August 2013 - openSUSE Users - openSUSE Mailing Lists

[opensuse] KMail on 12.3
by Mark Tinka 19 Aug '13

19 Aug '13

Hi all. I'm still running openSUSE 11.4 because the last time I attempted an upgrade to 12.1, it ended in tears where KMail2 was such a surprise, particularly how it got so bundled with Akonadi and friends. I ended up reverting to 11.4 and have been there since then. However, I can't help but feel like I'm not enjoying any advances in KMail and other applications on openSUSE, given I'm on a release that is no longer being supported. My main issue is KMail. Does anyone know whether the migration from KMail on 11.4 to KMail on 12.3 is now behaving? One issue I saw was some kind of problem between how KMail and KWallet are integrated in 12.3. Any useful feedback would be much appreciated. Thanks. Cheers, Mark. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 4

[opensuse] No Internet access after processor upgrade
by rm＠crescentconstruction.com 19 Aug '13

19 Aug '13

Opensuse list, I'm using openSUSE 12.1 (64 bit); KDE 4.7.2 I just upgraded the motherboard and processor to: ASUS Sabertooth 990FX R2.0 - motherboard AMD FX -8120 Processor Nvidia GeForce GT 610 Graphics card The system boots fine. Its connected via the ethernet to a local cisco router that has internet access. I can log into the router at 192.168.1.1 and access all of the router functions, so it would seem the network card, drivers, etc. are all functioning. For some reason, web browsers will connect to all the LAN devices (router, printer, scanner) but will not connect to WAN. I disabled the firewall. I checked the etc/resolv.conf file and it seems to be correctly writing 192.168.1.1 as the nameserver and 209.18.47.61 and 62 as the DNS entries. any ideas are appreciated, thanks, Regis -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 15

Re: [opensuse] No Internet access after processor upgrade
by rm＠crescentconstruction.com 18 Aug '13

18 Aug '13

> El 18/08/13 14:59, rm(a)crescentconstruction.com escribió: > >> any ideas are appreciated, > > # traceroute google.com > ends with what result exactly? > Here are the traceroute results: # traceroute google.com traceroute to google.com (2607:f8b0:4000:805::100e), 30 hops max, 40 byte packets using UDP Unable to connect to 2607:f8b0:4000:805::100e: Network is unreachable -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 3

[opensuse] Thunderbird problems
by Jim Sabatke 18 Aug '13

18 Aug '13

I've searched Thunderbird lists and have not found anything related to Linux lockups like I am having. I am running Suse 12.2 and just upgraded to Thunderbird 17.0.7. I have had this problem beginning several versions ago, for about the last year. The symptoms are: - I get "cannot connect to gmail server" errors. I have about a dozen gmail accounts active in Thunderbird and it doesn't say which account. I do get mail from some of them, but I haven't been able to determine if it is with a certain account. Some accounts do have very large amounts of emails in multiple folders. - Starting Thunderbird, very often it "locks up" and I cannot scroll up and down the list of accounts. Waiting for an hour or more doesn't help. - Even if I can scroll and select an account, often selecting a new email locks up that account. The selected message will not display, but I can usually select another account and read mail normally. - Often when replying to a message, the new message's input locks up after one or a few characters. I hate this solution, especially as it reeks of the typical Windows "fix" with killing processes or rebooting. Killing the Thunderbird processes, often requiring that to be done 6-10 times often restores full functionality. Sometimes that doesn't work at all and often rebooting "fixes" it. Any direction or ideas would be appreciated. Thanks, Jim -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 16

[opensuse] BT Sport on openSUSE
by michael norman 18 Aug '13

18 Aug '13

As a BT subscriber I have activated the BTSport app. Not entirely to my surprise when I just tried to watch the first live game using Firefox it told me it won't run without Silverlight. So a question : can I get Silverlight to run on openSUSE (using 12.3 64 bit) ? Will Moonlight do this, and if so can I get it to run on Firefox or Chrome ? I have not done any research on this yet as I am shortly going out to a live football match. I thought I'd just try it to see if it works. FWIW I have it running on a W7 box at the moment and its no great shakes on there having dropped out a couple of times already, and this running BT Infinity on a well maintained quite high spec box. It is my son's gaming box and is no slouch. Any thoughts about the central issue ie can I do it with Moonlight or something else on openSUSE ? I know I could run it on Windows in a vm or get the BT tv box but I'm not that bothered to do either of those things. Mike -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 6

