March 2019 - openSUSE Users - openSUSE Mailing Lists

[opensuse] default ipv6 route is lost (after a while)
by Per Jessen 14 Apr '19

14 Apr '19

I'm running Leap15 on a couple of small NanoPi Neo Air. The network is configured with dhcp and radvd, the latter also hands out the default route. Today I noticed that both had lost their default routes: nano1:~ # uptime 18:06:44 up 9 days 7:31, 1 user, load average: 0.00, 0.00, 0.00 nano1:~ # ip -6 route show 2001:db8::1::/64 dev wlan0 proto kernel metric 256 expires 85071sec pref medium fe80::/64 dev wlan0 proto kernel metric 256 pref medium After a reboot, the default route is back: nano1:~ # uptime 18:22:47 up 0:00, 1 user, load average: 1.03, 0.29, 0.10 nano1:~ # ip -6 route show 2001:db8::1::/64 dev wlan0 proto kernel metric 256 expires 86381sec pref medium fe80::/64 dev wlan0 proto kernel metric 256 pref medium default via fe80::1 dev wlan0 proto ra metric 1024 expires 1781sec hoplimit 64 pref medium I've put up some monitoring to try to determine when the route is lost, but why would it be lost at all?? -- Per Jessen, Zürich (9.2°C) http://www.cloudsuisse.com/ - your owncloud, hosted in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 45

[opensuse] Trying to use the 15.1 kernel on 15.0, NVidia crashes.
by Carlos E. R. 08 Apr '19

