration (or no samba config at all !): you have to configure Samba first !!! - or else, it won't appear in the network neighborhood... if you already have a /etc/smb.conf file, mail it to me - I'll tell you what's wrong or missing... If you want more tips about a "NT & 95 vs Linux" network, 'mail with me' ;-) We have a 80-machines network with a primary (NT 4.0) domain server, DNS+DHCP+Apache on a Linux Server and many, many 95 & NT (as well as some Linux) hosts... Have a lot of fun ! -----Original Message----- From: Patrick Kirk <pkirk(a)enterprise-hr.com> To: 'suse-linux-e(a)suse.com' <suse-linux-e(a)suse.com> Date: Monday, March 09, 1998 2:03 PM Subject: [S.u.S.E. Linux] SAMBA problems > >I have just installed Linux for the first time. The network is a tcp/ip >Win95 setup. I can ping all others machines on the network by name except >my Linux box. I can ping the linux box by ip address. I can also telnet in >from the Win95 boxes by ip address. The linux box does not appear in the >win95 network neighborhood. Obviously I can't use SAMBA shares until it >does. > >What am I doing wrong? > >Best regards, > >Patrick Kirk >Enterprise Human Resources >Tel: 0044 118 939 1122 Fax: 0044 118 939 3388 >Executive Opportunities at www.enterprise-hr.com E-mail >pkirk(a)enterprise-hr.com > > >-- >To get out of this list, please send email to majordomo(a)suse.com with >this text in its body: unsubscribe suse-linux-e > -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] SAMBA problems
by pkirk＠enterprise-hr.com 09 Mar '98

09 Mar '98

I have just installed Linux for the first time. The network is a tcp/ip Win95 setup. I can ping all others machines on the network by name except my Linux box. I can ping the linux box by ip address. I can also telnet in from the Win95 boxes by ip address. The linux box does not appear in the win95 network neighborhood. Obviously I can't use SAMBA shares until it does. What am I doing wrong? Best regards, Patrick Kirk Enterprise Human Resources Tel: 0044 118 939 1122 Fax: 0044 118 939 3388 Executive Opportunities at www.enterprise-hr.com E-mail pkirk(a)enterprise-hr.com -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] cannot get more than 8bpp
by gdoris＠shaw.wave.ca 09 Mar '98

09 Mar '98

I believe the Tseng driver and the Accel W32 driver for XF86 only support 8 bits maximum. Check the docs for the two servers to be sure. If you have an ET6000 based card it might work though. Gerry -----Original Message----- From: B Eubanks <eubanks(a)hiwaay.net> To: suse-linux-e(a)suse.com <suse-linux-e(a)suse.com> Date: Sunday, March 08, 1998 2:35 PM Subject: [S.u.S.E. Linux] cannot get more than 8bpp > >I just installed suse 5.1, and cannot seem to be able to get anything >more than 8 bpp at any resolution. > >My hardware definitley should support 24 bpp at 800x600. I have a >hercules dynamite power with 2MB which is supported directly from the >setup. > >When I issue the command "startx -- -bpp 16" or "startx -- -bpp 24" I >get screen garbage, and my system is then completly locked-up. > >1024x768 at 8bpp works great. I have tried using the W32 driver as well >as the suse_tseng driver with similar results. > >What am I missing? > >Thanks. >-- >To get out of this list, please send email to majordomo(a)suse.com with >this text in its body: unsubscribe suse-linux-e > -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] FTP madness!
by jonathan＠aracnet.net 09 Mar '98

09 Mar '98

I have been having difficulty uploading my web page... [<A HREF="http://www.aracnet.net/~jonathan/linux.html"><A HREF="http://www.aracnet.net/~jonathan/linux.html</A">http://www.aracnet.net/~jonathan/linux.html</A</A>> if you're interested] I use command-line FTP (like a real man) and it would send all bytes and freeze at the end. The result was a 0 byte file! I had to mail the file to the ISP and they put it there. I complained, they said it was my end and I insisted it was theirs. It happened again the other day, so I thought I would show them, rebooted to Win95, fired up command-line FTP and... It worked. I refuse to be reliant on Wingdings for anything. Besides, the Internet is Linux' playground! What's going on here? Any hints? Has anyone else had this problem? --- Jonathan Markevich <jonathan(a)aracnet.net> Pascal, n.: A programming language named after a man who would turn over in his grave if he knew about it. --- jonathan(a)aracnet.net "He is now rising from affluence to poverty." -- Mark Twain -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] Re: Com port snafu
by mantel＠suse.de 09 Mar '98

09 Mar '98

Hi, On Mon, 9 Mar 1998, Michael Lankton wrote: > I would like to get a small UPS, but linux is only configuring one of my > com ports at boot, and I need it for my modem. I am booting lilo. If I > boot with loadlin both of my com ports get configured, so I know it > isn't a hardware problem. I use SuSE 5.1, and the same thing occured in > RedHat 5.0 (for the 3 weeks I ran it anyway ;) ). > I hate to boot loadlin just to get both ports configured. I have > reached the point where I don't require windows anymore and was going to > remove it from my system. If anyone can suggest what the problem is I > would be indebted to you. I assume your second port uses a nonstandard setup so it works only after having been initialized by some DOS driver. Just look into /sbin/init.d/serial. Starting at about line 134 there is the manual configuration section. It's quite easy and commented in that file. You can specify any nonstandard I/O address or IRQ for your com ports. Hope it helps, Hubert -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] Com port snafu
by satan＠nfinity.com 09 Mar '98

09 Mar '98

I would like to get a small UPS, but linux is only configuring one of my com ports at boot, and I need it for my modem. I am booting lilo. If I boot with loadlin both of my com ports get configured, so I know it isn't a hardware problem. I use SuSE 5.1, and the same thing occured in RedHat 5.0 (for the 3 weeks I ran it anyway ;) ). I hate to boot loadlin just to get both ports configured. I have reached the point where I don't require windows anymore and was going to remove it from my system. If anyone can suggest what the problem is I would be indebted to you. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] ISDN
by devpoly＠crdp31.crdp-toulouse.fr 09 Mar '98

09 Mar '98

> > > Question: > > I have an external ISDN modem.. responds to AT commands through the serial port. > .. do I need to compile ISDN support (and which modules) into the kernel? I kno > w that most, if not all, of the options are for internal cards... and are not ne > eded for external.. but are ANY needed...??? > perhaps you may read the march issue of Linux Journal : it contains an article about this issue. > Cordialement, J-F Bardou -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Dynamic IP
by news-reply＠the-annexe.demon.co.uk 09 Mar '98