[opensuse] Hard disk weirdness on an ancient laptop
by Carlos E. R. 18 Aug '13

18 Aug '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I got an ancient laptop (Pentium IV, 0.5GiB) as a present from a friend (you may remember the video problem I had with it, solved). It is "running" openSUSE 12.3. The hard disk it came with was totally useless. 20GB, full of write errors. So I bought a new one for it - I was lucky to locate a new unit with parallel IDE, 2.5" size, expensive for what it is: Hitachi Travelstar HD 2.5" 80GB IDE/ATA, 37.15€ plus 21% tax. Oh, well... no alternative. Well, I had located a 20GB unit, 15€ plus shipping, private person. Too small, probably. The 80GB unit I got from a reputable dealer, that I get almost all my hardware currently. The unit came sealed in its original bag. However... Smartctl test says it is an old unit: +++···················································· AmonLanc:~ # smartctl -a /dev/sda smartctl 6.0 2012-10-10 r3643 [i686-linux-3.7.10-1.1-default] (SUSE RPM) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Travelstar 5K160 Device Model: Hitachi HTS541680J9AT00 Serial Number: SB024CJGG8ZLMD LU WWN Device Id: 5 000cca 572c415d7 Firmware Version: SB2OA7AH User Capacity: 80,026,361,856 bytes [80.0 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 T13/1532D revision 1 Local Time is: Sat Aug 17 23:02:46 2013 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled ... SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0 3 Spin_Up_Time 0x0007 162 162 033 Pre-fail Always - 1 4 Start_Stop_Count 0x0012 094 094 000 Old_age Always - 10256 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0 9 Power_On_Hours 0x0012 056 056 000 Old_age Always - 19423 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 455 191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 58 193 Load_Cycle_Count 0x0012 099 099 000 Old_age Always - 10908 194 Temperature_Celsius 0x0002 177 177 000 Old_age Always - 31 (Min/Max 16/60) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 19423 - # 2 Extended captive Completed without error 00% 19399 - # 3 Short offline Completed without error 00% 19399 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. AmonLanc:~ # ····················································++- 19423 hours? How is that possible? And so many values at zero? If I am the victim of a fraud, surely it can not have 20Khours, right? That's too much for a laptop unit, they tend to break down earlier than 6000 hours. Maybe a refurbished disk, old chipset, new platter assembly? A bug in smartctl? - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) iEYEARECAAYFAlIP8/AACgkQtTMYHG2NR9XFFgCfUHFLReua+6mBgz2J5xho52Ua h/sAnA7Kmoehx1lkmKHJ/KVVcUbsbtF4 =lybL -----END PGP SIGNATURE-----

4 6

[opensuse] recommendations on new system
by Damian Ivanov 17 Aug '13

17 Aug '13

Hi guys, I am going for a new system in a few days and I wanted to ask if some had to share experience: 1) Which one has better performance on openSUSE? AMD FX 8320 (in a lot reviews it has the best performance per Euro :) ) vs Intel CPU at same price range 2) A few years ago the question would be clear if I should go nVidia or ATI but what about now? Anybody experience with SLI/Crossfire? My gf needs to run Sims3 via wine :) which needs quite lot GPU performance and even more RAM (8G min :D) 3) What about RAM should I go for lower latency or higher MHZ? Thanks in advance :) -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Odd messages about mariadb when upgrading from 12.2 to 12.3
by Per Jessen 17 Aug '13