08 Apr '19

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Content-ID: <alpine.LSU.2.21.1903291107010.4036(a)Telcontar.valinor> Hi, As mentioned previously, I have a problem with hibernation, and I need to try if a more advanced kernel solves the problem. So I have installed the 15.1 kernel on 15.0 (instead of trying the TW kernel), and the 15.1 NVidia driver. So this is what I installed: cer@Telcontar:~> rpm -qa | grep -i kernel | sort kernel-default-4.12.14-lp150.12.48.1.x86_64 kernel-default-4.12.14-lp151.22.9.x86_64 kernel-default-devel-4.12.14-lp150.12.48.1.x86_64 kernel-default-devel-4.12.14-lp151.22.9.x86_64 kernel-devel-4.12.14-lp150.12.45.1.noarch kernel-devel-4.12.14-lp150.12.48.1.noarch (I do not see a 15.1 version in repo) kernel-docs-4.12.14-lp150.12.48.1.noarch (I do not see a 15.1 version in repo) kernel-firmware-20190118-lp150.2.12.1.noarch (I do not see a 15.1 version in repo) kernel-macros-4.12.14-lp150.12.48.1.noarch (I do not see a 15.1 version in repo) kernel-source-4.12.14-lp150.12.45.1.noarch kernel-source-4.12.14-lp150.12.48.1.noarch (I do not see a 15.1 version in repo) kernel-syms-4.12.14-lp150.12.48.1.x86_64 kernel-syms-4.12.14-lp151.22.9.x86_64 (I do not see a 15.1 version in repo) nfs-kernel-server-2.1.1-lp150.4.6.1.x86_64 texlive-l3kernel-2017.133.svn44483-lp150.5.4.noarch texlive-l3kernel-doc-2017.133.svn44483-lp150.5.4.noarch cer@Telcontar:~> rpm -qa | grep -i nvidia | sort nvidia-computeG03-340.107-lp151.12.2.x86_64 nvidia-gfxG03-kmp-default-340.107_k4.12.14_lp151.22-lp151.12.26.x86_64 nvidia-glG03-340.107-lp151.12.2.x86_64 nvidia-uvm-gfxG03-kmp-default-340.107_k4.12.14_lp151.22-lp151.12.25.x86_64 x11-video-nvidiaG03-340.107-lp151.12.2.x86_64 cer@Telcontar:~> uname -a Linux Telcontar 4.12.14-lp151.22-default #1 SMP Thu Feb 28 15:45:32 UTC 2019 (25279f0) x86_64 x86_64 x86_64 GNU/Linux cer@Telcontar:~> Graphic crashes - as I half feared: cer@Telcontar:~> startx xauth: file /home/cer/.serverauth.3927 does not exist X.Org X Server 1.19.6 Release Date: 2017-12-20 X Protocol Version 11, Revision 0 Build Operating System: openSUSE SUSE LINUX Current Operating System: Linux Telcontar 4.12.14-lp151.22-default #1 SMP Thu Feb 28 15:45:32 UTC 2019 (25279f0) x86_64 Kernel command line: BOOT_IMAGE=/vmlinuz-4.12.14-lp151.22-default root=UUID=ac173013-18ad-4c4e-921e-fd2ecfb56495 resume=/dev/disk/by-label/ssd-swap splash=verbose Build Date: 14 March 2019 12:00:00PM Current version of pixman: 0.34.0 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/home/cer/.local/share/xorg/Xorg.0.log", Time: Thu Mar 28 19:57:18 2019 (==) Using config file: "/etc/X11/xorg.conf" (==) Using config directory: "/etc/X11/xorg.conf.d" (==) Using system config directory "/usr/share/X11/xorg.conf.d" xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted) (EE) Fatal server error: (EE) no screens found(EE) (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. (EE) Please also check the log file at "/home/cer/.local/share/xorg/Xorg.0.log" for additional information. (EE) GA Arbitration: Cannot restore default device.(EE) Server terminated with error (1). Closing log file. V ^Cxinit: giving up xinit: unable to connect to X server: Connection refused xinit: unexpected signal 2 - ------------------------------------------------------------------------------------------- xinit failed. /usr/bin/Xorg is not setuid, maybe that's the reason? If so either use a display manager (strongly recommended) or adjust /etc/permissions.local and run "chkstat --system --set" afterwards cer@Telcontar:~> (I had to press ctrl-c to stop to get back the prompt) The "/home/cer/.local/share/xorg/Xorg.0.log" is attached. I don't see why it crashes, except that it says "Failed to initialize the NVIDIA kernel module.", but not why. It says to see syslog. The relevant portion is this: <10.6> 2019-03-28 19:56:54 Telcontar login - - - LOGIN ON tty2 BY cer <3.6> 2019-03-28 19:56:55 Telcontar systemd 1 - - Started Clamav antivirus Deamon. <3.6> 2019-03-28 19:56:55 Telcontar systemd 1 - - Starting Amavisd-new Virus Scanner interface... <3.6> 2019-03-28 19:56:56 Telcontar systemd 1 - - Started Amavisd-new Virus Scanner interface. <3.6> 2019-03-28 19:56:56 Telcontar systemd 1 - - Starting Postfix Mail Transport Agent... <3.6> 2019-03-28 19:56:56 Telcontar echo 3820 - - Starting mail service (Postfix) <3.6> 2019-03-28 19:56:58 Telcontar systemd 1 - - Started Postfix Mail Transport Agent. <3.6> 2019-03-28 19:56:58 Telcontar systemd 1 - - Started Command Scheduler. <3.6> 2019-03-28 19:56:58 Telcontar systemd 1 - - Reached target Multi-User System. <3.6> 2019-03-28 19:56:58 Telcontar systemd 1 - - Starting Plays a welcome sound when target multi-user is reached... <9.6> 2019-03-28 19:56:58 Telcontar cron 3917 - - (CRON) INFO (RANDOM_DELAY will be scaled with factor 31% if used.) <3.6> 2019-03-28 19:56:58 Telcontar systemd 1 - - Starting Update UTMP about System Runlevel Changes... <9.6> 2019-03-28 19:56:58 Telcontar cron 3917 - - (CRON) INFO (running with inotify support) <3.6> 2019-03-28 19:56:58 Telcontar systemd 1 - - Started Update UTMP about System Runlevel Changes. <3.6> 2019-03-28 19:56:58 Telcontar Mine - - - Saying hello world. <3.6> 2019-03-28 19:56:58 Telcontar systemd 1 - - Started Plays a welcome sound when target multi-user is reached. <3.6> 2019-03-28 19:57:45 Telcontar systemd 1 - - Starting Console Mouse manager... <1.6> 2019-03-28 19:57:45 Telcontar 3982 - - *** info [daemon/startup.c(136)]: <1.6> 2019-03-28 19:57:45 Telcontar 3982 - - Started gpm successfully. Entered daemon mode. <3.6> 2019-03-28 19:57:45 Telcontar systemd 1 - - Started Console Mouse manager. <4.6> 2019-03-28 19:58:14 Telcontar systemd-logind 1537 - - New session 3 of user cer. I started gpm in order to paste the error log in text mode, so I know the instant startx failed. (init 5 makes the video flash in text mode, machine had to be rebooted to recover) - -- Cheers Carlos E. R. (from 15.0 x86_64 at Telcontar) - ------------ End PGP Signed Message Verified 2019-03-29 11:07:01 ----------- - -- Cheers, Carlos E. R. (from openSUSE 15.0 x86_64 at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCXJ3xphwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVBO0An0lqiCCpGWDJlGNC7M6Y faGonoULAJ9zUTvSvbEosfN8qTKV1PKcue5GfA== =z2Va -----END PGP SIGNATURE-----