09 Mar '98

On Wed, 4 Mar 1998 10:47:25 +0100 (CET), you wrote: > and the IP adress of my provider is 192.168.0.1. Are you sure? That would imply that you are your own provider.. maybe. -- Richard <A HREF="http://platinum.ch.ic.ac.uk/richard"><A HREF="http://platinum.ch.ic.ac.uk/richard</A">http://platinum.ch.ic.ac.uk/richard</A</A>> -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] seyon : Telecommunication from linux
by alsani＠merwan.sunyerie.edu 09 Mar '98

09 Mar '98

Is it possible to use xhost + from a home computer if I'm using seyon to contact my account at school. Any suggestion is appreciated. M. Alsani -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Thanks to the SuSE Team
by "no\\chris123"＠netcom.ca/spam.suse.de 09 Mar '98

09 Mar '98

Yup: its a quiet revolution this one. LOL. Quiet, but consistant, with an eye on quality. Ch > ------------------------------------------------------------------------------ > hi there Dee, > I don't think I ever thanked you for your advice on SuSE 5.1. The CDs > and book finally arrived, there had been an oversight at LinuxMall which > caused the delay. > Anyway, SuSE is the best distribution I've used by far, and with KDE > beta3 it is even better. I had to bring my SuSE box in to work to show > off some biological modelling software I am using in my research, i.e., > SWARM which is developed on Linux. A couple of people converted to Linux > when they saw how far it has come in the last year or so, they were very > impressed. > I could not imagine the trouble I would have if I had to use NT or such. > All the tools we take for granted in Linux just aren't there, especially > data processing and general programming tools. Imagine the cost to set > up the equivelent on NT. > So thaks for your advice, it was very helpfull. > > Regards, > Matt > -- > Matt Aylward > Dept of Geography (GIS), UWA > email: maylward(a)sunny.gis.uwa.edu.au > Linux Lover and GIS Geek > ..............LINUX..................... > OS for the people by the people > -------------------------------------------------------------------------------- > > Regards > -Dee > > W.D.McKinney (Dee) -=- deem(a)wdm.com > No claim to fame, just saved by Grace. > -- > To get out of this list, please send email to majordomo(a)suse.com with > this text in its body: unsubscribe suse-linux-e -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Netscape 4.03
by n5xwb＠inetport.com 09 Mar '98

09 Mar '98

Ruud de Bruin wrote: > I've downloaded and installed Netscape 4.03. However, on some webpages I > receive the message "no plugin audio/mime". > > Is there a plugin available in Linux for sound and how do I enable this? > > Regards, Ruud. > > -- > He who smiles in a crisis has found someone to blame. > > -- > To get out of this list, please send email to majordomo(a)suse.com with > this text in its body: unsubscribe suse-linux-e Hey Ruud: I have download Communicator 4.04 Professional Ed. and it has worked with every site I have checked into. It also seem faster to me than older versions. I like the features it has (spell checker, addressbook). It is available from Netscape - try "<A HREF="ftp://ftp20.netscape.com"><A HREF="ftp://ftp20.netscape.com</A">ftp://ftp20.netscape.com</A</A>>" and search for a version that is under "Shipping" Good Luck. Oh Yes! It is designed to install in the directory /opt . 73 Donn aka N5XWB -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Thanks to the SuSE Team
by deem＠wdm.com 09 Mar '98

09 Mar '98

Tom Schaefer <netd(a)fastrans.net> wrote: > > > > Chris Herrnberger wrote: > > > [snip] ... However comming to Linux as a newcommer, I have found this > > particular distribution to be the easiest > > to learn on and get results from. This is important to people who dont have a > > unix background, as there will be enough fruitless nights at the computer, were > > things dont work out for us, that it helps when potential incompatibilities are > > resolved in advance by the caretakers of the distribution. .. [snip] Yes and read this one below I recieved today: ------------------------------------------------------------------------------ hi there Dee, I don't think I ever thanked you for your advice on SuSE 5.1. The CDs and book finally arrived, there had been an oversight at LinuxMall which caused the delay. Anyway, SuSE is the best distribution I've used by far, and with KDE beta3 it is even better. I had to bring my SuSE box in to work to show off some biological modelling software I am using in my research, i.e., SWARM which is developed on Linux. A couple of people converted to Linux when they saw how far it has come in the last year or so, they were very impressed. I could not imagine the trouble I would have if I had to use NT or such. All the tools we take for granted in Linux just aren't there, especially data processing and general programming tools. Imagine the cost to set up the equivelent on NT. So thaks for your advice, it was very helpfull. Regards, Matt -- Matt Aylward Dept of Geography (GIS), UWA email: maylward(a)sunny.gis.uwa.edu.au Linux Lover and GIS Geek ..............LINUX..................... OS for the people by the people -------------------------------------------------------------------------------- Regards -Dee W.D.McKinney (Dee) -=- deem(a)wdm.com No claim to fame, just saved by Grace. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] cannot get more than 8bpp
by n5xwb＠inetport.com 09 Mar '98

09 Mar '98

B Eubanks wrote: > I just installed suse 5.1, and cannot seem to be able to get anything > more than 8 bpp at any resolution. > > My hardware definitley should support 24 bpp at 800x600. I have a > hercules dynamite power with 2MB which is supported directly from the > setup. > > When I issue the command "startx -- -bpp 16" or "startx -- -bpp 24" I > get screen garbage, and my system is then completly locked-up. > > 1024x768 at 8bpp works great. I have tried using the W32 driver as well > as the suse_tseng driver with similar results. > > What am I missing? > > Thanks. > -- Hey B Eubanks: I think you can set the bpp using Yast. Yast will set it in /etc/rc.config. Secondly look in /etc/XF86Config I have seen it in both places. 73 Donn aka N5XWB -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Thanks to the SuSE Team
by netd＠fastrans.net 09 Mar '98

09 Mar '98

Chris Herrnberger wrote: > [snip] ... However comming to Linux as a newcommer, I have found this > particular distribution to be the easiest > to learn on and get results from. This is important to people who dont have a > unix background, as there will be enough fruitless nights at the computer, were > things dont work out for us, that it helps when potential incompatibilities are > resolved in advance by the caretakers of the distribution. .. [snip] Well said! -tks- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Thanks to the SuSE Team
by chris123＠netcom.ca 09 Mar '98

