September 2006 - openSUSE Users - openSUSE Mailing Lists

[opensuse] lcurses
by Milan Baša 05 Sep '06

05 Sep '06

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi All. I am trying to compile piklab but without succes.(SuSe 10.1) - ----------------------------- /usr/lib/gcc/i586-suse-linux/4.1.0/../../../../i586-suse-linux/bin/ld: cannot find -lcurses collect2: ld returned 1 exit status make[3]: *** [piklab-prog] Error 1 make[3]: Leaving directory `/home/milan/apps/piklab-0.11.1/src/piklab-prog' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/home/milan/apps/piklab-0.11.1/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/milan/apps/piklab-0.11.1' make: *** [all] Error 2 - ---------------------------------- Where can i find lcurses? Thanks Milan. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFE++3lUfqTy0+NqSgRAvtQAJ9Fnr+XgMeng5+93HmfzKFGYnuOMgCcC2XG EmMwAi2GO470UE42peWkOFQ= =lUsW -----END PGP SIGNATURE----- --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

5 7

create filesystem on second HD
by DataIntellect 05 Sep '06

05 Sep '06

Hi list; I have a bay in my laptop for a 2nd hard drive. If I place a hard drive there, how can I access / use it. (I assume I'll have to create a new filesystem? ) Any guidance would be appreciated... Thanks in advance

3 2

Problem with ATI drivers in SUSE 10.1
by Clayton 05 Sep '06

05 Sep '06

Minor problem with getting the ATI drivers up and running on a 10.1 install. Video card is ATI X1300, monitor is Acer AL1916W (wide screen 1440x900 resolution) I've followed the instructions here: http://www.novell.com/coolsolutions/feature/17340.html And everything seems to go smoothly until I type in sax2 -r -m 0=fglrx Sax starts up and then the monitor goes out of range, and nothing is displayed. How can I get past this? How can I get SAX to start up with frequencies that will work with my monitor. I do know what the horizontal and vertical frequencies are supposed to be. C.

11 30

Re: [SLE] how to add (successfully) an installation source to SuSE 10.1???
by PerfectReign 05 Sep '06

05 Sep '06

On Mon, September 4, 2006 5:58 am, Hans van der Merwe wrote: > On Mon, 2006-09-04 at 05:35 -0700, PerfectReign wrote: and move it to the first place. >> > >> > Than I try to "finish" that page. It does not close !!!! >> > It is already one hour! >> Well, the speed of your processor is not in question. I've found >> that >> - on occasion - adding 10.1 sources has left the system in the >> "finish" stage for over an hour. This has happened on two machines. >> > > I guess other have said this already, but please switch to something > like Smart, until they fix the current rug/zmd utils/platform. > The current "broken" package manager updates the source files > everytime > you access any of the rug/zmd, update, software manager modules. Yes, now that I've got smart working, I can see my laptop happily downloading and installing some sixty odd updates. It appears several of them are the .i686 versions, which means they'll probably be faster. (just a hunch) I've told ZMD to go take a long hike off a short cliff in the meantime. -- Kai Ponte www.perfectreign.com || www.4thedadz.com remember - a turn signal is a statement, not a request

4 3

prism54 driver and WPA
by Hans du Plooy 05 Sep '06

05 Sep '06

Hi guys, I just migrated my wireless setup to WPA2 instead of WEP, only to find that my own workstation is the only box that can't connect. It's a Prism54 card, running SUSE 10.0 Is there any way to make it work, or does prism54 simply not support WPA? I thought of using ndiswrapper, but I haven't found windows drivers that work with the card, and the card itself is not branded, has no model number or any sort of identification on it. Thanks Hans

1 0

linux-2.6.18-rc5-git6-2 build driver
by Marc Collin 05 Sep '06

05 Sep '06

hi with linux-2.6.18-rc5-git6-2 kernel (suse factory i can't build webcam driver inux64:/home/collinm/Download/spca5xx-20060501 # make Building SPCA5XX driver for 2.5/2.6 kernel. Remember: you must have read/write access to your kernel source tree. make -C /lib/modules/`uname -r`/build SUBDIRS=/home/collinm/Download/spca5xx-20060501 CC=cc modules make[1]: Entering directory `/usr/src/linux-2.6.18-rc5-git6-2-obj/x86_64/default' make -C ../../../linux-2.6.18-rc5-git6-2 O=../linux-2.6.18-rc5-git6-2-obj/x86_64/default modules CC [M] /home/collinm/Download/spca5xx-20060501/drivers/usb/spca5xx.o /home/collinm/Download/spca5xx-20060501/drivers/usb/spca5xx.c: In function ‘spca5xx_open’: /home/collinm/Download/spca5xx-20060501/drivers/usb/spca5xx.c:2392: error: implicit declaration of function ‘video_devdata’ /home/collinm/Download/spca5xx-20060501/drivers/usb/spca5xx.c:2392: warning: initialization makes pointer from integer without a cast /home/collinm/Download/spca5xx-20060501/drivers/usb/spca5xx.c:2397: error: implicit declaration of function ‘video_get_drvdata’ /home/collinm/Download/spca5xx-20060501/drivers/usb/spca5xx.c:2397: warning: initialization makes pointer from integer without a cast /home/collinm/Download/spca5xx-20060501/drivers/usb/spca5xx.c: In function ‘spca5xx_close’: /home/collinm/Download/spca5xx-20060501/drivers/usb/spca5xx.c:2487: warning: initialization makes pointer from integer without a cast /home/collinm/Download/spca5xx-20060501/drivers/usb/spca5xx.c: In function ‘spca5xx_do_ioctl’: /home/collinm/Download/spca5xx-20060501/drivers/usb/spca5xx.c:2547: warning: initialization makes pointer from integer without a cast /home/collinm/Download/spca5xx-20060501/drivers/usb/spca5xx.c: In function ‘spca5xx_ioctl’: /home/collinm/Download/spca5xx-20060501/drivers/usb/spca5xx.c:3091: error: implicit declaration of function ‘video_usercopy’ /home/collinm/Download/spca5xx-20060501/drivers/usb/spca5xx.c: In function ‘spca5xx_read’: any idea?