17 Aug '13

I noticed the following during an upgrade (zypper dup): Installing: mariadb-5.5.32-1.4.2 ..........................[done] Additional rpm output: redirecting to systemctl stop mysql warning: /etc/my.cnf created as /etc/my.cnf.rpmnew warning: waiting to reestablish exclusive database lock warning: waiting to reestablish exclusive database lock redirecting to systemctl start mysql Job for n/a failed. See 'systemctl status n/a' and 'journalctl -n' for details. "n/a" ???? -- Per Jessen, Zürich (25.9°C) http://www.dns24.ch/ - free DNS hosting, made in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Slow file copying on openSUSE 12.3
by Roger Oberholtzer 17 Aug '13

17 Aug '13

I have done an installation of a new openSUSE 12.3 system. Amongst the odd problems I am having is slow file copying. It makes no difference what physical drives are involved. Copying an 80 MB takes 15-20 seconds. Bigger files taks correspondingly longer. It makes no difference if the copy is to the same directory or to a different partition or even a different disk. On a different 12.3 install with similar (not the same) hardware, the copy takes less than one second. Copying over the network to a computer in another city is faster... Copying to /dev/null is fast as expected. So it seems that it is the writing to a disk part that is the issue. The file systems are ext4 with the default settings used from installation. The system has these disks: [0:0:0:0] disk ATA WDC WD1000DHTZ-0 04.0 /dev/sda [1:0:0:0] disk ATA WDC WD2000FYYZ-0 01.0 /dev/sdb I see this in /var/log/messages, scsi 0:0:0:0: Direct-Access ATA WDC WD1000DHTZ-0 04.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 0:0:0:0: [sda] 4096-byte physical blocks sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA scsi 1:0:0:0: Direct-Access ATA WDC WD2000FYYZ-0 01.0 PQ: 0 ANSI: 5 ACPI: Invalid Power Resource to register! sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 1:0:0:0: [sdb] Attached SCSI disk sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk I do not see any complaints about the disks in the log file. To my eyes all looks as expected. Except for the slow speed. I am not sure what else to look at at this time. Anyone have any pointers? -- Yours sincerely, Roger Oberholtzer Ramböll RST / Systems Office: Int +46 10-615 60 20 Mobile: Int +46 70-815 1696 roger.oberholtzer(a)ramboll.se ________________________________________ Ramböll Sverige AB Krukmakargatan 21 P.O. Box 17009 SE-104 62 Stockholm, Sweden www.rambollrst.se -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

10 36

[opensuse] video problem with an ancient laptop
by Carlos E. R. 16 Aug '13

16 Aug '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I got an ancient laptop from a friend; he thinks that with only 512 MiB of RAM it is worthless ;-) It has a "Intel(R) Pentium(R) 4 CPU 2.80GHz" CPU and the video is "Intel Corporation i845" from "Uniwill Computer Corp". The doc says "Intel® Extreme Graphics" The video is the problem. I tested Puppy Wary 5.2 - it works fine. It detects the video card but not the monitor, so I select from a list: 1024x768x16 h31.5-49,5v56-72. This works, fills the entire screen. I don't know if it is the maximum resolution, the documentation does not say (only that is «TFT 14” (N618) or 15” (N619-N620) XGA». The wikipedia lists XGA as "XGA 1024 768 4:3 0.786" (http://en.wikipedia.org/wiki/XGA#XGA_.281024.C3.97768.29) so it seems I have it right. During installation of openSUSE from DVD went perfect - slow, but uneventful. But on reboot, the display is incorrect. It looks like this +-------------------------------------+ | . | | . | | . | | 1 . 2 | | . | | . | | . | | . | |·····································| | | | | | 3 | | | | | +-------------------------------------+ Area '3' is bright white, '2' is black. The working area is only '1'. It is the same in text mode as in graphical mode. Using "nomodeset" I get an apparent resolution of 640x480, centered with wide black border, and no white region; thus usable, but much less than what the machine is capable off. I have removed plymouth and I'm booting to text mode. The normal kernel boot parameters are; showopts splash=verbose loglevel=3 console=tty1 display=1024x768 which does not work. Without "display=" I get the same results. I have not found documentation for the display option under "/usr/src/linux/Documentation" tree, so I do not know what to try there. At the moment I use: showopts splash=verbose console=tty1 loglevel=3 plymouth.enable=0 nomodeset I have tried: modeset=0 display=1024x768 --> white region nomodeset display=1024x768 --> 640*480 nomodeset display=1024*768 --> 640*480 display=1024x768 --> white region All official updates are applied. For X, the release notes say to do: Section "Device" Identifier "Default Device" Driver "intellegacy" EndSection This makes X not to start: [ 375.163] (WW) Warning, couldn't open module intellegacy [ 375.163] (II) UnloadModule: "intellegacy" [ 375.163] (II) Unloading intellegacy [ 375.163] (EE) Failed to load module "intellegacy" (module does not exist, 0) [ 375.163] (EE) No drivers available. :-O ! - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) iEYEARECAAYFAlIH8egACgkQtTMYHG2NR9UspgCeNsNiDZXs3aUGRB89f37uYU7B OkkAn3Vj7a3Ud/Hddp5P2NHvnnLkM4A+ =t+0d -----END PGP SIGNATURE-----

