June 2013 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Darktable changes announcement
by toganm＠opensuse.org 20 Jun '13

20 Jun '13

Hi, This is an announcement for those of you using darktable from graphics repo or factory repo. There will be some changes in how darktable uses thumbnail cache files. If you encounter problems with this release please use bugzilla to report any findings. Because compression code is disabled previous cache may not work. Removing ~/.cache/darktable/mipmaps is necessary If you are not using graphics repo then you are not affected (yet). Factory repo takes time to get included but you can factory version from graphics. Thanks Togan Muftuoglu -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] cpupower
by Peter Maffter 20 Jun '13

20 Jun '13

Hello, I just tried to get some tool monitoring the actual CPU speed. SuSE 12.1, 64Bit has "cpupower" on the DVD. cpupower frequency-info analyzing CPU 0: driver: acpi-cpufreq CPUs which run at the same hardware frequency: 0 1 2 3 CPUs which need to have their frequency coordinated by software: 0 maximum transition latency: 10.0 us. hardware limits: 1.60 GHz - 3.30 GHz available frequency steps: 3.30 GHz, 3.30 GHz, 3.20 GHz, 3.10 GHz, 2.90 GHz, 2.80 GHz, 2.70 GHz, 2.60 GHz, 2.40 GHz, 2.30 GHz, 2.20 GHz, 2.10 GHz, 2.00 GHz, 1.80 GHz, 1.70 GHz, 1.60 GHz available cpufreq governors: conservative, userspace, powersave, ondemand, performance current policy: frequency should be within 1.60 GHz and 3.30 GHz. The governor "ondemand" may decide which speed to use within this range. current CPU frequency is 1.60 GHz (asserted by call to hardware). boost state support: Supported: no Active: no So current CPU frequency is 1.60 GHz and that is ok. When doing intensive work it goes up to 3.3GHz which is expected. But what does " boost state support: Supported: no Active: no" mean? Can I turn this on under SuSE? Processor is a Intel 2500K. Is there some graphical tool to monitor the CPU speed? Thanks in advance Pete -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Apparmour yast wizzard fails to see events.
by Carlos E. R. 20 Jun '13

20 Jun '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I have these events: cer@Telcontar:~> grep audit /var/log/messages | grep DENIED | grep -i dovecot <0.5> 2013-06-16 01:05:48 Telcontar kernel - - - [176548.548279] type=1400 audit(1371337548.983:1159): apparmor="DENIED" operation="exec" parent=1 profile="/usr/sbin/dovecot" name="/usr/bin/doveconf" pid=12892 comm="dovecot" requested_mask="x" denied_mask="x" fsuid=0 ouid=0 <0.5> 2013-06-16 01:08:10 Telcontar kernel - - - [176689.770610] type=1400 audit(1371337690.205:1196): apparmor="DENIED" operation="exec" parent=1 profile="/usr/sbin/dovecot" name="/usr/bin/doveconf" pid=13310 comm="dovecot" requested_mask="x" denied_mask="x" fsuid=0 ouid=0 cer@Telcontar:~> Yet YaST says there are no events. I have to set those profiles to complain, or dovecot fails. And those are not the only ones: <0.5> 2013-06-16 14:07:49 Telcontar kernel - - - [ 2131.773370] type=1400 audit(1371384469.493:259100): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/nscd" pid=1508 comm="nscd" pid=1508 comm="nscd" capability=36 capname="block_suspend" <0.5> 2013-06-16 14:07:50 Telcontar kernel - - - [ 2132.386954] type=1400 audit(1371384470.105:259101): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/nscd" pid=1508 comm="nscd" pid=1508 comm="nscd" capability=36 capname="block_suspend" <0.5> 2013-06-16 14:10:49 Telcontar kernel - - - [ 2311.509352] type=1400 audit(1371384649.228:259675): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/nscd" pid=1508 comm="nscd" pid=1508 comm="nscd" capability=36 capname="block_suspend" - -- Cheers Carlos E. R. (from 12.1 x86_64 "Asparagus" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) iEUEARECAAYFAlG9rKQACgkQtTMYHG2NR9XtoQCfWLbRzmrADTuqbi+Iayw8nN4F EZ0Al2DJtg3SrU9jOVQ92W+H+ZcXgII= =YPYa -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 4

[opensuse] gpt partition-table - parted - more than 16 partitions ?
by Per Jessen 20 Jun '13