2 2

[opensuse] What multimedia player?
by Carlos E. R. 06 Apr '19

06 Apr '19

Hi, Amarok is dead. Well, it is going to die, there is no Qt5 version and it will be removed eventually. I was just using it, and it has bugs: it does not keep track of what I play, it says "never played" for everything. Then I remembered "banshee". Well, there is no banshee on 15.0. What else can I use on 15.0? -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

14 38

[opensuse] opensuse paste / how to open such a file correct
by Simon Becherer 01 Apr '19

01 Apr '19

Hi, i was trying to use suse paste to ask here a question for a specific file, but i did not managed to upload it. is opensuse paste working? susepaste -e 10080 test.xls Pasted as: http://susepaste.org/22888346 http://paste.opensuse.org/22888346 Link is also in your clipboard. if i use that links, i get a http://susepaste.org/view//22888346 404 page not found. did anybody get this page? whats wrong? i tried also to bz2 this file and upload it, same problem: susepaste -e 10080 test.xls.bz2 Pasted as: http://susepaste.org/58851927 http://paste.opensuse.org/58851927 Link is also in your clipboard. ===== the original question to this file would be: how to open it? it will not be correct opened with libreoffice. if i change the .xls to .html it will be opened in firefox, and shown "partly" correct. "file" will show: test.xls: MIME entity, ISO-8859 text, with CRLF line terminators ================================= the file starts with: MIME-Version: 1.0^M X-Document-Type: Workbook^M Content-Type: multipart/related; boundary="----=_NextPart_01C3B8B1.6DB8B6D0"^M ^M Dieses Dokument wurde f.r die Anzeige in Microsoft Excel 2002 oder h.her formatiert. Sie verwenden eine fr.here Version von Excel.^M ^M ------=_NextPart_01C3B8B1.6DB8B6D0^M Content-Location: file:///C:/CE594991/xls.htm^M Content-Transfer-Encoding: quoted-printable^M Content-Type: text/html; charset="us-ascii"^M ^M <html xmlns:v=3D"urn:schemas-microsoft-com:vml"^M xmlns:o=3D"urn:schemas-microsoft-com:office:office"^M xmlns:x=3D"urn:schemas-microsoft-com:office:excel"^M xmlns=3D"http://www.w3.org/TR/REC-html40">^M ^M <head>^M <meta name=3D"Excel Workbook Frameset">^M <link rel=3DFile-List href=3D"xls_files/filelist.xml">^M <meta http-equiv=3DContent-Type content=3D"text/html; charset=3Dwindows-12=^M 52">^M <meta name=3DGenerator content=3D"Microsoft Excel 9">^M ^M <style>^M {mso-displayed-decimal-separator:"\.";^M <------>mso-displayed-thousand-separator:"\,";}^M tr^M <------>{mso-height-source:userset;}^M col^M <------>{mso-width-source:userset;}^M br^M <------>{mso-data-placement:same-cell;}^M .style0^M <------>{mso-number-format:General;^M <------>text-align:general;^M <------>vertical-align:bottom;^M <------>white-space:normal;^M ================================================= simoN -- www.becherer.de -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 18

[opensuse] Help request - apache? CMS?
by Stevens 01 Apr '19

01 Apr '19

I have a ubuntu box running apache and hosting 4 domains (websites) on it. Up till now I have been content to use Seamonkey wysiwyg editor to admin the pages but now I have a partner who wants to admin one of the domains remotely from his Win10 laptop. This has me in a bit of a tailspin trying to determine the best way to achieve this. 1) chown -R <webadmin>:<whatever group> <domain> to give him permissions to work in that directory tree and not any of the others. 2) I assume I should add some cms system. Wordpress is very popular but I know nothing about its use, capabilities, or configuration. 3) If I add cms functionality would he then have the ability to connect and edit via the web instead of having putty or some such on his puter? Sorry for all the dumb questions but this has never come up here before and searching has run me in circles. Thanks -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 7