5 19

[opensuse] after kernel upgrade - mount.nfs says "protocol not supported".
by Per Jessen 16 Aug '13

16 Aug '13

I am upgrading a 12.2 system to 12.3 and I decided I would start with the kernel (3.7.10-1.16). This system boots over PXE+TFTP+root-on-NFS, so I had to run mkinitrd with "-f nfs" (I don't know why mkinitrd didn't find out itself). When I try to boot with the newer kernel, I end up with mount.nfs saying "protocol not supported". The NFS server hasn't changed, it was running fine right up until I tried this kernel upgrade. I've reverted to the previous kernel (3.4.47-2.38). Any suggestions as to how to interpret "protocol not supported" ? -- Per Jessen, Zürich (21.8°C) http://www.dns24.ch/ - free DNS hosting, made in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 2

Re: [opensuse] virtualbox installation Solved
by constant＠indo.net.id 15 Aug '13

15 Aug '13

On Thursday, August 15, 2013 08:54:27 AM Jeffrey L. Taylor wrote: > Quoting constant(a)indo.net.id <constant(a)indo.net.id>: > > On my 12.2 KDE box I am planning to use a virtual product and > > after findingseveral help sites on howto install e.g > > virtualbox I started> > wondering aboutthe availability of a virtualbox in Yast. > > Why should I go to the Oracle website as suggested in a howto, > > if Yast offersme an installation. Is it not complete and do > > I need> > anything > > else? > > Went to Yast and installed virtualbox with the idea that > > openSUSE would giveme a workable piece of software. But now > > I am stuck as> > I have no idea how tobegin. Where is the documentation for > > the Suse> > virtualbox? > Install virtualbox, virtualbox-qt, and DKMS. Reboot. Run > VirtualBox, note> capitalization. If you need help, click the help icon and it > will pull up> the documentation. I moved a virtual hard drive from an > Ubuntu box that> used the Oracle package to OpenSuSE box with OpenSuSE > packages. Worked> fine. > Thanks Jeffrey, In the list of additional packages for virtualbox virtualbox-qt and DKMS were not included. Installed virtualbox-qt but did not find DKMS. Does nort seem to be necessary because now virtualbox works.Thanks all. wassimpler as I thought. Small Yast mistake . ___________________________________________________________ indomail - Your everyday mail - http://indomail.indo.net.id -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