20 Jun '13

I've got a setup with 64 partitions - how do I make it accessible from linux? I only seem to get the first 16 partitions: # l /dev/cciss/c0d0* brw-rw---- 1 root disk 104, 0 Jun 19 18:23 /dev/cciss/c0d0 brw-rw---- 1 root disk 104, 1 Jun 19 17:56 /dev/cciss/c0d0p1 brw-rw---- 1 root disk 104, 10 Jun 19 17:56 /dev/cciss/c0d0p10 brw-rw---- 1 root disk 104, 11 Jun 19 17:56 /dev/cciss/c0d0p11 brw-rw---- 1 root disk 104, 12 Jun 19 17:56 /dev/cciss/c0d0p12 brw-rw---- 1 root disk 104, 13 Jun 19 17:56 /dev/cciss/c0d0p13 brw-rw---- 1 root disk 104, 14 Jun 19 17:56 /dev/cciss/c0d0p14 brw-rw---- 1 root disk 104, 15 Jun 19 17:56 /dev/cciss/c0d0p15 brw-rw---- 1 root disk 104, 2 Jun 19 17:56 /dev/cciss/c0d0p2 brw-rw---- 1 root disk 104, 3 Jun 19 17:56 /dev/cciss/c0d0p3 brw-rw---- 1 root disk 104, 4 Jun 19 17:56 /dev/cciss/c0d0p4 brw-rw---- 1 root disk 104, 5 Jun 19 17:56 /dev/cciss/c0d0p5 brw-rw---- 1 root disk 104, 6 Jun 19 17:56 /dev/cciss/c0d0p6 brw-rw---- 1 root disk 104, 7 Jun 19 17:56 /dev/cciss/c0d0p7 brw-rw---- 1 root disk 104, 8 Jun 19 17:56 /dev/cciss/c0d0p8 brw-rw---- 1 root disk 104, 9 Jun 19 17:56 /dev/cciss/c0d0p9 /Per -- Per Jessen, Zürich (32.9°C) http://www.dns24.ch/ - free DNS hosting, made in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 8

[opensuse] Install LTSP on openSUSE12.3
by Jesús Reyes Piedra 20 Jun '13

20 Jun '13

Hi friends, I need help. I want install an thinclient server (LTSP) on openSUSE 12.3. A friend, send me :kiwi-ltsp-0.9.2-1.1.noarch.rpm, but the package need: kiwi-desc-ltsp . I apreciate if any body send me this package, to configure this server. T.I.A -- Jesús Reyes Piedra Admin Red Neurodearrollo,Cárdenas La caja decía:"Requiere windows 95 o superior"... Entonces instalé LINUX.

2 1

[opensuse] any ideas on how to make xrdp run?
by Linda Walsh 20 Jun '13

20 Jun '13

I'm trying to login to my linux box using a remote-desktop session from windows. It connects and lets me sign in to a sesman-Xvnc or sesmanXrdp .. but both get errors after login and disconnect and take me back to the "Login to xrdp" GUI running on the linux box -- i.e. I'm connecting to xrdp, but it isn't starting any sessions or desktops... The log says: [20130619-19:58:53] [WARN ] [init:45] libscp initialized [20130619-19:58:53] [CORE ] starting sesman with pid 43075 [20130619-19:58:53] [INFO ] listening... [20130619-19:59:32] [INFO ] scp thread on sck 7 started successfully [20130619-19:59:33] [INFO ] ++ created session (access granted): username law, ip 192.168.4.12:54461 - socket: 7 [20130619-19:59:33] [INFO ] starting X11rdp session... [20130619-19:59:42] [ERROR] X server for display 12 startup timeout [20130619-19:59:42] [INFO ] starting xrdp-sessvc - xpid=43108 - wmpid=43107 [20130619-19:59:43] [ERROR] X server for display 12 startup timeout [20130619-19:59:43] [ERROR] another Xserver is already active on display 12 [20130619-19:59:43] [DEBUG] aborting connection... [20130619-19:59:43] [INFO ] ++ terminated session: username law, display :12.0, session_pid 43102, ip 192.168.4.12:54461 - socket: 7 [20130619-19:59:52] [INFO ] scp thread on sck 7 started successfully [20130619-19:59:52] [INFO ] ++ created session (access granted): username law, ip 192.168.4.12:54471 - socket: 7 [20130619-19:59:52] [INFO ] starting Xvnc session... [20130619-20:00:02] [ERROR] X server for display 12 startup timeout [20130619-20:00:02] [INFO ] starting xrdp-sessvc - xpid=43144 - wmpid=43143 [20130619-20:00:02] [ERROR] X server for display 12 startup timeout [20130619-20:00:02] [ERROR] another Xserver is already active on display 12 [20130619-20:00:02] [DEBUG] aborting connection... [20130619-20:00:02] [INFO ] ++ terminated session: username law, display :12.0, session_pid 43138, ip 192.168.4.12:54471 - socket: 7 ------- I don't know what other Xserver it thinks is active on display 12 -- but it seems like a bogus messages. Ideas on how to get this running? Thanks! -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Shotwell refuses to import videos from my camera or folder on HD or card.
by Carlos E. R. 20 Jun '13