09 Mar '98

Richard Pepin wrote: > > On Sat, 7 Mar 1998, Chris Herrnbegrer wrote: > > > Now if people in Canada would only tune in, they might find something they > really like. > > > > Chris Herrnberger > > We are tuning in slowly. We even made our main local computer book store > in Montreal (Camelot) to keep S.u.S.E. in stock. > > -- > To get out of this list, please send email to majordomo(a)suse.com with > this text in its body: unsubscribe suse-linux-e Interesting, its slowly catching on here in Ottawa too, I meant this as a positive statement not a criticism, just in case you were wondering, It seems that there has been alot of care invested in organizing this distribution, and potential bugs are worked out in advance for clients. Not to nock RedHat, they do alot of things well and have chosen a path their own. This is also admirable. However comming to Linux as a newcommer, I have found this particular distribution to be the easiest to learn on and get results from. This is important to people who dont have a unix background, as there will be enough fruitless nights at the computer, were things dont work out for us, that it helps when potential incompatibilities are resolved in advance by the caretakers of the distribution. In this context, I meant that it would be good for Canadian newcommers to come to know this distribution. Best regards to Montreal Love the Old City on a frosty Saturday night chris -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] CompuServe with I4l
by hsattler＠csi.com 08 Mar '98

08 Mar '98

Hi, I'm fairly new to Linux but I think it's a system worth to work with it. The problem I have is that I cannot get a connection to CompuServe. I have a AVM B1 which already works with CAPI and ISDN4Linux. 1. How can I manually get a connection (with a terminal software)? 2. How must I4l be configured to let it automatically dial in? 3. Can CompuServe use the syncPPP connection? Thanks.... Hendrik Sattler hsattler(a)csi.com -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] Very very little problems... for you :)
by scastell＠wavenet.it 08 Mar '98

08 Mar '98

>A few quick guesses: >- could it be, that irq12 is used by some other device like an onboard >mouse (some systems use irq12 for that) I tried, from Dos, to run "msd" but nothing seems wrong: apparently, the Ethernet card is the only device using Irq 12. >- did you recompile or use a modul for eth0? if have a look at >/etc/conf.modules, search for ne2000 and correct io-adress and irq. I >have gotten mad with that one. I didn' t recompile yet... as I' m not so skilled, I prefer not to risk. The strange fact is that, during installation, it was recognized but then not! /etc/conf.modules is already ok: all options are set correctly. I' ve tried to insert some parameters to Lilo (append, etc. etc.) but it still does not work. >------------- >Suse uses my HP Deskjet 850C printer via "hpdj" driver (found in Yast >printer setup) but I' m unable to make it printing colors: black and white >only. :(((( What am I doing wrong? Any ideas?? >>------------- >>As window manager, I use FVWM95 in 640X480 (my old monitor does not allow >>higher resolutions) and there is a button bar on the top of the screen >>(FvwmBanner? FvwmButtons?) that exceed screen lenght, hiding a lot of >>buttons. I would like to resize it removing some of them (for example >>Xeyes and one of the clocks) and resize the Pager from 6 screens to 4. I >>succeded doing the last thing by editing .fvwm95rc but the size of the >>pager is unchanged: now I have 4 stretched rectangles! >>What can I do? >The buttons on the top is FvwmButtons. For the most part, it dynamicly >allocates sizes and you have to do little tricks to get it to a different >size. Try reading the man page `man FvwmButtons` for an idea on how to do >it. I don't remember off the top of my head. Thanks. Now it looks better but at any new installation with Yast, the configuration is switched back to the old one and I have to edit .fvwm95rc again to restore my settings: how do I tell Yast to use my configuration as default? ------------- I' ve configured Linux to access Internet through a modem and ppp connection but when I fire up the connection I get this in /var/log/messages: Mar 6 19:21:09 Voyager kernel: CSLIP: code copyright 1989 Regents of the University of California Mar 6 19:21:09 Voyager kernel: PPP: version 2.2.0 (dynamic channel allocation) Mar 6 19:21:09 Voyager kernel: PPP Dynamic channel allocation code copyright 1995 Caldera, Inc. Mar 6 19:21:09 Voyager kernel: PPP line discipline registered. Mar 6 19:21:09 Voyager kernel: registered device ppp0 Mar 6 19:21:09 Voyager pppd[802]: pppd 2.2.0 started by root, uid 0 Mar 6 19:21:10 Voyager chat[805]: send (ATZ^M) Mar 6 19:21:10 Voyager chat[805]: expect (OK) Mar 6 19:21:10 Voyager chat[805]: ATZ^M^M Mar 6 19:21:10 Voyager chat[805]: OK -- got it Mar 6 19:21:10 Voyager chat[805]: send (ATL2M1X4DTnumber^M) Mar 6 19:21:11 Voyager chat[805]: expect (name) Mar 6 19:21:11 Voyager chat[805]: ^M Mar 6 19:21:28 Voyager chat[805]: ATL2M1X4DTnumber^M^M Mar 6 19:21:28 Voyager chat[805]: CONNECT 33600/ARQ/V34/LAPM/V42BIS^M Mar 6 19:21:31 Voyager chat[805]: ^M Mar 6 19:21:31 Voyager chat[805]: ^M Mar 6 19:21:31 Voyager chat[805]: User Access Verification^M Mar 6 19:21:31 Voyager chat[805]: ^M Mar 6 19:21:31 Voyager chat[805]: Username -- got it Mar 6 19:21:31 Voyager chat[805]: send (myusername^M) Mar 6 19:21:31 Voyager chat[805]: expect (word) Mar 6 19:21:31 Voyager chat[805]: : myusername^M Mar 6 19:21:31 Voyager chat[805]: Password -- got it Mar 6 19:21:31 Voyager chat[805]: send (mypassword^M) Mar 6 19:21:32 Voyager chat[805]: expect (>) Mar 6 19:21:32 Voyager chat[805]: : ^M Mar 6 19:21:32 Voyager chat[805]: gw-ts1.wavenet.it> -- got it Mar 6 19:21:32 Voyager chat[805]: send (ppp default^M) Mar 6 19:21:32 Voyager pppd[802]: Serial connection established. Mar 6 19:21:33 Voyager pppd[802]: Using interface ppp0 Mar 6 19:21:33 Voyager pppd[802]: Connect: ppp0 <--> /dev/modem Mar 6 19:21:33 Voyager pppd[802]: sent [LCP ConfReq id=0x1 <mru 1500> <magic 0xb32cd551> <pcomp> <accomp>] Mar 6 19:21:35 Voyager pppd[802]: rcvd [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x6a5fcab> <pcomp> <accomp>] Mar 6 19:21:35 Voyager pppd[802]: sent [LCP ConfAck id=0x1 <asyncmap 0xa0000> <magic 0x6a5fcab> <pcomp> <accomp>] Mar 6 19:21:36 Voyager pppd[802]: sent [LCP ConfReq id=0x1 <mru 1500> <magic 0xb32cd551> <pcomp> <accomp>] Mar 6 19:21:36 Voyager pppd[802]: rcvd [LCP ConfAck id=0x1 <mru 1500> <magic 0xb32cd551> <pcomp> <accomp>] Mar 6 19:21:36 Voyager pppd[802]: sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <compress VJ 0f 01>] Mar 6 19:21:36 Voyager pppd[802]: sent [IPXCP ConfReq id=0x1 <network 0> <node 000051f86d52> <router proto 2> <complete>] Mar 6 19:21:36 Voyager pppd[802]: rcvd [IPCP ConfReq id=0x1 <compress VJ 0f 00> <addr remote.ip.address>] Mar 6 19:21:36 Voyager pppd[802]: sent [IPCP ConfAck id=0x1 <compress VJ 0f 00> <addr remote.ip.address>] Mar 6 19:21:36 Voyager pppd[802]: rcvd [IPCP ConfNak id=0x1 <addr local.ip.address>] Mar 6 19:21:36 Voyager pppd[802]: sent [IPCP ConfReq id=0x2 <addr local.ip.address> <compress VJ 0f 01>] Mar 6 19:21:36 Voyager pppd[802]: rcvd [LCP ProtRej id=0x2 80 2b 01 01 00 18 01 06 00 00 00 00 02 08 00 00 51 f8 6d 52 04 04 00 02 06 02] Mar 6 19:21:36 Voyager pppd[802]: rcvd [IPCP ConfAck id=0x2 <addr local.ip.address> <compress VJ 0f 01>] Mar 6 19:21:36 Voyager pppd[802]: local IP address local.ip.address Mar 6 19:21:36 Voyager pppd[802]: remote IP address remote.ip.address This is my connection script: # !/bin/bash /usr/sbin/pppd connect 'chat -v "" "ATZ" "OK" "ATL2M1X4DTnumber" "name" "myusername" "word" "mypassword" ">" "ppp default" "" ' /dev/modem 38400 debug crtscts modem defaultroute noipdefault remotename wavenet Is it correct? After login sequence all seems to be ok. ------------- Sometimes I get this in /var/log/messages Mar 6 20:00:00 Voyager /USR/SBIN/CRON[866]: (root) CMD (test -x /usr/sbin/faxqclean && /usr/sbin/faxqclean) What does it mean? ------------- I' ve found that I don' t have "nslookup" command (bash: command not found) and it' s true!! Which packet does it belong to? ------------- I' m trying to set up a screen saver via xlock but it always say "xlock: Can not get hostbyname" and it stops. I would like, after X minutes idle, to activate an animated screen saver, like 'dows does. What can I do? ------------- If it is not possible to use xlock, also a black screen is fine, but I' m unable to tell "xset" to blank the screen after X minutes idle. ------------- I would like to make Sendmail working in something like "off-line mode", that is, if I write and send an email using Pine, and I' m not connected to Internet at that moment, the mail is not sent immediately but it is queued and will be sent at the next mail check. How could I do this? ------------- Thanks for your patience. :) Bye. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] toshiba progress so far ...
by CharlesSchneider＠compuserve.com 08 Mar '98