Re: [opensuse] virtualbox installation
by constant＠indo.net.id 15 Aug '13

15 Aug '13

On Thursday, August 15, 2013 05:20:28 PM C wrote: > On Thu, Aug 15, 2013 at 5:03 PM, <constant(a)indo.net.id> wrote: > > On my 12.2 KDE box I am planning to use a virtual product and skipped > There is effectively no difference between the Oracle package > and the> openSUSE repo installed version. > > What problems are you having? You install it.. you start > it... you> install your gues operating systems into it. It is VERY easy > to use,> and very intuitive. If you need VirtualBox documentation, > then look> at http://www.VirtualBox.org There are no special tweaks for > openSUSE> (that I've noticed) other than the convenience of managing it > through> YaST. > Installed but the only virualbox item shown in the menu is vboxgtk which doesnothing. In konsole I get: ~> vboxgtk ERROR:root:Could not find any typelib for Gtk Traceback (most recent call last): File "/usr/bin/vboxgtk", line 93, in <module> import vboxgtk File "/usr/lib/python2.7/site-packages/vboxgtk/__init__.py", line 46, in<module> from iface import main File "/usr/lib/python2.7/site-packages/vboxgtk/iface.py", line 29, in<module> from gi.repository import Gtk ImportError: cannot import name Gtk ___________________________________________________________ indomail - Your everyday mail - http://indomail.indo.net.id -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] virtualbox installation
by constant＠indo.net.id 15 Aug '13

15 Aug '13

On my 12.2 KDE box I am planning to use a virtual product and after findingseveral help sites on howto install e.g virtualbox I started wondering aboutthe availability of a virtualbox in Yast. Why should I go to the Oracle website as suggested in a howto, if Yast offersme an installation. Is it not complete and do I need anything else? Went to Yast and installed virtualbox with the idea that openSUSE would giveme a workable piece of software. But now I am stuck as I have no idea how tobegin. Where is the documentation for the Suse virtualbox? ___________________________________________________________ indomail - Your everyday mail - http://indomail.indo.net.id -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 3

[opensuse] Tearing/stepping windows after updating to KDE4.11?
by C 15 Aug '13

15 Aug '13

I just bumped up to KDE4.11, and I'm seeing something "new". It's minor, but visually annoying when I notice it. Basically if I move a window left or right, the window redraw steps... a portion of the window is always leading the rest, and the step point.. the tear?... drifts up the window from bottom to top. Once it reaches the top it starts over at the bottom again. It's like a wave flowing upward in the window. glxinfo gives me this: ---------------------------------------------- OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce GTX 660 Ti/PCIe/SSE2 OpenGL version string: 4.3.0 NVIDIA 319.32 ---------------------------------------------- So, in theory it shouldn't be the video card.... Other info... uname -a Linux linux-s4o5.site 3.7.10-1.16-desktop #1 SMP PREEMPT Fri May 31 20:21:23 UTC 2013 (97c14ba) x86_64 x86_64 x86_64 GNU/Linux cat /proc/cpuinfo vendor_id : AuthenticAMD cpu family : 16 model : 4 model name : AMD Phenom(tm) II X4 965 Processor Any ideas on this one? C. -- openSUSE 12.3 x86_64, KDE 4.11 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] Systemd Question -Default.Target
by Upscope 15 Aug '13

15 Aug '13

I have been having issue on boot (12.3 see signature below) where it goes to a command line instead of the graphical interface, after doing an update in June. If I put a 5 at the end of the Linux line in grub2 menu, it goes to the graphical target. I finally think I found it today. /etc/systemd/system/Default target points to: Code --------- /usr/lib/systemd/system/multi-user.target ---------- /code Can I use the following code to fix this without messing up my system? (as found in a write on web search) Code ---------- rm /etc/systemd/system/default.target ln -sf /lib/systend/system/graphical.target /etc/systend/system/default.target ----------- /Code My 12.2 install points to: Code ---------- /usr/lib/systemd/system/graphical.target /Code ---------- Thanks for any response. -- openSUSE 12.3(Linux 3.10.5-1.g4e0ffc2-desktop)|KDE Ver. 4.11.00 |Intel core2duo 2.5 MHZ,|8GB DDR3|GeForce 8400GS(NVIDIA-Linux- x86_64-325.15) -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3

[opensuse] Creating the distro USB stick with a simple 'cp'
by Carlos E. R. 14 Aug '13

