March 2002 - openSUSE Users - openSUSE Mailing Lists

How to build back a rpm file from the installed rpm?
by Praise 27 Mar '02

27 Mar '02

Hi all! There is a way to rebuild a file program.rpm from its istalled files? Praise

3 2

FW: [suse-imap-e] New FW install
by Michael Garabedian 27 Mar '02

27 Mar '02

-----Original Message----- From: Michael Garabedian [mailto:mikejr@emergyscorp.com] Sent: Wednesday, March 27, 2002 1:40 PM To: suse-imap-e(a)suse.com Subject: [suse-imap-e] New FW install After I install the firewall packages... I start x and my mouse goes crazy -- To unsubscribe, e-mail: suse-imap-e-unsubscribe(a)suse.com For additional commands, e-mail: suse-imap-e-help(a)suse.com

1 0

SuSE 7.3 local CD install using DVD mounted over network for YaST2
by Monte Milanuk 27 Mar '02

27 Mar '02

I have a 7.3 box that is exporting the install DVD under /cdrom to the local LAN. I have another box that was installed via CDROM, because I get tired of fiddling around w/ boot disks. Now I want to change the installation sources to the DVD mounted via NFS. I go thru the steps to do this, but it never 'takes'. I can change the settings, Save&Exit, and come right back, and the settings I entered are gone. WTF? If I enter the settings, and select Next/Continue, it gripe a couple times about the install disc not matching the original disc 1, but gives me the option to skip it. How the heck do I get this straightened out so that a) YAST2 will retain the changed settings for the installation sources b) YAST2 will quit bitching about the DVD id being different from the CD1 id Thanks, Monte -- All right, breaks over. Back on your heads!! _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com

13 29

Re: [SLE] failed installation
by b stephen harding 27 Mar '02

27 Mar '02

On Wednesday 27 March 2002 12:47, you wrote: > Are you running these commands as yourself or as root? It may well make a > difference. There are some instructions for running it as a local copy, > try ./configure --help to display those. > > L > > >Did as you suggested but still get this error. Does it matter > >that the > >source is located in my home directory? Below is the last > >lines of output.... > > > >configure: creating ./config.status > >config.status: creating Makefile > >config.status: creating po/Makefile > >config.status: creating util/Makefile > >config.status: creating test/Makefile > >config.status: creating WINGs/Makefile > >config.status: error: cannot find input file: WINGs/Makefile.in > >bruce:/home/bsteph/WindowMaker-0.80.0 # I'm running as root. I've checked the --help file and the WindowMaker web site and found not help. Nothing relating to Wings.

1 0

Re: [SLE] A Faster System (and PC spring cleaning)(and no more windows)
by Darren Harmon 27 Mar '02

27 Mar '02

Hi; I've been having fun all day.:-) After opening up my PC and seeing the amount of dust thats built up over the year, I gave every thing a complete clean out (even removing the motherboard). I even used the Vaccum cleaner to clean the case out. Once I came to put back the ide cables I realised that I could have both of my hard drives using the ATA100 connectors on my Asus A7V motherboard. The final drive arrangements are as follows. 40Gig hd on primary ATA100 (master) 15Gig hd on Secondary ATA100 (master) DvD rom on primary ATA66 (master) cd -rw on secondary ATA66 (master) This solves my origional question below. Also I removed my Windows partition and am now running my system Windows free. It's only taken a year (I've got a lot of games, but now I have a Playstation 2:-) >I have a choice of hard disk setup options. Which one is faster for linux? > >1. Use Two hard drives at ATA66, in which I place the swap partition and VAR >partition on the other disk, so linux will access both disks at the same >time. (ie. opening a program and writing a log). > >2. Use one disk at ATA100. (only one disk due to the IDE cable not being >long enough - I have a full tower and some of the drive bays are quite away >from the motherboard) > >If 2. then will SuSE 7.2 support the Promise Ultra ATA100 controller on the >Asus A7V motherboard? > >Thanks for your help. > >I've explained in more detail my system situation below. > > > > > I have a choice of hard disk setup options. Which one is faster for > > > linux? > > > > > > 1. Use Two hard drives at ATA66, in which I place the swap partition > > > and VAR partition on the other disk, so linux will access both disks at > > > the same time. (ie. opening a program and writing a log). > > > > > > 2. Use one disk at ATA100. (only one disk due to the IDE cable not > > > being long enough - I have a full tower and some of the drive bays are > > > quite away from the motherboard) > > > > > > If 2. then will SuSE 7.2 support the Promise Ultra ATA100 controller on > > > the Asus A7V motherboard? > > > > > > Thanks for your help. > > > >Here's more details of the system. > > > >The above hard drive setup will use exactly the same components as I'm > > using now, so they are all compatable with SuSE. Both hard drives (EIDE) > > are of an identacle model (maxtor diamond max +) but one is 40Gb and one > > is 15Gb. I'm the only user on the system (my personal home desktop PC), > > with default desktop setup of SuSE 7.2 (updated to latest kernel, Xfree, > > etc). > > > >Here is a quick hardware list. > >1Ghz athlon > >512Mb of 133MHz RAM > >ASUS A7V motherboard On Wednesday 27 March 2002 12:57 am, scsijon wrote: > If you can afford it add the 40g drive, put it on the second ide cable / > bus (put your cdrom on the ata66's cable). Your motherboard is suppose to > be able to handle different speed bus on DIFFERENT cables without adding > wait's on the faster drive's cache (which is what you usually get if you > mix ata66 and ata100 on the same ide bus). Put your caches (yes you can > have more than one if you wish -up to 16 actually without patching) on the > start of the 40g as that means less head movement to use however unless > your using big databases or heavy memory using programs I would suspect > you would be doing little caching. > > and have fun > > scsijon > -- --------- Darren Harmon http://users.breathemail.net/darren.harmon1/