08 Mar '98

Message text written by INTERNET:suse-linux-e@suse.com >If your monitor supports higher resolutions (read your monitor's documentation) then you can put these in your XF86Config file in the "Monitor" section. Make sure your monitor supports whatever you put or you could damage it. Neil Zanella nzanella(a)ganymede.cs.mun.ca< Hiya, Thanks but no matter what I put in for monitor, it fails to give any other results than what I mentioned in the last post. :( -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] PCI Sound
by deem＠wdm.com 08 Mar '98

08 Mar '98

Darren <gecko(a)freecar.com> wrote: > > Does anyone know of any work being done on PCI sound cards??? > > The good folks at 4Front Tech. are... of course. See <A HREF="http://www.4front-tech.com"><A HREF="http://www.4front-tech.com</A">http://www.4front-tech.com</A</A>> and the links they have to vendors selling PCI Sound Cards. Best Regards, Dee W.D.McKinney (Dee) -=- deem(a)wdm.com No claim to fame, just saved by Grace. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] cannot get more than 8bpp
by eubanks＠hiwaay.net 08 Mar '98

08 Mar '98

I just installed suse 5.1, and cannot seem to be able to get anything more than 8 bpp at any resolution. My hardware definitley should support 24 bpp at 800x600. I have a hercules dynamite power with 2MB which is supported directly from the setup. When I issue the command "startx -- -bpp 16" or "startx -- -bpp 24" I get screen garbage, and my system is then completly locked-up. 1024x768 at 8bpp works great. I have tried using the W32 driver as well as the suse_tseng driver with similar results. What am I missing? Thanks. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] willows twin sounds interesting - any taker
by jdkc＠woptura.com 08 Mar '98

08 Mar '98

#: startx -- -bpp <xx> (xx=bits) Darren wrote: > Is there a commandline way of change the bpp.. without having to edit the XF86co > nfig file??? > On 08-Mar-98 Michael Perry wrote: > >to run at 16 bpp. Having to change to another x windows session is easy > >but it would be nice to see wabi running within my current session. I > > ---------------------------------- > <A HREF="http://homepages.skylink.net/~gecko/index.html"><A HREF="http://homepages.skylink.net/~gecko/index.html</A">http://homepages.skylink.net/~gecko/index.html</A</A>> > -----BEGIN GEEK CODE BLOCK----- > Version: 3.1 > GCS d+(-) s:+ a29 C++$ UL++>++++ P+++$ L++>++++ E? W+++$ N+(-) o? K- > w+++$(--) O M-- V- PS-- PE++ Y++ PGP++ t+ 5 X R+ !tv b++++ DI+++ D++ > G++>G+++ e h+ r* y+ > ------END GEEK CODE BLOCK------ > <A HREF="http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html"><A HREF="http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html</A">http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html</A</A>> > ---------------------------------- > -- > To get out of this list, please send email to majordomo(a)suse.com with > this text in its body: unsubscribe suse-linux-e -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] PCI Sound
by gecko＠freecar.com 08 Mar '98