14 Aug '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Hi, A chap at the forums had failed to create the usb stick for installation following several published procedures. But he succeeded with this one: # cp image.iso /dev/sdX # sync And that's it! No more 'dd', or imagewrite, whatever. Just a cp to the raw device, umounted. Someone can explain why it works? Or why it should not work? Do we want to plublish this method on our wiki (for 13.1)? :-) He took the idea from here: <http://superuser.com/questions/620877/cp-command-to-make-bootable-iso-image…> The forum thread is here: View this thread: <http://forums.opensuse.org/showthread.php?t=489025> - -- Cheers Carlos E. R. (from 12.3 x86_64 "Dartmouth" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.16 (GNU/Linux) iF4EAREIAAYFAlIBWQIACgkQja8UbcUWM1x06gD/cj8JJr6bLSMtkilnAt3nuiBi rMVA+GtNft2TbekxMZYA/0qBRgRHy+jQBtAiQzAM1RcwDMQYENdV322PbGeeWHDT =Jxbn -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

10 32

[opensuse] Back to the basics (bash)
by Ciro Iriarte 14 Aug '13

14 Aug '13

Hi!, anybody can tell me why using "[]" sustitution for file listing works ciro@roamer:/tmp> ls -ld [123]b drwxr-xr-x 2 ciro users 4096 ago 10 16:22 1b drwxr-xr-x 2 ciro users 4096 ago 10 16:22 2b drwxr-xr-x 2 ciro users 4096 ago 10 16:22 3b But for file creation it doesn't? ciro@roamer:/tmp/bash> mkdir [123]dir ciro@roamer:/tmp/bash> touch [123].file ciro@roamer:/tmp/bash> ls -l total 4 drwxr-xr-x 2 ciro users 4096 ago 11 17:04 [123]dir -rw-r--r-- 1 ciro users 0 ago 11 17:04 [123].file Regards, -- Ciro Iriarte http://cyruspy.wordpress.com -- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 6

[opensuse] firefox/seamonkey causing KDEInit problems
by Daniel Bauer 13 Aug '13

13 Aug '13

Hello, working on coding web I have a dolphin-, several text- and several seamonkey- or firefox-windows open. One of a sudden I cannot open files with a click on entries in dolphin, also desktop-icons do not start anything anymore. I get messages like KDEInit cannot start „/usr/bin/kwrite“ or KDEInit cannot start „/bin/sh“ (messages translated from my german desktop) I now found out that this happens when I have firefox or seamonkey windows open. After closing all of them, everything works normal again after a few seconds. I can reproduce it: no other windows open: - click on dolphin desktop icon opens dophin staring firefox: - click on dolphin desktop icon causes the small jumping icon, but dolphin does not open closing firefox: - click on dolphin desktop icon icon opens dophin again normally The same happens with seamonkey. It does NOT happen with other browsers (as far as my short tests showed): opera, konqueror and chromium do not cause the problem. Opensuse 12.3 KDE 4.10 Firefox 23.0 (Firefox for Opensuse) SeaMonkey 2.19 I havn't found anything corresponding to the problems in the logs. Any ideas? Thanks for hints! Daniel Daniel Bauer photographer Basel Barcelona professional photography: http://www.daniel-bauer.com google+: https://plus.google.com/109534388657020287386 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 2

[opensuse] terms of use opensuse
by AHSAN RAZA 13 Aug '13

13 Aug '13

I want to know that it is written in opensuse agreement that me comply with export and host country laws. I want to know these question. 1.If a person violate his own country(for example Pakistan) law then the agreemen will be terminate or not? 2.captcha earning work is illegal according to u.s(united satates) but if a person do this work in his living country where this work is not illegal then the laws of u.s will be apply or the laws of living country will be apply? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] intel graphics with openSUSE 12.3
by Roger Oberholtzer 13 Aug '13