1 0

Re: [SLE] (OT) HP Toner/Drum question ...
by Uzo Kemdi Anyamele 27 Mar '02

27 Mar '02

On Tue, 2002-03-26 at 19:37, Jim Hatridge wrote: > Thanks for your note. Can you tell me what you like about the 5L and dislike? > Do you have any problems with the paper feeding into the printer? I had an > old Deckjet 500 that, at the end before I replaced it, had to push each > paper in by hand. A real PIA <G>. BTW how old is your printer? Hi Jim, Only one dislike; I cant find a memory module upgrade. Mine came with only 1Mb and under heavy load i.e whilst RTFM in SuSE 5.2 (remember then ?).I was guilty of felling the equatorial rain forest in kernel 2.0-pre9 or so. Try and find the 4 Mb upgrade which I think slots neatly in. And more importantly, avoid using very thin sheet like 80g. You will have to unassemble the unit, to clean out the mess. I did that twice. Phew !! Whilst perusing at a computer fair last weekend in London, I saw a 5L for £60.00 -- Kemdi IN_SuSE_d Since 5.2 123792 of counter.li.org ICQ:112290572

2 2

failed installation
by b stephen harding 27 Mar '02

27 Mar '02

Just tried to compile 0.8 Windowmaker for SuSE 7.3 Pro and it failed with the messages... config.status: error: cannot find input file: WINGs/Makefile.in I read the documentation and saw nothing regarding this, what do I do?

1 0

apache suse firewall2
by PR 27 Mar '02

27 Mar '02

I want to run a apache server (port 80) at 192.168.0.1 what settings must be altered for susefirewal2 when masq is on for 192.168.0.3 piet

4 9

RE: [SLE] basic networking in LAN with DHCP
by Eric Carbone 27 Mar '02

27 Mar '02

>> can you ping one laptop from the other laptop? > > No, I can't. > > I can't ping to the other named machine, as in <ping mu> > > If I do <ping mu> from the machine named "mu", it pings > itself just fine. > > Both machines appear to be set up for DHCP in the same > way, and can see the outer internet just fine, as in > when I ssh to my ISp's linux web server. They can't see > each other as named machines. Try pinging by IP address instead of machine name. (ping xxx.xxx.xxx.xxx) > How do I find out what ip address they have gotten > from the DHCP server in the router? ifconfig ------ Eric Carbone > > > I also can't see the Apple machines > > from the Linux boxes, or vice-versa. > > I'd like to make it so the Linux > > machines are visible & log-inable > > inside my LAN. > > You need to set up netatalk in order for the macs to see the linux machines > in the Chooser. > > Contact me off-line if you need help setting it up. > > To work the other way around (to see the macs from the linux machines) ... > well, i haven't tried it but here is the way to do it: > http://www.anders.com/projects/netatalk/mirror/afpfs-1.0b2q2.tar.gz > > > --------------------------- > Eric Carbone > > > > -----Original Message----- > From: tauzero.com/suse [mailto:suse@tauzero.com] > Sent: Tuesday, March 26, 2002 2:46 PM > To: SuSE > Subject: [SLE] basic networking in LAN with DHCP > > I have two laptops running SuSE Linux 7.3 as part of my home network. Both > are using 802.11b wireless, and hook up just fine through an Apple Airport > for access to the external internet - they are able to browse the Web, > fetch > > and send Pop email, do ssh to external machines, etc. The Airport is > connected vie ethernet to a 3Com ISDN modem with an integrated firewall and > ethernet hub; the DHCP is done on the 3Com box. They are also able to print > to an Axis printserver that I have connected to the 3Com box - they are > able > > to find it as a named computer, and address its print queue. I also have > six > > Apple Macs on the network; they are all able to see each other via Apple's > file sharing methods, and print, and access the external web . > > Here is the problem: I can't figure out how to go from one Linux laptop to > another, via rlogin, ssh, etc. I also can't see the Apple machines from the > Linux boxes, or vice-versa. I'd like to make it so the Linux machines are > visible & log-inable inside my LAN. > > This is probably dirt simple (I hope so anyway!), but I just lack the one > or > > two essential bits of know-how that I have not had the wit to glean from > the > > available documentation. > > I'd appreciate any advice & pointers. -- R o b T o w robtow(a)tauzero.com www.tauzero.com/Rob_Tow (408)-829-7407 * * his sword for hire * another faithless lord left, * the ronin walks on *

1 0

KDE 3/Adrian RPMs
by Anthony W. Marino 27 Mar '02

27 Mar '02

I've installed the KDE3 rpms from Adrian and have experienced a problem which doesn't allow me to open with KDE3. KDE2 work fine here, however. In general the message states that it can't find and/or make a network connection with ".DCOPserver-xxxxxx__0" (what happen to the ":" in the message as in ".DCOPserver-xxxxxx_:0"?). Any thoughts are appreciated!!! Anthony

1 0