08 Mar '98

Does anyone know of any work being done on PCI sound cards??? ---------------------------------- <A HREF="http://homepages.skylink.net/~gecko/index.html"><A HREF="http://homepages.skylink.net/~gecko/index.html</A">http://homepages.skylink.net/~gecko/index.html</A</A>> -----BEGIN GEEK CODE BLOCK----- Version: 3.1 GCS d+(-) s:+ a29 C++$ UL++>++++ P+++$ L++>++++ E? W+++$ N+(-) o? K- w+++$(--) O M-- V- PS-- PE++ Y++ PGP++ t+ 5 X R+ !tv b++++ DI+++ D++ G++>G+++ e h+ r* y+ ------END GEEK CODE BLOCK------ <A HREF="http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html"><A HREF="http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html</A">http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html</A</A>> ---------------------------------- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

RE: [S.u.S.E. Linux] willows twin sounds interesting - any taker
by gecko＠freecar.com 08 Mar '98

08 Mar '98

Is there a commandline way of change the bpp.. without having to edit the XF86co nfig file??? On 08-Mar-98 Michael Perry wrote: >to run at 16 bpp. Having to change to another x windows session is easy >but it would be nice to see wabi running within my current session. I ---------------------------------- <A HREF="http://homepages.skylink.net/~gecko/index.html"><A HREF="http://homepages.skylink.net/~gecko/index.html</A">http://homepages.skylink.net/~gecko/index.html</A</A>> -----BEGIN GEEK CODE BLOCK----- Version: 3.1 GCS d+(-) s:+ a29 C++$ UL++>++++ P+++$ L++>++++ E? W+++$ N+(-) o? K- w+++$(--) O M-- V- PS-- PE++ Y++ PGP++ t+ 5 X R+ !tv b++++ DI+++ D++ G++>G+++ e h+ r* y+ ------END GEEK CODE BLOCK------ <A HREF="http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html"><A HREF="http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html</A">http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html</A</A>> ---------------------------------- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] databases under SuSE 5.1
by chris123＠netcom.ca 08 Mar '98

08 Mar '98

Hi Michael: . I have not tested > postgreSQL, mysql, or others.. When time permits check out mySQL. My friend uses it with a plugin for netscape/appache (cant remember wich one) and does some amazing stuff with it, as a stand alone system and in html. He uses it at home to convert his employer to the efficiency of linux and linux ported applications by presenting these amazing charts and data ta the office and no one can figure out where this stuff comes from...(heheheh) I will contact him to get this setup/config issues right and forward to you under seperate post. Interesting that your going through this exercise as I just started to do the same one, as our LUG, www.oclug.on.ca will be holding a session on data bases in April. Get back to you later ch -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] SCSI CD problems (Second try)
by helge.olsen＠mediasvar.se 08 Mar '98

08 Mar '98

At 10:13 1998-03-08 -0500, you wrote: > >Hi, > >I've been using kernal 2.0.30 since RH4.2 came out. The cd audio >running via IDE 4x cdrom has always been very smooth - running Zepplin >or classical. My only reason for posting this is to possibly help you >narrow down the problem.... > Ok. I suspect/hope that my old SCSI-1 driva may cause trouble, but have not been able to confirm that... Will try to boot the machine without it tonight, and then see what happens. I really hope that is the problem, so I don't have to replace my SCSI controller or CD (which both would be rather expensive to me). I need a new harddisk anyway, so I hope that changing it would solve the problem. Later, dudes! /Helge Olsen +--------+--------------------------------+-----------------------------+ | |Email: helge.olsen(a)mediasvar.se | Private: helolle(a)algonet.se | | | sysadm(a)mediasvar.se | | | +--------------------------------+-----------------------------+ | |Snail: Media Svar AB | Private: Helge M. Olsen | | | Att: Helge Olsen | Snail Hindsbogatan 25C | | | Box 364 | S-532 32 Skara | | | S-532 24 Skara | Sweden | | | Sweden | | | +--------------------------------+-----------------------------+ | |Tel: +46-(0)511-28510 | Private: +46-(0)511-21565 | | |Fax: +46-(0)511-28500 | GSM: +46-(0)707-166166 | +--------+--------------------------------+-----------------------------+ -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] Netscape 4.03
by rdebruin＠willow.cistron.nl 08 Mar '98

08 Mar '98

I've downloaded and installed Netscape 4.03. However, on some webpages I receive the message "no plugin audio/mime". Is there a plugin available in Linux for sound and how do I enable this? Regards, Ruud. -- He who smiles in a crisis has found someone to blame. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Yast and colors??
by stephan.martin＠stud.uni-erlangen.de 08 Mar '98

08 Mar '98

HihHo.. >And after a bit of configuring (recompiling the kernel and more...)=0D >the colors disappeared for terminal applications like Yast or "make=0D >menuconfig"=0D >on one of my PC's.=0D did you install oss/ open sound system for linux and configure it with soundconf ?? this will create a file called /root/.terminfo if you delete this, everything should be ok. (from suse support database) if it has another reason, i can=B4t help you...sorry.... o far...=00=00 -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] databases under SuSE 5.1
by mperry＠basin.com 08 Mar '98

08 Mar '98

I have recently had my company invest in a number of relational database solutions for a new project we are undertaking and have convinced many of them that a solution using Linux is a good one since many of the web and internet tools (apache, samba) are freely available. Now for the part that is interesting. We decided to develop a rather large asset management database that would support many different accounts we have and be available from a central LAN access point. Several databases were initially studied including Approach, Access, etc. I introduced people to ADABAS D as a reference point. Unfortunately, we have decided to implement after testing a solution using empress for linux for a number of reasons. The empress toolkiit includes quite nice motif tools for building, maintaining, and using a database. I am testing both solutions at home now. Just some preliminary notes about both for those interested in database stuff under SuSE: 1) adabas carries a big learning curve. I think softwareag needs to consider ways and means to introduce their product using printed materials more and not rely on web or html documentation. 2) many people would like to use adabas d but I believe do not know where to start with it. This means that people get frustrated and tend to look for solutions which will fulfill their needs. I think softwareag needs to build common tools like gui toolkits for people to use that are not longtime adabas d programmers. If a central X based database manager and sources available as printed materials were available newbie database managers would use ADABAS. Now for empress. I like empress because it offers rich toolkits by default for bulding relational database systems. It offers a gui sql toolkit which is something admittedly I needed to get started. The gui sql builder is quite nicely done. Other solutions which work well under SuSe include for me qddb which manages a lot of stuff for me like a cdrom collection, mail addresses, web sites, office stuff, projects, etc. This database program is easilyt set up and allows quite easy creation of databases by adding only one line to your /etc/profile. Im sorry to drone on like this but I think client/server database systems are quite important parts of things. The good news is that all these programs run quite well under SuSE 5.1. empress uses motif libraries extensively and was a piece of cake to install; adabas d installed but required me to hand edit files. empress does this for you. qddb is a rpm package and comes with suse. I have not tested postgreSQL, mysql, or others.. -- --Michael Perry-- mperry(a)basin.com -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] willows twin sounds interesting - any takers out there?
by mperry＠basin.com 08 Mar '98