2 1

Are there any problems to look out for when installing 10.1 on an AMD 64 Dual-Core?
by Thomas E. Beasley, Jr. 05 Sep '06

05 Sep '06

Hi all, Soon after 10.1 arrived on the scene, I purchased the DVD version and installed it on my Athlon XP2000. I had almost sorted it all out and had it running the way I like when the hard drive died. I replaced that and the memory went out soon after re-installing 10.1. So I ordered a new upgrade (AMD Dual-Core 64 3800) for my box. The upgraded computer should be ready for the installation of 10.1 by Tuesday evening. I have enjoyed SuSE on AMD Athlons since May, 2000 when I bought my first boxed version of SuSE (6.4). I've had many hours of uneventful installs installing SuSE on 32 bit computers since 7.2 (6.4 was anything but effortless). Is there anything about installing SuSE 10.1 on a 64 bit machine I should be aware of, or is the install on a 64 bit machine as easy as installing on a 32 bit machine? Thanks-Tom Thomas E. Beasley, Jr. - Registered Penguinista #308709 ttp://counter.li.org , Using Free Software since SuSE 6.4. Currently using OpenSuSE 10.1 with Gnome 2.12 and enjoying the Penguin :-)

5 4

Re: [SLE] fsch failed - getting after restart suse9
by Patrick Shanahan 05 Sep '06

05 Sep '06

* BOB HERZOG <herzogb(a)swdubois.k12.in.us> [09-05-06 15:41]: > Sever has been woking fine for 6 mo > > co worker restarted and now > > fsch failed for at least one file system (not /) > Please Repair manually and reboot. > > The root file system is already mounted read-write > > I've check the raid all the drive are working an check for > consistency. what to do. 1. Please start a new thread/message rather than replying to an old message and changing the Subject:. This is called 'hijacking' and causes problems with thread capable email clients and destroys researching the list archives. 2. I believe that 'fsch' is really 'fsck'. Search /var/log/messages for the errant device and run fsck on it. "man fsck" ie: fsck.ext3 /dev/hdc6 fsck.reiserfs /dev/hdc6 then restart your filesystem. You should be good to go. gud luk, ps: this reply will not appear tied to your question, as I started a new thread. -- Patrick Shanahan Registered Linux User #207535 http://wahoo.no-ip.org @ http://counter.li.org HOG # US1244711 Photo Album: http://wahoo.no-ip.org/gallery2

1 0

Unable to connect to Wireless Network
by Puneit Singh 05 Sep '06

05 Sep '06

Hello, Few weeks back I loaded SUSE10.1 on my laptop. Since then I was facing one problem or the other and many a times I had to reinstall as I was helpless and didn't know way out. I am sure there must have been solutions but to me back then reinstallation was the easiest option. In my latest installation the Wireless card went undetected last week I had posted in this list that I am unable to install the Intel Pro 2200 BG on my IBM R52 thinkpad. With valuable inputs I was able to do that. Now, comes another problem. The area I am putting up, has around 8-9 wireless networks, mostly unencrypted and the one of my campus is encrypted. I can connect to the unencrypted networks but not to my campus's network. The unencrypted networks are no good as they don't provide connectivity to the internet. (probably they are in testing phase or something) I had a talk with the system administrator. He told me that he has set the wireless configuration to 64 bit WEP passphrase on channel 8. He also told me that he doesn't clearly remember thing so he asked me to meet him again on Friday as that day he will show me the entire configuration. Now, my question is, since I am unable to connect, and I have an appointment with him; what should I look for. He is having little knowledge of Linux and operates a windows machine. What exactly happens is that when I select the desired wireless ESSID, the Knetwork manager progresses to 58 % where it says committing ip configuration and exits. Sometimes, it even exits at 27% where it says configuring the device. I did a tail -f /var/log/NetworkManager from console and at one point I read that DHCP took too long, more than 45 sec to connect. I had posted this problem of not able to connect sometime back also but didn't get much help on it. I hope someone can help me this time. -- Puneit Singh 0091-9350832020

2 6

Airvast Taiwan USB prism 3
by lostson 05 Sep '06

05 Sep '06

Hey All I have seen alot of mail coming through about wireless and thought I would try. I have a Airvast Taiwan USB prism 3 built in to my laptop. When i first installed suse 10.1 it worked like a charm. A few days ago it stopped. I figured maybe some updates messed it up. So i went through the logs and didnt see anything that would have. So I did a complete reinstall of 10.1 because on initial install it worked which made me quite happy and why i decided to stay with suse. Now after the new install it still doesn't work. I have now updated fully my setup and kde and still no joy. Does anyone else have this wireless adapter or any ideas i can use to solve this problem, thanks. -- LostSon http://www.lostsonsvault.org /\ \ \ \__/ \__/ \ \ (oo) (oo) \_\/~~\_/~~\_ _.-~===========~-._ (___________________) \_______/ I Want To Believe

1 0