13 Aug '13

I have a new system with the following graphics: 00:02.0 VGA compatible controller: Intel Corporation Haswell Integrated Graphics Controller (rev 06) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation Device 2010 Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at f0000000 (64-bit, non-prefetchable) [size=4M] Memory at e0000000 (64-bit, prefetchable) [size=256M] I/O ports at f000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [d0] Power Management version 2 Capabilities: [a4] PCI Advanced Features The intel xf86 drivers are installed from xf86-video-intel-2.20.19-2.1.1.i586, which is the openSUSE 12.3 RPM However, the intel driver does not get used. Instead, the FBDEV driver is used. I see that it loads the intel driver (after trying the nvidia). There is no obvious complaint. It just goes on to the FBDEV. The only error I see in Xorg.0.log is: (EE) open /dev/dri/card0: No such file or directory There is no /dev/dri directory at all. I wonder what I missed.... -- Yours sincerely, Roger Oberholtzer Ramböll RST / Systems Office: Int +46 10-615 60 20 Mobile: Int +46 70-815 1696 roger.oberholtzer(a)ramboll.se ________________________________________ Ramböll Sverige AB Krukmakargatan 21 P.O. Box 17009 SE-104 62 Stockholm, Sweden www.rambollrst.se -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 6

[opensuse] OpenSuSE 12.3 and Yast Software Repositories Error
by Mark Hounschell 12 Aug '13

12 Aug '13

I was trying to configure a local packman repo mirror and after an unsuccessful attempt because of getting the URL wrong, I'm left with this message when clicking on "Software Repositories" in Yast. I have since successfully set it up but I can't get rid of this error??? All repos that enabled up are working including the packman mirror. Errors occurred while restoring the repository configuration. Error refreshing service Packman Repository (http://compro.packman.net/pub/linux/packman/suse/openSUSE_12.3/): Parse error: repoindex.xml[1] Opening and ending tag mismatch: meta line 1 and noscript The incorrect URL I originally entered is shown in the above error message. When I click continue all works. More info: harley:/home/markh # zypper refresh Repository 'nVidia Graphics Drivers' is up to date. Repository 'Packman Repository' is up to date. Repository 'libdvdcss repository' is up to date. Repository 'openSUSE-12.3-Non-Oss' is up to date. Repository 'openSUSE-12.3-Oss' is up to date. Repository 'openSUSE-12.3-Update' is up to date. Repository 'openSUSE-12.3-Update-Non-Oss' is up to date. All repositories have been refreshed. Any ideas? Thanks Mark -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 4

[opensuse] Help understanding new HTTPS breach?
by Greg Freemyer 12 Aug '13

12 Aug '13

All, I just saw: http://www.kb.cert.org/vuls/id/987798 It is a scary sounding attack since so much banking etc. is conducted via SSL Can someone explain the lifecycle of this attack to me? Does the vulnerability mean that an attacker could: - infect s PC (obviously linux is more difficult than windows, but Java vulnerabilities exist anywhere it is used) - use malware introduced via infection to query various banks and break SSL encryption key without the user even being logged into the protected website - watch network activity until a login to one of the banks in question occurs, then capture the login / password (Obviously, any ssl protected website could be similarly attacked. eg. gmail, salesforce, etc.) I assume that for a bad guy with the exploit in hand the hardest part of the above is monitoring the network activity at a low enough level to observe the compressed packets? Can software running with normal user privileges observe their own packets in that much detail, or does this attack require root access on the victim computer? Greg -- Greg Freemyer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 4

Re: [opensuse] OpenSuSE 12.3 and Yast Software Repositories Error
by Mark Hounschell 12 Aug '13

12 Aug '13

On 08/10/2013 07:17 AM, Damian Ivanov wrote: > Did you delete the old repository? Try minimal config aka only one repo > enabled. Hope this helps. > On Aug 9, 2013 3:20 PM, "Mark Hounschell" <markh(a)compro.net> wrote: > Yes, I deleted it but the message still appears when I start Yasts Software Repositories. Regards Mark -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] USB serial port on HP T1000 G3 UPS ?
by Per Jessen 12 Aug '13

12 Aug '13

I'm trying to use the HP Power Manager software which appears to require/expect a USB serial port when talking to the HP T1000 G3 UPS. The UPS _is_ connected via USB. The setup utility only works with /dev/ttySx but USB serial ports usually end up as /dev/ttyUSBx or in this case /dev/usb/hiddev0 .... -- Per Jessen, Zürich (21.1°C) http://www.dns24.ch/ - free DNS hosting, made in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 11