08 Mar '98

In perusing the newsgroups, I found a reference and a website for a windows emulation library called willows twin which sounds quite interesting. You do not need windows sources installed and it is freely available (see www.willows.com). Is anyone using such a product out there? I am happy with wabi all things considered but I would like wabi to run at 16 bpp. Having to change to another x windows session is easy but it would be nice to see wabi running within my current session. I cannot for some reason run at 24 bit color mode with my matrox millenium 2mb card; perhaps not enough video memory. -- --Michael Perry-- mperry(a)basin.com -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Thanks to the SuSE Team
by deem＠wdm.com 08 Mar '98

08 Mar '98

Neil Zanella <nzanella(a)cs.mun.ca> wrote: > > > Out of curiosity, what are KDE and Kdm? > It's a display manager of sorts: See <A HREF="http://www.kde.org"><A HREF="http://www.kde.org</A">http://www.kde.org</A</A>> > > > > My solution was to go to your ftp site, download the new kdebase rpm, activate > > Yast and TADA......total time 5 minutes. > > BTW, does S.u.S.E Linux use RPM? > > Neil I take it you do not have SuSE and do not run SuSE ? Yes it fully supports RPM. See http:://www.suse.com for the English site. Best Regards -Dee W.D.McKinney (Dee) -=- deem(a)wdm.com No claim to fame, just saved by Grace. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re[2]: [S.u.S.E. Linux] Thanks to the SuSE Team
by mperry＠basin.com 08 Mar '98

08 Mar '98

Neil Zanella <nzanella(a)cs.mun.ca> wrote: > > > > Neil Zanella > nzanella(a)ganymede.cs.mun.ca > > On Sat, 7 Mar 1998, Chris Herrnbegrer wrote: > > > > > > > > > Hello SuSE Team: > > > > Just a simple thanks for making life easy. Have been monitoring the > KDE news > > site and watching all the problems people are having with the kde > install on > > RedHat 5.0; especially the PAM issue and all the problems it causes > with Kdm. > > Read everything and was rather timid to attempt this rather length > tango as I > > preferr the two step as a nubie. > > Out of curiosity, what are KDE and Kdm KDE is a new desktop or window manager or combination of things that provide an interesting and quite easily modifiable interface through click and drag. SuSE has made available all of the rpm's to install the window manager/desktop/programs/games/utilities/etc from their ftp site. So that answers your second question as well... SuSE does support rpm program management. Check out www.kde.org for some information on kde and what they are doing with it plus links to applications specifically written for kde. > > > > My solution was to go to your ftp site, download the new kdebase > rpm, activate > > Yast and TADA......total time 5 minutes. > > BTW, does S.u.S.E Linux use RPM? > > Neil > > -- > To get out of this list, please send email to majordomo(a)suse.com with > this text in its body: unsubscribe suse-linux-e -- --Michael Perry-- mperry(a)basin.com -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] toshiba progress so far ...
by nzanella＠cs.mun.ca 08 Mar '98

08 Mar '98

If your monitor supports higher resolutions (read your monitor's documentation) then you can put these in your XF86Config file in the "Monitor" section. Make sure your monitor supports whatever you put or you could damage it. Neil Zanella nzanella(a)ganymede.cs.mun.ca On Sun, 8 Mar 1998, Chuck Schneider wrote: > > Hiya, > > I thought I better give more info on what's happening: > > If I use XF86Setup and select all VGA stuff, everything works fine and it > closes writing the XF86Config file. Then, when I run xdm or startx, my > screen blanks out and I have to reboot. > > If I use XF86Setup and select SVGA stuff, it starts the SVGA server with a > 320x204 screen ... I get beautiful graphics, but I see only the top left > 1/4 of the desktop. > > Is there anyway to force this thing to use even at least 640x480? I'd > really want to use 1024x768, but I'd be grateful to get even 640x480. > > Here's what it says as it's starting (I did a startx > startx.txt) > > XFree86 Version 3.3.1 / X Window System > (protocol Version 11, revision 0, vendor release 6300) > Release Date: August 4 1997 > If the server is older than 6-12 months, or if your card is newer > than the above date, look for a newer version before reporting > problems. (see <A HREF="http://www.XFree86.Org/FAQ"><A HREF="http://www.XFree86.Org/FAQ</A">http://www.XFree86.Org/FAQ</A</A>>) > Operating System: Linux 2.0.32 i686 [ELF] > Configured drivers: > SVGA: server for SVGA graphics adaptors (Patchlevel 0): > NV1, STG2000, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b, > ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b, > ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, et3000, pvga1, wd90c00, > wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, ati, sis86c201, > sis86c202, sis86c205, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, > tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, > tgui9320lcd, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi, > tgui9440agi, tgui96xx, cyber938x, clgd5420, clgd5422, clgd5424, > clgd5426, clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, > clgd5480, clgd5462, clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, > clgd6235, clgd7541, clgd7542, clgd7543, clgd7548, clgd7555, ncr77c22, > ncr77c22e, cpq_avga, mga2064w, mga1064sg, mga2164w, oti067, oti077, > oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, ali2401, > cl6410, cl6412, cl6420, cl6440, video7, ct65520, ct65525, ct65530, > ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, ct65554, > ct65555, ct68554, ct64200, ct64300, ark1000vl, ark1000pv, ark2000pv, > ark2000mt, mx, realtek, AP6422, AT24, s3_virge, generic > (using VT number 7) > > XF86Config: /etc/XF86Config > (**) stands for supplied, (--) stands for probed/default values > (**) XKB: keycodes: "xfree86" > (**) XKB: types: "default" > (**) XKB: compat: "default" > (**) XKB: symbols: "us(pc101)" > (**) XKB: geometry: "pc" > (**) XKB: rules: "xfree86" > (**) XKB: model: "pc101" > (**) XKB: layout: "us" > (**) Mouse: type: PS/2, device: /dev/mouse, baudrate: 1200 > (**) SVGA: Graphics device ID: "Primary Card" > (**) SVGA: Monitor ID: "Primary Monitor" > (**) FontPath set to > "/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unsc > aled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type > 1,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/ > lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi" > (--) SVGA: PCI: S3 Unknown chipset (0x8c01) rev 5, Memory @ 0xf8000000 > (--) SVGA: chipset: generic > (--) SVGA: videoram: 64k > (**) SVGA: clocks: 28.15 28.32 28.32 28.32 > (**) SVGA: Using 8 bpp, Depth 8, Color weight: 666 > (--) SVGA: Using builtin driver modes > (--) SVGA: Builtin Mode: 320x200 > (--) SVGA: Virtual resolution set to 320x204 > (--) SVGA: SpeedUp code selection modified because virtualX != 1024 > (--) SVGA: Using XAA (XFree86 Acceleration Architecture) > (--) SVGA: XAA: No acceleration primitives defined. > -- > To get out of this list, please send email to majordomo(a)suse.com with > this text in its body: unsubscribe suse-linux-e > -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Thanks to the SuSE Team
by nzanella＠cs.mun.ca 08 Mar '98