[opensuse] char hex encoding html / xml?
by Simon Becherer 30 Mar '19

30 Mar '19

Hi, from: https://lists.opensuse.org/opensuse/2019-03/msg00320.html i have NOW a file: http://susepaste.org/47685312 first question would be what type of file is this (what language html or xml odr what?) maybe with the correct filename extention ".xxx" it would load correct into some software? i could load into firefox or libreoffice, libreoffice generates a excelsheet if i change .htm to .xls but how did i get the correct encoding, because i think it's not a real wrong encoding, its something i would call readable-hex-encoding ======== the line: mso-header-data:"&L&B&\0022Arial\0022&14Bedarfsanalyse f=FCr Auftrag: &B&= 8Datum: 25.03.2019 &10Auf-Nr: 1865.70&C&R"; the chars: =FC -> should be a german "u" with dots on top "ü" ============ or the line <td class=3Ds2 x:str>L=C4NGSTR=C4GER L  810</td> the chars: =C4 -> should be a german "A" with dots on top "Ä" =========== or the line: <td class=3Ds2 x:str>F=DCHRUNGSSCHIENE</td> the chars: =DC -> should be a german "U" with dots on top "Ü" ============= i found: https://www.ascii.cl/htmlcodes.htm where the hex number C4 points to the correct char. is there some tool who could handle this file correct, or translate the endcoding? simoN -- www.becherer.de -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 13

[opensuse] Unexpected block devices
by Ansgar Esztermann-Kirchner 29 Mar '19

29 Mar '19

Hello List, on two systems newly upgraded to Leap 15.0, I'm seeing strange block devices: e.g. with four HDDs, the system runs fine for a while (say, a week), then additional block devices /dev/sde ... /dev/sdh appear, and any process calling open() on them hangs in disk sleep. Has anyone seen something similar? Do you have any idea how to isolate the process that creates these? Thanks a lot, A. -- Ansgar Esztermann Sysadmin Dep. Theoretical and Computational Biophysics http://www.mpibpc.mpg.de/grubmueller/esztermann

3 3

[opensuse] Is there a way in Thunderbird to reflow a quoted paragraph?
by Carlos E. R. 28 Mar '19

28 Mar '19

Hi, well that's the question. Is there a way in Thunderbird to reflow a quoted paragraph? Say, I get this: > xxxxx xxxxxxxx xx xxx xxxxx xxxxx xxxxxxx xx x xxxxxxxxxxxxx x xxxxxx > xxxxxxxxxxxx > xxxxxxv xxxxxxxx xxxxxxxxxxxx xxxxxxxxx xxxxx x xxxxxxxxx xxxxx > xxxxxxxx > xx xxx xxxxx xxxxx xxxxxxx xx x xxxxxxxxxxxxx x xxxxxx > xxxxxxxxxxxx > xxxxxxv xxxxxxxx xxxxxxxxxxxx xxxxxxxxx xxxxx x xxxxxxxxx xxxxx > xxxxxxxx > xx xxx xxxxx xxxxx xxxxxxx xx x xxxxxxxxxxxxx x xxxxxx xxxxxxxxxxxx > xxxxxxv xxxxxxxx xxxxxxxxxxxx xxxxxxxxx xxxxx x xxxxxxxxx And I want to reflow to: > xxxxx xxxxxxxx xx xxx xxxxx xxxxx xxxxxxx xx x xxxxxxxxxxxxx x xxxxxx > xxxxxxxxxxxx xxxxxxv xxxxxxxx xxxxxxxxxxxx xxxxxxxxx xxxxx x xxxxxxxxx > xxxxx xxxxxxxx xx xxx xxxxx xxxxx xxxxxxx xx x xxxxxxxxxxxxx x xxxxxx > xxxxxxxxxxxx xxxxxxv xxxxxxxx xxxxxxxxxxxx xxxxxxxxx xxxxx x xxxxxxxxx > xxxxx xxxxxxxx xx xxx xxxxx xxxxx xxxxxxx xx x xxxxxxxxxxxxx x xxxxxx > xxxxxxxxxxxx xxxxxxv xxxxxxxx xxxxxxxxxxxx xxxxxxxxx xxxxx x xxxxxxxxx There are editors that have a key for that. -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

5 7

[opensuse] Changing Language
by A. den Oudsten 28 Mar '19

28 Mar '19

During install of Leap 15 I abusively chosed English instead of Dutch. Is their a simple way to correct that? T.i.a. André den Oudsten -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Self signed certificate
by Hermann-Josef Beckers 26 Mar '19

26 Mar '19

I'm behind a firewall with a self signed certificate (a *.cer file). Zypper (curl) complains: Error code: Curl error 60 Error message: SSL certificate problem: self signed certificate in certificate chain Where do I have to put it in the filesystem or must it be imported in some way? Thanks Hermann-Josef Beckers -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 10