20 Jun '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 First time I use shotwell since upgrading from 12.1 to 12.3. First I was using the shotwell version in 12.3, it absolutely failed to import anything from anywhere. I had to abort several times. I had to update to the version in gnome:apps, version 0.14.1. I had to remove everything from the Pictures photo, plus all of /home/cer/.cache/shotwell and /home/cer/.local/share/shotwell, to force it to rescan the photos. Then I addded back all the photos in their folders to /home/cer/Pictures and started Shotwell. It recognized all the photos... except those two videos. They are in the same folder as some photos from this June; the photos it sees, not those two videos. So I delete all the June month events, and tell Showtwell to import from camera again. It imports the photos, and says the videos are repeated! And refuses to import them. I see the two videos in the "no event" entry. I select them, click "create event". It does... And labels them "Undated"! In fact, ALL my videos are in the "No event" entry! WHY? How can I put them on the correct date? Or force the damm thing to import them even if repeated? Or delete the entire database to force it to import ABSOLUTELY EVERYTHING? I can not edit those "no event" to move them to the proper event, even if I have to do that one by damm one. They are in the same /YEAR/MONTH/ folder structure as the rest... why can not it see them? Needless to say, this works with Gnome 2 in oS 11.4, same camera and photos and videos. I'm using XFCE in 12.3. I hate updating software, things break, instead of getting better :-/ - -- Cheers Carlos E. R. (from 12.3 x86_64 "Dartmouth" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) iEYEARECAAYFAlHCYsUACgkQtTMYHG2NR9UaUQCeJZRc48og00FSuF625b7ecalp I44An0kkhDbJkDztpef+a/C4divm1l1p =pb1t -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] google earth dependencies missing
by lynn 19 Jun '13

19 Jun '13

12.3 I install google-earth from http://www.google.es/intl/es_es/earth/download/thanks.html#os=linux#linux_d… but I get missing libraries: google-earth ./googleearth-bin: error while loading shared libraries: libfontconfig.so.1: cannot open shared object file: No such file or directory lynn@hh16:~> google-earth ./googleearth-bin: error while loading shared libraries: libX11.so.6: cannot open shared object file: No such file or directory lynn@hh16:~> google-earth ./googleearth-bin: error while loading shared libraries: libX11.so.6: cannot open shared object file: No such file or directory lynn@hh16:~> google-earth ./googleearth-bin: error while loading shared libraries: libXrender.so.1: cannot open shared object file: No such file or directory lynn@hh16:~> google-earth ./googleearth-bin: error while loading shared libraries: libXext.so.6: cannot open shared object file: No such file or directory I install the 32 bit libraries of whatever it says. I install what's missing, but where does it end? How do I install google earth? Thanks, L x -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 13

[opensuse] intel HD Graphics 4600 and such
by Roger Oberholtzer 19 Jun '13

19 Jun '13

We are putting together some new systems that should run openSUSE 12.1 and newer. (EOL on 12.1 I know...) Typically we have used Nvidia graphics cards. ATI are not popular here. Many of the systems we are considering use intel CPUs that include graphics hardware. Such as intel HD Graphics 4600 (on the intel Core i7 4770). So we thought we should investigate the status of this hardware. I started with http://en.opensuse.org/HCL:Video but that is very much out of date. Perhaps there is a better place with this information? We are not doing games. But we do use X's shared memory interface to show images as fast as possible. KDE does have it's bits that benefit from 3D hardware. Is anyone using intel graphics like this? Any stories / experiences / cautions to share? Yours sincerely, Roger Oberholtzer Ramböll RST / Systems Office: Int +46 10-615 60 20 Mobile: Int +46 70-815 1696 roger.oberholtzer(a)ramboll.se ________________________________________ Ramböll Sverige AB Krukmakargatan 21 P.O. Box 17009 SE-104 62 Stockholm, Sweden www.rambollrst.se -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 3

[opensuse] understanding DNS logs
by lynn 19 Jun '13

19 Jun '13

12.3 named with dyndns Hi Can any of our bind gurus tell me what all this stuff is? #0113600#011IN#011SOA#011 as in: 2013-06-18T17:32:37.282634+02:00 hh16 named[3794]: samba_dlz: subtracted rdataset hh3.site 'hh3.site.#0113600#011IN#011SOA#011hh16.hh3.site. hostmaster.hh3.site. 370 900 600 86400 0' 2013-06-18T17:32:37.284751+02:00 hh16 named[3794]: samba_dlz: added rdataset hh3.site 'hh3.site.#0113600#011IN#011SOA#011hh16.hh3.site. hostmaster.hh3.site. 371 900 600 86400 0' The updates are working but they are slow. It take several minutes to dig from another client. I wonder if the cryptic stuff has any clue in it. Thanks. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3