08 Mar '98

Neil Zanella nzanella(a)ganymede.cs.mun.ca On Sat, 7 Mar 1998, Chris Herrnbegrer wrote: > > > > Hello SuSE Team: > > Just a simple thanks for making life easy. Have been monitoring the KDE news > site and watching all the problems people are having with the kde install on > RedHat 5.0; especially the PAM issue and all the problems it causes with Kdm. > Read everything and was rather timid to attempt this rather length tango as I > preferr the two step as a nubie. Out of curiosity, what are KDE and Kdm? > > My solution was to go to your ftp site, download the new kdebase rpm, activate > Yast and TADA......total time 5 minutes. BTW, does S.u.S.E Linux use RPM? Neil -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] SCSI CD problems (Second try)
by xerxes1＠ix.netcom.com 08 Mar '98

08 Mar '98

Hi, I've been using kernal 2.0.30 since RH4.2 came out. The cd audio running via IDE 4x cdrom has always been very smooth - running Zepplin or classical. My only reason for posting this is to possibly help you narrow down the problem.... > > On Sun, 8 Mar 1998, Urytr Z. Byfra (Helge M. Olsen) wrote: > > > > Let me repeat my question: Does anyone know what would cause jerky CD-audio > > with newer 2.0 kernels (post-2.0.27)? -- Governments should be changed like diapers - often and for the same reason. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] Thanks to the SuSE Team
by pepr＠mail.com 08 Mar '98

08 Mar '98

On Sat, 7 Mar 1998, Chris Herrnbegrer wrote: > Now if people in Canada would only tune in, they might find something they really like. > > Chris Herrnberger We are tuning in slowly. We even made our main local computer book store in Montreal (Camelot) to keep S.u.S.E. in stock. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] SCSI CD problems (Second try)
by helge.olsen＠mediasvar.se 08 Mar '98

08 Mar '98

At 20:20 1998-03-07 -0800, you wrote: > >Okay, maybe I'm smoking something, but my understanding of CD-ROMs playing >CDDA consists of a program sending the appropriate message to the SCSI >driver so that the "play" message gets sent across the SCSI bus to the >CDROM. I am unaware of any further need for the program (or any part >of the entire computer including the SCSI controller for that matter) >to interact further with the CDROM to keep it playing. A cdrom player >that shows the current time might need to do so, but to simply play >this is unecessary. > >What happens if you quit your CD player program after starting the disc >playing? > I tried that... Not better... It still is jerky... >Is your CD routed through your soundcard? If so, try routing it directly >to your speakers or stereo by using the headphone jack on the front. Does >it still skip? > Yep, tried that too. It is still the same.. Seems like the CD is spooked by something. >This may have to do with some use of the SCSI bus that is confusing the >CD-ROM.. but it seems unlikely to me that a CDROM would be confused by >signals sent to other targets. > >This jive with anyone else here? > >> SCSI ID 2: Seagate something SCSI-1 CCS hard drive (not sure what CCS >> means...) > >Common Command Set. The canonical SCSI-1. This is because stone-age >scsi was too extensible (read prone to incompatability). > Ok... Could it be that the old disk somehow confuses my CD? It is an old macintosh disk (from '94 I think), and that may not be a good thing (I guess)... Like I said before, when running X it's >-josh > /Helge Olsen +--------+--------------------------------+-----------------------------+ | |Email: helge.olsen(a)mediasvar.se | Private: helolle(a)algonet.se | | | sysadm(a)mediasvar.se | | | +--------------------------------+-----------------------------+ | |Snail: Media Svar AB | Private: Helge M. Olsen | | | Att: Helge Olsen | Snail Hindsbogatan 25C | | | Box 364 | S-532 32 Skara | | | S-532 24 Skara | Sweden | | | Sweden | | | +--------------------------------+-----------------------------+ | |Tel: +46-(0)511-28510 | Private: +46-(0)511-21565 | | |Fax: +46-(0)511-28500 | GSM: +46-(0)707-166166 | +--------+--------------------------------+-----------------------------+ -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] toshiba progress so far ...
by CharlesSchneider＠compuserve.com 08 Mar '98

08 Mar '98

Hiya, I thought I better give more info on what's happening: If I use XF86Setup and select all VGA stuff, everything works fine and it closes writing the XF86Config file. Then, when I run xdm or startx, my screen blanks out and I have to reboot. If I use XF86Setup and select SVGA stuff, it starts the SVGA server with a 320x204 screen ... I get beautiful graphics, but I see only the top left 1/4 of the desktop. Is there anyway to force this thing to use even at least 640x480? I'd really want to use 1024x768, but I'd be grateful to get even 640x480. Here's what it says as it's starting (I did a startx > startx.txt) XFree86 Version 3.3.1 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: August 4 1997 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see <A HREF="http://www.XFree86.Org/FAQ"><A HREF="http://www.XFree86.Org/FAQ</A">http://www.XFree86.Org/FAQ</A</A>>) Operating System: Linux 2.0.32 i686 [ELF] Configured drivers: SVGA: server for SVGA graphics adaptors (Patchlevel 0): NV1, STG2000, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, ati, sis86c201, sis86c202, sis86c205, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9320lcd, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, tgui96xx, cyber938x, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543, clgd7548, clgd7555, ncr77c22, ncr77c22e, cpq_avga, mga2064w, mga1064sg, mga2164w, oti067, oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct64200, ct64300, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek, AP6422, AT24, s3_virge, generic (using VT number 7) XF86Config: /etc/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: keycodes: "xfree86" (**) XKB: types: "default" (**) XKB: compat: "default" (**) XKB: symbols: "us(pc101)" (**) XKB: geometry: "pc" (**) XKB: rules: "xfree86" (**) XKB: model: "pc101" (**) XKB: layout: "us" (**) Mouse: type: PS/2, device: /dev/mouse, baudrate: 1200 (**) SVGA: Graphics device ID: "Primary Card" (**) SVGA: Monitor ID: "Primary Monitor" (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unsc aled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type 1,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/ lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi" (--) SVGA: PCI: S3 Unknown chipset (0x8c01) rev 5, Memory @ 0xf8000000 (--) SVGA: chipset: generic (--) SVGA: videoram: 64k (**) SVGA: clocks: 28.15 28.32 28.32 28.32 (**) SVGA: Using 8 bpp, Depth 8, Color weight: 666 (--) SVGA: Using builtin driver modes (--) SVGA: Builtin Mode: 320x200 (--) SVGA: Virtual resolution set to 320x204 (--) SVGA: SpeedUp code selection modified because virtualX != 1024 (--) SVGA: Using XAA (XFree86 Acceleration Architecture) (--) SVGA: XAA: No acceleration primitives defined. -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] ISDN
by gecko＠freecar.com 08 Mar '98

08 Mar '98

Question: I have an external ISDN modem.. responds to AT commands through the serial port. .. do I need to compile ISDN support (and which modules) into the kernel? I kno w that most, if not all, of the options are for internal cards... and are not ne eded for external.. but are ANY needed...??? ---------------------------------- <A HREF="http://homepages.skylink.net/~gecko/index.html"><A HREF="http://homepages.skylink.net/~gecko/index.html</A">http://homepages.skylink.net/~gecko/index.html</A</A>> -----BEGIN GEEK CODE BLOCK----- Version: 3.1 GCS d+(-) s:+ a29 C++$ UL++>++++ P+++$ L++>++++ E? W+++$ N+(-) o? K- w+++$(--) O M-- V- PS-- PE++ Y++ PGP++ t+ 5 X R+ !tv b++++ DI+++ D++ G++>G+++ e h+ r* y+ ------END GEEK CODE BLOCK------ <A HREF="http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html"><A HREF="http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html</A">http://krypton.mankato.msus.edu/~hayden/.codes/geek3.1.html</A</A>> ---------------------------------- -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

Re: [S.u.S.E. Linux] SCSI CD problems (Second try)
by jrodman＠tbw.net 08 Mar '98

08 Mar '98

On Sun, 8 Mar 1998, Urytr Z. Byfra (Helge M. Olsen) wrote: > > Let me repeat my question: Does anyone know what would cause jerky CD-audio > with newer 2.0 kernels (post-2.0.27)? I have ruled out heavy load on the > system, checked for IRQ/IO/DMA conflicts, but I still consider the PS/2 > mouse a possible problem (When moving the mouse around alot under X, it is > easier to produce the error), but there must be something else involved, as > the jerkiness is seen even after a fresh reboot, and running workbone right > after first login... Okay, maybe I'm smoking something, but my understanding of CD-ROMs playing CDDA consists of a program sending the appropriate message to the SCSI driver so that the "play" message gets sent across the SCSI bus to the CDROM. I am unaware of any further need for the program (or any part of the entire computer including the SCSI controller for that matter) to interact further with the CDROM to keep it playing. A cdrom player that shows the current time might need to do so, but to simply play this is unecessary. What happens if you quit your CD player program after starting the disc playing? Is your CD routed through your soundcard? If so, try routing it directly to your speakers or stereo by using the headphone jack on the front. Does it still skip? This may have to do with some use of the SCSI bus that is confusing the CD-ROM.. but it seems unlikely to me that a CDROM would be confused by signals sent to other targets. This jive with anyone else here? > SCSI ID 2: Seagate something SCSI-1 CCS hard drive (not sure what CCS > means...) Common Command Set. The canonical SCSI-1. This is because stone-age scsi was too extensible (read prone to incompatability). -josh -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] Thanks to the SuSE Team
by chris123＠netcom.ca 08 Mar '98

08 Mar '98

Hello SuSE Team: Just a simple thanks for making life easy. Have been monitoring the KDE news site and watching all the problems people are having with the kde install on RedHat 5.0; especially the PAM issue and all the problems it causes with Kdm. Read everything and was rather timid to attempt this rather length tango as I preferr the two step as a nubie. My solution was to go to your ftp site, download the new kdebase rpm, activate Yast and TADA......total time 5 minutes. Much appreciated, keep up the good work, as its impressive. Now if people in Canada would only tune in, they might find something they really like. Kant waite until Kde comes out with a spell checker.....LOL Chris Herrnberger -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0

[S.u.S.E. Linux] SCSI CD problems (Second try)
by helge.olsen＠mediasvar.se 08 Mar '98

08 Mar '98

Hello again Ok, since we goofed out in other directions on this one: Let me repeat my question: Does anyone know what would cause jerky CD-audio with newer 2.0 kernels (post-2.0.27)? I have ruled out heavy load on the system, checked for IRQ/IO/DMA conflicts, but I still consider the PS/2 mouse a possible problem (When moving the mouse around alot under X, it is easier to produce the error), but there must be something else involved, as the jerkiness is seen even after a fresh reboot, and running workbone right after first login... I tried running irqtune (a small utility to change IRQ priorities in linux), and boosted IRQ 11 (SCSI controller) to highest priority, but the problem is just the same... I have also tried another (Adaptec original) SCSI cable, but no luck with that... Again, the CD works just fine with data CDs, and is fine under looser95 with data AND audio... Is there anyone who is familiar enough with the Tekram driver or general kernel SCSI code to tell if there has been any significant changes since 2.0.27? I tried to boot my 2.0.27 kernel from diskette to get the system up, and again, the CD audio was fine. However, I feel that I want to run the newer kernel because it feels better when one knows that bugs have been fixed (like F00F and teardrop fix)... Again, my hardware: Tekram DC-390T SCSI-2 PCI controller SCSI ID 0: Pioneer DR-U12X SCSI-2 Cdrom SCSI ID 1: IBM OEM Fast SCSI-2 hard drive SCSI ID 2: Seagate something SCSI-1 CCS hard drive (not sure what CCS means...) PS/2 mouse, irq 12, Leadtek L2300 graphics, SB32 pnp sound, 3com etherlink III isa network card, K6-200 on a Soyo 5VA5 VX board (512 Kb cache), 32 Mb EDO Ram. Thanks in advance for any thoughts/suggestions. Helge M. Olsen /SysAdm/ Windows NT? Why?! -- To get out of this list, please send email to majordomo(a)suse.com with this text in its body: unsubscribe suse-linux-e

1 0